- Tanklogix, LLC v. SiteproInstitution deniedPTAB · Oct 10, 2025 · IPR2025-00650 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 18–32 and 34 were unpatentable over Kahn or Kahn and Gutierrez.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’871 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 18–32 and 34 of the ’871 patent.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The respective proposed levels of qualifications for a person of ordinary skill in the art are similar, with Patent Owner proposing two years of experience compared to Petitioner proposing significant experience with remotely controlling fluid-handling devices, like SCADA systems. Patent Owner also proposes more extensive experience in lieu of educational experience. While we find Petitioner’s proposed qualifications to be acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of skill necessary to understand and implement the teachings of the ’871 patent and the asserted prior art. Our analysis and findings herein, however, do not turn on any differences in the qualifications adopted.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“actuators and the remote control of fluid handling devices, including the receipt with the user-interface module of “a user command to actuate an actuator via a presented control interface” (limitation [18.7]) and “account authorized to send commands to remotely control fluid handling devices” (limitation [18.11]). We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses or teaches these limitations because the evidence does not provide support that there is remote control of fluid handling devices or the use of a user command on a control interface to send a command to a fluid handling device, for instance. Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but we do not discern that it teaches or discloses the capability to remotely control fluid handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, the Kahn disclosures that Petitioner repeatedly relies upon for allegedly teaching this control are deficient. See Ex. 1005, 10:62–67, 14:35– 15:2, 15:62–16:32; see also Pet. 12–14, 16–18. Kahn discloses that “the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance.” Ex. 1005, 10:62–67. Communication unit 112B is part of the local “sensor unit,” wherein the detection conditions determined by the sensor are communicated to remote devices by communication unit 112B. See id. at 3:31–33, 5:62–6:2, 6:27–35, 7:33–37, 13:7–12, Figs. 1A–1C. Kahn discloses that the sensor units, which include communication units 112B, can be located near shut-off valves and can communicate with distant locations. See id. at 11:1–13. There are no disclosures, however, in the above passages that there is remote control of fluid handling devices, that there is a user command on a control interface that actuates an actuator, or that there is a command sent to the facility actuators via a network connection, as required in limitations [18.5]–[18.7] and [18.9]–[18.12], respectively. Rather, the disclosure indicates that the communication unit 112B includes on-site alerts and that the local (non-remote) communication unit 112B can be interfaced with the control valve.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,488,871 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Mobileye Global, Inc. v. Facet Technology Corp.Rehearing deniedPTAB · Apr 22, 2025 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Rehearing
The Board denied Patent Owner’s rehearing request, leaving institution in place on claim 15 based on the Gallagher–Lumia obviousness challenge.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“II. STANDARD OF REVIEW A party requesting rehearing bears the burden of showing that the decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id. When reconsidering a decision on institution, we review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors. Star Fruits S.N.C. v. United States, 393 F.3d 1277, 1281 (Fed. Cir. 2005); Arnold P’ship v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“or overlooked any matter. As we explained in the Institution Decision, the ’255 patent discloses that the recited characterization profile allows the system to convert the intensity values measured by the intensity sensor into luminance values based on the sensor’s ability to sense the particular color of the measured light. Inst. Dec. 21; Ex. 1001, 11:41–48. The ’255 patent states that “the light intensity sensor’s 280 ability to sense . . . a particular color” is the “the light intensity sensor’s 280 profile for [that] particular color.” Ex. 1001, 11:45–47. The ’255 patent further states that this “[l]ight intensity sensor 280 