- Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Mobileye Global, Inc. v. Facet Technology Corp.Rehearing deniedPTAB · Apr 22, 2025 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Rehearing
The Board denied Patent Owner’s rehearing request, leaving institution in place on claim 15 based on the Gallagher–Lumia obviousness challenge.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“II. STANDARD OF REVIEW A party requesting rehearing bears the burden of showing that the decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id. When reconsidering a decision on institution, we review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors. Star Fruits S.N.C. v. United States, 393 F.3d 1277, 1281 (Fed. Cir. 2005); Arnold P’ship v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“or overlooked any matter. As we explained in the Institution Decision, the ’255 patent discloses that the recited characterization profile allows the system to convert the intensity values measured by the intensity sensor into luminance values based on the sensor’s ability to sense the particular color of the measured light. Inst. Dec. 21; Ex. 1001, 11:41–48. The ’255 patent states that “the light intensity sensor’s 280 ability to sense . . . a particular color” is the “the light intensity sensor’s 280 profile for [that] particular color.” Ex. 1001, 11:45–47. The ’255 patent further states that this “[l]ight intensity sensor 280 characterization is essential for high precision computations.” Id. at 11:48–49. Thus, as we stated in the Institution Decision, the recited “characterization profile” refers to a conversion factor used to convert the measured light intensity into luminance. As this conversion factor is based on the light intensity sensor’s ability to sense the particular color of light reflected by the road sign, we agree that it is empirical information. Patent Owner fails to explain adequately how the fact that the ’255 patent discloses storing multiple conversion factors for multiple colors of measured light in a digital look-up-table (see id. at 11:56–59 (“The light intensity sensor characterization 275 is empirical information about the light intensity sensor 280 that is used to create the [look-up table] 475.”)) has any bearing on our interpretation.” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Owner to the Institution Decision where we fully addressed Patent Owner’s contentions. See Inst. Dec. 29–31. As we explained, “Petitioner proposes to incorporate Lumia’s teaching of measuring luminance values into Gallagher’s system, and argues that an ordinarily skilled artisan would have had a reasonable expectation of success given Gallagher’s disclosure of determining calibration factors for each individual sensor in the array of sensors.” Id. at 30. In other words, Petitioner proposes to use Gallagher’s array of sensors to measure luminance in the manner taught by Lumia. We also explained in the Institution Decision how Lumia discloses using a video camera to measure the luminance of a road sign. Id. at 27–29. We further explained that, in the Petition, “Petitioner sets forth reasoning with rational underpinning to support its contentions that it would have been obvious to combine the teachings of Gallagher and Lumia” by, for example, “argu[ing] that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels.” Id. at 30–30 (citing Pet. 46). We further explained that Petitioner’s arguments were supported by the testimony of it witness, Dr. Thorpe. Id. at 31 (citing Ex. 1003 ¶ 116).” slip op. at 7
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,335,255 - Deere & Company v. David’S Dozer V-Loc System, Inc.Institution deniedPTAB · Mar 18, 2025 · IPR2024-01442 · APJ Robert J Silverman · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–4 unpatentable under any asserted obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the Petition and the Preliminary Response (including any other authorized submissions) “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.”” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner’s proposal for the level of ordinary skill in the art differs from that of Petitioner, primarily because Patent Owner contends that such a person of ordinary skill would have a certain degree of experience relating specifically to skid steers, or similar machinery, and their hydraulic systems. See Prelim. Resp. 8–10 (citing Ex. 2001 ¶ 31). Insofar as we understand the significance of Patent Owner’s concerns about the differences between the parties’ proposals, these differences do not bear upon the issues addressed herein. Accordingly, for the purposes of the present Decision, we adopt Petitioner’s proposed definition of the relevant level of ordinary skill in the art. Further, with regard to the issues addressed in this Decision, Petitioner’s proposed description of the level of ordinary skill in the art appears to be consistent with the level of skill indicated by