• Jumio Corp. v. Facetec, Inc.No claims unpatentable
  PTAB · Jun 17, 2026 · IPR2025-00108 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 1–24 were not shown unpatentable because the asserted combinations lacked adequate motivation to combine and did not teach capturing images at different distances.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 13–14. In particular, based on the teachings of the ’938 patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’938 patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “images are three dimensional—let alone a technique that captures two images at different distances, compares the images for certain differences, and verifies three dimensionality based on those differences, as recited by the claim. Instead, Tanii describes a system that “corrects warp in which the perspective is exaggerated when an image is captured with the user’s face at close range.” Ex. 1007, code (57). In particular, Tanii recognizes the physical phenomenon of perspective distortion (fish-eye distortion) where “[i]f the image of the face of a person or the like is captured from a point that is relatively nearby, an image is obtained in which the perspective appears exaggerated,” i.e., the user image is warped or distorted. Id. ¶ 6; see id. ¶ 48, Fig. 4B. Tanii corrects such warped images by enlarging peripheral areas of the user image. Id. ¶¶ 55–56.” slip op. at 17

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “distance from the user. Derakhshani teaches two different approaches: (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 12 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Derakhshani, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, instead, focused specifically on the use of the word “slid” in Derakhshani as indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Derakhshani, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject.” slip op. at 27

  Patent outcomesUS 11,693,938 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 11,693,938
• Jumio Corporation v. Facetec, Inc.No claims unpatentable
  PTAB · Jun 17, 2026 · IPR2025-00107 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–20 were not determined unpatentable because the petition did not establish motivation to combine the references or that they taught capturing images at different distances.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 8. In particular, based on the teachings of the ’606 Patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’606 Patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations—“substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques—are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 12–16; Pet. Reply 6–7. These motivations might have been suitable had Tanii described techniques for verifying three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 12–16, 19–23. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond with approaches for verifying three-dimensionality, and so does not adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 16

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusObjective indicia outweighedDecided for patent owner

    “Patent Owner has demonstrated a nexus by showing that certain objective indicia, discussed below, are the direct result of the unique characteristics of the claimed invention. As discussed above in our summary of the ’606 Patent and reflected in our discussion of Petitioner’s obviousness challenges (see §§ I.F, II.E.1, II.E.2, II.E.3), the unique characteristics of the claim relate to verification of three dimensionality by comparing two images taken at different distances for perspective distortion. Indeed, those features are what distinguish over the prior art. See id. Furthermore, Patent Owner, supported by testimony from its Chief Technology Officer, Mr. Rose, asserts the unique characteristics claimed are reflected in the “3D liveness checks” its ZoOm software product provides because ZoOm “confirms that a user is 3D by comparing images taken at different distances for expected differences in biometric data, such as the presence of appropriate perspective distortion and differences.” PO Resp. 25 (citing Ex. 2059 ¶ 49). Patent Owner’s assertion is further supported by a “FaceTec Software Explanation” stating that its software uses “near & far image data . . . to determine if the expected differences in perspective distortion are present in the image data” and, from that, “decides if there is sufficient evidence in the image data to conclude with a high degree [of] confidence that the image data contains first-generation biometric data captured in real-time from a live, physically present user.” Ex. 2067; see PO Resp. 25–26. As such, the 3D liveness checks provided by Patent Owner’s software are indicative of the unique characteristics of the claimed invention and, as we discuss below, certain objective indicia of nonobviousness have a direct nexus to the 3D liveness checks of its software.” slip op. at 30

  Patent outcomesUS 11,157,606 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,157,606
• Jumio Corp. v. Facetec, Inc.No claims unpatentable
  PTAB · Jun 17, 2026 · IPR2025-00106 · APJ Nabeel U Khan · IPR · Final written decision

  The Board determined claims 1–20 were not unpatentable because Jumio did not show sufficient motivation to combine the references or that they taught capturing images at different distances.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 11–12. In particular, based on the teachings of the ’471 patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’471 patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations—“substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques—are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 12–16; Pet. Reply 6–7. These motivations might have been suitable had Tanii described techniques for verifying three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 13–17, 25–28. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond with approaches for verifying three-dimensionality, and so does not adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 18

