- Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision
Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther
“Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13
- Expert testimonyPatent owner expert discountedMixed
“As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32
Patent outcomesUS 10,583,449 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 10,583,449 - Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision
Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9
- Expert testimonyPetitioner expert creditedDecided for patent owner
“The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10
Patent outcomesUS 9,527,094 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 9,527,094 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Maplebear Inc. D/B/A Instacart v. Consumeron, LLCAll claims unpatentablePTAB · Nov 20, 2024 · IPR2023-00865 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–19 are unpatentable under § 103 over Carr and Lauka, with additional references for the dependent-claim grounds, because the challenged claims lack priority support in the ’848 application.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Instacart submits that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of electronic commerce” and that “[l]ack of work experience can be remedied by additional education, and vice versa.” Pet. 27 (citing Ex. 1003 ¶¶ 22–25). Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” PO Resp. 7 (citing Ex. 2016 ¶¶ 19–23). But, as Consumeron’s expert acknowledges, Consumeron’s proposed definition “is not materially different” from Instacart’s. See Ex. 2016 ¶ 22. Accordingly, while we adopt the level of skill in the art as defined by Instacart our findings and analysis would be the same under Consumeron’s proposal.” slip op. at 7
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“8 Consumeron argues Dr. Houh’s testimony should be given little weight because he “admitted he did not evaluate what the ’848 Application reasonably conveys to a skilled artisan.” Resp. 26 (citing Ex. 2011, 74:8– 76:6, 83:4–84:1, 92:22–95:5). We disagree. Dr. Houh’s testimony indicates that he properly considered what the ’848 application reasonably conveys to a POSITA. See Ex. 1003 ¶¶ 52, 56, 58, 61, 65. The portions of his cross-examination testimony cited by Consumeron do not suggest otherwise. For the reasons explained below, we credit Dr. Houh’s testimony over the competing interpretations offered by Consumeron and Dr. Mitzenmacher. 9 The dissent criticizes the majority’s analysis as “overly narrow” and too focused on the preferred embodiment. See Dissent 7–8. We disagree. Our analysis considers the entirety of the ’848 application, including all of the passages cited by Consumeron and the dissent.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“But it does not follow that an agent encountering a stock-out would necessarily respond according to the specific steps recited in claims 1 and 14.10 For example, instead of sending information about a replacement product, the agent could travel to another location to look for the same product, or notify the customer that the desired product could not be found and terminate the transaction. Because the ’848 application only contemplates scenarios where a product can be located, it does not describe the agent’s response in the event the identified product cannot be located or is unavailable, much less reasonably convey possession of a method comprising the specific, responsive steps in claims 1 and 14.11” slip op. at 17
- Prior constructionPrior construction adoptedTerm construed petitioner constructionDecided for petitioner
“construed the terms “acquisition request” and “acquiring” in our final written decision in the related 1357 IPR to encompass “not only a request for a delivery agent to shop for and purchase goods, but also a request for the agent to pick up or obtain pre-paid goods.” See 1357 IPR, Paper 35 at 11. It is undisputed that the ’465 patent at issue here and the ’835 patent at issue in the 1357 IPR are related and share essentially identical specifications, figures, and claim terms. See Pet. Reply 16; PO Resp. 38 n.6. Thus, for the same reasons as in our final written decision in the related 1357 IPR, we likewise determine here that Instacart’s construction of “acquisition request” is the correct one. See SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents ‘derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.’” (quoting NTP, Inc., v. Research in Motion, Ltd., 418 F.3d 1282, 1293 (Fed. Cir. 2005)). Consumeron provides no persuasive justification for us to depart from our prior reasoning in the related 1357 IPR.” slip op. at 23
