- Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Aug 18, 2026 · IPR2025-00339 · APJ Kristen L Droesch · IPR · Final written decision
Claims 22, 23, 28, and 30 are unpatentable over Choi, Labaziewicz, and Yu; claims 1–3, 10–12, 24, 25, 32, and 33 were not shown unpatentable.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningOther
“We decline Patent Owner’s invitation to construe “during a frame” of “independently controlling simultaneous data acquisition with each of the first and second channels during a frame” by importing the extraneous limitations “at some point between the beginning and the end of the exposure interval during which the image sensors capture a single image.” As pointed out by Petitioner, Patent Owner’s proposed construction is unsupported by the language of claim 22 and the ’180 Specification because Specification does not disclose an exposure interval nor suggest “during a frame” is limited to an exposure interval. Patent Owner and its expert Dr. Saber cite only extrinsic evidence (Exs. 2006, 2009) to support its argument that claim 22 should be limited to an “exposure interval during which the image sensors capture a single image.” See PO Resp. 16–17; Ex. 2020 ¶ 64. Similarly, Patent Owner relies only on extrinsic evidence (e.g., Ex. 2011, 1; Ex. 2022, 1; Ex. 2020 ¶ 66) to limit “during” to “at some point between the beginning and the end.” See id. at 18. When considered in the context of claim 22 and the ’180 Patent Specification which do not limit “during a frame” to an exposure interval, we find that we cannot rely on Patent Owner’s citations to extrinsic evidence to yield a reliable construction for “during a frame.” As demonstrated in the analysis below, we need not provide an explicit construction for “during a frame” to resolve the parties’ disputes regarding the merits of the patentability challenges. See Realtime, 912 F.3d at 1375. We apply the ordinary and customary meaning for “during a frame.” To the extent that an explicit identification of the ordinary and customary meaning may aid the understanding of our analysis, consistent with the language of claim 22 and the ’180 Patent Specification, we find that the ordinary and customary meaning for “during a frame” is “during the period of time that data for an image frame is acquired.” See Ex. 1001, code (57), 20:6–24, 25:23–35.” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2-3 years of experience in digital imaging systems,” and that “[l]ess experience may be necessary with additional education, and likewise, less education may be necessary with additional work experience.” Pet. 6 (citing Ex. 1003 ¶¶ 16–19). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’180 Patent Specification and the prior art of record.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Owner to show that Labaziewicz is not prior art because the ’180 Patent is entitled to the earliest August 25, 2004, filing date of the ’854 Provisional Application. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). Patent Owner’s arguments fail to meet this burden of production because, aside from addressing deficiencies of written description support the ’854 Provisional Application provides written description support for all of the limitations of the claimed invention. See PO Resp. 60–64; PO Sur-reply 25–28. Specifically, Patent Owner does not address written description support in the ’854 Provisional Application for “independently controlling simultaneous data acquisition with each of the first and second channels during a frame”––limitation [22.3]––the heart of the parties’ claim construction disputes addressed above in Section II.A. See PO Resp. 60–64; PO Sur-reply 25–27. Accordingly, Patent Owner has not met its burden of production in coming forward with evidence or argument to show possession of the claimed invention in the ’854 Provisional Application. As a result, the burden of production does not shift back to Petitioner, and, therefore, the ’180 Patent is not entitled to the benefit of the August 25, 2004, filing date of the ’854 Provisional Application.