- PTAB · Dec 16, 2025 · IPR2025-01046 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 2–15, finding a reasonable likelihood that the 1946 Cyclopedia, Lindström, and Wong render at least claim 2 obvious; claim 1 was disclaimed.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner responds that Petitioner’s proposed level of ordinary skill in the art is incorrect, “because design or analysis experience with other industrial wheeled vehicles would not necessarily be applicable to the art of the ’892 Patent.” Prelim. Resp. 12 (citing Ex. 2035 ¶¶ 38–39). According to Patent Owner, a person of ordinary skill in the art “would have at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Id. (citing Ex. 2035 ¶¶ 34, 38). The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years 5 Because Patent Owner statutorily disclaimed claim 1, this ground is moot. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 12. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted.” slip op. at 12
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge would not.” Prelim. Resp. 12–13 (citing Ex. 2035 ¶ 39). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this stage, we need not construe expressly any claim term to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing on at least one challenged claim. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))” slip op. at 14
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“been obvious over the 1946 Cyclopedia and Wong. Weighing the parties’ arguments and evidence, we find Petitioner provides sufficient rational underpinning for its assertion that it would have been obvious in view of Wong to implement a cross-wise extending beam to reinforce the 1946 Cyclopedia’s NSC ore car’s end slope sheet. Pet. 52–53; Prelim. Resp. 28– 30. In response to Petitioner’s assertion that “[t]he upper, outboard end of [Wong’s slope sheet 26] is reinforced by a cross-wise, L-shaped beam positioned under the slope sheet,” Patent Owner argues that “Wong does not provide reinforcement, but simply shows two sheets being connected for lading containment and load transfer.” Pet. 52; Prelim. Resp. 29. At this stage, we find Petitioner has the better position. Although we agree with Patent Owner that Wong shows two sheets connected to one another, that does not negate Petitioner’s correct observation that Wong shows an upper end of its end slope sheet 26 resting on an L-shaped structure, which apparently would reinforce end slope sheet. Pet. 52; Ex. 1003 ¶ 56. reason to look to Wong in the first place,” we again find that Petitioner has the better position at this stage. Prelim. Resp. 29. For example, Wong’s disclosure of “hopper railcar 10” (Ex. 1006, 3:6–9) and the 1946 Cyclopedia’s disclosure of “Freight Cars: Hopper Ore” (Ex. 1004, 27–28; Ex. 1054, 27–28) support Petitioner’s position that “Wong and the 1946 Cyclopedia are in the same field.” Pet. 52; see also id. at 76 (“Wong discloses a rail road hopper car (‘hopper railcar’ 10)”), 18–19 (“The ore-car section of the 1946 Cyclopedia—entitled ‘Freight Cars: Hopper Ore’— contains drawings and a photograph of an ore car manufactured by Patent Owner NSC.”); Ex. 1003 ¶ 56 (“Wong and the 1946 Cyclopedia are in the same field of hopper railcars”) (citing Ex. 1004, 27–28; Ex. 1006, code [57]). This position is not persuasively rebutted by Patent Owner’s argument that Wong’s hopper railcar 10 uses aluminum and steel together for certain reasons. Prelim. Resp. 28–29.” slip op. at 23
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,166,892 - PTAB · Dec 16, 2025 · IPR2025-01047 · APJ Hyun J Jung · IPR · Institution
The Board instituted IPR of claims 1–44 on all presented challenges, finding a reasonable likelihood that FreightCar would prevail on at least one claim based on Hart, the 1906 Cyclopedia, and Wong.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and for the reasons explained below, we determine that Petitioner has shown a reasonable likelihood of prevailing with respect to at least one of the challenged claims. Thus, we institute an inter partes review of claims 1–44 of the ’515 patent on all presented challenges. 37 C.F.R. § 42.108(a) (2024) (“When instituting . . . review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”); see also SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Pet. 29; Prelim. Resp. 9. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 9. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted. Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“to further support the upper, outboard end of the slope sheet with a crosswise, L-shaped beam as in Wong,” and one of ordinary skill in the art would have been motivated to do so, because of “the benefits of reinforcing the slope sheet at its upper end, where its connection with another structure creates a stress concentration.” Pet. 63 (citing Ex. 1003 ¶ 108). Petitioner points to Hart’s transverse beam b3 and argues that it suggests using a transverse beam like Wong if Hart is modified so that upper beam b3 no longer supports the slope sheet. Id. (citing Ex. 1008, Fig. 1). Petitioner also argues that the references are in the same field and that there would have been a reasonable expectation of success. Id. at 63–64 (citing Ex. 1003 ¶ 108; Ex. 1008, Fig. 1). Based on the preliminary record, Petitioner shows that its proposed combination of Hart, the 1906 Cyclopedia, and Wong teaches or suggests the above-quoted limitations of claim 24 and that one of ordinary skill in the art would have combined those references in the manner asserted with a reasonable expectation of success.” slip op. at 19
§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,132,515 - PTAB · Dec 16, 2025 · IPR2025-01073 · APJ Robert L Kinder · IPR · Institution
The Board instituted IPR of claims 1–5, 7–12, 14–18, and 20 on all petitioned grounds, finding a reasonable likelihood that Kido anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. at 2. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1005, 5:13–17. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’024 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “first payout . . . wherein the first payout is higher.” See Pet. 33–35. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a first payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a second payout that does not receive the Prog bonus. Pet. 35. Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129. Patent Owner next contends that Kido does not disclose a first payout that is “for the spin of the roulette wheel.” Prelim. Resp. 29. Patent Owner’s argument is premised on the cumulative nature of Kido’s Prog bonus – it builds with every spin of the roulette wheel until won. Id. (“Each time the wheel is spun, 0.5% of the amount wagered is added to the progressive jackpot, and thus, the jackpot’s value reflects multiple spins of the roulette wheel.”). Thus, according to Patent Owner, the value of the jackpot is determined using multiple spins of the roulette wheel and is not “for a spin of the roulette wheel” as claimed.” Id. at 30. The claims, however, only require a first payout that is higher than a second payout. Nothing prohibits the higher payout from accumulating from prior spins of the roulette wheel because, when it is actually won, it will be for that last spin of the roulette wheel. Ex. 1005, 8:35–36 (“indicating that the first player is to be paid at the first payout for the spin of the roulette wheel”). Regardless of how Kido’s Prog bonus accumulated, it is paid for a spin of the roulette wheel – at that juncture Kido discloses each claim element. Anticipation occurs when a prior art reference discloses every element of a patent claim at a point in time, as Kido does with a single spin of the roulette wheel that pays the Prog bonus. As persuasively explained by Petitioner, “the steps of Figure 12 (including A13) occur within a single round of roulette, for a single spin of the roulette wheel, until the routine ‘returns to the step of A1 and is transited to a next game.’” Pet. 39 (quoting Ex. 1007 ¶ 233).” slip op. at 13
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,629,024 - Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - PTAB · Dec 8, 2025 · IPR2025-01064 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–18 on all four §103 grounds, finding a reasonable likelihood that Volkswagen would prevail on at least claim 1 over Weese.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A. Legal Standards — Petitioner’s Burden “In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the 1 Amendments to 35 U.S.C. § 103 enacted by the Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”) took effect in March 2013. The ’353 patent issued from an application filed in September 2004. See Ex. 1001, code (22). Thus, we apply the pre-AIA version of § 103. grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). B. Legal Standards — Obviousness A patent claim is unpatentable under 35 U.S.C. § 103(a) if the differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of nonobviousness, if made available in the record, which has not happened here. See Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966).” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“C. Level of Ordinary Skill in the Art Petitioner contends a person having ordinary skill in the art pertaining to the ’353 patent “would have possessed at least a four-year degree in physics, biophysics, medical physics, or a related field, and two years of experience in developing and/or applying computed tomography methods,” wherein “[a]dditional education and professional experience are interchangeable.” Pet. 1; Ex. 1003 ¶¶ 54–55. “Patent Owner utilizes Petitioner’s proposed level of skill in the art.” Prelim. Resp. 2. For purposes of this Decision, we adopt Petitioner’s formulation of ordinary skill in the art, as it appears to be consistent with the ’353 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Expert testimonyOther
“unpatentable as having been obvious over Weese, including supporting testimony from Dr. Peterson. See Pet. 17–22, 26–83; Ex. 1003 ¶¶ 138–149, 159–257. Patent Owner opposes. See Prelim. Resp. 1–2, 6–7. We conclude Petitioner has demonstrated a reasonable likelihood of prevailing on its assertions, as follows.” slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“(iii) Analysis Based on the present record, we determine Petitioner’s contentions regarding the third step of claim 1 are supported sufficiently by the cited disclosures in Weese and Dr. Peterson’s testimony to justify institution of review. In particular, Weese describes obtaining a plurality of second images of the patient’s internal organs (i.e., PET image I0 in Fig. 1, and PET image I10 in Fig. 3) using a second imaging technique (i.e., PET). See Ex. 1005, Figs. 1, 3, and 6, ¶¶ 47–49, 58–59, 72. In particular, PET image I0 in Figure 1 may be a reconstructed “volume image[]” composed of a plurality of “quasi two-dimensional” “slice images” that, when combined, represent a three-dimensional region inside the patient. Id. ¶¶ 48, 58, 61; see also Pet. 56–57. PET image I10 in Figure 3 may be a similarly reconstructed volume image composed of a plurality of slice images.4 See 4 We do not rely here on Petitioner’s alternative theory that Weese discloses a “plurality” of second images because PET images I0 and I10 are “superposed” images encompassing “several states of motion.” Pet. 58. Ex. 1005 ¶¶ 61, 83–84. Patent Owner’s sole opposition to Petitioner’s assertions in this regard are limited to whether Weese “obtain[s]” PET images I0 and I10 as recited in claim 1, which we address below. Also, it appears that PET images I0 and I10 are obtained while also obtaining second movement measurements of the patient’s internal organs using a second sensor system (i.e., motion acquisition unit 12 and motion sensor 15 / S1) which is independent from the PET imaging technique. See Ex. 1005, Figs. 1 and 6, ¶ 65 (“[T]he respiratory motion is determined during the acquisition of the PET projections P1 by means of a respiratory motion sensor provided on the patient and therefrom the frequency function f(r) or, more generally, a state of motion function F1 is derived for the construction of the motion model M2.”). Furthermore, Weese describes how frequency function f(r) is utilized to facilitate image comparison between CT and PET images at common motion states. See id. ¶¶ 31, 49–51, 70–71, 75–77, 79–80, 83; see also Ex. 1003 ¶¶ 214–216 (Dr. Peterson’s supporting testimony). Patent Owner’s sole opposition to Petitioner’s assertions in this regard are limited to whether Weese “obtain[s]” PET images I0 and I10 as recited in claim 1, which we address below. Patent Owner’s two opposing arguments are unavailing, based on the present preliminary record. First, Petitioner relies on reconstructed PET images I0 and I10 as satisfying the “plurality of second images” recited in claim 1, not PET projections P1 from which PET images I0 and I10 are derived. See, e.g., Pet. 56, 58 (“I0 and I10 disclose and render obvious a ‘plurality of second images’ in two ways” — “I0 and I10 may be ‘volume images’ formed using ‘known’ techniques,” and “I0 and I10 are ‘superposed’ PET images encompassing ‘several states of motion,’ which” slip op. at 18
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,265,353 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.All claims unpatentablePTAB · Dec 2, 2025 · IPR2024-00928 · APJ Neil T Powell · IPR · Final written decision
