- Penumbra, Inc. v. Rapidpulse, Inc.No claims unpatentablePTAB · Feb 17, 2026 · IPR2024-01261 · APJ Jamie T Wisz · IPR · Final written decision
Claims 1–20 were not shown unpatentable because the asserted combinations did not teach the claimed predetermined cycle for controlling distal fluid flow.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(1) a person with a B.S. in engineering or an equivalent field, with two-four years of academic or industry experience in aspiration embolectomy and thrombectomy or comparable industry experience who would, where appropriate, work or consult with others, including a physician, to develop embolectomy or thrombectomy devices; or (2) an interventional neurosurgeon with at least three years of experience developing and/or using medical devices in embolectomy or thrombectomy procedures, and who would, where appropriate, work or consult with others, including an engineer, to develop such a medical device. Pet. 11 (citing Ex. 1005 ¶ 48). Petitioner also contends that, “[a] person with less education but more relevant practical experience, or more relevant education but less practical experience, may also meet this standard.” Id. Patent Owner states that for purposes of its PO Response, it “accepts ¶ 44). We adopt Petitioner’s characterization because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’402 patent and the cited prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“specification explicitly includes sensors similar to those in the prior art in support of their argument that the claimed “predetermined cycle” must not exclude the use of such sensors. Pet. Reply 15 (citing Ex. 1001, 32:55–33:7, 40:66–41:5, 44:9–29). We reviewed the portions of the specification cited by Petitioner. We agree with Patent Owner that one excerpt discussing sensor use appears to be directed to triggering the predetermined cycle rather than causing timing changes during the cycle itself (Ex. 1001, 32:55–66) (describing use of a pressure sensor to “determine when the vacuum channel 3 is clogged by a thrombus and automatically perform the unclogging procedures described herein”), while another excerpt discusses a sensor that Petitioner that the ’402 patent discusses the use of sensors to “tune” the system and that such “tuning” can be done statically (setting the cycle timing in advance) or dynamically (adjusting the timing during the cycle itself). See Ex. 1001, 48:19–49:50. Overall, we find that these disclosures involving sensors demonstrate that sensors may be used in various ways in different embodiments. However, none of these disclosures explicitly discuss the use of sensors in conjunction with a “pre-determined cycle.” Therefore, we find that the ’402 patent specification’s discussion of “sensors” are not particularly informative as to the appropriate construction of a “predetermined cycle” and do not outweigh the other explicit disclosures of “predetermined cycle” in the patent. We next turn to the other intrinsic evidence discussed by the parties — the prosecution history. As discussed by Patent Owner, in the Notice of Allowance, the Examiner found that Garrison did not teach or suggest a “predetermined cycle” because Garrison’s controller “changed the cycle of opening and closing the valves based on feedback from sensors.” Ex. 1004, 86. We acknowledge that the patent applicant filed subsequent comments during prosecution in which they stated that they “do[] not concede that the Examiner’s characterizations of the terms of the claims and the prior art are correct.” Id. at 29. However, we agree with Patent Owner that the importance of the Examiner’s statement in the Notice of Allowance does not rely on it being an express disclaimer (a standard which it does not meet). PO Sur-reply 8. We also considered Petitioner’s contention that the Examiner’s interpretation of Garrison may have been in error (PO Resp. 16); however, even if this were true, the Examiner’s statement still provides helpful insight into how the Examiner was interpreting the term sensors to change the opening and closing of valves during a cycle was not a “predetermined cycle.” Id. at 86. In sum, we find that Patent Owner’s proposed construction is consistent with the usage of the term “predetermined cycle” in the ’402 patent specification and prosecution history. Thus, after considering all of the cited evidence, we construe “predetermined cycle” to mean that “the timing of the sequence of valve operations in the cycle is determined beforehand, i.e., fixed, rather than varying based on feedback after operation begins.”” