- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Therabody, Inc. v. Hyperice IP Subco, LLCNo claims unpatentablePTAB · May 11, 2026 · PGR2025-00013 · APJ Alyssa A Finamore · PGR · Final written decision
Claims 1–16 and 18 were not shown unpatentable because the asserted prior art did not establish the claimed quick-connect system during reciprocation, and Clark was not analogous art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill in the Art The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The prior art may reflect the level of ordinary skill in the art. Id.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“During oral argument, Petitioner confirmed it would not object to the Board adopting the construction that Petitioner proposes in the district court litigation. JUDGE MARSCHALL: I think the Petitioner wouldn’t object if we adopted the construction that Petitioner proposed in the district court, especially the “designed to” construction, correct? MR. BERG: No. We wouldn’t object to that. And we think that our Petition is on all fours with that construction. Tr. 81:12–16. As Petitioner does not object to adopting its construction from the district court litigation, we construe claim element 1[e] in accordance with Petitioner’s construction from the district court litigation.” slip op. at 11
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable
“The invention, a reciprocating massage device, is in a predictable field, namely the electro-mechanical arts. Also, there is no evidence that the recited quick-connect system is complex, even considering Patent Owner’s alleged understanding of it. Rather, Dr. Pratt testifies that many different types of connectors, whether they require alignment or not, were known. Ex. 1002 ¶¶ 54–58. Given the predictability of the electro-mechanical arts and lack of complexity of the recited quick-connect system, a low level of detail is required to satisfy the written description requirement. See RAI Strategic Holdings, Inc. v. Philip Morris Prods. S.A., 92 F.4th 1085, 1090 (Fed. Cir. 2024) (“Given the predictability of electro-mechanical inventions such as the one at issue here, and the lack of complexity of the particular claim limitation at issue—i.e., reciting the length of a heating member—‘a lower level of detail is required to satisfy the written description requirement than for unpredictable arts.’” (quoting Hologic, Inc. v. Smith & Nephew, Inc., 884 F.3d 1357, 1361 (Fed. Cir. 2018)). In view of the low level of detail required to satisfy the written description requirement, Petitioner has not persuaded us that the Specification’s example of a quick-connect system configured to secure the massaging head as the piston reciprocates fails to provide sufficient written description support for the “quick-connect system” recited in independent claims 1 and 18.” slip op. at 14
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteNot shown unpatentable
“Contrary to Petitioner’s assertion, the Specification provides guidance as to what amount of deviation from a perfect cylinder is still “substantially cylindrical.” The Specification describes: Quick-connect system 600 includes a piston 602 that has a hollow-end bore 608 for receiving the shaft 621 of a massaging head 620. Located within the bore 608 of piston 602 is a cylindrical seat 604. Cylindrical seat 604 retains a magnet 606. Magnet 606 is illustrated with its north pole located flush with the seat and facing toward the opening in bore 608. Massaging head 620 includes a shaft 621 having a cylindrical pocket 622 at the distal end. Located within the cylindrical pocket 622 is a magnet 624. Magnet 624 is positioned so that its south pole is located at the distal end of shaft 621. Accordingly, when the shaft 621 of massaging head 620 is slid into opening in bore 608, the magnets 606 and 624 are attracted to one another and magnetically hold massaging head 620 firmly in place. Ex. 1001, 6:57–7:3. In view of the description of quick-connect system 600, the Specification sets forth a standard for ascertaining whether the bore and the seat located within the bore are “substantially cylindrical.” To wit, the bore and the seat within the bore are “substantially cylindrical” when the massaging head and magnet are respectively received therein so that the magnet in the seat and the magnet in the pocket of the massaging head can magnetically hold the massaging head firmly in place. Furthermore, Dr. Pratt testifies that “[m]agnetic connectors comprise a magnet on at least one of the two objects to be joined. These types of connectors are ubiquitous even today for driving threaded fasteners.” Ex. 1002 ¶ 56. Dr. Pratt also testifies that a POSITA would understand how to take into account certain variances, like runout. Ex. 2033, 25:3–17. Dr. Pratt’s testimony shows that magnetic connectors are well known and that a POSITA would be able to determine whether the bore and the seat within the bore were “substantially cylindrical” for a secure connection of the massaging head. In view of the foregoing, Petitioner has not persuaded us that the claim term “substantially cylindrical” recited in claims 13–16 fails to inform, with reasonable certainty, the shapes of the bore and the structure within the bore. Petitioner has not proven, by a preponderance of the evidence, that any of claims 13–16 are unpatentable under 35 U.S.C. § 112(b) as indefinite.” slip op. at 19
