• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Billerud Aktiebolag (Publ) v. Westrock MWV, LLCSome claims unpatentable
  PTAB · Mar 12, 2025 · IPR2023-01206 · APJ Elizabeth M Roesel · IPR · Final written decision

  Claims 1, 2, and 4–22 are unpatentable as obvious; claim 23 was not shown unpatentable. Substitute claims 25–26 are allowed, while 24 and 27 are denied for lack of written-description support.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert discountedOther

    “Exhibits 1013 and 1014 are also not admissible as expert testimony because Mr. Wirén is not “qualified as an expert by knowledge, skill, experience, training, or education.” Fed. R. Evid. 703. “To offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). Mr. Wirén does not meet our definition of a person of ordinary skill in the art. See Section II.B, supra. That definition is based on the undisputed testimony of Messrs. Zotterman and Klass. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. Although Mr. Wirén has a Master’s of Science in chemical engineering, he lacks any experience or specialization in paperboard manufacturing. Ex. 2011, 12:1–10, 19:6–25, 20:2–7. We therefore agree with Patent Owner that Exhibits 1013 and 1014 are the testimony of Mr. Wirén and should be excluded from evidence because Mr. Wirén is not a person of ordinary skill in the relevant art. PO MTE 5–6, 9; Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362 (Fed. Cir. 2008) (“Unless a patent lawyer is also a qualified technical” slip op. at 61

  • Skill levelSkill level board ownOther

    “Level of Ordinary Skill in the Art Based on the testimony of the parties’ witnesses, we determine that a person of ordinary skill in the art would have had a bachelor’s degree in paper science and engineering, chemical engineering, process engineering, mechanical engineering, or a related degree, with three to five years of experience in paperboard manufacturing, or a master’s degree in paper science and engineering, chemical engineering, process engineering, or mechanical engineering, or a similar field with a specialization in paperboard manufacturing. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’142 Patent Specification and the asserted prior art references.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDecided for petitioner

    “A claim construction that excludes a particular element is viewed as a “negative limitation.” Ethicon LLC v. Intuitive Surgical, Inc., 847 Fed. App’x 901, 907 (Fed. Cir. Mar. 15, 2021). “[S]uch exclusions must find support either in ‘the words of the claim’ or through an ‘express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.’” Id. (citing Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002)). “The standards for finding lexicography and disavowal are exacting.” GE Lighting Sols., LLC v. AgiLight, Inc., 750 F.3d 1304, 1309 (Fed. Cir. 2014). “To act as its own lexicographer, a patentee must ‘clearly set forth a definition of the disputed claim term,’ and ‘clearly express an intent to define the term.’” Id. (citing Thorner, 669 F.3d at 1365). Similarly, disclaimer or disavowal requires that the specification or prosecution history demonstrate that the invention does not include a particular feature. Id. Here, we find no claim language, lexicography, or disclaimer in the ’142 Patent or its file history that would support defining a “hot-hard calender” as requiring that only one of the two rollers be heated to an elevated temperature.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “a contact surface of said thermo-roller is heated to an elevated temperature of at least 250°F.” Petitioner shows persuasively that the temperature limitation is taught by the combination of Fugitt and Papermaking. Pet. 32–34. Fugitt discloses that “[t]he rolls of the calender may be steam heated.” Ex. 1004 ¶ 26. In a section titled “Heated Rolls,” Papermaking discloses that “Steam can be used up to 170°C [338°F] surface temperature.” Ex. 1010, 95, 98. Petitioner is thus correct that, “[w]hile Fugitt teaches that a hot calender may be steam heated, Papermaking clarifies that one of ordinary skill in the art would understand that steam heated thermo-rollers may reach up to 338°F.” Pet. 36. Based on these disclosures, we are persuaded by Mr. Zotterman’s testimony that it would have been “obvious to heat the thermo-roller of Fugitt to at least 250°F.” Ex. 1003 ¶ 159. combine Fugitt and Papermaking because of Papermaking’s status as a “trusted handbook[],” because both references disclose a method of manufacturing a paperboard structure with hot calendering,” and “because of the known advantages of heated rollers.” Pet. 36–37; Ex. 1003 ¶¶ 157, 159, 162. Petitioner’s contention is supported by Papermaking’s disclosures that, for cartonboard, “[p]recalendering is used before the coater to reduce roughness and porosity” and “[h]igh thermo roll temperatures (in some cases over 200°C) result in bulk savings because of the temperature gradient.” Ex. 1005, 80–82; see also Pet. 38; Ex. 1003 ¶ 164 (citing these disclosures). Papermaking’s disclosed range of “up to 170°C [338°F]” for steam- heated rolls (Ex. 1010, 98), overlaps the claimed range of “at least 250°F.” Patent Owner agrees. Tr. 27:11–13. “If the relevant comparison between a disputed claim limitation and the prior art pertains to a range of overlapping values, ‘. . . even a slight overlap in range establishes a prima facie case of obviousness.’” Genentech, Inc. v. Hospira, Inc., 946 F.3d 1333, 1341 (Fed. Cir. 2020) (citing In re Peterson, 315 F.3d 1325, 1329 (Fed. Cir. 2003)). “[S]uch an overlap creates a presumption of obviousness, and . . . the burden of production falls upon the patentee to come forward with pertinent evidence that the overlapping range would not have been obvious in light of the prior art.” Id. (citing E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1006, 1008 (Fed. Cir. 2018)). slip op. at 21

