- PTAB · Nov 6, 2025 · PGR2025-00040 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–9, 11–33, and 35–38 on all petition grounds, finding it more likely than not that Hassfjell-Hoff anticipates at least claim 1.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 324(a), a post-grant review may be instituted only if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’437 patent is eligible for post-grant review and that it is more likely than not that at least one challenged claim of the ’437 patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of all challenged claims of the ’437 patent.” slip op. at 2
- Adverse judgmentAdverse judgmentOther
“Here, Patentee Sciencons AS filed a statutory disclaimer of claims 10 and 34 of the ’437 patent. Ex. 2001; Prelim. Resp. 43. Based on our review of Exhibit 2001 and the Office’s public records, we find that the disclaimer of claims 10 and 34 complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Accordingly, we treat claims 10 and 34 as having never been part of the ’437 patent. See Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because post-grant review cannot be instituted based on disclaimed claims, claims 10 and 34 are outside the scope of this proceeding. 37 C.F.R. § 42.207(e) (“No post-grant review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claims 1–9, 11–33, and 35– 38, the remaining challenged claims that have not been disclaimed.” slip op. at 6
- PTAB / AIA Trials › Real party in interest / privityGranted
“Sciencons AS also states that ARTBIO, Inc. is responsible for defending the ’437 patent in this proceeding and requests that ARTBIO, Inc. be included in the caption for this proceeding.2 Paper 4, 1. ARTBIO, Inc. has signed powers of attorney appointing the same practitioners that were appointed by Sciencons AS to transact all business associated with the instant post-grant review review of the ’437 patent. See Paper 3. To date, no objection has been raised to Patent Owner’s request. Given Sciencons AS’s representation that ARTBIO, Inc. is currently the exclusive licensee of the ’437 patent and is responsible for defending the ’437 patent, we grant Sciencons AS’s unopposed request that ARTBIO, Inc. be included in the caption. For convenience we refer to Sciencons AS and the purported exclusive licensee ARTBIO, Inc. collectively as “Patent Owner.” As stated supra, to the extent any party disputes ARTBIO, Inc.’s right to participate in this proceeding or to be included in the caption, the party shall request authorization to brief the issue within 10 business days of this Decision.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“nuclear chemistry, radiochemistry, or materials science, or a comparable field of study, plus approximately two to three years of professional experience with radioisotope generators, radiopharmaceutical chemistry, nuclear medicine, or other relevant industry experience” and that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 2–3 (citing Ex. 1002 ¶ 33; Ex. 1019 ¶ 27). At this stage of the proceeding, Patent Owner does not dispute Petitioner’s proposed definition nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposed definition of a POSITA.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 12,249,437 - Advancell Pty Ltd.InstitutedPTAB · Oct 14, 2025 · PGR2025-00029 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–6 and 8–20 on all asserted grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“After reviewing the parties’ briefs and supporting evidence, we determine that Petitioner has sufficiently shown that Hassfjell-Hoff discloses each element of claim 1. As such, Petitioner’s argument and evidence as set forth above and further discussed below, sufficiently shows that it is more likely than not that claim 1 is anticipated by Hassfjell-Hoff, notwithstanding Patent Owner’s arguments, also addressed below.” slip op. at 16
- Adverse judgmentAdverse judgmentOther
“Here, Patentee Sciencons AS filed a statutory disclaimer of claim 7 of the ’603 patent. Ex. 2001. Based on our review of Exhibit 2001 and U.S. Patent and Trademark Office public records, we find that the disclaimer of claim 7 complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Accordingly, we treat claim 7 as having never been part of the ’603 patent. See Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because post-grant review cannot be instituted based on disclaimed claims, claim 7 is outside the scope of this proceeding. 37 C.F.R. § 42.207(e) (“No post-grant review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claims 1–6 and 8– 20, the remaining challenged claims that have not been disclaimed.” slip op. at 7
- PTAB / AIA Trials › Real party in interest / privityGranted