Patent outcomesUS 11,938,082 not shown unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 11,938,082 - Therabody, Inc. v. Hyperice IP Subco, LLCNo claims unpatentablePTAB · Apr 20, 2026 · PGR2024-00053 · APJ Alyssa A Finamore · PGR · Final written decision
Petitioner did not prove claims 34–38, 40, 41, 43–46, and 58–60 unpatentable under § 112(a), § 112(b), or any asserted § 103 ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties’ proffered definitions for the level of ordinary skill in the art differ in the details of the experience a POSITA would possess. Petitioner’s definition requires experience with rotating or reciprocating mechanisms, whereas Patent Owner’s definition requires experience with devices for human use and interaction. These differences, however, do not affect our analysis of the issues in this case. For purposes of this Decision, we adopt Petitioner’s definition of level of ordinary skill in the art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“During oral argument, Petitioner confirmed it would not object to the Board adopting the construction that Petitioner proposes in the district court litigation. JUDGE MARSCHALL: I think the Petitioner wouldn’t object if we adopted the construction that Petitioner proposed in the district court, especially the “designed to” construction, correct? MR. BERG: No. We wouldn’t object to that. And we think that our Petition is on all fours with that construction. Tr. 81:12–16. As Petitioner does not object to adopting its construction from the district court litigation, we construe claim element 34[e] in accordance with Petitioner’s construction from the district court litigation.” slip op. at 10
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable
“The invention, a reciprocating massage device, is in a predictable field, namely the electro-mechanical arts. Also, there is no evidence that the recited quick release connector is complex, even considering Patent Owner’s alleged understanding of it. Rather, Dr. Pratt testifies that a POSITA would be able to recognize a quick release connector for a particular application. According to Dr. Pratt, A person of ordinary skill in the art would consider a number of factors, depending on the context and specific application of the connector, to determine whether a connector provides a “quick release.” Such factors could include whether the connector is designed to manually and easily connect and disconnect two objects, and whether tools are necessary to do so. Other factors to be considered may be based on the specific application or operating environment. Ex. 1002 ¶ 58. Given the predictability of the electro-mechanical arts and lack of complexity of the recited quick release connector, a low level of detail is required to satisfy the written description requirement. See RAI Strategic Holdings, Inc. v. Philip Morris Prods. S.A., 92 F.4th 1085, 1090 (Fed. Cir. 2024) (“Given the predictability of electro-mechanical inventions such as the one at issue here, and the lack of complexity of the particular claim limitation at issue—i.e., reciting the length of a heating member—‘a lower level of detail is required to satisfy the written description requirement than for unpredictable arts.’” (quoting Hologic, Inc. v. Smith & Nephew, Inc., 884 F.3d 1357, 1361 (Fed. Cir. 2018)). In view of the low level of detail required to satisfy the written description requirement, Petitioner has not persuaded us that the Specification’s example of a quick release connector configured to secure the massaging head as the piston reciprocates fails to provide sufficient written description support for the “quick release connector . . . configured to secure a first massaging head while the piston reciprocates a predetermined stroke length at the first speed” recited in claim element 34[e]. 4. Conclusion for Written Description For the reasons set forth above in sections II.C.1–3, Petitioner has not persuaded us that any aspect of claim element 34[e] lacks written description support. Petitioner has not proven, by a preponderance of the evidence, that independent claim 34, as well as any of claims 35–38, 40, 41, 43–46, and 58–60 depending therefrom, are unpatentable under 35 U.S.C. § 112(a).” slip op. at 18
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteNot shown unpatentable
