- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - Dynaenergetics Europe GmbH / Dynaenergetics US, Inc. v. Qinetiq LimitedNo claims unpatentablePTAB · Apr 11, 2024 · PGR2023-00003 · APJ William A Capp · PGR · Final written decision
The Board held claims 1–5 not unpatentable; Petitioner failed to prove its asserted §101, §102, §103, and §112 grounds, including indefiniteness and written-description challenges.
RulingsFinal written decision- BurdenNot shown unpatentable
“prevail, Petitioner bears the burden to demonstrate that the challenged claims are unpatentable. Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016). This burden never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat'l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). The standard of proof is preponderance of the evidence. 35 U.S.C. § 326(e); 37 C.F.R. § 42.1(d). We have jurisdiction under 35 U.S.C. § 6.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill Petitioner’s expert, Mr. Serra testifies that he is familiar with the” slip op. at 45
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“process of claim 1. The first principal decision is the selection of a known liner design from a library that is made at the beginning of the design process. The second principal decision is made at the conclusion of the design process where a “final liner design” emerges after hole shapes produced by modified liners converge toward the desired hole shape. A person of ordinary skill in the art, having read claim 1 in context, would understand that the term “optimized” in the claim refers to the hole shape of the known liner design that is selected from among the known liner designs in the library during the selection step of the claim. A person of ordinary skill in the art would similarly understand that the design that is chosen in the initial selection process is “optimized” with respect to the population of known liner designs in the library as opposed to being “optimized” relative to liner designs produced during the later varying and modelling steps of the design process.” slip op. at 26
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteNot shown unpatentable
“Accordingly, Petitioner has not shown that claims 1–5 of the ’039” slip op. at 22
Patent outcomesUS 11,215,039 not shown unpatentableClaim construction§ 101 eligibility§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Bilski · Phillips · Markman · NautilusPatents in suitUS 11,215,039 - Penumbra, Inc. v. Rapidpulse, Inc.All claims unpatentablePTAB · Sep 6, 2023 · IPR2022-00608 · APJ Jamie T Wisz · IPR · Final written decision
Claims 1–21 are unpatentable: claims 1–14, 17–19, and 21 as obvious over Teigen and Grey; claims 15–16 over Teigen, Grey, and Yang; and claim 20 over Teigen, Grey, and Matteo.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. PERSON OF ORDINARY SKILL IN THE ART In determining the level of skill in the art, we consider the type of problems encountered in the art, the prior art solutions to those problems, the rapidity with which innovations are made, the sophistication of the technology, and the educational level of active workers in the field. Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986). The level of ordinary skill in the art is “a prism or lens through which . . . the Board views the prior art and claimed invention” to prevent hindsight bias. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“as adopted by the Board in the Institution Decision. The ’253 patent explicitly defines this term, stating: The term “forward flow” is used herein to define an amount of liquid in the lumen 662 that exits the distal end 664 in a distal direction. Forward flow is defined as greater than 6 microliters of fluid (approximately 1 mm of catheter length of ID 0.071″=5.7 μL). Ex. 1001, 38:18–23 (emphasis added). Moreover, in discussing problems with the prior art systems, the ’253 patent states that “[w]hen positive pressure exists at the distal end of the lumen, liquid from inside the lumen exits out from the distal end of the catheter in a distal direction. This is referred to as forward flow.” Id. at 3:8–11. In the ’253 patent, the patentee acted as its own lexicographer as evidenced by usage of language such as “is used herein to define,” “is defined,” and “is referred to as,” to discuss “forward flow.” We find that the definition of “forward flow” in the ’253 patent specification would provide a person of ordinary skill with “reasonable clarity, deliberateness, and precision” as to the meaning of the term. See Paulsen, 30 F.3d at 1480; see also Ex. 1034 ¶¶ 13–14. Thus, we construe the term, “forward flow,” to mean “an amount of liquid in the lumen that exits the distal end in the distal direction that is greater than 6 microliters.” We disagree with Patent Owner’s contention that our construction imports limitations from a single embodiment into the claims. As explained above, the ’253 patent clearly defines the term “forward flow” and this definition is not limited to a single embodiment. In fact, the ’253 patent indicates that, while “[f]orward flow is defined as greater than 