- Billerud Aktiebolag (Publ) v. Westrock MWV, LLCSome claims unpatentablePTAB · Mar 12, 2025 · IPR2023-01206 · APJ Elizabeth M Roesel · IPR · Final written decision
Claims 1, 2, and 4–22 are unpatentable as obvious; claim 23 was not shown unpatentable. Substitute claims 25–26 are allowed, while 24 and 27 are denied for lack of written-description support.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedOther
“Exhibits 1013 and 1014 are also not admissible as expert testimony because Mr. Wirén is not “qualified as an expert by knowledge, skill, experience, training, or education.” Fed. R. Evid. 703. “To offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). Mr. Wirén does not meet our definition of a person of ordinary skill in the art. See Section II.B, supra. That definition is based on the undisputed testimony of Messrs. Zotterman and Klass. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. Although Mr. Wirén has a Master’s of Science in chemical engineering, he lacks any experience or specialization in paperboard manufacturing. Ex. 2011, 12:1–10, 19:6–25, 20:2–7. We therefore agree with Patent Owner that Exhibits 1013 and 1014 are the testimony of Mr. Wirén and should be excluded from evidence because Mr. Wirén is not a person of ordinary skill in the relevant art. PO MTE 5–6, 9; Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362 (Fed. Cir. 2008) (“Unless a patent lawyer is also a qualified technical” slip op. at 61
- Skill levelSkill level board ownOther
“Level of Ordinary Skill in the Art Based on the testimony of the parties’ witnesses, we determine that a person of ordinary skill in the art would have had a bachelor’s degree in paper science and engineering, chemical engineering, process engineering, mechanical engineering, or a related degree, with three to five years of experience in paperboard manufacturing, or a master’s degree in paper science and engineering, chemical engineering, process engineering, or mechanical engineering, or a similar field with a specialization in paperboard manufacturing. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’142 Patent Specification and the asserted prior art references.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDecided for petitioner
“A claim construction that excludes a particular element is viewed as a “negative limitation.” Ethicon LLC v. Intuitive Surgical, Inc., 847 Fed. App’x 901, 907 (Fed. Cir. Mar. 15, 2021). “[S]uch exclusions must find support either in ‘the words of the claim’ or through an ‘express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.’” Id. (citing Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002)). “The standards for finding lexicography and disavowal are exacting.” GE Lighting Sols., LLC v. AgiLight, Inc., 750 F.3d 1304, 1309 (Fed. Cir. 2014). “To act as its own lexicographer, a patentee must ‘clearly set forth a definition of the disputed claim term,’ and ‘clearly express an intent to define the term.’” Id. (citing Thorner, 669 F.3d at 1365). Similarly, disclaimer or disavowal requires that the specification or prosecution history demonstrate that the invention does not include a particular feature. Id. Here, we find no claim language, lexicography, or disclaimer in the ’142 Patent or its file history that would support defining a “hot-hard calender” as requiring that only one of the two rollers be heated to an elevated temperature.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“a contact surface of said thermo-roller is heated to an elevated temperature of at least 250°F.” Petitioner shows persuasively that the temperature limitation is taught by the combination of Fugitt and Papermaking. Pet. 32–34. Fugitt discloses that “[t]he rolls of the calender may be steam heated.” Ex. 1004 ¶ 26. In a section titled “Heated Rolls,” Papermaking discloses that “Steam can be used up to 170°C [338°F] surface temperature.” Ex. 1010, 95, 98. Petitioner is thus correct that, “[w]hile Fugitt teaches that a hot calender may be steam heated, Papermaking clarifies that one of ordinary skill in the art would understand that steam heated thermo-rollers may reach up to 338°F.” Pet. 36. Based on these disclosures, we are persuaded by Mr. Zotterman’s testimony that it would have been “obvious to heat the thermo-roller of Fugitt to at least 250°F.” Ex. 1003 ¶ 159. combine Fugitt and Papermaking because of Papermaking’s status as a “trusted handbook[],” because both references disclose a method of manufacturing a paperboard structure with hot calendering,” and “because of the known advantages of heated rollers.” Pet. 36–37; Ex. 1003 ¶¶ 157, 159, 162. Petitioner’s contention is supported by Papermaking’s disclosures that, for cartonboard, “[p]recalendering is used before the coater to reduce roughness and porosity” and “[h]igh thermo roll temperatures (in some