- Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Catalyst Orthoscience Inc. v. Shoulder Innovations, Inc.Institution deniedPTAB · Apr 24, 2025 · PGR2025-00001 · APJ James A Tartal · PGR · Institution
The Board denied institution of post-grant review of claims 1–22, exercising its discretion under § 324(a) based on the Fintiv factors.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv 5−6. We consider these factors to assess “whether efficiency, fairness, and the merits support the exercise of authority to deny institution in view of an earlier trial date in the parallel proceeding.” Id. at 6. In” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“parties, we do not find the merits to be particularly strong on the current record. For example, limitation [1-4] recites, in part, “a locking nut having . . . an external thread on an outside surface of the locking nut.” Ex. 1001, 9:46–47. In alleging obviousness based in part on Orphanos, Petitioner equates the claimed “locking nut” to Orphanos’s collet 230 in a first embodiment of Orphanos, or Orphanos’s collet portion 1052 in a second embodiment of Orphanos. Pet. 37–38. Petitioner acknowledges that the collet and collet portion do not have external threads, but rather are designed to have a snap-fit engagement with the inner sidewall of the baseplate’s central throughbore. Id. at 38. Petitioner argues that modifying the collet and collet portion to have external threads would have been obvious to the skilled artisan in view of Orphanos’s teachings and the knowledge of a person having ordinary skill in the art. Pet. 38–42 (arguing, inter alia, that it would have been “a substitution of a known part for a known problem” and “obvious as a matter of design choice”). Petitioner does not allege that replacing the snap-fit coupling with external threads would either: (1) result in any advantages; or (2) preserve any of Orphanos’s stated benefits of its snap-fit arrangement. See Pet. 34–37. That Petitioner describes no advantages to making its proposed modification potentially undermines Petitioner’s case that the skilled artisan would have done so. Cf. Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”).” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANot reached
“Petitioner’s arguments regarding the central post and locking nut include an implicit claim construction argument that these components need not be separate structures. Pet. 74, 76–81. Patent Owner, on the other hand, would have us interpret the claim to require that they be separate structures. Patent Owner raises credible evidence to support its theory. Specifically, Patent Owner directs us to the language of claim 1, which separately recites “a central screw” and “a locking nut.” Prelim. Resp. 51; see Ex. 1001, 9:44–53. Patent Owner further contends, in view of the claim language, that the claimed central post and locking nut are separate and distinct components. According to Patent Owner, however, Lefebvre’s main head and anchor rod portions are parts of a single monolithic anchoring screw. Prelim. Resp. 53–58. Where a claim lists elements separately, there is a rebuttable presumption that these elements have separate and distinct physical structures. See Google LLC v. EcoFactor, Inc., 92 F.4th 1049, 1058 (Fed. Cir. 2024) (citing Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1231–1232 (Fed. Cir. 2011)). The presumption may be rebutted by the intrinsic record. Id. At this stage, however, Petitioner does not address that claim 1 appears to separately recite a central post and a locking nut, and does not direct us to any portion of the intrinsic record that might rebut the presumption that these elements are, therefore, separate and distinct structures. See Pet. 73–77. Petitioner also argues that the claim terms “baseplate central channel” and “central channel . . . configured to interface with the baseplate” are indefinite. Pet. 95–102. Patent Owner argues that the plain and ordinary meaning of the terms is clear and that Petitioner “had no problem” arguing how the asserted art purportedly rendered the claims obvious. Prelim. Resp. 69–77.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)Not reached
“Petitioner also argues that the claim terms “baseplate central channel” and “central channel . . . configured to interface with the baseplate” are indefinite. Pet. 95–102. Patent Owner argues that the plain and ordinary meaning of the terms is clear and that Petitioner “had no problem” arguing how the asserted art purportedly rendered the claims obvious. Prelim. Resp. 69–77. In sum, even if Petitioner’s contentions show it is more likely than not that at least one of the claims challenged in the Petition is unpatentable, we find Patent Owner’s arguments identify credible weaknesses in Petitioner’s contentions. Accordingly, we find that that the sixth Fintiv factor is neutral and does not weigh against discretionary denial.” slip op. at 18
