- Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentablePTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision
Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15
- Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed
“nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15
Patent outcomesUS 11,581,322 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,581,322 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00189 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claim 19 is unpatentable as obvious over Kim and over Nam; the challenge based on Lee and Park fails for lack of a reasonable expectation of success.
RulingsFinal written decision- Adverse judgmentAdverse judgmentOther
“B. Patent Owner’s Disclaimer of Claims 17 and 20 As indicated above, Patent Owner filed a statutory disclaimer of claims 17 and 20 of the ’666 patent. See Ex. 2005. In view of Patent Owner’s statutory disclaimer, we treat claims 17 and 20 as having never been part of the ’666 patent. See Vectra Fitness, Inc. v. TNWK Corp., ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, we do not consider claims 17 and 20 to be within the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claim 19, the challenged claim that has not been disclaimed.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) 3D memory devices, or an equivalent level of skill, knowledge and experience (e.g., an advanced degree may substitute for professional experience).” Pet. 24–25 (citing Ex. 1003 ¶¶ 34–37). Petitioner further contends that the “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. at 25 (citing Ex. 1003 ¶¶ 34–37).” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“evidence from the complete record now before us, we determine that the claim term “curved side surface” encompasses any outer surface of the structure with curvature. See Hamilton Beach Brands, Inc. v. F’real Foods, LLC, 908 F.3d 1328, 1338–1339 (Fed. Cir. 2018) (finding that it is acceptable for the Board to adopt its own claim construction where the parties “had notice of the contested claim construction and an opportunity to be heard”). We do not adopt Patent Owner’s position that “curved side surface” requires the side surface to be curved along a direction perpendicular to the top surface of the structure (e.g., the z-axis).” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“curved side surface” are premised on its proposed claim construction which, as set forth above, we decline to adopt. Instead, we determined that “curved side surface” as used in the challenged claim encompasses any outer surface of the structure with curvature, which does not need to be curved in any specific direction. See § II.B.1, supra. Kim states: Embodiments of the inventive concepts in which the protrusion pad PAD_P has a rectangular parallel[] shape is illustrated, but the protrusion pad PAD_P is not limited thereto and, in some embodiments, may have a shape including a curved surface based on a virtual rectangular parallel[] shape, a cylindrical shape, or any shape. Ex. 1005, 8:29–34 (emphases added). Dr. Lee testifies that “[a] POSITA would have recognized that this includes configurations where the sides of the protrusion pads are curved, particularly to optimize electrical connectivity and mitigate stress at material interfaces.” Ex. 1003 ¶ 201. Dr. Lee further testifies that a POSITA would have understood Kim’s disclosure “teaches a variety of different protrusion pad PAD_P shapes” including “pads with curved sides when viewed in cross-section or pads with curved sides when viewed from above.” Id. ¶ 202. Accordingly, we determine that Kim discloses a cylindrically-shaped PAD_P that has a “curved side surface” as required by the challenged claim. slip op. at 24
Patent outcomesUS 11,145,666 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,145,666 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00118 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–14 were not shown unpatentable because the Petition did not establish the claimed adjacent pad groups, common ESD bus, or pad-to-pad bonding wires.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“would have had a bachelor of science degree in electrical engineering or similar discipline, and 2–3 years of professional experience working with (e.g., researching, analyzing, designing, or teaching) ICs, or equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience and vice versa). This POSITA would have been aware of and generally knowledgeable about IC design, layout, manufacturing, packaging, and ESD protection. Pet. 18 (citing Ex. 1003 ¶¶ 29–33). Patent Owner states that it “does not dispute Petitioner’s proposed level of a” POSITA “for purposes of this IPR.” PO Resp. 10. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’164 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record and the arguments raised by the parties, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 7
