- Yealink (USA) Network Technology Co., Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentablePTAB · Apr 7, 2026 · IPR2024-01436 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1–3, 9–11, 19, 21, and 22 are unpatentable as obvious over Kaplan, Ahmed, and Deforche, and over Maeda, Ahmed, and Deforche.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person having ordinary skill in the art (POSITA) would have had at least a Master’s Degree in Electrical Engineering and five years of work experience in computer science and embedded systems, or a Master’s Degree in Computer Science and five years of work experience in electrical and computer engineering and embedded systems. the work experience. Pet. 10 (citing Ex. 1002 ¶¶ 36–37). Patent Owner does not dispute Petitioner’s definition of the level of ordinary skill in the art. PO Resp. 12. We adopt Petitioner’s proposed definition of a person of ordinary skill in the pertinent art, as it is consistent with the ’002 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“term “pre-installed generic driver.” Pet. 13; PO Resp. 9–10. Those proposed constructions are consistent with the lexicographic definition provided in the ’002 patent. In a section titled “Definitions,” the ’002 patent states: The term “pre-installed generic driver” is intended to mean a driver which is installed on a processing device such as a computer as a standard driver, e.g. is installed with the installation of the operating system. Such a driver is standard for the operating system and can drive a standard class of peripheral devices coupled to or connected to the processing device. Ex. 1001, 14:32–38. We apply this lexicographic definition in our analysis below.” slip op. at 9
- Expert testimonyPetitioner expert creditedDecided for petitioner
“a) Whether Dr. Almeroth’s Testimony should Be Given Little Weight Patent Owner argues that we should give little weigh to the testimony of Dr. Almeroth because Dr. Almeroth’s testimony is allegedly inconsistent across the related inter partes reviews. PO Resp. 13–19; PO Sur-reply 21– 22. We have reviewed the disputed portions of Dr. Almeroth’s testimony and, when read in context, we are not persuaded that the testimony is inconsistent so as to be afforded little weight. As Petitioner points out (Pet. Reply 2–3), Patent Owner’s arguments do not properly account for the context in which the testimony was given in the related inter partes review.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Patent Owner’s arguments are unpersuasive. We are not persuaded that these differences between Kaplan, Ahmed, and Deforche are dispositive. To the contrary, we find the differences establish why a POSITA would have further modified Kaplan and Ahmed with the teachings of Deforche. Deforche expressly teaches that a disadvantage of wireless modems is that they require installation of an appropriate driver before applications running on the computer device can use the functionality of the wireless modem to connect to wireless networks. Ex. 1030 ¶¶ 2–3. Deforche solves this problem by using the processing device’s pre-installed drivers, which can be for a human interface device, to set up a modem/host communication interface for communication. Id. ¶¶ 4, 9. Because “[d]ata traffic from the computer device towards the wireless communication network and vice versa is routed over this modem/host communication interface and uses the generic communication protocol provided by the preinstalled generic driver,” Deforche states this “has the advantage that the need for a specific driver for the communication between the wireless modem device and the computer device can avoided” and “the advantage that a user can use the wireless modem device on a computer device on which he has no administrator rights, i.e. a computer specific driver for the wireless modem device.” Id. ¶ 9. “The motivation-to-combine analysis is a flexible one. Any need or problem known in the field of endeavor at the time of and addressed by the patent can provide a reason for combining the elements in the manner claimed.” Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1379 (Fed. Cir. 2023) (internal quotations omitted). As the Federal Circuit held, “[t]here is a motivation to combine when a known technique has been used to improve one device, and a [skilled artisan] would recognize that it would improve similar devices in the same way.” Intel Corp., 61 F.4th at 1380. Here, Deforche establishes that utilizing an operating system’s preinstalled generic driver to provide a generic protocol communications between the processing device and a peripheral device was known for improving wireless modems because it does not require administrator rights and a specific driver to be installed to enable communications between the wireless modem device and the processing device.” slip op. at 20
Patent outcomesUS 10,762,002 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,762,002 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Jan 30, 2026 · IPR2024-01078 · APJ Neil T Powell · IPR · Final written decision
