- Apple Inc. v. Resonant Systems, Inc.All claims unpatentablePTAB · Oct 9, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Final written decision
Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionTerm construed board ownMixed
“supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.10 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs configured to operate a switch or other circuit; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law that limits the structure to that necessary to 10 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:7–10. perform the claimed function. 11 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“The record, including testimony by Dr. Hannaford (Ex. 1003; Ex. 1049), supports Petitioner’s rationale, and shows that one of ordinary skill would have been motivated to combine Gregorio, Ramsay, and Wakuda in the manner proposed. Patent Owner does not address Petitioner’s showing for combining these references with any particularity. See generally PO Resp. We discuss below Patent Owner’s argument that Petitioner’s showing as to limitation 2.f based on the combination of Gregorio and Ramsay is conclusory.” slip op. at 34
Patent outcomesUS 8,860,337 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,860,337 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - PTAB · Oct 3, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Institution
The Board instituted IPR of claims 2 and 3 on all grounds in the Petition and granted Nintendo’s motion to join IPR2024-00807, subject to participation limits.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“II. ANALYSIS A. Institution of Inter Partes Review We instituted an inter partes review in the Apple IPR on all challenged claims and all asserted grounds of unpatentability. Apple IPR, Paper 10 (institution decision); see also Apple IPR, Paper 2 (the “Apple Petition”). Petitioner here challenges the same claims and asserts the same grounds of unpatentability as those on which we instituted the Apple IPR. Compare Pet. 2, with Apple Petition 1; see also Mot. 1 (asserting the instant “Petition is substantively identical to Apple Inc.’s petition (‘Apple Petition’) in the Apple IPR, including that it relies on the same expert declaration,” and asserting “the same grounds presented in the Apple IPR”). As indicated, Petitioner also relies on the same declarant as did the petition in the Apple IPR. Mot. 1; compare Ex. 1003 (Hannaford Declaration), with Apple IPR, Ex. 1003 (same). Because the grounds of unpatentability in the instant Petition are identical to those in the Apple IPR and for the same reasons stated in our Decision to Institute in the Apple IPR, we institute inter partes review in this proceeding on the grounds presented in the Petition. See Apple IPR, Paper 10 (analyzing challenges in the Apple Petition).” slip op. at 7
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“We determine that Petitioner has met its burden of showing that joinder is appropriate because, as set forth above, the Petition (1) is substantially identical to the Apple Petition, (2) contains the same grounds based on the same evidence, and (3) relies on the same declaration, the Hannaford Declaration (Ex. 1003). Mot. 1, 4. Petitioner represents that “joinder will not negatively impact the Apple IPR trial schedule” and “expressly consents to the existing trial schedule.” Id. at 10; see also id. at 7 (“Proceeding with a consolidated inter partes review would avoid potential inconsistency, promote efficient review of the same claims for the same patent under the same grounds, and would result in a final written decision without delay.”). Petitioner also represents that as “long as Apple remains in the joined IPR, Nintendo remains in a limited ‘silent understudy’ role that does not actively participate in the IPR.” Id. at 8. The record supports Petitioner. In addition, the final written decision in the Apple IPR is due to issue on or before October 15, 2025, with the Oral Hearing complete and no further briefing due. See IPR 2024-00807, Paper 15 (Oral Hearing Transcript); Paper 18, 2–3. Therefore, as Petitioner argues, joinder by Petitioner will have little or no impact on the trial schedule in the Apple IPR. On the other hand, if the Board denies joinder, Petitioner submits that it “intends to file a separate petition for IPR (‘Second Petition’) that includes grounds in addition to some (or all) of the grounds in the Apple IPR.” Mot. 14.” slip op. at 10
NonePatents in suitUS 8,860,337 - PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027 - Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentablePTAB · Aug 13, 2025 · IPR2024-01469 · APJ Steven M Amundson · IPR · Final written decision
Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not determined unpatentable under the asserted prior-art grounds.
