- Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentablePTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11
- Strike new argumentNew argument disregardedDecided for patent owner
“Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19
Patent outcomesUS 8,264,003 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,264,003 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26
Patent outcomesUS 8,562,324 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,562,324 - Dr. Falk Pharma GmbH v. Ellodi Pharmaceuticals, L.P.Adverse judgmentPTAB · Jun 3, 2026 · PGR2025-00086 · APJ Tawen Chang · PGR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment and terminated the PGR as to claims 1–34 after Patent Owner disclaimed all challenged claims.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request judgment against itself at any time during a proceeding,” including by “[d]isclaimer of the involved application or patent” or “[c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. §§ 42.73(b)(1)–(b)(2). Accordingly, we grant Patent Owner’s Request for Adverse Judgment and terminate the proceeding. slip op. at 2
NonePatents in suitUS 12,290,598 - Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Jun 3, 2026 · IPR2025-00257 · APJ Lilan Ren · IPR · Final written decision
Claims 1–15 are unpatentable because Petitioner proved by a preponderance of the evidence that the asserted § 103 grounds render them unpatentable.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“proceeding, we determine Petitioner has proven by a preponderance of the evidence that each of claims 1–15 of the ’660 patent is unpatentable.” slip op. at 85
Patent outcomesUS 9,592,660 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,592,660 - Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution deniedPTAB · May 18, 2026 · IPR2025-00278 · APJ David Cotta · IPR · Institution
The Board denied institution of Berkshire Hathaway Energy Company and PacifiCorp’s petition because it had instituted the earlier-filed IPR2025-00274 challenging the same patent.
RulingsInstitution decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“request from Patent Owner for Director Review, finding that Patent Owner introduced “evidence sufficient to put RPI and privity at issue” and remanding with instructions to “allow discovery, narrowly tailored to resolve the RPI and privity issues” including “at least materials sufficient to clarify the evidence the Board found to be ‘ambiguous’ and to avoid the need for the Board to ‘speculate as to the nature of the redacted material.’” Paper 57 (Decision on Request for Director Review). The Director instructed that after allowing such discovery, we “should then determine on the full record whether Petitioners have met their burden of demonstrating that the Petitions are not time-barred under § 315(b), applying the framework set forth in Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242–44 (Fed. Cir. 2018). Concurrently herewith, we issue a decision in IPR2025- 00278 finding that Petitioner has met its burden of demonstrating that its Petition is not time-barred under 35 U.S.C. § 315(b).” slip op. at 2
- Other 314aInstitution denied discretionary otherInstitution denied
“Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00274, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00274, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00274 . . . before IPR2025-00278.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00274. For the reasons discussed in our concurrently issued decision in IPR2025-00274, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00274. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’114 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00274 before IPR2025-00278, we deny institution of the Petition in this proceeding.” slip op. at 3
Discretionary denialPatents in suitUS 10,343,114 - Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution deniedPTAB · May 18, 2026 · IPR2025-00281 · APJ David Cotta · IPR · Institution
The Board denied institution because it had instituted IPR2025-00280 challenging the same patent, consistent with the Director’s instruction to maintain at most one IPR.
RulingsInstitution decision- Other 314aInstitution denied discretionary otherInstitution denied
“Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00280, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00281, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00280 . . . before IPR2025-00281.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00280. For the reasons discussed in our concurrently issued decision in IPR2025-00280, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00280. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’517 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00280 before IPR2025-00281, we deny institution of the Petition in this proceeding.” slip op. at 3
Discretionary denialPatents in suitUS 10,596,517 - Therabody, Inc. v. Hyperice IP Subco, LLCNo claims unpatentablePTAB · May 11, 2026 · PGR2025-00013 · APJ Alyssa A Finamore · PGR · Final written decision
Claims 1–16 and 18 were not shown unpatentable because the asserted prior art did not establish the claimed quick-connect system during reciprocation, and Clark was not analogous art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill in the Art The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The prior art may reflect the level of ordinary skill in the art. Id.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“During oral argument, Petitioner confirmed it would not object to the Board adopting the construction that Petitioner proposes in the district court litigation. JUDGE MARSCHALL: I think the Petitioner wouldn’t object if we adopted the construction that Petitioner proposed in the district court, especially the “designed to” construction, correct? MR. BERG: No. We wouldn’t object to that. And we think that our Petition is on all fours with that construction. Tr. 81:12–16. As Petitioner does not object to adopting its construction from the district court litigation, we construe claim element 1[e] in accordance with Petitioner’s construction from the district court litigation.” slip op. at 11
