- Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854 - Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - PTAB · Jan 24, 2024 · IPR2023-01184 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR on claims 1–19 and all petition grounds, finding a reasonable likelihood that claims 1, 2–4, 6–8, 15–16, and 18–19 are unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition and the evidence of record, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. Accordingly, we institute an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Entitled to earlier dateOther
“Although Petitioner has asserted the absence of specific supporting disclosure for claims 1, 15, and 18 from the ’780, ’317, and ’977 applications and the ’155, ’587, ’601, ’977, and ’753 provisional applications, the burden to show an effective filing date (or dates) of the challenged claims prior to April 22, 2010 falls on Patent Owner here because Petitioner has asserted prior art references with earlier effective dates. In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1376 (Fed. Cir. 2016) (In an inter partes review, “a patentee bears the burden of establishing that its claimed invention is entitled to an earlier priority date than an asserted prior art reference.”). An earlier effective filing date is not presumed because, as shown in the above figure, the ’783 application is a continuation-in-part to each of the ’780, ’317, and ’977 applications that have filing dates earlier than April 22, 2010. See PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1305 (Fed. Cir. 2008) (“When neither the PTO nor the Board has previously considered priority, there is simply no reason to presume that claims in a [continuation-in-part] application are entitled to the effective filing date of an earlier filed application.”). On this record, and in the absence of the development of any contrary argument, we find that Petitioner has demonstrated sufficiently for institution that each of the asserted references are prior art to the challenged claims. The parties will have an opportunity to present their positions on the issue of the effective filing date of the challenged claims further during trial.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“of Kronberg, discloses or suggests all of the elements of claim 6. Pet. 28–34 (citing Ex. 1002 ¶¶ 107–148). More particularly, Petitioner argues that Adest discloses the limitations of claims 6, but to the extent there is a dispute that Adest discloses the “watchdog unit” limitation [6A], a person of ordinary skill in the art would have been motivated to combine the watchdog apparatus taught by Kronberg with the solar power system taught by Adest to monitor communications between signal mechanism 420 and power modules 405 of Adest. Id. at 32 (citing Ex. 1002 ¶ 127). Petitioner further argues that the watchdog taught by Kronberg was a well-known technique for detecting malfunctions at the time of the invention, and would have been one of a number of solutions for detecting the absence of a periodic signal. Id. (citing Ex. 1002 ¶¶ 128–129; Ex. 1009, 1269). Petitioner further argues that Kronberg “suggests that its watchdog apparatus is to be used to provide ‘automatic shutdown of critical devices in case of failure,’” consistent with Adest’s objective of shutting down a power generating facility when a transmitter fails to send a communication because of, for example, a fire or theft of a photovoltaic module. Id. at 32–33 (citing Ex. 1006, 1:12–15; Ex. 1005, 7:6–12).” slip op. at 19
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“The limitation “means to poll the central controller to determine if an interruption of the communication is transient” presumptively invokes 35 U.S.C. § 112 ¶ 6. Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc in relevant part). Claims subject to 35 U.S.C. § 112 ¶ 6 are construed in a “two-step process,” whereby we “first identify the claimed function,” and then “determine what structure, if any, disclosed in the specification corresponds to the claimed function.” Id. at 1351. Accordingly, our rules require that the Petition “identify the specific portions of the specification that describe the structure, material, or acts corresponding to each claimed function.” 37 C.F.R. § 42.104(b)(3). Further, “the corresponding structure for a § 112 ¶ 6 claim for a computer-implemented function is the algorithm disclosed in the specification” Aristocrat Techs. Austl. Pty Ltd. v. Int’l Game Tech., 521 F.3d 1328, 1333 (Fed. Cir. 2008) (quoting Harris Corp. v. Ericsson Inc., 417 F.3d 1241, 1249 (Fed. Cir. 2005)). Federal Circuit precedent requires disclosure of an algorithm in the specification for any computer-implemented function beyond “basic functions of a microprocessor.” See EON Corp. IP Holdings, LLC v. AT&T Mobility LLC, 785 F.3d 616, 623 (Fed. Cir. 2015) (“A microprocessor or general purpose computer lends sufficient structure only to basic functions of a microprocessor. All other computer implemented functions require disclosure of an algorithm.”). Petitioner does not identify any portion of the ’218 patent specification that describes corresponding structure for performing the claimed function of “poll[ing] the central controller to determine if an interruption of the communication is transient.” See Pet. 39. Accordingly, Petitioner has not identified sufficient corresponding structure for performing the function of this presumptive means-plus-function limitation.” slip op. at 22
Claim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,823,218 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.
