- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - PTAB · Nov 14, 2024 · PGR2024-00026 · APJ Hyun J Jung · PGR · Institution
Instituted PGR on claims 1–7 and all grounds because Petitioner showed it was more likely than not that at least one challenged claim lacks written-description support.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this stage, Petitioner’s arguments, cited portions of the Specification, and supporting testimonial evidence demonstrate that it is more likely than not that claims 1–7 are unpatentable.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateDecided for petitioner
“patent describes that “angular position transducer 78 is placed on top of swing leg pivot shaft 24” and that “pivot shaft 24 is rotationally fixed to the connector plate and duplicates the angular movements of swing leg 20 about the pivot shaft.” Ex. 1001, 12:15–16, 12:20–22, Figs. 5, 7. The ’723 patent also describes that “[a]ngular position transducer 78 is mounted inside . . . protective can 90 . . . which is bolted to hinge bracket 28 via an upright holding arm 92” and that “trigger pin 94 projects upwardly from the top surface of pivot shaft 24 and cooperates with angular position transducer 78 to generate an angular position signal.” Id. at 12:28–33, Fig. 5. These descriptions expressly convey that angular position transducer 78 is on pivot shaft 24 and mounted inside protective can 90 that is bolted to hinge bracket 28. Id. at 12:15–16, 12:20–22, 12:28–30, Figs. 5, 7; see also Prelim. Resp. 17 (describing the same embodiment shown in Figs. 5 and 7). According to Petitioner, the ’723 patent describes the pivot shaft as part of the hinge bracket, not the modular frame or swing leg. Pet. 109–110 (citing Ex. 1001, 7:42–46, 12:17–22). On the preliminary record, we agree because the cited portions of the Specification describe that a “hinge bracket is interposed between each swing leg and an associated surface of the bolsters and includes a fixed, upright pivot shaft that pivotally engages the swing leg for pivotal movements” and “pivot shaft 24 is rotationally fixed to the connector plate.” Ex. 1001, 7:42–45, 12:20–21. We also agree that “even if one were to find that the hinge bracket is part of either the modular frame or swing leg (contrary to the claims and specification treating these all as separate components), the specification would only provide written description for one of the claimed alternatives.” Pet. 110 (citing Ex. 1002 ¶ 199).” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this preliminary stage, we determine that express claim interpretation is not necessary to determine whether it is more likely than not that at least one of the claims challenged in the petition is unpatentable. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We will also not use our discretion under § 325(d) to deny the Petition based on arguments previously presented in IPR2021-00135, because Petitioner relies on a Board determination regarding claim 8 from IPR2021- 00136, not arguments previously made for claim 1 in IPR2021-00135. Pet. 111–115, 119; Prelim. Resp. 8–9; Prelim. Sur-reply 5. Furthermore, we determined the effective filing date of claim 8 of the ’571 patent without deciding, that other challenged claims, such as claim 1, were entitled to their earliest possible effective filing date. See Godberson-Smith, Paper 61 at 11, 12.” slip op. at 12
Claim construction§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,772,723 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - PTAB · May 20, 2024 · IPR2024-00114 · APJ Jon M Jurgovan · IPR · Institution
The Board instituted IPR on claims 1–8 on all asserted grounds, finding a reasonable likelihood that at least one claim would have been obvious over DiPerna964 and Strack.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“We determine below that Fintiv factors 1–5 do not favor discretionary denial. Thus, we do not reach the issue of whether the merits are compelling. CommScope Techs. LLC v. Dali Wireless, Inc., IPR2022- 01242, Paper 23 at 4–5 (PTAB Feb. 27, 2023) (precedential) (Board must first address Fintiv factors 1–5, and should engage the compelling merits question only if that analysis favors discretionary denial) (“CommScope”). 7. Balancing the Fintiv Factors Weighing against exercising our discretion to deny institution is factor 3 involving the parties’ limited investment and lack of substantive orders in the District Court litigation. Factor 4 concerning the limited overlap of the issues in the two cases also weighs against discretionary denial. Only factor 5, that Petitioner and the defendant in the District Court litigation are the same party, weighs in favor of discretionary denial. Factor 1 concerning the absence of a stay in the District Court litigation, and factor 2 concerning the close proximity between the start of trial in the District Court litigation and the estimated deadline for the final written decision, are neutral on the facts of this case. We therefore determine that the balance of factors 1–5 weighs against discretionary denial. Accordingly, we do not consider the issue of whether compelling merits have been shown under factor 6. See CommScope, Paper 23 at 4–5.2” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Pet. 9 (citing Ex. 1006, 23) (emphasis added). From this passage, we understand the “safety” switch to be “separate” from the panic button, not a part of it. This understanding is reinforced by claim 7 which