- Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00186 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board found the combination disclosed the claimed isolation portion and supported the challenged claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id. Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed
“edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00007 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under §103 over Chang and Jin because the combination teaches the claimed isolation portion and the claimed tapering.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightTeaching away not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide.” slip op. at 18
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Bio-Rad Laboratories, Inc. v. California Institute Of TechnologyNo claims unpatentablePTAB · Mar 23, 2026 · IPR2024-01451 · APJ Tawen Chang · IPR · Final written decision
Claims 1–19 were not shown unpatentable: Larson did not establish the claimed detection in a single sample volume, and the asserted obviousness combinations did not cure the deficiencies.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner states that, “[f]or purposes of this IPR proceeding, PO does not contest Petitioner’s description of qualifications for a person of ordinary skill in the art (POSA) set forth [above].” PO Resp. 23. In view of the above, and because Petitioner’s uncontested description of one of ordinary skill in the art is reasonable and consistent with the ’921 patent and the cited art, we adopt Petitioner’s definition of a POSA for purposes of this Decision, except that we replace the phrase “at least a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection” with “around a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection.” Pet. 9 (emphasis added).13” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We begin with “the context in which a term is used in the asserted claim,” which can be “highly instructive.” Phillips, 415 F.3d at 1314. In this case, claim 1 recites that the claimed assay is “capable of unambiguously detecting the presence or absence of each of said at least M analytes, in any combination of presence or absence, in a single sample volume, . . . wherein the analytes are amplified in the single sample 15 In this regard, we note that Petitioner’s claim construction position is not predicated on the collection of droplets being reconstituted into its original, pre-partition form prior to amplification; rather, the droplets remain compartmentalized from each other in the PCR thermal cycling tube. Tr. 65:21–66:9 (Petitioner’s counsel explaining that the droplets do not combine in the PCR thermal cycling tube but, rather, are “suspended in an immiscible fluid and analyzed en masse”). indicates that the first instance of single sample volume, i.e., the single sample volume in which the presence or absence of each M analytes are to be detected, is the antecedent basis for the second instance of “single sample volume,” i.e., the single sample volume in which the analytes are amplified. Thus, as the parties appear to agree, the single sample volume in which amplification takes places must be the same single sample volume in which the presence or absence of analytes are to be detected. We are not persuaded that, when accorded its plain and ordinary meaning, a single sample volume divided into a collection of droplets would be considered the “same” single sample volume prior to its partition.” slip op. at 17
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“With respect to the limitation, “wherein the analytes are amplified in the single sample volume,” Petitioner asserts that “Larson discloses PCR assays that amplify target polynucleotide in a single sample volume, specifically a portion of the reaction mixture that is subsequently partitioned into droplets.” Pet. 31 (emphasis added). There is no dispute that the amplification of the analytes in Larson occurs in the droplets. Larson ¶¶ 6–7 (explaining that “[d]igital PCR (dPCR) is an alternative quantitation method in which dilute sample are divided into many separate reactions” and that “[t]he template is amplified in the droplet for detection”) (emphasis added). Because the claims require that amplification of the analytes be in the same sample volume in which the at least M analytes, in any combination of presence or absence, is unambiguously detected, and because the pre-partition single sample volume is not the same single sample volume as the collection of droplets after partition under our claim construction set forth above, we find Petitioner has not shown, by a preponderance of evidence, that claims 1–10 and 13–19 are anticipated by Larson.17 Tr. 68:12–69:14 (Petitioner’s counsel” slip op. at 27