Claims 1–5, 11–13, and 16–18 are unpatentable as obvious over Schröder and Yuen, LeBoeuf, or LeBoeuf and Wissmar; Schröder alone did not render its challenged claims unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 14. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’034 patent and the references cited in the Petition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner has the better position, as we agree with Petitioner that the ’034 patent discloses an embodiment that uses transparent potting as a window, rather than to form the overall form factor and encapsulate components: [Figure] 16C is a perspective view of the WCD with potting material 1630. As described above, the PCB, battery, and components can be disposed within the space. Once disposed therein, a potting 1630 can be provided atop the components and within the cutaway portion 1616. The potting 1630 can be transparent to allow for transmission of light through the cutaway portions 1616. Ex. 1001, 20:51–57. This configuration is shown below in Figure 16C. “[Figure] 16C is a perspective view of the WCD with potting material.” Ex. 1001, 6:1–2. As Figure 16C shows, potting material 1616 forms a window in only a portion of the WCD’s exterior. can be used to encapsulate components and form the overall form factor in some embodiments. E.g., Ex. 1001, 17:4–8, 18:61–62. But Patent Owner does not persuade us that claim 12 is limited to those embodiments. PO Resp. 29; SuperGuide Corp. v. DirecTV Enters., Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not part of the claim.”). Accordingly, we do not construe claim 12’s “external transparent potting” as requiring material that “forms the ‘overall form factor of the WCD 120, in addition to providing a housing for one or more electronic components,’” as suggested by Patent Owner. PO Resp. 29. Nor do we construe the claim language as requiring material that “also fills the space and encapsulates the components,” as suggested by Patent Owner. Id.” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position. Although Schröder describes some aspects that are similar to those of a printed circuit board, Petitioner has not sufficiently demonstrated that a person having ordinary skill in the art would understand Schröder’s inlay 12 or carrier foil to be a “printed circuit board,” as recited in independent claims 1, 11, and 16. As an initial matter, while Schröder refers to a “circuit board” in another context, it never refers to the carrier foil or inlay in its finger-ring embodiment as such. See Ex. 1007, 22:48–49; see also Ex. 1079 ¶ 21 (Dr. Anthony acknowledging that Schröder’s only reference to a “circuit board” is “unrelated to Schröder’s finger-ring teachings”). Instead, Schröder describes features of that inlay, explaining that “[t]he carrier foil itself consists of a flexible plastic material, e.g.[,] PET or Kapton” and “antenna coil 8 can for example be printed on the carrier foil by means of a conductive paste” and “a depression is manufactured in the carrier foil, e.g.[,] by milling, lasering, etching, before the chip module 10, the antenna coil 8 and optional further electronic devices are inserted into the depression.” Ex. 1007, 13:26–31, 13:35–37. Schröder further describes that “[a]t least one further foil can be applied to the carrier foil or the ring blank on at least one side” to produce a “multilayer foil composite” that can be “interconnected” by means of “glue” slip op. at 23
- Expert testimonyPetitioner expert discountedOther
“show that Schröder’s inlay 12 is a PCB. Relying on testimony from Dr. Anthony, Petitioner asserts that Schröder’s inlay 12 serves as a flexible carrier made of materials “commonly understood to be printed circuit board materials” such as PET and Kapton. Pet. 23 (citing Ex. 1002 ¶ 172; Ex. 1006, 12:28–29). Dr. Anthony did not provide a clear explanation of a person of ordinary skill in the art’s understanding of a PCB in his direct testimony. article describing a PCB as a “laminated sandwich structure of conductive and insulating layers” was an accurate description of a PCB: Q. So is the first sentence of this Wiki page, in your mind, an accurate description of a printed circuit board? A. So, the first sentence, “A printed circuit board (PCB)[] also called [a] printed wiring board, []is a laminated sandwich structure of conductive and insulating layers, each with a pattern of traces, planes, and other features (similar to wires on a flat surface) etched from one or more sheets of copper laminated onto or between sheet layers of nonconductive substrate.” And so your question again was? Q. Is that a fair definition of printed circuit board in your mind? A. It’s a fair description of the general process for circuit boards, layers of conductive traces.” slip op. at 21
Patent outcomesUS 9,582,034 unpatentableClaim construction§ 103 obviousnessPatents in suitUS 9,582,034 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.Some claims unpatentablePTAB · Nov 25, 2025 · PGR2024-00030 · APJ Linda E Horner · PGR · Final written decision