6 microliters of fluid . . . [l]ess forward flow is also included in this definition.” Ex. 1001, 38:21–24. The ’253 patent specifies that “the amount of forward flow can be restricted to no greater than 2 microliters or, in a particularly beneficial embodiment, forward flow is approximately zero microliters.” Id. at 38:24– 29. This language indicates that our construction encompasses multiple embodiments from the ’253 patent. We also disagree with Patent’s Owner’s proposed construction of “forward flow” because it is not supported by the ’253 patent specification. Patent Owner contends that “there is ‘no forward flow’ until the full extent of the distal portion” exits the distal end and thus forward flow is prevented when only less than “the full extent of the distal portion” exits the distal end. PO Resp. 9 (emphasis omitted). To adopt Patent Owner’s proposed construction, we would have to essentially ignore the ’253 patent’s express definition of this term. Further, there is no support in the ’253 patent specification for “full extent” or “fully exiting.” We also agree with Petitioner that Patent Owner’s construction effectively eliminates the concept of preventing forward flow because, as Patent Owner acknowledges, it could allow, for example, 20 milliliters of fluid to exit the catheter, which could displace the thrombus into the patient’s vasculature, a problem that the ’253 patent seeks to avoid. See PO Resp. 10–12 (citing Ex. 2014 ¶¶ 48–51); Pet. Reply 8–9 (citing Ex. 1034 ¶¶ 14–15).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“As discussed above, we construe “forward flow” to mean “an amount of liquid in the lumen that exits the distal end in the distal direction that is greater than 6 microliters.” Thus, for the ’011 provisional to provide support for this limitation, the provisional must demonstrate that the inventors had possession of preventing greater than 6 microliters of fluid out of the distal end of the catheter. While Patent Owner points to disclosures from the ’011 provisional application that describe the desire to have “a minimal amount of momentum transfer from the fluid column to the stuck clot to unstick the clot sufficiently” and “[t]he exiting movement of fluid [being] limited to a specific volume and/or pressure and is automatically and precisely controlled” to prevent the “possibility of overshooting,” these disclosures would not convey to one of ordinary skill in the art that the inventors were in possession of a device that limited forward flow to no greater than 6 microliters of fluid. PO Resp. 35 (citing Ex. 1003 ¶¶ 15, 16, 138). Patent Owner also contends that the ’011 provisional application provides “multiple examples of liquid flow exiting the distal end of the catheter such that no forward flow occurs, such as 1 microliter or 0.5 mm of column shift.” PO Resp. 36–37 (citing Ex. 1003 ¶ 91). However, the disclosure cited by Patent Owner provides ranges of liquid flow of “approximately 0.001 ml to approximately 1.0 ml, in particular, approximately 0.1 ml to approximately 0.5 ml” and exemplary length of shift distances of “approximately 0.5 mm to approximately 30 mm, in particular, approximately 0.5 mm to approximately 15 mm.” Ex. 1003 ¶ 91. There is nothing in the ’011 provisional application that specifically directs the person of ordinary skill to the portions of these ranges that fall within the ’253 patent’s definition of “forward flow” (i.e., no greater than 6 microliters of fluid). In fact, the majority of the cited ranges are greater than 6 microliters, going all the way up to 1,000 microliters, such that there would be forward flow in these examples. See Ex. 1034 ¶ 25; Purdue Pharma, 230 F.3d at 1326–27 (“[O]ne cannot disclose a forest in the original application, and then later pick a tree out of the forest and say here is my invention. In order to satisfy the written description requirement, the blaze marks directing the skilled artisan to that tree must be in the originally filed disclosure.”); Fujikawa v. Wattanasin, 93 F.3d 1559, 1571 (Fed. Cir. 1996). Further, we note that the ’253 patent differentiates between embodiments that allow forward flow and embodiments in which no forward flow occurs. See Ex. 1001, 32:58–60, 37:19–22; Pet. Reply 10–11. For example, the ’253 patent describes an embodiment in which the “momentum causes a small amount of fluid to move through the distal portion of the catheter [] and create a small distal movement of the clot.” Ex. 1001, 32:47– 51. This same embodiment is disclosed in the ’011 provisional application. Compare Ex. 1003 ¶ 126 with Ex. 1001, 32:16–60. The ’253 patent describes this disclosure as an “exemplary embodiment” in which the “flow of fluid forward . . . is intentional, which is in contrast to other exemplary embodiments herein where substantially no forward flow occurs.” Ex. 1001, 32:57–60; see also, id. at 37:19–22 (“Turning now to embodiments . . . without the forward flow”).8 The ’011 provisional application does not include the subsequent embodiments from the ’253 patent that are described as being “without the forward flow.” See Ex. 1005 ¶ 68; Ex. 