characterization is essential for high precision computations.” Id. at 11:48–49. Thus, as we stated in the Institution Decision, the recited “characterization profile” refers to a conversion factor used to convert the measured light intensity into luminance. As this conversion factor is based on the light intensity sensor’s ability to sense the particular color of light reflected by the road sign, we agree that it is empirical information. Patent Owner fails to explain adequately how the fact that the ’255 patent discloses storing multiple conversion factors for multiple colors of measured light in a digital look-up-table (see id. at 11:56–59 (“The light intensity sensor characterization 275 is empirical information about the light intensity sensor 280 that is used to create the [look-up table] 475.”)) has any bearing on our interpretation.” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Owner to the Institution Decision where we fully addressed Patent Owner’s contentions. See Inst. Dec. 29–31. As we explained, “Petitioner proposes to incorporate Lumia’s teaching of measuring luminance values into Gallagher’s system, and argues that an ordinarily skilled artisan would have had a reasonable expectation of success given Gallagher’s disclosure of determining calibration factors for each individual sensor in the array of sensors.” Id. at 30. In other words, Petitioner proposes to use Gallagher’s array of sensors to measure luminance in the manner taught by Lumia. We also explained in the Institution Decision how Lumia discloses using a video camera to measure the luminance of a road sign. Id. at 27–29. We further explained that, in the Petition, “Petitioner sets forth reasoning with rational underpinning to support its contentions that it would have been obvious to combine the teachings of Gallagher and Lumia” by, for example, “argu[ing] that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels.” Id. at 30–30 (citing Pet. 46). We further explained that Petitioner’s arguments were supported by the testimony of it witness, Dr. Thorpe. Id. at 31 (citing Ex. 1003 ¶ 116).” slip op. at 7
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,335,255 - Samsung Electronics America, Inc. / Samsung Electronics Co., Ltd. v. Collision Communications, Inc.Institution deniedPTAB · Mar 21, 2025 · IPR2024-01248 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood of proving claims 1–11, 16, and 21 unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’071 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes a specific construction of any claim term, although Petitioner contends each term should be construed according to its plain and ordinary meaning. Pet. 16; see generally Prelim. Resp. Accordingly, we need not construe any claim terms expressly because the meaning of the terms is not in dispute and an express construction is not necessary to resolve the controversy before us.” slip op. at 13
- BurdenNot shown unpatentable
“We find the Petition lacking in particularity because it does not clearly identify what aspect of Jin is alleged to teach the unique signal parameters (or unique estimated signal parameters) recited in claim 1. See, e.g., 35 U.S.C. § 312(a)(3) (“A petition filed under section 311 may be considered only if — (3) the petition identifies, in writing and with particularity, . . . the evidence that supports the ground for the challenge to each claim . . . .”). First, as reflected above, the Petition asserts that something called a “unique pilot parameter” teaches the recited unique estimated signal parameters. But “unique pilot parameter” is not a term or phrase recited in Jin. See Prelim. Resp. 19 (arguing the same). So, when Petitioner states “Jin discloses that the base station uses the unique pilot parameter (i.e., ‘unique estimated signal parameters’) to ‘identify which user (i.e., mobile terminal) has transmitted the received data,’” it is not clear what element in Jin Petitioner intends to identify by the term “unique pilot parameter.” Dr. Min’s testimony does not help resolve the ambiguity in the Petition. In particular, Dr. Min also refers to a “unique pilot parameter (i.e., ‘unique signal parameter’) for each user.” Ex. 1003 ¶ 89. But, as noted above, Jin does not disclose an element referred to as a “pilot parameter” and it is not clear what element Dr. Min intended to identify in Jin.8” slip op. at 18
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,814,071 - PTAB · Mar 5, 2025 · IPR2024-01111 · APJ Sean P O’Hanlon · IPR · Institution