- Expert testimonyPatent owner expert creditedDecided for patent owner
“includes segmented ground rails 350, 355. . . . The package substrate 310 includes a package common ground rail 360, and the segmented SoC ground rails 350, 355 are independently connected to the package common ground rail 360 via separate connections 370, 375 respectively.”). As set forth above, Dr. Foty describes the three ground lines in Saint Figure 7-7 as “segmented rails” when discussing the combination of Saint and Haralabidis, thus equating the three ground lines in Saint Figure 7-7 with Haralabidis’ segmented ground rail. Ex. 1003 ¶ 368. Neither Petitioner nor Dr. Foty, however, adequately addresses how or why a POSITA would have understood that the three separate grounds lines in Saint Figure 7-7 were “segmented rails” like the segments of the single ground line described in Haralabidis. In contrast, Dr. Khatri credibly testifies: Haralabidis teaches the use of a “common ground rail” to connect “segmented ground rails.” Haralabidis, 3:9–22, 3:34– 40, 3:65–4:12. A POSITA would understand “segmented ground rails” to refer to a single ground signal that has been “segmented.” That is fundamentally different from the design of Saint’s Figure 7-7 that Dr. Foty relies on, which uses three different ground signals, GND1, GND2, and GND3—not a single ground signal that has been “segmented.” Because of that, a POSITA would not have been motivated to change the Figure 7-7 design completely to connect three separate signals (GND1, GND2, and GND3) together as Dr. Foty proposes. Ex. 1003 ¶ 368. Indeed, for these reasons, a POSITA would have understood Haralabidis’ teachings of a “common ground rail” are inapplicable to Saint’s Figure 7-7. Ex. 2010 ¶ 129. Petitioner’s arguments and Dr. Foty’s testimony with respect to the modification of Saint Figure 7-7 leave an analytical gap that does not apprise us of why a POSITA would have modified Saint Figure 7-7 to include a common ESD bus as described in Haralabidis.” slip op. at 37
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“For these reasons, we find that Yoshinaga’s statement that “[r]eference potential pads are not shown to simplify the drawing” indicates that reference potential pads are not depicted in Yoshinaga Figure 6, and determine that Yoshinaga Figure 6 does not disclose “a plurality of pad groups, adjacent and connected to the plurality of ESD buses” as recited in claim 6. Petitioner also argues that a POSITA would have understood that power supply pads 3, 4, and 58 in Yoshinaga “could just as readily be used as reference pads” and it would have been obvious “to use the pads immediately next to the saved areas as reference pads (e.g., pads 5 and 6) as pad assignments were left to the designer’s discretion.” Pet. 31 (citing Ex. 1003 ¶¶ 137–139). Petitioner asserts that “selecting which pads to use for ground, power signals, etc. is a design choice that depends on factors like chip size, the number of I/O signals, and the number of pads available.” Pet. 31 (citing Ex. 1003 ¶ 137–139). Petitioner states that such discretion would be to preserve Yoshinaga’s saved area for other circuitry as taught by Saint. Pet. 31–32 (citing Ex. 1003 ¶¶ 137–139; Pet. 19–23 (§ IX.A)). Neither Petitioner nor Dr. Foty adequately explain, however, why a POSITA would have made this specific design choice, namely, replacing power supply pads 3, 4, and 58 with reference pads. Pet. 31; Ex. 1003 ¶¶ 137–139; see also Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1069 n.4 (Fed. Cir. 2018) (“Merely stating that a particular placement of an element is a design choice does not make it obvious.” (quoting Cutsforth, Inc. v. MotivePower, Inc., 636 Fed. Appx. 575, 578 (Fed. Cir. 2016))). Petitioner offers the general proposition that pad assignments are left to the designer’s discretion, but this does not provide a reason why a POSITA would have been motivated to modify Yoshinaga Figure 6 as proposed. Pet. 31; Ex. 1003 ¶¶ 137–139. We have determined that Yoshinaga does not show (rather than does not label) reference pads. Because all of Yoshinaga’s illustrated pads are power supply pads, Petitioner’s proposed reassignment of pads would not be a simple matter of rearrangement of an existing mixture of power supply and reference pads, but require that reference pads be imported from elsewhere, and power supply pads be moved to some unspecified location. Petitioner’s arguments and Dr. Foty’s testimony with respect to the modification of Yoshinaga Figure 6 leave an analytical gap that does not apprise us of why a POSITA would have modified Yoshinaga Figure 6 to include reference pads in the place of power supply pads 3, 4, and 58. We agree with Patent Owner that none of Petitioner’s rationales” slip op. at 20