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 12,023,254 - Catalyst Orthoscience Inc. v. Shoulder Innovations, Inc.Institution deniedPTAB · Dec 19, 2024 · PGR2024-00042 · APJ Lisa L Tsang · PGR · Institution
The Board denied institution of PGR challenging claims 1–16, finding the first five Fintiv factors favored denial and the petition did not present compelling merits.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“during the conference and in the Minute Entry, and in the court’s subsequent Order Regarding Schedule. We also note that the evidence shows the district court may intend to reschedule the trial to a date substantially earlier than March 9, 2026. See Ex. 2010, 5; Ex. 1029, 10−11. However, given that the Order does not unambiguously set a trial date for December 1, 2025, or even sometime in December 2025 or January 2026 (see Ex. 1028), we decline to speculate as to what date the court may ultimately select for trial. Moreover, the record shows that Petitioner has consistently opposed moving the trial to a date earlier than March 9, 2026. See Ex. 2010, 5; Ex. 1026, 2−4; Ex. 1029, 11. We view Petitioner’s opposition as creating yet more ambiguity as to the trial date in the co-pending litigation. Therefore, we find that factor 2 is neutral because the exact trial date in district court is uncertain.” slip op. at 14
- BurdenNot reached
“if unrebutted in trial, would plainly lead to a conclusion that one or more claims are unpatentable by a preponderance of the evidence.” Guidance Memo 4. This standard is only met “if it is highly likely that the petitioner would prevail with respect to at least one challenged claim.” OpenSky Indus., LLC v. VLSI Tech. LLC, IPR2021-01064, Paper 102 at 49 (Vidal Oct. 4, 2022) (precedential) (citing Guidance Memo 4). We have reviewed Petitioner’s challenges and Patent Owner’s arguments. For the reasons explained below, we determine that Petitioner’s challenges have not risen to the threshold of compelling merits. Before addressing the parties’ arguments regarding the asserted grounds, we address: (a) the level of ordinary skill in the art, (b) claim construction, and (c) relevant principles of law; and we provide (d) overviews of the asserted art.” slip op. at 18
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that its proffered additional level of ordinary skill in the art appears consistent with the experience Petitioner describes. See Pet. 16. For purposes of this Decision, we adopt the level of ordinary skill in the art articulated by Petitioner and supplemented by Patent Owner, because, based on the current record, it is consistent with our review and understanding of the technology and descriptions in the ’561 patent and prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that the open-ended language “at least” expands the range of education and experience indefinitely with no upper bound. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 19
- Expert testimonyPetitioner expert creditedDecided for petitioner
“In this regard, Mr. Fallin testifies that I have decades of experience working directly with joint replacement systems, including hip joint replacement systems, knee replacement systems, and facet joint replacement systems. My work on these joint replacement systems included my direct engagement or supervision of and professionals in the inventing, designing, fabricating, testing, obtaining regulatory approvals, ensuring regulatory compliance, commercializing, and patenting of these systems. Ex. 1002 ¶ 10. Mr. Fallin also testifies that his experience “includes working directly with supervising professionals whose responsibilities included designing, developing, and commercializing joint replacement systems and similar device[s].” Id. ¶ 67 As such, Mr. Fallin identifies “decades” of experience with joint replacement systems. Ex. 1002 ¶ 10. Moreover, Patent Owner does not persuasively explain why Mr. Fallin’s “direct engagement” and “working directly with,” as well as “supervision” of, other individuals designing joint replacement systems, does not at least imply personal design experience. See Prelim. Resp. 10–11. Therefore, we determine that the current record reflects that Mr. Fallin is qualified to testify as to the knowledge of a person of ordinary skill in the art.” slip op. at 20
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham · NautilusPatents in suitUS 11,771,561 - PTAB · Nov 22, 2024 · PGR2024-00034 · APJ Patrick R Scanlon · PGR · Institution