“Contrary to Petitioner’s assertion, the Specification provides guidance as to what amount of deviation from a perfect cylinder is still “substantially cylindrical.” The Specification describes that quick-connect system 600 includes two magnets with opposite poles facing each other: magnet 606 in the distal end of piston 602 and magnet 624 located in cylindrical pocket 622 of massaging head 620. Ex. 1001, 6:57–67, Figs. 6, 6A. The Specification further describes that “when the shaft 621 of massaging head 620 is slid into opening in bore 608, the magnets 606 and 624 are attracted to one another and magnetically hold massaging head 620 firmly in place.” Id. at 6:67–7:3. In view of the description of quick-connect system 600, the Specification sets forth a standard for ascertaining whether the pocket is “substantially cylindrical.” To wit, the pocket is “substantially cylindrical” when the pocket receives a magnet therein so that the magnets can magnetically hold the massaging head firmly in place. Furthermore, Dr. Pratt testifies that “[m]agnetic connectors comprise a magnet on at least one of the two objects to be joined. These types of connectors are ubiquitous even today for driving threaded fasteners.” Ex. 1002 ¶ 55. Dr. Pratt also testifies that a POSITA would understand how to take into account certain variances, like runout. Ex. 2033, 25:3–17. Dr. Pratt’s testimony shows that magnetic connectors are well known and that a POSITA would be able to determine whether the pocket was “substantially cylindrical” for a secure connection of the massaging head. In view of the foregoing, Petitioner has not persuaded us that the claim term “substantially cylindrical” recited in independent claim 34 fails to inform, with reasonable certainty, the shape of the pocket. Petitioner has not proven, by a preponderance of the evidence, that independent claim 34, as well as claims 35–38, 40, 41, 43–46, and 58–60 depending therefrom, are unpatentable under 35 U.S.C. § 112(b) as indefinite.” slip op. at 21
Patent outcomesUS 11,857,482 not shown unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 11,857,482 - Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentablePTAB · Jan 7, 2026 · PGR2024-00043 · APJ Ryan H Flax · PGR · Final written decision
Claims 1–39 are unpatentable under Grounds 1–10; Petitioner did not prove lack of enablement under Ground 11, and Patent Owner’s motion to exclude was denied.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“REAL PARTIES-IN-INTEREST Petitioner identifies Avation Medical, Inc. as the real party-in-interest. Pet. x. Patent Owner identifies EMKinetics, Inc. as the real party-in-interest. Paper 5, 1; Paper 6, 1. Neither party contests the other’s assertions on this. C.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSA at the time of the claimed invention would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices. Additional work experience could substitute for a formal degree and vice versa. Ex.1003, ¶21. Pet. 20 (citing Ex. 1003). Patent Owner does not contest this proposed definition or offer an alternative. See generally Resp. We accept and use Petitioner’s uncontested definition of the ordinarily skilled artisan, which appears to comport with the level of skill in the art reflected in the prior art of record and the ’943 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may]” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.200(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner states that, “no terms require construction for purposes of this Petition.” Pet. 21. Patent Owner presents no express position on claim construction. See generally Resp. We do not expressly construe any claim terms. E.” slip op. at 20
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner
“question, based on factual findings. VidStream, 981 F.3d at 1063–64. Moreover, public accessibility is the touchstone in determining whether a reference is a printed publication and such depends on whether the reference was available to interested, ordinarily skilled persons exercising reasonable diligence, which is determined on a case-by-case basis. Id. at 1065. Particularly pertinent here is that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” Id. Hulu (which cites VidStream on this issue) concerned, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. Hulu, 2021 WL 487622. Hulu holds that, although testimonial evidence is one way to prove public accessibility, there are also a variety of hallmarks of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at *10–13, 21. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established, and whether the reference’s “purpose of publishing . . . was ‘dialogue with an intended audience.’” Id. at *10–21 (citing Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)).” slip op. at 30
Patent outcomesUS 11,844,943 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,844,943 - PTAB · Dec 10, 2025 · PGR2025-00054 · APJ Ryan H Flax · PGR · Institution
The Board instituted PGR on claims 1–16 on all four grounds, finding at least one claim more likely than not unpatentable based on obviousness, indefiniteness, or lack of written description.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in a post-grant review. We institute a post-grant review only if the information presented in the petition filed under 35 U.S.C. § 321, if unrebutted, shows that it is more likely than not that at least one claim challenged in the petition is unpatentable. 35 U.S.C. § 324. On the existing record, we conclude that Petitioner demonstrates it is more likely than not that Petitioner would prevail in showing that at least one challenged claim of the ’781 patent is unpatentable under a presented ground. See generally Pet. Therefore, we grant institution of post-grant review. Our reasoning is discussed below.” slip op. at 2
