• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Mediatek Inc. v. Parkervision, Inc.All claims unpatentable
  PTAB · Mar 31, 2026 · IPR2025-00030 · APJ Barry L Grossman · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious over the combinations in Grounds 1A–1C and 2A–2C.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “stated by Patent Owner. Ex. 2001 ¶ 25. This proposed level of skill is nearly identical to that proposed by Petitioner. Unlike Dr. Larson, however, Dr. Ricketts states his “opinion,” without stating the facts, data, or factors that he considered in reaching his opinion. Accordingly, we give his testimony little probative weight. 37 C.F.R. § 42,65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). For purposes of this Decision, based on the prior art, the sophistication of the disclosed technology in the ’593 patent, and Dr. Larson’s testimony, we adopt Petitioner’s definition of the level of ordinary skill, which is that a person of ordinary skill in the art would have had: at least a bachelor’s degree in electrical engineering or a related subject and two or more years of experience in the field of RF circuit design and/or power supplies for RF circuits, or at least five years of work experience and training in the design and development of RF circuits and/or power supplies for RF circuits. Less work experience may be compensated by a higher level of education, such as a master’s degree.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “on the construction of the claim term “power efficiency,” we agree with Petitioner and its declarant, Dr. Larson, that a person of ordinary skill (i.e., a degreed engineer with two or more years of experience in the field of RF circuit design and/or power supplies for RF circuits) would have understood that to determine the power efficiency of a circuit, one would measure the components or characteristics of power, such as voltage and current, to determine the output power of the power supply compared to its input power. Based on our construction of the claim term “power efficiency,” we also note that the claims only require performing a bypass function when the efficiency threshold is exceeded. The claims do not require a power efficiency ratio to be measured or calculated. Thus, we decline Patent Owner’s attempt to limit the claim term “power efficiency” to a ratio.” slip op. at 30

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Section II.D.2 of this decision), Hau teaches a bypass controller 74 (purple) which receives a signal Pdet from a power detector (pink) and activates a bypass switch 72 (purple) when the signal Pdet exceeds a predetermined threshold (in response to a power efficiency of the power supply exceeding a predetermined threshold). Id. at 28 (citing Ex. 1007, 5:43–51, 6:57–7:20). According to Petitioner Hau discloses that the strength of the signal Pdet, the power output of the amplifier PA1, and the supply voltage Vcc2 are all proportional. Id. at 29 (citing Ex. 1007, 6:22–44; Ex. 1003 ¶¶ 122–123. Petitioner concludes, therefore, that Pdet is an indicator of the power output by the DC-DC buck regulator at Vcc2. Id. Petitioner also concludes that because input power is supplied to the DC-DC buck regulator from a fixed voltage, Pdet is also an indicator of the power efficiency of the DC-DC buck regulator because higher power indicated at Pdet indicates greater efficiency relative to the fixed input power. Pet.29 (citing Ex. 1003 ¶ 123). Dr. Larson’s testimony supports Petitioner’s conclusions. Petitioner also asserts: when Pdet exceeds the predetermined threshold, Hau’s bypass controller 74 activates bypass switch 72 and deactivates the DC- DC converter (which is a PWM switching device in the combination of Hau and Yoshida) (deactivates the switching device) to pass the input voltage directly to the output voltage Vcc2 (passes the input voltage to the output voltage node). Pet. 30 (citing Ex. 1007, 5:44-51, 6:61, 66; Ex. 1003 ¶¶ 125-126).” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightUnpatentableMotivation foundUnpatentable