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“2. Other Terms The parties also provided proposed constructions for the limitations of “[limited/limiting] to a positive amount of exit flow” and “control[ling] fluid flow in and out from the distal end of the catheter.” See Pet. 15–16; Pet. Reply 1–8; PO Resp. 22–24; PO Sur-Reply 2–6. However, having evaluated the arguments and evidence before us, we determine that construction of these terms is not necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that neither Petitioner nor Mr. Brown propose any combination of Yang and Mullins that does not include Mullins’s pressure sensor in order “to control fluid flow in and out from the distal end of the catheter.” Indeed, in addressing the “predetermined cycle” limitation, Mr. Brown contends that Mullins discloses a “cycling controller that ‘varies aspiration pressure according to sensed pressure within the catheter lumen.’” Ex.1005 ¶¶ 131–32 (citing, e.g., Ex.1008, 27:40–28:20 (“[a] novel aspect of this pump system is the incorporation of feedback into the pump algorithm in order to produce more effective pressure cycling”)). This use of a sensor to change pressure during a cycle, is not a “predetermined cycle” under our construction. combinations is its discussion of distal end flow control, not for its sensors.” Pet. Reply 17 (citing Ex. 1035 ¶ 83). However, Petitioner’s obviousness grounds rely on the combination of Yang and Mullins, especially with regard to Mullins’s disclosure of “a controller” in order “to control fluid flow in and out.” As discussed above, Mullins relies on the sensor-feedback approach in order to control flow and we find that Petitioner has not presented persuasive evidence of how the combined disclosures of Yang and Mullins would control flow without using Mullins’s sensor feedback approach. See W.L. Gore & Assocs., Inc. v. Garlock, Inc., 721 F.2d 1540, 1550 (Fed. Cir. 1983) (error to “consider[] … references in less than their entireties, i.e., in disregarding disclosures in [them] … that diverge from and teach away from the invention”). Therefore, we determine that Petitioner has not sufficiently shown that the combination of Yang and Mullins discloses or renders obvious “a controller configured to open and close the vacuum valve and the vent valve in a predetermined cycle to change a level of vacuum at the distal end of the catheter and to control fluid flow in and out from the distal end of the catheter.” Accordingly, having considered the parties’ respective evidence and arguments, we find that Petitioner has not shown by a preponderance of the evidence that claim 1 of the ’402 patent would have been unpatentable as obvious over the combination of Yang and Mullins.” slip op. at 27
Patent outcomesUS 11,406,402 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,406,402 - Alpinestars S.P.A. / Alipinestars USA Inc. v. Dainese S.P.A.Rehearing deniedPTAB · Feb 9, 2026 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Rehearing
The Board denied rehearing, leaving institution denied because Petitioner did not show a reasonable likelihood of prevailing on claims 1–22 under the challenged obviousness grounds.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Petitioner misstates the Decision’s reasoning. As is clear from the previous discussion, we determined that Petitioner’s articulated reasons for combining EP’536 with CN’180 lacked a rational underpinning, not because “EP’536 does not relate to ‘air bags,’” but because the means by which EP’536’s device inflates differs fundamentally from that of CN’180’s device. Dec. 17–18. Petitioner did not acknowledge this critical difference in the Petition, and continues not to do so in its Rehearing Request.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“EP’536 with CN’180 lacked a rational underpinning because EP’536’s inflation mechanism differs fundamentally from CN’180’s inflation mechanism. Dec. 17–18. As we stated, whereas CN’180’s fall-protection belt uses an airbag that requires an external source of pressurized air to inflate, EP’536’s garment does not need an external inflation device because “the gas generating agent 18 in each envelope automatically generates gas and inflates the envelopes in response to rising temperatures.” Id. at 18 (citing Ex. 1004 ¶ 15; Ex. 1005 ¶¶ 5, 19). This difference reflects the fundamentally different purposes of the two devices: CN’180’s device is designed to provide “fall protection” to, e.g., “elderly people,” (Ex. 1005 ¶ 1, 3), whereas EP’536’s device provides “adaptive thermal insulation” for, e.g., garments worn by fire fighters. Ex. 1004 ¶¶ 1–3, 250. Because of the different means by which EP’536’s and CN’180’s devices inflate and the different purposes for doing so, we were not persuaded that one of ordinary skill in the art would have combined the references as Petitioner proposed. Dec. 18. We further noted that the modification would not have improved the reusability of EP’536’s device “by having only one mechanism to recharge,” because EP’536’s “gas generating agent does not need any ‘mechanism to recharge.’” Dec. 18. Instead, we noted EP’536’s teaching that its gas generating agent “automatically recombines or condenses in response to a temperature decrease to return the envelopes, and therefore the garment, to its original thickness, at which point the gas generating agent is ready for subsequent reactivation.” Id. (citing Ex. 1004 ¶¶ 139–141). Finally, we determined that replacing EP’536’s envelopes with CN’180’s airbag “would have made EP’536’s invention unsuitable for its intended purpose: providing a protective garment with ‘adaptive thermal insulation.’” Dec. 19. We stated that “Petitioner does not suggest, and we have found nothing in the record to establish, that CN’180’s airbag would provide this feature.” Id. at 20.” slip op. at 3