- PTAB / AIA Trials › Real party in interest / privityDecided for petitioner
“STANDING Petitioner states that it certifies that: (1) the ’781 patent is available for post grant review because its earliest claimed effective filing date is October 9, 2018, and the patent issued less than nine months ago, on December 3, 2024; and (2) Petitioner is not barred or estopped from requesting a post grant review on the grounds in this petition. Pet. 5. This is sufficient. See 35 U.S.C. § 100(note)(A)–(B), § 321; 37 C.F.R. § 42.204(a). Patent Owner does not contest standing. See generally Prelim. Resp. B. REAL PARTIES-IN-INTEREST Petitioner states that “[t]he real parties-in-interest are Petitioner Straumann USA, LLC and its affiliates Institut Straumann AG and JJGC Indústria e Comércio de Materiais Dentários S.A.” Pet. 3. Patent Owner raises no objection and itself identifies “Smart Denture Conversions, LLC is the real party-in-interest.” Paper 4, 2; see generally Prelim. Resp. C.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 42. And, as set forth above, Patent Owner asserts that, for the sake of its present arguments, it matters not which of the two proposed definitions we use for this proceeding. Prelim. Resp. 21. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’781 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This issue may be further developed at trial by the parties, if desired. C.” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“same claim construction standard that is used to construe patent claims in a civil action in federal district court thus, by default, we give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” 37 C.F.R. § 42.200(b); Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner indicates that None of the claim terms of claims 1–16 need to be construed to determine the patentability issues presented in this petition. The petition applies the ordinary meaning of the claim language as it would be understood by a POSA after reading the ’781 patent. Ex. 1002, ¶130. Petitioner will propose a construction if Patent Owner argues or the Board determines that one is required for any term. Pet. 31 (citing Ex. 1002). And, Patent Owner presents no express position on claim construction at this point. See generally Prelim. Resp. At this stage of the proceeding, we do not expressly construe any claim terms; however, this position is preliminary and we may change it based on the fully developed record at trial.8 D.” slip op. at 19
Claim construction§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 12,156,781 - PTAB · Nov 21, 2025 · IPR2025-00956 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–12 under all asserted grounds, finding a reasonable likelihood that at least one claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in an inter partes review. We institute an inter partes review only if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’992 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“These two proposed definitions of the ordinarily skilled artisan share many consistencies, for example, the types of degrees and experience such a person would have had, but differ in the number of years of experience. Petitioner proposes the ordinarily skilled artisan would have had at least five years of experience and Patent Owner proposes at least three years (which would necessarily include five years, too). Patent Owner also proposes that the ordinarily skilled artisan would have consulted a dentist, oral surgeon, prosthodontist, or periodontist with experience in dental implants and prosthetics. At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 40. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’992 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This parties may further developed this issue at trial, if desired. C.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.100(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc).” slip op. at 14
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“Here, the first claim limitation at issue is broad, i.e., different thread pattern/profile between a definite and a temporary screw, and the Specification’s and priority applications’ disclosure is narrow and specific, asymmetric buttress style threads in a temporary screw and symmetrical threads in a definite screw (are different). Any apparent predictability in or maturity of the relevant field here must be contrasted with the fact that the Specification, considering the ’992 patent itself or any of the identified priority applications, never once even discusses the (claimed) concept of specifically differing the thread style between a temporary and a definitive screw. Any differences in thread style are not called out by the disclosure, but are described and can be discerned only in relation to the respective threads’ functionality, i.e., Fig. 75’s temporary