cases over 200°C) result in bulk savings because of the temperature gradient.” Ex. 1005, 80–82; see also Pet. 38; Ex. 1003 ¶ 164 (citing these disclosures). Papermaking’s disclosed range of “up to 170°C [338°F]” for steam- heated rolls (Ex. 1010, 98), overlaps the claimed range of “at least 250°F.” Patent Owner agrees. Tr. 27:11–13. “If the relevant comparison between a disputed claim limitation and the prior art pertains to a range of overlapping values, ‘. . . even a slight overlap in range establishes a prima facie case of obviousness.’” Genentech, Inc. v. Hospira, Inc., 946 F.3d 1333, 1341 (Fed. Cir. 2020) (citing In re Peterson, 315 F.3d 1325, 1329 (Fed. Cir. 2003)). “[S]uch an overlap creates a presumption of obviousness, and . . . the burden of production falls upon the patentee to come forward with pertinent evidence that the overlapping range would not have been obvious in light of the prior art.” Id. (citing E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1006, 1008 (Fed. Cir. 2018)). slip op. at 21
Patent outcomesUS 11,293,142 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,293,142 - PTAB · Feb 27, 2025 · IPR2024-01228 · APJ Kimberly Mcgraw · IPR · Institution
The Board instituted IPR on all challenged claims and all asserted grounds after finding a reasonable likelihood that claim 1 is unpatentable over Fukui.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“c) Conclusion Petitioner shows a reasonable likelihood that it would prevail in showing that claim 1 is unpatentable over Fukui. Accordingly, we institute inter partes review of all challenged calms based on all grounds asserted in the Petition. See SAS, 138 S.Ct. at 1354.” slip op. at 25
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“III. DISCRETION TO DENY INSTITUTION UNDER 35 U.S.C. § 325(d) Patent Owner argues that if the Board determines that Petitioner’s Fukui-based grounds 1 and 2 are deficient, then the Board should deny institution under § 325(d). Prelim. Resp. 26. In particular, Patent Owner asserts that remaining grounds 3 through 5 rely on art (i.e., Sauter) a reference that is substantially similar to art that was before the Examiner (i.e., Sedor). Id. at 26–27. Because we do not determine that Fukui-based grounds are deficient, we decline to exercise our discretion to deny institution under § 325(d).” slip op. at 31
- Skill levelSkill level petitioner adoptedDecided for petitioner
“time it was made, we consider the level of ordinary skill in the pertinent art at the time of the invention. Graham, 383 U.S. at 17. Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems.” Pet. 26. (citing Ex. 1003 ¶¶ 19–21). At this stage of the proceeding, Patent Owner neither responds to Petitioner’s proposed definition, nor provides a definition of its own. See Prelim. Resp. Petitioner’s undisputed proposed definition appears to be consistent with the cited prior art and the disclosure of the ’422 patent, and we adopt it for purposes of this Decision.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed petitioner constructionDecided for petitioner
“Based on the present record, we agree with Petitioner that Patent Owner’s statements during prosecution are relevant to claim construction. Pet. 24–25. During prosecution of the parent application to the ’422 patent, Patent Owner stated, inter alia, that “a person of ordinary skill in the art would understand that the width of a cassette is simply the width of the cassettes from side to side and not some other ‘dimension’ such as the number of receptables or the like.” Ex. 1002, 187. Patent Owner further stated that it disagreed with the Examiner’s statement that paragraph 15 of the specification6 defines width in terms of the number of receptacles and that such a definition of width makes no sense in view of other claims where the standard with is defined in terms of a width of front edge of a tray on which the cassettes are secured. Id. We note that at this stage of the proceeding, Patent Owner has not provided any argument or evidence opposing Petitioner’s proposed construction or supporting the claim construction that it proposed during the district litigation. Our construction is preliminary and the parties are invited to address this claim construction more fully during trial.” slip op. at 13
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,656,422 - PTAB · Feb 27, 2025 · IPR2024-01382 · APJ Josiah C Cocks · IPR · Institution