Patent outcomesUS 11,238,465 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 11,238,465 - Fluidmaster, Inc. v. Danco, Inc.InstitutedPTAB · Sep 9, 2024 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Institution
Instituted IPR of claims 1–20 on all asserted grounds; the Board found a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’993 patent. Accordingly, we institute an inter partes review of claims 1–20 of the ’993 patent on the grounds asserted in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“presented to the Office.” Prelim. Resp. 31– 36. In determining whether to deny institution under § 325(d) we use a two-part framework, as follows: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 at 17–18 (PTAB Dec. 15, 2017) (precedential as to § III.C.5, first paragraph)).” slip op. at 8
- BurdenDecided for petitioner
“At this stage of the proceeding, Patent Owner provides no sufficient evidence to rebut Dr. Cameron’s testimony as to what a POSITA would have known from Guoxin and Ho’s drawings and as to the alleged motivations to combine Guoxin and Ho. Based on Petitioner’s evidence and analysis, and taking into account the Preliminary Response, at this stage of the proceeding, we determine that the information in the Petition shows a reasonable likelihood that claim 1 is unpatentable over Guoxin and Ho.” slip op. at 24
- Skill levelSkill level patent owner adoptedDecided for patent owner
“A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’993 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. Prelim. Resp. 16. Petitioner’s declarant Dr. Cameron asserts that: A [POSITA] with respect to the subject matter of the ’993 patent at the time of the priority date, January 27, 2014, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. Ex. 1004 ¶ 29. For purposes of this Decision, we adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’993 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Dr. Cameron.” slip op. at 12
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Fluidmaster, Inc. v. Danco, Inc.InstitutedPTAB · Sep 9, 2024 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Institution
The Board instituted IPR of claims 1–24 on all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’105 patent. Accordingly, we institute an inter partes review of claims 1–24 of the ’105 patent on the grounds asserted in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“Previously presented art includes art made of record by the Examiner, and art provided to the Office by an applicant, such as on an Information Disclosure Statement (“IDS”), in the prosecution history of the challenged patent. Id. at 7–8. Here, it is not disputed that Brown and Bjerke were listed on an IDS and, thus, were previously presented to the Office. Pet. 12, n.4; Prelim. Resp. 33. It is also not disputed that Guoxin, Ho, Calmettes, Hall, Kimber, and Schuster were not previously presented to the Office. See Prelim. Resp. 33. Patent Owner argues that Guoxin, Brown, and Ho are cumulative of a reference, DeMarco9, that was previously presented to the Office and relied upon to reject the claims. Prelim. Resp. 33 Patent Owner argues that Guoxin, Brown, and Ho are cumulative to DeMarco because all of the “references are completely silent as to whether the purported ‘extended portion’ is integrally molded with the purported body of the toiled fill valve.” Id. at 33–36. Patent Owner’s arguments are unpersuasive. As can be seen from our discussion of Ho in our analysis below, on this record, we are persuaded that Petitioner has sufficiently shown for purposes of institution how Ho allegedly teaches the claimed integrally molded extended portion. We, thus, are not persuaded that at least Ho is cumulative of DeMarco. Grounds 1–4 rely upon combinations of prior art that include Ho. Ground 5 is based upon Schuster, which was not previously presented to the 9 U.S. Patent No. 5,708,991 (Ex. 1024). Office. Accordingly, we determine that discretionary denial is not warranted. Because we determine that part one of the framework is not satisfied, we need not turn to part two to determine whether Petitioner demonstrates that the Office erred in a manner material to the patentability of the challenged claims. For the reasons discussed above, we decline to exercise our discretion under § 325(d) to deny the Petition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“On this record, we are persuaded by Patent Owner that the claim phrase “integrally molded with” should be construed to mean “molded together as a single structure” and to exclude items created as separate pieces and attached together later. Patent Owner’s construction is consistent with the plain language of the claims, which requires the extended portion be “integrally molded with” the body and not just the extended portion be integral with the body. Further, we determine that Patent Owner’s construction is consistent with the ’105 patent, which discloses that “the bowl fill valve 109 may be molded as a portion of the toilet fill valve 100 or it may be snapped or clamped into place, or it may be attached to the toilet fill valve 100 in some other manner, etc.” Id. at 2:23–26 (emphasis added). At this stage of the proceeding, we construe “integrally molded with” to mean molded together as a single structure.