screw 190 has buttress-style threading so it can be pulled out rather than unscrewed from the abutment; Fig. 9’s definitive screw 75 has male threads that fill the female threads of the abutment 8 for a secure permanent engagement. Ex. 1001, 15:23–30, 21:25–44, 23:3–36; Ex. 1012, 97–98, Figs. 9, 75. And, although it is possible for a single disclosed species to provide written description support for a claimed genus, “a sufficient description of a genus . . . requires the disclosure of either a representative number of species falling within the scope of the genus or structural features common to the members of the genus so that one of skill in the art can ‘visualize or recognize’ the members of the genus.” Ariad, 598 F.3d at 1350; see also Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). That does not appear to be the case here—the present record does not support that the described asymmetrical buttress, serrated style of different temporary screw threading (relative to that of the definitive screw and regardless of the direction of the threads for rotation) is sufficiently representative of the genus’s “different” thread patterns/profiles. See, e.g., Ex. 1006 (a buttress style thread does not function the same as a buttress reverse or 75º joint profile or rounded, or trapezoidal thread).” slip op. at 30
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,937,992 - Xencor, Inc. v. Merus N.V.InstitutedPTAB · Sep 26, 2025 · IPR2025-00605 · APJ Tawen Chang · IPR · Institution
The Board instituted IPR on claims 1–7 and all petitioned grounds, finding a reasonable likelihood that claim 1 is anticipated by Desjarlais or Moore or obvious over Lazar alone.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“SAS, 138 S. Ct. at 1356. Thus, because we determine, based on the arguments and evidence on the present record, that there is a reasonable likelihood Petitioner would prevail with respect to claim 1, we institute an inter partes review of all challenged claims under each Ground presented in the Petition. Id.; see also 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). III. CONCLUSION For the reasons provided above, we find that Petitioner has demonstrated a reasonable likelihood of showing at trial that at least one of the challenged claims of the ’859 patent is unpatentable under at least one ground. Accordingly, we institute inter partes review of all challenged claims based on all the Grounds presented in the Petition.” slip op. at 49
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“As Petitioner points out, the cited disclosure in the ’935 provisional does not “mention[] positions 364 and 368 together as a pair of positions for potential mutations on two chains.” Pet. 28 (citing Ex. 1002 ¶¶ 109–19). Although Patent Owner is correct that examples or actual reduction to practice are not required for adequate written description and “[a] specification may . . . contain a written description of a broadly claimed 34 invention without describing all species that [the] claim encompasses,” Prelim. Resp. 15 (quoting Ariad Pharms., 598 F.3d at 1352 and Cordis Corp. v. Medtronic AVE Inc., 339 F.3d 1352, 1365 (Fed. Cir. 2003)), the ’935 provisional must still “reasonably convey[] to those skilled in the art that the inventor[s] had possession of the claimed subject matter” as of the relevant date. Regeneron Pharms., Inc. v. Mylan Pharms. Inc., 127 F.4th 896, 914 (Fed. Cir. 2025); Ariad, 598 F.3d at 1351. In this case, Table A of the ’935 provisional discloses a list of CH3 domain interface residues and identifies, for each interface residue in heavy chain A, the contacting residue in the corresponding chain B. Ex. 1030, 17, Table A. Table A does not, however, describe any particular substitutions or pairs of substitutions that should be made to the CH3 domains. See, e.g., Pet. 28 (citing Ex. 1002 ¶¶ 109–119). Table 7 of the ’935 provisional does identify specific amino acid substitutions in CH3 domains, including substitutions resulting in a positively charged residue at position 364 (e.g., S364K) and a negatively charged residue (e.g., L368D) at position 368. Ex. 1030, 52, Table 7. Patent Owner argues that this table “discloses specific positions for ‘identification of novel charge pair mutants.’” Prelim. Resp. 13 (citing Ex. 2010 ¶ 48). As Petitioner points out, however, while Example 13 of the ’935 provisional relates to identification of novel charge pair mutants, Table 7 itself was only a “first step” in this identification process. Ex. 1030, 51:6–17. In this step, “many interface contact residues in the IgG CH3 domain were scanned one by one or in groups for substitutions that would result in repulsion of 35 identical heavy chains” so that identified substitutions can then be used to generate antibodies “by engineering matched pairs of CH3 residues in one or more IgG heavy chains – CH3 regions” in follow up experiments. Id. Accordingly, Table 7 does not appear to describe heterodimer combinations, such as those that would result from a pairing of chains with different substitutions. Pet. 29–30 (citing, e.g., Ex. 1002 ¶¶ 111–118). As