the ’300 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We agree with Patent Owner. Petitioner argues that “Patent Owner made the deliberate choice to claim broadly,” eschewing “structural limitations that would have expressly or implicitly required the hydraulic of Element [1.4] to differ from the hydraulic of Element [1.5].” Reply 7. Further, Petitioner argues that “Patent Owner chose to generically recite ‘a hydraulic’ in each of Elements [1.4] and [1.5] without distinguishing labels, identifiers, or qualifiers.” Id. To the contrary, the two recited “hydraulic[s]” are distinguished by the language surrounding and modifying each instance in the method of claim 1. Indeed, the recitations of distinct operations performed by each “hydraulic,” in the claimed method, further support the understanding these are distinct and different structures. Additionally, as Patent Owner contends (see Prelim. Resp. 16), each instance of “hydraulic” is introduced with the indefinite article “a” — a signal that the two instances of “a hydraulic” do not refer to the same structure. See Becton, Dickinson and Co. v. Tyco Healthcare Group, LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (“Where a claim lists elements separately, ‘the clear implication of the claim language’ is that those elements are ‘distinct components’ of the patented invention.”) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004)); see also CAE Screenplates, Inc. v. Heinrich Fiedler GmbH & Co., 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings.”); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996) (concluding that where a claim provides for two separate elements, a “second portion” and a “return portion,” these two elements “logically cannot be one and the same”).” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundNot shown unpatentableNot shown unpatentable
“As Patent Owner argues, Petitioner’s proposed combination of Funk and Lewis “would interfere with the intended operation of the Funk control system to move the lift arms up and down in response to inter alia changes in the height signal.” Prelim. Resp. 20. This scenario is similar to that in Tec Air, 192 F.3d at 1356, which involved a claimed injection-molding technique that used screw-threaded adjustable plugs accessed from the inner, cavity-facing, side of the mold. The proposed combination included a prior art reference disclosing adjustment members accessed from the opposite, outer, side of the mold, and having a non-threaded smooth tip that extended through the mold and into the cavity. Id. at 1360. The Federal Circuit held that the prior art reference was properly determined to teach away from the claimed invention, because “no screw driver would be able to turn the smooth-headed screws from the cavity-side of the mold,” hence the proposed “combination would be inoperable for its intended purpose.” Id. Likewise, the proposed combination in the present matter teaches away from the subject matter of claim 1, because it would “immobilize [Funk’s] main arm,” and its associated hydraulic cylinder 18, “leaving just ‘one’ of Funk’s two adjustment mechanisms — blade tilt — available for grade control” (Pet. 10), thereby decreasing the system’s accuracy (see Ex. 2001 ¶¶ 113– 14) and negating the very technique that Funk relies upon to achieve its stated goal. See Ex. 1004 ¶ 7 (“[O]ne object of the present invention is to provide an automatic leveling control system that is sufficiently accurate for preparing the ground prior to the construction of concrete floors and foundations.”)” slip op. at 28
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · Markman · KSR · GrahamPatents in suitUS 10,533,300 - PTAB · Mar 5, 2025 · IPR2024-01111 · APJ Sean P O’Hanlon · IPR · Institution
The Board instituted IPR of claims 1–16 on all asserted grounds, finding a reasonable likelihood that claims 1 and 9 would be obvious over Gallagher and Schofield.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“Texas litigation, but significant work still remains to be done. See Ex. 2004. Moreover, we agree that Petitioner filed the Petition expeditiously. See 2nd Prelim. Reply 4. Accordingly, the facts underlying this factor weigh strongly against exercising our discretion to deny institution.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“h. Conclusion Accordingly, at this stage of the proceeding, we determine that Petitioner has established a reasonable likelihood of prevailing on its assertion that claim 9 would have been obvious in view of the combination of Gallaher and Schofield.” slip op. at 32
