• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentable
  PTAB · Jul 1, 2026 · IPR2025-00222 · APJ Frederick C Laney · IPR · Final written decision

  Claims 1, 2, 4, 5, 8–11, 13, and 14 are unpatentable over Yu and Miyazaki; claims 15, 16, and 19 were not shown unpatentable over Matsushima.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “at, and before, the earliest claimed priority date of the ’158 patent . . . would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2–3 years of experience in digital imaging systems,” adding that “[l]ess experience may be sufficient with additional education, and likewise, less education may be sufficient with additional work experience.” Pet. 6–7 (citing Ex. 1003 ¶¶ 16–18). Patent Owner does not offer a competing definition or dispute Petitioner's articulation. Based on the entire record, we adopt Petitioner’s characterization of the level of skill for one of ordinary skill in the art because that characterization, we find, is consistent with the ’158 patent and the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “We determine that the claims require a per-channel determination of integration time—that is, an integration time arrived at for each sensor or channel individually—and cannot be satisfied by a single global value merely applied uniformly across the sensors. We do not, however, read the independent claims to require that the per-channel integration times differ from one another.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “We adopt the definition clearly and unambiguously set forth in the specification, which was likewise adopted by the Court in the related litigation. See Pet. 7–8, 55; Pet. Reply 1–2 (district court construing the term to mean “the time the image sensor collects and integrates signal from the scene”). The specification states that the integrated photo-charge “is directly related to the time the image sensor collects and integrates signal from the scene,” and that “[t]his is known as integration time.” Ex. 1001, 4:4–7. Accordingly, the ’158 patent demonstrates that the inventors indisputably acted as a lexicographer for the term “integration time.”” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “We construe “during a frame” to mean the period during which data for a single frame of an image is captured. The limitation is satisfied where the per-channel integration time is effectuated during the frame; it does not require that the integration time be re-determined mid-frame, nor does it require actuation of a “charge integration switch.” The specification’s only use of the phrase confirms this reading: “each camera channel is controlled during a frame under an independent integration time.” Ex. 1001, 3:45–50. Consistent with that usage, the specification describes selecting an integration time for each channel and then integrating the photo-signal “within a single frame of data,” and describes placing the charge-integration switch in a state to allow charge to accumulate for the selected period and then transferring the accumulated charge upon completion of the integration period. Id. at 4:51–54, 11:3–18. We decline Patent Owner’s proposal to require in-frame actuation of a charge-integration switch, for the same reason we decline to import that structure into “integration time.” We also decline to read the phrase to require mid-frame re-determination of the integration time, because the patent’s own embodiment selects an integration time and then integrates charge during the frame under that selected time. Ex. 1001, 4:51–54, 11:3– 18. So construed, “during a frame” is not redundant of the independentclaim limitation: it adds that the per-channel control occurs within a single frame (intrascene), as distinct from adjustment from one frame to the next (interscene).” slip op. at 15

  Patent outcomesUS 9,232,158 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,232,158
• Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00169 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 50–54 are unpatentable as obvious over KR996 and JP705; claims 55–63, 68, 69, and 80–85 were not shown unpatentable over KR996, JP705, Bares, and Beltrami.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “(“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 35

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 57

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “e) Conclusion as to the Independent Claim 50 For the reasons discussed above, the evidence presented by Petitioner” slip op. at 67

  • ExcludeMotion to exclude, grantedGranted in part

    “For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 19

  Patent outcomesUS 9,321,386 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,321,386
• Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00170 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1–18 are unpatentable over KR996 and the KR996/Bares combination; Petitioner did not prove claims 19–36 unpatentable over KR996, Bares, and Beltrami.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “(10) Conclusion as to Objective Indicia We have considered, as a whole, all of Patent Owner’s arguments and admissible evidence concerning secondary considerations. If we were to presume nexus, we give some weight to Patent Owner’s admissible evidence of industry praise and skepticism at the time of invention. d. Conclusion as to Claim 1 For the reasons discussed above (§§ II.F.2.a–b), the evidence” slip op. at 62