Patent outcomesUS 10,879,164 not shown unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,879,164 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentablePTAB · Jun 1, 2026 · IPR2025-00117 · APJ Michael T Cygan · IPR · Final written decision
Claims 1–19 are unpatentable: claims 1–9, 11–16, 18, and 19 as obvious over Kim; claims 10 and 17 as obvious over Kim and Fang, Park, and Park and Fang.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶ 42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not dispute Petitioner’s definition. PO Resp. 7. We adopt Petitioner’s proposed 4 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 103; PO Resp. the ’711 patent and the prior art of record.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“Based on the record before us, we agree with Petitioner that “on a surface” should be interpreted in line with the definition of “on” set forth in the ’711 patent. Ex. 1001, 4:1–6. We particularly note that the ’711 patent states that “‘on’ . . . should be interpreted in the broadest manner” and that “on” is not limited to “directly on.” Id. Instead, the ’711 patent states that “‘on’ also includes the meaning of ‘on’ something with an intermediate feature or layer therebetween.” Id. Patent Owner agrees that this definition controls the “standalone ‘on’” term such that A may be on B even if there is an intervening layer between them. Tr. 55:8–11 (“The standalone ‘on,’ we agree in the context of the patent, you can have intervening layers. I think the patent is clear about that.”). Claim 14 recites that the etch-stop layer is “on” something; i.e., “on a side surface and a top surface of each step.” Ex. 1001, 16:20–22. Patent Owner agrees that a surface is a “something.” Tr. 56:5–8 (“surface obviously is a something”). Substituting the “a “‘on’ something with an intermediate feature or layer therebetween” results in claim 14 reading as, “on a surface with an intermediate feature or layer therebetween.” Unlike “directly on,” which specifies the relation between two things, “a surface” may merely indicate the thing that something is “on,” particularly when “on” is “interpreted in the broadest manner” as expressly required by the ’711 patent.” slip op. at 7
- Expert testimonyPatent owner expert discountedDecided for petitioner
“Although Dr. Campbell testified in his deposition in response to Petitioner’s counsel that “on the surface” requires direct contact with the surface, his interpretation was based on “embodiments of” the patent rather than a general understanding of a person skilled in the art confronted with that term. Ex. 1027, 122:6–25, 124:6–23 (“I’m not sure if there are other sources for that, but it was on the ’711, so I’ve taken it there.”). Dr. Campbell, upon questioning from Patent Owner’s counsel, later stated that “an expert in semiconductor fabrication” would understand “on the surface” to mean “contact between one layer and another . . . with nothing in between.” Id. at 146:25–147:6. However, Dr. Campbell did not explain why such an interpretation is particular to the semiconductor fabrication art, or provide other explanation or support for this statement, which is in tension with the definition of “on” in the ’711 patent. Accordingly, we significantly discount the weight accorded to that statement. Phillips, 415 F.3d at 1318 (stating, “conclusory, unsupported assertions by experts as to the definition of a claim term are not useful to a court. Similarly, a court should discount any expert testimony ‘that is clearly at odds with the claim construction mandated by the claims themselves, the written description, and patent.’”). On balance, Dr. Campbell’s testimony is best understood as a description of certain Figures of the ’711 patent rather than a representation of an ordinarily skilled person’s understanding of the term “on the surface.” See Ex. 2009 ¶ 47 (describing Figs. 1, 3, and 4 as depicting layers in contact with the underlying layer or substrate). For example, Dr. Campbell describes Figure 9A as having a barrier layer “on and directly contacting the top and side surfaces of each step.” Id. ¶ 28 (emphasis added) (citing inter alia Ex. 1001, 7:6–67). Dr. Campbell does not explain why, beyond the fact that many Figures show layers as adjacent and in contact, a person of ordinary skill in the relevant art would understand those Figures to limit the claim language rather than illustrating particular embodiments that fall within a broader scope of claims 14 and 15. See Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specifications into the claims.”).