- X Corp. v. Sterling Computers CorporationAll claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00299 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–22 are unpatentable as obvious over the stated Dumais-based and Kircher/Krug grounds; Patent Owner’s and Petitioner’s motions to exclude are dismissed as moot.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Our Institution Decision adopted Petitioner’s definition of a person of ordinary skill in the art. Inst. Dec. 8–9. In its response, Patent Owner adopts Petitioner’s proposed level of ordinary skill. See PO Resp. 14–15 (“Patent Owner and its expert adopt the Board’s definition for purposes of this Response”). Having considered the record, we continue to adopt Petitioner’s proposed level of skill, as articulated above. We are satisfied that Petitioner’s proposal comports with the level of skill necessary to understand and implement the teachings of the ’217 Patent. Accord Inst. Dec. 8–9.” slip op. at 9
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededNot reached
“1. “computer program modules” The parties dispute whether four “computer program modules comprising” (1) “a monitoring module,” (2) “a first relevance measurement module,” (3) “a second relevance measurement module,” and (4) “a relevance analysis module” (collectively, “module limitations”) invoke 35 U.S.C. § 112 ¶ 6 and should be treated as means-plus-function limitations. See Pet. 8–18; PO Resp. 15–18; Pet. Reply 3–5; PO Sur-reply 4–7. However, the parties do not argue that the construction of these terms affects the analysis of Petitioner’s challenges. See PO Resp.; Pet. Reply; PO Sur-reply. Moreover, our analysis does not rely on any particular construction of these terms and, so, we need not resolve this dispute.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“2. “one or more measures derived from the group consistent of” Petitioner asserts limitations 1[g] and 1[g][i]–1[g][iv] recite an open Markush group listing alternatively useable members. Pet. 20–21 (citing Gillette Co. v. Energizer Holdings, Inc., 405 F.3d 1367, 1372 (Fed. Cir. 2005); Abbot Lab’ys v. Baxter Pharm. Prod., Inc., 334 F.3d 1274, 1281 (Fed. Cir. 2003) (explaining that the listing of specified alternatives within a claim is referred to as a Markush group or Markush grouping)); See Ex. 1001, 47:47–58. Patent Owner does not dispute Petitioner’s construction. See PO Resp; PO Sur-reply. As these terms are not in controversy, we need not opine on this construction.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANo construction neededNot reached
“Petitioner’s and Patent Owner’s respective constructions overlap in their requirement that “cognate” users share similar past user actions and assessments or are defined by similar direct input by the user. See Pet. 18; PO Resp. 20–21; PO Sur-reply 10. Petitioner argues that Patent Owner’s construction “exclude[s] ‘groups’ from the claims” and further limits the scope of to users who share actions (Pet. Reply 8–9), but Patent Owner states that its proposed construction does not so limit the claims (PO Sur-reply 10). As such, there is no disagreement that “cognate” users share similar past user actions and assessments or are defined by similar direct input by the user. As there is no controversy, we need not, and do not, construe the meaning of “cognate.” However, Patent Owner’s requirement that “at least one other of the plurality of users” is specifically cognate to “the user” who was sent the content is plainly recited in the claim language itself. The claim recites a “relevance score of a piece of electronic content sent from a sender to a user” in the preamble and similarly again in limitation 1[g]. See Ex. 1001, 47:25–28 (emphasis added), 45:62–64. The limitation in question directly references the claimed “user” when reciting the cognate relationship: “identify at least one other of the plurality of users . . . that is cognate to the user.” Ex. 1001, 47:43–45 (emphasis added). As such, the claim language plainly supports Patent Owner’s requirement and Petitioner does not contest that requirement. See Pet. Reply 8. least one other of the plurality of users . . . that is cognate to the user” as requiring that the identified other user is cognate specifically to the user whose relevance score is being determined.” slip op. at 12
Patent outcomesUS 7,716,217 unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 7,716,217 - Apple Inc. v. DH International Ltd.All claims unpatentablePTAB · Apr 16, 2026 · IPR2025-00172 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–20 are unpatentable as obvious over Suga and Gorsuch; the Board denied Patent Owner’s motion to exclude.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“Patent Owner also asserts prejudice for “not knowing” which Suga Exhibit “the Petitioner and Petitioner’s expert is relying on (see Exhibit 1021 and 1022),” without further explanation. Mot. Reply 6. Exhibit 1022 is a dictionary definition of “node.” How this relates to Patent Owner’s argument of prejudice is not explained. Id. at 5–6. The Board perceives no difficulty following Petitioner’s arguments and evidence, which cite Suga Exhibit 1005, including the testimony of Dr. Buehrer regarding the English language translation of Suga, which is identical in Exhibits 1005 and 1017. Patent Owner, moreover, opted not to depose Dr. Buehrer, did not file a deposition transcript of Dr. Buehrer in this proceeding, and does not allege any difference or substantive deficiency in the English language translation in Suga Exhibits 1005 and 1017, which are identical. We fail to see any prejudice to Patent Owner.” slip op. at 84