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Petitioner does not present arguments that it would have been obvious to a person of ordinary skill in the art at the time of the invention to modify the teachings of Matsushima to acquire data for images 62A and 62B at the argues that Matsushima renders obvious this limitation. See id. at 21, 23, 30; PO Resp. 33–34 (“[T]he Petition provides no further explanation why Matsushima renders this limitation obvious.”). In the Reply for the first time, Petitioner asserts that “a POSITA would understand that Matsushima’s disclosure, including its multi-channel architecture, synchronous control of channels, and capturing two images that are scaled versions of the same scene, renders obvious simultaneous acquisition during a frame. Pet. Reply 13 (citing Ex. 1069 ¶ 49). We do not consider Petitioner’s belated argument because it exceeds the proper scope of a reply. A reply may only respond to arguments raised in the corresponding patent owner response. See 37 C.F.R. § 42.23. As explained in the Trial Practice Guide, “respond” “does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Trial Practice Guide at II.I. (December 2025)(citing 37 C.F.R. § 42.23).10 A reply that raises a new issue or belatedly presents evidence may not be considered. See id. For example, a “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Id.” slip op. at 32
Patent outcomesUS 7,916,180 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,916,180 - Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Jul 21, 2026 · IPR2025-00339 · APJ Kristen L Droesch · IPR · Final written decision
Claims 22, 23, 28, 30, and 33 are unpatentable over Choi, Labaziewicz, and Yu under § 103; claims 1–3, 10–12, 24, 25, and 32 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2-3 years of experience in digital imaging systems,” and that “[l]ess experience may be necessary with additional education, and likewise, less education may be necessary with additional work experience.” Pet. 6 (citing Ex. 1003 ¶¶ 16–19). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’180 Patent Specification and the prior art of record.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Owner to show that Labaziewicz is not prior art because the ’180 Patent is entitled to the earliest August 25, 2004, filing date of the ’854 Provisional Application. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”).” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“We do not agree with Petitioner’s arguments based on retrieval of data from CCD 18A and CCD 18B. Although Matsushima’s CCD drive circuits 20A and 20B are driven synchronously by timing generator 28 (see Ex. 1007 ¶ 27), Matsushima discloses that “accumulated signal charges are retrieved by CCD drive pulses applied by CCD drive circuits 20A and 20B, and are sequentially output from CCD 18A and CCD 18B as voltage signals (analog image signals) corresponding to each signal charge” (see Ex. 1007 ¶ 23) (emphasis added). In other words, regardless of whether CCD drive circuits 20A and 20B are driven synchronously by timing generator 28, Matsushima discloses that voltage signals corresponding to the accumulated 8 Petitioner’s citation erroneously includes ¶¶ 34–36 of Exhibit 1069. CCD 18A and CCD 18B sequentially––not output at the same time or simultaneously.” slip op. at 30
- Strike new argumentNew argument disregardedDecided for patent owner
“argues that Matsushima renders obvious this limitation. See id. at 21, 23, 30; PO Resp. 33–34 (“[T]he Petition provides no further explanation why Matsushima renders this limitation obvious.”). In the Reply for the first time, Petitioner asserts that “a POSITA would understand that Matsushima’s disclosure, including its multi-channel architecture, synchronous control of channels, and capturing two images that are scaled versions of the same scene, renders obvious simultaneous acquisition during a frame. Pet. Reply 13 (citing Ex. 1069 ¶ 49). We do not consider Petitioner’s belated argument because it exceeds the proper scope of a reply. A reply may only respond to arguments raised in the corresponding patent owner response. See 37 C.F.R. § 42.23. As explained in the Trial Practice Guide, “respond” “does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Trial Practice Guide at II.I. (December 2025)(citing 37 C.F.R. § 42.23).9 A reply that raises a new issue or belatedly presents evidence may not be considered. See id. For example, a “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Id. Petitioner clarifies that the Petition does not argue inherency. See Pet.” slip op. at 33
Patent outcomesUS 7,916,180 mixed§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,916,180 - Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentablePTAB · Jul 21, 2026 · IPR2025-00342 · APJ Scott A Daniels · IPR · Final written decision
Claims 1, 2, and 6–11 were not shown unpatentable because the cited combinations did not teach guiding a vehicle to a fixed destination or calculating the claimed optimized path from stored destination data.