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We agree with Petitioner that Kim’s first and second section are described as compatible, not mutually exclusive, embodiments. Kim’s second section builds further layers upon the structure of its first section, and states: In these embodiments, the same elements as in the embodiments previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B will be denoted by the same reference numbers therein, and for concise description, overlapping description of elements previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B may be omitted. Ex. 1005 ¶ 184 (emphasis added). Patent Owner argues that only the embodiments in Figures 17A–22B describe an etch-stop layer and a barrier layer (as claimed), and that the language cited for a gate-stack-on-top configuration (e.g., Ex. 1005 ¶¶ 90, 91, and 240) is “conspicuously absent from the description of Figures 17A–22B.” PO Resp. 20 (citing Ex. 2009 ¶ 36). However, Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4 through 15 embodiments. While Figures 17A–22B show a gate-stack-on-bottom configuration, this merely continues the gate-stack-on-bottom illustrations that were used in all of the previous Figures, even for those in which it is undisputed that a gate-stack-on-top configuration is a described alternative. The Figures exemplify rather than limit the description of the gate-stack-on-bottom view in Figures 4–15 and do not exclude the gate-stack on bottom description of the embodiments exemplified by those figures.” slip op. at 17
Patent outcomesUS 10,672,711 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,672,711 - Reolink Innovation Inc. / Shenzhen Reolink Technology Co., Ltd. v. Throughtek Co. Ltd.Adverse judgmentPTAB · May 19, 2026 · IPR2025-01327 · APJ Sheila F Mcshane · IPR · Adverse judgment
The Board entered adverse judgment against Throughtek on claims 1–19 after finding it abandoned the contest by failing to file mandatory notices or respond to the show-cause order.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“The Order to Show Cause explained that under 37 C.F.R. § 42.73(b), “[a]ctions construed to be a request for adverse judgment include . . . [a]bandonment of the contest.” Paper 8, 3. The Order to Show Cause also explained that failure to participate in a proceeding, such as failure to file mandatory notices as required under 37 C.F.R. § 42.8, may be considered abandonment of the contest and result in adverse judgment against Patent Owner under 37 C.F.R. § 42.73(b). Id. (citing Cellpak, Inc. v. Mambate USA Inc., IPR2021-00007, Paper 4 at 2 (PTAB Mar. 23, 2021)). The Order to Show Cause gave Patent Owner ten calendar days to show cause why adverse judgment should not be entered against it. Id. Patent Owner did not respond to the Order to Show Cause. More than ten calendar days have elapsed since the date the Order to Show Cause was entered, and Patent Owner has not filed mandatory notices. In view of Patent Owner’s failure to file mandatory notices within the specified time period, we determine that Patent Owner has abandoned the contest. Pursuant to 37 C.F.R. § 42.73(b)(4), we construe Patent Owner’s abandonment of the contest as a request for adverse judgment. Under these circumstances, we determine that entry of judgment against Patent Owner is appropriate.” slip op. at 3
NonePatents in suitUS 9,727,655 - PTAB · May 13, 2026 · IPR2025-01444 · APJ George R Hoskins · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment after it disclaimed the entire patent term, entering judgment against claims 1–6.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). In addition, “[a]ctions construed to be a request for adverse judgment include: (1) Disclaimer of the involved application or patent; [and] (2) Cancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” Id. Because Patent Owner has explicitly requested adverse judgment against itself pursuant to Rule 42.73(b), and has disclaimed the entire term of the ’584 patent, Patent Owner’s request for adverse judgment is granted. ORDER In consideration of the foregoing, it is hereby: ORDERED that Patent Owner’s Request for Adverse Judgment is granted; and FURTHER ORDERED that adverse judgment is entered against Patent Owner with respect to claims 1–6 of the ’584 patent.” slip op. at 3
NonePatents in suitUS 7,547,584 - PTAB · May 13, 2026 · IPR2025-01082 · APJ David C Mckone · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment after it disclaimed the entire patent term, entering judgment against claims 1–10.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). In addition, “[a]ctions construed to be a request for adverse judgment include: (1) Disclaimer of the involved application or patent; [and] (2) Cancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” Id. Because Patent Owner has explicitly requested adverse judgment against itself pursuant to Rule 42.73(b), and has disclaimed the entire term of the ’181 patent, Patent Owner’s request for adverse judgment is granted.” slip op. at 3
NonePatents in suitUS 6,888,181 - Tableau Software, LLC v. Icharts LLCAll claims unpatentablePTAB · May 7, 2026 · IPR2024-01387 · APJ Iftikhar Ahmed · IPR · Final written decision
Claims 1–16 are unpatentable under the instituted obviousness grounds, including Becerra, the QlikView Manuals, and combinations with other references.