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Although we agree with Petitioner that Larson contemplates scenarios in which droplets may contain more than one target molecule and does not require the exclusion of such multiple occupancy droplets in all embodiments, we are nevertheless not persuaded Petitioner has shown, based on a preponderance of evidence, that Larson renders obvious an assay capable of unambiguously detecting, in such multiple occupancy droplets, the presence or absence of each of at least M analytes, in any combination of presence or absence, when M is greater than F and F is at least 2.” slip op. at 32
Patent outcomesUS 11,827,921 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,827,921 - SAP America, Inc. v. Cyandia, Inc.All claims unpatentablePTAB · Mar 13, 2026 · IPR2024-01433 · APJ Jeffrey S Smith · IPR · Final written decision
Claims 1–7, 10, 11, 13, 18, 19, 23, 29, 35, and 36 are unpatentable as obvious over the PCT Publication and Austin-Lane.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner asserts that a person of ordinary skill in the art at the time of filing “would have had a Bachelor’s degree in electrical engineering, computer science, or the like, and/or four or more years of experience in server-based applications” and that “[a]dditional experience may make up for a lack of education and vice versa.” PO Resp. 9. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the challenged patent and prior art, we adopt it and use “skilled artisans” to refer to people with such skill at the time the invention was filed. We do not perceive a substantive distinction between the parties’ definitions, but note that Petitioner’s definition provides more detail about the capabilities of skilled artisans. Also, the level of ordinary skill in the art can be evidenced by the references cited, and we find it commensurate with the cited references in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“device indicated by the session data” encompasses “determining a notification method based on” session data indicating the current state of the external device, where the current state of the device encompasses an online state as well as an offline state. See Pet. 53–54; Tr. 55:3–10 (The Board: “Are there any other states of an external device other than online or offline?” Patent Owner: “As far as I know, Your Honor, those are the only two[.]”), Tr. 65:24–66:1 (The Board: “When the claim says current state, they mean it’s online or offline?” Petitioner: “Correct.”), Tr. 20:23–21:8. The specification is consistent with the plain language of the claim in disclosing two examples of the claimed “current state,” namely, online and offline. Ex. 1101, 21:1–4. The specification discloses that the notification manager “queries session manager 456 to determine the user’s connectedness.” Id. at 21:6–8. The specification discloses that if the user is “online, notify by, for example, the user’s active session. If offline, notify by, for example, a txt [sic] message, call the user’s landline, call a friend of the user, and the like.” Id. at 21:1–4, 23:28–31.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Patent Owner’s expert witness, Dr. Goodrich, show written description support for providing a notification to an active external device, Patent Owner has not cited any portion of the 2009 Parent, nor any portion of the testimony of Dr. Goodrich, to show that the 2009 Parent provides written description support for determining a notification method by which to provide an alert to an external device based on the current state of the external device as offline. We highlight that Paragraphs 130 and 131 of the 2011 CIP Application disclose offline notification preferences for determining a notification method by which to provide an alert to an external device based on the current state of the external device as offline. Ex. 1110 ¶¶ 130–131. Specifically, paragraphs 130 and 131 describe that: the notification manager of the eventing and alerting subsystem 452 queries the configuration server 454 for the user's notification preferences and correlates these notification preferences with session manager 456 to determine the best notification method. That is, the notification manager queries the configuration server 454 and determines, for example, that the user has certain online notification preferences and certain offline notification preferences. If online, notify by, for example, the user's active session. If offline, notify by, for example, a txt message. . . . The notification manager of the eventing and alerting subsystem 452 then queries session manager 456 to determine the user's connectedness. Id. That is, if the user’s connectedness, or “current state” of the claimed external device, is offline, and the user’s offline notification preferences are “notify by txt message,” the notification manager will determine that the notification method for the external device having a current state of offline is by txt message. See id. Thus, the 2011 CIP Application describes a notification manager that queries a session manager to determine whether an external device is offline, and if the external device is offline, determines a notification method for providing an alert on the external device based on the current status of the external device as offline and the user’s offline notification preferences. Although we find this written description support for the determining limitation in the 2011 CIP Application, we do not find this written description support in the 2009 Parent.” slip op. at 25