RulingsFinal written decision- Adverse judgmentOther
“reserves consideration of discretionary issues to the Director. The relief Patent Owner requests is that the panel exercise discretion to terminate these proceedings based on actions taken in related district court proceedings as done in Hulu. Supp. PO Resp. 2. Because the basis for Patent Owner’s requested relief is discretionary, the panel lacks the authority to grant the request. In this regard, the present situation is different from that in Hulu and Sinclair Pharma Limited v. Hydrafacial LLC (IPR2025-00145, Paper 41, Squires, Feb. 12, 2026), cited by Patent Owner. In those cases, the 9 Available at: https://www.uspto.gov/sites/default/files/documents/Director_Institution_of _AIA_Trial_Proceedings.pdf (“Director Institution Memo”). Director ordered de-institution, not the panel. The Director has not made such a determination or delegated such authority to the panel in these proceedings. Indeed, as noted above, Patent Owner has already briefed, and the Director has previously ruled on, discretionary denial issues. Paper 10. Accordingly, we decline to vacate our Institution Decision and focus our analysis on the merits of the case as presented by the parties.” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We consider the asserted grounds of unpatentability in view of the understanding of a person of ordinary skill in the art. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “[O]ne or more factors may predominate.” Id. Petitioner asserts that ordinarily skilled artisans “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related subject, and four years of work experience in image processing, automated vehicle control/navigation, or a related field.” Pet. 7. Petitioner’s proposed definition, which Patent Owner does not dispute, appears reasonable and consistent with the asserted prior art and the ’805 patent, and we adopt it here. See generally, PO Resp. Based on this record, and because there is no dispute, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’805 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed patent owner constructionDecided for patent owner
“Here, in our opinion, Patent Owner has shown that the Specification describes the potential destinations of a vehicle as limited to physically fixed, non-transient objects or features. PO Resp. 18–21. As an initial matter the ’805 patent is titled “Docking Assistant” and explains its purpose for guiding a “vehicle to a stop at a specific location.” Ex. 1001, codes (53), (57), Abstract. We acknowledge that claim 1 does not expressly recite that “at least one potential destination” is a fixed destination or location. See id. at 7:61– 63 (Claim 1 requiring “extracting from the acquired image data positional parameters of at least one potential destination relative to the motor vehicle;”). Yet, in the context of the relatively brief specification, there is no explanation, example, or embodiment which reasonably extends the meaning of “destination” or “potential destination” beyond a fixed location. The ’805 patent describes in the Abstract that [m]any day-to-day driving situations require that an operator of a motor vehicle guide the motor vehicle along a specific course and bring the vehicle to a stop at a specific location, for example in a parking bay or at a loading platform. Id. at code (57) Abstract. The Abstract explains in the next sentence that “[t]o assist a vehicle operator in such situations, a method and a suitable device for implementing this method, include detecting the potential target objects in the image data of an image sensor and identifying the potential target objects as potential destinations in a multi-stage exclusionary method.” Id. (emphasis added). Nowhere in this initial description of the invention, nor anywhere else that Petitioner points to, is there is expansion of the “specific location” or “potential destination” beyond a docking station or parking bay. Of course, the claim is not limited to these examples, as it would be inappropriate to read in such limitations from the Specification. See Acceleration Bay, LLC v. Activision Blizzard Inc., 908 F.3d 765, 771 (Fed. Cir. 2018) (“Acceleration again attempts to import structural limitations into claims lacking those limitations. . . . While the specifications discuss a broadcast channel overlaying a network, the claims at issue are not so limited.”).” slip op. at 14
- Expert testimonyPatent owner expert creditedDecided for patent owner
