• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Apr 29, 2026 · IPR2024-01493 · APJ John D Hamann · IPR · Final written decision

  Claims 1, 3, 5, 7–11, 14, and 15 are unpatentable as obvious; claims 2, 4, 6, 12, and 13 were not shown unpatentable because the references did not establish entirely crystallized CoFeB layers.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In our Decision on Institution, we adopted the definition Petitioner proposes for one having ordinary skill in the art at the time of the invention of the ’167 patent. Dec. on Inst. 6. Namely, we found that one of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Id. (citing Pet. 20 (citing Ex. 1024 ¶ 25)). We also found that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Id. Patent Owner does not address Petitioner’s definition, nor provide its own. See generally PO Resp. Because Petitioner’s definition of the level of skill in the art is consistent with the ’167 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC, 57 F.3d at 1579; In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Here, neither party sets forth any term for claim construction. Pet. 17; see generally PO Resp. Thus, for purposes of this Decision, we afford the claim terms their plain and ordinary meaning. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”)).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In addition, we agree with Petitioner and find that one of ordinary skill in the art “would have been motivated to replace either or both of Bowen’s electrodes with CoFeB to increase TMR and lower Hf [(coupling field)] and Hc [(coercivity)].” Pet. 24, 27; Ex. 1055,30 2270 (“[I]t is natural to replace both the free and pinned layers to CoFeB to further increase the TMR value.”); Ex. 105631 ¶¶ 67–68 (“[B]oth the ferromagnetic layers 5, 7 are made of an FeCoB”32 for “improvement of the TMR ratio.”); Ex. 1024 ¶¶ 129, 132. We credit Dr. Bokor’s cited testimony as it is consistent with the cited evidence. Moreover, as Petitioner explains, “[r]esearchers were . . . interested in optimizing MTJs to improve MRAM performance,” and “[h]igher TMRs long promised improved performance for MRAM.” Pet. 6 30 Dexin Wang et al., 70% TMR at room temperature for SDT sandwich junctions with CoFeB as free and reference layers, 40 IEEE Trans. Magn. 2269–71 (July 2004). 31 US 2004/0136232 A1, published July 15, 2004, to Hosomi. 32 We find persuasive Dr. Bokor’s testimony that “a skilled artisan [would have] understood that CoFeB and FeCoB refer to the same alloy.” Ex. 1024 ¶ 121. 36–44) (emphasis omitted). In addition, we agree with Petitioner that one of ordinary skill in the art “would have found it obvious to use Parkin’s CoFeB layer in place of Bowen’s electrodes to increase TMR” in light of Parkin’s explicit teachings. Pet. 27; Ex. 1024 ¶ 133. In particular, Parkin explicitly teaches that “very high TMR values are unexpectedly found for MTJs with highly textured (100) MgO tunnel barriers but with nominally amorphous storage layers.” Ex. 1062, 18:49–51. Notably, Parkin provides that “[t]he TMR of the device of F[igure] 3A is nearly two times higher than the highest TMR ever reported in prior art devices using conventional alumina tunnel barriers.” Id. at 18:63–65; Pet. 27. And as we discuss above, Parkin teaches that Figure 3A’s MTJ may be inverted, such that the storage layer is formed beneath the tunnel barrier. Ex. 1062, 17:7–10. In addition, we agree that one of ordinary skill in the art would have had a reasonable expectation of success in modifying Bowen in the manner Petitioner proposes, as forming electrodes with CoFeB alloys was known. Pet. 28. As Petitioner argues, “forming electrodes with CoFeB alloys in MTJs was known and had been successfully done,” and thus we are persuaded that “one of skill would have found it to be a straightforward, predictable, and desirable improvement to TMR, Hf, and Hc in Bowen’s” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We find unavailing Patent Owner’s arguments that Bowen teaches a “radically different manufacturing process[] from the claimed invention,” and that Bowen “went to heroic lengths to provide a crystalline (001) bottom electrode that provides a template for epitaxially growing a crystalline MgO(001) layer.” PO Resp. 2 (emphasis omitted). Patent Owner describes in detail Bowen’s specific manufacturing process, including the specific structure of the MTJ manufactured, and argues the claimed invention differs. PO Resp. 30–33. These arguments are inapposite. Petitioner cites the specific teachings Petitioner relies on from Bowen, rather than adopting the entirety of Bowen’s process or MTJ. See, e.g., Pet. 21–36 (citing the portions of Bowen—that in combination with Parkin—teach claim 1). Petitioner is not “compelled to adopt every single aspect of [Bowen’s] teaching without the exercise of independent judgment.” Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). We also find unavailing Patent Owner’s argument that Bowen and Parkin each teach away from Petitioner’s combination because Parkin used boron to avoid crystalline electrodes whereas Bowen tried to achieve perfect crystalline electrodes. PO Resp. 4. As we discuss above, one of ordinary skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB to increase TMR. And Patent Owner does not identify in either reference a specific teaching that criticizes, discredits, or otherwise 35 M. Jimbo et al., Thermal stability of spin valves using amorphous CoFeB, 165 J. Magnetism & Magnetic Materials 308–11 (1997) (“Jimbo”). combination. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004).” slip op. at 23