depends from claim 1 and recites that the mobile device “further compris[es] a safety switch,” meaning it is a separate element from the panic button. Ex. 1001, 9:3–4. Thus, moving the safety switch into position readies the panic button, which is not the same as the panic button readying itself to perform functions in claims 1–8 of the ’404 patent. Patent Owner does not sufficiently address this issue in its assertions. See Prelim. Resp. 5–7. Patent Owner’s reliance on disclosures elsewhere in the ’404 patent is likewise not persuasive. Prelim. Resp. 5–6. For example, the ’353 application mentions “ready” in relation to using a self-defense mechanism such as pepper spray, which has not been shown to be related to the panic button. Ex. 1006, 5, 9–10. Although Patent Owner relies on the ’353 application’s description of voice activation using a codeword, voice activation does not ready the panic button for activation to perform functions, but actually activates the panic button to perform those functions. Prelim. Resp. 6 (citing Ex. 1006, 17). Petitioner thus met its burden here to demonstrate that claims 1–8 of the ’404 patent lack written description support for a panic button adapted to “ready itself” to perform the recited functions because the limitation is not present in the ’353 application to which the ’404 patent claims priority. Pet. 8–10. The burden of production thus shifted to Patent Owner to demonstrate that the ’353 application has written description support for this limitation, which it has not done on this record. Prelim. Resp. 5–7.” slip op. at 17
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“of the proceeding, we are persuaded that Petitioner has demonstrated a reasonable likelihood of prevailing on its assertions that at least one of claims 1–8 of the ’404 patent would have been obvious under 35 U.S.C. § 103 based on the ground set forth in the Petition. Accordingly, we institute trial for all challenged claims on all grounds asserted by Petitioner. See SAS Institute Inc. v. Iancu, 138 S. Ct. 1348 (2018). Our factual findings, conclusions of law, and determinations at this stage of the proceeding are preliminary, and based on the evidentiary record developed thus far. At this stage of the proceeding, we have not made a final determination with respect to the patentability of the challenged claims or to the construction of any claim term. V. ORDER For the foregoing reasons, it is ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of claims 1–8 of the ’404 patent is hereby instituted on all challenges to patentability set forth in the Petition; and” slip op. at 31
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner has shown sufficiently that a POSITA would have combined DiPerna964 and Strack with a reasonable expectation of success. Pet. 16–18. DiPerna964 and Strack are directed to similar mobile devices for use in security and emergency situations. Id. at 16–17. Petitioner demonstrates sufficiently that a POSITA would have regarded Strack’s arming and timer technique as an improvement that would have been useful with DiPerna964’s mobile device (at least in some circumstances) to provide the user with additional time to evaluate whether triggering the 911 call is warranted. Id. at 17–18. This amounts to the use of a known technique to improve similar devices in the same way, which is a recognized rationale for combining prior art references. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 401, 417 (2007). Accordingly, on this record, Petitioner has presented a reasonable likelihood that a POSITA would have combined DiPerna964 and Strack with a reasonable expectation of success. Pet. 16–18.” slip op. at 22
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,265,404 - Crusoe Energy Systems, LLC v. Upstream Data Inc.Institution deniedPTAB · Mar 29, 2024 · PGR2023-00052 · APJ Matthew S Meyers · PGR · Institution
Institution was denied because Petitioner did not show it was more likely than not that claims 1–41 were unpatentable under any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 324 (2018); 37 C.F.R. § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). Section 324(a) provides that a post-grant review may not be instituted “unless . . . the information presented in the petition . . . , if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Upon considering the Petition, Preliminary Response, and the cited evidence, we conclude that Petitioner has not satisfied its burden under 35 U.S.C. § 324 to show that it is more likely than not that claim 1 is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner disagrees with Petitioner’s articulation of the level of ordinary skill in the art, but does not offer a definition of its own. Prelim. Resp. 5. According to Patent Owner, “[t]his Petition and related declaration propose two alternative levels of ordinary skill in the art, where the second alternative does not require any formal education or any experience in the field of oil or gas production.” Id. While Patent Owner disagrees with Petitioner’s characterization of the level of ordinary skill in the art, Patent Owner does not explain how a different level of skill is likely to alter Petitioner’s analysis. Instead, Patent Owner contends that it “applied Petitioner’s articulation and confirmed the analysis detailed below would not change based on disagreements over the level of ordinary skill in the art.” Id. (citing Ex. 2101 ¶¶ 16–17). 