“Patent Owner’s declarant, Dr. Majumder, testifies to the contrary that “[r]ead as an engineer, the ‘805 patent’s present invention is framed around guiding a vehicle to fixed, physical destinations (exemplified by docking stations and similar structures) without fiducials or special markings.” Ex. 2010 ¶ 81. Considering Broggi, Dr. Majumder testifies further that “[a] moving object, such as a preceding car, is not a valid destination under the ‘805 Patent, because it is not a stationary location at which the host vehicle can be guided to stop. To treat such a vehicle as a ‘potential destination’ would lead to collision, not guidance.” Id. ¶ 86. As discussed in our claim construction, given a plain reading of claim 1 in light of the Specification, our understanding of the ’805 patent is consistent with Dr. Majumder’s testimony. We agree that Broggi is directed expressly to the platooning of moving vehicles, and not physically fixed destinations as the proper claim construction requires. Because Broggi does not disclose the use of physically fixed “potential destinations” as required, e.g., in limitations [1.2]–[1.3], and neither Huttenlocher nor Brady are relied upon to overcome this deficiency, Petitioner has not met its burden of persuasion to show by a preponderance of the evidence that claim 1 would have been obvious over Broggi in view of Huttenlocher and Brady.” slip op. at 27
Patent outcomesUS 7,336,805 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · Markman · KSR · GrahamPatents in suitUS 7,336,805 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Tesla, Inc. v. Intellectual Ventures II LLCAll claims unpatentablePTAB · Jul 6, 2026 · IPR2025-00221 · APJ Scott A Daniels · IPR · Final written decision
Claims 1–8 are unpatentable as obvious: claims 1, 2, 5, and 6 over Dateki; claims 3 and 7 over Dateki and Mate; and claims 4 and 8 over Dateki and Chitrapu.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“[w]ould have been someone knowledgeable and familiar with the wireless communications systems that are pertinent to the ’889 patent. That person would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems. Pet. 18–19 (citing Ex. 1003 ¶ 25). Patent Owner does not dispute Petitioner’s contention as to the level of ordinary skill in the art. See generally, PO Resp. Based on this record, and because there is no dispute, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’889 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“do not recite, as Patent Owner interprets it, that the extracted power control information upon which the UE bases its transmission of a signal be “the same” power control information extracted from the control message. PO Resp. 25. Where the claim is clear on its face, we decline to inject “the same” into the construction, that is, words that are not actually in the claim. Yet considering the plain language of claim 1, we mostly agree with Patent Owner’s interpretation, namely that “a transmission power level based on the extracted power control information,” as required in limitation [1.6] includes power control information extracted from “the control message,” in limitation [1.5] having “power control bits for a plurality of UEs” as recited in limitation [1.4]. Ex. 1001, 10:2–19. We understand and interpret the concluding limitation in method-type claim 5 in the same manner as limitation [1.6].” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“do not recite, as Patent Owner interprets it, that the extracted power control information upon which the UE bases its transmission of a signal be “the same” power control information extracted from the control message. PO Resp. 25. Where the claim is clear on its face, we decline to inject “the same” into the construction, that is, words that are not actually in the claim. Yet considering the plain language of claim 1, we mostly agree with Patent Owner’s interpretation, namely that “a transmission power level based on the extracted power control information,” as required in limitation [1.6] includes power control information extracted from “the control message,” in limitation [1.5] having “power control bits for a plurality of UEs” as recited in limitation [1.4]. Ex. 1001, 10:2–19. We understand and interpret the concluding limitation in method-type claim 5 in the same manner as limitation [1.6].” slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“where packet transmission is conducted, “the transmission power control information is transmitted via the HS-SCCH as second transmission power control information TPCC at a shorter periodic cycle.” PO Resp. 11 (quoting Ex. 1005, 13:11–13). But in context, after describing transmission of TPCC 1 on F-DPCH, Dateki says “[a]lso, in a case where packet transmission is conducted, the transmission power control information is transmitted via the HS-SCCH as second transmission power control information TPCC at a shorter periodic cycle.” Ex. 1005, 13:8–13 (emphasis added). We find it significant that the word “also” is used by Dateki, here, to describe the relationship of TPCC 1 and TPCC 2 as used together. If the intent was to transmit and use only TPCC 2 on HS-SCCH when data packets are transmitted on HS-PDCH, it would have made more sense to say “alternatively,” and otherwise make clear that only TPCC 2 is transmitted. But they did not. On the other hand, the inventors certainly understood how to explain when TPCC 2 is not transmitted. For example, Dateki makes clear that in certain embodiments TPCC 2 is unnecessary and “transmission power control may be effectively realized without including transmission power control information in the HS-SCCH.” Id. at 14:33–35. The same cannot be said for TPCC 1.” slip op. at 30