    “According to Petitioner, it would have been obvious to a person of ordinary skill “to set Hau’s predetermined threshold to correspond to the point at which a fixed power supply (e.g., the bypass pathway of Hau) becomes more efficient than the down-converted power supply, as taught by Sahu.” Pet. 50–51 (citing Ex. 1007, 6:63–66; Ex. 1003 ¶¶ 166–167). Petitioner also asserts a person of ordinary skill “would have recognized that Sahu’s efficiency graph shows performance for a particular modulation scheme”, and that the resulting efficiency of the system using that modulation scheme “correlates with the efficiency of the communication waveform in that scheme (based on a communication waveform efficiency).” Id. at 51 (citing Ex. 1003 ¶ 168). Petitioner concludes that a person of ordinary skill “would have understood and found it obvious that basing the predetermined threshold of Hau on the point where a fixed power supply becomes more efficient as taught by Sahu is programming the threshold voltage based on a communication waveform efficiency.” Id. at 51 (citing Ex. 1003 ¶ 168). We find Petitioner’s contentions persuasive. Patent Owner asserts it is “hindsight” to rely on Sahu. PO Resp. 51 (a person of ordinary skill “would not have equated Sahu’s fixed-supply system with Hau’s bypass pathway without the benefit of hindsight”). According to Patent Owner, “Petitioner used the disclosures in the ’593 patent as a road map for reasons to combine Sahu and Hau/Yoshida.” Id. (citing Ex. 2001, ¶¶ 174–75). Patent Owner also asserts a person of ordinary skill “would have recognized that Figure 8(a) of Sahu “relates to specific devices that were tested in Sahu.” Id. at 50. We find these assertions unpersuasive. We have discussed above the” slip op. at 57

  Patent outcomesUS 8,498,593 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,498,593
• Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentable
  PTAB · Mar 16, 2026 · IPR2024-01378 · APJ John G New · IPR · Final written decision

  Claims 1–10 are unpatentable as anticipated by Svihra or obvious over the asserted combinations; the cited non-patent references qualify as printed publications.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Legal Standards Anticipation A claim is unpatentable as anticipated under 35 U.S.C. § 102 only when “every element and limitation of the claim was previously described in a single prior art reference, either expressly or inherently, so as to place a person of ordinary skill in possession of the invention.” Sanofi-Synthelabo v. Apotex, Inc., 550 F.3d 1075, 1082 (Fed. Cir. 2008). However, a reference may inherently anticipate if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). The “very essence of inherency is that one of ordinary skill in the art would recognize that a reference unavoidably teaches the property in question.” Agilent Technologies, Inc. v. Affymetrix, Inc., 567 F.3d 1366, 1383 (Fed. Cir. 2009).” slip op. at 8

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “(citing In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004)). Of particular relevance to the case presently before us is the VidStream court’s holding that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” VidStream, 981 F.3d at 1065. Hulu addressed, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. IPR2018-01039, Paper 29 at 8. In Hulu, the Board held that, although testimonial evidence is one way to prove public accessibility, there are also various indicia of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at 18. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established. Id. at 19–20 (see Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)). Here, we find the totality of evidence supports the conclusion that Petitioner has made a sufficient showing that Svihra and Amarenco (as well as the other identified non-patent references) were printed publications, and publicly accessible, prior to the ’477 patent’s priority date. We note at the outset that Patent Owner does not allege that any contested reference is fabricated, or a counterfeit document, but only that Petitioner has not set forth sufficient facts establishing that such references were published and available. Resp. 4. Svihra bears sufficient indicia of publication to conclude it was a printed publication and publicly accessible as of 2002. Ex. 1004. First, it appears on its face to be a legitimate scientific journal article; it indicates it was included at pages 480–83 in volume 103 (No. 12) of Bratisl Lek Listy, the Bratislava Medical Journal, which was established in 1921. The article identifies that it was received for publication on May 30, 2002, and accepted for publication on December 9, 2002; and multiple means of contact for the author and publisher are provided. Id. at 480, 483. Each of these indicia supports the contention that Svihra was published and publicly available in 2002. There is no direct evidence that Svihra was publicly accessed as of this date, but the article is cited as a reference in each of Exhibits 1085–1087, which further supports that Svihra was, generally, publicly available to interested individuals of ordinary skill in the art, which further corroborates that it was a published and publicly accessible publication. Having an established publisher also creates a presumption of publication for Svihra, which has not been rebutted by Patent Owner. VidStream, 981 F.3d at 1065.” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Petitioner also explains why a person of ordinary skill would have been motivated to combine the cited references, again citing specific disclosures from the references, and the supporting testimony of Dr. Wingeier. See Pet. at 27–28. Based on our review of Petitioner’s arguments and the evidence of record, we determine that Petitioner has established, by a preponderance of the evidence, that the cited references teach or suggest all of the limitations of challenged claim 1, and that Petitioner has established why a person of ordinary skill would have been motivated to combine the references, as proposed, with a reasonable expectation of success, for the reasons advocated by Petitioner with respect to Ground 2.” slip op. at 14