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“As to the “determining a notification method” limitation (1.10), Petitioner asserts that Austin-Lane teaches determining: (1) the user device(s) to send the notification to (e.g., phone, PDA, notebook computer, desktop computer); (2) the communication protocol to use to send the notification, i.e., how to send the notification (e.g., SMTP (for email), SMS (for texts), HTTP (for web browsers)); and (3) the type of alert to provide, i.e., how to present the notification, (e.g., text, an icon, a pop-up window, a video, an email, an audible or tactile alarm), based on the current state of the at least one external device indicated by the session data (“presence information”), which may include whether and on which device(s) the user is online and/or whether and on which applications the user has an active session. Id. at 53 (internal citations omitted) (citing Ex. 1105 ¶¶ 4, 5, 29, 32, 33, 39, 46, 48, 61, 79, Fig. 1). We highlight that paragraph 61 of Austin-Lane discloses that: The type preferences 650 may include preferences for various notification types. . . . [A]uction alert #1 660 defines the following delivery precedence 663: (1) a web browser (if the user is online), (2) an IM client (if the user is online), (3) a mobile phone #1, (4) a PDA, (5) a mobile phone #2, (6) a pager, and (7) an email inbox. Ex. 1105 ¶ 61; see id. ¶¶ 74–77 (Describing that one of several notification methods for delivering an alert to a user’s device is determined based on the current state of the user’s device as online or offline). Thus, Austin-Lane describes determining a notification method by which to provide an alert on an external device based on the current state of the external device as online as well as offline.” slip op. at 29
Patent outcomesUS 8,751,948 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 8,751,948 - Adobe Inc. v. Jonathan E. JaffeNo claims unpatentablePTAB · Mar 4, 2026 · IPR2024-01352 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–6 were not shown unpatentable under any asserted §103 ground because the references did not teach monitoring the physical coupling between the sensor and memory.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The Institution Decision adopted and applied Petitioner’s proposed level of ordinary skill because Petitioner’s “definition generally comports with the level of skill necessary to understand and implement the teachings” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“The parties present various claim construction arguments, disputing the meaning of three limitations recited in claim 1: “a sensor, which is tightly coupled to said memory”; “monitoring the integrity of the tight coupling between said memory and said sensor”; and “based on.” See Pet. 9–14; PO Resp. 5–12; Pet. Reply 4–9; PO Sur-reply 4–11. For purposes of this Decision, we do not need to discuss the construction of “based on.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As explained below, this Decision turns on whether Glass or Rieger discloses limitation [1c] reciting “monitoring the integrity of the tight coupling between said memory and said sensor.” Ex. 1001, 20:65–66; see infra §§ II.C.2, II.E.1, II.F. That limitation recites an element which overlaps with the earlier-recited limitation “a sensor, which is tightly coupled to said memory.” To reach our decision, we need only provide a limited discussion of two of the parties’ claim construction arguments. Our analysis follows.” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“said integrity is compromised, then also providing an indication of said compromised integrity.” Ex. 1001, 20:65–21:2. Although Petitioner points out that the limitation does not expressly recite “‘specifically’ monitoring the tight coupling” (Pet. Reply 8), the structure of the clause suggests that the tight coupling is specifically monitored. At a high level, the limitation is straightforward in its recitation that the integrity being monitored is “of the tight coupling” (Ex. 1001, 20:65–66 (emphasis added)), plainly suggesting that the tight coupling is specifically monitored. More granularly, breaking the relevant clause down to its grammatical parts, the clause recites a gerund (“monitoring”) acting on a direct object (“the integrity”) which is modified by a prepositional phrase (“of the tight coupling”). Notably, the object of the preposition (“of”) is “the tight coupling.” Altogether, this reads that the integrity being monitored is specifically of the tight coupling. Also, the claim recites that “if said integrity is compromised, then also providing an indication of said compromised integrity.” Therefore, from the claim language we know that the “integrity” of the tight coupling is something that may be “compromised,” which is consistent with Patent Owner’s proposed construction of determining whether the physical coupling has been “accessed or disturbed.” Petitioner’s interpretation effectively inserts additional language into the limitation such that the limitation includes monitoring the integrity of a device containing or surrounding the tight coupling, such as a camera (or camera housing), e.g., “monitoring the integrity of a camera that includes the tight coupling.” But, because the plain reading and the structure of the limitation reads that it is specifically the tight coupling’s integrity—not another physical structure, like a camera—which is being monitored, a monitored is not consistent with the language of the claim. See PO Resp. 9 (arguing that “Petitioner’s construction is improper because the claim language explicitly requires monitoring the physical coupling between the memory and the sensor as opposed to some third structure” (emphasis omitted)).” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“package 50 does not specifically monitor the integrity of the coupling between Glass’s sensor and the memory and, instead, argues that Glass detects tampering of all “the components and interconnections contained in that packaging,” e.g., control logic 44, cropper 46, compressor 47, MUX 45, code generator 48, and the various interconnections between those components. See Pet. Reply 16; Ex. 1005, 5:13–41. As explained above, we construe “monitoring the integrity of the tight coupling between said memory and said sensor” to mean determining whether the physical 7 Petitioner does not assert that a person of ordinary skill in the art would have been motivated to modify Glass’s device in any way; Petitioner solely argues that Glass teaches limitation [1c], based on Petitioner’s proposed claim construction. See Pet. 30–32 (“Glass discloses this limitation.”); Pet. Reply 16–17 (“Glass and Rieger disclose the ‘monitoring’ step.”). disturbed, which specifically requires monitoring the physical coupling between the sensor and the memory. See supra § II.C.2. As we agree with Patent Owner that this limitation requires monitoring the physical coupling between the sensor and the memory, monitoring Glass’s tamper resistant package 50 does not teach or disclose “monitoring the integrity of the tight coupling between said memory and said sensor.” Accordingly, we determine that Petitioner fails to show that Glass teaches or suggests [1c] monitoring the integrity of the tight coupling between said memory and said sensor when said at least one internal and unique parameter is generated, and, if said integrity is compromised, then also providing an indication of said compromised integrity, as required by claim 1. Consequently, we determine that Petitioner has not shown, by a preponderance of the evidence, that the subject matter of claim 1 would have been obvious over Glass.8” slip op. at 30
Patent outcomesUS 6,757,828 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 6,757,828 - Biofrontera Inc. / Biofrontera Bioscience GmbH et al. v. Sun Pharmaceutical Industries, Inc.All claims unpatentablePTAB · Feb 23, 2026 · IPR2024-01312 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1, 2, 4–6, 16, 17, and 19–21 are unpatentable as obvious over Lundahl and Larsen; Ground 2 was conceded, and the motion to exclude was denied.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner asserts that Petitioner has not provided a valid justification for requiring a POSITA to have both an engineering degree and a medical degree. Prelim. Resp. 22. We agree, insofar as Petitioner has not clearly set out any particular explanation or evidence in support of its dual-degree requirement. In all other respects, we note that the parties’ proposed definitions are largely similar. Because we determine that Patent Owner’s proposed definition is reasonable and consistent with the ’028 patent and the cited art, we adopt Patent Owner’s definition. In any event, our Decision does not turn on this level of skill determination. B.