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither party proposes a definition for any claim term. See Pet. 6; Prelim. Resp. 4–5. For purposes of this Decision, and based on the record before us, we determine that no construction of any term is necessary. We note that this determination does not preclude the parties from arguing their proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that claim construction, in general, is an issue to be addressed at trial. A final determination as to claim construction will be made at the close of the proceeding, after any hearing, based on all the evidence of record. The parties are expected to assert all of their claim construction arguments and evidence during the trial as permitted by our rules. slip op. at 19
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner has not advanced persuasive evidence to put into dispute Petitioner’s identification of itself as the sole real party in interest. Patent Owner asserts that the two third parties it seeks to add as defendants in the Texas Litigation produce products that incorporate components manufactured by Petitioner and that Patent Owner has asserted that these Petitioner products infringe the ’328 patent in the Texas Litigation. Prelim. Sur-reply 4–5. Patent Owner also asserts that these two third parties asserted an obligation to defend Petitioner and the other third party against Patent Owner’s infringement assertions. Id. at 5. However, Patent Owner does not assert or provide any evidence that Petitioner must indemnify any of the three third parties or that any of the third parties controls any aspect of this inter partes review proceeding. See id. Moreover, Petitioner stipulates that, if we institute inter partes review in this proceeding, it will not pursue in the Texas Litigation “‘any ground that [Petitioner] raised or reasonably could have raised’ during this proceeding.” Prelim. Reply 4 (alteration in original) (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential in relevant part)). Furthermore, to the extent that the two parties Patent Owner seeks to add as defendants in the Texas Litigation should be named as real parties in interest in this proceeding, those parties have also filed a stipulation here (see Ex. 1024), alleviating any concerns of conflict with district court litigation.” slip op. at 14
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,671,328 - PTAB · Mar 5, 2025 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Institution
The Board instituted IPR of claim 15 based on Gallagher and Lumia, finding a reasonable likelihood that the combination renders the claim obvious.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“7. Holistic Assessment of the Fintiv Factors On this record, after weighing all of the factors and taking a holistic view, we determine that the facts in this case that weigh against exercising discretion outweigh the facts that favor exercising discretion. Accordingly, we determine that the circumstances presented weigh against exercising our discretion under 35 U.S.C. § 314(a) to deny institution of inter partes review based on the Texas litigation.” slip op. at 16
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“dispute Petitioner’s identification of itself as the sole real party in interest. Patent Owner asserts that the two third parties it seeks to add as defendants in the Texas Litigation produce products that incorporate components manufactured by Petitioner and that Patent Owner has asserted that these Petitioner products infringe the ’255 patent in the Texas Litigation. Prelim. Sur-reply 4. Patent Owner also asserts that these two third parties asserted an obligation to defend Petitioner and the other third party against Patent Owner’s infringement assertions. Id. However, Patent Owner does not assert or provide any evidence that Petitioner must indemnify any of the three third parties or that any of the third parties controls any aspect of this inter partes review proceeding. See id. Moreover, Petitioner stipulates that, if we institute inter partes review in this proceeding, it will not pursue in the Texas Litigation “‘any ground that [Petitioner] raised or reasonably could have raised’ during this proceeding.” Prelim. Reply 4 (alteration in original) (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential in relevant part)). Furthermore, to the extent that the two parties Patent Owner seeks to add as defendants in the Texas Litigation should be named as real parties in interest in this proceeding, those parties have also filed a stipulation here (see Ex. 1024), alleviating any concerns of conflict with district court litigation.” slip op. at 14
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Accordingly, at this stage of the proceeding, we determine that Petitioner has established a reasonable likelihood of prevailing on its assertion that claim 15 would have been obvious in view of the combination of Gallagher and Lumia.” slip op. at 31
- Adverse judgmentAdverse judgmentOther