Claims 1–6, 11–15, and 38–43 were not shown unpatentable because Petitioner failed to establish obviousness over the asserted combinations, including the feasibility and motivation to use curved batteries in a ring.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 22; see also Ex. 2018 ¶ 27. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’953 patent and the references cited in the Petition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner expresses that it “does not believe that any term requires express construction.” Pet. 8. “Patent Owner agrees with Petitioner that no terms need to be construed.” PO Resp. 22. We agree with the parties that resolution of their dispute does not require us to construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“be improper hindsight in Petitioner’s position. Petitioner and Dr. Anthony assume that a POSITA would position the battery between Schröder’s ring halves and implement Mestas’s curved battery because it “allows a larger battery to conform to a ring’s circular shape without stressing the battery or ring housing.” Pet. 60, 64–65; Ex. 1002 ¶¶ 337, 351–354. That position, however, ignores alternative designs that are at least equally supported by Schröder’s disclosure (see Ex. 1007, Fig. 3), but would not result in a ring configured as recited in the challenged claims. Petitioner attempts to downplay this concern by characterizing the modification of Schröder’s ring to include Mestas’s curved battery as an obvious “matter of choice” in design. See Reply 10–11 (citing Ex. 1079 ¶¶ 71–77). We disagree. As explained above, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor because they are “5 to 10 times” the size that would be required for a finger ring. PO Resp. 27 (quoting Ex. 2021, 313:12). Petitioner argues that it “does not propose bodily incorporating Mestas’s battery into Schröder’s ring,” which on the surface is correct. See Reply 10. But this does not help Petitioner meet its burden because its actual obviousness theory that “a POSITA would have found it trivial to implement Mestas’s teachings into a ring like Schröder’s ‘finger-ring’” is not persuasive. See Pet. 60 (citing Ex. 1002 ¶ 338). For the same reasons explained in Section II.D.1 above in our analysis of Ground 1, Dr. Mestas’s teaching of a curved battery (Ex. 1002 ¶ 338) in the much smaller form factor of Schröder’s ring is not credible. See Ex. 2021, 315:9–318:9 (acknowledging that it would have been beyond the level of ordinary skill to miniaturize Mestas’s battery, but that a POSITA could try to procure one); 321:5–10 (conceding that he did not try to ascertain whether such a battery was available in the relevant time frame). Instead, we credit Dr. Mercier’s testimony that Petitioner’s proposed modification would have presented intractable practical challenges. Ex. 2018 ¶¶ 228, 230–240 (describing various aspects of battery design that Dr. Anthony did not consider). As before, Dr. Mercier’s testimony is further supported by evidence showing a consistent pattern of flat battery use in prior art finger-ring devices. See, e.g., Ex. 1005 (Niwa), Figs. 22, 29; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 57–67. In sum, Petitioner’s showing for limitation 1[c] is deficient in multiple respects. First, Petitioner assumes that an ordinarily-skilled artisan would have been motivated to implement Mestas’s curved battery in the much smaller interior space occupied by Schröder’s inlay 12 without sufficiently considering the feasibility of that modification or alternative designs suggested by Schröder. Second, even if we accept Petitioner’s purported rationale for the combination (which we do not because we find it that it is predicated on improper hindsight), Petitioner has not shown that an ordinarily-skilled artisan would have had a reasonable expectation of successfully implementing the proposed modification.” slip op. at 46
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“We find that the evidence presented by Patent Owner is sufficient to establish that the Oura Ring Gen. 3 Horizon and Gen. 4 products are commercial embodiments of claim 1 of the ’953 patent and that claim 1 is coextensive in that it encompasses the entire structural apparatus of these products. See PO Resp. 82–92; Ex. 2018 ¶¶ 322–346 (comparing these products to claim 1); Ex. 2029; Ex. 2030; Ex. 2118; Ex. 2119.9 Indeed, Petitioner does not challenge any aspect of Dr. Mercier’s limitation-by-limitation analysis showing that these products practice claim 1. But more than just practicing the claimed invention, Patent Owner’s evidence supports that claim 1 recites the overall structure that provides for the particular form factor of the Oura Ring Gen. 3 Horizon and Gen. 4 products, i.e., a fingerring “wedding band” design that allows for the electronic components to be entirely contained within the ring housing with a curved external surface having no protrusions or bulges. Ex. 2018 ¶¶ 359–360; see also id. ¶¶ 322–346 (pictures depicting wedding band design of the Oura Ring Gen. 3 Horizon and Gen. 4 products); Ex. 2019 ¶¶ 47–49 (“[Patent Owner’s] decision to highlight the ring form factor indicates this feature’s importance to the marketplace success of the Oura Ring.”). We disagree with Petitioner’s assertion that the Oura Ring Application and/or Oura Membership are essential, unclaimed features such that a presumption of nexus is not appropriate. The Oura Application functions in conjunction with the Oura Ring to form a “complete solution” 9 Patent Owner and Dr. Mercier only compare these products to claim 1. Patent Owner has not demonstrated a nexus to independent claim 38. ¶¶ 20–21. The Oura Application cannot receive or display any information