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“device “[f]or the treatment of large-area tissues,” such as the backs of human patients, wherein several applicators 13 are “flexibly connected to each other through hinges.” Id. (quoting Ex. 1004 ¶ 72). Petitioner asserts that a POSITA would have been motivated “to incorporate Larsen’s solution of connecting light applicators by hinges, to allow for adjustability of Lundahl’s device to provide the desired irradiance and irradiance uniformity to all target areas during PDT.” Id. (citing Ex. 1015 ¶ 127). According to Petitioner, a “POSITA would have had a reasonable expectation of success in combining Lundahl with Larsen, because both references describe similar illuminators for using light to treat conditions on a patient’s skin.” Id. at 31 (citing Ex. 1015 ¶ 128). Petitioner’s proposed modification of Lundahl also involves using LEDs as a light source instead of Lundahl’s fluorescent tubes. Id. According to Petitioner, a POSITA would have been motivated to make this change because: (1) LEDs had a lower cost and a longer lifetime than fluorescent tubes; (2) fluorescent tubes were known to have inconsistent light output within the tube itself; and (3) “the use of LEDs would be more practical to reduce spacing between light sources and the edges of the panels, as opposed to the bulky metal couplings at the end of fluorescent tubes, to reduce optical dead space across the light surface.” Id. (citing Ex. 1014, 4:41–42, 6:31–42; Ex. 1015 ¶ 129). Petitioner asserts that a POSITA would have had a reasonable expectation of success with this modification because Lundahl and Larsen “describe similar illuminators and the conversion from fluorescent tubes to LEDs was a routine practice prior to 2015.” Id. at 32 (citing Ex. 1015 ¶ 131). Patent Owner does not meaningfully dispute the Petitioner’s proposed reasons to combine Lundahl and Larsen. See generally PO Resp. To the extent Patent Owner argues that a POSITA would not have been motivated to make the combination because it would negatively affecting uniform illumination (PO Resp. 24), the motivating benefit here—using adjustable LED panels instead of monolith fluorescent tubes—outweighs the alleged disadvantages for the many reasons given by Petitioner, including greater adjustability and improved LED performance. See Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“[t]he fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify.”); Reply 14. We are persuaded that a POSITA would have been motivated to combine Lundahl and Larsen for the reasons advanced by Petitioner.” slip op. at 20
- Obviousness (§103) › KSR rationalesMotivation foundDecided for petitioner
“Patent Owner further argues that Petitioner’s reasoning (i.e., that it would have been obvious to try placing the hinges on the inner side surfaces) is unsupported and conclusory. PO Reps. 53–54. Patent Owner argues that Petitioner fails to identify a single prior art reference showing hinged structures on inner side surfaces. Id. This argument ignores that Larsen expressly identifies hinges on at least bottom side surfaces, and Petitioner merely proposes modifying their location from the bottom sides to inner sides. We find credible Dr. Grove’s testimony that relocating hinges would have been within the level of ordinary skill in the art. Ex. 1015 ¶ 155. Dr. Jokerst testifies that a POSITA would have been discouraged from placing hinges between Larsen’s adjustable applicators, because the hinges would create gaps that interfere with uniform illumination as well as the panels’ wiring, and create issues with the use and alignment of the panels. Ex. 2050 ¶ 175. However, a system with discrete panels connected by hinges (like in Larsen) will already have wiring, use and alignment technical challenges, regardless of the location of the hinges— the expected consequence of connecting multiple movable electronic panels. Moreover, the ’028 patent acknowledges in its discussion of conventional illuminators that placing hinges between panels was already known. Ex. 1001, 2:7–15. With respect to Dr. Jokerst’s opinion that the hinges would create gaps negatively affecting uniform illumination, we are persuaded that it would have been within the skill of a POSITA to locate the hinges on the inside surfaces “in a nearly flush arrangement,” such that the gaps would be minimized. Id.; Ex. 1015 ¶ 155. We also credit Dr. Grove’s supplemental testimony on this issue, directly refuting Dr. Jokerst’s testimony regarding gaps and uniform illumination (and therefore within the proper scope of reply, contrary to Patent Owner’s argument otherwise (Mot. 9). See Ex. 1026 ¶¶ 17–20 (explaining LED light divergence and that the physical space caused by hinges “is easily addressed” to maintain uniform illumination).9 We further point out that the ’028 patent also suggests that gaps do” slip op. at 24