- Obviousness (§103) › KSR rationalesMotivation not foundNot shown unpatentable
“rationales for combining EP’536 and CN’180. Reh’g Req. 6–7. First, Petitioner asserts that we “improperly rejected Petitioner’s ‘simple substitution’ evidence in view of [the Board’s] incorrect conclusion that EP’536 does not disclose an ‘external source of inflation [EP’536’s dosing aids].’” Id. at 6 (citing Dec. 18–19). This argument is unpersuasive at least because, as we discussed above, EP’536’s dosing aids do not constitute an external source of inflation. Petitioner further argues that we incorrectly evaluated its “obvious to try” rationale because, contrary to our analysis, Petitioner did in fact identify a problem to be solved by its “finite number of solutions”: “simplify[ing] the design and reduc[ing] the number of required inflation mechanisms.” Id. at 6–7. The Petition’s entire “obvious to try” discussion is as follows: [A] POSITA would have found it obvious to try a one-piece airbag 10 with strip-shaped inflation units 12 in the EP’536- CN’180 airbag system because it would have been a selection from a finite number of identified predictable solutions (i.e., using one chamber with connected individual inflation units 12 versus multiple individual envelopes 20). 5 Petitioner also argues that dosing aids are “needed in order to make the disclosed device reusable.” Reh’g Req. 5–6. This is incorrect, as EP’536 conveys that the reusability of the device is a result of the gas generating agent condensing or recombining when temperatures fall. Ex. 1004 ¶¶ 139– 141. Even if it were true, however, it is unclear how it would support Petitioner’s argument. Pet. 16. As is evident, Petitioner did not identify a design need, market pressure, or other problem that would have been addressed by its identified “solutions,” and therefore we were not persuaded by this rationale. Dec. 19. Petitioner’s attempt to cure this deficiency in its Rehearing Request is tardy. We cannot misapprehend or overlook an assertion that Petitioner fails to make in the Petition. It is also insufficient. Petitioner does not provide any evidence of a known design need or market pressure to “simplify [EP’536’s] design” or reduce the number of “required inflation mechanism” it uses.” slip op. at 7
§ 103 obviousnessPatents in suitUS 12,012,065 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Jan 30, 2026 · IPR2024-01078 · APJ Neil T Powell · IPR · Final written decision
Claims 1–6, 11–15, and 38–43 were not shown unpatentable because Petitioner failed to establish obviousness over the asserted combinations, including the feasibility and motivation to use curved batteries in a ring.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 22; see also Ex. 2018 ¶ 27. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’953 patent and the references cited in the Petition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner expresses that it “does not believe that any term requires express construction.” Pet. 8. “Patent Owner agrees with Petitioner that no terms need to be construed.” PO Resp. 22. We agree with the parties that resolution of their dispute does not require us to construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“be improper hindsight in Petitioner’s position. Petitioner and Dr. Anthony assume that a POSITA would position the battery between Schröder’s ring halves and implement Mestas’s curved battery because it “allows a larger battery to conform to a ring’s circular shape without stressing the battery or ring housing.” Pet. 60, 64–65; Ex. 1002 ¶¶ 337, 351–354. That position, however, ignores alternative designs that are at least equally supported by Schröder’s disclosure (see Ex. 1007, Fig. 3), but would not result in a ring configured as recited in the challenged claims. Petitioner attempts to downplay this concern by characterizing the modification of Schröder’s ring to include Mestas’s curved battery as an obvious “matter of choice” in design. See Reply 10–11 (citing Ex. 1079 ¶¶ 71–77). We disagree. As explained above, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor because they are “5 to 10 times” the size that would be required for a finger ring. PO Resp. 27 (quoting Ex. 2021, 313:12). Petitioner argues that it “does not propose bodily incorporating Mestas’s battery into Schröder’s ring,” which on the surface is correct. See Reply 10. But this does not help Petitioner meet its burden because its actual obviousness theory that “a POSITA would have found it trivial to implement Mestas’s teachings into a ring like Schröder’s ‘finger-ring’” is