The Board instituted IPR on claims 1–30 and all petition grounds, finding a reasonable likelihood of success based on Fukui’s teachings.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (POSITA) would have a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems. Pet. 24 (citing Ex. 1003 ¶¶ 19–21). Patent Owner does not dispute Petitioner’s assessment of the level of ordinary skill in the art, or offer its own assessment. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’423 patent and the asserted prior art, and we apply it in our patentability evaluations below. See also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“In this proceeding, Patent Owner does not dispute any of Petitioner’s contentions as to claim construction or offer any construction of its own for any term. We are mindful of Petitioner’s view that Patent Owner’s litigation construction is inconsistent with the plain language of the claims. We also question whether that construction adds clarity in seemingly substituting “width that accommodates” for “width,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute or necessitate that we adopt any particular construction for any claim term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this time, we find persuasive Petitioner’s position that Fukui’s teachings account for the pertinent “width” requirements of each of claims 1, 9, and 17. See, e.g., Pet. 30, 32–46. On this record, Dr. Ralph provides sufficient testimony that under either of the parties’ proposed constructions of the limitations involving cassette widths, Fukui’s teachings account for those limitations. See, e.g., Ex. 1003 ¶¶ 71–98.” slip op. at 24
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“Owner’s challenge to Petitioner’s Fukui-based grounds is whether, in Fukui, a conversion module (e.g., 20) that is formed by coupling together two unit modules establishes that conversion module as a new structure identifiable as a unitary cassette.11 We discern that Fukui uses the term “conversion module” to refer to component 10, and uses that same term, i.e., “conversion module” to refer to component 20. See, e.g., Ex. 1004, 6:33–35, 7:23–25. The components 10A and 10B that make-up conversion module 20 are characterized as each being a “unit module.” See, e.g., id. at 7:25–27. Thus, once unit modules 10A and10B are coupled together to form the structure that is “conversion module 20,” the current record reasonably suggests that the conversion module 20 is a component analogous to conversion module 10, but with a larger width, i.e., two times the width. Further, Fukui also characterizes unit modules 10A and 10B as being “fixed” to one another via coupling member 21 (see, e.g., id. at 10:11–16) forming “one body” (see, e.g., id. at 8:2–3). Further still, as described and shown in Fukui (e.g., Figure 5), conversion module 20 is structured to operate via a singular multicore optical connector 16 from which optical fibers F1 extend to all of the single-core optical connectors 17 of the conversion module. Id. at 7:52– 11 There is no dispute on this record that the term “module” as used in Fukui is analogous to the term “cassette” as used in the ’423 patent. 8:6. Thus, conversion module 20 is recognizable has having a singular system of fiber optic components within its body.” slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,740,423 - PTAB · Feb 27, 2025 · IPR2024-01227 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on all grounds for claims 1–5 and 8–13, finding a reasonable likelihood that claim 8 is anticipated by Fukui and claims 1 and 8 are obvious over Fukui-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“Patent Owner contends that we should deny institution under 35 U.S.C. § 325(d) “because the Petition presents ‘the same or substantially the same prior art or arguments previously . . . presented to the Office.’” Prelim. Resp. 25–31 (alteration in original). Specifically, Patent Owner explains, the Office previously considered Sedor during the ’542 patent’s prosecution, and Sauter was made of record but not considered during prosecution. Id. Patent Owner, however, states that it “recognizes that this argument only reaches Sauter-based grounds, not Fukui-based grounds. This argument thus only needs to be addressed after the Board confirms the fundamental deficiencies in Petitioner’s Fukui-based grounds.” Id. at 25 n.3. Because, as set forth below, we do not, on the present record, find any “fundamental deficiencies in Petitioner’s Fukui-based grounds” that inhibit institution of trial, we regard Patent Owner’s § 325 request as moot, and we need not consider it further.” slip op. at 10