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Dr. Jokerst testifies that a POSITA would have been discouraged from placing hinges between Larsen’s adjustable applicators, because the hinges would create gaps that interfere with uniform illumination as well as the panels’ wiring, and create issues with the use and alignment of the panels. Ex. 2050 ¶ 175. However, a system with discrete panels connected by hinges (like in Larsen) will already have wiring, use and alignment technical challenges, regardless of the location of the hinges— the expected consequence of connecting multiple movable electronic panels. Moreover, the ’028 patent acknowledges in its discussion of conventional illuminators that placing hinges between panels was already known. Ex. 1001, 2:7–15. With respect to Dr. Jokerst’s opinion that the hinges would create gaps negatively affecting uniform illumination, we are persuaded that it would have been within the skill of a POSITA to locate the hinges on the inside surfaces “in a nearly flush arrangement,” such that the gaps would be minimized. Id.; Ex. 1015 ¶ 155. We also credit Dr. Grove’s supplemental testimony on this issue, directly refuting Dr. Jokerst’s testimony regarding gaps and uniform illumination (and therefore within the proper scope of reply, contrary to Patent Owner’s argument otherwise (Mot. 9). See Ex. 1026 ¶¶ 17–20 (explaining LED light divergence and that the physical space caused by hinges “is easily addressed” to maintain uniform illumination).9” slip op. at 24
Patent outcomesUS 11,697,028 unpatentable§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,697,028 - Kohler Co. v. Delta Faucet Co.All claims unpatentablePTAB · Feb 18, 2026 · IPR2024-00700 · APJ Jane E Inglese · IPR · Remand
On remand, the Board held claims 1–24 unpatentable as obvious over the asserted prior-art grounds, including Tseng’s disclosure of side-emitted light under the Director’s construction.
RulingsRemand decision- RemandOther
“We have jurisdiction under 35 U.S.C. § 6. This Final Written Decision on Remand from Director Review is entered pursuant to 35 U.S.C. § 318(a). Having reviewed the complete trial record pursuant to the Director Review Order, we determine that Petitioner has shown, by a preponderance of the evidence, that the challenged claims are unpatentable.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s definition of a POSITA. Petitioner’s witness (Mr. Cook) qualifies as a POSITA under this definition, and, therefore, is qualified to opine from the perspective of a POSITA on technical matters included within the areas of expertise prescribed by the definition. As indicated above, Petitioner’s definition of a POSITA does not require education in the field of optics and professional experience designing or analyzing optical apparatus, unlike Patent Owner’s definition. We are aware, however, that Patent Owner’s witness (Dr. Klopp) has more extensive experience with optical systems and methods than Petitioner’s witness (Mr. Cook). Compare Ex 1003 ¶¶ 8–14, Ex. 2005, 39:21–59:17, with Ex. 2003 ¶¶ 3–20, Ex. 2004, 1–2, Ex. 1015, 10:22–13:25. Although Mr. Cook possesses excellent credentials in the field of mechanical engineering, his experience in the design and analysis of optical systems and methods is sparse and insubstantial compared to that of Dr. Klopp. Id. Due to this difference in experience levels, in instances where the witnesses express differing views on factual issues related to optical systems and methods, we accord more weight to Dr. Klopp’s testimony than to Mr. Cook’s.” slip op. at 9
- Expert testimonyPatent owner expert creditedDecided for patent owner
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“The Director’s Order instructs us to adopt its interpretation of the recitation in claim 10 of “an outer illumination surface extending perpendicular to the longitudinal axis of the housing” (“the disputed limitation”) as being “satisfied by any amount of light emitted from the side surface.” Order 3. We, accordingly, construe the disputed limitation of claim 10 as a surface extending perpendicular to the longitudinal axis of the housing through which any amount of light is emitted from the side surface.” slip op. at 10
Patent outcomesUS 10,393,363 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,393,363 - Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco LimitedAll claims unpatentablePTAB · Feb 18, 2026 · IPR2024-01296 · APJ Barry L Grossman · IPR · Final written decision