RulingsInstitution decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37
- Other 314aDecided for petitioner
“B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40
§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Institution
Instituted IPR on claims 1–16 because Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–16 of the ’923 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995). One may show support for the claims of a later application by showing that a single, earlier application provides written description support for the claims. PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); Studiengesellschaft Kohle, MBH v. Shell Oil Co., 112 F.3d 1561, 1564 (Fed. Cir. 1997) (noting that a patentee “cannot distinct previous applications”). Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner
“Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“7. Analysis: Reasons to Combine the References Petitioner shows sufficiently that Yoakim, Jarisch and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/espresso machines.” Pet. 43. “Yoakim and Jarisch both improve the optimization of beverage parameters in a single-serve brewing system, and use optical codes read by the machine to achieve this.” Id. “Rapparini further improves the the wall of the capsule body like those used in Yoakim and Jarisch.” Id. at 43–44; see id. at 50–51, 53–54 (Petitioner’s further argument that Rapparini discloses “an optimized capsule structure that is stiffer and more stable” by virtue of radially spaced and vertically oriented ribs and grooves, where the vertically oriented grooves are free from extending entirely to the bottom region of the capsule). Petitioner directs us to additional evidence tending to establish that an ordinarily skilled artisan would have been prompted to modify Yoakim’s device, to include the code placement of Jarisch and the grooves and ribs of Rapparini, to arrive at the claimed invention with an expectation of success. Id. at 44–48.” slip op. at 27
§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites PhillipsPatents in suitUS 10,994,923 - PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther
“On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 10,689,740 - The Noco Company, Inc. v. Pilot, Inc.InstitutedPTAB · Feb 14, 2023 · IPR2022-01417 · APJ Jeffrey W Abraham · IPR · Institution
The Board instituted inter partes review of claims 1–27 on all asserted grounds, finding a reasonable likelihood that Nook-015 anticipates claims 1, 2, and 5–12.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine the information presented in the Petition establishes a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we institute an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“proceeding, we agree with Petitioner that the ’236 patent is not entitled to the 2014 priority date of the original application. Whether the Specification complies with the written description requirement calls for a comparison of the scope of the claim with the scope of the description to determine whether the inventor has demonstrated possession of the claimed invention. See Ariad, 598 F.3d 1336 at 1353; Power Oasis, 522 F.3d 1299, 1306. The independent claims of the ’236 patent each require (1) a load detection sensor “configured to detect presence of a vehicle battery” and (2) a reverse polarity sensor “configured to detect polarity of a vehicle battery.” Ex. 1001, 5:16–27 (claim 1), 6:7–22 (claim 13), 6:65–7:13 (claim 18), 8:1– 15 (claim 23). The Specification of the ’236 patent does not expressly disclose both a load detection sensor and reverse polarity sensor configured to perform the recited functions. Instead, the Specification identifies a single circuit, the “automatic detection module,” that “can automatically detect[] whether the load is detected” and “whether the electrode is connected with the automobile storage battery reversely.” Ex. 1001, 2:51–54. We are persuaded by Petitioner’s arguments that the disclosure of a single circuit capable of performing two functions does not demonstrate the inventors had possession of an invention that requires two separate sensors configured to perform separate functions as recited in the claims. See Ariad, 598 F.3d 1336 at 1352 (“[A] description that merely renders the invention obvious does not satisfy the [written description] requirement.”); Purdue Pharma L.P. v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (holding that “the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue,” but that “one skilled in the art, reading the original disclosure, must immediately discern the limitation at issue in the claims”); cf. PIN/NIP, Inc. v. Platte Chem. Co., 304 F.3d 1235, 1248 (Fed. Cir. 2002) (finding a claim for a method involving sequential application of two chemicals was invalid for lack of adequate written description where the specification indicated that the invention was a method of applying a “composition” containing the two chemicals). For all of the foregoing reasons, based on the present record, we agree with Petitioner that the Specification of the ’236 patent does not provide adequate written description support for distinct “load detection” and “reverse polarity” sensors, and, therefore, the challenged claims are not entitled to a priority date earlier than April 21, 2021, the filing date of the ʼ236 patent.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. Inc., v. Union Oil Co., 814 F.2d 628, 631 (Fed. Cir. 1987); see also Finisar Corp. v. DirecTV Group, Inc., 523 F.3d 1 US 9,007,015 B1, issued Apr. 14, 2015 (Ex. 1004). 2 US 9,245,888 B2, issued Jan. 26, 2016 (Ex. 1010). 3 US 10,60,024 B2, issued Mar. 31, 2020 (Ex. 1005). 1323, 1334 (Fed. Cir. 2008) (to anticipate a patent claim under 35 U.S.C. § 102, “a single prior art reference must expressly or inherently disclose each claim limitation”). Moreover, “[b]ecause the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). Whether a reference anticipates is assessed from the perspective of one of ordinary skill in the art. See Dayco Prods., Inc. v. Total Containment, Inc., 329 F.3d 1358, 1368 (Fed. Cir. 2003) (“‘[T]he dispositive question regarding anticipation [i]s whether one skilled in the art would reasonably understand or infer from the [prior art reference’s] teaching’ that every claim element was disclosed in that single reference.” (alterations in original) (quoting In re Baxter Travenol Labs., 952 F.2d 388, 390 (Fed. Cir. 1991))). Additionally, “[u]nder the principles of inherency, if the prior art necessarily functions in accordance with, or includes, the claimed limitations, it anticipates.” MEHL/Biophile Int’l Corp. v. Milgraum, 192 F.3d 1362, 1365 (Fed. Cir. 1999) (citation omitted); In re Cruciferous Sprout Litig., 301 F.3d 1343, 1349–50 (Fed. Cir. 2002). slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction In an inter partes review, we construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc). 37 C.F.R. § 42.100(b). Under Phillips, claim terms are afforded “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id.” slip op. at 10