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“d. Conclusion for Claim 1 For the reasons given above, we determine the Petition establishes by” slip op. at 60
Patent outcomesUS 9,022,294 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,022,294 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Expert testimonyPatent owner expert creditedDecided for patent owner
“gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00917 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103 over Chang and Jin, alone or with Seo or Watanabe; the Jin and Feldmann grounds were not shown.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10
- Expert testimonyPatent owner expert creditedDecided for patent owner
“We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable
“Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32
Patent outcomesUS 10,230,009 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00186 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board found the combination disclosed the claimed isolation portion and supported the challenged claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id. Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed
“edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00007 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under §103 over Chang and Jin because the combination teaches the claimed isolation portion and the claimed tapering.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightTeaching away not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide.” slip op. at 18
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Qualcomm Incorporated v. Cobblestone Wireless, LLCSome claims unpatentablePTAB · Mar 5, 2026 · IPR2024-01336 · APJ Russell E Cass · IPR · Final written decision
Claims 1–4, 6–9, 24, and 25 are unpatentable; claims 10, 13, 14, 17, and 21–23 were not shown unpatentable, principally due to missing limitations or insufficient motivation to combine.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“information” should be given its plain and ordinary meaning as “data,” and that Patent Owner’s narrower construction of “first information” and “second information” lacks sufficient support in the intrinsic record. We agree with Petitioner that the ’802 patent Specification defines “information” as data when it uses the phrase “information (i.e., data).” See Ex. 1001, 5:60–62 (“Information (i.e., data) to be transmitted may be received in a baseband digital system 250, such as a wireless digital baseband processor.” (emphasis added)), 11:30–32 (“In this example, the signals 911 and 912 carry the same information (data).” (emphasis added)). As the Federal Circuit has explained, a “specification’s use of ‘i.e.’ signals an intent to define the word to which it refers.” Edwards Lifesciences LLC v. Cook Inc., 582 F.3d 1322, 1334 (Fed. Cir. 2009). slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“argument based on Fernandez alone, we find that Petitioner has not provided a sufficient evidentiary basis to support a motivation to remove the amplification from each of Fernandez’s signal generators 10A-10E and add a single power amplifier instead. See Pet. 76–77 Ex. 1003 ¶ 235. Petitioner’s only rationale for this modification to Fernandez is that “[a] single amplifier has several advantages compared to multiple amplifiers, including lower complexity, a single (vs. multiple) potential point of failure, and lower cost,” and that one of ordinary skill “would have found a single amplifier to be a simple matter of design preference.” Pet. 76–77. Dr. Almeroth simply repeats these cursory allegations without providing any further explanation or evidentiary support. Ex. 1003 ¶ 235. Moreover, Dr. Cooklev provides credible testimony that replacing Fernandez’s amplification in signal generators 10A–10E with a single amplifier would not necessarily have the advantages that Petitioner suggests. See Ex. 2013 ¶¶ 99, 104–105. For example, Dr. Cooklev testifies that a single amplifier would need to have a wider bandwidth than the multiple amplifiers used in Fernandez, which could cause potential stability issues. Id. ¶ 105. According to Dr. Cooklev, this wider bandwidth would require more circuit elements, and thus would not provide the reduction in space usage and power consumption that Petitioner asserts. Id. According to Dr. Cooklev, Montojo also points to several “substantial, and potentially impractical, drawbacks” of using a single amplifier for multiple signal generators, including power constraints imposed by spectral emission requirements and on-board battery capacity. Id. ¶ 104 (citing Ex. 1006 ¶¶ 7– 8). In light of this testimony, which we find credible, Petitioner has failed to provide sufficient explanation or evidence to support its assertion that one of ordinary skill would have found it obvious to replace the multiple amplifiers in Fernandez’s signal generators with a single amplifier.” slip op. at 65