not persuasive. See Pet. 60 (citing Ex. 1002 ¶ 338). For the same reasons explained in Section II.D.1 above in our analysis of Ground 1, Dr. Mestas’s teaching of a curved battery (Ex. 1002 ¶ 338) in the much smaller form factor of Schröder’s ring is not credible. See Ex. 2021, 315:9–318:9 (acknowledging that it would have been beyond the level of ordinary skill to miniaturize Mestas’s battery, but that a POSITA could try to procure one); 321:5–10 (conceding that he did not try to ascertain whether such a battery was available in the relevant time frame). Instead, we credit Dr. Mercier’s testimony that Petitioner’s proposed modification would have presented intractable practical challenges. Ex. 2018 ¶¶ 228, 230–240 (describing various aspects of battery design that Dr. Anthony did not consider). As before, Dr. Mercier’s testimony is further supported by evidence showing a consistent pattern of flat battery use in prior art finger-ring devices. See, e.g., Ex. 1005 (Niwa), Figs. 22, 29; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 57–67. In sum, Petitioner’s showing for limitation 1[c] is deficient in multiple respects. First, Petitioner assumes that an ordinarily-skilled artisan would have been motivated to implement Mestas’s curved battery in the much smaller interior space occupied by Schröder’s inlay 12 without sufficiently considering the feasibility of that modification or alternative designs suggested by Schröder. Second, even if we accept Petitioner’s purported rationale for the combination (which we do not because we find it that it is predicated on improper hindsight), Petitioner has not shown that an ordinarily-skilled artisan would have had a reasonable expectation of successfully implementing the proposed modification.” slip op. at 46
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“We find that the evidence presented by Patent Owner is sufficient to establish that the Oura Ring Gen. 3 Horizon and Gen. 4 products are commercial embodiments of claim 1 of the ’953 patent and that claim 1 is coextensive in that it encompasses the entire structural apparatus of these products. See PO Resp. 82–92; Ex. 2018 ¶¶ 322–346 (comparing these products to claim 1); Ex. 2029; Ex. 2030; Ex. 2118; Ex. 2119.9 Indeed, Petitioner does not challenge any aspect of Dr. Mercier’s limitation-by-limitation analysis showing that these products practice claim 1. But more than just practicing the claimed invention, Patent Owner’s evidence supports that claim 1 recites the overall structure that provides for the particular form factor of the Oura Ring Gen. 3 Horizon and Gen. 4 products, i.e., a fingerring “wedding band” design that allows for the electronic components to be entirely contained within the ring housing with a curved external surface having no protrusions or bulges. Ex. 2018 ¶¶ 359–360; see also id. ¶¶ 322–346 (pictures depicting wedding band design of the Oura Ring Gen. 3 Horizon and Gen. 4 products); Ex. 2019 ¶¶ 47–49 (“[Patent Owner’s] decision to highlight the ring form factor indicates this feature’s importance to the marketplace success of the Oura Ring.”). We disagree with Petitioner’s assertion that the Oura Ring Application and/or Oura Membership are essential, unclaimed features such that a presumption of nexus is not appropriate. The Oura Application functions in conjunction with the Oura Ring to form a “complete solution” 9 Patent Owner and Dr. Mercier only compare these products to claim 1. Patent Owner has not demonstrated a nexus to independent claim 38. ¶¶ 20–21. The Oura Application cannot receive or display any information absent the Oura Ring’s ability to collect the information from the user. Id. Even though the Oura Application may provide additional unclaimed functionality, such as displaying activity, sleep, and readiness scores based on the data collected by the Oura ring that allow “a user to take advantage of the ring’s offerings,” this functionality is secondary to the ring’s ability to collect that data, without which, the Oura Application would serve no purpose. See Ex. 2019 ¶ 21; Ex. 2024, 93:22–95:22. As the Federal Circuit has explained, “there is rarely a perfect correspondence between the claimed invention and the product.” Fox Factory, 944 F.3d at 1374. Here, we find that on the spectrum of “unclaimed features,” the Oura Ring Application is closer to the “insignificant features” end because, while it allows the user to access and interpret data tracked by their Oura Ring, it does not materially impact the functionality of the Oura Ring or its structure.10 See Teva 8 F.4th at 1361 (explaining that “like the coextensiveness requirement itself, the concept of unclaimed features is best viewed as part of a spectrum”).” slip op. at 27
Patent outcomesUS 10,281,953 not shown unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,281,953 - 3d Diagnostix, Inc. v. Watson Guide IP, LLCAll claims unpatentablePTAB · Jan 27, 2026 · PGR2024-00040 · APJ James A Tartal · PGR · Final written decision