  Patent outcomesUS 11,293,142 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 11,293,142
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Ericsson Inc. v. Koninklijke KPN N.V.Some claims unpatentable
  PTAB · Oct 4, 2023 · IPR2022-00557 · APJ Kevin F Turner · IPR · Final written decision

  Claims 1, 10–12, 21, 22, 24, and 25 are unpatentable as obvious; claims 2, 3, 6, and 8 were not shown unpatentable; the contingent motion to amend is denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “a person of ordinary skill in the art at the time of the invention “would be a person with a B.S. degree in electrical engineering, computer engineering, or equivalent training or job experience, with two years of experience in computer networking technology, or a Master’s degree in electrical engineering, computer engineering, or other equivalent degree.” Pet. 13 (citing Ex. 1003 ¶ 47). Patent Owner indicates that it does not challenge the qualifications proposed by Petitioner for a person of ordinary skill in the art. PO Resp. 14. We find Petitioner’s proposal consistent with the level of ordinary skill in the art reflected by the prior art of record, see Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978), and, therefore, we continue to adopt Petitioner’s unopposed position as to the level of ordinary skill in the art for purposes of this decision.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “associated sessions” With respect to the limitation “associated sessions,” Patent Owner asserted that the ’669 Patent defines those sessions as those that “should not be managed independent from each another,” and continues to assert the same in its Response. PO Resp. 14–15 (quoting Ex. 1001, 7:37–38). Based on the recitations of the Specification, we construe “associated sessions” as “sessions that should not be managed independent from each other,” as proffered by Patent Owner. Ex. 1001, 7:37–38. slip op. at 8

  • Prior constructionTerm construed board ownDecided for petitioner

    “Patent Owner asserts that the United States District Court for the Eastern District of Texas rejected Petitioner’s proposed construction in the District Court Case, and following briefing and oral argument in that proceeding, the District Court concluded that “composition session” means “a signaling session that is separate from the associated sessions and that is for facilitating management of the associated sessions.” PO Resp. 16. Having reviewed the District Court’s determination, we do not discern a significant difference in scope between it and Petitioner’s formulation, and we, thus, adopt its construction of “composition session” in the analysis below.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “As such, we continue to determine that Petitioner has sufficiently established that an ordinarily skilled artisan would have had a rationale to combine the teachings of Foti with RFC 3261, RFC 4566, RFC 2326, Wright, and Lloyd, and would have had a reasonable expectation of success in achieving that combination, as we determined in the Institution Decision. See Inst. Dec. 17–18. We continue to be persuaded that one of ordinary skill in the art would have consulted and utilized disclosures in the RFC references to understand and implement the protocols disclosed by Foti. We are further persuaded by Petitioner’s arguments that such skilled artisans would have had a rationale to combine the teachings of Wright and Lloyd with those of Foti for the reasons provided. Petitioner has asserted that each of the supporting references would have been used by persons of ordinary skill in the art to modify or enhance the system described in Foti for the benefits described for the proposed changes. Absent reasons the references should not be combined, we determine that the motivation proffered by the Petition is sufficient to support the combination, under the preponderance of the evidence standard.” slip op. at 16