1034 ¶¶ 22–23. This further demonstrates that the ’011 provisional application does not support the limitation of “prevent[ing] forward flow.” We also note that the ’011 provisional application does not contain adequate support for the limitation of “substantially prevent[ing] forward flow” even under Patent Owner’s proposed construction. While the ’011 provisional discloses “controlling the distal movement of the fluid column” (Ex. 1003 ¶¶ 15, 16), this does not support Patent Owner’s assertion that the ’011 provisional teaches that “the distal portion of the fluid column is substantially prevented from fully exiting the distal end.” PO Resp. 35–36. For example, as discussed above, the ’011 provisional application discloses permitting distal flow of up to 1,000 microliters, which would likely exceed the amount that could be characterized as the full distal portion. Ex. 1003 ¶ 91; Ex. 1034 ¶ 25. Thus, we find that the ’011 provisional application does not “clearly allow persons of ordinary skill in the art to recognize that [the inventors] invented what is claimed.” In re Gosteli, 872 F.2d 1008, 1012 (Fed. Cir. 1989); Lockwood v. American Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 8 Patent Owner contends that the statement in the ’253 patent regarding the “exemplary embodiment” of “forward flow” is referring to an embodiment in which the volume of the liquid drawn out from the lumen of the catheter is “approximately 0.2 ml.” PO Resp. 40–41 (citing Ex. 1001, 32:35–36; Ex. 1003 ¶ 126; Ex. 2014 ¶ 99). Even if this is correct, the ’011 provisional application does not include the embodiments that the ’253 patent specifically characterizes as being “without the forward flow.” Pet. Reply 10–11; Ex. 1005 ¶ 68; Ex. 1034 ¶ 22–25.” slip op. at 20
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“Based on the above, we determine that, for prior-art determinations under AIA § 102, “there is no need to evaluate whether any claim of [a reference] patent document is actually entitled to priority or benefit under 35 U.S.C. 119, 120.” MPEP § 2154.01(b) (emphasis added). Rather, under the AIA, a reference patent document need only meet the “ministerial requirements” of §§ 119 and 120, and the provisional or other earlier application(s) to which the reference patent document claims a right of priority must “describe[] the subject matter” relied upon in the reference patent document as prior art. 35 U.S.C. § 102(d)(2). Patent Owner has not contested that Teigen meets the procedural requirements for claiming priority to the ’712 patent or the ’095 PCT application. Teigen also appears to meet the ministerial requirements for claiming priority to the provisional applications because it properly claims the benefit of these applications, the ’095 PCT application was filed co-pending with the provisional applications, and the applications share common inventors. Ex. 1007, codes (22), (60), (63), (72); Ex.1008, 2; Ex. 1009, 2; Ex. 2005, codes (22), (30), (72). Patent Owner does not dispute that Teigen meets the “ministerial requirements” of § 119. Because we find that the Dynamic Drinkware analysis does not apply here, we agree with Petitioner and Patent Owner, that we need not reach the issue of whether a claim from Teigen is supported by either Teigen provisional application. PO Sur-Reply 8; Pet. Reply 12–13.” slip op. at 30
Patent outcomesUS 10,722,253 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,722,253 - PTAB · Jun 20, 2023 · PGR2023-00008 · APJ Kristina M Kalan · PGR · Institution
The Board instituted post-grant review of claims 1–13 on all petitioned grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute post-grant review, we must determine that the information presented in the Petition, “if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one of the challenged claims of the ’624 patent is unpatentable. Thus, we institute post-grant review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“evaluated the subject matter of Riis during examination of the ’624 patent, we agree that Riis was before the Office, as discussed in connection with our analysis of the first part of the Advanced Bionics framework, above. Examiner T presumably was aware of Riis by virtue of having initialed an IDS containing Riis in the ’624 patent’s application and also by virtue of having initialed an IDS containing Riis in the ’067 Application, but Examiner T did not apply Riis in connection with the examination of the ’624 patent. On this record, Patent Owner also fails to show that the claims of the child application leading to the ’624 patent are substantially similar to those of the parent ’814 patent in which Examiner S considered Riis, and, thus, consideration of Riis during the prosecution of the ’814 patent does not equate to consideration of Riis during the prosecution of the ’624 patent. Regarding Patent Owner’s argument (2) that Petitioner fails to sufficiently show how the Examiner erred in evaluating the prior art, we find Petitioner’s arguments demonstrate that Examiner T, the examiner of the ’624 patent, did not apply Riis (or Wypych or Tatarka) during the examination of the’624 patent. As Petitioner argues, the error lies in that “the Examiner failed to consider the relevance of Riis as it applied to the pending method claims,” because although “Riis was considered during examination of the parent ’999 application, Riis was not similarly considered during examination of the ’018 application which led to the ’624 patent.” Pet. 76–77. We determine that the circumstances here demonstrate that the Examiner erred in evaluating the prior art.” slip op. at 12