absent the Oura Ring’s ability to collect the information from the user. Id. Even though the Oura Application may provide additional unclaimed functionality, such as displaying activity, sleep, and readiness scores based on the data collected by the Oura ring that allow “a user to take advantage of the ring’s offerings,” this functionality is secondary to the ring’s ability to collect that data, without which, the Oura Application would serve no purpose. See Ex. 2019 ¶ 21; Ex. 2024, 93:22–95:22. As the Federal Circuit has explained, “there is rarely a perfect correspondence between the claimed invention and the product.” Fox Factory, 944 F.3d at 1374. Here, we find that on the spectrum of “unclaimed features,” the Oura Ring Application is closer to the “insignificant features” end because, while it allows the user to access and interpret data tracked by their Oura Ring, it does not materially impact the functionality of the Oura Ring or its structure.10 See Teva 8 F.4th at 1361 (explaining that “like the coextensiveness requirement itself, the concept of unclaimed features is best viewed as part of a spectrum”).” slip op. at 27
Patent outcomesUS 10,281,953 not shown unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,281,953 - 3d Diagnostix, Inc. v. Watson Guide IP, LLCAll claims unpatentablePTAB · Jan 27, 2026 · PGR2024-00040 · APJ James A Tartal · PGR · Final written decision
Claims 1–3, 5–7, 10, 12, 14, 16, and 17 are unpatentable under § 103, including over Llop ’126 and Sichuan, and over Llop ’126, Sichuan, and Scherer for claims 5, 6, and 12.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for patent owner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art as of the earliest priority date of the ’209 patent “would at least have had a doctoral degree in dentistry and at least three to four years of experience working with guided dental surgery for installing dental implants and prostheses.” Pet. 13 (citing Ex. 1003 ¶ 49). Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 4. Based on our review of the record before us, we adopt Petitioner’s uncontested definition of a person of ordinary skill in the art, because it is supported by the evidence of record and consistent with the disclosure in the ’209 patent and in the asserted prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“1. “drill guide” and “fixation base” Petitioner contends that the claim terms “drill guide” and “fixation base” require construction “to resolve certain of the unpatentability grounds presented.” Pet. 13–14. In particular, Petitioner proposes that “drill guide” means “drill guide made from metal or metallic alloy without traditional plastic or acrylic,” and that “fixation base” means “fixation base made from metal, metallic alloy or other strong material without traditional plastic or acrylic.” Id. According to Petitioner, the Specification “teaches that the composition of the drill guide is ‘a metal or metallic alloy,’” and provides no other alternatives. Id. at 14 (citing Ex. 1001, 5:35–36). Petitioner similarly alleges that “fixation base” is described as “being fabricated from a metal, metal alloy, or other strong material,” and that “traditional plastic or acrylic” is excluded in light of disclosures in a provisional application. Id. at 21–24. According to Petitioner, its proposed constructions should be adopted “based on disclaimer of claim scope in the provisional application incorporated into the [’209] patent specification.” Id. at 14–24. Patent Owner contends that we need not address the constructions proposed by Petitioner because the issues addressed by Petitioner’s proposed constructions only concern allegations of unpatentability directed to claims 11 and 13, which Patent Owner disclaimed. Resp. 4–5; Disclaimer 1. In Reply, Petitioner argues that its proposed constructions are relevant to Patent Owner’s evidence of objective indicia of non-obviousness, including the alleged nexus. Reply 18–19 n.3. In light of our analysis below, because no determination in this Decision turns on whether we adopt Petitioner’s proposed constructions of “drill guide” and “fixation base,” we find that no express construction of these terms is required. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“substitution of the word ‘enclose’ for the term ‘surround.’” Sur-reply 6. We noted in the Institution Decision that “construing the claim term ‘surround’ to mean ‘enclose’ does not further inform or clarify to a person of ordinary skill in the art what is encompassed by the claim limitation.” Dec. 15. We reach the same conclusion here on the full record and find no basis to rewrite the Challenged Claims to replace “surround” with “enclose.” To the extent Patent Owner can be understood to suggest that we import additional limitations into the claims based on the exemplary figures in the ’209 patent, we decline to do so. Regardless, given the recognition by the Parties that “surround” and “enclose” are synonymous, our determinations in this Decision would have been the same had we adopted Patent Owner’s proposed definition of “surround” to mean “enclose.” Further, with regard to the claim language “configured and dimensioned to surround at least a portion of the teeth of the patient,” Patent Owner proposes construing “a portion of the teeth” as “at least some teeth.” Resp. 9 (citing Ex. 2007 ¶ 44). Patent Owner, however, offers no sufficient explanation in its Response to explain how why a “portion of the teeth” means “at least some teeth.” The Specification does not provide an explicit definition of “a portion of the teeth” and does not suggest an intention to use a meaning of the term “a portion of the teeth” that is particular to the ’209 patent. To the extent Patent Owner can be understood to imply that we should import additional limitations into the Challenged Claims based on the exemplary figures in the ’209 patent, we decline to do so. For that reason, alone, we decline to adopt Patent Owner’s proposed construction.” slip op. at 17