8 To the extent necessary, and for purposes of this Decision, we accept Petitioner’s statement on the level of skill in the art. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007) (listing the type of problems encountered in the art, prior art solutions to those problems, and the sophistication of the technology as factors that may be considered in determining the level of ordinary skill in the art). The prior art itself may be sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima, 261 F.3d at 1355 (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Because the meanings of the claim terms “blockchain mining devices,” “mining processor,” and “adapted to mine transactions” are inextricably linked with Petitioner’s indefiniteness grounds, we will address the meaning of those terms in the context of the parties’ arguments to the extent necessary to resolve the controversy as set forth below in Section III.C. Similarly, we will address the parties’ arguments regarding the disputed means-plus-function limitations in our discussion of 35 U.S.C. § 112(f) as set forth below in Section III.E. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Disclosure Requirements (§112) › Definiteness (Nautilus)Not shown unpatentable
“To satisfy the definiteness requirement of § 112(b), a patent’s claims must, when “viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable certainty.” Nautilus, 572 U.S. at 910. We are not persuaded that the Petition shows that it is more likely than not that Petitioner would prevail in demonstrating that the term “blockchain mining devices,” as recited by independent claims 1 and 24, is indefinite. As an initial matter, we agree with Patent Owner that “Petitioner’s indefiniteness theory is flawed because its ‘alternative interpretations’ are of its incorrect claim construction rather than the claim language in view of the specification as required by Nautilus.” Prelim. Resp. 13. We find the Specification informs, with reasonable certainty, those skilled in the art about the meaning of the term “blockchain mining devices.” The 18 Specification informs us that “each blockchain mining device 12 may be composed of suitable components. The blockchain mining device 12 may have a network interface, such as network equipment 88, and one or a plurality of mining processors 92 (92A-92E for example).” Ex. 1001, 15:21–25. And, claim 1 recites that the “blockchain mining devices [are] connected to the generator” and “each have a mining processor and are connected to a network interface.” Id. at 19:59–62. Thus, reading the term “blockchain mining devices” in light of the language of the claim and the Specification, an ordinarily skilled artisan would have understood “blockchain mining devices” to mean a device composed of, for example, a network interface and one or more processors. Id. at 15:21–25, 19:59–62.” slip op. at 18
Claim construction§ 112 disclosureDiscretionary denialPatents in suitUS 11,574,372 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.
RulingsInstitution decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37
- Other 314aDecided for petitioner
“B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40
§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Institution
Instituted IPR on claims 1–16 because Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–16 of the ’923 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995). One may show support for the claims of a later application by showing that a single, earlier application provides written description support for the claims. PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); Studiengesellschaft Kohle, MBH v. Shell Oil Co., 112 F.3d 1561, 1564 (Fed. Cir. 1997) (noting that a patentee “cannot distinct previous applications”). Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner
“Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“7. Analysis: Reasons to Combine the References Petitioner shows sufficiently that Yoakim, Jarisch and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/espresso machines.” Pet. 43. “Yoakim and Jarisch both improve the optimization of beverage parameters in a single-serve brewing system, and use optical codes read by the machine to achieve this.” Id. “Rapparini further improves the the wall of the capsule body like those used in Yoakim and Jarisch.” Id. at 43–44; see id. at 50–51, 53–54 (Petitioner’s further argument that Rapparini discloses “an optimized capsule structure that is stiffer and more stable” by virtue of radially spaced and vertically oriented ribs and grooves, where the vertically oriented grooves are free from extending entirely to the bottom region of the capsule). Petitioner directs us to additional evidence tending to establish that an ordinarily skilled artisan would have been prompted to modify Yoakim’s device, to include the code placement of Jarisch and the grooves and ribs of Rapparini, to arrive at the claimed invention with an expectation of success. Id. at 44–48.” slip op. at 27
§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites PhillipsPatents in suitUS 10,994,923 - PTAB · Jun 20, 2023 · PGR2023-00008 · APJ Kristina M Kalan · PGR · Institution