Instituted PGR on claims 1–19 and all asserted grounds after finding at least one claim more likely than not unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority to determine whether to institute a post-grant review. See 35 U.S.C. § 324 (2018); 37 C.F.R. § 42.4(a) (2022). To institute a post-grant review, we must determine that “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that the information presented shows that it is more likely than not that Petitioner would prevail in establishing unpatentability of at least one challenged claim. Accordingly, we institute a post-grant review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We note that the identification of a Ph.D. as an example of “more formal education” creates a vast range of education relative to a bachelor’s degree. Thus, we treat the identification of a Ph.D. just as it is—an example—and not a requirement. In this case, “more formal education” can be satisfied by a level of education less than a Ph.D (but greater than a bachelor’s degree). Based on our review of the record before us, we determine that Petitioner’s stated level of ordinary skill in the art is reasonable because it appears consistent with the evidence of record, definition, limited as discussed above, for the purposes of this Decision.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the present record, we do not discern a need to construe explicitly any claim language because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“would have understood Unger’s disclosure to “suggest the use of a torsion spring to facilitate attachment and detachment, because torsion springs are designed to impart this functionality.” Id. (citing Ex. 1002 ¶ 118). Petitioner also asserts that one of ordinary skill in the art would have “understood that there were a limited number of ways to impart the referenced resilient or flexible ‘manipulation,’” and “would have been motivated to look to various known solutions to impart the suggested functionality, including the torsional spring mechanism of Smith that is used in a similar hearing protection device application for a similar purpose as Unger’s mounting arms (to apply a clamping force).” Id. at 32 (citing Ex. 1002 ¶¶ 120–121).” slip op. at 17
Claim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,736,855 - PTAB · Nov 14, 2024 · PGR2024-00026 · APJ Hyun J Jung · PGR · Institution
Instituted PGR on claims 1–7 and all grounds because Petitioner showed it was more likely than not that at least one challenged claim lacks written-description support.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this stage, Petitioner’s arguments, cited portions of the Specification, and supporting testimonial evidence demonstrate that it is more likely than not that claims 1–7 are unpatentable.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateDecided for petitioner
“patent describes that “angular position transducer 78 is placed on top of swing leg pivot shaft 24” and that “pivot shaft 24 is rotationally fixed to the connector plate and duplicates the angular movements of swing leg 20 about the pivot shaft.” Ex. 1001, 12:15–16, 12:20–22, Figs. 5, 7. The ’723 patent also describes that “[a]ngular position transducer 78 is mounted inside . . . protective can 90 . . . which is bolted to hinge bracket 28 via an upright holding arm 92” and that “trigger pin 94 projects upwardly from the top surface of pivot shaft 24 and cooperates with angular position transducer 78 to generate an angular position signal.” Id. at 12:28–33, Fig. 5. These descriptions expressly convey that angular position transducer 78 is on pivot shaft 24 and mounted inside protective can 90 that is bolted to hinge bracket 28. Id. at 12:15–16, 12:20–22, 12:28–30, Figs. 5, 7; see also Prelim. Resp. 17 (describing the same embodiment shown in Figs. 5 and 7). According to Petitioner, the ’723 patent describes the pivot shaft as part of the hinge bracket, not the modular frame or swing leg. Pet. 109–110 (citing Ex. 1001, 7:42–46, 12:17–22). On the preliminary record, we agree because the cited portions of the Specification describe that a “hinge bracket is interposed between each swing leg and an associated surface of the bolsters and includes a fixed, upright pivot shaft that pivotally engages the swing leg for pivotal movements” and “pivot shaft 24 is rotationally fixed to the connector plate.” Ex. 1001, 7:42–45, 12:20–21. We also agree that “even if one were to find that the hinge bracket is part of either the modular frame or swing leg (contrary to the claims and specification treating these all as separate components), the specification would only provide written description for one of the claimed alternatives.” Pet. 110 (citing Ex. 1002 ¶ 199).” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this preliminary stage, we determine that express claim interpretation is not necessary to determine whether it is more likely than not that at least one of the claims challenged in the petition is unpatentable. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We will also not use our discretion under § 325(d) to deny the Petition based on arguments previously presented in IPR2021-00135, because Petitioner relies on a Board determination regarding claim 8 from IPR2021- 00136, not arguments previously made for claim 1 in IPR2021-00135. Pet. 111–115, 119; Prelim. Resp. 8–9; Prelim. Sur-reply 5. Furthermore, we determined the effective filing date of claim 8 of the ’571 patent without deciding, that other challenged claims, such as claim 1, were entitled to their earliest possible effective filing date. See Godberson-Smith, Paper 61 at 11, 12.” slip op. at 12
Claim construction§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,772,723 - Fluidmaster, Inc. v. Danco, Inc.InstitutedPTAB · Sep 9, 2024 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Institution
Instituted IPR of claims 1–20 on all asserted grounds; the Board found a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’993 patent. Accordingly, we institute an inter partes review of claims 1–20 of the ’993 patent on the grounds asserted in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“presented to the Office.” Prelim. Resp. 31– 36. In determining whether to deny institution under § 325(d) we use a two-part framework, as follows: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 at 17–18 (PTAB Dec. 15, 2017) (precedential as to § III.C.5, first paragraph)).” slip op. at 8
- BurdenDecided for petitioner
“At this stage of the proceeding, Patent Owner provides no sufficient evidence to rebut Dr. Cameron’s testimony as to what a POSITA would have known from Guoxin and Ho’s drawings and as to the alleged motivations to combine Guoxin and Ho. Based on Petitioner’s evidence and analysis, and taking into account the Preliminary Response, at this stage of the proceeding, we determine that the information in the Petition shows a reasonable likelihood that claim 1 is unpatentable over Guoxin and Ho.” slip op. at 24
- Skill levelSkill level patent owner adoptedDecided for patent owner
“A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’993 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. Prelim. Resp. 16. Petitioner’s declarant Dr. Cameron asserts that: A [POSITA] with respect to the subject matter of the ’993 patent at the time of the priority date, January 27, 2014, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. Ex. 1004 ¶ 29. For purposes of this Decision, we adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’993 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Dr. Cameron.” slip op. at 12
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Fluidmaster, Inc. v. Danco, Inc.InstitutedPTAB · Sep 9, 2024 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Institution
The Board instituted IPR of claims 1–24 on all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’105 patent. Accordingly, we institute an inter partes review of claims 1–24 of the ’105 patent on the grounds asserted in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“Previously presented art includes art made of record by the Examiner, and art provided to the Office by an applicant, such as on an Information Disclosure Statement (“IDS”), in the prosecution history of the challenged patent. Id. at 7–8. Here, it is not disputed that Brown and Bjerke were listed on an IDS and, thus, were previously presented to the Office. Pet. 12, n.4; Prelim. Resp. 33. It is also not disputed that Guoxin, Ho, Calmettes, Hall, Kimber, and Schuster were not previously presented to the Office. See Prelim. Resp. 33. Patent Owner argues that Guoxin, Brown, and Ho are cumulative of a reference, DeMarco9, that was previously presented to the Office and relied upon to reject the claims. Prelim. Resp. 33 Patent Owner argues that Guoxin, Brown, and Ho are cumulative to DeMarco because all of the “references are completely silent as to whether the purported ‘extended portion’ is integrally molded with the purported body of the toiled fill valve.” Id. at 33–36. Patent Owner’s arguments are unpersuasive. As can be seen from our discussion of Ho in our analysis below, on this record, we are persuaded that Petitioner has sufficiently shown for purposes of institution how Ho allegedly teaches the claimed integrally molded extended portion. We, thus, are not persuaded that at least Ho is cumulative of DeMarco. Grounds 1–4 rely upon combinations of prior art that include Ho. Ground 5 is based upon Schuster, which was not