RulingsFinal written decision- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“why it is trustworthy and how it archives dates by which the webpages were accessible, as this is an information resource on which librarians reasonably rely. See FED. R. EVID. 703. We agree with Petitioner that Dr. Hall-Ellis does have personal knowledge of the facts stated in the remaining testimony (e.g., what she actually downloaded from websites), and that FEDERAL RULE OF EVIDENCE 602 is inapplicable to her testimony offered as an expert. See Pet. Opp. 5–6 (citing Ex. 1030 ¶¶ 26, 29–32, 35, 37–39). We find her testimony to be relevant to the issues presented and specifically to whether the QlikView documents were publicly accessible. We also find no danger that the testimony would confuse the issues or mislead the Board or present unfair prejudice to Patent Owner. Accordingly, we deny Patent Owner’s Motion as to the remaining portion of Dr. Hall-Ellis’s declaration.” slip op. at 92
- Strike new argumentNew argument disregardedGranted
“FURTHER ORDERED that Petitioner’s Motion to Strike portions of Patent Owner’s Reply on its Motion to Exclude (Paper 32) is granted; and” slip op. at 102
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“1. Motivation to Combine Becerra and Couckuyt Petitioner argues that a person of ordinary skill in the art would have been motivated to combine the teachings of Becerra and Couckuyt because such a person would have recognized that Couckuyt discloses useful techniques of assigning data to Becerra’s charts, including assigning data to each axis. Pet. 34 (citing Ex. 1005 ¶¶ 19, 52, Fig. 5; Ex. 1003 ¶ 224). Petitioner contends that Couckuyt discloses associating data from a “spreadsheet document” with a chart, such as a “bar graph.” Id. at 35 (citing Ex. 1006, 6:1–37; Figs. 3a, 3c). below. Petitioner’s annotations to Figure 4 identify “Drop Zones” in red and “Data Fields” in Blue. Id. at 36. Petitioner contends Couckuyt discloses a “drag-and-drop user interface (DDUI) . . . associated with a data source, such as the two-dimensional data source 300,” and Figure 4 illustrates the DDUI permitting “value data fields and the characteristic data fields . . . to be dragged and dropped into drop zones.” Id. at 35–36 (citing Ex. 1006, 7:10–13). Petitioner contends that a “primary benefit of the charting DDUI is that the user can quickly change the data that is being presented in the chart,” and using Couckuyt’s techniques, a user can “quickly change the data” and see the desired effects. Id. at 36 (citing Ex. 1006, 1:18–19; Ex. 1003 ¶ 228). Petitioner contends that when Becerra’s control panel includes multiple charts, Couckuyt’s techniques would allow dragging-anddropping data from a data source to multiple charts, and would simplify the process of assigning data to multiple control panel components. Id. at 36–37 skill in the art would have also had a reasonable expectation of success combining Becerra with Couckuyt because the combination would amount to nothing more than incorporating Couckuyt’s well-known drag-and-drop techniques into Becerra’s system. Id. at 37 (citing Ex. 1003 ¶¶ 229–231). Patent Owner responds that Couckuyt focuses on selecting a data icon that corresponds to dragging and dropping data fields, not dragging and dropping data, while Becerra teaches that selecting various data ranges from the spreadsheet is desirable. PO Resp. 36–37 (citing Ex. 1004 7:48–52; Ex. 2001 ¶ 146). According to Patent Owner, a person of ordinary skill in the art would not have been motivated to merely select data fields that do not limit the selected data in any way. Id. Patent Owner further argues Becerra’s method of binding components to a spreadsheet range and extracting formulas from a spreadsheet teaches away from the multiple chart generation scheme of Couckuyt that uses drag and dropping of data fields. Id. at 37. According to Patent Owner, Couckuyt is directed to the need for a charting DDUI that can generate multiple charts at the same time and such a need does not exist in Becerra which in turn is focused on creating a control panel that is an interactive graphics simulation. Id. (citing Ex. 1004, 1:66–67, 2:5–8; Ex. 1005 ¶ 11; Ex. 2001 ¶ 148). Based on our review of the complete record, we determine that” slip op. at 31
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“2. Whether QlikView Manuals Qualify as Prior Art Petitioner argues that “the QlikView Manuals describe a well-known system and are printed publications available to the public at least by July 8, 2008.” Pet. 7–9. Petitioner offers ample evidence to demonstrate the QlikView Manuals were publicly accessible by July 8, 2008. See id. (citing Ex. 1008; Ex. 1009; Ex. 1014–1023; Ex. 1003 ¶ 129–140; Ex. 1030;11 Ex. 1068 ¶¶ 4–7; Ex. 1032; Ex. 1033). Petitioner contends in 2008, QlikView was a well-known software product sold by QlikTech International AB (“QlikTech”). Id. at 8 (citing Ex. 1003 ¶ 129; Ex. 1030 ¶ 23; Ex. 1068 ¶¶ 4–7). Petitioner asserts that QlikTech announced that QlikView version 8.50 was scheduled for release on June 30, 2008, and QlikTech’s website added the “QlikView 8.50” hyperlink by July 8, 2008. Id. (citing Ex. 1003 ¶¶ 129–131; Ex. 1022, 1; Ex. 1068 ¶ 7). Petitioner contends that, as of July 8, 2008, a person of ordinary skill in the art would have understood that they could view the QlikView Manuals