The Board instituted IPR of claims 1–16 on all asserted grounds, finding a reasonable likelihood that claims 1 and 9 would be obvious over Gallagher and Schofield.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“Texas litigation, but significant work still remains to be done. See Ex. 2004. Moreover, we agree that Petitioner filed the Petition expeditiously. See 2nd Prelim. Reply 4. Accordingly, the facts underlying this factor weigh strongly against exercising our discretion to deny institution.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“h. Conclusion Accordingly, at this stage of the proceeding, we determine that Petitioner has established a reasonable likelihood of prevailing on its assertion that claim 9 would have been obvious in view of the combination of Gallaher and Schofield.” slip op. at 32
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither party proposes a definition for any claim term. See Pet. 6; Prelim. Resp. 4–5. For purposes of this Decision, and based on the record before us, we determine that no construction of any term is necessary. We note that this determination does not preclude the parties from arguing their proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that claim construction, in general, is an issue to be addressed at trial. A final determination as to claim construction will be made at the close of the proceeding, after any hearing, based on all the evidence of record. The parties are expected to assert all of their claim construction arguments and evidence during the trial as permitted by our rules. slip op. at 19
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner has not advanced persuasive evidence to put into dispute Petitioner’s identification of itself as the sole real party in interest. Patent Owner asserts that the two third parties it seeks to add as defendants in the Texas Litigation produce products that incorporate components manufactured by Petitioner and that Patent Owner has asserted that these Petitioner products infringe the ’328 patent in the Texas Litigation. Prelim. Sur-reply 4–5. Patent Owner also asserts that these two third parties asserted an obligation to defend Petitioner and the other third party against Patent Owner’s infringement assertions. Id. at 5. However, Patent Owner does not assert or provide any evidence that Petitioner must indemnify any of the three third parties or that any of the third parties controls any aspect of this inter partes review proceeding. See id. Moreover, Petitioner stipulates that, if we institute inter partes review in this proceeding, it will not pursue in the Texas Litigation “‘any ground that [Petitioner] raised or reasonably could have raised’ during this proceeding.” Prelim. Reply 4 (alteration in original) (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential in relevant part)). Furthermore, to the extent that the two parties Patent Owner seeks to add as defendants in the Texas Litigation should be named as real parties in interest in this proceeding, those parties have also filed a stipulation here (see Ex. 1024), alleviating any concerns of conflict with district court litigation.” slip op. at 14
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,671,328 - PTAB · Mar 5, 2025 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Institution
The Board instituted IPR of claim 15 based on Gallagher and Lumia, finding a reasonable likelihood that the combination renders the claim obvious.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“7. Holistic Assessment of the Fintiv Factors On this record, after weighing all of the factors and taking a holistic view, we determine that the facts in this case that weigh against exercising discretion outweigh the facts that favor exercising discretion. Accordingly, we determine that the circumstances presented weigh against exercising our discretion under 35 U.S.C. § 314(a) to deny institution of inter partes review based on the Texas litigation.” slip op. at 16
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“dispute Petitioner’s identification of itself as the sole real party in interest. Patent Owner asserts that the two third parties it seeks to add as defendants in the Texas Litigation produce products that incorporate components manufactured by Petitioner and that Patent Owner has asserted that these Petitioner products infringe the ’255 patent in the Texas Litigation. Prelim. Sur-reply 4. Patent Owner also asserts that these two third parties asserted an obligation to defend Petitioner and the other third party against Patent Owner’s infringement assertions. Id. However, Patent Owner does not assert or provide any evidence that Petitioner must indemnify any of the three third parties or that any of the third parties controls any aspect of this inter partes review proceeding. See id. Moreover, Petitioner stipulates that, if we institute inter partes review in this proceeding, it will not pursue in the Texas Litigation “‘any ground that [Petitioner] raised or reasonably could have raised’ during this proceeding.” Prelim. Reply 4 (alteration in original) (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential in relevant part)). Furthermore, to the extent that the two parties Patent Owner seeks to add as defendants in the Texas Litigation should be named as real parties in interest in this proceeding, those parties have also filed a stipulation here (see Ex. 1024), alleviating any concerns of conflict with district court litigation.” slip op. at 14
