• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jul 20, 2026 · IPR2025-00228 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1, 2, 4, 5, and 9–18 as obvious over Kim; claims 1–18 over Kim and Fang; claims 1–15 over Han and Fang; and claims 17–18 over Han, Fang, and Chen.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 26 (citing Ex. 1003 ¶42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does not dispute this assessment. PO Resp. 7–8. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’276 patent and the prior art of record.” slip op. at 6

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Dr. Campbell has a Ph.D. in physics, supplying the advanced degree that Petitioner’s definition of a person having ordinary skill in the art accepts as a replacement for some experience. Ex. 2006 ¶ 2. Dr. Campbell has significant experience in semiconductor technology, including in process technologies for submicron CMOS, years of research in semiconductor processing, materials, and device structures, and authored “[t]he leading textbook on semiconductor technology.” Id. ¶¶ 2–4. Dr. Campbell qualifies as a person of ordinary skill in the art under the parties’ agreed definition.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner proposed that the terms “exposing portions” and “etching the exposed portions” require two different steps performed in that order. PO Resp. 7–10. Petitioner does not contest this characterization. Pet. Reply 1– 2. Patent Owner also proposes that this requires the exposure step not to perform any etching of the newly exposed layer. PO Resp. 10–12 (citing Ex. 1001, 10:2–5, 10:15–17 (stating that the etch-stop layer “protects the underlying structure until all the VIA openings 640 are formed” and that it “[t]he essence of an etch-stop layer dictates that contact-hole etching stops or slows down upon contact, i.e., exposing without penetrating it.” Pet. Reply 11. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “described in earlier embodiments would not be consistent with Kim’s statement that previously described elements are “omitted” in the Figures 17A to 22B section “for concise description.” As admitted by Patent Owner, it would be a “reasonable inference” that materials described in a first embodiment for a particular hypothetical layer L would also be used for that layer L in later embodiments absent an express statement to the contrary “because you have just omitted that sort of duplicative description.” Tr. 37:9–38:12. Kim’s Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4–15 embodiments. Thus, it would similarly be a “reasonable inference” that aspects of the stack structure would be understood to apply to the same stack in the embodiments of Figures 17A–22B, which rely upon, in unaltered form, the earlier-described elements of the stack. stack on bottom, they “replace” and “exclude” any prior description of a gate-stack-on-top. PO Resp. 18–19 (citing Ex. 2019 ¶¶ 40–41; Ex. 1005 ¶¶ 185–187 (describing the etch-stop layer as covering the sacrificial layers only at their end portions)). However, as admitted by Patent Owner, all of Kim’s Figures show only a gate-stack-on-bottom structure. Tr. 41:6–7 (“For the first embodiment, it is true that figures show the gate stack on bottom.”). The fact that Kim’s Figures 17A–22B, which add etch-stop and barrier layers to the gate stack, are shown only as gate stack on bottom is merely consistent with the uniform use of gate-stack-on-bottom in Kim’s Figures, which show the layer-by-layer construction of its device. Like Figures 4–15, Figures 17A–22B exemplify rather than limit the description of the previously described memory stack, and do not exclude the gate-stack-onbottom description of the memory stack. Kim can be used for all it realistically teaches, including descriptions in its disclosure that are not represented by specific Figures. See In re Chapman, 357 F.2d 418, 424 (C.C.P.A. 1966) (stating that a reference “is not limited to the disclosures in its specific illustrative examples.”). Accordingly, the record supports Petitioner’s assertion that Kim’s teaching of a gate-stack-on-top alternative for the memory stack would be understood by a POSITA as a memory stack option applicable to its other embodiments having that same memory stack.” slip op. at 11

