• Nxtgen Toys, LLC v. Zipstring, LLCAll claims unpatentable
  PTAB · Feb 20, 2026 · IPR2024-01213 · APJ Richard H Marschall · IPR · Final written decision

  Claims 1–4, 12, and 15–17 are unpatentable; substitute claim 27 is allowed, while substitute claims 21–26 and 28 are denied as obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person having ordinary skill in the art at the time of the invention “was typically a person with a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or other science or 6 Patent Owner does not rely on any objective indicia of nonobviousness in this proceeding. engineering based degree that [was] familiar with general principles of mechanics and aerodynamics with at least two years of experience in product design and development in the field of toys or other amusement type devices.” Pet. 32 (citing Ex. 1002 ¶¶ 2–6, 22–26). Patent Owner states that it submitted the following proposal for a POSITA in the related district court litigation: “[a POSITA] would have had at least a B.S. degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Industrial Design, Product Design, or similar field, with at least two years industry experience in one of these fields, and such POSITA would have been familiar with general principles of mechanics, fluid mechanics and aerodynamics.” PO Resp. 4–5. We note that the parties’ proposals overlap considerably, and neither party argues the inadequacy of the other party’s proposal or that any patentability issue in this case turns on the resolution of this issue. We find Petitioner’s definition consistent with the problems and solutions disclosed in the ’774 patent and prior art of record, and adopt it as our own. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). We would arrive at the same findings and conclusions in this Decision if we adopted Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner contends that no “term requires construction to resolve the invalidity grounds presented in this Petition since the prior art renders claims 1–4, 12, and 15–17 unpatentable under any reasonable interpretation of the claims.” Pet. 7. Patent Owner argues that it “does not believe express claim constructions are necessary during this proceeding because the claims can readily be given their ordinary and customary meaning in the context of the patent at the time it was filed.” PO Resp. 5. Based on the parties’ positions and our view of the record, we need not expressly construe any claim limitations to resolve the issues in this Decision. To the extent that any implicit claim construction issues relate to the issues raised by the parties, we address them in the context of the parties’ patentability arguments below.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “string, and that adding Scorch’s slot removes this arguably inconvenient process by allowing insertion and removal of a string without removing and reinstalling any aspects of the housing. See Pet 85–86 (citing Ex. 1002 ¶¶ 174–175; Ex. 1007, 3:30–3:53, 6:03; Ex. 1008, 3:46–4:45); Pet. Reply 18–20 (citing in part Ex. 2002 ¶ 187 (Dr. Janét’s testimony that Wagner’s removal and reinstallation of a cover “may be viewed as an inconvenient process”)). Making insertion and removal of the string easier and quicker provides a notable advantage over Wagner’s existing device. See id. Scorch itself supports this argument and the related expert testimony because it discusses insertion and removal of strings and stated that the slot allows a user to “swap them out really quick.” Ex. 1007, 3:30–53. Petitioner also persuasively argues that a POSITA would know how to add the slot while maintaining the proper operation of the device, such as allowing insertion and removal of the string and avoiding inadvertent exiting of the string from the device. See Pet. 86–87 (citing Ex. 1002 ¶¶ 175–176; Ex. 1007, 4:00–30, Ex. 1008, 2:49–52); Pet. Reply 19, 21 (citing Ex. 1002 ¶¶ 174–176). We find Petitioner’s arguments and reasoning in support of adding Scorch’s slot to Wagner’s housing straightforward and persuasive. Patent Owner’s arguments against the combination do not directly refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176).” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176). At best, Patent Owner’s arguments on this issue establish potential drawbacks in Petitioner’s proposed combination, but drawbacks alone do not defeat Petitioner’s obviousness rationale that includes readily apparent benefits. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”); Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine “). In addition, even if Patent Owner were correct that Wagner’s existing design works as well as Petitioner’s proposed combination, given all of the tradeoffs involved, that would not fatally undermine Petitioner’s showing. In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (obviousness does not require that the proposed combination “is the preferred, or most desirable, combination”). On this record, Petitioner’s (and Scorch’s) stated advantages that are achieved when adding Scorch’s slot to Wagner’s housing adequately support Petitioner’s motivation to combine rationale.” slip op. at 26

