- Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Aug 18, 2026 · IPR2025-00339 · APJ Kristen L Droesch · IPR · Final written decision
Claims 22, 23, 28, and 30 are unpatentable over Choi, Labaziewicz, and Yu; claims 1–3, 10–12, 24, 25, 32, and 33 were not shown unpatentable.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningOther
“We decline Patent Owner’s invitation to construe “during a frame” of “independently controlling simultaneous data acquisition with each of the first and second channels during a frame” by importing the extraneous limitations “at some point between the beginning and the end of the exposure interval during which the image sensors capture a single image.” As pointed out by Petitioner, Patent Owner’s proposed construction is unsupported by the language of claim 22 and the ’180 Specification because Specification does not disclose an exposure interval nor suggest “during a frame” is limited to an exposure interval. Patent Owner and its expert Dr. Saber cite only extrinsic evidence (Exs. 2006, 2009) to support its argument that claim 22 should be limited to an “exposure interval during which the image sensors capture a single image.” See PO Resp. 16–17; Ex. 2020 ¶ 64. Similarly, Patent Owner relies only on extrinsic evidence (e.g., Ex. 2011, 1; Ex. 2022, 1; Ex. 2020 ¶ 66) to limit “during” to “at some point between the beginning and the end.” See id. at 18. When considered in the context of claim 22 and the ’180 Patent Specification which do not limit “during a frame” to an exposure interval, we find that we cannot rely on Patent Owner’s citations to extrinsic evidence to yield a reliable construction for “during a frame.” As demonstrated in the analysis below, we need not provide an explicit construction for “during a frame” to resolve the parties’ disputes regarding the merits of the patentability challenges. See Realtime, 912 F.3d at 1375. We apply the ordinary and customary meaning for “during a frame.” To the extent that an explicit identification of the ordinary and customary meaning may aid the understanding of our analysis, consistent with the language of claim 22 and the ’180 Patent Specification, we find that the ordinary and customary meaning for “during a frame” is “during the period of time that data for an image frame is acquired.” See Ex. 1001, code (57), 20:6–24, 25:23–35.” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2-3 years of experience in digital imaging systems,” and that “[l]ess experience may be necessary with additional education, and likewise, less education may be necessary with additional work experience.” Pet. 6 (citing Ex. 1003 ¶¶ 16–19). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’180 Patent Specification and the prior art of record.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Owner to show that Labaziewicz is not prior art because the ’180 Patent is entitled to the earliest August 25, 2004, filing date of the ’854 Provisional Application. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). Patent Owner’s arguments fail to meet this burden of production because, aside from addressing deficiencies of written description support the ’854 Provisional Application provides written description support for all of the limitations of the claimed invention. See PO Resp. 60–64; PO Sur-reply 25–28. Specifically, Patent Owner does not address written description support in the ’854 Provisional Application for “independently controlling simultaneous data acquisition with each of the first and second channels during a frame”––limitation [22.3]––the heart of the parties’ claim construction disputes addressed above in Section II.A. See PO Resp. 60–64; PO Sur-reply 25–27. Accordingly, Patent Owner has not met its burden of production in coming forward with evidence or argument to show possession of the claimed invention in the ’854 Provisional Application. As a result, the burden of production does not shift back to Petitioner, and, therefore, the ’180 Patent is not entitled to the benefit of the August 25, 2004, filing date of the ’854 Provisional Application.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Petitioner does not present arguments that it would have been obvious to a person of ordinary skill in the art at the time of the invention to modify the teachings of Matsushima to acquire data for images 62A and 62B at the argues that Matsushima renders obvious this limitation. See id. at 21, 23, 30; PO Resp. 33–34 (“[T]he Petition provides no further explanation why Matsushima renders this limitation obvious.”). In the Reply for the first time, Petitioner asserts that “a POSITA would understand that Matsushima’s disclosure, including its multi-channel architecture, synchronous control of channels, and capturing two images that are scaled versions of the same scene, renders obvious simultaneous acquisition during a frame. Pet. Reply 13 (citing Ex. 1069 ¶ 49). We do not consider Petitioner’s belated argument because it exceeds the proper scope of a reply. A reply may only respond to arguments raised in the corresponding patent owner response. See 37 C.F.R. § 42.23. As explained in the Trial Practice Guide, “respond” “does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Trial Practice Guide at II.I. (December 2025)(citing 37 C.F.R. § 42.23).10 A reply that raises a new issue or belatedly presents evidence may not be considered. See id. For example, a “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Id.” slip op. at 32