“Sciencons AS also states that ARTBIO, Inc. is responsible for defending the ’603 patent in this proceeding and requests that ARTBIO, Inc. be included in the caption for this proceeding.2 Paper 4, 1; Paper 7, 1. ARTBIO, Inc. has signed powers of attorney appointing the same practitioners that were appointed by Sciencons AS to transact all business associated with the instant post-grant review proceeding of the ’603 patent. See Papers 3, 4, 7, 8. To date, no objection has been raised to Patent Owner’s request. Given Sciencons AS’s representation that ARTBIO, Inc. is currently the exclusive licensee of the ’603 patent and is responsible for defending the ’603 patent, we grant Sciencons AS’s unopposed request that ARTBIO, Inc. be included in the caption. For convenience we refer to Sciencons AS and the purported exclusive licensee ARTBIO, Inc. collectively as “Patent Owner.” As stated supra, to the extent any party disputes ARTBIO, Inc.’s right to participate in this proceeding or to be included in the caption, the party shall request authorization to brief the issue within 10 business days of this Decision.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a bachelor’s degree in chemistry, chemical engineering, physics, nuclear chemistry, radiochemistry, or materials science, or a comparable field of study, plus approximately two to three years of professional experience with radioisotope generators, or other relevant industry experience” and that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 2–3 (citing Ex. 1002 ¶ 33; Ex. 1017 ¶ 27). At this stage of the proceeding, Patent Owner does not dispute Petitioner’s proposed definition nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposed definition.” slip op. at 10
§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 12,125,603 - PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - PTAB · Aug 16, 2024 · IPR2023-00658 · APJ Scott A Daniels · IPR · Final written decision
The Board canceled original claim 1, denied the proposed substitute claim as indefinite under § 112, and did not reach the asserted obviousness grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We have, on the complete record now before us, mainly the testimony of Petitioner’s declarant, Mr. Hatch, who testifies that the designer of ordinary skill in the art would be a person who has a bachelor’s degree in furniture design or an equivalent field or alternatively two years of practical experience designing furniture . . . [which] is appropriate given the relatively simple nature of the design at issue, which involves little more than two boards forming a tabletop. Ex. 1002 ¶¶ 34–35. Based on the complete record, we adopt Petitioner’s articulation of a designer of ordinary skill as it is supported by the testimony of Mr. Hatch. Id. ¶¶ 33–38. We also note that, based on the complete trial record, our” slip op. at 18
- Expert testimonyPetitioner expert creditedDecided for petitioner
“In contrast, Patent Owner’s declarant, Mr. Williams, testifies based on his “experience[,] that tenons are generally included in the larger portion of two table top portions.” Ex. 2006 ¶ 55. However, Mr. Williams’ experience does not explain why an ordinary observer would understand such functional and ornamental characteristics of tenon and hole arrangements. Id. Nor does this testimony proclaim that tenons must be in the larger of two table top potions. Indeed, even considering an ordinary observer imbued with Mr. Williams’ level of expertise and experience, and understanding for instance that it may be more likely that the wider portion includes tenons, this does not resolve the glaring inconsistency that Figure 1 illustrates holes and Figure 8 illustrates tenons. In other words, Mr. Williams’ “experience” does not resolve the visible tension that, on one hand, Figure 1 illustrates holes as part of the claimed ornamental design in the wider portion of the table top, and on the other hand, Figure 8 illustrates tenons as part of the same wider portion of the table top. The problem here may be more eloquently explained as “Two roads diverged in a yellow wood[,] And sorry I could not travel both.” Robert Frost, The Road Not Taken, The Poetry of Robert Frost—The Collected Poems, 105, Henry Holt and Co. (1969). Considering the entire record before us in this case we credit Mr. Hatch’s testimony. The issue is not, as Patent Owner has framed it, whether “[o]ne of ordinary skill in the art would understand how the tenons and holes should be positioned on each of the table top portions.” Reply Opp. 7. The question is whether a person of ordinary skill in the art viewing the design for a table top in the proposed substitute claim as would an ordinary observer, understand whether or not the wider portion of the table top as Figures 1 and 6, holes. As Mr. Hatch persuasively explains, in the proposed substitute claim a majority of the drawings for the wider portion, i.e., Figures 1–6, omit the tenons added in Figure 8. Ex. 1011 ¶ 37 (Mr. Hatch testifying that “Figure 8 is the only amended figure that adds tenons/dowels.”) Indeed, Figures 1 and 6 not only fail to illustrate tenons, but actually are amended to include holes rather than tenons, as described in the Motion to Amend. See, e.g., Motion to Amend 6 (Patent Owner describing, “Figure 1: Removal of disclaimer of a total of four holes by amending the outline of the four holes from broken lines to solid lines.”). On the complete record in this proceeding, we determine that a” slip op. at 28