“Here, Patent Owner filed a statutory disclaimer of claims 12–14 and 17–23. Prelim. Resp. 1; Ex. 2002. Based on our review of Exhibit 2002, we determine that a disclaimer of claims 12–14 and 17–23 of the ’255 patent under 35 U.S.C. § 253(a) has been filed with the Office as of December 9, 2024. Based on the information in the public record, we find that the disclaimer complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Because claims 12–14 and 17–23 have been disclaimed under 35 U.S.C. § 253(a), in compliance with 37 C.F.R. § 1.321(a), we do not reach challenges to claims 12–14 and 17–23. As a result, the remaining challenged claim is claim 15 (“the challenged claim”).” slip op. at 7
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,335,255 - Ewald Dörken AG v. Schaeffler Technology AG & Co. KG.Institution deniedPTAB · Feb 20, 2025 · IPR2024-01365 · APJ James J Mayberry · IPR · Institution
The Board denied institution on all three obviousness grounds because the Petition did not show a reasonable likelihood of prevailing on claims 1–7.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2024) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner contends that “[a] person having ordinary skill in the art (‘POSITA’) would have been a person having, as of 21 July 2017: (1) at least an undergraduate degree in engineering and/or material science, or similar education; and (2) two or more years of experience with coatings.” Pet. 7–8; see Ex. 1009 ¶ 25 (providing the same level of ordinary skill). Patent Owner does not dispute Petitioner’s level of ordinary skill in the art. Prelim. Resp. 5. We apply Petitioner’s definition of the level of ordinary skill in the art. We determine that this definition is consistent with the prior art of record and the skill reflected in the Specification of the ’756 patent, based on our review of the record.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction neededOther
“Petitioner submits that . . . the claims should be given their plain and ordinary meaning.” Pet. 11. Patent Owner does not propose any specific constructions. See Prelim. Resp. 4–5.8 We determine that we need not expressly construe any other claim terms to resolve the parties’ disputes on the current record. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’” (emphasis added)) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). To the extent that the scope of any other claim term requires discussion, however, we provide it in our assessment of the challenges, which we turn to next. slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Ex. 1003 ¶¶ 18–19. Petitioner provides no additional discussion on this disclosure, including how it satisfies the zinc flake coating limitation. See Pet. 15–17, 20. Petitioner’s sole citation to Dr. Haber’s declaration associated with this claim limitation is to paragraph 35, which provides the same claim chart as is in the Petition. See Pet. 17; Ex. 1009 ¶ 35.” slip op. at 12
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,098,756 - PTAB · Feb 20, 2025 · IPR2024-00996 · APJ Ken B Barrett · IPR · Institution
The Board instituted review of claims 13–18 on all asserted grounds, finding a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” 35 U.S.C. § 325(d). The Board uses a two-part framework in determining whether to exercise its discretion under § 325(d), specifically: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, Paper 6 at 8. The art or arguments presented in the Petition are not “substantially the same” as those previously presented to the Office when there are differences between them that are material to the Office’s prior consideration of the art and arguments. Wolfspeed, Inc. v. Trs. of Purdue Univ., IPR2022-00761, Paper 13 at 7–8 (Vidal Mar. 30, 2023).” slip op. at 9
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that: [A] person of ordinary skill in the art at the time of the alleged invention (“POSITA”) would have had a bachelor’s degree or higher in electrical engineering, at least 3 years of experience designing or researching electronic circuits, and familiarity with power electronics and inductive power transfer circuits. Pet. 8 (citing Ex. 1003 ¶ 20). Patent Owner states that, “[f]or purposes of this preliminary response, Patent Owner adopts the Petitioner’s proposal.” Prelim. Resp. 17. Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art.” slip op. at 18
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[a]ll claim terms should be construed according to the Phillips standard,” and “[h]ere, given the remarkable overlap between the preferred embodiment of the ’461 patent and the prior art/predictable combinations articulated in Grounds 1A–3, Petitioners submit that no claim elements need a formal construction for purposes of resolving the controversy in this proceeding.” Pet. 8. Patent Owner states that, “[t]o simplify the issues before the Board, Patent Owner has not asserted any claim constructions in this preliminary response and adopts the Petitioner’s position that ‘[a]ll claim terms should be construed according to the Phillips standard.’” Prelim. Resp. 17 (quoting Pet. 8). On this record and for purposes of this decision, we determine that no” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“At