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner next disputes that a POSITA would have combined Guoxin and Ho and argues that Petitioner’s alleged rationale to combine Guoxin and Ho as conclusory and lacks sufficient support. Prelim. Resp. 40–42. We determine that Petitioner has sufficiently articulated a motivation to combine Guoxin and Ho to support institution. Petitioner asserted motivation to combine — improved strength and integrity of connection — is supported by the testimony of Dr. Cameron. Dr. Cameron testifies: “Integrally molding the extended portion of Guoxin with the inlet device as taught by Ho would be advantageous in improving the strength and integrity of the connection, and to make it easier to manufacture and assemble.” Ex. 1004 ¶ 125. Based on the record at this stage of the proceeding, we determine that Petitioner has sufficiently shown that the combination of Guoxin and Ho teaches element 1B.” slip op. at 20
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Dynaenergetics Europe GmbH / Dynaenergetics US, Inc. v. Qinetiq LimitedNo claims unpatentablePTAB · Apr 11, 2024 · PGR2023-00003 · APJ William A Capp · PGR · Final written decision
The Board held claims 1–5 not unpatentable; Petitioner failed to prove its asserted §101, §102, §103, and §112 grounds, including indefiniteness and written-description challenges.
RulingsFinal written decision- BurdenNot shown unpatentable
“prevail, Petitioner bears the burden to demonstrate that the challenged claims are unpatentable. Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016). This burden never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat'l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). The standard of proof is preponderance of the evidence. 35 U.S.C. § 326(e); 37 C.F.R. § 42.1(d). We have jurisdiction under 35 U.S.C. § 6.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill Petitioner’s expert, Mr. Serra testifies that he is familiar with the” slip op. at 45
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“process of claim 1. The first principal decision is the selection of a known liner design from a library that is made at the beginning of the design process. The second principal decision is made at the conclusion of the design process where a “final liner design” emerges after hole shapes produced by modified liners converge toward the desired hole shape. A person of ordinary skill in the art, having read claim 1 in context, would understand that the term “optimized” in the claim refers to the hole shape of the known liner design that is selected from among the known liner designs in the library during the selection step of the claim. A person of ordinary skill in the art would similarly understand that the design that is chosen in the initial selection process is “optimized” with respect to the population of known liner designs in the library as opposed to being “optimized” relative to liner designs produced during the later varying and modelling steps of the design process.” slip op. at 26
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteNot shown unpatentable
“Accordingly, Petitioner has not shown that claims 1–5 of the ’039” slip op. at 22
Patent outcomesUS 11,215,039 not shown unpatentableClaim construction§ 101 eligibility§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Bilski · Phillips · Markman · NautilusPatents in suitUS 11,215,039 - PTAB · Nov 21, 2023 · IPR2023-00865 · APJ Carl M Defranco · IPR · Institution
The Board instituted IPR of claims 1–19, finding a reasonable likelihood that claims 1 and 14 are obvious over Carr and Lauka.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION For the above reasons, we determine that the information presented in the Petition demonstrates a reasonable likelihood that at least claims 1 and 14 of the ’465 patent are unpatentable as obvious over Carr and Lauka. And because Instacart demonstrates that at least one claim of the ’465 patent meets the threshold for institution, we institute an inter partes review of all claims as challenged in the Petition. See 37 C.F.R. § 42.108(a),(c); SAS, 138 S. Ct. at 1359–60. IV. ORDER Accordingly, it is: ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of claims 1–19 of the ’465 patent is instituted; and” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” Prelim. Resp. 29. Consumeron’s definition appears to overlap significantly with Instacart’s definition. Accordingly, for purposes of institution, we adopt the level of skill in the art as articulated by Instacart.” slip op. at 5