- PTAB / AIA Trials › Real party in interest / privityNot reached
“35 U.S.C. § 322(a)(2) to deny institution, arguing that the Petition fails to identify every RPI. Prelim. Resp. 10–11, 56–60. Patent Owner argues that the Petition “should also have identified its parent corporation, Huhtamäki Oyj . . . as well as the related corporation Huhtamaki, Inc. . . . as RPIs to comply with the statutory requirements for a PGR.” Id. at 10. On this record, we determine that we need not address whether Huhtamäki Oyj and Huhtamaki, Inc. are unnamed RPIs because, even if they were, it would not create a time bar or estoppel under 35 U.S.C. § 325. See SharkNinja Operating LLC v. iRobot Corp., IPR2020-00734, Paper 11 (PTAB Oct. 6, 2020) (precedential); Lumentum Holdings, Inc. v. Capella Photonics, Inc., IPR2015-00739, Paper 38 at 6 (PTAB Mar. 4, 2016) (precedential) (Board’s jurisdiction to consider a petition does not require a “correct” identification of all RPIs in a petition); see also Blue Coat Sys., Inc. v. Finjan, Inc., IPR2016-01444, Paper 11 at 10 (PTAB July 18, 2017) (“evidence [of failure to identify all RPIs] is, at best, suggestive regarding an issue that is not jurisdictional”); Mayne Pharma Int’l Pty. Ltd. v. Merck Sharp & Dohme Corp., 927 F.3d 1232, 1240 (Fed. Cir. 2019) (“[I]f a petition fails to identify all real parties in interest . . . the Director can, and does, allow the petitioner to add a real party in interest.” (quoting Wi-Fi One, LLC v. Broadcom Corp., 878 F.3d 1364, 1374 n.9 (Fed. Cir. 2018) (en banc))). Here, notwithstanding the arguments devoted to the RPI issue in the Preliminary Response, Preliminary Reply, and Preliminary Sur-Reply, we are not persuaded that Petitioner is barred or estopped from this proceeding, or that Petitioner purposefully omitted Huhtamäki Oyj or Huhtamaki, Inc. to gain some advantage. As Petitioner argues, the “RPI analysis is not necessary at institution, because Patent Owner has not alleged Petitioner would be time barred or otherwise estopped based on unnamed RPIs.” Prelim. Reply 5 (quoting SharkNinja, IPR2020-00734, Paper 11 at 18). As SharkNinja states, certain Board decisions go through extensive analysis to determine whether parties should have been named as RPIs, whereas other Board decisions determine that “such a lengthy exercise is unnecessary for the purposes of rendering a decision on institution of trial.” SharkNinja, IPR2020-00734, Paper 11 at 19. Here, as in SharkNinja, we find the latter approach better serves the interest of cost and efficiency. Thus, at this time and on this record, we will not consider whether Huhtamäki Oyj or Huhtamaki, Inc. must be named as RPIs.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“of the invention “would have had a relevant technical degree in Chemical Engineering, Polymer Science, Materials Science, or the like, and 2–3 years of experience in laminate or film manufacture or similar packaging manufacture and that less experience may be necessary with additional education and vice versa.” Pet. 17 (citing Ex. 1003 ¶¶ 66–72). In its 4 Neither Patent Owner nor Petitioner appear to present any evidence directed to secondary considerations. See generally Pet.; Prelim. Resp.; Prelim. Reply; Prelim. Sur-Reply. Preliminary Response, Patent Owner does not contest Petitioner’s asserted level of ordinary skill in the art. See generally Prelim. Resp. We adopt Petitioner’s definition, which is consistent with the level of skill in the art at the time of the invention as reflected by the prior art and the ’624 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 17
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham · NautilusPatents in suitUS 11,260,624 - PTAB · Apr 18, 2023 · IPR2022-00123 · APJ Zhenyu Yang · IPR · Final written decision
The Board cancelled original claim 1 and denied substitute claim 2 for lack of written-description support; it did not reach the obviousness or enablement grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“ordinary skill is inappropriate because it “requires qualifications that exclude even the sole inventor of the ’190 Patent, Dr. Edward Neuwelt.” MTA Opp. 1. According to Petitioner, Dr. Neuwelt is “a neurosurgeon,” not a pediatric oncologist, and lacks the requisite “at least 2 years” experience in platinum-based therapies. Id. (citing Ex. 1003, 18; Ex. 1038, 98:9–17, 100:15–101, 4). We agree with Petitioner. It is well settled that inventors are typically persons skilled in the field of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Petitioner presents persuasive evidence to show that under Patent Owner’s proposed definition of the level of ordinary skill, Dr. Neuwelt, the sole inventor, would not qualify as an ordinarily skilled artisan, because he is not a pediatric oncologist, even though he is considered “one of the world leading experts on this compound [STS] and otoprotection” and “an expert in the area of [STS] as a . . . drug to use in children with medulloblastoma.” Ex. 1038, 98:9–17, 99:17–18, 101:18–102:13.” slip op. at 10