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“38; Sur-reply 9–10. First, Patent Owner argues that Sichuan is non-analogous art. Resp. 34–38. “To be considered within the prior art for purposes of the obviousness analysis, a reference must be analogous.” Circuit Check Inc. v. QXQ Inc., 795 F.3d 1331, 1335 (Fed. Cir. 2015) (citing Wang Labs., Inc. v. Toshiba Corp., 993 F.2d 858, 864 (Fed. Cir. 1993)). “Two separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed and, (2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” Sanofi-Aventis Deutschland GmbH v. Mylan Pharms. Inc., 66 F.4th 1373, 1377 (Fed. Cir. 2023) (quoting In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004)).” slip op. at 36
Patent outcomesUS 11,806,209 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,806,209 - Reolink Innovation Inc. / Shenzhen Reolink Technology Co., Ltd. v. Throughtek Co., Ltd.All claims unpatentablePTAB · Jan 23, 2026 · IPR2024-01192 · APJ Michael J Strauss · IPR · Final written decision
Claims 1–10 and 16 are unpatentable as obvious over the asserted combinations of the Lorex Manual or Lorex Video with the identified references.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for petitioner
“Patent Owner does not dispute any of Petitioner’s contentions as to the effective filing date, stating in agreement with Petitioner’s asserted Effective Filing Date of the Challenged Claims that “[t]he ’916 Patent claims a priority of a provisional application 61/924,240 filed on January 7, 2014.” PO Resp. 8. Given that the parties are in agreement on the January 7, 2014, effective filing date, we similarly use January 7, 2014, as the effective filing date of the challenged claims for purposes of this Decision.” slip op. at 4
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Relying on the testimony of Vlad Kardashov, Petitioner proposes that a person of ordinary skill in the art at the time of the invention of the ’916 patent “would have had a bachelor’s degree in electrical engineering and two 7 US 2012/0198040 A1, published August 2, 2012 (Ex. 1011, “Kuo”). 8 The subject ’916 patent claims priority to Kuo as a continuation-in-part of that earlier filed application. Ex. 1001, code (63). 9 Lorex Technology Inc., “How to set up remote access for DVR using - Lorex Stratus Connectivity” (June 18, 2013), available at https://www. youtube.com/watch?v=fMPRi9WFuTM (Ex. 1012, the “Lorex Video”). 10 US 2012/0113265 A1, published May 10, 2012 (Ex. 1013, “Galvin”). years of work experience with network and communication technologies.” Pet. 8 (citing Ex. 1003 ¶¶ 12–14). Patent Owner does not contest Petitioner’s proposal or provide a proposal of its own. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is consistent with the technology described in the ’916 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that “no claim elements need a formal construction for purposes of resolving controversies in this proceeding.” Pet. 9 (citing Ex. 1003 ¶¶ 43–44; Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011), Google Inc. v. Intellectual Ventures II LLC, 701 Fed. Appx. 946, 956 (Fed. Cir. 2017)). Petitioner states “[a]ll claim terms should be construed according to the Phillips standard.” Id. (citing Phillips, 415 F.3d at 1303; 37 C.F.R. § 42.100). Patent Owner presents no proposed claim constructions. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPriority date awardedDecided for petitioner
“that Patent Owner fails to demonstrate that the Lorex Manual was based on a disclosure made by the inventor or joint inventor or by another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. The Lorex Manual is relied on under Ground 1A, exclusively or in the alternative to or in combination with Kim, for all claim elements. Pet. 9– 31. Patent Owner fails to demonstrate that this subject matter was disclosed to Lorex by ThroughTek, much less by one of the inventors of the ’916 Patent.” slip op. at 22
Patent outcomesUS 9,774,916 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,774,916 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Dec 17, 2025 · IPR2024-01077 · APJ Michael A Valek · IPR · Final written decision