  Patent outcomesUS 11,101,276 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,101,276
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Tesla, Inc. v. Intellectual Ventures II LLCAll claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00221 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1–8 are unpatentable as obvious: claims 1, 2, 5, and 6 over Dateki; claims 3 and 7 over Dateki and Mate; and claims 4 and 8 over Dateki and Chitrapu.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “[w]ould have been someone knowledgeable and familiar with the wireless communications systems that are pertinent to the ’889 patent. That person would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems. Pet. 18–19 (citing Ex. 1003 ¶ 25). Patent Owner does not dispute Petitioner’s contention as to the level of ordinary skill in the art. See generally, PO Resp. Based on this record, and because there is no dispute, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’889 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “do not recite, as Patent Owner interprets it, that the extracted power control information upon which the UE bases its transmission of a signal be “the same” power control information extracted from the control message. PO Resp. 25. Where the claim is clear on its face, we decline to inject “the same” into the construction, that is, words that are not actually in the claim. Yet considering the plain language of claim 1, we mostly agree with Patent Owner’s interpretation, namely that “a transmission power level based on the extracted power control information,” as required in limitation [1.6] includes power control information extracted from “the control message,” in limitation [1.5] having “power control bits for a plurality of UEs” as recited in limitation [1.4]. Ex. 1001, 10:2–19. We understand and interpret the concluding limitation in method-type claim 5 in the same manner as limitation [1.6].” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “do not recite, as Patent Owner interprets it, that the extracted power control information upon which the UE bases its transmission of a signal be “the same” power control information extracted from the control message. PO Resp. 25. Where the claim is clear on its face, we decline to inject “the same” into the construction, that is, words that are not actually in the claim. Yet considering the plain language of claim 1, we mostly agree with Patent Owner’s interpretation, namely that “a transmission power level based on the extracted power control information,” as required in limitation [1.6] includes power control information extracted from “the control message,” in limitation [1.5] having “power control bits for a plurality of UEs” as recited in limitation [1.4]. Ex. 1001, 10:2–19. We understand and interpret the concluding limitation in method-type claim 5 in the same manner as limitation [1.6].” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “where packet transmission is conducted, “the transmission power control information is transmitted via the HS-SCCH as second transmission power control information TPCC at a shorter periodic cycle.” PO Resp. 11 (quoting Ex. 1005, 13:11–13). But in context, after describing transmission of TPCC 1 on F-DPCH, Dateki says “[a]lso, in a case where packet transmission is conducted, the transmission power control information is transmitted via the HS-SCCH as second transmission power control information TPCC at a shorter periodic cycle.” Ex. 1005, 13:8–13 (emphasis added). We find it significant that the word “also” is used by Dateki, here, to describe the relationship of TPCC 1 and TPCC 2 as used together. If the intent was to transmit and use only TPCC 2 on HS-SCCH when data packets are transmitted on HS-PDCH, it would have made more sense to say “alternatively,” and otherwise make clear that only TPCC 2 is transmitted. But they did not. On the other hand, the inventors certainly understood how to explain when TPCC 2 is not transmitted. For example, Dateki makes clear that in certain embodiments TPCC 2 is unnecessary and “transmission power control may be effectively realized without including transmission power control information in the HS-SCCH.” Id. at 14:33–35. The same cannot be said for TPCC 1.” slip op. at 30

  Patent outcomesUS 11,664,889 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,664,889
• Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentable
  PTAB · Jul 1, 2026 · IPR2025-00222 · APJ Frederick C Laney · IPR · Final written decision