Claims 17 and 18 are unpatentable under §112(d) for improper dependent form; claims 1–10 and 12–16 were not shown unpatentable on the asserted obviousness grounds.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“We do not credit Dr. Anthony’s testimony, which is based on the arbitrary shading in Figure 7 (see Ex. 1002 ¶ 174), that Schröder teaches or suggests limitation 1[d] because it (1) is inconsistent with Petitioner’s reasoning for limitation 1[c], and (2) it is based on an admitted misreading of the embodiment of Schröder’s Figure 5 (see Ex. 1002 ¶ 175). As to the first item, Dr. Anthony states that “a POSITA would have been motivated to place a battery in a part of the cavity that is far from a PCB holding other electrical components because that configuration allows for better thermal management.” Ex. 1002, para. 175. The problem with this statement is that Petitioner relies on Schröder’s teaching that inlay 12, i.e., the alleged PCB, could include “other electrical components,” such as a battery to support its position that Schröder suggests placing a battery between the ring halves. See, e.g., Pet. Reply 2 (pointing to Dr. Mercier’s depo testimony that inlay 12 with “other components” is inserted between ring halves); id. at 3 (relying on Schröder’s teaching about placing components in depressions on inlay 12). So, Petitioner earlier asserts for the battery limitation 1[c] that Schröder teaches or suggests putting a battery on inlay 12 inside the ring halves, but then for limitation 1[d], Dr. Anthony testifies that a POSITA would place the battery “far” away from the inlay 12 (i.e., the alleged PCB). These positions are inconsistent.” slip op. at 25
- Skill levelSkill level board ownOther
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶¶ 18–22). Petitioner also contends that a person of ordinary skill would have been “familiar with, for example, sensor system design and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 26. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’178 patent and the references cited in the Petition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner indicates that in the related ITC proceeding involving the ’178 patent, the Administrative Law Judge (ALJ) adopted three constructions agreed-upon by the parties in that proceeding8 and also construed two disputed terms.9 Resp. 26–27 (citing Ex. 2016, 5, 6, 14). Patent Owner agrees with Petitioner, however, that no terms need to be construed to decide the issues raised in the Petition. Id. at 27. We reviewed the constructions adopted by the ITC. Ex. 2016, 5, 6, 14. 8 In the ITC proceeding, the ALJ adopted the parties’ agreed-upon constructions that: (1) the preamble of claim 1 [a finger-worn wearable ring device] is limiting; (2) [positioned/configured to fit] within a “cavity” is [positioned/configured to fit] within a “hollow space”; and (3) [the internal housing component] “coupled with” [the external housing component] is [the internal housing component] “connected with” [the external housing component]. Ex. 2016, 5. 9 In the ITC proceeding, the ALJ construed the claims such that: (1) the internal and external housing components of claims 1, 12, and 17 enclose space and do not necessarily exclude potting material; and (2) “circumferential,” as recited in claims 1, 17, and 18, does not require a closed shape. Ex. 2016, 14, 17. These constructions are not germane to the issues we need to decide to resolve this proceeding. Thus, we agree that no explicit claim construction is necessary for this decision. To the extent the parties’ arguments raise any implicit issues of claim construction, we address those issues within the context in which they are raised in our analysis below.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“The record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “Mestas’s batteries, layout, and other components . . . would have to be scaled down 5 to 10 times to be appropriately sized for a finger worn ring.” Resp. 64 (internal quotation marks omitted) (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Moreover, we do not credit Dr. Anthony’s testimony that miniaturization of the battery would have been “trivial to implement.” Ex. 1002 ¶ 242. Dr. Anthony admitted on cross-examination that it would not have been within the level of skill of a person having ordinary skill in the art to design a smaller version of Mestas’s battery, and that such a person would need to procure a battery of the appropriate size and specifications for implementation in a finger-ring from a battery manufacturer. Ex. 2021, 315:9–318:9. Yet Dr. Anthony had not ascertained, for purposes of his testimony, whether there was a battery available in 2013 that was appropriate to fit within the inlay space of the modified version of Schröder’s finger-ring that he and Petitioner allege would have been obvious to one of skill in the art at that time. Id. at 321:5–10. Further, we credit Dr. Mercier’s testimony that Dr. Anthony’s testimony fails to consider the differences in power requirements between Mestas and Schröder or to account for the constraints of such a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶¶ 159–160. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’178 patent, we also have evidence that prior art “finger ring wearables up to the ’178 patent had used ‘coin’ type batteries.” Id. at 66 (citing Ex. 2018 ¶ 161). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would look to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 161. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 61–70. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring-type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 71. Based on these findings, Petitioner has not met its burden to show by a preponderance of the evidence that a person having ordinary skill in the art would have been led to modify Schröder’s finger-ring to place a curved battery between the internal and external housing components in light of the teachings in Mestas. Thus, Petitioner has not met its burden to show by a preponderance of the evidence that dependent claim 3 of the ’178 patent is unpatentable over Schröder and Mestas.” slip op. at 38
Patent outcomesUS 11,868,178 mixedClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,868,178 - Texas Instruments Incorprated v. Parkervision, Inc.All claims unpatentablePTAB · Nov 21, 2025 · IPR2024-00934 · APJ Michael R Zecher · IPR · Final written decision
Claims 19–21 are unpatentable as obvious over DeMaw and, separately, over Macnally.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“1. Principles of Law A claim is unpatentable under § 103(a) if the differences between the” slip op. at 16
Patent outcomesUS 7,496,342 unpatentable§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,496,342 - Google LLC v. Eyesmatch Ltd.Some claims unpatentablePTAB · Nov 21, 2025 · IPR2025-00296 · APJ Neil T Powell · IPR · Final written decision
Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“December 18, 2012, would have a bachelor’s degree in electrical or computer engineering, or a closely related field such as computer science, and two years of work experience with image capture and processing systems or related fields.” Pet. 7 (citing Karam Decl. ¶ 91). Petitioner adds that “[a] person with less and/or different education, but more relevant practical experience, or vice versa, may also meet this standard.” Id. According to Petitioner, [t]he prior art also evidences such level of skill.” Id. Patent Owner states that it “applies Petitioners’ proposed level of skill for purposes of this Response.” PO Resp. 9 (citing Forsyth Decl. ¶¶ 53–54). For this Decision, we adopt the formulation of the level of ordinary skill in the art proposed by Petitioner and applied by Patent Owner as consistent with the prior art before us in this proceeding.10” slip op. at 9
- Prior constructionPrior construction adoptedDecided for patent owner
“Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Post-institution, Patent Owner invites us to construe limitation 1[f]’s recitation of “mirror tracking mode” and limitation 1[c]’s recitation of “adaptive transformation mapping.” PO Resp. 9–14. Regarding the latter, Patent Owner explains that “[i]n the District Court Litigation, ‘adaptive transformation mapping’ was construed as ‘continuously variable transformation mapping’ and ‘transformation mapping’ was construed as a ‘selected set of image transformations.’” Id. at 14 (citing Ex. 2008, 14, 37; Ex. 2013 ¶¶ 25, 27). Patent Owner does not, however, identify any way that those claim constructions affect our analysis of the parties’ patentability disputes. We find it unnecessary in resolving the parties’ patentability disputes to construe expressly limitation 1[c]’s recitation of “adaptive transformation mapping.”” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4.” slip op. at 23
Patent outcomesUS 8,982,110 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 8,982,110 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. et al. v. Eyesmatch Ltd.All claims unpatentablePTAB · Nov 21, 2025 · IPR2024-00810 · APJ Neil T Powell · IPR · Final written decision
Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.