RulingsFinal written decision- PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32
- Skill levelOther
“C. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the ’336 patent’s effective filing date would have had “a bachelor’s degree in mechanical engineering, electrical engineering, optics, or physics with at least three years of experience working in the design of LED lights or lighting fixtures; a master’s degree in one of the above disciplines with at least two years of experience; or equivalent experience.” Pet. 14 (citing Ex. 1004 ¶¶ 26–29). Dr. Eden’s testimony supports Petitioner’s assertion. See Ex. 1004 ¶¶ 27–28. Patent Owner “adopts for purposes of this proceeding only” Petitioner’s description of an ordinarily skilled artisan. Resp. 10 (citing Pet. 14). We adopt Petitioner’s description of an ordinarily skilled artisan because it comports with the technology and claims of the ’336 patent as” slip op. at 40
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner
“Alleged Objective Indicia of Nonobviousness (i) General Principles Before reaching a conclusion about obviousness, we consider evidence concerning objective indicia of nonobviousness. See Apple, 839 F.3d at 1048. For such evidence to have substantial weight, “its proponent must establish a nexus between the evidence and the merits of the claimed invention.” ClassCo, Inc. v. Apple, Inc., 838 F.3d 1214, 1220 (Fed. Cir. 2016); see Ancora Techs., Inc. v. Roku, Inc., 140 F.4th 1351, 1361 (Fed. Cir. 2025) (noting that the Board did not err by requiring “a nexus to the challenged claims as opposed to the patent as a whole”). “[T]here is no nexus unless the evidence presented is ‘reasonably commensurate with the scope of the claims.’” ClassCo, 838 F.3d at 1220 (quoting Rambus Inc. v. Rea, 731 F.3d 1248, 1257 (Fed. Cir. 2013)). The patentee “bears the burden of showing that a nexus exists.” WMS Gaming, Inc. v. Int’l Game Tech., 184 F.3d 1339, 1359 (Fed. Cir. 1999). A rebuttable presumption of nexus arises “when the patentee shows that the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). Whether a rebuttable presumption of nexus arises “turns on the nature of the claims and the specific facts.” Teva Pharms. Int’l GmbH v. Eli Lilly & Co., 8 F.4th 1349, 1362 (Fed. Cir. 2021). The presumption analysis should consider the unclaimed features in the product tied to the objective evidence to assess their significance and impact on the correspondence between the patented invention and the product. Quanergy Sys., Inc. v. Velodyne Lidar USA, Inc., 24 F.4th 1406, 1418 (Fed. Cir. 2022). When, “for example, the patented invention is only a small component of the product tied to the objective evidence, there is no presumption of nexus.” Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1333 (Fed. Cir. 2019). Absent a presumption of nexus, the patentee may prove nexus by” slip op. at 76
Patent outcomesUS 10,299,336 mixed§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,299,336 - Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentablePTAB · Aug 13, 2025 · IPR2024-00101 · APJ Steven M Amundson · IPR · Final written decision
Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not shown unpatentable under the asserted grounds.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we” slip op. at 32
- PTAB / AIA Trials › §315(b) time barDecided for patent owner
“III. WHETHER THE PETITION IS TIME BARRED The parties dispute whether the Petition is time barred based on a” slip op. at 18
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“vacated the panel’s decision denying institution. Paper 12, 6. Among other things, the Director determined based on a “review of the current record” that (1) Menard is not a real party in interest in this proceeding and (2) Menard is not a privy of Petitioner. Id. at 5. Further, the Director remanded the case to the panel and instructed the panel “to determine whether the Petition presents a reasonable likelihood of prevailing with respect to at least one of the challenged claims under 35 U.S.C. § 314(a), and to determine whether to institute inter partes review accordingly.” Id. at 5–6.” slip op. at 3
- BurdenMixed
“U.S. Patent No. 10,299,336 B2 (“the ’336 patent”) (Exhibit 1001). For the reasons explained below, a preponderance of the evidence shows that claims 1–7, 9–15, and 18–20 in the ’336 patent are unpatentable and does not show that claims 8, 16, and 17 are unpatentable. See 35 U.S.C. § 316(e) (2024).” slip op. at 2
Patent outcomesUS 10,299,336 mixed§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,299,336 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00371 · APJ Brian D Range · IPR · Institution
The Board instituted IPR on claims 1–25 based on all petitioned grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–25 of the ’227 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’227 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“35 U.S.C. § 103(a) as obvious over Takagi and Cornette, citing the Declaration of Dr. Miles for support. Pet. 1, 6–49 (citing Ex. 1003) (Petitioner’s Ground 1A). a. Claim 1 Petitioner argues that Takagi and Cornette teach or suggest each recitation of claim 1. Pet. 6–31. Petitioner argues, for example, that the preamble of claim 1 is not limiting or, alternatively, imparts no structural distinction from Takagi. Id. at 20–23 (citing, e.g., Ex. 1003 ¶ 48). Petitioner further argues that Takagi and Cornette teach forming or hot stamping to arrive at their products. Id. at 23 (citing, e.g., Ex. 1016 ¶ 36 (Takagi referring to “form[ing]” its products shape); Ex. 1014, 9–11 (Cornette referring to “hot stamping”); Ex. 1003 ¶ 48. Petitioner argues that Takagi teaches a strip of base steel having a first and second side. Id. at 23–24 (citing, e.g., Ex. 1003 ¶ 49; Ex. 1016 ¶¶ 13, 36. Petitioner argues that Takagi teaches a coating that is a “diffusion layer” having five phases as depicted by Takagi Figure 2A and explained by Takagi Table 1 (Takagi Fig. 4). Id. at 24–30 (citing, e.g., Ex. 1003 ¶¶ 50–59; Ex. 1016 ¶ 20, Fig. 2A). Petitioner argues that Takagi alone or as modified by Cornette teaches a coating thickness greater than than 30 µm. Id. at 30–31; Ex. 1014, 9; Ex. 1016 ¶ 35; Ex. 1003 ¶¶ 60–61. Petitioner explains why a person having ordinary skill in the art would have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 31–47; Ex. 1016 ¶¶ 19–37, 47; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13; Ex. 1055 ¶¶ 2, 7, 14–15, 18, Fig. 3). Based on our review and consideration of the current record, we determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–31. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 would have been obvious over Takagi and Cornette.” slip op. at 12
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00370 · APJ Brian D Range · IPR · Institution
The Board instituted IPR of claims 1–30 on all twelve asserted obviousness grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–30 of the ’602 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’602 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200” slip op. at 9
- BurdenInstituted
“determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–33. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 is obvious over Takagi and Cornette.” slip op. at 12
Claim constructioncites KSR · GrahamPatents in suitUS 10,961,602 - PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,686,562
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.