this preliminary stage of the proceeding, we do not agree with Patent Owner’s arguments. Patent Owner does not cite to evidence, such as expert testimony, to support its implied argument that Olson’s measured current is “fundamentally different” from the current received by the primary coil. See Prelim. Resp. 31–32. Petitioner’s declarant, Dr. Woods, on the other hand, testifies, inter alia, that “[t]he ‘[c]urrent measured by current measure block 226 is used in the calculation of power, which as depicted in FIG. 14, measures the ‘power in’ provided to transmit block 214/primary coil 54.” Ex. 1003 ¶ 37 (citing Ex. 1004 ¶¶ 74–75, Fig. 14) (first alteration added); see also, e.g., id. ¶ 42 (Dr. Woods testifying that the measured current to the power supply “is the current driving the external antenna 52, via the transmit block 214 and to the primary coil 54.” (citing Ex. 1004 ¶¶ 74–75, 112, Fig. 14)). Paragraph 75 of Olson, cited in support of that testimony, provides: “The power in is gauged by the power generated by charging unit 50 and is determined by multiplying the voltage of the internal voltage of charging unit 50, e.g., the voltage of a battery or batteries internal to charging unit 50, by the current driving external antenna 52.” Ex. 1004 ¶ 75 (emphasis added). We note that external antenna 52 includes primary coil 54. See, e.g., Fig. 14. Dr. Woods’ testimony is, at this stage, unrebutted. Patent Owner also argues that “Petitioner fails to provide any evidence regarding the function of Olson’s microprocessor 212 in relation to measuring input power,” and that, “[w]hile Olson describes a power calculation in paragraph [0075], Olson does not describe this power calculation as performed by microprocessor 212.” Prelim. Resp. 32 (citing Pet. 16; Ex. 1004 ¶ 72) (first alteration added). At this preliminary stage of the proceeding, we do not agree with Patent Owner’s arguments regarding the microprocessor. Although Patent Owner does not bear the burden to show patentability, we observe that Patent Owner does not suggest that there is another component in Olson’s external charging device that might perform the admittedly-disclosed power calculation. See Prelim. Resp. 32–33. Dr. Woods testifies that microprocessor 212 receives the measured current and the input voltage of the charging device, and, from those values, calculates power in. See Ex. 1003 ¶¶ 43–44 (citing, inter alia, Ex. 1004 ¶¶ 71–78, Fig. 14); see also Ex. 1004 ¶ 74, Fig. 14 (Olson stating that “[c]urrent measured by current measure block 226 is used in the calculation of power in along with the voltage of batteries 160,” and Figure 14 depicting the signal from measure block 226 as an input to microprocessor 212). Dr. Woods’ testimony is, at this stage, unrebutted.” slip op. at 26
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,626,461 - PTAB · Feb 20, 2025 · IPR2024-00995 · APJ Ken B Barrett · IPR · Institution
The Board instituted IPR on claims 1–6, 8, and 10–13 on all asserted grounds, finding a reasonable likelihood of success on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” 35 U.S.C. § 325(d). The Board uses a two-part framework in determining whether to exercise its discretion under § 325(d), specifically: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, Paper 6 at 8. The art or arguments presented in the Petition are not “substantially the same” as those previously presented to the Office when there are differences between them that are material to the Office’s prior consideration of the art and arguments. Wolfspeed, Inc. v. Trs. of Purdue Univ., IPR2022-00761, Paper 13 at 7–8 (Vidal Mar. 30, 2023).” slip op. at 11
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’204 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’204 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey–Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)).” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“different from the resonant frequency of the inductive couple.” Ex. 1001, 21:16–20. The Specification then states the following: “Preferably the transmission frequency is selected to lie within one of the near-linear regions 6, 8 [of Figure 6b] where the slope of the frequency-amplitude graph is less steep.” Id. at 21:20–23; see also id. at 21:56–59 (“Referring back to FIG. 6b, the frequency of transmission is selected to be in the approximately linear region 8 of the curve between a lower frequency value of fL and an upper frequency value of fU.”9); Pet. 8 (citing the same).” slip op. at 23
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,083,204 - Google LLC v. Geoscope Technologies Pte. Ltd.All claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01210 · APJ Patrick R Scanlon · IPR · Final written decision
Claim 18 is unpatentable as anticipated by Shkedi and Zhu; claims 1, 15, 41, and 52 were statutorily disclaimed, and the alternative obviousness grounds were not reached.