Claims 1, 11, and 13–20 were not shown unpatentable over either Yuen and Mestas or Schröder and Mestas, principally because the curved-battery and waterproof-cavity showings were deficient.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“We agree with Petitioner that the term “ring” is not limited to a finger- worn ring. All of the challenged independent recite a “wearable ring computing device” (claims 1 and 11) or “ring computing device” (claim 14). Nothing in the claim language itself refers to where that device is worn. Moreover, the fact that Patent Owner has in several related patents added claim language to expressly recite a ring that is “finger-worn” or “worn around the finger” evidences that the plain meaning of the term “ring” by itself does not require such. Ex. 1362, 44:45–46:61 (claims 1–18); Ex. 1363, 44:64–46:56 (claims 1–17); Ex. 1364, 48:22–23 (claim 1); see Nystrom v. TREX Co., Inc., 424 F.3d 1135, 1143 (Fed. Cir. 2005) (explaining that the fact that another claim recites a “wood decking board” suggests the term “board” is not itself limited to one made from wood or cut from a log because “[w]hen different words or phrases are used in separate claims, a difference in meaning is presumed”). This understanding is further supported by the Specification of the ’859 patent. It is true, as Patent Owner asserts, that the Specification describes a preferred embodiment that is a finger-worn ring. See, e.g., Ex. 1001, Figs. 22A–B, 23A (depicting a finger-worn ring). But precedent cautions against importing limitations from the preferred embodiment into claims. See, e.g., Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2004) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”). Indeed, the Specification here anticipates such arguments and makes clear that the applicants’ wearable computing device (WCD) is not limited to a ring worn on the finger: The WCD can be in the form of a ring that can be worn on the finger of a human (or animal) user. Although the WCD of the present disclosure is depicted as a ring that can be worn on the finger of a user, other shapes, designs, and form factors can be utilized for the WCD. For example, the WCD can be in the form of a wrist band, bracelet, necklace, earring, or any other type of wearable accessory. In this regard, references to the finger of a user in the present application can be considered to apply to other portions of a human body depending on the form of the WCD, such as wrist, neck, ear, etc. Ex. 1001, 8:51–61.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“ordinarily-skilled artisan to modify Yuen’s device to form the waterproof cavity recited in claim 1, much less explain the particular modifications Petitioner contends that artisan would have made to Yuen’s device housing to achieve such. This is particularly problematic given that the figures Petitioner relies upon in Yuen and Mestas uniformly depict larger, wrist/arm-band type devices. See Ex. 1006, Figs. 2–13, 12:52–55 (depicting a “wrist-worn or arm-mounted accessory such as a watch or bracelet”); Ex. 1010, Figs. 1–6, ¶ 151 (same). Thus, Petitioner’s obviousness theory requires multiple modifications to Yuen’s depicted structure: (1) modifying the identified portions of Yuen’s device housing so that they form a waterproof cavity therebetween; and (2) shrinking that device and its components down to a ring designed to fit around a single toe. We credit Dr. Mercier’s testimony that such modifications would require a “complex” re-engineering of Yuen’s existing structure that Petitioner and Dr. Anthony do not sufficiently explain. See Ex. 2018 ¶¶ 108–109, 129–130, 137–138. The testimony in Dr. Anthony’s supplemental declaration does not provide the missing explanation. Dr. Anthony continues to assert that Yuen’s sensor protrusion is sealed in the space between the alleged bounding members, relying on the same annotated versions of Figures 4 and 5, without addressing the fact that according to Petitioner’s own annotations those bounding members only form a shell that is open to the attachment band at either end. See Ex. 1079 ¶¶ 26–28. Indeed, Dr. Anthony appears to acknowledge that Yuen only teaches attaching the sensor module portion of the alleged cavity with watertight glue, but asserts that “it would not make sense to have a device that is waterproof in some areas and not others.” Id. ¶ 29. That assertion, however, is not supported by anything beyond Dr. Anthony’s say-so and ignores that Yuen’s teachings regarding a watertight seal/glue refer only to the sensor package portion of the alleged cavity. See Ex. 1006, 14:66–15:4, 15:10–14. Dr. Anthony’s assertion that Mestas teaches additional “waterproofing techniques” that could be applied to Yuen’s housing is similarly cursory. See Ex. 1079 ¶ 30. He does not identify what those techniques are or how a POSITA would use them to modify Yuen. Id. Accordingly, we do not credit this testimony.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“the asserted evidence of secondary considerations and a patent claim if the patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988) (emphasis added)). “That is, presuming nexus is appropriate when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.” Id. (internal quotation marks omitted). If, on the other hand, “the thing that is commercially successful is not coextensive with the patented invention—for example, if the patented invention is only a component of a commercially successful machine or process, the patentee is not entitled to a presumption of nexus.” Id. (internal quotation marks omitted).” slip op. at 33