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness” slip op. at 52

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “lexicographical, we agree with the parties that “mainframe” is not limited to a single weldment. Pet. Init. CC Br. 1; PO Init. CC Br. 1–2. Instead, a single-weldment “mainframe” is merely one disclosed embodiment. See Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”). Turning to the prosecution history, neither Petitioner nor Patent Owner has highlighted any specific statements that impact the scope of the term “mainframe.” And from our independent review, we do not discern any such statements. For these reasons, the intrinsic evidence as a whole supports construing “mainframe” as a primary supporting structure.” slip op. at 33

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedMixed

    “2. Analysis “The moving party has the burden of proof to establish that it is entitled to the requested relief.” 37 C.F.R. § 42.20. a. Exhibits 1005, 1006, and 1014 Exhibit 1005 is an English language translation of Korean Patent No. 10-1041996. Exhibit 1006 is an English language translation of Japanese document JP2004-17705A. Exhibit 1014 is an English language translation of Korean Patent No. 10-1023528. A Certification of Translation signed by Takashi Maeshiro of HC Language Solutions, Inc., accompanies each of Exhibits 1005, 1006, and 1014. Ex. 1005 at 28; Ex. 1006 at 16; Ex. 1014 at 16. Each Certification of Translation is worded substantially the same except for the references to the document at issue and the source language being either Korean or Japanese. Exhibit 1005’s Certification of Translation, for example, states: I, Takashi Maeshiro, on behalf of HC Language Solutions, Inc., do solemnly and sincerely declare, to the best of my knowledge and belief, that the attached text represents a translation of Korean Patent No. 10-1041996, that the translation was performed by HC Language Solutions, Inc., and that the translation represents a true, correct, and faithful translation from Korean to English in a form that reflects the intention and meaning of the original text. I hereby declare that all statements made herein of my own knowledge are true and that all statements made on information and belief are believed to be true; and further that these statements were made with the knowledge that willful false statements and the like so made are punishable by fine or imprisonment, or both, under Section 1001 of Title 18 of the United States Code. Ex. 1005 at 28 (emphasis added). Patent Owner argues that the Certifications of Translation do not” slip op. at 18

  Patent outcomesUS 9,975,750 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 9,975,750
• Apple Inc. v. Smart Mobile Technologies LLCSome claims unpatentable
  PTAB · Jun 3, 2026 · IPR2022-00981 · APJ Jameson Lee · IPR · Remand

  On remand, claims 8–11, 13, 17, and 19 were held unpatentable over Rautiola, Regnier, and Sainton; claim 15 was not shown unpatentable.

  RulingsRemand decision

  • RemandMixed

    “8–11, 13, 15, 17, and 19, and remanded “for consideration of the patentability of those claims.” Id. at 14. We understand both the reversal and vacature are with respect to Ground 1 of alleged unpatentability, not Ground 2, because the Federal Circuit’s decision did not discuss anything relating to Ground 2. Paper 43. The parties agreed. Paper 44. In this remand proceeding, neither party requested the filing of additional briefing or evidence. In a telephone conference call, both parties expressed agreement with the Board (1) that “there is no issue regarding collateral estoppel or issue preclusion with respect to dependent claims 8– 11, 13, 15, 17, and 19, and (2) that the remand proceeding would not involve the Board revisiting any matter or issue concerning alleged obviousness of claims 1, 8, 9, 11, 13, 17, and 19 over Ground 2.4 Papers 43, 44. The parties also agreed that the remand proceeding would only involve the Board reviewing the alleged obviousness of dependent claims 8–11, 13, 15, 17, and 19 as obvious over Rautiola, Regnier, and Sainton. Id. We have authority to conduct this inter partes review under 35 U.S.C. § 6. This Final Written Decision on Remand is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. On the record before us, which is the same as the record before us at the time we issued the first final written decision (Paper 34), we determine that Petitioner has proved by a preponderance of the evidence that claims 8– 11, 13, 17, and 19, but not claim 15, of the ’936 patent are unpatentable over Rautiola, Regnier, and Sainton.” slip op. at 3