  Patent outcomesUS 10,680,167 mixed
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,680,167
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Mar 27, 2026 · IPR2024-01447 · APJ Sheila F Mcshane · IPR · Final written decision

  Claims 1–2 are unpatentable as obvious over each Bowen-based combination; claims 3–4 were not shown unpatentable, and the Nagahama-based grounds failed for all claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are 5 Nagahama, EP 1391942 A1, published February 25, 2004 (Ex. 1027, “Nagahama”). made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Consistent with the Institution Decision (Dec. 7), we adopt the assessment offered by Petitioner as it is consistent with the ’134 patent and the asserted prior art. Patent Owner does not dispute that Dr. Bokor is qualified as a person of ordinary skill in the art in accordance with the assessment adopted. See Tr. 90:9–15. Patent Owner, however, questions Dr. Bokor’s knowledge on the formation of crystalline materials and seeks to exclude his related testimony. See PO Resp. 1–2, 27; PO Mot. Excl. 12–15. We address this issue infra Section V.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner “submits the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 24. Patent Owner does not raise any claim construction issues in its Response. See generally PO Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Strike new argumentNew argument consideredDenied

    “A reply may only respond to arguments raised” in the patent owner response. 37 C.F.R § 42.23(b). The Consolidated Trial Practice Guide states that responding “does not mean proceed[ing] in a new direction with a new approach,” and “[w]hile replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered,” that is, “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Consolidated Trial Practice Guide § II.I (last updated Dec. 12, 2025) (“CTPG”), available at https://www.uspto.gov/patents/ptab/trial-practice-guide. We are not persuaded by Patent Owner’s assertions that Petitioner’s reply arguments on Parkin should not be considered. As discussed supra Section II.D.3.i above, the Petition includes the assertion that if Parkin’s CoFeB electrodes were used to modify Bowen, the MgO polycrystalline or single-crystal layer would still have the same 001 orientation. Pet. 33–34 (citing Ex. 1024 ¶ 129; Ex. 1062, 9:58–10:2, 18:49–51; Ex. 1005, 4:30–32). Petitioner’s support in the Petition references disclosures relating to Parkin’s Figure 3A (Ex. 1062, 18:49–51), which discloses a MgO(100) tunnel barrier, and the Petition also notes that the structure of Figure 3A may be inverted. Pet. 40 (citing Ex. 1062, 17:7–10). Patent Owner’s arguments, in large part, are related to Petitioner’s arguments in the Reply relating to Parkin’s Figure 11. Parkin’s Figure 11 is an embodiment where the structure of the devices of Figure 3A is inverted. See Ex. 1062, 22:29–33. We do not find that Petitioner’s arguments that are at issue in the Reply represent a new direction in its approach—the Petition is clearly based on the assertion that if Parkin’s CoFeB electrodes are used in Bowen, the device would