• Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentable
  PTAB · Aug 18, 2026 · IPR2025-00339 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 22, 23, 28, and 30 are unpatentable over Choi, Labaziewicz, and Yu; claims 1–3, 10–12, 24, 25, 32, and 33 were not shown unpatentable.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningOther

    “We decline Patent Owner’s invitation to construe “during a frame” of “independently controlling simultaneous data acquisition with each of the first and second channels during a frame” by importing the extraneous limitations “at some point between the beginning and the end of the exposure interval during which the image sensors capture a single image.” As pointed out by Petitioner, Patent Owner’s proposed construction is unsupported by the language of claim 22 and the ’180 Specification because Specification does not disclose an exposure interval nor suggest “during a frame” is limited to an exposure interval. Patent Owner and its expert Dr. Saber cite only extrinsic evidence (Exs. 2006, 2009) to support its argument that claim 22 should be limited to an “exposure interval during which the image sensors capture a single image.” See PO Resp. 16–17; Ex. 2020 ¶ 64. Similarly, Patent Owner relies only on extrinsic evidence (e.g., Ex. 2011, 1; Ex. 2022, 1; Ex. 2020 ¶ 66) to limit “during” to “at some point between the beginning and the end.” See id. at 18. When considered in the context of claim 22 and the ’180 Patent Specification which do not limit “during a frame” to an exposure interval, we find that we cannot rely on Patent Owner’s citations to extrinsic evidence to yield a reliable construction for “during a frame.” As demonstrated in the analysis below, we need not provide an explicit construction for “during a frame” to resolve the parties’ disputes regarding the merits of the patentability challenges. See Realtime, 912 F.3d at 1375. We apply the ordinary and customary meaning for “during a frame.” To the extent that an explicit identification of the ordinary and customary meaning may aid the understanding of our analysis, consistent with the language of claim 22 and the ’180 Patent Specification, we find that the ordinary and customary meaning for “during a frame” is “during the period of time that data for an image frame is acquired.” See Ex. 1001, code (57), 20:6–24, 25:23–35.” slip op. at 12

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2-3 years of experience in digital imaging systems,” and that “[l]ess experience may be necessary with additional education, and likewise, less education may be necessary with additional work experience.” Pet. 6 (citing Ex. 1003 ¶¶ 16–19). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’180 Patent Specification and the prior art of record.” slip op. at 20

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Owner to show that Labaziewicz is not prior art because the ’180 Patent is entitled to the earliest August 25, 2004, filing date of the ’854 Provisional Application. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). Patent Owner’s arguments fail to meet this burden of production because, aside from addressing deficiencies of written description support the ’854 Provisional Application provides written description support for all of the limitations of the claimed invention. See PO Resp. 60–64; PO Sur-reply 25–28. Specifically, Patent Owner does not address written description support in the ’854 Provisional Application for “independently controlling simultaneous data acquisition with each of the first and second channels during a frame”––limitation [22.3]––the heart of the parties’ claim construction disputes addressed above in Section II.A. See PO Resp. 60–64; PO Sur-reply 25–27. Accordingly, Patent Owner has not met its burden of production in coming forward with evidence or argument to show possession of the claimed invention in the ’854 Provisional Application. As a result, the burden of production does not shift back to Petitioner, and, therefore, the ’180 Patent is not entitled to the benefit of the August 25, 2004, filing date of the ’854 Provisional Application.” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Petitioner does not present arguments that it would have been obvious to a person of ordinary skill in the art at the time of the invention to modify the teachings of Matsushima to acquire data for images 62A and 62B at the argues that Matsushima renders obvious this limitation. See id. at 21, 23, 30; PO Resp. 33–34 (“[T]he Petition provides no further explanation why Matsushima renders this limitation obvious.”). In the Reply for the first time, Petitioner asserts that “a POSITA would understand that Matsushima’s disclosure, including its multi-channel architecture, synchronous control of channels, and capturing two images that are scaled versions of the same scene, renders obvious simultaneous acquisition during a frame. Pet. Reply 13 (citing Ex. 1069 ¶ 49). We do not consider Petitioner’s belated argument because it exceeds the proper scope of a reply. A reply may only respond to arguments raised in the corresponding patent owner response. See 37 C.F.R. § 42.23. As explained in the Trial Practice Guide, “respond” “does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Trial Practice Guide at II.I. (December 2025)(citing 37 C.F.R. § 42.23).10 A reply that raises a new issue or belatedly presents evidence may not be considered. See id. For example, a “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Id.” slip op. at 32

  Patent outcomesUS 7,916,180 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 7,916,180
• Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentable
  PTAB · Jul 21, 2026 · IPR2025-00339 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 22, 23, 28, 30, and 33 are unpatentable over Choi, Labaziewicz, and Yu under § 103; claims 1–3, 10–12, 24, 25, and 32 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2-3 years of experience in digital imaging systems,” and that “[l]ess experience may be necessary with additional education, and likewise, less education may be necessary with additional work experience.” Pet. 6 (citing Ex. 1003 ¶¶ 16–19). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’180 Patent Specification and the prior art of record.” slip op. at 20