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “none of the relied upon references teach capturing two images at two different distances, as required by limitations 1[d3] and 1[d4]. These limitations recite “moving the camera from a first location to a second location, the second location being a second distance from the user” and “capturing at least one second image of the user taken with the camera of the computing device at the second distance from the user, the second distance being different than the first distance.” Derakhshani does not teach capturing a second image at a second distance from the user. Derakhshani teaches two different approaches: (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 13 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Ex. 1005, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, instead, focused specifically on the use of the word “slid” in Derakhshani as indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Derakhshani, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject.” slip op. at 27

  Patent outcomesUS 10,776,471 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,776,471
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• Dr. Falk Pharma GmbH v. Ellodi Pharmaceuticals, L.P.Adverse judgment
  PTAB · Jun 3, 2026 · PGR2025-00086 · APJ Tawen Chang · PGR · Adverse judgment

  The Board granted Patent Owner’s request for adverse judgment and terminated the PGR as to claims 1–34 after Patent Owner disclaimed all challenged claims.

  RulingsAdverse judgment

  • Adverse judgmentAdverse judgmentGranted

    “A party may request judgment against itself at any time during a proceeding,” including by “[d]isclaimer of the involved application or patent” or “[c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. §§ 42.73(b)(1)–(b)(2). Accordingly, we grant Patent Owner’s Request for Adverse Judgment and terminate the proceeding. slip op. at 2

  None
  Patents in suitUS 12,290,598
• Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 3, 2026 · IPR2025-00257 · APJ Lilan Ren · IPR · Final written decision

  Claims 1–15 are unpatentable because Petitioner proved by a preponderance of the evidence that the asserted § 103 grounds render them unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “proceeding, we determine Petitioner has proven by a preponderance of the evidence that each of claims 1–15 of the ’660 patent is unpatentable.” slip op. at 85

  Patent outcomesUS 9,592,660 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,592,660
• Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution denied
  PTAB · May 18, 2026 · IPR2025-00278 · APJ David Cotta · IPR · Institution

  The Board denied institution of Berkshire Hathaway Energy Company and PacifiCorp’s petition because it had instituted the earlier-filed IPR2025-00274 challenging the same patent.

  RulingsInstitution decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “request from Patent Owner for Director Review, finding that Patent Owner introduced “evidence sufficient to put RPI and privity at issue” and remanding with instructions to “allow discovery, narrowly tailored to resolve the RPI and privity issues” including “at least materials sufficient to clarify the evidence the Board found to be ‘ambiguous’ and to avoid the need for the Board to ‘speculate as to the nature of the redacted material.’” Paper 57 (Decision on Request for Director Review). The Director instructed that after allowing such discovery, we “should then determine on the full record whether Petitioners have met their burden of demonstrating that the Petitions are not time-barred under § 315(b), applying the framework set forth in Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242–44 (Fed. Cir. 2018). Concurrently herewith, we issue a decision in IPR2025- 00278 finding that Petitioner has met its burden of demonstrating that its Petition is not time-barred under 35 U.S.C. § 315(b).” slip op. at 2

  • Other 314aInstitution denied discretionary otherInstitution denied

    “Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00274, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00274, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00274 . . . before IPR2025-00278.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00274. For the reasons discussed in our concurrently issued decision in IPR2025-00274, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00274. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’114 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00274 before IPR2025-00278, we deny institution of the Petition in this proceeding.” slip op. at 3

  Discretionary denial
  Patents in suitUS 10,343,114
• Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution denied
  PTAB · May 18, 2026 · IPR2025-00281 · APJ David Cotta · IPR · Institution

  The Board denied institution because it had instituted IPR2025-00280 challenging the same patent, consistent with the Director’s instruction to maintain at most one IPR.

  RulingsInstitution decision

  • Other 314aInstitution denied discretionary otherInstitution denied

    “Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00280, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00281, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00280 . . . before IPR2025-00281.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00280. For the reasons discussed in our concurrently issued decision in IPR2025-00280, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00280. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’517 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00280 before IPR2025-00281, we deny institution of the Petition in this proceeding.” slip op. at 3

  Discretionary denial
  Patents in suitUS 10,596,517

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.