have a MgO(001) tunnel barrier layer. Further, the Petition refers to Parkin’s disclosure that the device in Figure 3A may be inverted, which would be encompassed by the Figure 11 embodiment. Moreover, in the Institution Decision, we invited additional briefing on whether Parkin’s storage magnetic electrode was an amorphous ferromagnetic electrode, which relates to Parkin’s Figure 11 (Dec. 28–29). We are also not persuaded by Patent Owner’s argument that the Petition’s assertions do not correspond to what Petitioner argues in the Reply because they were referred to in the section pertaining to limitation 1[e]. The Petition includes a cross-reference in the limitation 1[d] discussion on the tunnel barrier layer limitation: “if Sunai’s or Parkin’s CoFeB electrodes are used as described in Claims 1[e] and 2 in this Ground, one of skill would understand that the MgO . . . would still have the same (001) orientation.” Pet. 33. Further, Petitioner’s arguments in its Reply properly respond to arguments made on contested issues. Patent Owner’s contentions on the merits in its Response are largely based upon the assertion that the modified MTJ of Bowen would not have a MgO(001) layer as claimed. See PO Resp. 4–10, 18–48. Petitioner’s reply arguments on Parkin relate to whether there would be a MgO(001) layer in its structure, so we find that Petitioner’s arguments on Parkin in its Reply (Pet. Reply 2–5) and the related evidence are appropriately responsive. slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We find that there is sufficient evidence in support of Petitioner’s assertion of the rationale to replace Bowen’s electrodes with CoFeB and anneal them. As discussed supra Section II.D.ii.2, Parkin’s Figure 11 depicts and describes a storage electrode that may be composed of amorphous CoFeB, with the formation of a MgO(001) barrier layer atop it. See Ex. 1062, 22:29–66. Patent Owner argues that Parkin’s benefits are because its CoFeB electrode is amorphous (PO Resp. 51–52), but this is not accurate. In Parkin, the CoFeB amorphous electrode crystallized at the interface layer between the barrier and the electrode. Id. at 19:6–19. Parkin discloses that higher TMRs were attributable to the crystallization of CoFeB. Id. at 18:63–19:22. Parkin also discloses that its completed CoFeB- MgOH(001)-CoFeB device was annealed with resulting high TMRs. Id. at 17:60–18:16. These disclosures provide support that one of skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB and anneal to crystallize them because of the known improvements of TMR. Additionally, Parkin’s disclosures support that the results of the combination would have been predictable. That is, Parkin actually discloses an amorphous CoFeB electrode, formation of a MgO(001) tunnel barrier on the amorphous electrode, and annealing the assembly, with a resulting high TMR. Accordingly, Petitioner has provided reasoning with rationale underpinning for the motivation to combine. See KSR, 550 U.S. at 415 (“[t]he combination of familiar elements according to known methods is likely to be obvious when it does no more than yield predictable results”).” slip op. at 31