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“product ordered by the customer is available and does not contemplate a scenario where the product is unavailable or otherwise describe the action to be taken if the product is unavailable. See Pet. 17–22. We agree, at least based on the preliminary record. In particular, with reference to Figures 2 and 3, the ’848 parent application describes a method where (1) a customer chooses “a store where a desired product is being sold” (step 105), (2) the customer selects a delivery agent and sends an “acquisition request” to the delivery agent (steps 108, 109, 110), and (3) “the selected delivery agent travels to the store location . . . and finds the desired product to be acquired” (step 113). Ex. 1011 ¶¶ 17, 20, 23 (emphasis added). “The delivery agent then communicates to the customer that the product has been identified, and the customer has the option of inspecting the product in real-time” (step 117). Id. ¶ 23 (emphasis added). “Next, the customer either approves or rejects acquisition of the inspected product” (steps 119, 120, 122). Id. ¶ 24 (emphasis added). That description in the ’848 parent application clearly presumes that the product ordered by the customer has been located and is available for inspection, which is at odds with the additional requirements of claims 1 and 14 of “failing to locate an identified product” and “determining that the identified product is not available.” Ex. 1001, 11:20 (claim 1), 12:30 (claim 14) (emphases added). To the extent Consumeron argues otherwise, we are not persuaded at this preliminary stage. According to Consumeron, the customer’s rejection of the product means that “the agent fails to locate a product that is satisfactory.” See Prelim Resp. 11. But nowhere do we discern that the ’848 parent application hinges the identity and availability of a product on whether it is satisfactory to the customer. That a product might not meet a customer’s satisfaction does not negate the description in the ’848 parent application that the agent locates and identifies the product in the first instance before giving the customer the option to inspect and reject the product. Indeed, because the customer placed the online order with a store advertising the product, the presumption is that the advertised product is available and satisfactory to the customer.8 And, while conceivably the purchase of a product cannot be fulfilled in the event the product is unavailable, it would seem to be improper hindsight to derive written description support by “[w]orking backward from a knowledge of the claims.” Novozymes A/S v. DuPont Nutrition Biosciences APS, 723 F.3d 1336, 1349 (Fed. Cir. 2013). “Entitlement to a filing date does not extend to subject matter which is not disclosed, but would be obvious over what is expressly disclosed. It extends only to that which is disclosed.” Lockwood v. American Airlines, Inc., 107 F.3d 1565, 1571–72 (Fed. Cir. 1997). Thus, based on the preliminary record, the ’848 parent application does not provide sufficient written description for the terms noted above. As such, we find that Instacart demonstrates a reasonable likelihood it will prevail in showing that the asserted references are prior art to the challenged claims.” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“and Lauka. See Pet. 30–44, 47–49. We begin with Instacart’s challenge of method claim 1. Instacart provides a detailed mapping of how Carr satisfies all the recited limitations of claim 1, except limitation [1.0.3], for which Instacart points to Lauka. See id. at 35–44. In particular, Instacart cites the following evidence in support of its contentions that Carr and Lauka, when combined, teach or suggest each of the recited limitations of claim 1: Limitation 1.0.1—“A method for remote acquisition and delivery of goods through one or more agents of a service provider” (Pet. 35 (citing Ex. 1005 ¶¶ 36, 39, 43, 45, 92, Figs. 1, 3, 6;; Ex. 1001 ¶¶ 97–100)); Limitation 1.0.2—“each agent having a mobile agent system in communication with at least one remote server,” (Pet. 35–37 (citing Ex. 1005 ¶¶ 2, 6, 40–43, 53, Fig. 1 (annotated); Ex. 1003 ¶¶ 101–104)); Limitation 1.0.3—“with each mobile agent system including: a digital image capture device and