Patent outcomesUS 7,916,180 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,916,180 - Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Jul 21, 2026 · IPR2025-00339 · APJ Kristen L Droesch · IPR · Final written decision
Claims 22, 23, 28, 30, and 33 are unpatentable over Choi, Labaziewicz, and Yu under § 103; claims 1–3, 10–12, 24, 25, and 32 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2-3 years of experience in digital imaging systems,” and that “[l]ess experience may be necessary with additional education, and likewise, less education may be necessary with additional work experience.” Pet. 6 (citing Ex. 1003 ¶¶ 16–19). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’180 Patent Specification and the prior art of record.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Owner to show that Labaziewicz is not prior art because the ’180 Patent is entitled to the earliest August 25, 2004, filing date of the ’854 Provisional Application. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”).” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“We do not agree with Petitioner’s arguments based on retrieval of data from CCD 18A and CCD 18B. Although Matsushima’s CCD drive circuits 20A and 20B are driven synchronously by timing generator 28 (see Ex. 1007 ¶ 27), Matsushima discloses that “accumulated signal charges are retrieved by CCD drive pulses applied by CCD drive circuits 20A and 20B, and are sequentially output from CCD 18A and CCD 18B as voltage signals (analog image signals) corresponding to each signal charge” (see Ex. 1007 ¶ 23) (emphasis added). In other words, regardless of whether CCD drive circuits 20A and 20B are driven synchronously by timing generator 28, Matsushima discloses that voltage signals corresponding to the accumulated 8 Petitioner’s citation erroneously includes ¶¶ 34–36 of Exhibit 1069. CCD 18A and CCD 18B sequentially––not output at the same time or simultaneously.” slip op. at 30
- Strike new argumentNew argument disregardedDecided for patent owner
“argues that Matsushima renders obvious this limitation. See id. at 21, 23, 30; PO Resp. 33–34 (“[T]he Petition provides no further explanation why Matsushima renders this limitation obvious.”). In the Reply for the first time, Petitioner asserts that “a POSITA would understand that Matsushima’s disclosure, including its multi-channel architecture, synchronous control of channels, and capturing two images that are scaled versions of the same scene, renders obvious simultaneous acquisition during a frame. Pet. Reply 13 (citing Ex. 1069 ¶ 49). We do not consider Petitioner’s belated argument because it exceeds the proper scope of a reply. A reply may only respond to arguments raised in the corresponding patent owner response. See 37 C.F.R. § 42.23. As explained in the Trial Practice Guide, “respond” “does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Trial Practice Guide at II.I. (December 2025)(citing 37 C.F.R. § 42.23).9 A reply that raises a new issue or belatedly presents evidence may not be considered. See id. For example, a “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Id. Petitioner clarifies that the Petition does not argue inherency. See Pet.” slip op. at 33
Patent outcomesUS 7,916,180 mixed§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,916,180 - Therabody, Inc. v. Datafeel Inc.Institution deniedPTAB · Aug 21, 2025 · PGR2025-00026 · APJ Lisa L Tsang · PGR · Institution
The Board denied institution because Petitioner did not show claim 4 more likely than not unpatentable on either obviousness or § 112 ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 324(a), a post-grant review may be instituted only if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). Upon considering the arguments and evidence, we conclude that the information presented shows it is not more likely than not that at least one challenged claim of the ’174 patent is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt the level of ordinary skill in the art articulated by Petitioner because, based on the current record, it is consistent with our review and understanding of the technology and descriptions in the ’174 patent and prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that our analysis below would be the same regardless of whether we adopt Petitioner’s or Patent Owner’s proffered level of skill in the art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner and Patent Owner agree that no claim terms need construction. Pet. 14; Prelim. Resp. 6. After reviewing the evidence and arguments presented by the parties, we determine that it is not necessary to expressly construe any claim terms because doing so would not change the outcome of our analysis below. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not reached