  Patent outcomesUS 9,667,669 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 9,667,669
• Dr. Reddy’S Laboratories, Inc. v. Genentech, Inc., Hoffman-La Roche AG, And Abbvie Inc.Some claims unpatentable
  PTAB · Jul 5, 2023 · PGR2022-00023 · APJ Robert A Pollock · PGR · Final written decision

  The Board held claims 2, 3, 5, 14, 26, 27, and 30 unpatentable for lack of written description, but did not find claims 1, 6, and 25 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “We do not discern a substantive difference between the parties’ respective definitions for the level of ordinary skill in the art. Although Petitioner did not expressly recite hematological malignancies, Petitioner did refer to expertise in clinical oncology and cancer biology, which would encompass the blood cancers recited by Patent Owner. Accordingly, we find the parties’ respective definitions to be equivalent and consistent with the level of ordinary skill in the art as reflected by the prior art in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). We find that Dr. Gordon and Dr. Sharman are both qualified to opine from the perspective of a skilled artisan as both are persons of at least ordinary skill in the art, based on either party’s definition. Ex. 1020, ¶¶ 8– 19; Ex. 2008, ¶¶ 11–24.” slip op. at 7

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “We find Dr. Sharman’s statements and deposition testimony have substantially greater credibility than Dr. Gordon’s statements and deposition testimony based on Dr. Sharman’s significantly greater relevant experience in treatment and study of hematological cancers using chemotherapeutic agents and based on Dr. Sharman’s superior recollection and more complete analysis of the record found in the ’942 patent. In particular, we found Dr. Gordon’s statement that no example “includes” every element of claim 1 factually incorrect as contradicted by at least Figure 2 of the ’942 patent where the ordinary understanding of includes to mean encompasses is used. See Ex. 1020 ¶ 131. Ebit Sys. Am., LLC v. Thales Visonix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (“The PTAB [i]s entitled to weigh the credibility of the witnesses ....”).” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “The parties do not identify any issue relating to the preamble that needs to be addressed to resolve the sole written description challenge and the parties do not dispute that the transitional term “comprising” is “inclusive or open-ended and does not exclude additional, unrecited elements or method steps.” Georgia-Pacific Corp. v. US. Gypsum Co., 195 F.3d 1322, 1327 (Fed. Cir. 1999). We therefore find that there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateWritten description inadequateMixed

    “We find that Figure 2 of the ’942 patent and the associated example provide literal and express descriptive support for claim 1 of the ’942 patent. As descriptive support for claim 1, the ’942 patent teaches treatment of leukemia or lymphoma, including chronic lymphocytic leukemia and small lymphocytic lymphoma (Ex. 1001, 16:21–22), by orally administering the Bcl-2 inhibitor GDC-0199 (Ex. 1001, 17:16) in escalating doses of 50 mg per day during a first week and 100 mg per day during a second week (Ex. 1001, Figure 2). Claim 1 of the ’942 patent, as written, does not exclude performance of the complete combination therapy shown in Figure 2. Rather, the reasonable understanding of the term “comprising” in claim 1 encompasses monotherapy with GDC-0199 alone and combination therapy with obinutuzumab. Both embodiments are described in the Specification. As Patent Owner points out, the ’942 Specification is replete with disclosures to administer GDC-0199 by itself to a patient, stating” slip op. at 16

  Patent outcomesUS 10,993,942 mixed
  Claim construction§ 112 disclosure
  Patents in suitUS 10,993,942
• Pelican Biothermal, LLC v. Va-Q-Tec AGSome claims unpatentable
  PTAB · Jun 16, 2023 · PGR2021-00085 · APJ Barry L Grossman · PGR · Final written decision

  The Board granted the motion to amend but held amended claim 64 unpatentable as anticipated by NanoCool 98596-type products and obvious over the cited combinations; all other amended claims were not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that Petitioner has demonstrated by a preponderance of the evidence that amended claim 64 is unpatentable; FURTHER ORDERED that Patent Owner’s Non-Contingent Motion to Amend is granted for claims 64 and denied for all other amended claims; and” slip op. at 77