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Paragraph 102 of Dr. Rassekh’s Declaration, however, does not support Patent Owner’s assertion. Instead, Dr. Rassekh testifies that [t]he stratum of previous craniospinal radiation therapy contained 8 participants: 2 of the 4 (50%) participants receiving STS had hearing loss compared to 4 of the 4 (100%) participants not receiving STS, and none of the hearing loss assessments were changed at the 1 year follow up period. (Ex. 1001 at 20: 28-32, 47-50.) Ex. 2024 ¶ 102. Dr. Rassekh offers no opinion on how many osteosarcoma patients with prior cranial irradiation and how many medulloblastoma patients with prior cranial irradiation had hearing loss.” slip op. at 20
- 112 supportMotion to amend, deniedDenied
“In sum, we find the disclosures of the ’243 application that Patent Owner relies on do not provide sufficient written-description support for the ototoxicity efficacy limitation.” slip op. at 21
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not reached
“F. Petitioner’s Asserted Unpatentability Grounds In light of our determination above that Patent Owner has not shown sufficient written-description support for proposed substitute claim 2 in the ’243 application, we do not reach the grounds of unpatentability set forth in Petitioner’s Opposition. See Revised MTA Opp. 17–25 (alleging non-enablement and obviousness).” slip op. at 26
§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 10,596,190 - Penumbra, Inc. v. Rapidpulse, Inc.All claims unpatentablePTAB · Mar 10, 2023 · IPR2021-01466 · APJ Jamie T Wisz · IPR · Final written decision
Claims 1–18 are unpatentable under §103: claims 1–12, 15, 16, and 18 over Teigen and Grey; claims 13–14 over Teigen, Grey, and Yang; claim 17 over Teigen, Grey, and Matteo.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Based on our consideration of the full record, we find that, overall, Patent Owner’s definition is more specifically tailored to the claimed subject matter of the ’883 patent. We also find that, a person with a biomedical engineering degree could have the required background in fluid mechanics. See Ex. 1031, 45:21–46:7. Therefore, we find that a person of ordinary skill in the art would have a B.S. in mechanical or biomedical engineering with at least three years of experience in designing systems for minimally invasive intravascular procedures for treating occluded vessels or the equivalent and in consultation with medical professionals such as interventional neurosurgeons. Although we agree with, and have primarily adopted Patent Owner’s definition for an ordinarily skilled artisan in this proceeding, our analysis and conclusions herein would not change even under Petitioner’s definition. The parties also do not indicate that the outcome would differ based on the definition of the person of ordinary skill in the art. See Pet. 15; PO Resp. 6; Pet. Reply 1.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“as adopted by the Board in the Institution Decision. The ’883 patent explicitly defines this term, stating: The term “forward flow” is used herein to define an amount of liquid in the lumen 662 that exits the distal end 664 in a distal direction. Forward flow is defined as greater than 6 microliters of fluid (approximately 1 mm of catheter length of ID 0.071″=5.7 μL). Ex. 1001, 36:18–23 (emphasis added). Moreover, in discussing problems with the prior art systems, the ’883 patent states that “[w]hen positive pressure exists at the distal end of the lumen, liquid from inside the lumen exits out from the distal end of the catheter in a distal direction. This is referred to as forward flow.” Id. at 2:62–65. In the ’883 patent, the patentee acted as its own lexicographer as evidenced by usage of language such as “is used herein to define,” “is defined,” and “is referred to as,” to discuss “forward flow.” We find that the definition of “forward flow” in the ’883 patent specification would provide a person of ordinary skill with “reasonable clarity, deliberateness, and precision” as to the meaning of the term. See Paulsen, 30 F.3d at 1480; see also Ex. 1030 ¶¶ 13–14; Ex. 2001 ¶¶ 53, 62. Thus, we construe the term, “forward flow,” to mean “an amount of liquid in the lumen that exits the distal end in the distal direction that is greater than 6 microliters.”” slip op. at 14