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “5. Petitioner’s Request to Discredit Dr. Cooklev’s Declaration Petitioner makes several arguments discrediting Dr. Cooklev’s declaration (Ex. 2031) and asserts that Dr. Cooklev’s declaration should be accorded little to no weight. Reply 13–14. We have already considered and rejected this request in the Final Written Decision issued on November 7, 2023. Paper 34, 21–23. Our reasoning need not be reiterated here. Petitioner does not persuade us that Dr. Cooklev’s declaration testimony should be accorded little to no weight.” slip op. at 15

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute Petition’s definition of level of ordinary skill. See generally PO Resp. Patent Owner’s expert, Dr. Cooklev, accepts Dr. Kotzin’s proposed level of ordinary skill in the art. Ex. 2031 ¶ 24. We adopt Petitioner’s proposal regarding the level of ordinary skill in the art. This level of ordinary skill in the art is supported by the testimony of Dr. Kotzin (Ex. 1003 ¶¶ 20–22) and is consistent with the level reflected in the ’936 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “only when it is analogous to the claimed invention.” Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1379 (Fed. Cir. 2019). A prior art reference constitutes analogous art if it is “from the same field of endeavor” or “reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). The petitioner bears the burden of establishing that a reference is analogous art. See Sanofi-Aventis Deutschland GmbH v. Mylan Pharms. Inc., 66 F.4th 1373, 1377 (Fed. Cir. 2023).” slip op. at 16

  Patent outcomesUS 8,472,936 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,472,936
• Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCSome claims unpatentable
  PTAB · May 4, 2026 · IPR2021-01452 · APJ Sheridan K Snedden · IPR · Remand

  On remand, claims 6, 8, 9, 13, and 19 are unpatentable; claims 2–5, 11, 12, 17, and 18 were not shown unpatentable over Slater or Slater and Weaver.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, 12, 17, and 18 of the ’716 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 188–196. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 191– 196. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 18

  Patent outcomesUS 9,763,716 mixed
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 9,763,716
• Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentable
  PTAB · May 4, 2026 · IPR2021-01450 · APJ Sheridan K Snedden · IPR · Remand

  On remand, claims 6, 8–10, 14, and 17 are unpatentable; claims 2–5, 12, and 13 were not shown unpatentable, based on anticipation by Slater and obviousness over Slater and Weaver.

  RulingsRemand decision

  • RemandMixed

    “Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 11 of U.S. Patent No. 8,529,608 B2 (“the ’608 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6, 8–10, 12–14, and 17 (the “Remanded Claims”) are similarly unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. at 14–15. We have jurisdiction under 35 U.S.C. § 6. We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Stryker Corporation and Wright Medical Technology, Inc. (collectively, “Petitioner”) and OsteoMed LLC (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Stryker, we find by a preponderance of the evidence that claims 6, 8–10, 14, and 17 are unpatentable. We also conclude that Petitioner has not demonstrated, by a preponderance of the evidence, that claims 2–5, 12, and 13 are unpatentable.” slip op. at 2

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 12, and 13 of the ’608 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 37–39; Ex. 1002 ¶¶ 161–169. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 162– 163. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 37. Patent Owner raised no separate argument regarding the patentability of claims 6 and 8, instead relying solely on its argument that Slater does not anticipate independent claim 1, on which claims 6 and 8 depend. PO Resp. 46; Reply 4 (“Patent Owner does not challenge the combination of Slater and Weaver for claims 6 and 8.”). We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 6 and 8 and find that Petitioner establishes that the combination of Slater and Weaver discloses all of the limitations of claims 6 and 8, and that one of ordinary skill in the art would have been motivated to combine Slater and Weaver for the reasons provided by Petitioner. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 37–39.” slip op. at 19