  • ExcludeMotion to exclude, deniedDenied

    “A. Status as Prior Art Is a Substantive Issue, Not an Evidentiary Issue. A motion to exclude is not an appropriate mechanism for challenging the sufficiency of evidence, such as whether a reference qualifies as prior art, or the proper weight that should be afforded an argument. See Flir Systems, Inc. v. Leak Surveys, Inc., IPR2014-00411, Paper 113, 4, 8–9 (PTAB September 3, 2015); PTAB Consol. Trial Practice Guide 79 (Nov. 30 Mr. Zumwalt testifies that other NanoCool products, designated by product number 85430 and 98630, also have the same configuration as the 98830 product and are made by the same process. Thus, “the 98830, 85430, and 98630 products can be collectively referred to as ‘98830-type’ products all having the same relevant design.” Ex. 1030 ¶ 17. 2019) (“A motion to exclude . . . may not be used to challenge the sufficiency of the evidence to prove a particular fact. A motion to exclude is not a vehicle for addressing the weight to be given evidence—arguments regarding weight should appear only in the merits documents.”); Caterpillar Inc. v. Wirtgen Am., Inc., IPR2017-02187, Paper 42,17 (PTAB May 21, 2019) (status as prior art “is a substantive issue, not an evidentiary issue.”) Thus, whether the NanoCool 98830 product is prior art is not the proper basis for Patent Owner’s Motion to Exclude evidence concerning the NanoCool 98830 product.” slip op. at 29

  • Skill levelSkill level board ownOther

    “Neither Petitioner nor Mr. Harber provide any analysis of the factors pertinent to a determination of the level of ordinary skill, identified above, to support their conclusory statements. We give Mr. Harber’s conclusory testimony minimal probative weight. 37 C.F.R. § 42.64(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Moreover, there is no persuasive evidence to which we have been directed of the need for specific education or experience in biological or chemical technologies related to the claimed containers and inserts.” slip op. at 26

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “With regard to the level of ordinary skill in the art, Petitioner asserts that a person of ordinary skill would have had “a bachelor’s degree or higher degree in biological, chemical or mechanical engineering, or related sciences, and at least two to five years of experience in designing and testing ISCs [insulated shipping containers] depending on education level.” Pet. 9 (emphasis added) (citing Ex. 1002 ¶¶ 23–24). Exhibit 1002 is the Declaration testimony of Mr. Paul Haber. Mr. Harber actually states a slightly different level of ordinary skill. Mr. Harber testifies: The hypothetical POSITA would have: (i) at least a bachelor’s degree in biological, chemical or mechanical engineering, or related sciences, and have at least three to five years of experience in designing and testing ISCs [Insulated Shipping Containers][29]. Such a person may also have (ii) a higher level degree, such as a PhD and/or Master’s degree in engineering, or related sciences, and have at least two to three years of experience in designing and testing ISCs. 29 See Ex. 1002 ¶ 23. Ex. 1002 ¶ 24 (emphasis added). Mr. Harber also testifies that “[t]hese descriptions are approximate, and a higher level of education or specific skill might make up for less experience, and vice-versa.” Id.” slip op. at 25

  Patent outcomesUS 10,766,685 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,766,685
• Apple Inc. v. Memoryweb, LLCSome claims unpatentable
  PTAB · Jun 7, 2023 · PGR2022-00006 · APJ Jason M Repko · PGR · Final written decision

  Claims 1–12, 17–44, and 49–59 are unpatentable over A3UM or for lack of written description; claims 13–16 and 45–48 were not shown unpatentable.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “2. Analysis A person is not entitled to a patent if their invention was “described in” slip op. at 9

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art According to Petitioner, A person of ordinary skill in the art in 2011 would have had (1) at least a bachelor’s degree in computer science, computer engineering, or electrical engineering, and (2) at least applications such as photo management systems. Pet. 12 (citing Ex. 1003 ¶¶ 44–46). In the Institution Decision, we applied Petitioner’s proposed definition. Inst. Dec. 12. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art. PO Resp. 7. We continue to find that the skill level identified by Petitioner (Pet. 12) is consistent with the record. Thus, we use the same definition here that we used in the Institution Decision.” slip op. at 30