  Claims 1, 2, 4, 5, 8–11, 13, and 14 are unpatentable over Yu and Miyazaki; claims 15, 16, and 19 were not shown unpatentable over Matsushima.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “at, and before, the earliest claimed priority date of the ’158 patent . . . would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2–3 years of experience in digital imaging systems,” adding that “[l]ess experience may be sufficient with additional education, and likewise, less education may be sufficient with additional work experience.” Pet. 6–7 (citing Ex. 1003 ¶¶ 16–18). Patent Owner does not offer a competing definition or dispute Petitioner's articulation. Based on the entire record, we adopt Petitioner’s characterization of the level of skill for one of ordinary skill in the art because that characterization, we find, is consistent with the ’158 patent and the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “We determine that the claims require a per-channel determination of integration time—that is, an integration time arrived at for each sensor or channel individually—and cannot be satisfied by a single global value merely applied uniformly across the sensors. We do not, however, read the independent claims to require that the per-channel integration times differ from one another.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “We adopt the definition clearly and unambiguously set forth in the specification, which was likewise adopted by the Court in the related litigation. See Pet. 7–8, 55; Pet. Reply 1–2 (district court construing the term to mean “the time the image sensor collects and integrates signal from the scene”). The specification states that the integrated photo-charge “is directly related to the time the image sensor collects and integrates signal from the scene,” and that “[t]his is known as integration time.” Ex. 1001, 4:4–7. Accordingly, the ’158 patent demonstrates that the inventors indisputably acted as a lexicographer for the term “integration time.”” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “We construe “during a frame” to mean the period during which data for a single frame of an image is captured. The limitation is satisfied where the per-channel integration time is effectuated during the frame; it does not require that the integration time be re-determined mid-frame, nor does it require actuation of a “charge integration switch.” The specification’s only use of the phrase confirms this reading: “each camera channel is controlled during a frame under an independent integration time.” Ex. 1001, 3:45–50. Consistent with that usage, the specification describes selecting an integration time for each channel and then integrating the photo-signal “within a single frame of data,” and describes placing the charge-integration switch in a state to allow charge to accumulate for the selected period and then transferring the accumulated charge upon completion of the integration period. Id. at 4:51–54, 11:3–18. We decline Patent Owner’s proposal to require in-frame actuation of a charge-integration switch, for the same reason we decline to import that structure into “integration time.” We also decline to read the phrase to require mid-frame re-determination of the integration time, because the patent’s own embodiment selects an integration time and then integrates charge during the frame under that selected time. Ex. 1001, 4:51–54, 11:3– 18. So construed, “during a frame” is not redundant of the independentclaim limitation: it adds that the per-channel control occurs within a single frame (intrascene), as distinct from adjustment from one frame to the next (interscene).” slip op. at 15

  Patent outcomesUS 9,232,158 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,232,158
• Tesla, Inc. v. Intellectual Ventures II LLCAll claims unpatentable
  PTAB · Jun 26, 2026 · IPR2025-00220 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 1–18 are unpatentable under § 103 over Wallen and Berggren because the combined teachings render the claimed subject matter obvious.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “We agree that Patent Owner’s proposed claim construction is wholly unsupported by, and inconsistent with, the language of independent claims 1, 7, and 13, and the aims of the ’670 Patent Specification. See Ex. 1001, 2:3– 25, 9:32–10:5, 12:51–67, 18:54–19:6, 19:26–42, 20:12–26. Moreover, the cited extrinsic evidence––testimony by Patent Owner’s expert Dr. Lomp–– does not support Patent Owner’s proposed construction because it is internally inconsistent and also undermined by Dr. Lomp’s inconsistent deposition testimony. See Ex. 1036, 11:6–17, 12:9–12; Ex. 2010 ¶¶ 40, 48. Similarly, the extrinsic evidence cited by Petitioner (e.g., Exs. 1037, 1038, 2009) undermines Patent Owner’s position emphasizing the intended recipient devices of SIB1. In summary, we decline to adopt Patent Owner’s proposed claim construction because it is unsupported by the claim language, the ’670 Patent Specification, and the cited extrinsic evidence. with the ordinary and customary meaning which does not include limiting SIB1 to an ordinary legacy SIB and excluding MTC specific SIBs or SIBs intended for MTC devices. In addition, we need not construe explicitly any other claim term or phrase. See, e.g., Nidec Motor Corp. 868 F.3d at 1017 (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 13