RulingsFinal written decision- Adverse judgmentAdverse judgmentOther
“After institution, Patent Owner filed a Patent Owner Response (Paper 26, “PO Resp.”). Patent Owner also filed a statutory disclaimer of claims 1, 15, 41, and 52. PO Resp. 1; Ex. 2024. Accordingly, the only claim remaining for our consideration at trial is claim 18. See 35 U.S.C. § 253 (disclaimer of claims considered effective as if part of original patent); 37 C.F.R. § 42.107 (Board will not institute trial on disclaimed claims). Petitioner filed a Reply (Paper 33, “Reply”), and Patent Owner filed a Sur-reply (Paper 37, “Sur-reply”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not dispute Petitioner’s definition of the level of ordinary skill in the art for purposes of this proceeding. PO Resp. 11–12 (citing Ex. 2020 ¶¶ 47–48). For purposes of this Final Written Decision, we adopt Petitioner’s proposal as reasonable and consistent with the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Upon consideration of the parties’ arguments and for the reasons explained below, we agree with Petitioner that Patent Owner’s additional requirement of evaluating the calibration data to determine the boundaries of the area represented by a grid point should not be included in the construction of either “grid point” or “non-uniform grid point.” Instead, based on the full record, we discern no reason to alter our prior construction of “grid point” as “a point associated with representative calibration data for an area” and maintain that construction for this Final Written Decision for the following reasons. First, the construction of “grid point” we adopt here is supported by the Specification of the ’358 patent. Namely, the ’358 patent discloses that “[i]n general, a non-uniform grid point (NUG) may represent the signal characteristics and/or calibration data over a given region,” and “NUGs represent an area of collected calibration data.”9 Ex. 1001, 3:57–67. The district court identified the second quoted passage, which is identically recited in the ’104 patent (see Ex. 1018, 3:50–60) as “provid[ing] a clear indication of the meaning of ‘grid point.’” Ex. 1028, 19 (emphasis added). We agree with the district court’s analysis. Although the ’358 patent does not explain how a generic “grid point” might differ from the described “nonuniform grid point,” we do not find this distinction pertinent to construing “grid point” in this case because neither party raises this issue. Furthermore,” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We agree with Petitioner. The pertinent disclosure from Shkedi reads: Simply stated, if a mobile telephone (at a user selected location) measures a plurality of service antenna signals and stores these with their respective service antenna identifications, then that mobile telephone (or an equivalent unit) upon observing an respective signal strengths—can reasonably conclude that it is within a predetermined proximity of the original user selected location. Ex. 1006, 8:41–48. Here, we find that the language “within a predetermined proximity of the original user selected location” refers to an area around the original user selected location. In other words, “within a predetermined proximity of the original user selected location” discloses that, instead of being exactly at the original user selected location, the mobile telephone only need be in the area or vicinity of the original user selected location. Indeed, in acknowledging “that Shkedi assumes the user is within some ‘predetermined’ distance of [the original user selected] location” (PO Resp. 33), Patent Owner effectively confirms this interpretation of Shkedi’s disclosure. That is, being within some predetermined distance of the original user selected location is equivalent to being within a circle centered on the original user selected location and having a radius equal to the predetermined distance. That Shkedi allegedly only “assumes” that the user is within the predetermined distance of the original user selected location does not detract from the fact that Shkedi’s disclosure of “within a predetermined proximity of the original user selected location” describes an area around the original user selected location.” slip op. at 34
Patent outcomesUS 8,400,358 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,400,358 - Google LLC v. Geoscope Technologies Pte. Ltd.All claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01209 · APJ Patrick R Scanlon · IPR · Final written decision
Claim 2 is unpatentable as anticipated by Shkedi; the Board did not reach the alternative obviousness ground based on Shkedi and Spain.