Petitioner further points out, the follow up experiments testing the matched pairs of CH3 residues did not include paired substitutions at positions 364 and 368. Id. at 29–31. Patent Owner points to disclosure in the ’935 provisional describing, as a distinguishing feature of its invention, the substitution of non-charged or neutral amino acids in wildtype CH3 with charged residues, which according to the ’935 provisional has the “advantage that at least one additional charge-charge interaction in the CH3 interface is created.” Prelim. Resp. 12 (citing, e.g., Ex. 2010 ¶¶ 42–48). For the same reasons discussed above, Petitioner has sufficiently established, for purposes of institution, that such disclosure would not reasonably convey to an ordinarily skilled artisan that the inventors had possession of the entire genus of heterodimeric antibodies comprising CH3 domains wherein a non-charged amino acid is replaced with a charged residue so as to create an additional charge-charge interaction in the CH3 interface. In this regard, we also note that “a description that merely renders the invention obvious does not satisfy the [written description] requirement.” Ariad, 598 F.3d at 1352.” slip op. at 34
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artDecided for petitioner
“adequately describes a heterodimeric antibody comprising the recited charged residues at the recited positions of the CH3 domains, i.e., “a positively charged amino residue at position 364” at a first CH3 domain and “a negatively charged amino acid residue at position 368” of the second CH3 domain. Having considered the evidence of record at this preliminary stage of the proceeding, and for the reasons set forth below, we are persuaded that Petitioner has shown sufficiently, for purposes of institution, that the ’935 provisional does not provide adequate written description support for claim 1 of the ’859 patent and that, accordingly, Desjarlais and Moore qualify as prior art to that claim. As Petitioner points out, the cited disclosure in the ’935 provisional does not “mention[] positions 364 and 368 together as a pair of positions for potential mutations on two chains.” Pet. 28 (citing Ex. 1002 ¶¶ 109–19). Although Patent Owner is correct that examples or actual reduction to practice are not required for adequate written description and “[a] specification may . . . contain a written description of a broadly claimed 34 invention without describing all species that [the] claim encompasses,” Prelim. Resp. 15 (quoting Ariad Pharms., 598 F.3d at 1352 and Cordis Corp. v. Medtronic AVE Inc., 339 F.3d 1352, 1365 (Fed. Cir. 2003)), the ’935 provisional must still “reasonably convey[] to those skilled in the art that the inventor[s] had possession of the claimed subject matter” as of the relevant date. Regeneron Pharms., Inc. v. Mylan Pharms. Inc., 127 F.4th 896, 914 (Fed. Cir. 2025); Ariad, 598 F.3d at 1351.” slip op. at 34
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“The ’859 patent does not provide an explicit definition of “immunoglobulin class.” Nevertheless, we do not construe that term to require “two heavy chains with four domains, VH, CH1, CH2, and CH3, and two Fab arms.” As an initial matter, the Specification teaches that antibodies include, 16 e.g., IgE and IgM — which have an additional CH4 domain in their heavy chains — as well as functional derivatives and/or fragments of known antibody isotypes. Ex. 1001, 11:44–48. Patent Owner’s proposed construction, which limits antibodies to those having two Fab arms and “two heavy chains with four domains, VH, CH1, CH2, and CH3,” excludes these embodiments and cannot be correct. Moreover, the ’859 patent defines antibody as containing “one or more domains” that bind an epitope on an antigen. Ex. 1001, 11:39–44. Thus, an antibody does not require two Fab arms as in a native immunoglobulin molecule.12 The ’859 patent also describes a preferred embodiment as “Ig-like molecules.” Id. at 11:49–52. Thus, we look to the definition of “Ig-like molecule” in the ’859 patent, i.e., “a proteinaceous molecule that possesses at least one immunoglobulin (Ig) domain,” to inform our understanding of the phrase “immunoglobulin class of proteins.” Ex. 1001, 11:4–6. Accordingly, we further construe “immunoglobulin class of proteins” to mean proteinaceous molecules comprising at least one domain that is derived from or shares sequence homology with an immunoglobulin domain.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,926,859 - PTAB · Jul 2, 2025 · PGR2025-00013 · APJ Jeffrey N Fredman · PGR · Institution
The Board instituted PGR on claims 1–16 and 18, finding a sufficient preliminary showing of unpatentability for claims 1–4, 7, 9–11, 13, and 18 under the Mabuchi-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review under 35 U.S.C. §§ 6, 324. Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented shows that it is more likely than not that Petitioner would prevail in establishing unpatentability of at least one of claims 1–16 and 18, which are the challenged claims of the ’082 patent that remain after Patent Owner’s disclaimer.” slip op. at 2