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a bachelor’s degree from an accredited program in electrical engineering, computer engineering, computer science, or equivalent training, and at least two years of professional experience relating to wireless communication technology” and “[l]ack of professional experience can be remedied by additional education, and vice versa.” Pet. 15–16 (citing Ex. 1003 ¶¶ 19–21). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We find that “at least” in Petitioner’s formulation of the level of skill in the art is vague and open-ended. Otherwise, we adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’670 Patent Specification and the prior art of record. slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “filing date. As explained above, the burden of production shifted to Patent Owner to show that Wallen is not prior art because the ’670 Patent is entitled to the earlier January 20, 2012, filing date of foreign priority application GB1201000. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). Patent Owner’s arguments fail to meet this burden of production because, aside from addressing a system information block 1, Patent Owner’s arguments do not substantively address how GB1201000 provides written description support for any other limitations of the claimed invention. See PO Resp. 43, 57. Accordingly, Patent Owner has not met its burden of production in coming forward with evidence or argument to show possession of the claimed invention in foreign priority application GB1201000, the burden of production did not shift back to Petitioner, and,” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “primary synchronization signal (PSS), a secondary synchronization signal (SSS), and a physical broadcast channel (PBCH) including a master information block (MIB).” See Pet. 41–42 (citing Ex. 1003 ¶¶ 70–75; Ex. 1005 ¶¶ 76, 77, 83–84). Petitioner implicitly acknowledges that Wallen does not expressly disclose a physical broadcast channel (PBCH), but relies on Berggren for confirming that the LTE standard specifies that a PBCH carries the MIB. See Pet. 42–43 (citing Ex. 1003 ¶ 74; Ex. 1007 ¶¶ 73–75). According to Petitioner, “a person of ordinary skill in the art would have been motivated to transmit Wallen’s MIB using a PBCH as taught by Berggren.” Pet. 43 (citing Pet. 33–38). In particular, Petitioner asserts that a person of ordinary skill in the art “would have been motivated for Wallen’s LTE system to utilize the LTE standard implementation details taught by Berggren,” and “it would have been predictable and beneficial for Wallen’s user equipment to receive the MIB in the [PBCH], as was standard in LTE.” Pet. 34 (citing Ex. 1003 ¶ 58), 37 (citing Ex. 1003 ¶ 63). According to Petitioner, “the combination is nothing more than ‘the predictable use of prior art elements according to their established functions.’” Pet. 38 (citing KSR, 550 U.S. at 417). Based on the entire record developed during trial, we are persuaded by a preponderance of the evidence that Petitioner provides sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to modify Wallen’s broadcast MIB with Berggren’s teachings of using a PBCH for transmitting broadcast MIBs. See Pet. 33–38; KSR, 550 U.S. at 418.” slip op. at 24

  Patent outcomesUS 11,206,670 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 11,206,670
• Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentable
  PTAB · Jun 23, 2026 · IPR2025-00219 · APJ Frederick C Laney · IPR · Final written decision

  Claims 11–22 were not shown unpatentable under any § 103 ground because the prior art did not teach or suggest receiving the claimed resource allocation and multi-level TPC command on one physical channel.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). Moreover, a petitioner should 1 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112-29, 125 Stat. 284 (2011), amended 35 U.S.C. § 103, effective March 16, 2013. Because the application from which the ’153 patent issued claims priority to an application filed before this date, the pre-AIA version of § 103 applies. not “place the burden on [the Board] to sift through information presented by the Petitioners, determine where each element [of the challenged claims] is found in [the cited references], and identify any differences between the claimed subject matter and the teachings of [the cited references.]” Google Inc. v. EveryMD.com LLC, IPR2014-00347, Paper 9 at 25 (PTAB May 22, 2014).” slip op. at 5

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “The second and third asserted benefits—reduced complexity and reduced latency—rest on the declaration of Dr. Kotzin (Ex. 1003 ¶ 64) rather than on any disclosure of Andersson or Khan. We accord that testimony little weight on this point because it asserts the benefits in conclusory terms without explaining why they would result from inserting a scheduling grant into Andersson’s undefined “other bits,” as distinct from Khan’s separate-slot design.” slip op. at 20

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art Petitioner asserts that ordinarily skilled artisans “would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems.” Pet. 14. Petitioner’s proposed definition, which Patent Owner does not dispute, appears reasonable and consistent with the asserted prior art and the ’500 Patent. Therefore, we adopt it as the ordinary level of skill of an artisan in the field of the patented technology for our analysis below.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner offers a proposed construction for the recited “single physical channel” found in limitation 11.2 and “an accumulation of TPC commands” found in independent claims 12 and 18. PO Resp. 9–17. Petitioner likewise addresses the scope of an accumulation of TPC commands, but Petitioner does not contest directly Patent Owner’s proposed construction for “single physical channel.” Pet. Reply 2–7. We determine, however, that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  Patent outcomesUS 9,706,500 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,706,500
• Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentable
  PTAB · Jun 22, 2026 · IPR2025-00217 · APJ Frederick C Laney · IPR · Final written decision