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Accordingly, at this stage of the proceeding, we determine that Petitioner has established a reasonable likelihood of prevailing on its assertion that claim 15 would have been obvious in view of the combination of Gallagher and Lumia.” slip op. at 31
- Adverse judgmentAdverse judgmentOther
“Here, Patent Owner filed a statutory disclaimer of claims 12–14 and 17–23. Prelim. Resp. 1; Ex. 2002. Based on our review of Exhibit 2002, we determine that a disclaimer of claims 12–14 and 17–23 of the ’255 patent under 35 U.S.C. § 253(a) has been filed with the Office as of December 9, 2024. Based on the information in the public record, we find that the disclaimer complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Because claims 12–14 and 17–23 have been disclaimed under 35 U.S.C. § 253(a), in compliance with 37 C.F.R. § 1.321(a), we do not reach challenges to claims 12–14 and 17–23. As a result, the remaining challenged claim is claim 15 (“the challenged claim”).” slip op. at 7
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,335,255 - Howard Industries, Inc. v. Capsa Solutions LLCAll claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01274 · APJ Arthur M Peslak · IPR · Final written decision
Claims 3 and 4 are unpatentable: claim 3 as obvious over Clark, Manner, and Santoro; claim 4 as obvious over Clark and Manner.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“have at least a four-year college degree in mechanical engineering, biomedical engineering, industrial design, or a closely related field and at least one year of experience in product development and design for commercial workstations and work platforms.” Pet. 7 (citing Ex. 1004 ¶¶ 17–18). Petitioner further contends that “[a]dditional education could substitute for professional experience, and significant work experience could substitute for formal education.” Id. Patent Owner contends that a person of ordinary skill in the art “would have had a bachelor’s degree in a pertinent discipline involving mechanical product design, such as mechanical engineering, with 2-3 years experience in in [sic] the design, manufacture, or analysis of mechanical devices.” PO Resp. 18. Patent Owner alternatively argues that a person of ordinary skill in the art “with a 2-year mechanical engineering diploma and . . . 4-6 years of experience in in [sic] the design, manufacture, or analysis of mechanical components and devices.” Id. Patent Owner contends that “Petitioner submits a somewhat different, and broader, definition” of a person of ordinary skill in the art than Patent Owner’s definition because Petitioner’s definition includes industrial design which is a field that does not require the same level of hard sciences as Patent Owner’s definition. Id. Patent Owner further contends that “the Petition should be denied under either party’s definition of a [person of ordinary skill in the art] as Petitioner has failed to meet its burden of establishing a prima facie case of obviousness.” Id. at 18–19 (citing Ex. 2012 ¶¶ 45–47). We apply Petitioner’s level of ordinary skill in the art because it appears consistent with the problems addressed in the ’668 patent and the prior art. Our Decision would not be affected if we were to apply Patent Owner’s definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionOther
“We have considered the parties’ respective arguments concerning the construction of this claim term and, for the following reasons, we adopt Patent Owner’s construction of “compartment” as “an enclosed space for containing an item.” First, Petitioner does not dispute that it agreed to adopt Patent Owner’s construction in the district court proceeding between the parties. Pet. Reply 5; Tr. 8:14–21. Second, Petitioner cites to several Board Decisions in which the panels construed claim terms even though the parties agreed to constructions in parallel litigation and argues that the agreement between Petitioner and Patent Owner in the parallel district court proceeding has no bearing on this proceeding. Id. (citing Cook Grp. Inc. v. Cook