  Patent outcomesUS 8,529,608 mixed
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 8,529,608
• Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentable
  PTAB · May 4, 2026 · IPR2021-01451 · APJ Sheridan K Snedden · IPR · Remand

  On remand, claims 6, 8, 9, and 13 were held unpatentable; claims 2–5, 11, and 12 were not shown unpatentable because Slater lacks the claimed central axis.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableUnpatentableMixed

    “addressing the ’085 patent and by the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, and 12 of the ’776 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 169–74. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 169– 74. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 17

  • RemandOther

    “Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46, “FWD”) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 10 of U.S. Patent 9,351,776 B2 (“the ’776 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6 and 8, 9 and 11–13 (the “Remanded Claims”) are unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. 14– 15.” slip op. at 2

  Patent outcomesUS 9,351,776 mixed
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 9,351,776
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Apr 29, 2026 · IPR2024-01493 · APJ John D Hamann · IPR · Final written decision

  Claims 1, 3, 5, 7–11, 14, and 15 are unpatentable as obvious; claims 2, 4, 6, 12, and 13 were not shown unpatentable because the references did not establish entirely crystallized CoFeB layers.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In our Decision on Institution, we adopted the definition Petitioner proposes for one having ordinary skill in the art at the time of the invention of the ’167 patent. Dec. on Inst. 6. Namely, we found that one of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Id. (citing Pet. 20 (citing Ex. 1024 ¶ 25)). We also found that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Id. Patent Owner does not address Petitioner’s definition, nor provide its own. See generally PO Resp. Because Petitioner’s definition of the level of skill in the art is consistent with the ’167 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC, 57 F.3d at 1579; In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Here, neither party sets forth any term for claim construction. Pet. 17; see generally PO Resp. Thus, for purposes of this Decision, we afford the claim terms their plain and ordinary meaning. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”)).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In addition, we agree with Petitioner and find that one of ordinary skill in the art “would have been motivated to replace either or both of Bowen’s electrodes with CoFeB to increase TMR and lower Hf [(coupling field)] and Hc [(coercivity)].” Pet. 24, 27; Ex. 1055,30 2270 (“[I]t is natural to replace both the free and pinned layers to CoFeB to further increase the TMR value.”); Ex. 105631 ¶¶ 67–68 (“[B]oth the ferromagnetic layers 5, 7 are made of an FeCoB”32 for “improvement of the TMR ratio.”); Ex. 1024 ¶¶ 129, 132. We credit Dr. Bokor’s cited testimony as it is consistent with the cited evidence. Moreover, as Petitioner explains, “[r]esearchers were . . . interested in optimizing MTJs to improve MRAM performance,” and “[h]igher TMRs long promised improved performance for MRAM.” Pet. 6 30 Dexin Wang et al., 70% TMR at room temperature for SDT sandwich junctions with CoFeB as free and reference layers, 40 IEEE Trans. Magn. 2269–71 (July 2004). 