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “engineering, and at least two years of experience in the design and/or analysis of biomedical devices” and that “[a]dditional work experience could substitute for a formal degree and vice versa.” Pet. 14 (citing Ex. 1003 ¶ 21). Patent Owner does not dispute Petitioner’s proposal. See generally Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the challenged patent and the level of skill in the prior art, we adopt Petitioner’s proposed definition and additionally use the term “skilled artisans” to refer to people with such skill at the time the invention was filed.” slip op. at 10

  Patent outcomesUS 9,002,477 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 9,002,477
• Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentable
  PTAB · Mar 16, 2026 · IPR2024-01375 · APJ John G New · IPR · Final written decision

  Claims 1–13 are unpatentable as obvious under § 103 over Svihra, Mann, and Ponsford, and independently over Amarenco, Mann, and Ponsford.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “Ex. 1001, claim 1. In other words, to effectuate “direct” stimulation of the PTN nerve branch, a practitioner of the ’742 patent must: (1) non-invasively position an electrical stimulator relative to a portion of a patient’s body, such that a branch of a posterior tibial nerve within the first portion of the body is directly targeted by the electrical stimulator; (2) passing a current through the electrical stimulator; and (3) delivering an electrical stimulus from the electrical stimulator to the branch of the posterior tibial nerve such that the branch directly receives the electrical stimulation. Merely “placing electrodes over branches of the PTN” cannot be said, in and of itself, to “directly” target and stimulate the branches, as Petitioner argues.” slip op. at 12

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “of filing “would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices” and that “[a]dditional work experience could substitute for a formal degree and vice versa.” Pet. 21 (citing Ex. 1003 ¶¶ 20–21). Patent Owner does not dispute Petitioner’s proposal. See generally Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the challenged patent and prior art, we adopt this definition, and also use the term “skilled artisan” to refer to persons with such skill at the time the invention was filed.” slip op. at 13

  • Expert testimonyPetitioner expert creditedOther
  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “the evidence of record, that a person of ordinary skill in the art would have found it obvious to modify the teachings of Svihra by non-invasively stimulating a nerve branch of the PTN, e.g., the medial or lateral plantar nerves, as taught by Ponsford, to treat OAB/urinary incontinence. A skilled artisan would have understood that the fibers of a given branch of the PTN necessarily constitute a subset of the PTN fibers, stimulation of which is known to be effective in the treatment of OAB/urinary incontinence. See Ex. 1004, 480–481. Just as it was known in the art that stimulation of the much larger sacral nerve, of which the fibers of the PTN form a part, could have beneficial effects in the treatment of incontinence, and that stimulation of the PTN itself could have a similar effect (see Ex. 1084, col. 12, ll. 33–52), so, a skilled artisan could reason, might electrical stimulation of a branch of the PTN exert a similar effect. We also agree that a person of ordinary skill in the art would have been motivated to stimulate a smaller nerve branch of the PTN, rather than the entire PTN itself, so as to minimize undesirable side effects of stimulating the entire PTN, i.e., the recruitment of downstream muscular contraction, as taught by Mann. With respect as to whether a person of ordinary skill in the art would have had a reasonable expectation of success in the treatment of OAB/incontinence via stimulation of a branch of the PTN, rather than the entire PTN itself, we agree with Petitioner that a person of ordinary skill in the art, would understand from Mann that electrical stimulation of the larger, more central sacral nerve could be employed to treat OAB/urinary incontinence, and that a subset of those PTN fibers could be electrically stimulated to achieve a similar effect. See Ex. 1084, col. 12, ll. 33–52. Such a skilled artisan could similarly reason that a subset of those PTN fibers, i.e., a branch of the PTN, particularly major branches such as the plantar nerves, could also be similarly electrically stimulated to treat OAB/urinary incontinence. Although success in such an experiment would not be guaranteed, “only a reasonable expectation of success, not absolute predictability, is necessary for a conclusion of obviousness.” In re Longi, 759 F.2d 887, 897 (Fed. Cir. 1985).” slip op. at 46

  Patent outcomesUS 11,224,742 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,224,742
• Nxtgen Toys, LLC v. Zipstring, LLCAll claims unpatentable
  PTAB · Feb 20, 2026 · IPR2024-01213 · APJ Richard H Marschall · IPR · Final written decision