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “e. Conclusion Petitioner provides articulated reasoning, supported by rational” slip op. at 68

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “11. Written Description: Claims 6, 7, 38, and 39 Petitioner asserts that claims 6, 7, 38, and 39 are unpatentable as lacking adequate written-description support. Pet. 91–93. Claim 6 recites, in part, “The method of claim 4, wherein, in the people view, the first name is displayed adjacent to the first digital file associated with the first thumbnail image and the second name is displayed recites similar limitations. See id. at 38:47–50. Claim 7 depends from claim 6, and claim 39 depends from claim 38. Id. at 35:63–65 (claim 7), 38:51–53 (claim 39). Petitioner asserts that claims 6 and 38 require that the “people view” includes at least the following: (i) “a first thumbnail image associated with a first person,” (ii) “a first name associated with the first person,” (iii) “a second thumbnail image associated with a second person,” (iv) “a second name associated with the second person,” and (v) a “first digital file associated with the first person.” Pet. 91. Petitioner argues that the ’020 patent lacks written-description support for a people view with these features. Id. at 92 (citing Ex. 1003 ¶ 315). Under Petitioner’s interpretation, digital files are “plainly distinct”” slip op. at 96

  Patent outcomesUS 11,017,020 mixed
  § 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR
  Patents in suitUS 11,017,020
• Simpson Strong-Tie Company Inc. v. Columbia Insurance CompanySome claims unpatentable
  PTAB · Mar 15, 2023 · PGR2021-00109 · APJ Stephen E Belisle · PGR · Final written decision

  Claims 1–12, 15–17, and 21–23 are unpatentable; the revised contingent motion to amend is granted for claim 32 and denied for claims 24–31, 33–35, 38–40, and 44–46.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art, at the time” slip op. at 22

  • BurdenNot shown unpatentable

    “Accordingly, based on the foregoing and the complete record before” slip op. at 38

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “C. Claim Construction We apply the claim construction standard articulated in Phillips v.” slip op. at 23

  • Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteMixed

    “persuaded by Petitioner that the limitations “a channel-shaped portion configured to receive the structural component” and “a base configured to receive an end portion of the structural component thereon to support the structural component” would not have informed the skilled artisan, with reasonable certainty, about the scope of the claimed invention. See Energizer Holdings, Inc. v. Int’l Trade Comm’n, 435 F.3d 1366, 1370 (Fed. Cir. 2006) (“When the meaning of the claim would reasonably be understood by persons of ordinary skill when read in light of the specification, the claim is not subject to invalidity upon departure from the protocol of ‘antecedent basis.’”). Accordingly, we conclude that Petitioner” slip op. at 40

  Patent outcomesUS 11,021,867 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 11,021,867
• Kiosoft Technologies, LLC / Techtrex, Inc. v. Payrange Inc.Some claims unpatentable
  PTAB · Dec 14, 2022 · PGR2021-00093 · APJ Ken B Barrett · PGR · Final written decision

  Claims 1–6, 8–10, 14, 15, and 18–25 are unpatentable under § 101; claims 7, 11–13, 16, and 17 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. The Level of Ordinary Skill in the Art In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (internal quotation marks and citation omitted). Petitioner contends: A [person of ordinary skill in the art (“POSITA” or “POSA”)] at the time of the earliest claimed filing date of the ’614 Patent would have had an education background of, or practical experience providing an equivalent to, a Bachelor of Science in Electrical Engineering, Computer Science, Information Technology, or a related/equivalent field and at least 3 years of academic or industry experience in electronic payment systems. Pet. 16 (citing Ex. 1003 ¶¶ 5–6). Patent Owner affirmatively states that it does not dispute Petitioner’s asserted educational background of a person of ordinary skill in the art. PO Resp. 7. Patent Owner does not dispute Petitioner’s proposed number of years of experience, instead contending that “the claims are patentable regardless of the number of years of work experience a POSA would have had.” Id. (citing Ex. 2019 ¶¶ 49–58). Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). We adopt Petitioner’s definition of the person of ordinary skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “construction disputes to find that Petitioners have failed to satisfy their burden of proof.” PO Resp. 8. Patent Owner goes on to state its agreement with Petitioner’s proposed construction for the “identifying” limitation (id. at 9) and indicate its disagreement with certain of Petitioner’s proposals (id. at 9–14). Patent Owner confirmed at the oral argument that no claim term needs to be construed to reach a dispositive issue. Tr. 33:23–34:5. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes.” slip op. at 11