  Patent outcomesUS 11,674,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Nautilus
  Patents in suitUS 11,674,774
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.Some claims unpatentable
  PTAB · Nov 25, 2025 · PGR2024-00030 · APJ Linda E Horner · PGR · Final written decision

  Claims 17 and 18 are unpatentable under §112(d) for improper dependent form; claims 1–10 and 12–16 were not shown unpatentable on the asserted obviousness grounds.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “We do not credit Dr. Anthony’s testimony, which is based on the arbitrary shading in Figure 7 (see Ex. 1002 ¶ 174), that Schröder teaches or suggests limitation 1[d] because it (1) is inconsistent with Petitioner’s reasoning for limitation 1[c], and (2) it is based on an admitted misreading of the embodiment of Schröder’s Figure 5 (see Ex. 1002 ¶ 175). As to the first item, Dr. Anthony states that “a POSITA would have been motivated to place a battery in a part of the cavity that is far from a PCB holding other electrical components because that configuration allows for better thermal management.” Ex. 1002, para. 175. The problem with this statement is that Petitioner relies on Schröder’s teaching that inlay 12, i.e., the alleged PCB, could include “other electrical components,” such as a battery to support its position that Schröder suggests placing a battery between the ring halves. See, e.g., Pet. Reply 2 (pointing to Dr. Mercier’s depo testimony that inlay 12 with “other components” is inserted between ring halves); id. at 3 (relying on Schröder’s teaching about placing components in depressions on inlay 12). So, Petitioner earlier asserts for the battery limitation 1[c] that Schröder teaches or suggests putting a battery on inlay 12 inside the ring halves, but then for limitation 1[d], Dr. Anthony testifies that a POSITA would place the battery “far” away from the inlay 12 (i.e., the alleged PCB). These positions are inconsistent.” slip op. at 25

  • Skill levelSkill level board ownOther

    “at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶¶ 18–22). Petitioner also contends that a person of ordinary skill would have been “familiar with, for example, sensor system design and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 26. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’178 patent and the references cited in the Petition.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner indicates that in the related ITC proceeding involving the ’178 patent, the Administrative Law Judge (ALJ) adopted three constructions agreed-upon by the parties in that proceeding8 and also construed two disputed terms.9 Resp. 26–27 (citing Ex. 2016, 5, 6, 14). Patent Owner agrees with Petitioner, however, that no terms need to be construed to decide the issues raised in the Petition. Id. at 27. We reviewed the constructions adopted by the ITC. Ex. 2016, 5, 6, 14. 8 In the ITC proceeding, the ALJ adopted the parties’ agreed-upon constructions that: (1) the preamble of claim 1 [a finger-worn wearable ring device] is limiting; (2) [positioned/configured to fit] within a “cavity” is [positioned/configured to fit] within a “hollow space”; and (3) [the internal housing component] “coupled with” [the external housing component] is [the internal housing component] “connected with” [the external housing component]. Ex. 2016, 5. 9 In the ITC proceeding, the ALJ construed the claims such that: (1) the internal and external housing components of claims 1, 12, and 17 enclose space and do not necessarily exclude potting material; and (2) “circumferential,” as recited in claims 1, 17, and 18, does not require a closed shape. Ex. 2016, 14, 17. These constructions are not germane to the issues we need to decide to resolve this proceeding. Thus, we agree that no explicit claim construction is necessary for this decision. To the extent the parties’ arguments raise any implicit issues of claim construction, we address those issues within the context in which they are raised in our analysis below.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “The record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “Mestas’s batteries, layout, and other components . . . would have to be scaled down 5 to 10 times to be appropriately sized for a finger worn ring.” Resp. 64 (internal quotation marks omitted) (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Moreover, we do not credit Dr. Anthony’s testimony that miniaturization of the battery would have been “trivial to implement.” Ex. 1002 ¶ 242. Dr. Anthony admitted on cross-examination that it would not have been within the level of skill of a person having ordinary skill in the art to design a smaller version of Mestas’s battery, and that such a person would need to procure a battery of the appropriate size and specifications for implementation in a finger-ring from a battery manufacturer. Ex. 2021, 315:9–318:9. Yet Dr. Anthony had not ascertained, for purposes of his testimony, whether there was a battery available in 2013 that was appropriate to fit within the inlay space of the modified version of Schröder’s finger-ring that he and Petitioner allege would have been obvious to one of skill in the art at that time. Id. at 321:5–10. Further, we credit Dr. Mercier’s testimony that Dr. Anthony’s testimony fails to consider the differences in power requirements between Mestas and Schröder or to account for the constraints of such a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶¶ 159–160. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’178 patent, we also have evidence that prior art “finger ring wearables up to the ’178 patent had used ‘coin’ type batteries.” Id. at 66 (citing Ex. 2018 ¶ 161). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would look to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 161. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 61–70. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring-type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 71. Based on these findings, Petitioner has not met its burden to show by a preponderance of the evidence that a person having ordinary skill in the art would have been led to modify Schröder’s finger-ring to place a curved battery between the internal and external housing components in light of the teachings in Mestas. Thus, Petitioner has not met its burden to show by a preponderance of the evidence that dependent claim 3 of the ’178 patent is unpatentable over Schröder and Mestas.” slip op. at 38