Claims 1–3, 5–7, 10, 12, 14, 16, and 17 are unpatentable under § 103, including over Llop ’126 and Sichuan, and over Llop ’126, Sichuan, and Scherer for claims 5, 6, and 12.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for patent owner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art as of the earliest priority date of the ’209 patent “would at least have had a doctoral degree in dentistry and at least three to four years of experience working with guided dental surgery for installing dental implants and prostheses.” Pet. 13 (citing Ex. 1003 ¶ 49). Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 4. Based on our review of the record before us, we adopt Petitioner’s uncontested definition of a person of ordinary skill in the art, because it is supported by the evidence of record and consistent with the disclosure in the ’209 patent and in the asserted prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“1. “drill guide” and “fixation base” Petitioner contends that the claim terms “drill guide” and “fixation base” require construction “to resolve certain of the unpatentability grounds presented.” Pet. 13–14. In particular, Petitioner proposes that “drill guide” means “drill guide made from metal or metallic alloy without traditional plastic or acrylic,” and that “fixation base” means “fixation base made from metal, metallic alloy or other strong material without traditional plastic or acrylic.” Id. According to Petitioner, the Specification “teaches that the composition of the drill guide is ‘a metal or metallic alloy,’” and provides no other alternatives. Id. at 14 (citing Ex. 1001, 5:35–36). Petitioner similarly alleges that “fixation base” is described as “being fabricated from a metal, metal alloy, or other strong material,” and that “traditional plastic or acrylic” is excluded in light of disclosures in a provisional application. Id. at 21–24. According to Petitioner, its proposed constructions should be adopted “based on disclaimer of claim scope in the provisional application incorporated into the [’209] patent specification.” Id. at 14–24. Patent Owner contends that we need not address the constructions proposed by Petitioner because the issues addressed by Petitioner’s proposed constructions only concern allegations of unpatentability directed to claims 11 and 13, which Patent Owner disclaimed. Resp. 4–5; Disclaimer 1. In Reply, Petitioner argues that its proposed constructions are relevant to Patent Owner’s evidence of objective indicia of non-obviousness, including the alleged nexus. Reply 18–19 n.3. In light of our analysis below, because no determination in this Decision turns on whether we adopt Petitioner’s proposed constructions of “drill guide” and “fixation base,” we find that no express construction of these terms is required. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“substitution of the word ‘enclose’ for the term ‘surround.’” Sur-reply 6. We noted in the Institution Decision that “construing the claim term ‘surround’ to mean ‘enclose’ does not further inform or clarify to a person of ordinary skill in the art what is encompassed by the claim limitation.” Dec. 15. We reach the same conclusion here on the full record and find no basis to rewrite the Challenged Claims to replace “surround” with “enclose.” To the extent Patent Owner can be understood to suggest that we import additional limitations into the claims based on the exemplary figures in the ’209 patent, we decline to do so. Regardless, given the recognition by the Parties that “surround” and “enclose” are synonymous, our determinations in this Decision would have been the same had we adopted Patent Owner’s proposed definition of “surround” to mean “enclose.” Further, with regard to the claim language “configured and dimensioned to surround at least a portion of the teeth of the patient,” Patent Owner proposes construing “a portion of the teeth” as “at least some teeth.” Resp. 9 (citing Ex. 2007 ¶ 44). Patent Owner, however, offers no sufficient explanation in its Response to explain how why a “portion of the teeth” means “at least some teeth.” The Specification does not provide an explicit definition of “a portion of the teeth” and does not suggest an intention to use a meaning of the term “a portion of the teeth” that is particular to the ’209 patent. To the extent Patent Owner can be understood to imply that we should import additional limitations into the Challenged Claims based on the exemplary figures in the ’209 patent, we decline to do so. For that reason, alone, we decline to adopt Patent Owner’s proposed construction.” slip op. at 17
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“38; Sur-reply 9–10. First, Patent Owner argues that Sichuan is non-analogous art. Resp. 34–38. “To be considered within the prior art for purposes of the obviousness analysis, a reference must be analogous.” Circuit Check Inc. v. QXQ Inc., 795 F.3d 1331, 1335 (Fed. Cir. 2015) (citing Wang Labs., Inc. v. Toshiba Corp., 993 F.2d 858, 864 (Fed. Cir. 1993)). “Two separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed and, (2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” Sanofi-Aventis Deutschland GmbH v. Mylan Pharms. Inc., 66 F.4th 1373, 1377 (Fed. Cir. 2023) (quoting In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004)).” slip op. at 36