Med. LLC, IPR2017-00135, Paper 7 at 7–8 (PTAB May 16, 2017); Arris Int’l PLC v. Sony Corp., IPR2016-00834, Paper 54 at 26–29 (PTAB Sept. 28, 2017); Apple Inc. v. VirnetX Inc., IPR2015-00810, Paper 44 at 18–19 (PTAB Aug. 30, 2016)). But, those cited decisions are not precedential and two of them were decided under the “broadest reasonable interpretation standard,” not the Phillips standard, thereby rendering a stipulation between the parties in district court less informative to the panels’ determinations. See Apple, IPR2015-00810, Paper 44 at 18; Cook Grp., IPR2017-00135, Paper 7 at 7. More importantly, given Petitioner’s agreement with Patent Owner’s construction in the district court, we see no reason to apply a different construction here simply because Petitioner proposed that construction prior to agreeing to the construction with Patent Owner in district court. Tr. 11:21–25.8” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that claims “are generally given their ordinary and customary meaning as understood by a person of ordinary skill in the art when read in the context of the specification and prosecution history.” Thorner, 669 F.3d at 1365. First, “when a patentee sets out a definition and acts as his own lexicographer” or second, “when the patentee disavows the full scope of a claim term either in the specification or during prosecution.” Id. (citing Vitronics Corp., 90 F.3d at 1580). In order for the patentee to act as his or her own lexicographer, the patentee must ‘clearly set forth a definition of the disputed claim term’ other than its plain and ordinary meaning . . . [i]t is not enough for a patentee to simply disclose a single embodiment or use a word in the same manner in all embodiments, the patentee must ‘clearly express an intent’ to define the term. Id. Further, in order to establish disavowal of claim scope, the specification must “make[] clear that the invention does not include a particular feature . . . even though the language of the claims, read without reference to the specification, might be considered broad enough to encompass the feature in question.” Id. As noted above, the underlying premise of Patent Owner’s proposed construction is that the language “disposed in” is broad enough to encompass compartments not “entirely in” or “contained in” the recited portion of the work platform.” slip op. at 17
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer not foundDecided for petitioner
“For the following reasons, we determine that the portions of the prosecution history of the ’650 patent relied on by Patent Owner do not “prov[e] the existence of a ‘clear and unmistakable’ disclaimer that would have been evident to one skilled in the art.” Trivascular, 812 F.3d at 1063– 64.14 Patent Owner argues that the prosecution history redefined the term forward “by disclaiming workstations that are mounted on top of or over the height adjustment mechanism.” PO Resp. 29. Claims 3 and 4 recite “a work platform including a work surface and compartments for containing items” not a “workstation.” It is unclear what Patent Owner is referring to as the “workstation,” i.e., the recited “work platform,” the recited “work surface,” or the combination of “work platform,” “work surface,” and the recited “compartments.” Patent Owner injects further ambiguity by rephrasing the disclaimer, as “Applicant explicitly disclaimed carts having work stations mounted entirely to the top of the height adjustment mechanism (e.g., carts like Clark and Reeder).” Id. at 30 (emphasis added). Regardless of these 14 Because of our determination that the requirements for a clear and unmistakable disclaimer are not met by the cited portions of the prosecution history of the ’650 patent, we need not and do not reach the question of relevance of the statements in the prosecution of the ’650 patent to the claims of the ’668 patent. ambiguities, Patent Owner misinterprets the statements in the prosecution history. The applicant’s primary argument was that an ordinarily skilled artisan would not have incorporated moveable work surfaces above the “compartment” of Clark. Ex. 1033, 137–38. The applicant’s arguments, thus, do not support Patent Owner’s argument here that “workstations” should not be mounted “over or on top of the height adjustment mechanism.” See id.” slip op. at 32
Patent outcomesUS 7,594,668 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,594,668 - Howard Industries, Inc. v. Capsa Solutions LLCAll claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01275 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–3, 5, 6, and 8 are unpatentable as obvious over Clark and Manner (claims 1–3, 5, 8) and Clark, Manner, and Hartman (claim 6).