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have [had] a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems.” Pet. 26. On the present record, Patent Owner does not dispute this proposed level of skill. Prelim. Resp. 1–31. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’542 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“enough to resolve . . . the lead Fukui ground” but that “[t]here are two disputes relevant to the alternative Sauter ground.” Pet. 22. With respect to the first of these “disputes,” Petitioner presents two claim constructions for the claim term or phrase “cassette width as measured between outer side edges thereof of one of one, two, three, four and six standard width units.” Id. at 23. The constructions are said to be from “the co-pending litigation,” with one characterized as “Patent Owner’s proposed construction”6 and the other as “CommScope’s proposed construction.”7 Of note is Petitioner’s 6 The claim construction attributed to Patent Owner is: “cassette width as measured between the outer side edges thereof that accommodates one of one, two, three, four, or six receptable modules.” Pet. 23. 7 Petitioner’s construction is: “The cassette width as measured between the outer side edges thereof equals one, two, three, four, or six times the contention that “[Patent Owner]’s construction cannot be correct,” and accompanying explanation in that respect. Id. at 22–23, 24. Patent Owner acknowledges that there is a dispute between the parties as to the noted claim construction but urges that “[t]he Board, however, need not fully resolve this claim construction dispute,” as, in Patent Owner’s view, the grounds based on Sauter are deficient based on either construction. Prelim. Resp. 21–22. We are mindful of Petitioner’s view that Patent Owner’s litigation construction is not correct. We also question whether that construction adds clarity in substituting “width that accommodates” for “width of,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute, nor does it necessitate that we adopt any particular construction for the pertinent claim term. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We invite the parties to develop the record more fully on this claim- construction issue during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,435,542 - PTAB · Feb 27, 2025 · IPR2024-01218 · APJ Josiah C Cocks · IPR · Institution
The Board instituted IPR of claims 1–5 and 8–13 on all petitioned grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a).” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“Stated somewhat generally, the core question underlying Patent Owner’s challenge to Petitioner’s Fukui-based grounds is whether a conversion module (e.g., 20) that is formed by coupling together two unit modules establishes that conversion module as a new structure identifiable as a unitary cassette. We discern that Fukui uses the term “conversion module” to refer to component 10, and uses that same term, i.e., “conversion module” to refer to component 20. See, e.g., Ex. 1004, 6:33–35, 7:23–25. The components 10A and 10B that make-up conversion module 20 are characterized as each being a “unit module.” See, e.g., id. at 7:25–27. Thus, once unit modules 10A and 10B are coupled together to form the structure that is “conversion module 20,” the current record reasonably suggests that the conversion module 20 is a component analogous to conversion module 10, but with a larger width, i.e., two times the width. Further, Fukui also characterizes unit modules 10A and 10B as being “fixed” to one another via coupling member 21 (see, e.g., id. at 10:11–16) and forming “one body” (see, e.g., id. at 8:2–3). Further still, as described and shown in Fukui (e.g., Figure 5), conversion module 20 is structured to operate via a singular multicore optical connector 16 from which optical fibers F1 extend to all of the single-core optical connectors 17 of the conversion module. Id. at 7:52– 8:6. Thus, conversion module 20 is recognizable has having a singular system of fiber optic components within its body. At this time, we regard such characterization of the coupled unit modules 10A and 10B as reasonably giving rise to an understanding that the resulting conversion module 20 constitutes a unitary module or cassette component.” slip op. at 20
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“IV. REQUEST FOR DENIAL UNDER 35 U.S.C. § 325 Patent Owner contends that the Board should exercise its discretion to deny under 35 U.S.C. § 325(d) on the theory that the Petitioner relies on substantially the same prior art and arguments that were previously considered by the Office. See Prelim. Resp. 31–37. Patent Owner, however, states the following: “Patent Owner recognizes that this argument only reaches Sauter-based grounds, not Fukui-based grounds. This argument thus only needs to be addressed after the Board confirms the fundamental deficiencies in Petitioner’s Fukui-based grounds.” Id. at 31, n.4. Because, as set forth above, we do not agree at this time as to any “fundamental deficiencies in Petitioner’s Fukui-based grounds” that inhibit institution of trial, we regard Patent Owner’s § 325 request as moot, and need not consider it further.” slip op. at 23