Patent outcomesUS 11,806,209 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,806,209 - Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentablePTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed
“We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached
“Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12
Patent outcomesUS 11,780,689 unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 11,780,689 - PTAB · Dec 19, 2025 · IPR2025-01078 · APJ Robert L Kinder · IPR · Institution
The Board instituted IPR on claims 1, 2, 4–12, 14–22, and 24–30, finding a reasonable likelihood that Kido anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. at 2. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1011, 5:18–21. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’371 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner proposes “a person having at least a Bachelor’s Degree in electrical engineering, computer science, or computer engineering, or undergraduate training in an equivalent field and at least two years of relevant experience in electronic gaming technology.” Pet. 10 (citing Ex. 1003 ¶¶ 22–26). Petitioner further notes that “[a]dditional graduate education could substitute for professional experience, and significant work experience could substitute for formal education.” Id. Patent Owner does not dispute this level of skill. See Prelim. Resp. 13–14 (“Evolution does not set forth an alternative level of skill for a person of ordinary skill in the art”). For purposes of this Decision, we adopt Petitioner’s proposal, which comports with the teachings of the ’371 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “a first selected position . . . to have an increased payout . . . greater than a first non-selected payout.” See Pet. 25–27, 30, 35, 36. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a payout that does not receive the Prog bonus. Pet. 35–36 (“had the first selected position not been randomly selected, the player would only be eligible for the basic payout”). Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129.” slip op. at 14
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,756,371 - PTAB · Dec 17, 2025 · IPR2025-01072 · APJ Frederick C Laney · IPR · Institution
The Board instituted review of claims 1–3, 5–11, 13–19, and 21–24 on all asserted grounds, finding a reasonable likelihood that Kido anticipates claims 1, 9, and 17.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” Sur-reply 2. We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1001, 5:16–17. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’014 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Reference is prior artInstituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “first payout . . . wherein the first payout is higher.” See Pet. 32–36. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a first payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a second payout that does not receive the Prog bonus. Id. at 35. Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129.” slip op. at 14
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 11,011,014 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Dec 17, 2025 · IPR2024-01077 · APJ Michael A Valek · IPR · Final written decision
Claims 1, 11, and 13–20 were not shown unpatentable over either Yuen and Mestas or Schröder and Mestas, principally because the curved-battery and waterproof-cavity showings were deficient.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“We agree with Petitioner that the term “ring” is not limited to a finger- worn ring. All of the challenged independent recite a “wearable ring computing device” (claims 1 and 11) or “ring computing device” (claim 14). Nothing in the claim language itself refers to where that device is worn. Moreover, the fact that Patent Owner has in several related patents added claim language to expressly recite a ring that is “finger-worn” or “worn around the finger” evidences that the plain meaning of the term “ring” by itself does not require such. Ex. 1362, 44:45–46:61 (claims 1–18); Ex. 1363, 44:64–46:56 (claims 1–17); Ex. 1364, 48:22–23 (claim 1); see Nystrom v. TREX Co., Inc., 424 F.3d 1135, 1143 (Fed. Cir. 2005) (explaining that the fact that another claim recites a “wood decking board” suggests the term “board” is not itself limited to one made from wood or cut from a log because “[w]hen different words or phrases are used in separate claims, a difference in meaning is presumed”). This understanding is further supported by the Specification of the ’859 patent. It is true, as Patent Owner asserts, that the Specification describes a preferred embodiment that is a finger-worn