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would have at least a four-year college degree in mechanical engineering, biomedical engineering, industrial design, or a closely related field and at least one year of experience in product development and design for commercial workstations and work platforms.” Pet. 8 (citing Ex. 1003 ¶¶ 17–18). Petitioner further contends that “[a]dditional education could substitute for professional experience, and significant work experience could substitute for formal education.” Id. Patent Owner contends that a person of ordinary skill in the art “would have had a bachelor’s degree in a pertinent discipline involving mechanical product design, such as mechanical engineering, with 2-3 years experience in in [sic] the design, manufacture, or analysis of mechanical devices.” PO Resp. 17–18. Patent Owner alternatively argues that a person of ordinary skill in the art “with a 2-year mechanical engineering diploma and . . . 4-6 years of experience in in [sic] the design, manufacture, or analysis of mechanical components and devices.” Id. at 18. Patent Owner contends that “Petitioner submits a somewhat different, and broader, definition” of a person of ordinary skill in the art than Patent Owner’s definition because Petitioner’s definition includes industrial design which is a field that does not require the same level of hard sciences as Patent Owner’s definition. Id. Patent Owner further contends that “the Petition should be denied under either party’s definition of a [person of ordinary skill in the art] as Petitioner has failed to meet its burden of establishing a prima facie case of obviousness.” Id. at 18–19 (citing Ex. 2012 ¶¶ 45–47). We apply Petitioner’s level of ordinary skill in the art because it appears consistent with the problems addressed in the ’668 patent and the prior art. Our Decision would not be affected if we were to apply Patent Owner’s definition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther
“i. “actuator” Petitioner contends in district court that the term “an actuator for controlling the driver” is indefinite for invoking means-plus-function claim language without providing corresponding structure. Pet. 9 (citing Ex. 1023, 36–40; Ex. 1024, 28–32). For the purposes of this proceeding, Petitioner adopts the construction Patent Owner presented in the district court, i.e., “a mechanism to activate or control equipment, e.g., by use of pneumatic, hydraulic, or electronic signals.” Id. at 10 (quoting Ex. 1012, 3–4). Patent Owner does not address this term in this proceeding. See generally PO Resp.; Sur-reply. Because it is uncontested in this proceeding, we apply Patent Owner’s construction from the district court proceeding as presented here by Petitioner.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningOther
“Although not dispositive to our Decision, we apply the plain and ordinary meaning of this term, which does not require the work surface to be curved.” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that claims “are generally given their ordinary and customary meaning as understood by a person of ordinary skill in the art when read in the context of the specification and prosecution history.” Thorner, 669 F.3d at 1365. First, “when a patentee sets out a definition and acts as his own lexicographer” or second, “when the patentee disavows the full scope of a claim term either in the specification or during prosecution.” Id. (citing Vitronics Corp., 90 F.3d at 1580). In order for the patentee to act of his or her own lexicographer, the patentee must ‘clearly set forth a definition of the disputed claim term’ other than its plain and ordinary meaning . . . [i]t is not enough for a patentee to simply disclose a single embodiment or use a word in the same manner in all embodiments, the patentee must ‘clearly express an intent’ to define the term. Id. Further, in order to establish disavowal of claim scope, the specification must “make[] clear that the invention does not include a particular feature . . . even though the language of the claims, read without reference to the specification, might be considered broad enough to encompass the feature in question.” Id. As noted above, the underlying premise of Patent Owner’s proposed construction is that the language “disposed in” is broad enough to encompass compartments not “entirely in” or “contained in” the recited portion of the work platform. We start our analysis with the claim language. Claim 1 recites “wherein the work platform includes a portion projecting, relative to the height adjustment mechanism, in a forward direction . . . the compartment is disposed in the portion of the work platform projecting in the forward direction.” Ex. 1001, 14:39–43. By reciting “a portion projecting, relative to the height adjustment mechanism,” the claim language implies that the entire work platform is not required to project in the forward direction. We also note that nothing in claim 1 requires any particular size of the compartment. The only recitation in the claim regarding location of the compartment is that it “is disposed in the portion of the work platform projecting in the forward direction,” but that language on its face does not require or suggest that the compartments are “entirely in” or only “contained in” the recited portion of the work platform. In other words, nothing in the claims expressly restricts the compartments from being disposed in the “portion” recited as well as another portion of the work platform that does not project in the forward direction. Turning to the Specification, Patent Owner does not direct us to any” slip op. at 18