  Patent outcomesUS 11,868,178 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,868,178
• Slack Technologies, LLC. / Salesforce, Inc. v. Wrinkl, Inc.Instituted
  PTAB · Apr 21, 2025 · IPR2024-01489 · APJ Barbara A Parvis · IPR · Institution

  The Board instituted IPR on claims 1–30 on all asserted grounds, finding a reasonable likelihood that Cohen anticipates the challenged claims.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “To show anticipation under 35 U.S.C. § 102, each and every claim element, arranged as in the claim, must be found in a single prior art reference. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359 (Fed. Cir. 2008); Verdegaal Bros., Inc. v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). Identity of terminology is not required for a claim element to be met directly by the prior art. In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009); In re Bond, 910 F.2d 831, 832 (Fed. Cir. 1990) (citations omitted) (“[T]his is not an ‘ipsissimis verbis’ test.”). For anticipation, we take into account not only the specific teachings of the reference, but also the inferences which one skilled in the art would reasonably be expected to draw therefrom. In re Preda, 401 F.2d 825, 826 (CCPA 1968). B. Level of Ordinary Skill in the Art” slip op. at 13

  • Parallel petitionsDecided for petitioner

    “Wrinkl, Inc. v. Slack Technologies, LLC, No. 1:24-cv-00620 (D. Del. May 23, 2024). Pet. 1; Paper 4, 1. Patent Owner also states that a “second IPR was filed against the same patent in proceeding IPR2024-01490.” Paper 4, 1. Patent Owner does not argue that we should exercise discretion under 35 U.S.C. § 314(a) because Petitioner uses more than one petition to challenge the ’731 patent. challenges the alleged priority date of the ’731 patent (IPR2024-01489) (‘First Petition’) and the second petition assumes that the Patent Owner’s claimed priority date is valid, and addresses prior art references predating that priority date (IPR2024-01490) (‘Second Petition’).” Ex. 1019, 1. In accordance with the Consolidated Trial Practice Guide1 (“CTPG”), issued in November 2019, “there may be circumstances in which more than one petition may be necessary” including “when there is a dispute about priority date requiring arguments under multiple prior art references.” CTPG 59. Such is the case here. Patent Owner does not file any Preliminary Response or other paper disputing Petitioner’s use of two petitions to challenge the claims of the ’731 patent. Based on the record before us, we consider the merits of both petitions because Petitioner’s stated reasons for filing two petitions are consistent with the CTPG. See generally Ex. 1019 (citing CTPG, 59 (“the Board recognizes that there may be circumstances in which more than one petition may be necessary, including, for example, . . . when there is a dispute about priority date requiring arguments under multiple prior art references)). C. The ’731 Patent” slip op. at 2