  Claims 1–4, 12, and 15–17 are unpatentable; substitute claim 27 is allowed, while substitute claims 21–26 and 28 are denied as obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person having ordinary skill in the art at the time of the invention “was typically a person with a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or other science or 6 Patent Owner does not rely on any objective indicia of nonobviousness in this proceeding. engineering based degree that [was] familiar with general principles of mechanics and aerodynamics with at least two years of experience in product design and development in the field of toys or other amusement type devices.” Pet. 32 (citing Ex. 1002 ¶¶ 2–6, 22–26). Patent Owner states that it submitted the following proposal for a POSITA in the related district court litigation: “[a POSITA] would have had at least a B.S. degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Industrial Design, Product Design, or similar field, with at least two years industry experience in one of these fields, and such POSITA would have been familiar with general principles of mechanics, fluid mechanics and aerodynamics.” PO Resp. 4–5. We note that the parties’ proposals overlap considerably, and neither party argues the inadequacy of the other party’s proposal or that any patentability issue in this case turns on the resolution of this issue. We find Petitioner’s definition consistent with the problems and solutions disclosed in the ’774 patent and prior art of record, and adopt it as our own. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). We would arrive at the same findings and conclusions in this Decision if we adopted Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner contends that no “term requires construction to resolve the invalidity grounds presented in this Petition since the prior art renders claims 1–4, 12, and 15–17 unpatentable under any reasonable interpretation of the claims.” Pet. 7. Patent Owner argues that it “does not believe express claim constructions are necessary during this proceeding because the claims can readily be given their ordinary and customary meaning in the context of the patent at the time it was filed.” PO Resp. 5. Based on the parties’ positions and our view of the record, we need not expressly construe any claim limitations to resolve the issues in this Decision. To the extent that any implicit claim construction issues relate to the issues raised by the parties, we address them in the context of the parties’ patentability arguments below.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “string, and that adding Scorch’s slot removes this arguably inconvenient process by allowing insertion and removal of a string without removing and reinstalling any aspects of the housing. See Pet 85–86 (citing Ex. 1002 ¶¶ 174–175; Ex. 1007, 3:30–3:53, 6:03; Ex. 1008, 3:46–4:45); Pet. Reply 18–20 (citing in part Ex. 2002 ¶ 187 (Dr. Janét’s testimony that Wagner’s removal and reinstallation of a cover “may be viewed as an inconvenient process”)). Making insertion and removal of the string easier and quicker provides a notable advantage over Wagner’s existing device. See id. Scorch itself supports this argument and the related expert testimony because it discusses insertion and removal of strings and stated that the slot allows a user to “swap them out really quick.” Ex. 1007, 3:30–53. Petitioner also persuasively argues that a POSITA would know how to add the slot while maintaining the proper operation of the device, such as allowing insertion and removal of the string and avoiding inadvertent exiting of the string from the device. See Pet. 86–87 (citing Ex. 1002 ¶¶ 175–176; Ex. 1007, 4:00–30, Ex. 1008, 2:49–52); Pet. Reply 19, 21 (citing Ex. 1002 ¶¶ 174–176). We find Petitioner’s arguments and reasoning in support of adding Scorch’s slot to Wagner’s housing straightforward and persuasive. Patent Owner’s arguments against the combination do not directly refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176).” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176). At best, Patent Owner’s arguments on this issue establish potential drawbacks in Petitioner’s proposed combination, but drawbacks alone do not defeat Petitioner’s obviousness rationale that includes readily apparent benefits. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”); Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine “). In addition, even if Patent Owner were correct that Wagner’s existing design works as well as Petitioner’s proposed combination, given all of the tradeoffs involved, that would not fatally undermine Petitioner’s showing. In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (obviousness does not require that the proposed combination “is the preferred, or most desirable, combination”). On this record, Petitioner’s (and Scorch’s) stated advantages that are achieved when adding Scorch’s slot to Wagner’s housing adequately support Petitioner’s motivation to combine rationale.” slip op. at 26

  Patent outcomesUS 11,674,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Nautilus
  Patents in suitUS 11,674,774
• Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco LimitedAll claims unpatentable
  PTAB · Feb 18, 2026 · IPR2024-01296 · APJ Barry L Grossman · IPR · Final written decision