ring. See, e.g., Ex. 1001, Figs. 22A–B, 23A (depicting a finger-worn ring). But precedent cautions against importing limitations from the preferred embodiment into claims. See, e.g., Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2004) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”). Indeed, the Specification here anticipates such arguments and makes clear that the applicants’ wearable computing device (WCD) is not limited to a ring worn on the finger: The WCD can be in the form of a ring that can be worn on the finger of a human (or animal) user. Although the WCD of the present disclosure is depicted as a ring that can be worn on the finger of a user, other shapes, designs, and form factors can be utilized for the WCD. For example, the WCD can be in the form of a wrist band, bracelet, necklace, earring, or any other type of wearable accessory. In this regard, references to the finger of a user in the present application can be considered to apply to other portions of a human body depending on the form of the WCD, such as wrist, neck, ear, etc. Ex. 1001, 8:51–61.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“ordinarily-skilled artisan to modify Yuen’s device to form the waterproof cavity recited in claim 1, much less explain the particular modifications Petitioner contends that artisan would have made to Yuen’s device housing to achieve such. This is particularly problematic given that the figures Petitioner relies upon in Yuen and Mestas uniformly depict larger, wrist/arm-band type devices. See Ex. 1006, Figs. 2–13, 12:52–55 (depicting a “wrist-worn or arm-mounted accessory such as a watch or bracelet”); Ex. 1010, Figs. 1–6, ¶ 151 (same). Thus, Petitioner’s obviousness theory requires multiple modifications to Yuen’s depicted structure: (1) modifying the identified portions of Yuen’s device housing so that they form a waterproof cavity therebetween; and (2) shrinking that device and its components down to a ring designed to fit around a single toe. We credit Dr. Mercier’s testimony that such modifications would require a “complex” re-engineering of Yuen’s existing structure that Petitioner and Dr. Anthony do not sufficiently explain. See Ex. 2018 ¶¶ 108–109, 129–130, 137–138. The testimony in Dr. Anthony’s supplemental declaration does not provide the missing explanation. Dr. Anthony continues to assert that Yuen’s sensor protrusion is sealed in the space between the alleged bounding members, relying on the same annotated versions of Figures 4 and 5, without addressing the fact that according to Petitioner’s own annotations those bounding members only form a shell that is open to the attachment band at either end. See Ex. 1079 ¶¶ 26–28. Indeed, Dr. Anthony appears to acknowledge that Yuen only teaches attaching the sensor module portion of the alleged cavity with watertight glue, but asserts that “it would not make sense to have a device that is waterproof in some areas and not others.” Id. ¶ 29. That assertion, however, is not supported by anything beyond Dr. Anthony’s say-so and ignores that Yuen’s teachings regarding a watertight seal/glue refer only to the sensor package portion of the alleged cavity. See Ex. 1006, 14:66–15:4, 15:10–14. Dr. Anthony’s assertion that Mestas teaches additional “waterproofing techniques” that could be applied to Yuen’s housing is similarly cursory. See Ex. 1079 ¶ 30. He does not identify what those techniques are or how a POSITA would use them to modify Yuen. Id. Accordingly, we do not credit this testimony.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“the asserted evidence of secondary considerations and a patent claim if the patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988) (emphasis added)). “That is, presuming nexus is appropriate when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.” Id. (internal quotation marks omitted). If, on the other hand, “the thing that is commercially successful is not coextensive with the patented invention—for example, if the patented invention is only a component of a commercially successful machine or process, the patentee is not entitled to a presumption of nexus.” Id. (internal quotation marks omitted).” slip op. at 33
Patent outcomesUS 10,139,859 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,139,859 - PTAB · Dec 16, 2025 · IPR2025-01046 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 2–15, finding a reasonable likelihood that the 1946 Cyclopedia, Lindström, and Wong render at least claim 2 obvious; claim 1 was disclaimed.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner responds that Petitioner’s proposed level of ordinary skill in the art is incorrect, “because design or analysis experience with other industrial wheeled vehicles would not necessarily be applicable to the art of the ’892 Patent.” Prelim. Resp. 12 (citing Ex. 2035 ¶¶ 38–39). According to Patent Owner, a person of ordinary skill in the art “would have at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Id. (citing Ex. 2035 ¶¶ 34, 38). The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years 5 Because Patent Owner statutorily disclaimed claim 1, this ground is moot. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 12. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted.” slip op. at 12