  • Patent Eligibility (§101) › Alice/Mayo step one — 'directed to'Step1 directed to exceptionDecided for petitioner

    “All of the claimed method steps of claim 1 occur “at the mobile device” (element 1.1), and the method includes a step of enabling user interaction with the user interface to complete the vending transaction (element 1.9). Id. at 46:61–65, 47:24–28. Claim 1 does not recite completing the purchase. The ’614 patent describes a commercial transaction completed at the payment accepting unit (i.e. the vending machine), not at the mobile device. Ex. 1001, 7:15–19; see also id. at 16:46–50; 17:57–59; 19:17–20; 19:35–38. We, thus, agree with Patent Owner that the claimed method does not require completing or conducting the transaction, but only enabling the completion of the transaction. On this complete record, we are persuaded that the elements block quoted above recite the concept of identifying a merchant and enabling completion of a purchase from the merchant. See Pet. 20 (arguing that the claimed method “is no less abstract than a customer noticing a store, making a purchase, and receiving a receipt.”); Pet. Reply 5 (arguing that the claim describes “nothing more than a customer noticing and identifying a store amongst multiple stores based on the unique visual image of that store, entering the store and communicating with the merchant, making a purchase, and receiving a receipt—all while using conventional tools.”). In particular, claim 1 recites a step for identifying a merchant based on its advertised presence—identifying a nearby vending machine that is available to accept payment from a mobile payment application, with that identifying involving the broadcasting of predefined radio messages.8 Claim 1 also recites steps for enabling completion of a purchase from the merchant— establishing a communication connection between the user’s device and the vending machine; displaying an interface that allows a user to select a vending machine, to trigger payment for the vending transaction, and to enable the completion of the transaction; and updating the user interface after receiving information from the vending machine regarding the transaction (which, as indicated by dependent claim 3, may be information indicating that the vending transaction was completed). Our slight revision of the abstract idea from what we previously stated in our Institution Decision does not impact the patentability analysis. Apple, Inc. v. Ameranth, Inc., 842 F.3d 1229, 1241 (Fed. Cir. 2016).” slip op. at 17

  • Patent Eligibility (§101) › Alice/Mayo step two — inventive conceptStep2 no inventive conceptMixed

    “As discussed above, the Specification indicates that the short-range communication between the vending machine and mobile device can be not only conventional technologies such as Bluetooth, near-field communication (NFC), and radio frequency identification (RFID), but also could be “any wired or wireless technology that could be used to communicate a small distance (approximately a hundred feet or closer) that is known.” Ex. 1001, 9:57–67. The Specification ties that technology to the “broadcast” in claim 1 (id. at 47:2–5). For example, the Specification explains that “[e]ach adapter module 100 [of the vending machine] advertises its presence by broadcasting signals (advertising broadcast signals) to mobile devices in the zones 102, 104, 106.” Id. at 10:43–45. “The outermost range is the Bluetooth range 106 . . . [and] is the area in which the adapter module 100 is able to broadcast its presence.” Id. at 18:29–33. Further, Dr. Shamos testified that the Bluetooth protocol requires that two devices wishing to interact with each other identify themselves to each other. Ex. 1030, 102:3– 24. Dr. Shamos also testified that the Low prior art reference discloses that a vending machine identifies itself to the user. Id. at 100:9–20; see Ex. 1007, 2:25–28 (Low stating that, “in some embodiments, multiple machines may send their unique identifiers, such that the user is able to select one or more machines to purchase from.”). Thus, the abstract idea of identifying a merchant is implemented by nothing more than well-known, routine, and conventional wireless communications.” slip op. at 39

  Patent outcomesUS 10,891,614 mixed
  Claim construction§ 101 eligibility§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Mayo · Bilski · Phillips · KSR · Graham · Nautilus
  Patents in suitUS 10,891,614

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.