“of Choi to support its argument that an ordinarily skilled artisan would have understood Choi’s infrared lamp housing to define a concave shape as claimed. See Pet. 61–62. With only this explanation and evidence from Petitioner and Dr. Jenson, however, we cannot not discern how these portions of Choi would have so apprised an ordinarily skilled artisan. For example, the side view of the infrared lamp housing, illustrated in Figure 5 reproduced below, shows the housing having a convex, rather than concave, shape. See Ex. 1008, Fig. 5. Furthermore, paragraphs 20 and 48 refer to the housing’s “circular” shape and outer periphery and also “tubular” shape. See id. ¶¶ 20, 48. But these descriptions, either alone or together with Figure 5, also do not support adequately a finding that Choi’s housing is concave. Choi’s teachings in paragraphs 20 and 46 regarding the lamp housing guiding or directing infrared light from the lamp to irradiate the skin of a user, without more, are similarly deficient. See id. ¶¶ 20, 46. And although Dr. Jensen appears to equate “concave” with “inner circular,” he does not provide the basis for his testimony or explain what “inner circular” means, particularly in the context of distinguishing a convex shape from a concave shape. See Ex. 1002 ¶ 197. Accordingly, we determine there is insufficient evidence to support Petitioner’s conclusory statements that an ordinarily skilled artisan would have understood Choi’s infrared lamp housing to define a concave shape as claimed.” slip op. at 23
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 12,036,174 - Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - Catalyst Orthoscience Inc. v. Shoulder Innovations, Inc.Institution deniedPTAB · Dec 19, 2024 · PGR2024-00042 · APJ Lisa L Tsang · PGR · Institution
The Board denied institution of PGR challenging claims 1–16, finding the first five Fintiv factors favored denial and the petition did not present compelling merits.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“during the conference and in the Minute Entry, and in the court’s subsequent Order Regarding Schedule. We also note that the evidence shows the district court may intend to reschedule the trial to a date substantially earlier than March 9, 2026. See Ex. 2010, 5; Ex. 1029, 10−11. However, given that the Order does not unambiguously set a trial date for December 1, 2025, or even sometime in December 2025 or January 2026 (see Ex. 1028), we decline to speculate as to what date the court may ultimately select for trial. Moreover, the record shows that Petitioner has consistently opposed moving the trial to a date earlier than March 9, 2026. See Ex. 2010, 5; Ex. 1026, 2−4; Ex. 1029, 11. We view Petitioner’s opposition as creating yet more ambiguity as to the trial date in the co-pending litigation. Therefore, we find that factor 2 is neutral because the exact trial date in district court is uncertain.” slip op. at 14
- BurdenNot reached
“if unrebutted in trial, would plainly lead to a conclusion that one or more claims are unpatentable by a preponderance of the evidence.” Guidance Memo 4. This standard is only met “if it is highly likely that the petitioner would prevail with respect to at least one challenged claim.” OpenSky Indus., LLC v. VLSI Tech. LLC, IPR2021-01064, Paper 102 at 49 (Vidal Oct. 4, 2022) (precedential) (citing Guidance Memo 4). We have reviewed Petitioner’s challenges and Patent Owner’s arguments. For the reasons explained below, we determine that Petitioner’s challenges have not risen to the threshold of compelling merits. Before addressing the parties’ arguments regarding the asserted grounds, we address: (a) the level of ordinary skill in the art, (b) claim construction, and (c) relevant principles of law; and we provide (d) overviews of the asserted art.” slip op. at 18
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that its proffered additional level of ordinary skill in the art appears consistent with the experience Petitioner describes. See Pet. 16. For purposes of this Decision, we adopt the level of ordinary skill in the art articulated by Petitioner and supplemented by Patent Owner, because, based on the current record, it is consistent with our review and understanding of the technology and descriptions in the ’561 patent and prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that the open-ended language “at least” expands the range of education and experience indefinitely with no upper bound. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 19