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“We are mindful of Petitioner’s view that Patent Owner’s litigation construction is not correct. We also question whether that construction adds clarity in substituting “width that accommodates” for “width of,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute or necessitate that we adopt any particular construction for any claim term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). 9 The claim construction attributed to Patent Owner is: “cassette width that accommodates one of one, two, three, four, or six receptable modules.” Pet. 21. 10 Petitioner’s construction is: “The cassette width equals one, two, three, four, or six times the standard width unit, without an additional amount. This means the cassette width must be evenly divisible by the standard width unit.” Pet. 21.” slip op. at 12
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,795,107 - Menard, Inc. v. Signify Holdings B.V.InstitutedPTAB · Feb 14, 2025 · IPR2024-01469 · APJ Steven M Amundson · IPR · Institution
The Board instituted review of claims 1–20 on all petitioned challenges and granted Menard’s motion to join the Luminex IPR.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Here, Petitioner presents substantively identical challenges to claims 1–20 in the ’336 patent based on the same prior art, the same evidence, and the same unpatentability theories as Luminex presents in the Luminex IPR. Compare Pet. 15–89, with IPR2024-00101, Paper 1 (“Luminex Pet.”) at 15–89. According to Petitioner, the Petition differs from Luminex’s petition only because of different party names and updated sections concerning standing, related matters, real parties in interest, and counsel. Mot. 4. Because Petitioner presents substantively identical challenges to claims 1–20 in the ’336 patent based on the same prior art, the same evidence, and the same unpatentability theories as Luminex presents in the Luminex IPR, Petitioner satisfies the “reasonable likelihood” standard for instituting trial for the same reasons Luminex satisfied the “reasonable likelihood” standard for instituting trial. See Luminex Pet. 15–89; Luminex Inst. Dec. 19–64; Pet. 15–89.” slip op. at 14
- PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner
“Consistent with § 315(b) and § 315(c), the Board’s rules provide that “[a]ny request for joinder must be filed, as a motion under § 42.22, no later than one month after the institution date of any inter partes review for which joinder is requested.” 37 C.F.R. § 42.122(b). The Board’s rules also provide that § 42.101(b)’s one-year time bar “shall not apply when the petition is accompanied by a request for joinder.” Id. We instituted an inter partes review in the Luminex IPR on September 9, 2024. Luminex Inst. Dec. 1. On September 23, 2024, Petitioner filed the Petition and the Motion for Joinder. Pet. 91; Mot. 7. Under § 42.122(b), Petitioner timely filed the Petition and the Motion for Joinder. See 37 C.F.R. § 42.122(b).” slip op. at 15
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“If joined to the Luminex IPR, Petitioner agrees to take an “understudy” role and only “substantively participate” if Luminex is terminated from the Luminex IPR. Mot. 1, 5–6. Further Petitioner agrees that the following conditions will apply to it in its “understudy” role “so long as Luminex remains an active party”: (1) “all filings by [Petitioner] in the joined proceeding be consolidated with the filings of Luminex, unless a filing solely concerns issues that do not involve Luminex”; (2) Petitioner “shall not be permitted to raise any new grounds not instituted by the Board in the Luminex IPR, or introduce any argument not already introduced by Luminex”; and (3) “with regard to taking of testimony, [Petitioner] will abide by 37 C.F.R. § 42.53 or any agreement between the Patent Owner and Luminex.”” slip op. at 17
- PTAB / AIA Trials › §315(e) estoppelEstoppel appliesOther
“5. CONCLUSION For the reasons discussed above, we determine that it is appropriate under the circumstances here to join Petitioner as a party to the Luminex IPR. See §§ III.D.2–III.D.4. The estoppel provisions of 35 U.S.C. § 315(e) will apply to Petitioner.” slip op. at 18
NonePatents in suitUS 10,299,336 - PTAB · Jan 8, 2025 · IPR2024-00959 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–10 on all petitioned grounds after finding a reasonable likelihood that Google would prevail on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Pursuant to 35 U.S.C. § 314(a), institution of review requires the information in the record to demonstrate a reasonable likelihood that Petitioner would prevail with respect to at least one challenged claim. Applying that standard on behalf of the Director (37 C.F.R. § 42.4(a)), we institute an inter partes review to determine whether Petitioner demonstrates by a preponderance of the evidence that claims 1–10 are unpatentable, considering all grounds in the Petition.