  The Board held claims 1–5, 10–15, and 20 not unpatentable under four §103 grounds because the petitioner did not establish the claimed enabled-accumulation indication or single-channel combination.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “onset to show with particularity why the patent it challenges is 1 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112-29, 125 Stat. 284 (2011), amended 35 U.S.C. § 103, effective March 16, 2013. Because the application from which the ’153 patent issued claims priority to an application filed before this date, the pre-AIA version of § 103 applies. 2 US 6,334,047 B1, iss. Dec. 25, 2001 (Ex. 1009). 3 US 2001/0036238 A1, pub. Nov. 1, 2001 (Ex. 1010) 4 US 2004/0190485 A1, pub. Sept. 30, 2004 (Ex. 1005). 5 US 2004/0077370 A1, pub. Apr. 22, 2004 (Ex. 1008). 6 US 6,600,772 B1, iss. July 29, 2003 (Ex. 1004). 7 US 6,529,741 B1, iss. Mar. 4, 2003 (Ex. 1007). unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). Moreover, a petitioner should not “place the burden on [the Board] to sift through information presented by the Petitioners, determine where each element [of the challenged claims] is found in [the cited references], and identify any differences between the claimed subject matter and the teachings of [the cited references].” Google Inc. v. EveryMD.com LLC, IPR2014-00347, Paper 9 at 25 (PTAB May 22, 2014).” slip op. at 5

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art Petitioner asserts that ordinarily skilled artisans “would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems.” Pet. 15. Petitioner’s proposed definition, which Patent Owner does not dispute, appears reasonable and consistent with the asserted prior art and the ’153 patent. Therefore, we adopt it as the ordinary level of skill of an artisan in the field of the patented technology for our analysis below.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “apparent agreement between the parties: “TPC command accumulation” refers to a process that collects and uses TPC commands from a network device to cumulatively affect transmission power. And having studied the intrinsic record of the ’153 patent, we are in accord. But, we decline to further limit the construction of “TPC command accumulation” in the manner proposed by either party––i.e., (1) each TPC command adjustment must be summed to cumulatively affect transmission power (as proposed by Petitioner) or (2) a TPC command value must be added to an integrator. Although both parties are able to point to disclosures in the ’153 Patent where the TPC command accumulation of an exemplary embodiment is described as using an integrator and/or summing each TPC command adjustment to cumulatively affect a UE’s transmission power (PO Resp. 16 (citing Ex. 1001, 3:39–43, 7:15–29, 9:27–42; Ex. 2016 ¶¶ 35–42); Pet. Reply 4–5 (citing Ex. 1001, 3:39–43, 7:2–6, 7:8–22, 9:28–40)), neither party has demonstrated persuasively that the intrinsic record of the ’153 Patent demonstrates a clear intent to limit “TPC command accumulation” to those particular embodiments.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “A rationale supports obviousness only where the proffered benefit would flow from the specific modification proposed; a benefit that the prior art realizes in a different structural context does not, without more, establish that the same benefit would result from inserting one reference’s element into the other. On this record, the nexus between Khan’s benefits and Petitioner’s “other bits” modification is missing.” slip op. at 40