  Patent outcomesUS 8,405,134 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,405,134
• Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.Some claims unpatentable
  PTAB · Feb 24, 2026 · IPR2024-01203 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 1–11 are unpatentable as obvious; claim 12 was not shown unpatentable because the evidence did not establish that Froitzheim’s silver contact was formed over silicon dioxide.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art would have had (i) an advanced degree in electrical engineering, mechanical engineering, applied physics, chemistry, materials science, or a related discipline and (ii) at least one year of experience 7 Neither Petitioner nor Patent Owner raises issues of objective indicia of nonobviousness. designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Alternatively, a POSITA [i.e., a person of ordinary skill in the art] would have had (i) a bachelor’s degree in the aforementioned disciplines and (ii) at least two years of experience designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Less work experience may be compensated by a higher level of education, and vice versa.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We are persuaded that Petitioner has shown a reasonable expectation of success in the combination of Froitzheim and Gan. Petitioner explains that the combination of Froitzheim and Gan simply replaces one emitter, i.e., Froitzheim’s diffused emitter, with the polysilicon emitter of Gan. Pet. 36. According to Petitioner, a person of ordinary skill in the art would have also readily understood how to replace a diffused emitter with a polysilicon emitter and oxide layer [and] would have understood that instead of diffusing boron into the substrate’s back side as taught by Froitzheim, a [person of ordinary skill in the art] would instead follow the manufacturing technique taught by Gan. Pet. 37 (citing Ex. 1005, 246). Petitioner explains that the Gan processes are well-known and routine, and Dr. Holman states that “modifying Froitzheim in view of Gan simply involves using Gan’s known technique of a polysilicon emitter and oxide layer with Froitzheim’s known solar cell to improve Froitzheim’s solar cell in a similar way.” Pet. 37 (citing Ex. 1003 ¶ 144). For example, Petitioner directs our attention to “multiple instances” in which oxide layers and polysilicon emitters have been implemented successfully in the art. Pet. 37 (citing Ex. 1005, 246; Ex. 1006 ¶ 22; Ex. 1046, Abstr., 1121; Ex. 1003 ¶ 145). Furthermore, Gan’s statement that “cell performance can be improved if the diffused-emitter is replaced with the polysilicon emitter” and “polysilicon emitters with low J0 and ρc can be obtained with a very small fraction of interfacial oxide breakup” indicate a reasonable expectation of success. Ex. 1005, 245, 249. Gan also states that “polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells.” Ex. 1005, 249. Thus, we are persuaded that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Froitzheim and Gan.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We are not persuaded the record evidence rises to the level of a teaching away. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). And “teaching away” requires more than the mere expression of a general preference.” Galderma Labs., L.P., v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013). Notably, our reviewing court has determined that a reference can distinguish prior art in order to show the novelty of an invention without teaching away from combining the prior art with the invention disclosed in the reference. See Ricoh Co. v. Quanta Computer Inc., 550 F.3d 1325, 1332 (Fed. Cir. 2008). Here, Li prefers a “heterogeneous PN junction” and states that “a PN junction is prepared by a low-temperature deposition method, which avoids a conventional diffusion process at 800–1000°C. Such high-temperature process will cause more defects or contamination in silicon material, which will affect the improvement of cell efficiency.” Ex. 1008, 4. But, Li’s preference for lower temperature diffusion processes does not amount to a teaching away from the broader disclosure. In fact, Li acknowledges that “[t]he silicon thin film can be prepared by any deposition method,” including conventional processes at higher temperatures. Ex. 1008, 4 (emphasis added). And, while Patent Owner asserts that “[d]eposition methods are not relevant to the parties’ dispute, which is over deposition temperature” (Sur-reply 17), the deposition method employed includes its deposition temperature. See Ex. 1008, 4 (Li describing “conventional” diffusion processes at temperatures of 800–1000° C). Thus, just because Li teaches one way of depositing its silicon thin film using a low-temperature deposition method does not mean that Li teaches away from high-temperature processes. Li’s teachings do not discredit or discourage high-temperature processes in a manner that may be said to teach away.” slip op. at 51

  Patent outcomesUS 8,222,516 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,222,516
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15

  Patent outcomesUS 8,558,223 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,558,223
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision

  Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for petitioner

    “In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62

  Patent outcomesUS 11,336,832 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,336,832
• Apple Inc. v. Theta IP, LLCSome claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-00819 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over Behbahani, Leete, and Tan; claim 20 was not shown unpatentable because the references did not teach its required comparison of desired and interferer signal strengths.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Petitioner thus proposes a Master’s degree with two years of experience, while Patent Owner proposes a Bachelor’s degree with five years of experience. At the institution stage, we did not see a material difference in the proposals given that both parties also indicate that more education could substitute for less experience and vice versa, and thus adopted Patent Owner’s proposal. Inst. Dec. 9. We requested that the parties address during trial if either believed that the choice of one proposal over the other would make a difference in the patentability analysis. Id. Neither party has done so. Accordingly, because nothing in the record persuades us that our preliminary finding in the Institution Decision was incorrect, and because neither party has challenged our finding, we maintain our adoption of Patent Owner’s proposed level of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “Here, as in the Director’s example, Petitioner advanced a narrower construction of the dynamic limitations before the district court, which the district court declined to adopt. Pet. 9; Ex. 2015; Ex. 2025, 31–47. Instead, the district court adopted a “plain-and-ordinary meaning” construction, which Patent Owner proposed. PO Resp. 38; PO Sur-reply 10 n.2; Ex. 2015; Ex. 2025, 31–47. In the Petition, Petitioner proposed applying the plain and ordinary meaning construction that had already been preliminarily adopted by the district court. Compare Pet. (filed May 1, 2024) with Ex. 2015 (preliminarily adopting plain and ordinary meaning construction on March 25, 2024). Applying Revvo, we find that Petitioner had a sufficient reason for advancing the broader, court-adopted construction in this IPR. Thus, we give the dynamic limitation its plain-and-ordinary meaning, which is “adjusting during operation based—at least in part—on information gained during operation.”” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for patent owner

    “In our Institution Decision, we stated that we “will give the term ‘signal path’ its ‘plain and ordinary meaning’ and not limit it only to analog components, as the district court found and the parties agree.” Inst. Dec. 11. Given that the parties continue to agree on this point, we see no need to depart from the construction we adopted in our Institution Decision. Moreover, applying Revvo, we find that Petitioner had a sufficient reason for advancing the broader, court-adopted construction in this IPR for the same reasons as discussed above. In this proceeding, the dispute between the parties concerns the application of this and the surrounding claim language (i.e., “in the receiver signal path,” “in the signal path”) to the disclosures in Behbahani. See PO Resp. 43–45. Therefore, we will provide further discussion in the context of the parties’ arguments regarding Behbahani below. However, we agree with Patent Owner’s plain reading of the claim language to the extent it requires adjusting an impedance and/or bias current of a circuit while it is in the signal path. See Id. at 50–51.” slip op. at 14

  • Expert testimonyPatent owner expert discountedOther

    “Patent Owner’s arguments generally fail to address why Behbahani’s Variable Bandpass Filter Block does not teach the recited “plurality of circuits [comprising/including] . . . a filter,” and instead focus on why the low-pass and high-pass filter circuits do not teach the limitation, which is not Petitioner’s position. As stated above, we agree with Patent Owner’s plain reading of the claim language – i.e., that it “requires adjusting the bias, in or of a circuit.” See PO Resp. 49. However, Patent Owner’s reading of the claim does not persuasively address why the Variable Bandpass Filter Block does not teach the recited “circuit.” We have reviewed Dr. Larson’s cited testimony and disagree with Patent Owner that he provided “a well-supported opinion . . . as to why a [person of ordinary skill in the art] would not understand the entire bandpass box to be a single ‘circuit,’ or to reflect variation in ‘an impedance’ or ‘a bias’ in the claims.” Sur-reply 4 (citing Ex. 2020 ¶¶ 46–48, 71, 74–83). Dr. Larson testifies that the ’330 patent (which has the same specification as the ’164 patent) “teach[es] these adjustments [that dynamically change operating parameters] as changes effected in a single circuit block.” Ex. 2020 ¶ 46 (citing, e.g., Ex. 1001, Figs. 8A, 9A, 8:20–25, 8:36–39, 9:36–59, 10:1–18 (emphasis added)). Dr. Larson does not provide further explanation as to what he means by a “single circuit block,” but relies on Figures 8A and 9A, which show a “function block,” and other disclosures referring to a “function block.” See id. There is no dispute that the recited “circuit” in the receiver signal path is referring to these “function blocks.” See Tr. 22:20–23:4. The ’164 patent states that Figure 8A, which includes function block 820, is “an embodiment of the present invention” 8:28–30. Similarly, Figure 9A, which includes function block 920, “illustrate[s] one of the possible power saving techniques.” Id. at 3:41–42. The ’164 patent describes that “[f]unctional block 820 . . . may be a filter, mixer, amplifier, or other circuit or circuits in a wireless transceiver or other electronic circuits or system.” Id. at 8:30–33 (emphasis added). Based on these disclosures, we are not convinced that Function Block 820 or 920 cannot include multiple filters in a Variable Bandpass Filter Block, or that Behbahani’s Variable Bandpass Filter Block does not teach the recited “circuit.” Dr. Larson also relies on Figure 6 of the ’164 patent to conclude that” slip op. at 45