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Patent Owner’s position in this regard invites us to err “by looking at [Fisher] individually” and separately from Kuwata, because “[t]he question in an obviousness inquiry is whether it would have been obvious to a person of ordinary skill in the art to combine the relevant disclosures of the two references, not whether each individual reference discloses all of the necessary elements.” Palo Alto Networks, Inc. v. Centripetal Networks LLC, 122 F.4th 1378, 1385–86 (Fed. Cir. 2024) (quoting Game & Tech. Co. v. Wargaming Grp. Ltd., 942 F.3d 1343, 1352 (Fed. Cir. 2019)); In re Merck & Co., 800 F.2d 1091, 1097 (Fed. Cir. 1986) (nonobviousness is not established by attacking references individually when unpatentability is predicated upon a combination of prior art disclosures); see also KSR, 550 U.S. at 420–421 (stating “[a] person of ordinary skill is also a person of ordinary creativity, not an automaton,” and “in many cases a person of ordinary skill will be able to fit the teachings of multiple patents together like pieces of a puzzle”). Finally, as to motivation for combining Kuwata and Fisher to practice the invention of claim 1, Petitioner’s contentions and Dr. Stevenson’s testimony justify institution of review. In particular, Dr. Stevenson testifies that a person of ordinary skill in the art would have been motivated, in light of Fisher’s disclosures regarding updating of data files on a camera, to configure Kuwata’s camera to download updated image processing control data from a server via the Internet, in order to pair the camera with various printers including printers that were not yet on the market when the camera was manufactured. See Pet. 15–18, 22–26; Ex. 1003 ¶¶ 86–89, 102–108. Based on the present record, we conclude Kuwata does not teach away from this combination, as Patent Owner would have it. Kuwata merely discloses that the camera manufacturer (as opposed to individual users of the camera) is in the best position to optimize the output control information CI utilized by the camera to reduce differences between images displayed to the user by the camera and images that are outputted by particular printers. See Ex. 1005 ¶¶ 75, 77. This does not detract from the benefits of updating the output control information CI after the camera is manufactured, for example so that the camera can be paired with printers that were not yet on the market when the camera was manufactured. Indeed, Fisher recognizes that “a manufacturer may create various ancillary data files 418, and make the ancillary data files 418 available on a distributed computer network like the Internet for subsequent downloading and utilization by camera device 110.” Ex. 1006 ¶ 55. That teaching in Fisher dovetails with Kuwata’s disclosure concerning camera manufacturers optimizing their cameras with various different printers. For the foregoing reasons, we conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to combine Kuwata and Fisher to practice the invention of claim 1.” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner’s position in this regard invites us to err “by looking at [Fisher] individually” and separately from Kuwata, because “[t]he question in an obviousness inquiry is whether it would have been obvious to a person of ordinary skill in the art to combine the relevant disclosures of the two references, not whether each individual reference discloses all of the necessary elements.” Palo Alto Networks, Inc. v. Centripetal Networks LLC, 122 F.4th 1378, 1385–86 (Fed. Cir. 2024) (quoting Game & Tech. Co. v. Wargaming Grp. Ltd., 942 F.3d 1343, 1352 (Fed. Cir. 2019)); In re Merck & Co., 800 F.2d 1091, 1097 (Fed. Cir. 1986) (nonobviousness is not established by attacking references individually when unpatentability is predicated upon a combination of prior art disclosures); see also KSR, 550 U.S. at 420–421 (stating “[a] person of ordinary skill is also a person of ordinary creativity, not an automaton,” and “in many cases a person of ordinary skill will be able to fit the teachings of multiple patents together like pieces of a puzzle”).” slip op. at 24
- Skill levelSkill level petitioner adoptedDecided for petitioner
“D. Level of Ordinary Skill in the Art Petitioner contends a person having ordinary skill in the art pertaining to the ’082 patent “would have had at least a bachelor’s degree in electrical engineering, computer science, or related engineering disciplines, and two years of experience in digital image processing,” wherein “[r]elevant work experience can substitute for formal education and additional education could substitute for work experience.” Pet. 5; Ex. 1003 ¶ 60. “Patent Owner does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 11–12. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’082 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,428,082 - Google LLC v. 138 East LCD Advancements LimitedInstituted in partPTAB · Jan 8, 2025 · IPR2024-00957 · APJ George R Hoskins · IPR · Institution