  Patent outcomesUS 10,952,153 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,952,153
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00189 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claim 19 is unpatentable as obvious over Kim and over Nam; the challenge based on Lee and Park fails for lack of a reasonable expectation of success.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “B. Patent Owner’s Disclaimer of Claims 17 and 20 As indicated above, Patent Owner filed a statutory disclaimer of claims 17 and 20 of the ’666 patent. See Ex. 2005. In view of Patent Owner’s statutory disclaimer, we treat claims 17 and 20 as having never been part of the ’666 patent. See Vectra Fitness, Inc. v. TNWK Corp., ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, we do not consider claims 17 and 20 to be within the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claim 19, the challenged claim that has not been disclaimed.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) 3D memory devices, or an equivalent level of skill, knowledge and experience (e.g., an advanced degree may substitute for professional experience).” Pet. 24–25 (citing Ex. 1003 ¶¶ 34–37). Petitioner further contends that the “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. at 25 (citing Ex. 1003 ¶¶ 34–37).” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “evidence from the complete record now before us, we determine that the claim term “curved side surface” encompasses any outer surface of the structure with curvature. See Hamilton Beach Brands, Inc. v. F’real Foods, LLC, 908 F.3d 1328, 1338–1339 (Fed. Cir. 2018) (finding that it is acceptable for the Board to adopt its own claim construction where the parties “had notice of the contested claim construction and an opportunity to be heard”). We do not adopt Patent Owner’s position that “curved side surface” requires the side surface to be curved along a direction perpendicular to the top surface of the structure (e.g., the z-axis).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “curved side surface” are premised on its proposed claim construction which, as set forth above, we decline to adopt. Instead, we determined that “curved side surface” as used in the challenged claim encompasses any outer surface of the structure with curvature, which does not need to be curved in any specific direction. See § II.B.1, supra. Kim states: Embodiments of the inventive concepts in which the protrusion pad PAD_P has a rectangular parallel[] shape is illustrated, but the protrusion pad PAD_P is not limited thereto and, in some embodiments, may have a shape including a curved surface based on a virtual rectangular parallel[] shape, a cylindrical shape, or any shape. Ex. 1005, 8:29–34 (emphases added). Dr. Lee testifies that “[a] POSITA would have recognized that this includes configurations where the sides of the protrusion pads are curved, particularly to optimize electrical connectivity and mitigate stress at material interfaces.” Ex. 1003 ¶ 201. Dr. Lee further testifies that a POSITA would have understood Kim’s disclosure “teaches a variety of different protrusion pad PAD_P shapes” including “pads with curved sides when viewed in cross-section or pads with curved sides when viewed from above.” Id. ¶ 202. Accordingly, we determine that Kim discloses a cylindrically-shaped PAD_P that has a “curved side surface” as required by the challenged claim. slip op. at 24

  Patent outcomesUS 11,145,666 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,145,666
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00118 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–14 were not shown unpatentable because the Petition did not establish the claimed adjacent pad groups, common ESD bus, or pad-to-pad bonding wires.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “would have had a bachelor of science degree in electrical engineering or similar discipline, and 2–3 years of professional experience working with (e.g., researching, analyzing, designing, or teaching) ICs, or equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience and vice versa). This POSITA would have been aware of and generally knowledgeable about IC design, layout, manufacturing, packaging, and ESD protection. Pet. 18 (citing Ex. 1003 ¶¶ 29–33). Patent Owner states that it “does not dispute Petitioner’s proposed level of a” POSITA “for purposes of this IPR.” PO Resp. 10. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’164 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record and the arguments raised by the parties, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 7

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “includes segmented ground rails 350, 355. . . . The package substrate 310 includes a package common ground rail 360, and the segmented SoC ground rails 350, 355 are independently connected to the package common ground rail 360 via separate connections 370, 375 respectively.”). As set forth above, Dr. Foty describes the three ground lines in Saint Figure 7-7 as “segmented rails” when discussing the combination of Saint and Haralabidis, thus equating the three ground lines in Saint Figure 7-7 with Haralabidis’ segmented ground rail. Ex. 1003 ¶ 368. Neither Petitioner nor Dr. Foty, however, adequately addresses how or why a POSITA would have understood that the three separate grounds lines in Saint Figure 7-7 were “segmented rails” like the segments of the single ground line described in Haralabidis. In contrast, Dr. Khatri credibly testifies: Haralabidis teaches the use of a “common ground rail” to connect “segmented ground rails.” Haralabidis, 3:9–22, 3:34– 40, 3:65–4:12. A POSITA would understand “segmented ground rails” to refer to a single ground signal that has been “segmented.” That is fundamentally different from the design of Saint’s Figure 7-7 that Dr. Foty relies on, which uses three different ground signals, GND1, GND2, and GND3—not a single ground signal that has been “segmented.” Because of that, a POSITA would not have been motivated to change the Figure 7-7 design completely to connect three separate signals (GND1, GND2, and GND3) together as Dr. Foty proposes. Ex. 1003 ¶ 368. Indeed, for these reasons, a POSITA would have understood Haralabidis’ teachings of a “common ground rail” are inapplicable to Saint’s Figure 7-7. Ex. 2010 ¶ 129. Petitioner’s arguments and Dr. Foty’s testimony with respect to the modification of Saint Figure 7-7 leave an analytical gap that does not apprise us of why a POSITA would have modified Saint Figure 7-7 to include a common ESD bus as described in Haralabidis.” slip op. at 37