31 US 2004/0136232 A1, published July 15, 2004, to Hosomi. 32 We find persuasive Dr. Bokor’s testimony that “a skilled artisan [would have] understood that CoFeB and FeCoB refer to the same alloy.” Ex. 1024 ¶ 121. 36–44) (emphasis omitted). In addition, we agree with Petitioner that one of ordinary skill in the art “would have found it obvious to use Parkin’s CoFeB layer in place of Bowen’s electrodes to increase TMR” in light of Parkin’s explicit teachings. Pet. 27; Ex. 1024 ¶ 133. In particular, Parkin explicitly teaches that “very high TMR values are unexpectedly found for MTJs with highly textured (100) MgO tunnel barriers but with nominally amorphous storage layers.” Ex. 1062, 18:49–51. Notably, Parkin provides that “[t]he TMR of the device of F[igure] 3A is nearly two times higher than the highest TMR ever reported in prior art devices using conventional alumina tunnel barriers.” Id. at 18:63–65; Pet. 27. And as we discuss above, Parkin teaches that Figure 3A’s MTJ may be inverted, such that the storage layer is formed beneath the tunnel barrier. Ex. 1062, 17:7–10. In addition, we agree that one of ordinary skill in the art would have had a reasonable expectation of success in modifying Bowen in the manner Petitioner proposes, as forming electrodes with CoFeB alloys was known. Pet. 28. As Petitioner argues, “forming electrodes with CoFeB alloys in MTJs was known and had been successfully done,” and thus we are persuaded that “one of skill would have found it to be a straightforward, predictable, and desirable improvement to TMR, Hf, and Hc in Bowen’s” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We find unavailing Patent Owner’s arguments that Bowen teaches a “radically different manufacturing process[] from the claimed invention,” and that Bowen “went to heroic lengths to provide a crystalline (001) bottom electrode that provides a template for epitaxially growing a crystalline MgO(001) layer.” PO Resp. 2 (emphasis omitted). Patent Owner describes in detail Bowen’s specific manufacturing process, including the specific structure of the MTJ manufactured, and argues the claimed invention differs. PO Resp. 30–33. These arguments are inapposite. Petitioner cites the specific teachings Petitioner relies on from Bowen, rather than adopting the entirety of Bowen’s process or MTJ. See, e.g., Pet. 21–36 (citing the portions of Bowen—that in combination with Parkin—teach claim 1). Petitioner is not “compelled to adopt every single aspect of [Bowen’s] teaching without the exercise of independent judgment.” Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). We also find unavailing Patent Owner’s argument that Bowen and Parkin each teach away from Petitioner’s combination because Parkin used boron to avoid crystalline electrodes whereas Bowen tried to achieve perfect crystalline electrodes. PO Resp. 4. As we discuss above, one of ordinary skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB to increase TMR. And Patent Owner does not identify in either reference a specific teaching that criticizes, discredits, or otherwise 35 M. Jimbo et al., Thermal stability of spin valves using amorphous CoFeB, 165 J. Magnetism & Magnetic Materials 308–11 (1997) (“Jimbo”). combination. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004).” slip op. at 23