- Expert testimonyPetitioner expert creditedDecided for petitioner
“In this regard, Mr. Fallin testifies that I have decades of experience working directly with joint replacement systems, including hip joint replacement systems, knee replacement systems, and facet joint replacement systems. My work on these joint replacement systems included my direct engagement or supervision of and professionals in the inventing, designing, fabricating, testing, obtaining regulatory approvals, ensuring regulatory compliance, commercializing, and patenting of these systems. Ex. 1002 ¶ 10. Mr. Fallin also testifies that his experience “includes working directly with supervising professionals whose responsibilities included designing, developing, and commercializing joint replacement systems and similar device[s].” Id. ¶ 67 As such, Mr. Fallin identifies “decades” of experience with joint replacement systems. Ex. 1002 ¶ 10. Moreover, Patent Owner does not persuasively explain why Mr. Fallin’s “direct engagement” and “working directly with,” as well as “supervision” of, other individuals designing joint replacement systems, does not at least imply personal design experience. See Prelim. Resp. 10–11. Therefore, we determine that the current record reflects that Mr. Fallin is qualified to testify as to the knowledge of a person of ordinary skill in the art.” slip op. at 20
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham · NautilusPatents in suitUS 11,771,561 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - PTAB · Aug 16, 2024 · IPR2023-00658 · APJ Scott A Daniels · IPR · Final written decision
The Board canceled original claim 1, denied the proposed substitute claim as indefinite under § 112, and did not reach the asserted obviousness grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We have, on the complete record now before us, mainly the testimony of Petitioner’s declarant, Mr. Hatch, who testifies that the designer of ordinary skill in the art would be a person who has a bachelor’s degree in furniture design or an equivalent field or alternatively two years of practical experience designing furniture . . . [which] is appropriate given the relatively simple nature of the design at issue, which involves little more than two boards forming a tabletop. Ex. 1002 ¶¶ 34–35. Based on the complete record, we adopt Petitioner’s articulation of a designer of ordinary skill as it is supported by the testimony of Mr. Hatch. Id. ¶¶ 33–38. We also note that, based on the complete trial record, our” slip op. at 18
- Expert testimonyPetitioner expert creditedDecided for petitioner
“In contrast, Patent Owner’s declarant, Mr. Williams, testifies based on his “experience[,] that tenons are generally included in the larger portion of two table top portions.” Ex. 2006 ¶ 55. However, Mr. Williams’ experience does not explain why an ordinary observer would understand such functional and ornamental characteristics of tenon and hole arrangements. Id. Nor does this testimony proclaim that tenons must be in the larger of two table top potions. Indeed, even considering an ordinary observer imbued with Mr. Williams’ level of expertise and experience, and understanding for instance that it may be more likely that the wider portion includes tenons, this does not resolve the glaring inconsistency that Figure 1 illustrates holes and Figure 8 illustrates tenons. In other words, Mr. Williams’ “experience” does not resolve the visible tension that, on one hand, Figure 1 illustrates holes as part of the claimed ornamental design in the wider portion of the table top, and on the other hand, Figure 8 illustrates tenons as part of the same wider portion of the table top. The problem here may be more eloquently explained as “Two roads diverged in a yellow wood[,] And sorry I could not travel both.” Robert Frost, The Road Not Taken, The Poetry of Robert Frost—The Collected Poems, 105, Henry Holt and Co. (1969). Considering the entire record before us in this case we credit Mr. Hatch’s testimony. The issue is not, as Patent Owner has framed it, whether “[o]ne of ordinary skill in the art would understand how the tenons and holes should be positioned on each of the table top portions.” Reply Opp. 7. The question is whether a person of ordinary skill in the art viewing the design for a table top in the proposed substitute claim as would an ordinary observer, understand whether or not the wider portion of the table top as Figures 1 and 6, holes. As Mr. Hatch persuasively explains, in the proposed substitute claim a majority of the drawings for the wider portion, i.e., Figures 1–6, omit the tenons added in Figure 8. Ex. 1011 ¶ 37 (Mr. Hatch testifying that “Figure 8 is the only amended figure that adds tenons/dowels.”) Indeed, Figures 1 and 6 not only fail to illustrate tenons, but actually are amended to include holes rather than tenons, as described in the Motion to Amend. See, e.g., Motion to Amend 6 (Patent Owner describing, “Figure 1: Removal of disclaimer of a total of four holes by amending the outline of the four holes from broken lines to solid lines.”). On the complete record in this proceeding, we determine that a” slip op. at 28