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “For these reasons, we find that Yoshinaga’s statement that “[r]eference potential pads are not shown to simplify the drawing” indicates that reference potential pads are not depicted in Yoshinaga Figure 6, and determine that Yoshinaga Figure 6 does not disclose “a plurality of pad groups, adjacent and connected to the plurality of ESD buses” as recited in claim 6. Petitioner also argues that a POSITA would have understood that power supply pads 3, 4, and 58 in Yoshinaga “could just as readily be used as reference pads” and it would have been obvious “to use the pads immediately next to the saved areas as reference pads (e.g., pads 5 and 6) as pad assignments were left to the designer’s discretion.” Pet. 31 (citing Ex. 1003 ¶¶ 137–139). Petitioner asserts that “selecting which pads to use for ground, power signals, etc. is a design choice that depends on factors like chip size, the number of I/O signals, and the number of pads available.” Pet. 31 (citing Ex. 1003 ¶ 137–139). Petitioner states that such discretion would be to preserve Yoshinaga’s saved area for other circuitry as taught by Saint. Pet. 31–32 (citing Ex. 1003 ¶¶ 137–139; Pet. 19–23 (§ IX.A)). Neither Petitioner nor Dr. Foty adequately explain, however, why a POSITA would have made this specific design choice, namely, replacing power supply pads 3, 4, and 58 with reference pads. Pet. 31; Ex. 1003 ¶¶ 137–139; see also Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1069 n.4 (Fed. Cir. 2018) (“Merely stating that a particular placement of an element is a design choice does not make it obvious.” (quoting Cutsforth, Inc. v. MotivePower, Inc., 636 Fed. Appx. 575, 578 (Fed. Cir. 2016))). Petitioner offers the general proposition that pad assignments are left to the designer’s discretion, but this does not provide a reason why a POSITA would have been motivated to modify Yoshinaga Figure 6 as proposed. Pet. 31; Ex. 1003 ¶¶ 137–139. We have determined that Yoshinaga does not show (rather than does not label) reference pads. Because all of Yoshinaga’s illustrated pads are power supply pads, Petitioner’s proposed reassignment of pads would not be a simple matter of rearrangement of an existing mixture of power supply and reference pads, but require that reference pads be imported from elsewhere, and power supply pads be moved to some unspecified location. Petitioner’s arguments and Dr. Foty’s testimony with respect to the modification of Yoshinaga Figure 6 leave an analytical gap that does not apprise us of why a POSITA would have modified Yoshinaga Figure 6 to include reference pads in the place of power supply pads 3, 4, and 58. We agree with Patent Owner that none of Petitioner’s rationales” slip op. at 20

  Patent outcomesUS 10,879,164 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,879,164
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 1, 2026 · IPR2025-00117 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–19 are unpatentable: claims 1–9, 11–16, 18, and 19 as obvious over Kim; claims 10 and 17 as obvious over Kim and Fang, Park, and Park and Fang.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶ 42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not dispute Petitioner’s definition. PO Resp. 7. We adopt Petitioner’s proposed 4 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 103; PO Resp. the ’711 patent and the prior art of record.” slip op. at 5