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Owner to show that Labaziewicz is not prior art because the ’180 Patent is entitled to the earliest August 25, 2004, filing date of the ’854 Provisional Application. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”).” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “We do not agree with Petitioner’s arguments based on retrieval of data from CCD 18A and CCD 18B. Although Matsushima’s CCD drive circuits 20A and 20B are driven synchronously by timing generator 28 (see Ex. 1007 ¶ 27), Matsushima discloses that “accumulated signal charges are retrieved by CCD drive pulses applied by CCD drive circuits 20A and 20B, and are sequentially output from CCD 18A and CCD 18B as voltage signals (analog image signals) corresponding to each signal charge” (see Ex. 1007 ¶ 23) (emphasis added). In other words, regardless of whether CCD drive circuits 20A and 20B are driven synchronously by timing generator 28, Matsushima discloses that voltage signals corresponding to the accumulated 8 Petitioner’s citation erroneously includes ¶¶ 34–36 of Exhibit 1069. CCD 18A and CCD 18B sequentially––not output at the same time or simultaneously.” slip op. at 30

  • Strike new argumentNew argument disregardedDecided for patent owner

    “argues that Matsushima renders obvious this limitation. See id. at 21, 23, 30; PO Resp. 33–34 (“[T]he Petition provides no further explanation why Matsushima renders this limitation obvious.”). In the Reply for the first time, Petitioner asserts that “a POSITA would understand that Matsushima’s disclosure, including its multi-channel architecture, synchronous control of channels, and capturing two images that are scaled versions of the same scene, renders obvious simultaneous acquisition during a frame. Pet. Reply 13 (citing Ex. 1069 ¶ 49). We do not consider Petitioner’s belated argument because it exceeds the proper scope of a reply. A reply may only respond to arguments raised in the corresponding patent owner response. See 37 C.F.R. § 42.23. As explained in the Trial Practice Guide, “respond” “does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Trial Practice Guide at II.I. (December 2025)(citing 37 C.F.R. § 42.23).9 A reply that raises a new issue or belatedly presents evidence may not be considered. See id. For example, a “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Id. Petitioner clarifies that the Petition does not argue inherency. See Pet.” slip op. at 33

  Patent outcomesUS 7,916,180 mixed
  § 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 7,916,180
• Tesla, Inc. v. Intellectual Ventures II LLCAll claims unpatentable
  PTAB · Jun 26, 2026 · IPR2025-00220 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 1–18 are unpatentable under § 103 over Wallen and Berggren because the combined teachings render the claimed subject matter obvious.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “We agree that Patent Owner’s proposed claim construction is wholly unsupported by, and inconsistent with, the language of independent claims 1, 7, and 13, and the aims of the ’670 Patent Specification. See Ex. 1001, 2:3– 25, 9:32–10:5, 12:51–67, 18:54–19:6, 19:26–42, 20:12–26. Moreover, the cited extrinsic evidence––testimony by Patent Owner’s expert Dr. Lomp–– does not support Patent Owner’s proposed construction because it is internally inconsistent and also undermined by Dr. Lomp’s inconsistent deposition testimony. See Ex. 1036, 11:6–17, 12:9–12; Ex. 2010 ¶¶ 40, 48. Similarly, the extrinsic evidence cited by Petitioner (e.g., Exs. 1037, 1038, 2009) undermines Patent Owner’s position emphasizing the intended recipient devices of SIB1. In summary, we decline to adopt Patent Owner’s proposed claim construction because it is unsupported by the claim language, the ’670 Patent Specification, and the cited extrinsic evidence. with the ordinary and customary meaning which does not include limiting SIB1 to an ordinary legacy SIB and excluding MTC specific SIBs or SIBs intended for MTC devices. In addition, we need not construe explicitly any other claim term or phrase. See, e.g., Nidec Motor Corp. 868 F.3d at 1017 (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 13