  Patent outcomesUS 11,564,164 mixed
  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,564,164
• Google LLC v. Eyesmatch Ltd.Some claims unpatentable
  PTAB · Nov 21, 2025 · IPR2025-00296 · APJ Neil T Powell · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “December 18, 2012, would have a bachelor’s degree in electrical or computer engineering, or a closely related field such as computer science, and two years of work experience with image capture and processing systems or related fields.” Pet. 7 (citing Karam Decl. ¶ 91). Petitioner adds that “[a] person with less and/or different education, but more relevant practical experience, or vice versa, may also meet this standard.” Id. According to Petitioner, [t]he prior art also evidences such level of skill.” Id. Patent Owner states that it “applies Petitioners’ proposed level of skill for purposes of this Response.” PO Resp. 9 (citing Forsyth Decl. ¶¶ 53–54). For this Decision, we adopt the formulation of the level of ordinary skill in the art proposed by Petitioner and applied by Patent Owner as consistent with the prior art before us in this proceeding.10” slip op. at 9

  • Prior constructionPrior construction adoptedDecided for patent owner

    “Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Post-institution, Patent Owner invites us to construe limitation 1[f]’s recitation of “mirror tracking mode” and limitation 1[c]’s recitation of “adaptive transformation mapping.” PO Resp. 9–14. Regarding the latter, Patent Owner explains that “[i]n the District Court Litigation, ‘adaptive transformation mapping’ was construed as ‘continuously variable transformation mapping’ and ‘transformation mapping’ was construed as a ‘selected set of image transformations.’” Id. at 14 (citing Ex. 2008, 14, 37; Ex. 2013 ¶¶ 25, 27). Patent Owner does not, however, identify any way that those claim constructions affect our analysis of the parties’ patentability disputes. We find it unnecessary in resolving the parties’ patentability disputes to construe expressly limitation 1[c]’s recitation of “adaptive transformation mapping.”” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4.” slip op. at 23

  Patent outcomesUS 8,982,110 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 8,982,110
• Bizlink Technology, Inc. v. Anderson Power Products, Inc.Some claims unpatentable
  PTAB · Nov 7, 2025 · IPR2024-00687 · APJ Lisa L Tsang · IPR · Final written decision

  Claims 1–3 and 7–12 are unpatentable; claim 4 is not shown unpatentable because Winkler does not establish that its insulating barriers press against each other when partially disconnected.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “We agree with Patent Owner’s first argument that a level of ordinary skill in the art that encompasses an individual having experience with electrical circuits but not electrical connectors is not consistent with the technology and descriptions in the ’017 patent. See PO Resp. 7. The field of the invention of the ’017 patent is “electrical connectors, and more particularly, . . . an electrical connector that suppresses arcing if connected or disconnected while current is flowing.” Ex. 1001, 1:7–9. Consistent therewith, the challenged claims are directed to “[a]n electrical connector pair” and recite structural features of the electrical connector pair. Id. at 4:20–56, 5:1–20.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We find that the intrinsic evidence supports maintaining our construction in the Institution Decision that “insulating” means “electrically insulating.” See Dec. 11–12. In particular, we agree with Patent Owner’s argument that the insulating barriers would be unable to be configured to “block[] substantially all through-air arcing paths between the first and second electrical contacts,” as claimed, unless they were electrically insulating. See Ex. 1001, 4:36–44. Moreover, as Patent Owner avers, our interpretation of “insulating” as it applies to the first and second insulating barriers should be the same as for the first and second housings. See Digital Biometrics, 149 F.3d at 1345 (“whatever interpretation we assign [to a word used in a claim] should encompass both uses because the same word appearing in the same claim should be interpreted consistently” (citation omitted)).” slip op. at 15