a communication device, said method comprising:” (Pet. 37–38 (citing Ex. 1005 ¶¶ 74, 88, 94, 122; Ex. 1006, 3:19–28, 3:49–57, 4:10–21; Ex. 1003 ¶¶ 105– 109)); Limitation 1.1—“receiving, through the at least one remote server, a first acquisition request from a customer for a first set of one or more goods;” (Pet. 38 (citing Ex. 1005 ¶¶ 9, 60, 73, Fig. 1; Ex. 1003 ¶¶ 110–112)); Limitation 1.2—“contacting, through the communications device, the one or more agents;” (Pet. 38 (citing Ex. 1005 ¶¶ 57, 74; Ex. 1003 ¶¶ 113–115)); Limitation 1.3—“upon failing to locate an identified product of the set of one or more goods, electronically transmitting information on a replacement product for the identified product of the set of one or more goods to the customer using the digital image capture device of the agent, including:” (Pet. 38–40 (citing Ex. 1005 ¶¶ 90, 95, 96, 105, 107, ; Ex. 1003 ¶¶ 116– 119)); Limitation 1.4—“obtaining a bar or QR code of the replacement product;” (Pet. 40 (citing Ex. 1005 ¶¶ 95, 107; Ex. 1003 ¶¶ 120– 122)); Limitation 1.5—“determining the information from the bar or QR code, wherein the information includes at least one image of the replacement product; and” (Pet. 40–42 (citing Ex. 1005 ¶¶ 95–96, 116; Ex. 1003 ¶¶ 123–127)); Limitation 1.6—“sending the information for the customer to approve the purchase of the replacement product based on the information determined from the bar or QR code; and” (Pet. 42– 43 (citing Ex. 1005 ¶¶ 51, 96–99, Fig. 12; Ex. 1003 ¶¶ 128– 130)); and Limitation 1.7—“upon receiving approval of the purchase from the customer, acquiring the replacement product, via the agent.” (Pet. 43–44 (citing Ex. 1005 ¶¶ 99, 101; Ex. 1003 ¶¶ 131–132)); Instacart also provides a reason why one skilled in the art would have combined the teachings of Carr and Lauka with a reasonable expectation of success. See Pet. 31–34 (citing Ex. 1003 ¶¶ 86–96); see also id. at 37 (“In view of the teachings of Lauka, a POSITA would have recognized that it was obvious to implement the UPC scanner functionality of Carr’s handheld device using an ‘imaging device’ such as that taught by Lauka, which specifies that the ‘imaging device 206 can comprise a video or still camera’ and ‘can be used to capture images.’ Ex.1006, 3:49-57; Ex.1003, ¶¶105- 107.”).” slip op. at 11
Claim construction§ 103 obviousness§ 112 disclosurePatents in suitUS 11,238,465 - Mercedes-Benz USA, LLC v. Westport Fuel Systems Canada Inc.Institution deniedPTAB · Jun 20, 2023 · IPR2023-00351 · APJ Frances L Ippolito · IPR · Institution
The Board denied institution on all challenged claims because the claims receive the provisional’s earlier priority date, making Gottlieb unavailable as prior art.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the Petition and any response thereto shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail in showing the unpatentability of at least one of the challenged claims. Accordingly, we do not institute inter partes review of claims 1–3, 6, 13, 14, 16–22, 26–28, and 41 of the ’138 patent based on the grounds raised in the Petition.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Entitled to earlier dateDecided for patent owner
“Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Likewise, we observe that claim 41 recites that the “hydraulic fluid acts as an incompressible solid so that movement caused by the actuation of said dimensionally responsive member is transmitted through said fluid layer.” Ex. 1001, 20:53–56 (emphases added). Again, the ’791 provisional discloses that the “trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16.” Id. at 12:5–13:14 (emphases added). We find, based on this description of the hydraulic link, with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, it would act as an incompressible solid. Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 12
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Likewise, we observe that claim 41 recites that the “hydraulic fluid acts as an incompressible solid so that movement caused by the actuation of said dimensionally responsive member is transmitted through said fluid layer.” Ex. 1001, 20:53–56 (emphases added). Again, the ’791 provisional discloses that the “trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16.” Id. at 12:5–13:14 (emphases added). We find, based on this description of the hydraulic link, with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, it would act as an incompressible solid. Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot reached
“Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 13
§ 102 anticipation§ 112 disclosurePatents in suitUS 6,575,138
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.