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“As discussed above, we construed “forward flow” to mean “an amount of liquid in the lumen that exits the distal end in the distal direction that is greater than 6 microliters.” Thus, for the ’011 provisional to provide support for this limitation, the provisional must demonstrate that the inventors had possession of preventing greater than 6 microliters of fluid out of the distal end of the catheter. While Patent Owner points to disclosure from the ’011 provisional application which describes “a minimal amount of momentum transfer from the fluid column to the stuck clot to unstick the clot sufficiently” and “[t]he exiting movement of fluid [being] limited to a specific volume and/or pressure and is automatically and precisely controlled” to prevent the “possibility of overshooting,” it would not convey to one of ordinary skill in the art that the inventors were in possession of a device that limited forward flow to no greater than 6 microliters of fluid. PO Resp. 33 (citing Ex. 1003 ¶¶ 16, 138). Patent Owner also contends that the ’011 provisional application provides “multiple examples of liquid flow exiting the distal end of the catheter such that no forward flow occurs, such as 1 microliter or 0.5 mm of column shift.” PO Resp. 34 (citing Ex. 1003 ¶ 91). However, the disclosure cited by Patent Owner provides ranges of liquid flow of “approximately 0.001 ml to approximately 1.0 ml, in particular, approximately 0.1 ml to approximately 0.5 ml” and exemplary length of shift distances of “approximately 0.5 mm to approximately 30 mm, in particular, approximately 0.5 mm to approximately 15 mm.” Ex. 1003 ¶ 91. There is nothing in the disclosure of the ’011 provisional application that specifically directs the person of ordinary skill to the portions of these ranges which fall within the ’883 patent’s definition of no “forward flow” (i.e., no greater than 6 microliters of fluid). In fact, the majority of the cited ranges are greater than 6 microliters, going all the way up to 1,000 microliters, such that there would be forward flow in these examples. See Ex. 1030 ¶ 29; Purdue Pharma, 230 F.3d at 1326–27 (“[O]ne cannot disclose a forest in the original application, and then later pick a tree out of the forest and say here is my invention. In order to satisfy the written description requirement, the blaze marks directing the skilled artisan to that tree must be in the originally filed disclosure.”); Fujikawa v. Wattanasin, 93 F.3d 1559, 1571 (Fed. Cir. 1996).” slip op. at 21
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“AIA § 102 draws a distinction between actually being entitled to a right of priority to, or the benefit of, a prior-filed application according to the definition of “effective filing date” of a claimed invention in AIA 35 U.S.C. § 100(i)(1)(B), and merely being entitled to claim a right of priority to, or the benefit of, a prior-filed application for prior-art purposes according to the use of “effectively filed” in AIA 35 U.S.C. § 102(d). See 35 U.S.C. §§ 100(i)(1)(B), 102(a)(2), 102(d)(2); MPEP § 2154.01(b). USPTO guidance also indicates that AIA § 102 prior-art reference effective-filing-date determinations differ from pre-AIA law. For example, a 2018 Memorandum to the Patent Examining Corps states, in the context of prior-art determinations, that “[t]he requirement that one of the claims in the patent [document] . . . be supported by the written description of the provisional application in compliance with pre-AIA 35 U.S.C. § 112, first paragraph (or AIA 35 U.S.C. § 112(a)), is not applicable when examining an application subject to the first inventor to file provisions of the AIA.” Robert W. Bahr, Memorandum re: Critical Reference Date Under pre-AIA 35 U.S.C. §102(e) (Apr. 5, 2018), available at http://www.uspto.gov/sites/ default/files/documents/dynamic_memo_05apr2018_0.pdf (emphasis added) (citing Dynamic Drinkware, 800 F.3d at 1381 n.2; 157 Cong. Rec. 3423 (2011) (explaining the distinction between being entitled to claim priority or benefit in AIA 35 U.S.C. § 102(d) and actually being entitled to priority or benefit under 35 U.S.C. § 119, 120, or 365)). This Memorandum further indicates: The date subject matter was “effectively filed” under AIA 35 U.S.C. § 102(d) for purposes of considering a U.S. patent, a U.S. patent application publication, or an international application publication as prior art under AIA 35 U.S.C. § 102(a)(2) is discussed in MPEP § 2154.01(b), and is not affected by Dynamic Drinkware or [Amgen v. Sanofi, 872 F.3d 1367, 1380 (Fed. Cir. 2017)] and is not being modified by this memorandum. Id. at 2. MPEP § 2154.01(b) explicitly states, as a result of the distinction discussed above, in application of the AIA version of § 102, “the question of whether a patent or published application is actually entitled to priority or benefit with respect to any of its claims is not at issue in determining the date the patent or published application was ‘effectively filed’ for prior art purposes.” MPEP § 2154.01(b) (emphases added).” slip op. at 31
Patent outcomesUS 10,531,883 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,531,883 - Minerva Surgical, Inc. v. Hologic, Inc.All claims unpatentablePTAB · May 8, 2018 · PGR2017-00002 · APJ Meredith C Petravick · PGR · Final written decision
Claims 1–19 are unpatentable under § 112(a) for lack of written description; Petitioner did not prove lack of enablement.