  Claims 1–46 are unpatentable as obvious under § 103 over the asserted combinations of Chang, Fang, Yuen, Khalil, Park, and Chen.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that before the effective filing date of the claimed invention a person of ordinary skill in the art (“POSITA”) “would have had at least a bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment” and that “[m]ore education could substitute for experience and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s cited testimony supports Petitioner’s assertion.” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “[parent application to the application that matured into the ’380 patent], the Examiner construed the term ‘self-contained, in-bra wearable device’ to mean ‘complete, or having all that is needed, in itself’ and is capable of being worn in a bra.” Pet. 3 (citing Ex. 1005, 2290) (emphasis omitted). According to Petitioner, “PO did not dispute this construction, and Petitioner applies it herein.” Id. Petitioner also states that “[o]ther terms of the Challenged Claims should receive their plain and ordinary meaning, and no formal claim constructions are necessary in this proceeding because ‘claim terms need only be construed to the extent necessary to resolve the controversy.’” Id. (citing Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011); Ex. 1003 ¶¶ 69–70). Again, because Patent Owner did not file a Response, we exercise our discretion and look to Patent Owner’s Preliminary Response. We note that in the Preliminary Response Patent Owner states that “[f]or purposes of this Preliminary Response, no claim terms require construction to resolve the prior art grounds raised in the Petition.” Prelim. Resp. 19. According to specific construction, any such terms should be accorded their plain and ordinary meaning in light of the specification.” Id. Construction is needed only for those terms “that are in controversy, and only to the extent necessary to resolve the controversy.” See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). There are no claim terms in controversy. Accordingly, we need not construe any terms for our analysis.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Petitioner contends (Pet. 17) that a person of ordinary skill in the art “would have been motivated to implement Chang’s breast pump device as suggested by Fang” to achieve four benefits: (1) “to facilitate convenient cleaning and maintenance” (Pet. 19 (citing Ex, 1003 ¶ 102)); (2) “to facilitate more rapid assembly and disassembly (e.g., during use)” (id. at 20–21 (citing Ex. 1003 ¶ 105)); (3) “as a particularly effective and suitable option to generate negative” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “a breast pump device having “a diaphragm pump that generates negative air pressure.” Pet. 33; see also id. at 38. Petitioner explains Chang’s pump “generates suction by cyclical compression and decompression of a conduit or flex-tube, and expressly notes that other configurations were known and suitable.” Id. at 17 (citing Ex. 1007 ¶¶ 22, 25, 28, 68, 79, 84–86). Chang, however, does not mention, specifically, that Chang’s pump is a “diaphragm” pump. We note, however, that this claim clause does not state or require any specific type of pump. It merely requires a “pump.” Clause 1[e]/29[e], discussed below, however, does require a “diaphragm” pump. Petitioner here merely lays the foundation for this later clause by asserting that “Fang provides a straightforward suggestion of a diaphragm pump including a diaphragm housing component formed in a wall of the pump housing.” Id. at 18 (citing Ex. 1009 ¶¶ 24–25, Fig. 7; Ex. 1003 ¶ 97). Thus, Petitioner asserts, Fang teaches “an ‘air pump’ in pneumatic connection with the diaphragm that serves to generate negative air pressure,” and Chang teaches “the location of pump components (e.g., ‘motor’ [46]).” Pet. 33 (citing Ex. 1007 ¶¶ 72, 80, Fig, 6A; Ex. 1009 ¶¶ 19, 24). Petitioner then asserts that “the ‘air pump’ components of the combined device are positioned within the pump housing,” and the air pump is powered by Chang’s rechargeable battery. Id. (citing Ex. 1007 ¶¶ 72, 80).” slip op. at 34

  Patent outcomesUS 11,413,380 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,413,380
• Tommy John, Inc. v. Pakage Apparel, Inc.All claims unpatentable
  PTAB · Feb 12, 2026 · IPR2024-01163 · APJ Robert J Silverman · IPR · Final written decision

  The Board held claims 1–13, 15, and 16 unpatentable as obvious under § 103 over the identified combinations of Kitsch, Brocks, and Carrillo.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Accordingly, for purposes of this Decision, we adopt Petitioner’s” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “21; 4:1:13–22. Accordingly, Kitsch and Brocks have similar goals, with respect to formation of a secure pouch for containing the genitals, for which each reference discloses a distinct technical solution. Thus, a POSITA would have regarded the application of Brocks’ familiar and effective gathering technique to Kitsch’s side panels as a viable approach for improving a supportive pouch, and would have expected such combination of teachings to achieve the structural benefit used in Brocks. See Pet. 25–27 (citing, inter alia, Ex. 1005 ¶¶ 68–72). In other words, a POSITA would have had a reasonable expectation that the combination of Kitsch and Brocks, as discussed above, would result in what is recited in limitation 1[g].” slip op. at 44

