- PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther
“On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 10,689,740 - Arkema Inc. / Arkema France v. Honeywell International Inc.All claims unpatentablePTAB · Aug 25, 2022 · PGR2016-00011 · APJ Grace Karaffa Obermann · PGR · Remand
Claims 1–20 are unpatentable under § 102(a) for prior public use; the Board did not reach the other anticipation, obviousness, and enablement grounds.
RulingsRemand decision- RemandOther
“On October 1, 2019, the Federal Circuit held that we “abused [our] discretion by assuming the authority that 35 U.S.C. § 255 expressly delegates to the Director: to determine when a Certificate of Correction is appropriate,” and vacated our Final Written Decision. Honeywell Int’l Inc. v. Arkema Inc., 939 F.3d 1345 (Fed. Cir. 2019). The Federal Circuit instructed us to “authorize Honeywell to file a motion seeking leave to petition the Director for a Certificate of Correction.” Id. at 1351. Pursuant to the Federal Circuit’s mandate, we gave our authorization, and Patent Owner filed its Motion for Leave to Request a Certificate of Correction. PGR11 Paper 61; PGR12 Paper 41. After additional briefing from the parties was complete, we granted Patent Owner’s Motion. PGR11 Paper 77; PGR12 Paper 57. Patent Owner filed its Request for a Certificate of Correction, as well as a Petition to Accept [Unintentionally] Delayed Claim to Priority under 35 U.S.C. § 120 and 37 C.F.R. § 1.78. PGR11 Ex. 2174; PGR12 Ex. 2172.” slip op. at 3
- Skill levelSkill level board ownDecided for petitioner
“develops new refrigerants for use as heat transfer fluids. Ex. 1002 ¶ 149. Such a person would have had a Ph.D. in Chemistry, Chemical Engineering, Mechanical Engineering, Material Science, or a related field or discipline and at least 3 to 5 years of experience, or alternatively an M.S. degree and 5 to 10 years of experience. Id. Patent Owner’s Declarant, Dr. Bivens, provides a similar description of the person of ordinary skill in the art, stating that such a person would have a B.S. degree in Chemical Engineering or Chemistry, and five years of work experience, or a Ph.D. or M.S. degree and 2–3 years of experience. Ex. 2001 ¶ 23. Based on these descriptions, we find that the parties’ definitions of ordinary skill in the art are substantially the same, and agree with the parties that an ordinarily skilled artisan would be educated in the Chemical and Chemical Engineering arts or related disciplines. We also agree with the parties that a person having less formal education, such as a B.S. or M.S. degree, would require more years of experience than a person with more formal education, such as a Ph.D., to qualify as an ordinarily skilled artisan. We also find that neither party states how any difference in the parties’ articulated levels of skill impacts this proceeding. Thus, our analysis would be the same regardless of any minor differences between the parties’ respective articulations. Finally, we note that the level of ordinary skill in the art is reflected by the prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateNot shown unpatentable
“We agree with Petitioner that the ’525 application’s statement that the compounds are “adaptable for use” weighs against a finding of adequate written description. First, “adaptable for use” is vague, as Dr. Bivens acknowledges. See Ex. 1177, 151:15 (testifying that “adaptable for use can have a wide range of meaning”). Second, the ’525 application gives no direction on how a skilled artisan would need to adapt any particular composition for use in AAC, or even if any “adaptation” was necessary. We find that such a teaching is important in this case to show that the inventors had possession of the claimed invention, given our findings above that the art of AAC was unpredictable and that a heat-transfer composition for AAC required specific technical features that were unpredictable and unexpected. For completeness, we again reject Patent Owner’s argument that “[t]o show the inventors possessed claim 1 requires no more” than the statement in the written description that “‘the compositions of the present invention are believed to be adaptable . . . with or without system modification.’” PGR12 Resp. 27–28 (quoting Ex. 1001, 7:4–8). Regardless of the exact wording of claim 1, the inventors “still [had to have] describe[d] some way of performing the claimed methods.” Ariad, 598 F.3d at 1355. And here, with merely a passing reference to AAC, the ’525 application fails to provide any credible “technologic knowledge” to demonstrate to an ordinarily skilled artisan that Patent Owner “was in possession of the invention that is claimed.” Id.” slip op. at 43
- Novelty / Anticipation (§102) › Prior-art status of a reference › On-sale bar (Pfaff, Helsinn)UnpatentableUnpatentable
“unless . . . the claimed invention was . . . in public use . . . before the effective filing date of the claimed invention.” 35 U.S.C. § 102(a)(1). “The proper test for the public use prong . . . is whether the purported use was accessible to the public or was commercially exploited.” Delano Farms Co. v. Cal. Table Grape Comm’n, 778 F.3d 1243, 1247 (Fed. Cir. 2015) (quotation omitted). “Commercial exploitation is a clear indication of public use . . . .” Invitrogen Corp. v. Biocrest Mfg., L.P., 424 F.3d 1374, 1380 (Fed. Cir. 2005).” slip op. at 53
Patent outcomesUS 9,157,017 unpatentable§ 102 anticipation§ 112 disclosurePatents in suitUS 9,157,017
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.