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther

    “reasonable likelihood that it would prevail on a ground of unpatentability. 35 U.S.C. § 314(a); Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3)) (“In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.”). Petitioner first must raise the issue of entitlement to a claimed priority date by “identifying, specifically, the features, claims, and ancestral application or applications allegedly lacking § 112 support for the claims based on the identified features.” Focal Therapeutics, Inc. v. Senorx, Inc., IPR2014-00116, Paper 8 at 9–10 (PTAB Apr. 22, 2014); Mission Integrated Techs., LLC v. Joshua Clemente, IPR2023-01285, Paper 16 at 18 (PTAB Feb. 23, 2024). Then, Patent Owner must make a sufficient showing of entitlement to earlier filing date(s), in a manner that is commensurate in scope with the specific points and contentions raised by the petitioner. See id.” slip op. at 11

  • Skill levelSkill level petitioner adoptedOther

    “two years of experience in the graphical user interface field” or, alternatively “a master’s degree in computer science (or similar discipline) and at least two years of similar experience.” Pet. 16 (citing Ex. 1003 ¶ 40). We find that “at least” in Petitioner’s formulation of the level of skill in the art is vague and open-ended. Otherwise, we preliminarily adopt Petitioner’s formulation of the level of skill in the art, which appears consistent with the specification and prior art presented. C. Claim Construction” slip op. at 14

  Claim construction§ 102 anticipation§ 112 disclosureDiscretionary denialcites Phillips
  Patents in suitUS 11,973,731
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.Instituted
  PTAB · Dec 6, 2024 · PGR2024-00030 · APJ Elizabeth M Roesel · PGR · Institution

  Instituted PGR of claims 1–10 and 12–18; Petitioner met the institution threshold for claim 1 based on obviousness over Schröder.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner

    “In applying § 325(d), we use a two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or presented to the Office; and (2) if either condition of the first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential). We also consider the non-exclusive factors set forth in Becton, Dickinson and Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 (PTAB Dec. 15, 2017) (precedential in relevant part), which “provide useful insight into how to apply the framework” under § 325(d). Advanced Bionics, Paper 6 at 9. Those non-exclusive factors include: (a) the similarities and material differences between the asserted art and the prior art involved during examination; (b) the cumulative nature of the asserted art and the prior art evaluated during examination; (c) the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for rejection; (d) the extent of the overlap between the arguments made during examination and the manner in which Petitioner relies on the prior art or Patent Owner distinguishes the prior art; (e) whether Petitioner has pointed out sufficiently how the Examiner erred in its evaluation of the asserted prior art; and (f) the extent to which additional evidence and facts presented in the Petition warrant reconsideration of the prior art or arguments.” slip op. at 12

  • Skill levelSkill level board ownOther

    “Level of Ordinary Skill in the Art At this stage of the proceeding, there is no dispute about the level of ordinary skill in the art. Based on the testimony of Petitioner’s declarant, we determine that a person of ordinary skill in the art (“POSITA”) would have had a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, and two years of experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. A POSITA would have been familiar with sensor system design and signal experience, and vice versa. Ex. 1002 ¶ 21. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’178 Patent Specification and the asserted prior art references.” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “as would be used by a district court to construe a claim in a civil action involving the validity or infringement of a patent. 37 C.F.R. § 42.200(b). Under that standard, claim terms are given their ordinary and customary meaning, as would have been understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history of record. Id.; Phillips v. AWH Corp., 415 F.3d 1303, 1312–19 (Fed. Cir. 2005) (en banc); Thorner v. Sony Comput. Entm’t Am. LLC, 669 F.3d 1362, 1365–66 (Fed. Cir. 2012). “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We agree with the parties that it is not necessary for us to provide an express construction for any claim term for purposes of determining whether to institute a post-grant review. Pet. 8; Prelim. Resp. 25.” slip op. at 17

  • Expert testimonyPetitioner expert creditedOther

    “Petitioner relies on Dr. Anthony’s testimony that a POSITA would have understood Figures 6–8 as showing a cavity as recited in claim 1 and the battery must be arranged within that cavity because “[o]therwise, if the battery did not fit within the ‘finger-ring,’ the ‘finger-ring’ either has (1) a battery that sticks out or is exposed to the environment or (2) a wired connection to power its components, which is contrary to the intent of having a portable, wearable device.” Ex. 1002 ¶ 166. Dr. Anthony opines that “[a] POSITA would have understood that the battery’s location within the cavity is the ‘first portion’ of the cavity because the battery necessarily occupies space in the cavity.” Id. ¶ 168. Such testimony, when viewed along with the rest of Petitioner’s showing, provides sufficient basis for institution.” slip op. at 20

  Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 11,868,178
• Bj’S Wholesale Club Holdings, Inc. v. Walmart Apollo, LLCAll claims unpatentable
  PTAB · Apr 10, 2024 · IPR2022-01564 · APJ Patrick R Scanlon · IPR · Final written decision

  Claims 1–14 are unpatentable as anticipated by Keith; the Board did not reach the alternative obviousness ground over Hanson and Keith.

  RulingsFinal written decision

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “claims of the later-filed application must be supported by the written description in the parent ‘in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.’” Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1335 (Fed. Cir. 2010) (quoting Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997)). “[T]he hallmark of written description is disclosure,” and the test “is whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date” of that application. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc) (citing Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1562–63 (Fed. Cir. 1991)). “[T]he test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. But, “[i]t is not sufficient for purposes of the written description requirement of [35 U.S.C.] § 112 that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood, 107 F.3d at 1572.” slip op. at 33

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. Inc., v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). Moreover, “[b]ecause the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). Whether a reference anticipates is assessed from the perspective of an ordinarily skilled artisan. See Dayco Prods., Inc. v. Total Containment, Inc., 329 F.3d 1358, 1368 (Fed. Cir. 2003) (“‘[T]he dispositive question regarding anticipation [i]s whether one skilled in the art would reasonably understand or infer from the [prior art reference’s] teaching’ that every claim element was disclosed in that single reference.”). slip op. at 13

  • BurdenFwd all claims unpatentableDecided for petitioner

    “preponderance of the evidence that the claims are unpatentable. 35 U.S.C. § 316(e) (2018); 37 C.F.R. § 42.1(d) (2022). “In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review).” slip op. at 12

  Patent outcomesUS 10,803,435 unpatentable
  § 102 anticipation§ 112 disclosurecites KSR · Graham
  Patents in suitUS 10,803,435
• Mercedes-Benz USA, LLC v. Westport Fuel Systems Canada Inc.Institution denied
  PTAB · Jun 20, 2023 · IPR2023-00351 · APJ Frances L Ippolito · IPR · Institution

  The Board denied institution on all challenged claims because the claims receive the provisional’s earlier priority date, making Gottlieb unavailable as prior art.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the Petition and any response thereto shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail in showing the unpatentability of at least one of the challenged claims. Accordingly, we do not institute inter partes review of claims 1–3, 6, 13, 14, 16–22, 26–28, and 41 of the ’138 patent based on the grounds raised in the Petition.” slip op. at 2

  • Disclosure Requirements (§112) › Written description (Ariad)Entitled to earlier dateDecided for patent owner

    “Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Likewise, we observe that claim 41 recites that the “hydraulic fluid acts as an incompressible solid so that movement caused by the actuation of said dimensionally responsive member is transmitted through said fluid layer.” Ex. 1001, 20:53–56 (emphases added). Again, the ’791 provisional discloses that the “trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16.” Id. at 12:5–13:14 (emphases added). We find, based on this description of the hydraulic link, with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, it would act as an incompressible solid. Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 12

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Likewise, we observe that claim 41 recites that the “hydraulic fluid acts as an incompressible solid so that movement caused by the actuation of said dimensionally responsive member is transmitted through said fluid layer.” Ex. 1001, 20:53–56 (emphases added). Again, the ’791 provisional discloses that the “trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16.” Id. at 12:5–13:14 (emphases added). We find, based on this description of the hydraulic link, with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, it would act as an incompressible solid. Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 12

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot reached

    “Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 13

  § 102 anticipation§ 112 disclosure
  Patents in suitUS 6,575,138
• Mercedes-Benz USA, LLC v. Westport Fuel Systems Canada Inc.Institution denied
  PTAB · Jun 20, 2023 · IPR2023-00352 · APJ Carl M Defranco · IPR · Institution