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“argument based on Fernandez alone, we find that Petitioner has not provided a sufficient evidentiary basis to support a motivation to remove the amplification from each of Fernandez’s signal generators 10A-10E and add a single power amplifier instead. See Pet. 76–77 Ex. 1003 ¶ 235. Petitioner’s only rationale for this modification to Fernandez is that “[a] single amplifier has several advantages compared to multiple amplifiers, including lower complexity, a single (vs. multiple) potential point of failure, and lower cost,” and that one of ordinary skill “would have found a single amplifier to be a simple matter of design preference.” Pet. 76–77. Dr. Almeroth simply repeats these cursory allegations without providing any further explanation or evidentiary support. Ex. 1003 ¶ 235. Moreover, Dr. Cooklev provides credible testimony that replacing Fernandez’s amplification in signal generators 10A–10E with a single amplifier would not necessarily have the advantages that Petitioner suggests. See Ex. 2013 ¶¶ 99, 104–105. For example, Dr. Cooklev testifies that a single amplifier would need to have a wider bandwidth than the multiple amplifiers used in Fernandez, which could cause potential stability issues. Id. ¶ 105. According to Dr. Cooklev, this wider bandwidth would require more circuit elements, and thus would not provide the reduction in space usage and power consumption that Petitioner asserts. Id. According to Dr. Cooklev, Montojo also points to several “substantial, and potentially impractical, drawbacks” of using a single amplifier for multiple signal generators, including power constraints imposed by spectral emission requirements and on-board battery capacity. Id. ¶ 104 (citing Ex. 1006 ¶¶ 7– 8). In light of this testimony, which we find credible, Petitioner has failed to provide sufficient explanation or evidence to support its assertion that one of ordinary skill would have found it obvious to replace the multiple amplifiers in Fernandez’s signal generators with a single amplifier.” slip op. at 65
- Expert testimonyPatent owner expert creditedPetitioner expert discountedOther
“We find credible and agree with Dr. Cooklev’s testimony that the predistortion signals from tables 17-1 and 17-2 “are cancelled out by Suzuki’s amplifier” 28. Ex. 2013 ¶ 50. Dr. Cooklev supports his opinion by referring to paragraph 1 of Suzuki, which states that Suzuki’s invention is directed to “a multi-band lookup table type predistorter” (such as the one implemented using lookup tables 17-1 and 17-2 in Figure 6) that “compensates for a distortion of a power amplifier.” Ex. 2013 ¶ 54; Ex. 1004 ¶ 1. Dr. Cooklev’s opinion is also supported by paragraph 3 of Suzuki, which explains that a conventional digital predistorter uses a lookup table “for linearizing non-linear characteristics of an amplifier.” Ex. 1004 ¶ 3; Ex. 2013 ¶ 54. Dr. Cooklev further supports his opinion by relying on Suzuki’s disclosure in paragraph 46 that power amplifier 28 is “subject to distortion compensation” by the predistorter, and that distortion components in the signal output by the amplifier are canceled by “distortion compensation data [that] are read out from the lookup tables 17-1 and 17-2 and provided to the adders 13-1 and 13-2, respectively.” Ex. 1004 ¶ 46; Ex. 2013 ¶ 54. And, Dr. Cooklev’s opinion is supported by Suzuki’s disclosure in paragraph 47 that the distortion compensation added by adders 13-1 and 13-2 add the distortion compensation data from lookup tables 17-1 and 17-2 “to perform distortion compensation (addition of predistortion)” to “signals to be transmitted.” Ex. 1004 ¶ 47; Ex. 2013 ¶ 54. Petitioner agrees that the distortion compensation data from lookup tables 17-1 and 17-2 “are added to the respective frequency band from” input signal ST “in order to predistort the output signal, which is then transmitted,” and does not dispute that the distortion compensation data from lookup tables 17-1 and 17-2 is ultimately cancelled out by the distortion created by amplifier 28. Pet. Reply 8. In light of the above evidence, we agree with Patent Owner that Suzuki’s distortion components from lookup tables 17-1 and 17-2 in Figure 6 (which Petitioner relies on for the first and second digital signals in limitations 10a and 10b) are cancelled out by the distortion created by power amplifier 28 before the signal is ultimately transmitted. We agree with Petitioner that these first and second digital signals include data in the form of distortion compensation data. However, because these signals are cancelled by the distortion from amplifier 28 before transmission, the data from these signals is never transmitted. Thus, the first and second digital signals identified by Petitioner (the distortion compensation data from lookup tables 17-1 and 17-2) do not comprise data “to be transmitted,” as limitations 10a and 10b require.” slip op. at 35
Patent outcomesUS 7,924,802 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,924,802 - Google LLC v. DH International Ltd.All claims unpatentablePTAB · Feb 10, 2026 · IPR2024-01322 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–20 are unpatentable as obvious over Mooney; the Board also found Mooney combined with Lee renders the disputed limitations obvious.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“A person of ordinary skill in the art (“POSITA”) at the time of the alleged invention of the ’294 patent would have had at least a bachelor’s degree in electrical engineering, or a related field, and at least two years of experience in design, development, and/or testing of network-enabled consumer devices, and familiarity with payment cards, or the equivalent, with additional education substituting for experience and vice versa. Pet. 2 (citing Lipoff Decl. Ex. 1003 ¶ 57). “Patent Owner agrees with the Petitioner on the level of ordinary skill in the art.” Resp. 4. Patent Owner adds that a POSITA would have had “at least three years of relevant industry or research experience in wireless communication between devices.” Id. (citing Ex. 2001 ¶¶ 26–29). Mr. Zaheer testifies that a POSITA “would” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“The claim language and specification define and describe an “activation cue” in functional terms: a data communication from an external source is received by the cell phone and recognized as an activation cue if it causes the switching element to be assigned its first (activated) state. Ex. 1001, 9:28–31, 9:42–46, 10:14–16, 13:55–60, 14:53–59, 15:4–6, 19:20–26. Patent Owner agrees that “upon an activation cue being received by portable electronic device 10, switching element 44b switches to its activated state.” Resp. 19 (quoting Ex. 1001, 10:14–16). The activation cue may be a predetermined bit sequence, a predetermined contactless data transmission, continuously emitted, pulsed, or punctual, but these are unclaimed non-limiting embodiments of the preferred form of data transmission. Id. at 9:25–26 (“for example a predetermined bit sequence”), 11:20–22 (“One example . . . emit an activation cue in the form of a predetermined contactless data transmission”), 14:65–15:3 (continuously emitted, pulsed or punctual cue). We will not read such preferred embodiments from the specification into claim language that is not so limited. See SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (care should be taken “not to import into a claim limitations that are not part of the claim”); see also In re Van Geuns, 988 F.2d 1181, 1184 (Fed. Cir. 1993) (“limitations are not to be read into the claims from the specification”); see also IQRIS Techns. LLC v. Point Blank Enterprises, Inc., 2025 WL 727717, *4 (Fed. Cir. 2025) (“It is the claims, not the preferred embodiments, that” slip op. at 15
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) does not applyDecided for petitioner
“operatively linked to said electronic circuit” under 35 U.S.C. Section 112, sixth paragraph or not, the result is the same. We note there is no presumption of applying means-plus-function analysis to the switching element, because the limitation does not use the words “means for” that would mandate such claim construction treatment, and “switching” may invoke structure as well as function. See Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1349–1350 (Fed. Cir. 2015) (en banc) (holding that “use of the word ‘means’ creates a presumption that § 112, ¶ 6 applies”). Regardless, we look to the meaning of the claim phrase at issue in view of the specification. We determine that the ’294 patent provides a clear, concise meaning for the switching element upon which both parties rely for construction. Patent Owner’s express agreement with Petitioner, that the claimed switching element is described in the ’294 patent as “any type of device allowing data to be conveyed according to alternate data conveyance operations in response to an activation cue being received by transceiver 18 or not,’” is particularly telling because it is not consistent with Patent Owner’s argument that the switching element means “switching of the data.” Resp. 7, 31 (citing Ex. 1001, 9:28–318). The claim language does not recite, and the specification does not describe, the switching element as a device that switches the data. Therefore, we determine the claimed “data conveyance switching element” means any type of switching device that allows data to be 8 We presume Patent Owner’s citation to “Exh. 2001, 9:28-31” on page 7 was intended to be a citation to the ’294 patent (Ex. 1001), as cited on page 31. whether or not an “activation cue” is received by the cell phone “cue receiver.”” slip op. at 21
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningDecided for petitioner
“[external] data exchange device” as a device with a data transceiver coupled to a circuit that carries out the function of exchanging data. Pet. 7–8 (citing Ex. 1001, 2:14–17, 4:7–14, 9:3–6; Ex. 1003 ¶¶ 67–68). As above, whether we construe the “[external] data exchange device” under 35 U.S.C. Section 112, sixth paragraph or not, the result is the same. Patent Owner, quoting the description of a data exchange device in the ’294 patent, contends that a “[external] data exchange device” “can be any sort of data exchange device comprising an electronic circuit (not shown) therein and a data transceiver 9a.” Resp. 8 (quoting Ex. 1001, 9:4–6). Patent Owner also responds to the Petition by clarifying that “[a]n external data exchange device is not a transceiver but a device with a transceiver.” Id. (citing Ex. 2001 ¶ 48). Petitioner argues in reply that Patent Owner does not contest Petitioner’s mappings of Mooney’s “cordless telephone base unit” or “cellular network infrastructure” to the claimed data exchange devices, such that no construction is necessary to resolve the dispute. Reply 5 (citing Resp. 16–37; Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011)). Limitations [1.c] and [1.d] recite “a first [second] data transceiver operatively linked to said electronic circuit [in the cell phone],” both of which are defined functionally as “for exchanging data between said electronic circuit [in the cell phone] and a first [second] external data exchange device over a first [second] communication link.” Nothing in the the other independent claims, further limits the form or function of the “[external] data exchange device,” although a device external to the cell phone may invoke additional structure. We determine the plain meaning of “[external] data exchange device” as claimed and described in the ’294 patent governs: any [external] device that comprises an electronic circuit and data transceiver for exchanging data with the electronic circuit in the cell phone over a communication link. slip op. at 22
Patent outcomesUS 9,022,294 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,022,294
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.