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“On the complete record in this proceeding, we determine that a designer of skill in the art considering the claim from either their own, or the perspective of an ordinary observer, would be uncertain whether the wider portion of the claimed table top depicted in Figures 1–8 includes tenons, or holes. It is reasonable that anyone observing two distinct ornamental designs for the same wider portion of the table top would be unclear as to the claimed ornamental design where holes are shown in one figure but tenons are shown in another figure illustrating the same wider portion of the table top. Observing as a whole, the figures illustrating the table top in the proposed substitute claim, the question remains, does the wider portion of the table top include tenons, or holes? See Maatita, 900 F.3d at 1376 (“Ultimately, a patent is indefinite for § 112 purposes whenever its claim, read in light of the visual disclosure (whether it be a single drawing or multiple drawings), ‘fail[s] to inform, with reasonable certainty, those skilled in the art about the scope of the invention.’”) (quoting Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898 (2014)). proposed substitute claim fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” See Nautilus, 572 U.S. at 910. Thus, Petitioner has shown, by a preponderance of the evidence, that the proposed substitute claim is indefinite and we accordingly deny Patent Owner’s Noncontingent Motion to Amend.” slip op. at 29
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteUnpatentable
“Federal Circuit recently explained that “a design patent is indefinite under § 112 if one skilled in the art, viewing the design as would an ordinary observer, would not understand the scope of the design with reasonable certainty based on the claim and visual disclosure.” In re Maatita, 900 F.3d 1369, 1377 (Fed. Cir. 2018). In Maatita, the Federal Circuit reversed the Board’s finding of indefiniteness of a design for a shoe bottom, i.e., a shoe sole, finding that Maatita’s two-dimensional drawing clearly demonstrates the perspective from which the shoe bottom should be viewed. A potential infringer is not left in doubt as to how to determine infringement. In this case, Maatita’s decision not to disclose all possible depth choices would not preclude an ordinary observer from understanding the claimed design, since the design is capable of being understood from the two-dimensional, plan- or planar-view perspective [] shown in the drawing. Id. at F.3d 1378–79. Different from Maatita, the issue in this proceeding is not whether an ordinary observer would sufficiently understand a three-dimensional ornamental design from a two-dimensional figure, but whether inconsistencies between figures of the proposed substitute claim render the scope of the claimed table top uncertain. See Maatita, 900 F.3d at 1376 (The Federal Circuit specifically distinguishing Maatita’s single two-dimensional drawing from indefiniteness issues raised by inconsistent drawings: “[h]ere, we are not dealing with inconsistencies in the drawings, or inconsistencies between the drawings and the verbal description, but” slip op. at 24
§ 103 obviousness§ 112 disclosurecites Nautilus - PTAB · Apr 10, 2024 · PGR2024-00004 · APJ Scott A Daniels · PGR · Institution
The Board instituted PGR on claims 1–24 and all petition grounds, finding it more likely than not that claims 1–3, 5–6, 8–11, 13–17, and 20–24 are obvious over Emma, Butt, and Smith.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 324(c) (2018); 37 C.F.R. § 42.4(a) (2023). A post-grant review may be instituted only if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine, for the reasons set forth below, that Petitioner has demonstrated that it is more likely than not that at least one of the challenged claims is unpatentable based on the grounds presented. Therefore, we institute a post-grant review of the challenged claims.