RulingsFinal written decision- Adverse judgmentAdverse judgmentOther
“After institution, Patent Owner filed a Patent Owner Response (Paper 27, “PO Resp.”). Patent Owner also filed a statutory disclaimer of claims 1, 3, and 11. PO Resp. 1; Ex. 2024. Accordingly, the only claim remaining for our consideration at trial is claim 2. See 35 U.S.C. § 253 (disclaimer of claims considered effective as if part of original patent); 37 C.F.R. § 42.107 (Board will not institute trial on disclaimed claims). Petitioner filed a Reply (Paper 34, “Reply”), and Patent Owner filed a Sur-reply (Paper 39, “Sur-reply”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not dispute Petitioner’s definition of the level of ordinary skill in the art for purposes of this proceeding. PO Resp. 11–12 (citing Ex. 2020 ¶¶ 47–48). For purposes of this Final Written Decision, we adopt Petitioner’s proposal as reasonable and consistent with the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“contention that, because the district court referred to the data points within an area being statistically similar as the defining characteristic of a NUG region, the claimed grid points cannot exist until after the calibration data is gathered and analyzed. See PO Resp. 18–19. This contention, even if correct, is not persuasive because it is generally improper to read limitations from specific embodiments into the claims. See Cadence Pharms. Inc. v. Exela PharmSci Inc., 780 F.3d 1364, 1369 (Fed. Cir. 2015) (“[E]ven if all of the embodiments discussed in the patent included a specific limitation, it would not be proper to import from the patent’s written description limitations that are not found in the claims themselves.” (internal quotations omitted)); see also SuperGuide Corp. v. DirecTV Enters., Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). Patent Owner’s assertion that the ’379 provisional application and the ’784 patent both describe evaluating the statistical similarities of calibration data (PO Resp. 10, 20) also fails to provide a sufficient reason to import a requirement to evaluate the calibration data into the construction of “grid point” or “non-uniform grid point.” Similarly, Patent Owner’s assertion that is “of great importance” because it is fundamental to generating the grid points is unpersuasive. See PO Resp. 27. Even describing evaluation as being “of great importance” is an insufficient basis for importing a requirement for evaluation. See Texas Instruments, Inc. v. U.S. Int’l Trade Comm’n, 805 F.2d 1558, 1563 (Fed. Cir. 1986) (“[The Federal Circuit] has cautioned against limiting the claimed invention to preferred embodiments or specific examples in the specification.”).” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We agree with Petitioner. The pertinent disclosure from Shkedi reads: Simply stated, if a mobile telephone (at a user selected location) measures a plurality of service antenna signals and stores these with their respective service antenna identifications, then that mobile telephone (or an equivalent unit) upon observing an identical list of service antennas with substantially identical respective signal strengths—can reasonably conclude that it is within a predetermined proximity of the original user selected location. Ex. 1006, 8:41–48. Here, we find that the language “within a predetermined proximity of the original user selected location” refers to an area around the original user selected location. In other words, “within a predetermined proximity of the original user selected location” discloses that, instead of being exactly at the original user selected location, the mobile telephone Indeed, in acknowledging “that Shkedi assumes the user is within some ‘predetermined’ distance of [the original user selected] location” (PO Resp. 33), Patent Owner effectively confirms this interpretation of Shkedi’s disclosure. That is, being within some predetermined distance of the original user selected location is equivalent to being within a circle centered on the original user selected location and having a radius equal to the predetermined distance. That Shkedi allegedly only “assumes” that the user is within the predetermined distance of the original user selected location does not detract from the fact that Shkedi’s disclosure of “within a predetermined proximity of the original user selected location” describes an area around the original user selected location.” slip op. at 34
Patent outcomesUS 7,561,104 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,561,104
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.