Patent outcomesUS 10,139,859 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,139,859 - PTAB · Dec 16, 2025 · IPR2025-01046 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 2–15, finding a reasonable likelihood that the 1946 Cyclopedia, Lindström, and Wong render at least claim 2 obvious; claim 1 was disclaimed.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner responds that Petitioner’s proposed level of ordinary skill in the art is incorrect, “because design or analysis experience with other industrial wheeled vehicles would not necessarily be applicable to the art of the ’892 Patent.” Prelim. Resp. 12 (citing Ex. 2035 ¶¶ 38–39). According to Patent Owner, a person of ordinary skill in the art “would have at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Id. (citing Ex. 2035 ¶¶ 34, 38). The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years 5 Because Patent Owner statutorily disclaimed claim 1, this ground is moot. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 12. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted.” slip op. at 12
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge would not.” Prelim. Resp. 12–13 (citing Ex. 2035 ¶ 39). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this stage, we need not construe expressly any claim term to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing on at least one challenged claim. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))” slip op. at 14
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“been obvious over the 1946 Cyclopedia and Wong. Weighing the parties’ arguments and evidence, we find Petitioner provides sufficient rational underpinning for its assertion that it would have been obvious in view of Wong to implement a cross-wise extending beam to reinforce the 1946 Cyclopedia’s NSC ore car’s end slope sheet. Pet. 52–53; Prelim. Resp. 28– 30. In response to Petitioner’s assertion that “[t]he upper, outboard end of [Wong’s slope sheet 26] is reinforced by a cross-wise, L-shaped beam positioned under the slope sheet,” Patent Owner argues that “Wong does not provide reinforcement, but simply shows two sheets being connected for lading containment and load transfer.” Pet. 52; Prelim. Resp. 29. At this stage, we find Petitioner has the better position. Although we agree with Patent Owner that Wong shows two sheets connected to one another, that does not negate Petitioner’s correct observation that Wong shows an upper end of its end slope sheet 26 resting on an L-shaped structure, which apparently would reinforce end slope sheet. Pet. 52; Ex. 1003 ¶ 56. reason to look to Wong in the first place,” we again find that Petitioner has the better position at this stage. Prelim. Resp. 29. For example, Wong’s disclosure of “hopper railcar 10” (Ex. 1006, 3:6–9) and the 1946 Cyclopedia’s disclosure of “Freight Cars: Hopper Ore” (Ex. 1004, 27–28; Ex. 1054, 27–28) support Petitioner’s position that “Wong and the 1946 Cyclopedia are in the same field.” Pet. 52; see also id. at 76 (“Wong discloses a rail road hopper car (‘hopper railcar’ 10)”), 18–19 (“The ore-car section of the 1946 Cyclopedia—entitled ‘Freight Cars: Hopper Ore’— contains drawings and a photograph of an ore car manufactured by Patent Owner NSC.”); Ex. 1003 ¶ 56 (“Wong and the 1946 Cyclopedia are in the same field of hopper railcars”) (citing Ex. 1004, 27–28; Ex. 1006, code [57]). This position is not persuasively rebutted by Patent Owner’s argument that Wong’s hopper railcar 10 uses aluminum and steel together for certain reasons. Prelim. Resp. 28–29.” slip op. at 23
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,166,892 - PTAB · Dec 16, 2025 · IPR2025-01047 · APJ Hyun J Jung · IPR · Institution
The Board instituted IPR of claims 1–44 on all presented challenges, finding a reasonable likelihood that FreightCar would prevail on at least one claim based on Hart, the 1906 Cyclopedia, and Wong.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and for the reasons explained below, we determine that Petitioner has shown a reasonable likelihood of prevailing with respect to at least one of the challenged claims. Thus, we institute an inter partes review of claims 1–44 of the ’515 patent on all presented challenges. 37 C.F.R. § 42.108(a) (2024) (“When instituting . . . review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”); see also SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Pet. 29; Prelim. Resp. 9. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 9. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted. Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“to further support the upper, outboard end of the slope sheet with a crosswise, L-shaped beam as in Wong,” and one of ordinary skill in the art would have been motivated to do so, because of “the benefits of reinforcing the slope sheet at its upper end, where its connection with another structure creates a stress concentration.” Pet. 63 (citing Ex. 1003 ¶ 108). Petitioner points to Hart’s transverse beam b3 and argues that it suggests using a transverse beam like Wong if Hart is modified so that upper beam b3 no longer supports the slope sheet. Id. (citing Ex. 1008, Fig. 1). Petitioner also argues that the references are in the same field and that there would have been a reasonable expectation of success. Id. at 63–64 (citing Ex. 1003 ¶ 108; Ex. 1008, Fig. 1). Based on the preliminary record, Petitioner shows that its proposed combination of Hart, the 1906 Cyclopedia, and Wong teaches or suggests the above-quoted limitations of claim 24 and that one of ordinary skill in the art would have combined those references in the manner asserted with a reasonable expectation of success.” slip op. at 19