Patent outcomesUS 11,664,889 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,664,889 - Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Jul 1, 2026 · IPR2025-00222 · APJ Frederick C Laney · IPR · Final written decision
Claims 1, 2, 4, 5, 8–11, 13, and 14 are unpatentable over Yu and Miyazaki; claims 15, 16, and 19 were not shown unpatentable over Matsushima.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “at, and before, the earliest claimed priority date of the ’158 patent . . . would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2–3 years of experience in digital imaging systems,” adding that “[l]ess experience may be sufficient with additional education, and likewise, less education may be sufficient with additional work experience.” Pet. 6–7 (citing Ex. 1003 ¶¶ 16–18). Patent Owner does not offer a competing definition or dispute Petitioner's articulation. Based on the entire record, we adopt Petitioner’s characterization of the level of skill for one of ordinary skill in the art because that characterization, we find, is consistent with the ’158 patent and the asserted prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“We determine that the claims require a per-channel determination of integration time—that is, an integration time arrived at for each sensor or channel individually—and cannot be satisfied by a single global value merely applied uniformly across the sensors. We do not, however, read the independent claims to require that the per-channel integration times differ from one another.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner
“We adopt the definition clearly and unambiguously set forth in the specification, which was likewise adopted by the Court in the related litigation. See Pet. 7–8, 55; Pet. Reply 1–2 (district court construing the term to mean “the time the image sensor collects and integrates signal from the scene”). The specification states that the integrated photo-charge “is directly related to the time the image sensor collects and integrates signal from the scene,” and that “[t]his is known as integration time.” Ex. 1001, 4:4–7. Accordingly, the ’158 patent demonstrates that the inventors indisputably acted as a lexicographer for the term “integration time.”” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“We construe “during a frame” to mean the period during which data for a single frame of an image is captured. The limitation is satisfied where the per-channel integration time is effectuated during the frame; it does not require that the integration time be re-determined mid-frame, nor does it require actuation of a “charge integration switch.” The specification’s only use of the phrase confirms this reading: “each camera channel is controlled during a frame under an independent integration time.” Ex. 1001, 3:45–50. Consistent with that usage, the specification describes selecting an integration time for each channel and then integrating the photo-signal “within a single frame of data,” and describes placing the charge-integration switch in a state to allow charge to accumulate for the selected period and then transferring the accumulated charge upon completion of the integration period. Id. at 4:51–54, 11:3–18. We decline Patent Owner’s proposal to require in-frame actuation of a charge-integration switch, for the same reason we decline to import that structure into “integration time.” We also decline to read the phrase to require mid-frame re-determination of the integration time, because the patent’s own embodiment selects an integration time and then integrates charge during the frame under that selected time. Ex. 1001, 4:51–54, 11:3– 18. So construed, “during a frame” is not redundant of the independentclaim limitation: it adds that the per-channel control occurs within a single frame (intrascene), as distinct from adjustment from one frame to the next (interscene).” slip op. at 15
Patent outcomesUS 9,232,158 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,232,158 - Assa Abloy AB / Assa Abloy Inc. et al. v. CPC Patent Technologies Pty, LtdNo claims unpatentablePTAB · May 27, 2026 · IPR2022-01093 · APJ Scott A Daniels · IPR · Remand
Claims 13 and 14 were not shown unpatentable because the evidence did not establish that the received card information defines the memory location for the biometric signature.