RulingsFinal written decision- Prior constructionPrior construction adoptedDecided for patent owner
“Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4. Thus, on the whole, Petitioner’s shifting, scattered arguments do not persuasively address limitation 1[f]. Accordingly, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Haan and Francois. And Petitioner’s arguments and evidence addressing claims 2–6, 10–12, 16, and 17 do not cure the foregoing deficiencies in the challenge of claim 1. Pet. 46–52. Accordingly, Petitioner has not shown by a preponderance of the evidence that any of claims 1–6, 10–12, 16, and 17 would have been obvious over Haan and Francois.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We do not agree. Petitioner demonstrates persuasively that a person of ordinary skill would have combined these references “to correct image distortions and provide a more realistic mirror image.” Pet. 52–55; Ex. 1003 ¶¶ 242–249. We are not persuaded by Patent Owner that by specifically disclosing “flipping” the image, Rosenberg is discouraging or teaching away from performing other transformations to achieve its objective of “replicat[ing] the performance of a standard household mirror.” See PO Resp. 35, 38–39 (Patent Owner asserting lack of motivation to combine the references). A reference may be said to “teach away” “when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” Galderma Lab'ys, L.P. v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013) (quoting DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed.Cir.2009)). “A reference does not teach away, however, if it merely expresses a general preference for an alternative invention but does not criticize, discredit, or otherwise discourage investigation into the invention claimed.” Id. Further, when conducting an obviousness analysis, the Board must consider a prior art reference “not only for what it expressly teaches, but also for what it fairly suggests.” Bradium Techs. LLC v. Iancu, 923 F.3d 1032, 1049 (Fed. Cir. 2019) (quoting In re Baird, 16 F.3d 380, 383 (Fed. Cir. 1994)). We are not convinced that the references before us “teach away” from performing the other transformations. In sum, we find for the reasons given that Petitioner has demonstrated by a preponderance of evidence that to a person of ordinary skill, Rosenberg alone or with Park teaches or suggests limitation 1[f].” slip op. at 44
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“shows by a preponderance of the evidence that limitations 1[c] and 1[e] are taught or suggested by Rosenberg and Park, in combination. Pet. 58–64; PO Resp. 39–40; Reply 19–20; Sur-reply 19. Petitioner persuades us that limitations 1[c] and 1[e], would have been obvious over Rosenberg and Park, in combination. Pet. 58–64; Reply 19–20. Patent Owner’s counter arguments are unavailing for multiple reasons. Patent Owner’s arguments fail because they improperly attack Rosenberg’s teachings individually, rather than addressing Petitioner’s combination of the references. PO Resp. 39–40; Sur-reply 19. This is fatal to Patent Owner’s arguments. In re Merck & Co., 800 F.2d 1091, 1097 (Fed. Cir. 1986). Moreover, Petitioner presents persuasive arguments and evidence that the references, in combination, teach limitations 1[c] and 1[e], including persuasive evidence that the references’ tilting, resizing, and zooming meet the claim limitations’ “adaptive transformation mapping . . . to generate modified images that appear to be captured from a different point of view” that “corresponds to an image taken from a different angle and a different distance.” Pet. 58–64 (citing Ex. 1001, 3:26–28; Ex. 1003 ¶¶ 65–67, 253–268; Ex. 1006 ¶¶ 26–28, 50, 52, 61, 75 ; Ex. 1011 ¶¶ 50–51, 59, Figs. 6A–6B, 7, 8, 14, 15; Ex. 1019, 16–20; Ex. 1021, 2:19–27, 17:19–24, 21:60, 23:65–24:9, 25:46–48, 30:4–11, Fig. 11); Reply 19–20 (citing Ex. 1003 ¶¶ 253–268; Ex. 1021, 17:17–23; Ex. 2012, 63:13–22, 111:13–21). Regarding tilting, after noting the ’110 patent’s disclosure (incorporated from the ’109 patent) of performing tilt transformations (Pet. 10–11), Petitioner advances persuasive evidence that Park discloses such a tilting transformation, thereby teaching the claimed “different angle” (id. at 61–63). Regarding resizing and zooming, citing extensive discussion in the ’110 patent (incorporated from the ’109 patent) of resizing and/or zooming to address the effects of varying distance between an object and a camera, Petitioner and Dr. Karam explain that the prior art’s zooming and resizing meet the claimed “different distance.” Pet. 63 (Ex. 1001, 3:26–28; Ex. 1021, 17:19–23, 21:57–60, 23:65–24:9, 25:46–48, 30:4–11, Fig. 11); Ex. 1003 ¶ 265 (citing Ex. 1001, 3:26–28; Ex. 1021, 17:19–23, 21:57–60, 23:65–24:9, 25:46–48, 30:4–11, Fig. 11). In its counterarguments, Patent Owner suggests that zooming and resizing do not account for “occlusion effects,” but Patent Owner does not persuasively tie this argument to the ’110 patent, failing to cite any portion of the ’110 patent that evinces its invention addresses such effects. PO Resp. 23–25, 39–40.” slip op. at 39
Patent outcomesUS 8,982,110 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 8,982,110
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.