in the installation package. Id. (citing Exs. 1014–1017; Ex. 1003 ¶¶ 131–132; Ex. 1068 ¶ 7). Petitioner further contends that the QlikView Manuals were also available on QlikTech’s website as of this 11 As discussed below (see infra § IV.A), we grant Patent Owner’s Motion to Exclude as to certain portions of Exhibit 1030 and do not give them any weight. However, we deny Patent Owner’s Motion as to the remaining portions of Dr. Hall-Ellis’s testimony as well as Ms. Lofton’s testimony and various other exhibits proffered by Petitioner to show public accessibility of the QlikView manuals as of July 8, 2008. QlikView 8.50 was published on July 8, 2008. Id. at 8–9 (citing Exs. 1008, 1009, 1017, 1059, 1060; Ex. 1030 ¶¶ 29, 37). In its Patent Owner Response, Patent Owner does not contest that the QlikView Manuals were published and publicly available by July 8, 2008. PO Resp. 50 n.2 (noting only that Patent Owner intends to move to exclude evidence Petitioner relies on to establish the publication date for QlikView Manuals); Tr. 45:3–19. We are persuaded that Petitioner has shown by a preponderance of the evidence that the QlikView Manuals were publicly available as of July 8, 2008.12” slip op. at 50
Patent outcomesUS 8,271,892 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,271,892 - Yealink (USA) Network Technology Co. Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentablePTAB · Apr 7, 2026 · IPR2024-01439 · APJ Frederick C Laney · IPR · Final written decision
Claims 1–11 and 13–21 are unpatentable under § 103 based on Ono and Corbett and Uchida and Grimshaw; the Board did not find Ichieda unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person having ordinary skill in the art would have had at least a Master’s Degree in Electrical Engineering with . . . five years of work experience in computer science and embedded systems, or Master’s Degree in Computer Science with . . . five years of work experience in electrical and computer engineering and embedded systems. Additional educational experience could substitute for some of the work experience. level of skill in the art.” PO Resp. 10. We adopt Petitioner’s proposed definition of a person of ordinary skill in the pertinent art, as it is consistent with the ’951 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“determine that none of the claim terms the parties provide constructions for require an express construction in this proceeding. See Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). The parties do appear to disagree on the meaning of “trigger,” however. Although neither party actually identifies that term as needing interpretation and neither party actually provides a claim construction analysis to support its respective position, the parties do dispute whether the evidence presented shows a “trigger,” both presumably giving that term its plain and customary meaning. In other words, while both parties appear to agree “trigger” carries its plain meaning, in application, the parties’ dispute regarding the particular limitations including that term appears to turn, not over what the evidence discloses, but only on whether the disclosure satisfies the plain meaning of “trigger” (see infra § II.E.2). Accordingly, while we apply the plain meaning of “trigger” in this proceeding, and in doing so, we address which party has properly applied the plain meaning and, in doing that, we address the scope properly afforded to “trigger.” That analysis, however, is done below in the context of the limitation in which this issue arises (see id.).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“has now been developed, and in view of both parties’ arguments, we find Petitioner has persuasively shown that modifying Ono’s peripheral device (i.e., communications module 44) to include an input device/physical actuator like the one described for Ono’s remote controller 69 to control the display of image data from a particular user’s computer would have been obvious to a skilled artisan at the time of the invention. More specifically, Petitioner has shown persuasively Ono shows that the use of an input device/physical actuator to send a signal that causes a participant’s computer to transmit and control the image data presented on a shared display in an image display system was a known technique (see Ex. 1005 ¶¶ 7, 44–48, 66– 71, 77–78, 80–89, 144, Figs. 3, 6, 8, 9; Ex. 1002 ¶¶ 85–100, 121–127) and available location for such an input device/physical actuator to initiate the transmission of data (see Ex. 1007 ¶¶ 6, 18, 20, 22–23, 26, 28, 46, Fig. 1; Ex. 1002 ¶¶ 92–100). Petitioner has also persuasively shown that a skilled artisan recognized benefits to giving a participant the ability to locally control the display of their computer’s image data. See Ex. 1002 ¶¶ 87–91; Ex. 1008 ¶¶ 4, 19–20, 27–28; Ex. 1009 ¶¶ 10–13, 39–10, 70–72. When Ono and Corbett are considered together as a whole from the perspective of a skilled artisan, therefore, it is clear that applying a similar input device/physical actuator to Ono’s peripheral device would have been recognized to result in the benefit of providing a participant with the same ability to send a signal that causes a participant’s computer to transmit and control the image data presented on a shared display from their computer within an image display system. As a result, a motivation has been established because the combination is an application of a known technique to derive a known benefit using prior art elements according to their established functions. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023).” slip op. at 24