RulingsRemand decision- RemandOther
“On appeal, the U.S. Court of Appeals for the Federal Circuit reversed our Original Decision and remanded the case for further proceedings. CPC Pat. Techs. Pty Ltd. v. ASSA Abloy AB, No. 2024-1492, 2025 WL 3134960, at *1 (Fed. Cir. Nov. 10, 2025), Paper 43. The Federal Circuit also noted that in light of the affirmance of our decision in another proceeding, IPR2022- 00600, challenging the same patent, the “errors the Board made in this appeal only extends to claims 3–18, which were not at issue in the other appeal.” Id. at *3 n 1. Therefore, in this proceeding, only challenged claims 13 and 14 remain. At the request of the parties, we permitted additional briefing addressing the issues on remand from the Federal Circuit. Paper 44. Petitioner filed an opening brief (Paper 51 (“Pet. Remand Br.”)), and Patent Owner filed an opening brief (Paper 52 (“PO Remand Br.”)). Both parties also filed responsive briefs. Paper 54 (“Pet. Responsive Br.”); Paper 55 (“PO Responsive Br.”). This is a Final Written Decision on Remand addressing the patentability of the remaining challenged claims 13 and 14. To prevail, Petitioner must prove unpatentability by a preponderance of the evidence. See 35 U.S.C. § 316(e); 37 C.F.R. § 42.1(d). This Final Written Decision on Remand is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73.” slip op. at 3
- BurdenNot shown unpatentable
“offers nothing to suggest that its card information ‘tells you’ where to store the fingerprint data.” ASSA ABLOY AB, 2025 WL 3134960 at *3. Reversing our determinations as to Hsu, the Court found that the testimony of Petitioner’s declarant, Mr. Lipoff, “merely confirms the associative link between the card information and the biometric data. Still missing is any non-conclusory testimony that Hsu’s card information determines the memory location of the biometric data.” Id. at 8. Therefore, on remand, a central question is whether Petitioner has shown sufficiently that Tsukamura cures this deficiency. Petitioner has not done so. In the Petition, Petitioner relies on Tsukamura for teaching a specific location for storing fingerprint data. See Pet. 75 (stating that “Tsukamura’s index number specifies the physical memory location in the memory”). Petitioner argues that “[t]hus, Tsukamura discloses defining, dependent upon the “index number N index,” a memory location for storing a biometric signature (e.g., a fingerprint template), i.e., ‘a memory location is specified by the card information.’” Id. at 75–76 (citing Ex. 1006 ¶ 215). In support, Petitioner’s declarant, Mr. Lipoff, testifies that “[i]f the Tsukamura implementation were used for Sanford-Hsu database, each user/account number would specify a different entry (index number) in the database.” Ex. 1006 ¶ 394. Tsukamura’s index number N index does not teach or suggest much more than Hsu’s using “an account number or employee number, to access a stored there during an enrollment procedure.” Compare Ex. 1004, code (57), with Ex. 1005, 4:7–11. That is, both references arguably teach defining, i.e., setting or establishing, a certain location in a database for biometric data. For example, as described above, Tsukamura’s fingerprint template Temp is stored in flash ROM 35 at a defined index number N index in the database. Id. 4:7–11, 50–54. However, neither Petitioner, nor Mr. Lipoff, persuasively explain how or why Tsukamura’s fingerprint template Temp, stored at index number N index, is commensurate with “means for defining, dependent upon the received card information, a memory location in a local memory external to the card” as recited in claim limitation 13[C]. Ex. 1001, 14:3–5 (emphasis added).” slip op. at 22
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Tsukamura’s index number N index does not teach or suggest much more than Hsu’s using “an account number or employee number, to access a stored there during an enrollment procedure.” Compare Ex. 1004, code (57), with Ex. 1005, 4:7–11. That is, both references arguably teach defining, i.e., setting or establishing, a certain location in a database for biometric data. For example, as described above, Tsukamura’s fingerprint template Temp is stored in flash ROM 35 at a defined index number N index in the database. Id. 4:7–11, 50–54. However, neither Petitioner, nor Mr. Lipoff, persuasively explain how or why Tsukamura’s fingerprint template Temp, stored at index number N index, is commensurate with “means for defining, dependent upon the received card information, a memory location in a local memory external to the card” as recited in claim limitation 13[C]. Ex. 1001, 14:3–5 (emphasis added).” slip op. at 22
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Tsukamura’s index number specifies the physical memory location in the memory. Thus, Tsukamura discloses defining, dependent upon the “index number N index,” a memory location for storing a biometric signature (e.g., a fingerprint template), i.e., the memory location is specified by the index number, under the Second Construction. In my opinion, if the Tsukamura implementation were used for Sanford-Hsu database, each user/account number would specify a different entry (index number) in the database. Ex. 1006 ¶ 394. This is consistent with our understanding of Tsukamura, and we can agree that Tsukamura teaches defining—that is, setting or establishing—a location for storing the biometric signature at “index number N index.” See Ex. 1005, 4:7–11. However, considering the Federal Circuit’s decision, we determine such an associative link does not sufficiently explain how one of ordinary skill in the art would have understood Tsukamura’s IC” slip op. at 23
Patent outcomesUS 8,620,039 not shown unpatentableClaim construction§ 103 obviousnessPatents in suitUS 8,620,039 - Assa Abloy AB / Assa Abloy Inc. et al. v. CPC Patent Technologies Pty, LtdNo claims unpatentablePTAB · May 8, 2026 · IPR2022-01094 · APJ Scott A Daniels · IPR · Remand
Claims 3–12 and 15–18 were not shown unpatentable because the asserted combinations did not establish that card information defined the memory location for storing the biometric signature.