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“On the complete record in this proceeding, we determine that a designer of skill in the art considering the claim from either their own, or the perspective of an ordinary observer, would be uncertain whether the wider portion of the claimed table top depicted in Figures 1–8 includes tenons, or holes. It is reasonable that anyone observing two distinct ornamental designs for the same wider portion of the table top would be unclear as to the claimed ornamental design where holes are shown in one figure but tenons are shown in another figure illustrating the same wider portion of the table top. Observing as a whole, the figures illustrating the table top in the proposed substitute claim, the question remains, does the wider portion of the table top include tenons, or holes? See Maatita, 900 F.3d at 1376 (“Ultimately, a patent is indefinite for § 112 purposes whenever its claim, read in light of the visual disclosure (whether it be a single drawing or multiple drawings), ‘fail[s] to inform, with reasonable certainty, those skilled in the art about the scope of the invention.’”) (quoting Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898 (2014)). proposed substitute claim fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” See Nautilus, 572 U.S. at 910. Thus, Petitioner has shown, by a preponderance of the evidence, that the proposed substitute claim is indefinite and we accordingly deny Patent Owner’s Noncontingent Motion to Amend.” slip op. at 29
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteUnpatentable
“Federal Circuit recently explained that “a design patent is indefinite under § 112 if one skilled in the art, viewing the design as would an ordinary observer, would not understand the scope of the design with reasonable certainty based on the claim and visual disclosure.” In re Maatita, 900 F.3d 1369, 1377 (Fed. Cir. 2018). In Maatita, the Federal Circuit reversed the Board’s finding of indefiniteness of a design for a shoe bottom, i.e., a shoe sole, finding that Maatita’s two-dimensional drawing clearly demonstrates the perspective from which the shoe bottom should be viewed. A potential infringer is not left in doubt as to how to determine infringement. In this case, Maatita’s decision not to disclose all possible depth choices would not preclude an ordinary observer from understanding the claimed design, since the design is capable of being understood from the two-dimensional, plan- or planar-view perspective [] shown in the drawing. Id. at F.3d 1378–79. Different from Maatita, the issue in this proceeding is not whether an ordinary observer would sufficiently understand a three-dimensional ornamental design from a two-dimensional figure, but whether inconsistencies between figures of the proposed substitute claim render the scope of the claimed table top uncertain. See Maatita, 900 F.3d at 1376 (The Federal Circuit specifically distinguishing Maatita’s single two-dimensional drawing from indefiniteness issues raised by inconsistent drawings: “[h]ere, we are not dealing with inconsistencies in the drawings, or inconsistencies between the drawings and the verbal description, but” slip op. at 24
§ 103 obviousness§ 112 disclosurecites Nautilus - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.
RulingsInstitution decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37
- Other 314aDecided for petitioner
“B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40
§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Institution
Instituted IPR on claims 1–16 because Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–16 of the ’923 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995). One may show support for the claims of a later application by showing that a single, earlier application provides written description support for the claims. PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); Studiengesellschaft Kohle, MBH v. Shell Oil Co., 112 F.3d 1561, 1564 (Fed. Cir. 1997) (noting that a patentee “cannot distinct previous applications”). Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner
“Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“7. Analysis: Reasons to Combine the References Petitioner shows sufficiently that Yoakim, Jarisch and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/espresso machines.” Pet. 43. “Yoakim and Jarisch both improve the optimization of beverage parameters in a single-serve brewing system, and use optical codes read by the machine to achieve this.” Id. “Rapparini further improves the the wall of the capsule body like those used in Yoakim and Jarisch.” Id. at 43–44; see id. at 50–51, 53–54 (Petitioner’s further argument that Rapparini discloses “an optimized capsule structure that is stiffer and more stable” by virtue of radially spaced and vertically oriented ribs and grooves, where the vertically oriented grooves are free from extending entirely to the bottom region of the capsule). Petitioner directs us to additional evidence tending to establish that an ordinarily skilled artisan would have been prompted to modify Yoakim’s device, to include the code placement of Jarisch and the grooves and ribs of Rapparini, to arrive at the claimed invention with an expectation of success. Id. at 44–48.” slip op. at 27
§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites PhillipsPatents in suitUS 10,994,923 - PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther
“On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 10,689,740
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.