RulingsFinal written decision- BurdenUnpatentable
“Written Description and the ’506 Application The test for written description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351.” slip op. at 23
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable
“Written Description and the ’506 Application The test for written description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351.” slip op. at 23
- Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledNot shown unpatentable
“Under 35 U.S.C. § 112(a), enablement is separate and distinct from the written-description requirement. Ariad, 598 F.3d at 1344. “The test of enablement is whether one reasonably skilled in the art could make or use the invention from the disclosures in the patent coupled with information known in the art without undue experimentation.” United States v. Telectronics, Inc., 857 F.2d 778, 785 (Fed. Cir. 1988). “[A] patent specification complies with the statute even if a ‘reasonable’ amount of routine experimentation is required in order to practice a claimed invention.” Enzo Biochem, Inc. v. Calgene, Inc., 188 F.3d 1362, 1371 (Fed. Cir. 1999). Whether undue experimentation is needed is not a single, simple factual determination, but rather is a conclusion reached by weighing many factual considerations. In re Wands, 858 F.2d 731, 737 (Fed. Cir. 1988). These factors, referred to as the Wands factors, include: (1) the quantity of experimentation necessary, (2) the amount of direction or guidance presented, (3) the presence or absence of working examples, (4) the nature of the invention, (5) the state of the prior art, (6) the relative skill of those in the art, (7) the predictability or unpredictability of the art, and (8) the breath of the claims. Wands, 858 F.2d at 737. It is Petitioner’s burden to show by a preponderance of the evidence that the claims of the ’989 patent lack enablement. 35 U.S.C. § 326(e). Petitioner’s evidence and argument does not sufficiently establish that the ’989 patent fails to teach those in the art to make and use the claimed invention without undue experimentation. See PO Resp. 58–66. The Petition does not address the Wands factors sufficiently so as to show that undue experimentation is required to make or use the claimed invention. For example, neither the Petition nor Dr. Pearce sufficiently addresses the state of the prior art or the relative skill of those in the art. See Pet. 64–65; Ex. 1002 ¶¶ 145–152; PO Resp. 62. As Patent Owner argues, this is an “omission[] that [is] particularly fatal” to Petitioner’s enablement argument, because Petitioner argues that mechanical expansion and inflation expansion are incompatible and cannot be combined. PO Resp. 62; see Pet. 30–38, 64. Dr. Grundfest, however, testifies that it was well known to combine mechanical and balloon-based expansion in surgical devices. Ex. 2005 ¶¶ 132–136; PO Resp. 56. During cross-examination, Dr. Pearce testified that he “thought about the state-of-the-art in minimally invasive surgery during the 1990s.” Ex. 2003 18:1–14. Dr. Pearce’s testimony is conclusory and does not sufficiently address whether he considered whether it was well known to combine mechanical expansion and inflation expansion in surgical devices. For another example, relying upon the testimony of Dr. Pearce, the Petition asserts that a redesign of the expansion design disclosed in the ’989 patent “would take a substantial amount of time and cost to achieve.” Pet. 65 (citing Ex. 1002 ¶ 149). Likewise, Dr. Pearce testifies, “[s]uch a redesign would take a substantial amount of time and cost to achieve.” Ex. 1002 ¶ 149. Dr. Pearce, however, does not explain sufficiently why combining mechanical expansion and inflation expansion would require a substantial amount of time and cost. See id. For these reasons, we determine that Petitioner has not met its burden of showing by a preponderance of evidence that claims 1–19 are unpatentable under 35 U.S.C. § 112(a) for lack of enablement.” slip op. at 33