The Board instituted review of claims 1–8, 10–16, and 18 on all petitioned grounds, but did not institute review of disclaimed claims 9 and 17.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Pursuant to 35 U.S.C. § 314(a), institution of review requires the information in the record to demonstrate a reasonable likelihood that Petitioner would prevail with respect to at least one challenged claim. Applying that standard on behalf of the Director (37 C.F.R. § 42.4(a)), we institute an inter partes review to determine whether Petitioner demonstrates by a preponderance of the evidence that claims 1–8, 10–16, and 18 are unpatentable, considering all grounds in the Petition directed to those claims. We do not institute review as to claims 9 and 17 on any ground because they have been disclaimed. See 37 C.F.R. § 42.107(e).” slip op. at 2
- Adverse judgmentAdverse judgment
“disclaimer,” and “[n]o inter partes review will be instituted based on disclaimed claims.” 37 C.F.R. § 42.107(e). As a result of the statutory disclaimer, claims 9 and 17 are no longer regarded as claims challenged in the Petition. See Vectra, 162 F.3d at 1383 (“This court has interpreted the term ‘considered as part of the original patent’ in section 253 to mean that the patent is treated as though the disclaimed claims never existed.”) (citing Guinn v. Kopf, 96 F.3d 1419, 1422 (Fed. Cir. 1996)); see also Sanofi-Aventis U.S., LLC v. Dr. Reddy’s Labs., Inc., 933 F.3d 1367, 1372–75 (Fed. Cir. 2019) (disclaimer of claims during District Court patent infringement litigation “mooted any controversy” over the disclaimed claims, ending the Article III case or controversy requirement for District Court jurisdiction). In considering Federal Circuit precedent and our rules, we conclude we cannot institute a trial on claims that have been disclaimed, and, thus, no longer exist. Our conclusion is consistent with the statutory scope of inter partes review as laid out in 35 U.S.C. §§ 311(b) and 318(a) and is not at odds with SAS, supra. See, e.g., SAS, 584 U.S. at 367 (recognizing that “the claims challenged ‘in the petition’ will not always survive to the end of the case; some may drop out thanks to the patent owner’s actions”). Accordingly, we treat claims 9 and 17 as having never been part of the ’056 patent, such that Petitioner cannot seek inter partes review of those claims. Thus, we deny institution of review as to whether disclaimed claims 9 and 17 are unpatentable per Petitioner’s Grounds Three and Four.” slip op. at 32
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 8; Ex. 2001 ¶¶ 27–28. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’056 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“Petitioner argues “[n]o terms need to be construed . . . to resolve unpatentability.” Pet. 16–17. “Patent Owner contends that the claim terms should receive their ordinary and customary meaning in light of the specification and prosecution history, as understood by a person of ordinary skill in the art.” Prelim. Resp. 8. Patent Owner does not proffer any constructions for particular terms. See id. Based on the arguments and evidence presented at this time, we determine no explicit construction is needed to resolve the parties’ controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,454,056 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00976 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution because BOE did not show a reasonable likelihood of prevailing on claims 1–3 under any of its three obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“We have authority to institute an inter partes review where a petitioner shows a reasonable likelihood of prevailing with respect to at least one challenged claim. 35 U.S.C. § 314(a); 37 C.F.R. § 42.4(a). For reasons that follow, Petitioner does not meet that evidentiary threshold. We decline to reach the issues raised in the Reply or Sur-reply, which relate to Patent Owner’s alternative argument that a discretionary denial of the Petition is warranted.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“education could substitute for professional experience and vice versa.” Pet. 26. Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art” as “set forth in the Petition.” Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s unopposed definition (Pet. 26) because, on this record, it is consistent with the specification. We take note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe terms in controversy only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner discusses the terms a “data line having a broad-width portion” and a “scanning line having a broad-width portion” recited in claim 1, as well as a “data line having a broad portion” and a “scanning line having a broad-width portion” recited in claim 2. Petitioner cites the ’079 patent for “offering a lexicographic definition of the term ‘broad width’” to support the plain meaning interpretation of the terms “‘broad-width portion’ and ‘broad portion’ as a portion that is broader than another portion of the subject element.” Pet. 16. Patent Owner does not provide arguments directed specifically to Petitioner’s proposed claim constructions. See Prelim. Resp. 10–11. Taking account of the information presented, we determine that no claim term requires express construction for purposes of deciding whether to institute review. Compare Pet. 16 (addressing issues of claim construction, citing the ’079 patent for supporting the plain and ordinary meaning of “broad-width portion” and “broad portion” without demonstrating that an express construction is necessary to resolve whether to institute review), with Prelim. Resp. 10–11 (addressing the merits of Petitioner’s challenges, without asserting an express claim construction). To the extent that the scope of any claim term requires discussion, however, we provide it in the following analysis of the challenges.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Id. (emphasis added). Sato ¶ 26 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “data lines composed of an Al film.” Id. Importantly, Petitioner does not connect Sato’s disclosure, relating to benefits associated with a data line arrangement, to any particular arrangement of scan lines. Sato ¶ 28 is equally deficient. Sato ¶ 28 also discusses benefits of utilizing a specific “arrangement,” namely, “capacitance lines formed of [a] metal film.” Id. ¶ 28. [0028] With this arrangement, the provision of the function as the shading layer with the capacitance lines formed of the metal film, the polysilicon film, or the like, in addition to the function as the wiring, as well as the provision of the function as the light absorption layer with the capacitance electrodes formed of the polysilicon film, or the like, in addition to the function as electrodes, prevents the laminated structure from becoming complex by additionally forming a dedicated shading layer and a dedicated light absorption layer. Accordingly, this arrangement is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof. Id. (emphasis added). Here again, Sato ¶ 28 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “capacitance lines formed of metal film.” Id. Petitioner does not bridge the gap in its rationale to combine by attempting to explain why an ordinarily skilled artisan would have extrapolated benefits, pertaining to an arrangement of capacitance lines, to a similar arrangement of scan lines. Petitioner’s witness, Dr. Flasck, provides no further insight as to how or why Sato ¶¶ 26 and 28 would have been understood to apply to scan lines. Dr. Flasck’s comments on Sato ¶¶ 26 and 28 merely repeat, nearly verbatim, the Petition’s conclusory contentions. See Ex. 1002 ¶ 139 (Dr. Flasck declaring “Sato specifically teaches that its device ‘is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof.’”); Pet. 37. Dr. Flasck does not cite to any additional supporting evidence other than Sato ¶¶ 26 and 28. Ex. 1002 ¶ 139.” slip op. at 15
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 7,502,079 - PTAB · Dec 16, 2024 · IPR2024-00973 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–18 on all asserted grounds, finding a reasonable likelihood that BOE would prevail on claim 4 over Reiner.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“We secondly conclude Petitioner’s stipulation is commensurate in scope with a Sotera stipulation. See Sotera, Paper 12, at 13–14, 18–19; Guidance Memo, at 3. The Guidance Memo states: Consistent with Sotera Wireless, Inc., the PTAB will not discretionarily deny institution in view of parallel district court litigation where a petitioner presents a stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB. Guidance Memo, 3, 7–8. Thus, applying that guidance here, we do not deny institution in view of the Co-Pending Litigation.” slip op. at 9
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Skill levelSkill level petitioner adoptedDecided for petitioner
“to the ’157 patent “would have had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays,” and “[a]dditional relevant work experience can compensate for less education, and vice versa.” Pet. 15–16; Ex. 1003 ¶¶ 75–76. “Patent Owner does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 14; Ex. 2001 ¶¶ 19–20. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’157 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,184,157
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.