previously presented to the 9 U.S. Patent No. 5,708,991 (Ex. 1024). Office. Accordingly, we determine that discretionary denial is not warranted. Because we determine that part one of the framework is not satisfied, we need not turn to part two to determine whether Petitioner demonstrates that the Office erred in a manner material to the patentability of the challenged claims. For the reasons discussed above, we decline to exercise our discretion under § 325(d) to deny the Petition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“On this record, we are persuaded by Patent Owner that the claim phrase “integrally molded with” should be construed to mean “molded together as a single structure” and to exclude items created as separate pieces and attached together later. Patent Owner’s construction is consistent with the plain language of the claims, which requires the extended portion be “integrally molded with” the body and not just the extended portion be integral with the body. Further, we determine that Patent Owner’s construction is consistent with the ’105 patent, which discloses that “the bowl fill valve 109 may be molded as a portion of the toilet fill valve 100 or it may be snapped or clamped into place, or it may be attached to the toilet fill valve 100 in some other manner, etc.” Id. at 2:23–26 (emphasis added). At this stage of the proceeding, we construe “integrally molded with” to mean molded together as a single structure.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner next disputes that a POSITA would have combined Guoxin and Ho and argues that Petitioner’s alleged rationale to combine Guoxin and Ho as conclusory and lacks sufficient support. Prelim. Resp. 40–42. We determine that Petitioner has sufficiently articulated a motivation to combine Guoxin and Ho to support institution. Petitioner asserted motivation to combine — improved strength and integrity of connection — is supported by the testimony of Dr. Cameron. Dr. Cameron testifies: “Integrally molding the extended portion of Guoxin with the inlet device as taught by Ho would be advantageous in improving the strength and integrity of the connection, and to make it easier to manufacture and assemble.” Ex. 1004 ¶ 125. Based on the record at this stage of the proceeding, we determine that Petitioner has sufficiently shown that the combination of Guoxin and Ho teaches element 1B.” slip op. at 20
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Bj’S Wholesale Club Holdings, Inc. v. Walmart Apollo, LLCAll claims unpatentablePTAB · Apr 10, 2024 · IPR2022-01564 · APJ Patrick R Scanlon · IPR · Final written decision
Claims 1–14 are unpatentable as anticipated by Keith; the Board did not reach the alternative obviousness ground over Hanson and Keith.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“claims of the later-filed application must be supported by the written description in the parent ‘in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.’” Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1335 (Fed. Cir. 2010) (quoting Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997)). “[T]he hallmark of written description is disclosure,” and the test “is whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date” of that application. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc) (citing Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1562–63 (Fed. Cir. 1991)). “[T]he test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. But, “[i]t is not sufficient for purposes of the written description requirement of [35 U.S.C.] § 112 that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood, 107 F.3d at 1572.” slip op. at 33
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. Inc., v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). Moreover, “[b]ecause the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). Whether a reference anticipates is assessed from the perspective of an ordinarily skilled artisan. See Dayco Prods., Inc. v. Total Containment, Inc., 329 F.3d 1358, 1368 (Fed. Cir. 2003) (“‘[T]he dispositive question regarding anticipation [i]s whether one skilled in the art would reasonably understand or infer from the [prior art reference’s] teaching’ that every claim element was disclosed in that single reference.”). slip op. at 13
- BurdenFwd all claims unpatentableDecided for petitioner
“preponderance of the evidence that the claims are unpatentable. 35 U.S.C. § 316(e) (2018); 37 C.F.R. § 42.1(d) (2022). “In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review).” slip op. at 12
Patent outcomesUS 10,803,435 unpatentable§ 102 anticipation§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,803,435
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.