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“that, from their perspective, the plain meaning of the term “trigger” does not exclude intervening steps between a user’s action on an input device and the ultimate transfer of the user selected arbitrary media content. Pet. Reply 11– 12 (indicating that “trigger” encompasses “a process that begins with and thus is triggered by a user pressing a button followed by an ‘image transfer’ from a PC to a projector”). For its part, Patent Owner maintains (at least implicitly) that intervening steps are excluded from the plain meaning. Neither party addresses with more specificity why, or why not, the scope of “trigger” supports their positions, however. Having now the complete record before us, we find that out preliminary assessment was wrong because the plain meaning of the term “trigger” does not exclude intervening steps between the cause-and-effect relationship of the trigger and the result it is intended to cause. Take, for example, a simple gun. Pulling the “trigger” to fire a gun necessarily includes intervening steps to occur: the trigger releases a hammer that, in turn, contacts a blasting cap within a bullet casing, which is what actually causes the gunpowder to ignite (i.e., fire) and expel the bullet. And there is no evidence in this record to suggest that this customary understanding of the word “trigger” is any different in the electrical arts, other than the trigger and result are generally electrical in nature, rather than mechanical. We find no clear disavowal of claim scope within the intrinsic record of the ’951 patent to indicate that the term “trigger” was intended to be understood any differently to exclude any intervening steps between a user’s action on an input device and the resulting transfer of user selected arbitrary media content. intervening steps would exist because the input device does not actually do the transferring of the media content; instead, the claims recite the transferring is “from the transmitter to the wireless communications network and [then] to the base node.” See Ex. 1001, 11:3–48, 27:62–28:1 (claim 1), 28:62–67 (claim 9), 29:42–46 (claim 16), 30:36–44 (claim 21) (emphasis added). A skilled artisan would have recognized that there would be intervening steps between the input device being acted upon and the content being displayed by base node’s display. See Ex. 1083 ¶¶ 11–12. In the claims, the input device is analogous to a gun’s trigger, the user carrying out a user action on the input device is analogous to pulling a gun’s trigger, and the transfer of user selected arbitrary media content is analogous the gun expelling a bullet. In both cases, there can be, and usually are, intervening steps, moreover, in both cases, inadvertent things can happen that may prevent the intended result (e.g., in the case of a gun, the hammer can jam; in the case of an input device, a connection can be rejected). Nevertheless, in both cases, the trigger is the thing that initiates an automated process that leads to a particular result, unless a conditional error occurs.” slip op. at 31
Patent outcomesUS 11,422,951 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,422,951 - Yealink (USA) Network Technology Co. Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentablePTAB · Apr 7, 2026 · IPR2024-01438 · APJ Frederick C Laney · IPR · Final written decision
Claims 1, 4, 5, 8, 14, 16, and 18–20 are unpatentable under § 103 based on the five asserted obviousness grounds.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006) (“[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” (alteration in original)). This search for answers about whether the claimed subject matter would have been obvious to a skilled artisan at the time of the invention applies “an expansive and flexible art elements would have been obvious is determined by whether the improvement is more than the predictable use of prior art elements according to their established functions. Id. at 417. Reaching this conclusion, however, “requires more than a mere showing that the prior art includes separate references covering each separate limitation in a claim under examination.” Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “Rather, obviousness requires the additional showing that a person of ordinary skill at the time of the invention would have selected and combined those prior art elements in the normal course of research and development to yield the claimed invention.” Id.” slip op. at 6
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner
“3. Conclusion as to Secondary Considerations We have considered all of Patent Owner’s arguments and evidence concerning secondary considerations. We give Patent Owner’s evidence regarding its revenue and profits from the ClickShare product line little weight. We give some weight to Patent Owner’s evidence of licensing. We, however, do not find the licensing evidence outweighs Petitioner’s showing of obviousness.” slip op. at 86
Patent outcomesUS 11,258,676 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,258,676
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.