§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,132,515 - Reolink Innovation Inc. / Shenzhen Reolink Technology Co., Ltd. v. Throughtek Technology (Shenzhen) Co., Ltd. And Throughtek Co., Ltd.All claims unpatentablePTAB · Dec 15, 2025 · IPR2024-01193 · APJ David C Mckone · IPR · Final written decision
Claims 1–3, 5, 7–13, 15–19, and 23–25 are unpatentable: claims 1, 7, 8, 10, 11, 15, 16, 18, 19, and 23–25 as anticipated by Zhang; all challenged claims also as obvious over at least one …
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“person of ordinary skill in the art “would have had a bachelor’s degree in electrical engineering and two years of work experience with network and communication technologies.” Pet. 5 (citing Ex. 1003 ¶¶ 13–15). Patent Owner does not contest Petitioner’s proposal or provide a proposal of its own. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is consistent with the technology described in the ’448 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededTerm construed board ownMixed
“construction of “feature flag” is inconsistent with the language of claim 8, which states that “the feature flag indicates that the running state of the second apparatus is the sleep state.” Petitioner also argues that Patent Owner’s proposal is not supported by claim 24, which depends from claim 23 and states that “the feature flag is located at a header of the sleep login packet.” Id. at 3. We agree with Petitioner. The plain language of claim 8 states what a feature flag indicates. Claim 24 recites where the feature flag is located. Neither claim suggests any of Patent Owner’s additional limitations.” slip op. at 13
- Expert testimonyPetitioner expert creditedDecided for petitioner
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“[A] prior art reference will anticipate if it ‘disclose[s] each and every element of the claimed invention . . . arranged or combined in the same way as in the claim.’” Blue Calypso, LLC v. Groupon, Inc., 815 F.3d 1331, 1341 (Fed. Cir. 2016) (quoting In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009) (alteration by Federal Circuit)). “However, a reference can anticipate a claim even if it ‘d[oes] not expressly spell out’ all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would ‘at once envisage’ the claimed arrangement or combination.” Id. (quoting Kennametal, Inc. v. Ingersoll Cutting Tool Co., 780 F.3d 1376, 1381 (Fed. Cir. 2015) (alteration by Federal Circuit); In re Petering, 301 F.2d 676, 681 (CCPA 1962)). For the reasons explained below, we are persuaded that Petitioner has shown, by a preponderance of the evidence, that claims 1, 7, 8, 10, 11, 15, 16, 18, 19, and 23–25 are anticipated by Zhang. slip op. at 16
Patent outcomesUS 10,602,448 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,602,448 - PTAB · Dec 12, 2025 · IPR2025-01327 · APJ Sheila F Mcshane · IPR · Institution
The Board instituted IPR of claims 1–19 on all asserted grounds, finding a reasonable likelihood of prevailing on the Schwan-Lee and Schwan-Lee-Strickland obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“partes review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the petition and the preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We therefore institute inter partes review as to all of the challenged claims of the ’655 patent and all of the asserted grounds of unpatentability in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“III. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art: would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent, and two years of work experience with network devices and communication technologies. EX1003, ¶¶17–19. Additional education might compensate for less experience, and vice versa. Pet. 4 (citing Ex. 1003 ¶¶ 17–19).” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for petitioner
“The ’655 patent Specification states that: The topology data table 21 of the online server 20 is mainly recorded with a link data 49 between each of the P2P devices 41– 46 within the P2P device community. The link data 49 refers to the connection relationship between the P2P devices 41–46, which includes, but is not limited to, the connection structure, connection data and/or locations of connection. Ex. 1001, 4:51–57. On this preliminary record, we agree with Petitioner that the term “link data” is a “connection relationship between the P2P devices.” This meaning is consistent with the ordinary meaning of the term within the context of the claim, that is, “link data” means data on the links (connections) between each of the P2P devices, where the Specification provides a more fulsome meaning that the term includes, at least, “the connection structure, connection data and/or locations of connection.” See id. at 4:55–57. We invite the parties to provide additional briefing on the construction of this term during trial.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Lee discloses that the P2P overlay is generated with the overlay generation unit 220 that generates the P2P overlay by analyzing information regarding “the corresponding application service, the peer, and the network,” where the network information “may include a network topology, a maximum bandwidth, a current network usage, [and] a transmission delay time, and the like.” Ex. 1005 ¶ 54. We determine that this disclosure provides support for Mr. Lett’s testimony that “Lee describes techniques for changing an overlay in response to changing network characteristics,” which could be beneficial. Ex. 1003 ¶ 48. Accordingly, on this preliminary record, we find this evidence is sufficient to support a rationale to combine Schwan and Lee. See KSR, 550 U.S. at 401 (“[I]f a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious.”).” slip op. at 13