  Patent outcomesUS 10,834,974 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,834,974
• Revvo Technologies, Inc. v. Cerebrum Sensor Technologies, Inc.Other
  PTAB · Jan 14, 2026 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Remand

  On remand, the Board reinstituted review of all challenged claims on all grounds after finding Petitioner sufficiently explained its differing claim-construction positions.

  RulingsRemand decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Id. The Director neither addressed the merits of Petitioner’s challenges nor found that our prior consideration of those merits was faulty. Accordingly, we understand that we need not reconsider our conclusion that Petitioner had demonstrated a reasonable likelihood of proving that claims 1, 2, 7–9, 11, 12, and 20–24 were unpatentable or that the merits of patentability set forth in the Petition warranted institution of inter partes review.” slip op. at 5

  • BurdenDecided for petitioner

    “The question before us, therefore, is whether the Petitioner’s proffered explanation that it has proposed a different claim interpretation before the Board because the District Court may decline to adopt the narrower claim interpretations it advocates there is sufficient. We find that Petitioner’s explanation is sufficient because it follows the Director’s exemplary logic. Whether a district court has already or might in the future decline to adopt constructions that a petitioner proposes in related district court litigation merely reflects the timing of when a dispute over claim interpretation will be resolved. The Director and Patent Owner both recognize that, to resolve the dispute over claim interpretation that exists here, a decision-maker must determine “a single claim construction that best captures the true meaning of the patent claim.” Remand 4; PO Remand Br. 3. Based on the record presented by the parties to date in this proceeding, no dispute exists that the disputed claim terms mean what Patent Owner says they mean in the Litigation. Accordingly, we find that, at this stage of the proceeding, it is undisputed that Patent Owner’s interpretations of the claim terms represent the “single claim construction that best captures the true meaning of the patent claim.”8 Under that claim interpretation, we” slip op. at 8

  None
  Patents in suitUS 11,835,421
• Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentable
  PTAB · Jan 7, 2026 · PGR2024-00043 · APJ Ryan H Flax · PGR · Final written decision

  Claims 1–39 are unpatentable under Grounds 1–10; Petitioner did not prove lack of enablement under Ground 11, and Patent Owner’s motion to exclude was denied.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “REAL PARTIES-IN-INTEREST Petitioner identifies Avation Medical, Inc. as the real party-in-interest. Pet. x. Patent Owner identifies EMKinetics, Inc. as the real party-in-interest. Paper 5, 1; Paper 6, 1. Neither party contests the other’s assertions on this. C.” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A POSA at the time of the claimed invention would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices. Additional work experience could substitute for a formal degree and vice versa. Ex.1003, ¶21. Pet. 20 (citing Ex. 1003). Patent Owner does not contest this proposed definition or offer an alternative. See generally Resp. We accept and use Petitioner’s uncontested definition of the ordinarily skilled artisan, which appears to comport with the level of skill in the art reflected in the prior art of record and the ’943 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may]” slip op. at 19

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.200(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner states that, “no terms require construction for purposes of this Petition.” Pet. 21. Patent Owner presents no express position on claim construction. See generally Resp. We do not expressly construe any claim terms. E.” slip op. at 20

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner

    “question, based on factual findings. VidStream, 981 F.3d at 1063–64. Moreover, public accessibility is the touchstone in determining whether a reference is a printed publication and such depends on whether the reference was available to interested, ordinarily skilled persons exercising reasonable diligence, which is determined on a case-by-case basis. Id. at 1065. Particularly pertinent here is that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” Id. Hulu (which cites VidStream on this issue) concerned, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. Hulu, 2021 WL 487622. Hulu holds that, although testimonial evidence is one way to prove public accessibility, there are also a variety of hallmarks of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at *10–13, 21. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established, and whether the reference’s “purpose of publishing . . . was ‘dialogue with an intended audience.’” Id. at *10–21 (citing Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)).” slip op. at 30

  Patent outcomesUS 11,844,943 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 11,844,943
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.