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “Based on the record before us, we agree with Petitioner that “on a surface” should be interpreted in line with the definition of “on” set forth in the ’711 patent. Ex. 1001, 4:1–6. We particularly note that the ’711 patent states that “‘on’ . . . should be interpreted in the broadest manner” and that “on” is not limited to “directly on.” Id. Instead, the ’711 patent states that “‘on’ also includes the meaning of ‘on’ something with an intermediate feature or layer therebetween.” Id. Patent Owner agrees that this definition controls the “standalone ‘on’” term such that A may be on B even if there is an intervening layer between them. Tr. 55:8–11 (“The standalone ‘on,’ we agree in the context of the patent, you can have intervening layers. I think the patent is clear about that.”). Claim 14 recites that the etch-stop layer is “on” something; i.e., “on a side surface and a top surface of each step.” Ex. 1001, 16:20–22. Patent Owner agrees that a surface is a “something.” Tr. 56:5–8 (“surface obviously is a something”). Substituting the “a “‘on’ something with an intermediate feature or layer therebetween” results in claim 14 reading as, “on a surface with an intermediate feature or layer therebetween.” Unlike “directly on,” which specifies the relation between two things, “a surface” may merely indicate the thing that something is “on,” particularly when “on” is “interpreted in the broadest manner” as expressly required by the ’711 patent.” slip op. at 7

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “Although Dr. Campbell testified in his deposition in response to Petitioner’s counsel that “on the surface” requires direct contact with the surface, his interpretation was based on “embodiments of” the patent rather than a general understanding of a person skilled in the art confronted with that term. Ex. 1027, 122:6–25, 124:6–23 (“I’m not sure if there are other sources for that, but it was on the ’711, so I’ve taken it there.”). Dr. Campbell, upon questioning from Patent Owner’s counsel, later stated that “an expert in semiconductor fabrication” would understand “on the surface” to mean “contact between one layer and another . . . with nothing in between.” Id. at 146:25–147:6. However, Dr. Campbell did not explain why such an interpretation is particular to the semiconductor fabrication art, or provide other explanation or support for this statement, which is in tension with the definition of “on” in the ’711 patent. Accordingly, we significantly discount the weight accorded to that statement. Phillips, 415 F.3d at 1318 (stating, “conclusory, unsupported assertions by experts as to the definition of a claim term are not useful to a court. Similarly, a court should discount any expert testimony ‘that is clearly at odds with the claim construction mandated by the claims themselves, the written description, and patent.’”). On balance, Dr. Campbell’s testimony is best understood as a description of certain Figures of the ’711 patent rather than a representation of an ordinarily skilled person’s understanding of the term “on the surface.” See Ex. 2009 ¶ 47 (describing Figs. 1, 3, and 4 as depicting layers in contact with the underlying layer or substrate). For example, Dr. Campbell describes Figure 9A as having a barrier layer “on and directly contacting the top and side surfaces of each step.” Id. ¶ 28 (emphasis added) (citing inter alia Ex. 1001, 7:6–67). Dr. Campbell does not explain why, beyond the fact that many Figures show layers as adjacent and in contact, a person of ordinary skill in the relevant art would understand those Figures to limit the claim language rather than illustrating particular embodiments that fall within a broader scope of claims 14 and 15. See Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specifications into the claims.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We agree with Petitioner that Kim’s first and second section are described as compatible, not mutually exclusive, embodiments. Kim’s second section builds further layers upon the structure of its first section, and states: In these embodiments, the same elements as in the embodiments previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B will be denoted by the same reference numbers therein, and for concise description, overlapping description of elements previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B may be omitted. Ex. 1005 ¶ 184 (emphasis added). Patent Owner argues that only the embodiments in Figures 17A–22B describe an etch-stop layer and a barrier layer (as claimed), and that the language cited for a gate-stack-on-top configuration (e.g., Ex. 1005 ¶¶ 90, 91, and 240) is “conspicuously absent from the description of Figures 17A–22B.” PO Resp. 20 (citing Ex. 2009 ¶ 36). However, Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4 through 15 embodiments. While Figures 17A–22B show a gate-stack-on-bottom configuration, this merely continues the gate-stack-on-bottom illustrations that were used in all of the previous Figures, even for those in which it is undisputed that a gate-stack-on-top configuration is a described alternative. The Figures exemplify rather than limit the description of the gate-stack-on-bottom view in Figures 4–15 and do not exclude the gate-stack on bottom description of the embodiments exemplified by those figures.” slip op. at 17

  Patent outcomesUS 10,672,711 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,672,711

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.