RulingsRemand decision- BurdenNot shown unpatentable
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) as “requiring [inter partes review] petitions to identify ‘with particularity . . . the evidence that supports the grounds for the challenge to each claim’”); see also 37 C.F.R. § 42.104(b) (requiring a petition for inter partes review to identify how the challenged claim is to be construed and where each element of the claim is found in the prior art patents or printed publications relied upon). That burden never shifts to the patentee. Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). Furthermore, Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016).” slip op. at 10
- Skill levelOther
“B. Level of Ordinary Skill in the Art Consistent with our Original Decision, a person of ordinary skill in the art at the time of the ’039 Patent would have had at least a bachelor’s degree in computer engineering, computer science, electrical engineering, or a related field, with at least one year of experience in the field of human-machine interfaces and device access security. Additional education or experience might substitute for the above requirements.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“1. Limitation 3(da) The issues on remand revolve essentially around limitation 3(da): Limitation 3(da) – storing the inputted biometric signature in a memory at a memory location defined by the provided card information; Ex. 1001, 12:61–63. Considering limitation 3(da) in our Original Decision, we explained that during an enrollment process the claimed “biometric signature,” e.g., a fingerprint, is not yet stored in the memory, and no memory location or address has been “defined,” as in “set” or “established,” in the memory for storing the fingerprint, until card information is received. Once the card information and fingerprint are received during enrollment, the card information provides data that establishes where, i.e., at what memory location or address, the system will store the fingerprint data. Original Decision 16.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentable
“Tsukamura’s index number N index does not teach or suggest much more than Hsu’s using “an account number or employee number, to access a fingerprint database (44) and retrieve reference fingerprint data previously stored there during an enrollment procedure.” Compare Ex. 1004, code (57), with Ex. 1005, 4:7–11. That is, both references arguably teach defining, i.e., setting or establishing, a certain location in a database for biometric data. For example, as described above, Tsukamura’s fingerprint template Temp is Id. 4:7–11, 50–54. However, neither Petitioner, nor Mr. Lipoff, persuasively explain how or why Tsukamura’s fingerprint template Temp is set or established “at a memory location defined by the provided card information” as recited in claim limitation 3(da). Taking a close look at Petitioner’s testimonial evidence as to claim 3, we first note Mr. Lipoff testifies that Tsukamura’s index number specifies the physical memory location in the memory. Thus, Tsukamura discloses defining, dependent upon the “index number N index,” a memory location for storing a biometric signature (e.g., a fingerprint template), i.e., the memory location is specified by the index number, under the Second Construction. In my opinion, if the Tsukamura implementation were used for Sanford-Hsu database, each user/account number would specify a different entry (index number) in the database. Ex. 1006 ¶ 394. This is consistent with our understanding of Tsukamura, and we can agree that Tsukamura teaches defining—that is, setting or establishing—a location for storing the biometric signature at “index number N index.” See Ex. 1005, 4:7–11. But, concomitant with the Federal Circuit’s point, such an associative link does not sufficiently explain how one of ordinary skill in the art would have understood Tsukamura’s IC card information to define “as in ‘set’ or ‘establish[]’” a memory location, as our claim construction requires. See Section II.C.3.” slip op. at 22
Patent outcomesUS 8,620,039 not shown unpatentableClaim construction§ 103 obviousnessPatents in suitUS 8,620,039 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Expert testimonyPatent owner expert creditedDecided for patent owner
“gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.