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Ex. 2001 ¶ 102. Accordingly, we find Dr. Eldering’s testimony persuasive as to this issue and determine that the diagram shows what an ordinarily skilled artisan would have reasonably inferred Winkler to disclose when the connectors are partially disconnected. Compare Ex. 1004, Fig. 2, with Pet. 33; see also Ex. 1004, 3:14–27 (discussing the process by which the connectors are engaged with each other).” slip op. at 44

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Id. at 3:27–37 (emphasis added). These wall portions 58 are located between the distal ends of the terminals and where Petitioner proposes to add a printed circuit board or wiring board to Winkler. See id. at Fig. 2; Pet. 44–46 (diagrams showing Winkler as modified to have a printed circuit board or wiring board). As such, movement of Winkler’s terminals appears to be mostly limited to within their respective receiving pockets. Given the above teachings, we fail to see how Petitioner’s proposed modification would have meaningfully interfered with the degree of freedom of movement required by Winkler’s terminals. Notably, Mr. Locati’s testimony regarding this issue is conclusory. See Ex. 2001 ¶ 120. Because movement of Winkler’s terminals occurs primarily in the receiving pockets, we also do not discern how the solder joint of Petitioner’s proposed modification would experience undue stress or risk breaking due to that movement. See Ex. 1004, 1:47–55, 3:14–37, Fig. 2; Pet. 44–46. This is particularly true in view of Winkler’s teaching that each cylindrical end portion may be soldered to a cable. See id. at 2:6–10; see also Pet. 43 (arguing that Winkler teaches soldering to a cable but not specifically to a printed circuit or wiring board). Accordingly, we determine that Petitioner has shown by a preponderance of the evidence that claim 8 would have been obvious over the combined teachings of Winkler and Handbook.” slip op. at 55

  Patent outcomesUS 8,808,017 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,808,017
• Tesla, Inc. v. Autonomous Devices, LLCSome claims unpatentable
  PTAB · Oct 21, 2025 · IPR2024-00745 · APJ Russell E Cass · IPR · Final written decision