  The Board denied institution because the challenged claims are entitled to the provisional’s earlier filing date, making Gottlieb unavailable as prior art for every asserted ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “For a patent to claim the benefit of the filing date of its provisional application, the provisional application must comply with the written description requirement of 35 U.S.C. § 112. Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). To show sufficient written description support, the provisional must reasonably convey to those skilled in the art that the inventor had possession of the later-claimed subject matter as of the provisional’s filing date. Ariad Pharms., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). The written description inquiry is a question of fact, and, as such, “the level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Ariad, 598 F.3d at 1351.” slip op. at 9

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “The hydraulic link 22 consists of a hydraulic cavity 84 formed by hydraulic chamber 28 and hydraulic chamber cap 86. The cavity 84 is filled with viscous fluid. Within the chamber 28 is located the hydraulic piston part 72 of the needle valve 15. The chamber 28 is fitted around the hydraulic piston 72. O-ring seals 90 are located in the hydraulic chamber cap 86 and in the bottom of the hydraulic chamber 28 to prevent the fluid from leaking out of the cavity 84. The diametrical clearance between the outside diameter of the hydraulic piston 72 and the inside diameter of the hydraulic chamber 28 is extremely small (on the order of 50 to 250 microns). The exact clearance is dependent on the viscosity of the chosen fluid. The hydraulic flow in this clearance . . . is very small. The hydraulic fluid . . . acts as a solid during fast motions, because there is little flow going around the needle piston. Because the actuation occurs suddenly (on the order of 200 μs), the hydraulic fluid between the hydraulic chamber 28 and the needle valve piston 72 does not have the time to flow around the piston 72. Instead, the trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16. Id. at 12:5–13:14 (emphases added). Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date.” slip op. at 10

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Mercedes does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 11

  § 102 anticipation§ 112 disclosure
  Patents in suitUS 6,298,829
• Bj’S Wholesale Club Holdings, Inc. v. Walmart Apollo, LLCInstituted
  PTAB · Apr 11, 2023 · IPR2022-01564 · APJ Patrick R Scanlon · IPR · Institution

  The Board instituted IPR on claims 1–14 and all asserted grounds, finding a reasonable likelihood that Keith anticipates at least claims 1 and 10.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2021). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that the information presented in the Petition establishes a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim. We institute an inter partes review of claims 1‒14 based on the grounds set forth in the Petition.” slip op. at 2

  • Parallel petitionsDecided for petitioner

    “Under the circumstances presented, where the priority date of the challenged claims is disputed, we conclude it is not unreasonable for Petitioner to present separate challenges, one of which relies on references that are prior art only if the challenged claims are not entitled to Patent Owner’s claimed priority date, which has yet to be finally determined. See TPG 59 (stating that “a dispute about priority date requiring arguments under multiple prior art references” can be a potential reason for the Board to institute trial on multiple petitions challenging the same patent). Thus, on the present record, we decline to exercise our discretion to deny institution of this Petition on the basis of Petitioner filing multiple petitions.” slip op. at 46

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “have had a Bachelor’s degree in computer science, computer engineering, electrical engineering, or a related field or equivalent coursework or experience, and one to two years of experience with mobile device applications and retail POS systems,” also noting that “[m]ore education can supplement practical experience and vice versa.” Pet. 20–21 (citing Ex. 1002 ¶ 34). Patent Owner, at this stage of the proceeding, does not dispute Petitioner’s definition of the person of ordinary skill in the art. Prelim. Resp. 18. For the purposes of this Decision, we apply Petitioner’s proffered level of skill in the art because it appears consistent with the problems addressed in the ’435 patent and the prior art.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “We determine that an express construction of this or any other claim term is not necessary for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denial
  Patents in suitUS 10,803,435
• Simpson Strong-Tie Company Inc. v. Columbia Insurance CompanySome claims unpatentable
  PTAB · Mar 15, 2023 · PGR2021-00109 · APJ Stephen E Belisle · PGR · Final written decision

  Claims 1–12, 15–17, and 21–23 are unpatentable; the revised contingent motion to amend is granted for claim 32 and denied for claims 24–31, 33–35, 38–40, and 44–46.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art, at the time” slip op. at 22