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge would not.” Prelim. Resp. 12–13 (citing Ex. 2035 ¶ 39). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this stage, we need not construe expressly any claim term to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing on at least one challenged claim. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))” slip op. at 14
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“been obvious over the 1946 Cyclopedia and Wong. Weighing the parties’ arguments and evidence, we find Petitioner provides sufficient rational underpinning for its assertion that it would have been obvious in view of Wong to implement a cross-wise extending beam to reinforce the 1946 Cyclopedia’s NSC ore car’s end slope sheet. Pet. 52–53; Prelim. Resp. 28– 30. In response to Petitioner’s assertion that “[t]he upper, outboard end of [Wong’s slope sheet 26] is reinforced by a cross-wise, L-shaped beam positioned under the slope sheet,” Patent Owner argues that “Wong does not provide reinforcement, but simply shows two sheets being connected for lading containment and load transfer.” Pet. 52; Prelim. Resp. 29. At this stage, we find Petitioner has the better position. Although we agree with Patent Owner that Wong shows two sheets connected to one another, that does not negate Petitioner’s correct observation that Wong shows an upper end of its end slope sheet 26 resting on an L-shaped structure, which apparently would reinforce end slope sheet. Pet. 52; Ex. 1003 ¶ 56. reason to look to Wong in the first place,” we again find that Petitioner has the better position at this stage. Prelim. Resp. 29. For example, Wong’s disclosure of “hopper railcar 10” (Ex. 1006, 3:6–9) and the 1946 Cyclopedia’s disclosure of “Freight Cars: Hopper Ore” (Ex. 1004, 27–28; Ex. 1054, 27–28) support Petitioner’s position that “Wong and the 1946 Cyclopedia are in the same field.” Pet. 52; see also id. at 76 (“Wong discloses a rail road hopper car (‘hopper railcar’ 10)”), 18–19 (“The ore-car section of the 1946 Cyclopedia—entitled ‘Freight Cars: Hopper Ore’— contains drawings and a photograph of an ore car manufactured by Patent Owner NSC.”); Ex. 1003 ¶ 56 (“Wong and the 1946 Cyclopedia are in the same field of hopper railcars”) (citing Ex. 1004, 27–28; Ex. 1006, code [57]). This position is not persuasively rebutted by Patent Owner’s argument that Wong’s hopper railcar 10 uses aluminum and steel together for certain reasons. Prelim. Resp. 28–29.” slip op. at 23
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,166,892 - PTAB · Dec 16, 2025 · IPR2025-01047 · APJ Hyun J Jung · IPR · Institution
The Board instituted IPR of claims 1–44 on all presented challenges, finding a reasonable likelihood that FreightCar would prevail on at least one claim based on Hart, the 1906 Cyclopedia, and Wong.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and for the reasons explained below, we determine that Petitioner has shown a reasonable likelihood of prevailing with respect to at least one of the challenged claims. Thus, we institute an inter partes review of claims 1–44 of the ’515 patent on all presented challenges. 37 C.F.R. § 42.108(a) (2024) (“When instituting . . . review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”); see also SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Pet. 29; Prelim. Resp. 9. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 9. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted. Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“to further support the upper, outboard end of the slope sheet with a crosswise, L-shaped beam as in Wong,” and one of ordinary skill in the art would have been motivated to do so, because of “the benefits of reinforcing the slope sheet at its upper end, where its connection with another structure creates a stress concentration.” Pet. 63 (citing Ex. 1003 ¶ 108). Petitioner points to Hart’s transverse beam b3 and argues that it suggests using a transverse beam like Wong if Hart is modified so that upper beam b3 no longer supports the slope sheet. Id. (citing Ex. 1008, Fig. 1). Petitioner also argues that the references are in the same field and that there would have been a reasonable expectation of success. Id. at 63–64 (citing Ex. 1003 ¶ 108; Ex. 1008, Fig. 1). Based on the preliminary record, Petitioner shows that its proposed combination of Hart, the 1906 Cyclopedia, and Wong teaches or suggests the above-quoted limitations of claim 24 and that one of ordinary skill in the art would have combined those references in the manner asserted with a reasonable expectation of success.” slip op. at 19
§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,132,515
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.