Patent outcomesUS 8,215,650 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,215,650 - PTAB · Feb 13, 2025 · IPR2024-00978 · APJ Bart A Gerstenblith · IPR · Institution
The Board instituted IPR on claims 1–17 on all petition grounds, finding a reasonable likelihood that Dolan renders at least one challenged claim obvious.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“letter stipulating that if the Board institutes this IPR petition on the grounds presented therein, then Samsung will not pursue in the above-captioned litigation any grounds that were raised or reasonably could have been raised in the IPR. For the sake of clarity, this stipulation does not extend to co-petitioner Google, which is not a party to the above-referenced litigation.” slip op. at 7
- PTAB / AIA Trials › Real party in interest / privityNot reached
“Electronics, America, Inc.; and Google LLC as real parties in interest. Pet. 61. Petitioner explains that “Google LLC is a subsidiary of XXVI Holdings Inc., which is a subsidiary of Alphabet Inc.” Id. at 61 n.10. Petitioner asserts that “XXVI Holdings Inc. and Alphabet Inc. are not real parties-in-interest to this proceeding.” Id. Patent Owner identifies Cerence Operating Co. and Cerence, Inc. as real parties in interest. Paper 5, 1. Patent Owner disagrees with Petitioner, contending Alphabet Inc. is also a real party in interest. Id. At this stage of the proceeding, we need not determine whether Alphabet Inc. is a real party in interest to Petitioner since neither Petitioner nor Patent Owner has identified any effect that determination would have on the outcome of this proceeding. To the extent Patent Owner seeks to maintain this contention, it should raise the issue in its Patent Owner response.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not currently take a position on the relevant level of ordinary skill in the art, but believes that “the Board could assume Petitioner’s proposed level of ordinary skill for purposes of deciding whether to institute.” Prelim. Resp. 3. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested, proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’078 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may be instituted only if “the information presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons given below, on this record, Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one of the Challenged Claims. Accordingly, we institute an inter partes review of the Challenged Claims on all grounds raised in the Petition.” slip op. at 2
§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 7,395,078 - Samsung Electronics Co., Ltd. / Samsung Electronics, America, Inc. v. Cerence Operating CompanyInstitutedPTAB · Jan 31, 2025 · IPR2024-01267 · APJ Lisa A Murray · IPR · Institution
The Board instituted IPR on claims 1–3, 7–9, 12, and 13 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Arai and Fenwick.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“the PTAB will not discretionarily deny institution of an IPR . . . in view of parallel district court litigation where a petitioner stipulates not to pursue in a parallel district court proceeding the same grounds as in the petition or any grounds that could have reasonably been raised in the petition. Petitioner’s stipulation in Exhibit 1020 satisfies the language from the Director’s Memorandum quoted above. Therefore, we need not analyze each Fintiv factor before determining that we will not exercise our discretion to deny institution in view of the parallel Eastern District of Texas Litigation. In light of Petitioner’s stipulation, Patent Owner’s request is denied.” slip op. at 6
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“any evidence of objective indicia of nonobviousness. We conclude that on balance, considering the record presently before us, Petitioner has established a reasonable likelihood of showing that the differences between the subject matter of claim 1 and the teachings of Arai and Fenwick are such that the subject matter, as a whole, would have been obvious at the time of the invention to a person having ordinary skill in the art. e. Summary as to Claim 1 For the reasons discussed above, on the present record we find that Petitioner has established a reasonable likelihood that it would prevail in showing that the combination of Arai and Fenwick teaches or suggests each element of claim 1 of the ’428 patent. See 35 U.S.C. § 314(a).” slip op. at 27
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested, proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’428 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Relying on the Declaration of Jean Renard Ward, Petitioner contends that “[a] POSITA would have been motivated to incorporate[] Fenwick’s teachings regarding automatically sending recognized words to an application into Arai because this would have furthered Arai’s purpose of having a natural, uninterrupted flow in entering characters without having to press extra keys.” Pet. 31–32 (citing Ex. 1002 ¶ 139). Petitioner concludes that the combination would have been obvious in that it would apply Fenwick’s known technique for recognizing words without additional user confirmation to Arai’s known method of performing handwriting recognition, ready for improvement, to yield the predictable result of the Arai/Fenwick combination: “recognition results are sent to an application without further user confirmation—e.g., pressing the Enter Key—and handwritten character recognition results are removed from the temporary memory such as RAM when the recognition results are sent to the application.” Id. at 32 (citing Ex. 1002 ¶ 140).” slip op. at 18
§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,026,428
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.