  Claims 45–47, 51, 59, 60, 68, and 69 are unpatentable; claims 56 and 57 are not shown unpatentable. Substitute claims 85–88 and 91 are unpatentable; amendment is granted for claims 92 and 93.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “technical field, and the asserted prior art, we agree with Petitioner’s proposed qualifications for the person of ordinary skill in the art, except we decline to adopt “at least,” as that language is vague and open-ended. Otherwise, Petitioner’s proposed definition is consistent with the level of 3 Patent Owner does not present objective evidence of nonobviousness. skill reflected in the specification of the ’474 patent and the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Accordingly, we adopt Petitioner’s assessment of the level of skill for one of ordinary skill in the art.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner states that “no formal constructions are presently necessary,” and that it “maps [the] prior art in this Petition in a manner consistent with Patent Owner’s allegations of infringement before the district court.” Pet. 8 (citing Ex. 1017; Ex. 1003 ¶¶ 21–25). Patent Owner states that it believes there is no need to construe any terms of the challenged original claims because there is no underlying controversy regarding any claim terms. PO Resp. 10. For purposes of this Decision, we determine that it is not necessary to provide an express construction of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”).” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “3. Motivation to Combine Buibas and Sinyavskiy Petitioner argues that “it would have been obvious to partition Buibas’[s] spiking networks according to the specific techniques disclosed in Sinyavskiy” for multiple reasons. Pet. 13 (citing Ex. 1005 ¶¶ 71–72, 85, 92, 179–203; Ex. 1006 ¶¶ 12, 185, 188, 191, Fig. 6A; Ex. 1003 ¶ 63). First, Petitioner asserts, one of ordinary skill “would have been motivated to partition Buibas’[s] spiking neural network as suggested by Sinyavskiy to parallelize task execution on the robot and improve learning capabilities (e.g., through faster learning, greater computing efficiency, and task-specific learning models) of the Buibas mobile robotic apparatus as described by Sinyavskiy and discussed by Dr. Janet.” Id. (citing Ex. 1003 ¶ 64). Second, Petitioner contends, “partitioning Buibas’[s] robotic brain as suggested by Sinyavskiy would have beneficially expanded the range of tasks that the robot could perform by dedicating partitions to specialized tasks.” Id. at 13– 14 (citing Ex. 1006 ¶¶ 12, 185, 188, Fig. 6A; Ex. 1005 ¶¶ 71–72, 85, 92, 179–205; Ex. 1003 ¶ 65). Third, Petitioner argues, one of ordinary skill “would have been motivated to partition Buibas’[s] spiking neural network as suggested by Sinyavskiy to permit unused partitions or unused resources in the partitions to be reassigned for different tasks,” which would allow for a network processing apparatus that has increased processing capability for the same network capacity while also having a lower cost, size and power consumption. Id. at 14 (citing Ex. 1006 ¶¶ 190–192, 105, 34, code (57); Ex. 1003 ¶ 66). Fourth, Petitioner argues that “Buibas briefly mentions that its spiking neural networks can be partitioned but discloses little detail about the partitioning,” which would invite one of ordinary skill to turn to other references, such as Sinyavskiy, for additional detail on how to implement partitioning. Pet. 14–15 (citing Ex. 1005 ¶ 92; Ex. 1003 ¶ 67). Fifth, Petitioner asserts, combining Buibas and Sinyavskiy would merely “involve[] the application of known techniques (e.g., Sinyavskiy’s partitioned neural network) to a known system (e.g., Buibas’[s] mobile robot and robotic brain) to yield predictable results (e.g., Buibas’[s] robot using a spiking neural network partitioned as taught in Sinyavskiy),” particularly because “the partitioning of the Buibas neural network is reminiscent of Recurrent Fuzzy Neural Networks (RFNNs) that were already commonplace at the end of the 1990’s.” Id. at 15 (citing Ex. 1003 ¶ 68). Finally, Petitioner contends, the proposed combination merely involves “use of known techniques (e.g., Sinyavskiy’s partitioned neural network) to improve a similar system (e.g., Buibas’[s] mobile robot and robotic brain).” Id. (citing Ex. 1003 ¶ 69). Petitioner further argues that one of ordinary skill “would have reasonably expected success implementing the combination, especially as Buibas and Sinyavskiy describe highly similar systems involving spiking neural networks used for training/operating robots.” Pet. 15–16 (citing Ex. 1005 ¶ 92; Ex. 1003 ¶ 70). Indeed, Petitioner contends, “Buibas itself confirms that its spiking neural network can be partitioned, while Sinyavskiy provides the details for doing so.” Id. at 16 (citing Ex. 1005 ¶ 92; Ex. 1003 ¶ 70).” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “We agree with Patent Owner and Dr. Saber that these “weights” are numerical values associated with connections among neurons, and the “weight vectors” are merely lists of weights. PO Resp. 13–14; Ex. 2001 ¶¶ 66–67. When input is provided to the neural network, the network uses the weights of its connections in a feedforward calculation manner to provide an output that can include an instruction for operating a device. Ex. 2001 ¶ 66. We agree with and find credible Dr. Saber’s testimony that Buibas’s merging of weights or weight vectors results in updated network weights, and does not, by itself, disclose the merging of instruction sets for operating a device, or the correlation of the same set of inputs for all or a portion of a circumstance representation with instruction sets for operating two different devices. Ex. 2001 ¶¶ 65, 67, 69–71.” slip op. at 39

  Patent outcomesUS 11,663,474 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,663,474

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.