Claim construction§ 102 anticipation§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,104,236 - PTAB · Aug 15, 2022 · IPR2022-00381 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR on claims 1–10 and 12–18 on all asserted grounds, finding a reasonable likelihood that the claims are unpatentable as obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. Accordingly, we institute an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“Having reviewed the disclosures of the ’626 provisional application relied upon by Patent Owner, we do not agree that they would convey to a person of ordinary skill in the art that Mr. Niester had possession of using 222 or 282 nm wavelengths to disinfect human or animal skin. While they refer to human activity such as travel, surgery, and food preparation, the disclosures do not refer to disinfecting skin. Rather, they refer to sterilizing things in the presence of humans, such as surfaces and air, but not human or animal skin itself. Therefore, we determine that Petitioner has satisfied its initial burden of production on the effective-filing-date issue by identifying the absence of specific supporting disclosure for claim 1 from the ’626 provisional application. See Dynamic Drinkware, LLC v. National Graphics, Inc., 800 F.3d 1375, 1379–1380 (Fed. Cir. 2015) (discussing burden framework in inter partes review). Based on this record, we find that Petitioner has demonstrated a reasonable likelihood that it will prevail in establishing that challenged claims 1–10 are not entitled to an effective filing date earlier than the filing date of the PCT application. The parties will have an opportunity to develop their positions on the issue of the effective filing date of claims 1–10 during trial.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Having considered the evidence and arguments presented by both parties on the present record, we are persuaded Petitioner sufficiently shows that Eckhardt and Sosnin teach or suggest all of the limitations in claim 1, and sufficiently explains how a person of ordinary skill in the art would have used Eckhardt’s teaching of narrow spectrum light in the range of 220 to 310 nm to disinfect skin, with Sosnin’s implementation of excimer lasers including 222 and 282 nm to kill bacteria, to arrive at the method of claim 1 with a reasonable expectation of success. We disagree with Patent Owner’s argument that Eckhardt teaches away from the use of UV light on skin because it is based on a mischaracterization of Eckhardt, which does not teach bandages as a way to provide cover from direct UV light, but rather, compensates for application of UV light through a bandage by controlling the UV light intensity. Indeed, Eckhardt’s embodiment that Petitioner relies upon is titled “UV- Transmissive Bandage” and explains how to choose bandage materials that transmit UV-C light. See Ex. 1004 ¶¶ 69–72. We also disagree, on this record, with Patent Owner’s argument that Sosnin would dissuade a person of ordinary skill from using 222 or 282 nm wavelengths to disinfect skin . Although Patent Owner is correct that Sosnin refers to the need for additional testing before using its technology outside of a laboratory (Prelim. Resp. 31), Mr. Lawal directs us to evidence supporting his testimony that it was general knowledge in the art at the time of the invention that even though UV light poses safety risks to human skin, UV-C light of 222 nm on bare skin for disinfection was relatively safe. Ex. 1003 ¶¶ 88–91 (citing Exs. 1013, 1015, 1016, 1017). Patent Owner presents only attorney argument in response to Mr. Lawal’s testimony and supporting evidence. We invite the parties to continue to develop this issue during trial.” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We disagree with Patent Owner’s argument that Eckhardt teaches away from the use of UV light on skin because it is based on a mischaracterization of Eckhardt, which does not teach bandages as a way to provide cover from direct UV light, but rather, compensates for application of UV light through a bandage by controlling the UV light intensity. Indeed, Eckhardt’s embodiment that Petitioner relies upon is titled “UV- Transmissive Bandage” and explains how to choose bandage materials that transmit UV-C light. See Ex. 1004 ¶¶ 69–72. We also disagree, on this record, with Patent Owner’s argument that Sosnin would dissuade a person of ordinary skill from using 222 or 282 nm wavelengths to disinfect skin . Although Patent Owner is correct that Sosnin refers to the need for additional testing before using its technology outside of a laboratory (Prelim. Resp. 31), Mr. Lawal directs us to evidence supporting his testimony that it was general knowledge in the art at the time of the invention that even though UV light poses safety risks to human skin, UV-C light of 222 nm on bare skin for disinfection was relatively safe. Ex. 1003 ¶¶ 88–91 (citing Exs. 1013, 1015, 1016, 1017). Patent Owner presents only attorney argument in response to Mr. Lawal’s testimony and supporting evidence. We invite the parties to continue to develop this issue during trial.” slip op. at 17
§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 9,700,642
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.