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable
“The invention, a reciprocating massage device, is in a predictable field, namely the electro-mechanical arts. Also, there is no evidence that the recited quick-connect system is complex, even considering Patent Owner’s alleged understanding of it. Rather, Dr. Pratt testifies that many different types of connectors, whether they require alignment or not, were known. Ex. 1002 ¶¶ 54–58. Given the predictability of the electro-mechanical arts and lack of complexity of the recited quick-connect system, a low level of detail is required to satisfy the written description requirement. See RAI Strategic Holdings, Inc. v. Philip Morris Prods. S.A., 92 F.4th 1085, 1090 (Fed. Cir. 2024) (“Given the predictability of electro-mechanical inventions such as the one at issue here, and the lack of complexity of the particular claim limitation at issue—i.e., reciting the length of a heating member—‘a lower level of detail is required to satisfy the written description requirement than for unpredictable arts.’” (quoting Hologic, Inc. v. Smith & Nephew, Inc., 884 F.3d 1357, 1361 (Fed. Cir. 2018)). In view of the low level of detail required to satisfy the written description requirement, Petitioner has not persuaded us that the Specification’s example of a quick-connect system configured to secure the massaging head as the piston reciprocates fails to provide sufficient written description support for the “quick-connect system” recited in independent claims 1 and 18.” slip op. at 14
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteNot shown unpatentable
“Contrary to Petitioner’s assertion, the Specification provides guidance as to what amount of deviation from a perfect cylinder is still “substantially cylindrical.” The Specification describes: Quick-connect system 600 includes a piston 602 that has a hollow-end bore 608 for receiving the shaft 621 of a massaging head 620. Located within the bore 608 of piston 602 is a cylindrical seat 604. Cylindrical seat 604 retains a magnet 606. Magnet 606 is illustrated with its north pole located flush with the seat and facing toward the opening in bore 608. Massaging head 620 includes a shaft 621 having a cylindrical pocket 622 at the distal end. Located within the cylindrical pocket 622 is a magnet 624. Magnet 624 is positioned so that its south pole is located at the distal end of shaft 621. Accordingly, when the shaft 621 of massaging head 620 is slid into opening in bore 608, the magnets 606 and 624 are attracted to one another and magnetically hold massaging head 620 firmly in place. Ex. 1001, 6:57–7:3. In view of the description of quick-connect system 600, the Specification sets forth a standard for ascertaining whether the bore and the seat located within the bore are “substantially cylindrical.” To wit, the bore and the seat within the bore are “substantially cylindrical” when the massaging head and magnet are respectively received therein so that the magnet in the seat and the magnet in the pocket of the massaging head can magnetically hold the massaging head firmly in place. Furthermore, Dr. Pratt testifies that “[m]agnetic connectors comprise a magnet on at least one of the two objects to be joined. These types of connectors are ubiquitous even today for driving threaded fasteners.” Ex. 1002 ¶ 56. Dr. Pratt also testifies that a POSITA would understand how to take into account certain variances, like runout. Ex. 2033, 25:3–17. Dr. Pratt’s testimony shows that magnetic connectors are well known and that a POSITA would be able to determine whether the bore and the seat within the bore were “substantially cylindrical” for a secure connection of the massaging head. In view of the foregoing, Petitioner has not persuaded us that the claim term “substantially cylindrical” recited in claims 13–16 fails to inform, with reasonable certainty, the shapes of the bore and the structure within the bore. Petitioner has not proven, by a preponderance of the evidence, that any of claims 13–16 are unpatentable under 35 U.S.C. § 112(b) as indefinite.” slip op. at 19
Patent outcomesUS 11,938,082 not shown unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 11,938,082 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCAll claims unpatentablePTAB · May 4, 2026 · IPR2022-00189 · APJ Sheridan K Snedden · IPR · Remand
Claim 16 is unpatentable because Slater anticipates it.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“undisputed limitations of claim 16 and find that Petitioner establishes that Slater discloses each limitation of claim 16 for the reasons provided by Petitioner. Specifically, Petitioner shows, and Patent Owner does not dispute, that Slater describes a plate with “flared hips” comprising opposing “generally parabolic wings” as recited in dependent claim 16. Pet. 28–30; Ex. 1005, Fig. 2; Ex. 1002 ¶ 106. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 28–30. Based on the foregoing, Petitioner proves by a preponderance of the evidence that Slater anticipates claim 16.” slip op. at 12
Patent outcomesUS 8,529,608 unpatentable§ 102 anticipationPatents in suitUS 8,529,608 - Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01452 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8, 9, 13, and 19 are unpatentable; claims 2–5, 11, 12, 17, and 18 were not shown unpatentable over Slater or Slater and Weaver.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, 12, 17, and 18 of the ’716 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 188–196. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 191– 196. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 18
Patent outcomesUS 9,763,716 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,763,716
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.