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,727,655 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.All claims unpatentablePTAB · Dec 2, 2025 · IPR2024-00928 · APJ Neil T Powell · IPR · Final written decision
Claims 1–5, 11–13, and 16–18 are unpatentable as obvious over Schröder and Yuen, LeBoeuf, or LeBoeuf and Wissmar; Schröder alone did not render its challenged claims unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 14. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’034 patent and the references cited in the Petition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner has the better position, as we agree with Petitioner that the ’034 patent discloses an embodiment that uses transparent potting as a window, rather than to form the overall form factor and encapsulate components: [Figure] 16C is a perspective view of the WCD with potting material 1630. As described above, the PCB, battery, and components can be disposed within the space. Once disposed therein, a potting 1630 can be provided atop the components and within the cutaway portion 1616. The potting 1630 can be transparent to allow for transmission of light through the cutaway portions 1616. Ex. 1001, 20:51–57. This configuration is shown below in Figure 16C. “[Figure] 16C is a perspective view of the WCD with potting material.” Ex. 1001, 6:1–2. As Figure 16C shows, potting material 1616 forms a window in only a portion of the WCD’s exterior. can be used to encapsulate components and form the overall form factor in some embodiments. E.g., Ex. 1001, 17:4–8, 18:61–62. But Patent Owner does not persuade us that claim 12 is limited to those embodiments. PO Resp. 29; SuperGuide Corp. v. DirecTV Enters., Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not part of the claim.”). Accordingly, we do not construe claim 12’s “external transparent potting” as requiring material that “forms the ‘overall form factor of the WCD 120, in addition to providing a housing for one or more electronic components,’” as suggested by Patent Owner. PO Resp. 29. Nor do we construe the claim language as requiring material that “also fills the space and encapsulates the components,” as suggested by Patent Owner. Id.” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position. Although Schröder describes some aspects that are similar to those of a printed circuit board, Petitioner has not sufficiently demonstrated that a person having ordinary skill in the art would understand Schröder’s inlay 12 or carrier foil to be a “printed circuit board,” as recited in independent claims 1, 11, and 16. As an initial matter, while Schröder refers to a “circuit board” in another context, it never refers to the carrier foil or inlay in its finger-ring embodiment as such. See Ex. 1007, 22:48–49; see also Ex. 1079 ¶ 21 (Dr. Anthony acknowledging that Schröder’s only reference to a “circuit board” is “unrelated to Schröder’s finger-ring teachings”). Instead, Schröder describes features of that inlay, explaining that “[t]he carrier foil itself consists of a flexible plastic material, e.g.[,] PET or Kapton” and “antenna coil 8 can for example be printed on the carrier foil by means of a conductive paste” and “a depression is manufactured in the carrier foil, e.g.[,] by milling, lasering, etching, before the chip module 10, the antenna coil 8 and optional further electronic devices are inserted into the depression.” Ex. 1007, 13:26–31, 13:35–37. Schröder further describes that “[a]t least one further foil can be applied to the carrier foil or the ring blank on at least one side” to produce a “multilayer foil composite” that can be “interconnected” by means of “glue” slip op. at 23
- Expert testimonyPetitioner expert discountedOther
“show that Schröder’s inlay 12 is a PCB. Relying on testimony from Dr. Anthony, Petitioner asserts that Schröder’s inlay 12 serves as a flexible carrier made of materials “commonly understood to be printed circuit board materials” such as PET and Kapton. Pet. 23 (citing Ex. 1002 ¶ 172; Ex. 1006, 12:28–29). Dr. Anthony did not provide a clear explanation of a person of ordinary skill in the art’s understanding of a PCB in his direct testimony. article describing a PCB as a “laminated sandwich structure of conductive and insulating layers” was an accurate description of a PCB: Q. So is the first sentence of this Wiki page, in your mind, an accurate description of a printed circuit board? A. So, the first sentence, “A printed circuit board (PCB)[] also called [a] printed wiring board, []is a laminated sandwich structure of conductive and insulating layers, each with a pattern of traces, planes, and other features (similar to wires on a flat surface) etched from one or more sheets of copper laminated onto or between sheet layers of nonconductive substrate.” And so your question again was? Q. Is that a fair definition of printed circuit board in your mind? A. It’s a fair description of the general process for circuit boards, layers of conductive traces.” slip op. at 21
Patent outcomesUS 9,582,034 unpatentableClaim construction§ 103 obviousnessPatents in suitUS 9,582,034
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.