The Board instituted post-grant review of claims 1–13 on all petitioned grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute post-grant review, we must determine that the information presented in the Petition, “if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one of the challenged claims of the ’624 patent is unpatentable. Thus, we institute post-grant review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“evaluated the subject matter of Riis during examination of the ’624 patent, we agree that Riis was before the Office, as discussed in connection with our analysis of the first part of the Advanced Bionics framework, above. Examiner T presumably was aware of Riis by virtue of having initialed an IDS containing Riis in the ’624 patent’s application and also by virtue of having initialed an IDS containing Riis in the ’067 Application, but Examiner T did not apply Riis in connection with the examination of the ’624 patent. On this record, Patent Owner also fails to show that the claims of the child application leading to the ’624 patent are substantially similar to those of the parent ’814 patent in which Examiner S considered Riis, and, thus, consideration of Riis during the prosecution of the ’814 patent does not equate to consideration of Riis during the prosecution of the ’624 patent. Regarding Patent Owner’s argument (2) that Petitioner fails to sufficiently show how the Examiner erred in evaluating the prior art, we find Petitioner’s arguments demonstrate that Examiner T, the examiner of the ’624 patent, did not apply Riis (or Wypych or Tatarka) during the examination of the’624 patent. As Petitioner argues, the error lies in that “the Examiner failed to consider the relevance of Riis as it applied to the pending method claims,” because although “Riis was considered during examination of the parent ’999 application, Riis was not similarly considered during examination of the ’018 application which led to the ’624 patent.” Pet. 76–77. We determine that the circumstances here demonstrate that the Examiner erred in evaluating the prior art.” slip op. at 12
- PTAB / AIA Trials › Real party in interest / privityNot reached
“35 U.S.C. § 322(a)(2) to deny institution, arguing that the Petition fails to identify every RPI. Prelim. Resp. 10–11, 56–60. Patent Owner argues that the Petition “should also have identified its parent corporation, Huhtamäki Oyj . . . as well as the related corporation Huhtamaki, Inc. . . . as RPIs to comply with the statutory requirements for a PGR.” Id. at 10. On this record, we determine that we need not address whether Huhtamäki Oyj and Huhtamaki, Inc. are unnamed RPIs because, even if they were, it would not create a time bar or estoppel under 35 U.S.C. § 325. See SharkNinja Operating LLC v. iRobot Corp., IPR2020-00734, Paper 11 (PTAB Oct. 6, 2020) (precedential); Lumentum Holdings, Inc. v. Capella Photonics, Inc., IPR2015-00739, Paper 38 at 6 (PTAB Mar. 4, 2016) (precedential) (Board’s jurisdiction to consider a petition does not require a “correct” identification of all RPIs in a petition); see also Blue Coat Sys., Inc. v. Finjan, Inc., IPR2016-01444, Paper 11 at 10 (PTAB July 18, 2017) (“evidence [of failure to identify all RPIs] is, at best, suggestive regarding an issue that is not jurisdictional”); Mayne Pharma Int’l Pty. Ltd. v. Merck Sharp & Dohme Corp., 927 F.3d 1232, 1240 (Fed. Cir. 2019) (“[I]f a petition fails to identify all real parties in interest . . . the Director can, and does, allow the petitioner to add a real party in interest.” (quoting Wi-Fi One, LLC v. Broadcom Corp., 878 F.3d 1364, 1374 n.9 (Fed. Cir. 2018) (en banc))). Here, notwithstanding the arguments devoted to the RPI issue in the Preliminary Response, Preliminary Reply, and Preliminary Sur-Reply, we are not persuaded that Petitioner is barred or estopped from this proceeding, or that Petitioner purposefully omitted Huhtamäki Oyj or Huhtamaki, Inc. to gain some advantage. As Petitioner argues, the “RPI analysis is not necessary at institution, because Patent Owner has not alleged Petitioner would be time barred or otherwise estopped based on unnamed RPIs.” Prelim. Reply 5 (quoting SharkNinja, IPR2020-00734, Paper 11 at 18). As SharkNinja states, certain Board decisions go through extensive analysis to determine whether parties should have been named as RPIs, whereas other Board decisions determine that “such a lengthy exercise is unnecessary for the purposes of rendering a decision on institution of trial.” SharkNinja, IPR2020-00734, Paper 11 at 19. Here, as in SharkNinja, we find the latter approach better serves the interest of cost and efficiency. Thus, at this time and on this record, we will not consider whether Huhtamäki Oyj or Huhtamaki, Inc. must be named as RPIs.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“of the invention “would have had a relevant technical degree in Chemical Engineering, Polymer Science, Materials Science, or the like, and 2–3 years of experience in laminate or film manufacture or similar packaging manufacture and that less experience may be necessary with additional education and vice versa.” Pet. 17 (citing Ex. 1003 ¶¶ 66–72). In its 4 Neither Patent Owner nor Petitioner appear to present any evidence directed to secondary considerations. See generally Pet.; Prelim. Resp.; Prelim. Reply; Prelim. Sur-Reply. Preliminary Response, Patent Owner does not contest Petitioner’s asserted level of ordinary skill in the art. See generally Prelim. Resp. We adopt Petitioner’s definition, which is consistent with the level of skill in the art at the time of the invention as reflected by the prior art and the ’624 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 17
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham · NautilusPatents in suitUS 11,260,624
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.