  Patent outcomesUS 10,680,167 mixed
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,680,167
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Mar 27, 2026 · IPR2024-01447 · APJ Sheila F Mcshane · IPR · Final written decision

  Claims 1–2 are unpatentable as obvious over each Bowen-based combination; claims 3–4 were not shown unpatentable, and the Nagahama-based grounds failed for all claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are 5 Nagahama, EP 1391942 A1, published February 25, 2004 (Ex. 1027, “Nagahama”). made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Consistent with the Institution Decision (Dec. 7), we adopt the assessment offered by Petitioner as it is consistent with the ’134 patent and the asserted prior art. Patent Owner does not dispute that Dr. Bokor is qualified as a person of ordinary skill in the art in accordance with the assessment adopted. See Tr. 90:9–15. Patent Owner, however, questions Dr. Bokor’s knowledge on the formation of crystalline materials and seeks to exclude his related testimony. See PO Resp. 1–2, 27; PO Mot. Excl. 12–15. We address this issue infra Section V.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner “submits the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 24. Patent Owner does not raise any claim construction issues in its Response. See generally PO Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Strike new argumentNew argument consideredDenied

    “A reply may only respond to arguments raised” in the patent owner response. 37 C.F.R § 42.23(b). The Consolidated Trial Practice Guide states that responding “does not mean proceed[ing] in a new direction with a new approach,” and “[w]hile replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered,” that is, “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Consolidated Trial Practice Guide § II.I (last updated Dec. 12, 2025) (“CTPG”), available at https://www.uspto.gov/patents/ptab/trial-practice-guide. We are not persuaded by Patent Owner’s assertions that Petitioner’s reply arguments on Parkin should not be considered. As discussed supra Section II.D.3.i above, the Petition includes the assertion that if Parkin’s CoFeB electrodes were used to modify Bowen, the MgO polycrystalline or single-crystal layer would still have the same 001 orientation. Pet. 33–34 (citing Ex. 1024 ¶ 129; Ex. 1062, 9:58–10:2, 18:49–51; Ex. 1005, 4:30–32). Petitioner’s support in the Petition references disclosures relating to Parkin’s Figure 3A (Ex. 1062, 18:49–51), which discloses a MgO(100) tunnel barrier, and the Petition also notes that the structure of Figure 3A may be inverted. Pet. 40 (citing Ex. 1062, 17:7–10). Patent Owner’s arguments, in large part, are related to Petitioner’s arguments in the Reply relating to Parkin’s Figure 11. Parkin’s Figure 11 is an embodiment where the structure of the devices of Figure 3A is inverted. See Ex. 1062, 22:29–33. We do not find that Petitioner’s arguments that are at issue in the Reply represent a new direction in its approach—the Petition is clearly based on the assertion that if Parkin’s CoFeB electrodes are used in Bowen, the device would have a MgO(001) tunnel barrier layer. Further, the Petition refers to Parkin’s disclosure that the device in Figure 3A may be inverted, which would be encompassed by the Figure 11 embodiment. Moreover, in the Institution Decision, we invited additional briefing on whether Parkin’s storage magnetic electrode was an amorphous ferromagnetic electrode, which relates to Parkin’s Figure 11 (Dec. 28–29). We are also not persuaded by Patent Owner’s argument that the Petition’s assertions do not correspond to what Petitioner argues in the Reply because they were referred to in the section pertaining to limitation 1[e]. The Petition includes a cross-reference in the limitation 1[d] discussion on the tunnel barrier layer limitation: “if Sunai’s or Parkin’s CoFeB electrodes are used as described in Claims 1[e] and 2 in this Ground, one of skill would understand that the MgO . . . would still have the same (001) orientation.” Pet. 33. Further, Petitioner’s arguments in its Reply properly respond to arguments made on contested issues. Patent Owner’s contentions on the merits in its Response are largely based upon the assertion that the modified MTJ of Bowen would not have a MgO(001) layer as claimed. See PO Resp. 4–10, 18–48. Petitioner’s reply arguments on Parkin relate to whether there would be a MgO(001) layer in its structure, so we find that Petitioner’s arguments on Parkin in its Reply (Pet. Reply 2–5) and the related evidence are appropriately responsive. slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We find that there is sufficient evidence in support of Petitioner’s assertion of the rationale to replace Bowen’s electrodes with CoFeB and anneal them. As discussed supra Section II.D.ii.2, Parkin’s Figure 11 depicts and describes a storage electrode that may be composed of amorphous CoFeB, with the formation of a MgO(001) barrier layer atop it. See Ex. 1062, 22:29–66. Patent Owner argues that Parkin’s benefits are because its CoFeB electrode is amorphous (PO Resp. 51–52), but this is not accurate. In Parkin, the CoFeB amorphous electrode crystallized at the interface layer between the barrier and the electrode. Id. at 19:6–19. Parkin discloses that higher TMRs were attributable to the crystallization of CoFeB. Id. at 18:63–19:22. Parkin also discloses that its completed CoFeB- MgOH(001)-CoFeB device was annealed with resulting high TMRs. Id. at 17:60–18:16. These disclosures provide support that one of skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB and anneal to crystallize them because of the known improvements of TMR. Additionally, Parkin’s disclosures support that the results of the combination would have been predictable. That is, Parkin actually discloses an amorphous CoFeB electrode, formation of a MgO(001) tunnel barrier on the amorphous electrode, and annealing the assembly, with a resulting high TMR. Accordingly, Petitioner has provided reasoning with rationale underpinning for the motivation to combine. See KSR, 550 U.S. at 415 (“[t]he combination of familiar elements according to known methods is likely to be obvious when it does no more than yield predictable results”).” slip op. at 31

  Patent outcomesUS 8,405,134 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,405,134

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.