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Factors that may be considered in determining level of ordinary skill in the art include: (1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007) (quoting Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696 (Fed. Cir. 1983)). We are not persuaded that Dr. Pearce’s testimony concerning the level of skill in the art is erroneous to the extent it does not explicitly require experience related to devices used for uterine surgical procedures or surgical devices that employ expandable inflation-based and mechanical-based components. Patent Owner’s argument and Dr. Grundfest’s testimony is inconsistent with the ’989 patent, which does not disclose an ablation device or method of using an ablation device that solves problems unique to endometrial ablation or unique to surgical devices that employ expandable inflation-based and mechanical-based components. The ’989 patent does not limit the art to be “the field of minimally invasive surgical and uterine devices” (Ex. 2005 ¶ 60). The ’989 patent states: “The present invention relates generally to the field of apparatuses and methods for ablating or coagulating the interior surfaces of body organs. Specifically, it relates to an apparatus and method for ablating the interior linings of body organs such as the uterus and gallbladder.” Ex. 1001, 1:20–24; see also id. at 2:36–38 (“The present invention is an apparatus and method of ablation and/or coagulating tissue, such as that of the uterus or other organ”).” slip op. at 16
Patent outcomesUS 9,247,989 unpatentable§ 112 disclosurePatents in suitUS 9,247,989 - Captioncall, L.L.C. / Sorenson Communications, Inc. v. Ultratec, Inc.All claims unpatentablePTAB · Sep 7, 2016 · IPR2015-00637 · APJ William V Saindon · IPR · Final written decision
Claims 1–30 are unpatentable as obvious; Patent Owner’s contingent motion to amend is denied for lack of written-description support and indefiniteness.
RulingsFinal written decision- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“admitted that the patented features of voice and revoiced text are responsible for ‘giv[ing] the phone back to folks with hearing loss.’” PO Resp. 48 (emphasis added). Thus, Patent Owner is offering the statement for the truth that voice and re-voiced text gives the phone back to folks with hearing loss. Patent Owner’s argument that Mr. Puzey was discussing the existence of features in his company’s product rather than features in Patent Owner’s product does not change that his statement is offered as proof regarding an alleged long-felt need for the features. Accordingly, his testimony is hearsay. slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“art is telecommunication systems. Thus, a [POSA] is a person familiar with at least that technology by way of background and/or experience.” CaptionCall, LLC v. Ultratec, Inc., Case IPR2013-00549, Paper 71, 13 (Final Written Decision) (PTAB 2015); see also CaptionCall, LLC v. Ultratec, Inc., Case IPR2013-00780, Paper 35, 9 (Final Written Decision) (PTAB 2015) (reaffirming our finding in IPR2013- 00549). Patent Owner states that it “does not agree” with that definition of a person of ordinary skill in the art, and that, “without waiving the foregoing objection and reserving all rights,” states that it will “appl[y]” our prior definition of a person of ordinary skill in the art “for purposes of this Response.” PO Resp. 3. By not setting forth arguments advocating a particular definition of the level of ordinary skill in the art, and by applying our prior definition, Patent Owner has waived arguments for any other definition. Accordingly, we adopt Petitioner’s proposed level of ordinary skill in the art, as expressed by its declarant, Mr. Occhiogrosso. Ex. 1009 ¶¶ 26–27. This person typically has “a bachelor’s degree” slip op. at 35
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“understand a “communication link,” as claimed, to refer to the “communication line” described in the specification. In particular, the link is “intended not only to apply to a traditional land-line . . . but also to all equivalents that offer similar functionality.” Id. at 8:60–63. A link could be “a portion of the bandwidth” of a particular connection, such that a single mode of connection (e.g., IP) could carry out two types of communication (voice and text), with each type corresponding to a different “communication link.” See id. at 8:44–47, 8:63–65. For example, as explained in the ’838 patent, “[e]ach of the telephone lines could be . . . a portion of the bandwidth of an ISDN or DSL service.” Id. at 8:53–65. Accordingly, we adopt Petitioner’s construction of “communication link” as “any communication session, protocol, link, connection, or path distinguishable from [another] communication link[].”” slip op. at 22
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“3. Combination of References As we discussed above, Petitioner’s combination takes the two-line” slip op. at 43
Patent outcomesUS 8,908,838 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSRPatents in suitUS 8,908,838
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.