- Other 314aOther
“II. DISCRETIONARY DENIAL In view of the Acting Director’s memo bifurcating discretionary considerations and merits considerations,8 we note that Patent Owner had the opportunity to file a brief requesting discretionary denial of institution but did not file such a brief. Paper 7, 1. Accordingly, any discretionary issues were mooted, and the case was referred to this Board panel to consider the merits and other non-discretionary considerations. Id. at 1–2.” slip op. at 6
- Skill levelSkill level patent owner adoptedDecided for patent owner
“[a] person of ordinary skill in the art at the relevant time (“POSITA”) would have had a bachelor’s degree in mechanical engineering, or a related field, and two-to-three years of experience in the research, design, development, or testing of rotating or reciprocating mechanisms, with additional education substituting for experience and vice versa. Pet. 13 (citing Ex. 1002 ¶ 37). Patent Owner contends that [a] person of ordinary skill in the art (“POSITA”) as of the effective filing date of the Challenged Claims would have a working knowledge of product development and would likely have a degree in engineering and/or industrial design and/or at 5 Harris et al., US 6,432,072 B1, issued Aug. 13, 2002. Ex. 1006. 6 Pivaroff, US 6,682,496 B1, issued Jan. 27, 2004. Ex. 1007. 7 Clark, US 3,007,504, issued Nov. 7, 1961. Ex. 1014. 8 Available at https://www.uspto.gov/sites/default/files/documents/ InterimProcesses-PTABWorkloadMgmt-20250326.pdf. least three to five years of experience in conceiving, designing, engineering, and/or modifying such products and devices. Prelim. Resp. 16. While we appreciate that the parties differ slightly on the details of experience that an ordinary artisan would possess, we do not find a difference that affects our Decision. For purposes of this Decision, we rely on Patent Owner’s proposed level of ordinary skill in the art. The parties may provide briefing at trial, if appropriate, to explain why adoption of one definition over the other changes the remaining analysis.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“IV. CLAIM CONSTRUCTION In a post-grant review, we interpret a claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.200(b). Under this standard, we construe the claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. Neither party identifies any term that requires construction. Pet. 13‒ 15; Prelim. Resp. 16‒17. Accordingly, we need not construe any term at the present time.” slip op. at 7
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · Graham · NautilusPatents in suitUS 11,938,082 - PTAB · Apr 21, 2025 · PGR2024-00053 · APJ Jeffrey N Fredman · PGR · Institution
The Board instituted PGR on claims 34–38, 40, 41, 43–46, and 58–60, finding a reasonable likelihood of obviousness over the asserted Mabuchi-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“post-grant review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” 35 U.S.C. § 325(d). The Board uses a two-part framework in determining whether to exercise its discretion under § 325(d), specifically: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office” slip op. at 6
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“likely occur very close in time to the Board’s projected statutory deadline for a final written decision. . . . the claim construction hearing will occur on April 16, 2025” Prelim. Resp. 63. Neither party identifies a date for trial in the Parallel Litigation. On review of the Pacer record, it appears that the claim construction hearing was continued to April 23, 2025. There is no indication that the trial will be completed prior to a PTAB Final Written Decision, much less a court decision. Accordingly, this factor weighs against exercising discretion to deny institution.” slip op. at 12
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review under 35 U.S.C. § 324. Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented shows that it is more likely than not that Petitioner would prevail in establishing unpatentability of at least one of claims 34–38, 40, 41, 43–46, and 58–60 of the ’482 patent.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“[a] person of ordinary skill in the art at the relevant time (“POSITA”) would have had a bachelor’s degree in mechanical engineering, or a related field, and two-to-three years of experience in the research, design, development, or testing of rotating or reciprocating mechanisms, with additional education substituting for experience and vice versa. Pet. 15 (citing Ex. 1002 ¶ 37). Patent Owner contends that [a] person of ordinary skill in the art (“POSITA”) at the time of the invention would have a working knowledge of product development, and would likely have a degree in engineering and/or industrial design, and/or at least three to five years of experience in conceiving, designing, engineering, and/or modifying such products and devices.” slip op. at 14
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · Graham · NautilusPatents in suitUS 11,857,482 - Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.