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had at least a bachelor’s degree in electrical engineering or computer engineering . . . [a]lternatively, a POSITA could have had a bachelor’s degree in mechanical engineering, industrial engineering, physics, or a related engineering or discipline, plus at least two years of experience working with control circuits, sensors, kitchen appliances, or similar fields. ordinary skill in the art and states that “[t]he differences do not matter for purposes of this Petition.” Prelim. Resp. 4–5. On this record, Petitioner’s proposed level of ordinary skill in the art is consistent with our review and understanding of the technology and descriptions in the ’746 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“level of smoke” Neither Patent Owner nor Petitioner expressly indicate that any claim terms require express construction. See Petition 13–14; Prelim. Resp 5. However, Petitioner contends that for the phrase “level of smoke,” recited in claims 1, 15, and 22, “Patent Owner interprets ‘level of smoke’ as merely detecting smoke.” Pet. 14 (citing Ex. 1009, 6). Patent Owner argues that it “does not offer a special definition” and “asked the [district] court to give these terms their plain and ordinary meaning.” Prelim. Resp. 5, n 2. Patent Owner explains that a person of ordinary skill in the art “would similarly understand ‘level of smoke’ when read in the full context of the intrinsic record.” Id. in light of the specification, we understand “level of smoke” as a predetermined level of smoke “indicative of a dangerous condition” as the specification of the ’746 patent explains. Ex. 1001, 15:43–44, see also id. at 15:63–65 (The ’746 patent describing “[t]he determination of a level of smoke corresponding to a dangerous condition.”). To the extent the parties disagree, they may address this issue more directly in subsequent briefing. slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“POSITA to reasonably combine Emma with a smoke sensor reference.” Prelim. Resp. 44. We agree that Emma does not disclose a smoke sensor, but Petitioner has provided other prior art references, namely Butt and Smith, and presented several reasons, namely safety reasons, that a person of ordinary skill in the art would consider adding a smoke detector from Butt and Smith to Emma’s microwave oven. Pet. 24, 74–75. Obviousness is not determined from the perspective of the inventors or authors of a single prior art reference. Rather, obviousness is determined from the perspective of a hypothetical person having ordinary skill in the art. It is only that hypothetical person who is presumed to be aware of all pertinent prior art. Standard Oil Co. v. American Cyanamid Co., 774 F.2d 448, 454 (Fed. Cir. 1985). Petitioner argues, for instance, that Butt teaches the fire safety aspects of “a controller for interrupting a supply of electricity to an appliance upon detection of a trigger, such as [s]moke.” Pet. 24 (quoting Ex. 1015, 1:16– 18). Dr. Horenstein testifies that from a safety perspective, a person of ordinary skill in the art would have “combine[d] the additional kitchen-safety appliance features of Butt with the Emma microwave/refrigerator so as to enable the Emma microwave to shut down upon the detection of smoke, and to reenable the Emma microwave for a further cooking session when the smoke had cleared.” Ex. 1023 ¶ 124. Where Butt arguably discloses a smoke detector external to an appliance, Dr. Horenstein testifies that a person of ordinary skill in the art would have looked to “Smith to include the smoke sensor in operative connection with the microwave oven with the reset functionality disclosed by Butt for the added benefit of reusing the microwave oven.” Id. ¶ 127 (emphasis added). each directed towards shutting down a component of the device in response to a sensor output indicative of an unwanted condition.” Id. ¶ 127. Dr. Horenstein testifies further that a person of ordinary skill in the art “would have combined the elements as disclosed by known methods for the purposes of modifying Emma’s microwave / refrigerator combination to include Smith’s smoke sensor to be operatively connected with its cooking area and to include Butt’s smoke sensor and reset functionality.” Id. ¶ 126. Dr. Horenstein explains that inclusion of Butt’s reset functionality with Smith’s smoke sensor operatively connected with the cooking area into Emma would result in such elements merely performing the same function as they do separately, i.e., sensing smoke to withdraw electrical power from an electrical cooking appliance and then re-enabling the electrical cooking appliance. Id. Moreover, Dr. Horenstein testifies that the prior art, for example, Butt, specifically recognized the need to solve the problem of fires in the home started by cooking appliances. Id. ¶ 128 (citing Ex. 1015, 1:22–44). Butt explains, that “[h]ome fires are a serious problem in the United States. The National Fire Protection Association reports that between the years 1999- 2002, for example, there were 114,000 reported home fires associated with cooking alone.” Ex. 1015, 122–25. Similarly, Smith expressly teaches “[a] method and apparatus for anticipating the occurrence of a fire in the cooking cavity of a microwave oven.” Ex. 1014, Abstract.” slip op. at 36