Claims 1–46 are unpatentable as obvious under § 103 over the asserted combinations of Chang, Fang, Yuen, Khalil, Park, and Chen.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that before the effective filing date of the claimed invention a person of ordinary skill in the art (“POSITA”) “would have had at least a bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment” and that “[m]ore education could substitute for experience and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s cited testimony supports Petitioner’s assertion.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“[parent application to the application that matured into the ’380 patent], the Examiner construed the term ‘self-contained, in-bra wearable device’ to mean ‘complete, or having all that is needed, in itself’ and is capable of being worn in a bra.” Pet. 3 (citing Ex. 1005, 2290) (emphasis omitted). According to Petitioner, “PO did not dispute this construction, and Petitioner applies it herein.” Id. Petitioner also states that “[o]ther terms of the Challenged Claims should receive their plain and ordinary meaning, and no formal claim constructions are necessary in this proceeding because ‘claim terms need only be construed to the extent necessary to resolve the controversy.’” Id. (citing Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011); Ex. 1003 ¶¶ 69–70). Again, because Patent Owner did not file a Response, we exercise our discretion and look to Patent Owner’s Preliminary Response. We note that in the Preliminary Response Patent Owner states that “[f]or purposes of this Preliminary Response, no claim terms require construction to resolve the prior art grounds raised in the Petition.” Prelim. Resp. 19. According to specific construction, any such terms should be accorded their plain and ordinary meaning in light of the specification.” Id. Construction is needed only for those terms “that are in controversy, and only to the extent necessary to resolve the controversy.” See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). There are no claim terms in controversy. Accordingly, we need not construe any terms for our analysis.” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Petitioner contends (Pet. 17) that a person of ordinary skill in the art “would have been motivated to implement Chang’s breast pump device as suggested by Fang” to achieve four benefits: (1) “to facilitate convenient cleaning and maintenance” (Pet. 19 (citing Ex, 1003 ¶ 102)); (2) “to facilitate more rapid assembly and disassembly (e.g., during use)” (id. at 20–21 (citing Ex. 1003 ¶ 105)); (3) “as a particularly effective and suitable option to generate negative” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“a breast pump device having “a diaphragm pump that generates negative air pressure.” Pet. 33; see also id. at 38. Petitioner explains Chang’s pump “generates suction by cyclical compression and decompression of a conduit or flex-tube, and expressly notes that other configurations were known and suitable.” Id. at 17 (citing Ex. 1007 ¶¶ 22, 25, 28, 68, 79, 84–86). Chang, however, does not mention, specifically, that Chang’s pump is a “diaphragm” pump. We note, however, that this claim clause does not state or require any specific type of pump. It merely requires a “pump.” Clause 1[e]/29[e], discussed below, however, does require a “diaphragm” pump. Petitioner here merely lays the foundation for this later clause by asserting that “Fang provides a straightforward suggestion of a diaphragm pump including a diaphragm housing component formed in a wall of the pump housing.” Id. at 18 (citing Ex. 1009 ¶¶ 24–25, Fig. 7; Ex. 1003 ¶ 97). Thus, Petitioner asserts, Fang teaches “an ‘air pump’ in pneumatic connection with the diaphragm that serves to generate negative air pressure,” and Chang teaches “the location of pump components (e.g., ‘motor’ [46]).” Pet. 33 (citing Ex. 1007 ¶¶ 72, 80, Fig, 6A; Ex. 1009 ¶¶ 19, 24). Petitioner then asserts that “the ‘air pump’ components of the combined device are positioned within the pump housing,” and the air pump is powered by Chang’s rechargeable battery. Id. (citing Ex. 1007 ¶¶ 72, 80).” slip op. at 34
Patent outcomesUS 11,413,380 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,413,380 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Feb 9, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision
Claims 2, 4, 9–12, and 17 are unpatentable under § 103 because the prior-art combinations teach the claimed features and have adequate motivation and reasonable expectation of success.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art “would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“1. Whether Ma Qualifies as a Prior Art Printed Publication First, Patent Owner argues that Petitioner has not demonstrated that Ma was publicly accessible in August 2008 so as to qualify as prior art. PO 11 As Petitioner notes, the district court adopted a claim construction requiring only “one or more wavelengths” in the infrared-to-UV spectrum. PO Resp. 26 (citing Ex. 2031, 47–48). Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 10
Patent outcomesUS 11,828,425 unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,828,425
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.