  • BurdenNot shown unpatentable

    “Accordingly, based on the foregoing and the complete record before” slip op. at 38

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “C. Claim Construction We apply the claim construction standard articulated in Phillips v.” slip op. at 23

  • Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteMixed

    “persuaded by Petitioner that the limitations “a channel-shaped portion configured to receive the structural component” and “a base configured to receive an end portion of the structural component thereon to support the structural component” would not have informed the skilled artisan, with reasonable certainty, about the scope of the claimed invention. See Energizer Holdings, Inc. v. Int’l Trade Comm’n, 435 F.3d 1366, 1370 (Fed. Cir. 2006) (“When the meaning of the claim would reasonably be understood by persons of ordinary skill when read in light of the specification, the claim is not subject to invalidity upon departure from the protocol of ‘antecedent basis.’”). Accordingly, we conclude that Petitioner” slip op. at 40

  Patent outcomesUS 11,021,867 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 11,021,867
• 3shape A/S / 3shape Inc. v. Align Technology, Inc.Institution denied
  PTAB · Jan 11, 2022 · IPR2021-01120 · APJ Neil T Powell · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 4, 10, 11, 13, 18, 19, 25, and 30 were obvious over Babayoff ’529 and Atiya.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “2. Summary Regarding Obviousness Challenge Because Patent Owner’s arguments and evidence persuasively rebut Petitioner’s assertion that the Ancestral Applications do not provide written description support for the challenged claims, Petitioner has not shown adequately that Babayoff ’529 is prior art to the challenged claims. Accordingly, Petitioner has not demonstrated a reasonable likelihood of prevailing on its assertion that claims 1, 4, 10, 11, 13, 18, 19, 25, and 30 would have been obvious over Babayoff ’529 and Atiya. III. CONCLUSION For the foregoing reasons, we determine that the information presented in the record does not establish there is a reasonable likelihood that Petitioner would prevail with respect to at least one challenged claim of the patent ’151 patent. Accordingly, we do not institute an inter partes review. IV. ORDER For the reasons given, it is: ORDERED that the Petition is denied; and FURTHER ORDERED that no inter partes review is instituted.” slip op. at 26

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of ordinary skill in the art usually is evidenced by the references themselves. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). As Petitioner’s description of a person of ordinary skill is supported by expert testimony and appears consistent with the technology at issue, for purposes of this Decision, we apply Petitioner’s definition of a person of ordinary skill in the art.” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “In response, Patent Owner objects that “Petitioners’ interpretation of the claims as requiring the use of unfiltered white light to determine depth data is plainly at odds with the claims themselves.” Prelim. Resp. 4. Patent Owner argues that “[t]his interpretation leads to a contradiction between the independent and dependent claims: the same light illuminating the intraoral structure would have to be simultaneously filtered (as recited in the dependent claims) and unfiltered (as Petitioners presume to be required by the independent claims).” Id. Patent Owner also suggests the possibility that the Petition’s arguments mean “the independent claims encompass using unfiltered white light to obtain depth data.” Id. at 7. We do understand the Petition’s arguments to mean that the independent claims encompass using unfiltered white light to illuminate an intraoral structure, not that the independent claims require using white light to illuminate an intraoral structure. And we agree with that understanding of the independent claims’ scope. Consistent with Patent Owner’s explanation, if we construed the independent claims to require using unfiltered white light to illuminate an intraoral structure, that would conflict directly with the dependent claims’ express requirement to use colored filters.” slip op. at 15

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not reached

    “2. Summary Regarding Obviousness Challenge Because Patent Owner’s arguments and evidence persuasively rebut Petitioner’s assertion that the Ancestral Applications do not provide written description support for the challenged claims, Petitioner has not shown adequately that Babayoff ’529 is prior art to the challenged claims. Accordingly, Petitioner has not demonstrated a reasonable likelihood of prevailing on its assertion that claims 1, 4, 10, 11, 13, 18, 19, 25, and 30 would have been obvious over Babayoff ’529 and Atiya.” slip op. at 26

  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips
  Patents in suitUS 10,750,151

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.