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 11,674,746 - PTAB · Apr 10, 2024 · PGR2024-00003 · APJ Scott A Daniels · PGR · Institution
Instituted PGR on claims 1–28 and all petition grounds; the Board found a reasonable likelihood that claims 1, 13, 15, 20, 22, and 24–25 are obvious over Emma, Butt, and Smith.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 324(c) (2018); 37 C.F.R. § 42.4(a) (2023). A post-grant review may be instituted only if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine, for the reasons set forth below, that Petitioner has demonstrated that it is more likely than not that at least one of the challenged claims is unpatentable based on the grounds presented. Therefore, we institute a post-grant review of the challenged claims.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had at least a bachelor’s degree in electrical engineering or computer engineering . . . [a]lternatively, a POSITA could have had a bachelor’s degree in mechanical engineering, industrial engineering, physics, or a related engineering or discipline, plus at least two years of experience working with control circuits, sensors, kitchen appliances, or similar fields. Pet. 14 (citing Ex. 1002 ¶ 50; Ex. 1023 ¶ 6). Patent Owner provides a similar level of ordinary skill in the art and states that “[t]he differences do not matter for purposes of this Petition.” Prelim. Resp. 4. On this record, Petitioner’s proposed level of ordinary skill in the art is consistent with our review and understanding of the technology and descriptions in the ’745 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningOther
“level of smoke” Neither Patent Owner nor Petitioner indicate that any claim terms require express construction. See Petition 13–14; Prelim. Resp 5. However, Petitioner contends that for the phrases “level of smoke” and “amount of smoke,” recited in claims 1, 15, and 24, it has “applie[d] what it understands Patent Owner contends is the meaning of this term in this Petition[,] and shows below the claims are invalid under Patent Owner’s construction.” Pet. 13–14 (citing Ex. 1009, 6). Patent Owner argues that it has “does not offer a special definition” and “asked the [district] court to give these terms their plain and ordinary meaning.” Prelim. Resp. 5, n 2. Patent Owner explains that a person of ordinary skill in the art “would similarly understand ‘level of smoke’ when read in the full context of the intrinsic record.” Id. For purposes of this Decision, reading the plain language of the claims in light of the specification, we understand “level of smoke,” or amount of smoke, in the claims generally as a predetermined level of smoke “indicative of a dangerous condition” as the specification of the ’745 patent explains. Ex. 1001, 15:48–49, see also id. at 16:1–2 (The ’745 patent describing “[t]he determination of a level of smoke corresponding to a dangerous condition.”). To the extent the parties disagree, they may expressly address this issue more directly in subsequent briefing. slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“from Butt and Smith to Emma’s microwave oven. Pet. 24. Obviousness is not determined from the perspective of the inventors or authors of a single prior art reference. Rather, obviousness is determined from the perspective of a hypothetical person having ordinary skill in the art. It is only that hypothetical person who is presumed to be aware of all pertinent prior art. Standard Oil Co. v. American Cyanamid Co., 774 F.2d 448, 454 (Fed. Cir. 1985). Petitioner argues, for instance, that Butt teaches the fire safety aspects of “a controller for interrupting a supply of electricity to an appliance upon detection of a trigger, such as [s]moke.” Pet. 24 (quoting Ex. 1015,1:16– 18). Dr. Horenstein testifies that from a safety perspective, a person of ordinary skill in the art would have “combine[d] the additional kitchen-safety appliance features of Butt with the Emma microwave/refrigerator so as to enable the Emma microwave to shut down upon the detection of smoke, and to reenable the Emma microwave for a further cooking session when the smoke had cleared.” Ex. 1023 ¶ 124. Where Butt arguably discloses a smoke detector external to an appliance, Dr. Horenstein testifies that a person of ordinary skill in the art would have looked to “Smith to include the smoke sensor in operative connection with the microwave oven with the reset functionality disclosed by Butt for the added benefit of reusing the microwave oven.” Id. ¶ 127 (emphasis added).” slip op. at 38
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 11,674,745
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.