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a bachelor’s degree from an accredited program in electrical engineering, computer engineering, computer science, or equivalent training, and at least two years of professional experience relating to wireless communication technology” and “[l]ack of professional experience can be remedied by additional education, and vice versa.” Pet. 15–16 (citing Ex. 1003 ¶¶ 19–21). Patent Owner does not dispute Petitioner’s definition. See generally PO Resp. We find that “at least” in Petitioner’s formulation of the level of skill in the art is vague and open-ended. Otherwise, we adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’670 Patent Specification and the prior art of record. slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “filing date. As explained above, the burden of production shifted to Patent Owner to show that Wallen is not prior art because the ’670 Patent is entitled to the earlier January 20, 2012, filing date of foreign priority application GB1201000. See Dynamic Drinkware, 800 F.3d at 1379–1380. For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must . . . convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.” (emphasis omitted)), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). Patent Owner’s arguments fail to meet this burden of production because, aside from addressing a system information block 1, Patent Owner’s arguments do not substantively address how GB1201000 provides written description support for any other limitations of the claimed invention. See PO Resp. 43, 57. Accordingly, Patent Owner has not met its burden of production in coming forward with evidence or argument to show possession of the claimed invention in foreign priority application GB1201000, the burden of production did not shift back to Petitioner, and,” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “primary synchronization signal (PSS), a secondary synchronization signal (SSS), and a physical broadcast channel (PBCH) including a master information block (MIB).” See Pet. 41–42 (citing Ex. 1003 ¶¶ 70–75; Ex. 1005 ¶¶ 76, 77, 83–84). Petitioner implicitly acknowledges that Wallen does not expressly disclose a physical broadcast channel (PBCH), but relies on Berggren for confirming that the LTE standard specifies that a PBCH carries the MIB. See Pet. 42–43 (citing Ex. 1003 ¶ 74; Ex. 1007 ¶¶ 73–75). According to Petitioner, “a person of ordinary skill in the art would have been motivated to transmit Wallen’s MIB using a PBCH as taught by Berggren.” Pet. 43 (citing Pet. 33–38). In particular, Petitioner asserts that a person of ordinary skill in the art “would have been motivated for Wallen’s LTE system to utilize the LTE standard implementation details taught by Berggren,” and “it would have been predictable and beneficial for Wallen’s user equipment to receive the MIB in the [PBCH], as was standard in LTE.” Pet. 34 (citing Ex. 1003 ¶ 58), 37 (citing Ex. 1003 ¶ 63). According to Petitioner, “the combination is nothing more than ‘the predictable use of prior art elements according to their established functions.’” Pet. 38 (citing KSR, 550 U.S. at 417). Based on the entire record developed during trial, we are persuaded by a preponderance of the evidence that Petitioner provides sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to modify Wallen’s broadcast MIB with Berggren’s teachings of using a PBCH for transmitting broadcast MIBs. See Pet. 33–38; KSR, 550 U.S. at 418.” slip op. at 24

  Patent outcomesUS 11,206,670 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 11,206,670
• Samsung Electronics Co., Ltd. v. Anonymous Media Research Holdings, LLCInstitution denied
  PTAB · Mar 24, 2025 · IPR2024-01349 · APJ Frederick C Laney · IPR · Institution

  The Board denied institution because claims 1–13 are entitled to the May 26, 2005 priority date, making the asserted references not prior art and the obviousness grounds unlikely to prevail.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016); see also 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). Thus, if Petitioner has not satisfied the threshold reasonable likelihood standard for institution, then institution will be denied. See id. at 1378–1379.” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “disclosed in the manner provided by the first paragraph of section 112 of this title in an application previously filed in the United States . . . shall have the same effect, as to such invention, as though filed on the date of the prior application.” (emphasis added). “In essence, this means that in a chain of continuing applications, a claim in a later application receives the benefit of the filing date of an earlier application so long as the disclosure in the earlier application meets the requirements of 35 U.S.C. § 112, ¶ 1, including the written description requirement, with respect to that claim.” Technology Licensing Corp. v. Videotek, Inc., 545 F.3d 1316, 1326 (Fed. Cir. 2008). And to determine whether a parent application meets the written description requirement, “the disclosure must be considered as a whole, as the person of ordinary skill in the art would read it, to determine if it reasonably conveys possession” of the claimed invention. Allergan USA, Inc. v. MSN Labs. Private Ltd., 111 F.4th 1358, 1375 (Fed. Cir. 2024) (citation and emphasis omitted); see also Reiffin v. Microsoft Corp., 214 F.3d 1342, 1345–46 (Fed. Cir. 2000) (the purpose of the written description requirement “is to ensure that the scope of the right to exclude . . . does not overreach the scope of the inventor’s contribution to the field of art as described in the patent specification”).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not reached

    “A claim is unpatentable under 35 U.S.C. § 103(a) if the differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) if presented, objective evidence of non-obviousness. See Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966). As previously noted, the first factor regarding the scope of available prior art is the dispositive issue of this Petition, which is largely defined by the effective filing date of the challenged claims.” slip op. at 8

  • PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Denied

    “Because we determine that no inter partes review will be instituted on IPR2024-01350, we find it unnecessary to exercise exclusive jurisdiction over the ’849 patent. See Paper 9, 9. Therefore, Petitioner’s motion for the Board to exercise exclusive jurisdiction over the ’849 patent is denied. Petitioner further requests that all briefing in this proceeding be provided to the Certificates of Correction and Petitions branches for their consideration, citing Patent Owner’s “duties of candor and good faith.” Id. at 2, 10. However, in view of our determination not to institute review in this proceeding, we defer to the Certificates of Correction and Petitions branches to carry out their duly authorized duties. Honeywell Int’l Inc. v. Arkema Inc., 939 F.3d 1345, 1349 (Fed. Cir. 2019).” slip op. at 23

  § 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,719,849
• Samsung Electronics Co., Ltd v. Anonymous Media Research Holdings, LLCInstitution denied
  PTAB · Mar 21, 2025 · IPR2024-01350 · APJ Michael T Cygan · IPR · Institution

  Institution was denied for claims 1–15 because Petitioner did not show the asserted references were prior art; the claims were supported by the ’330 application’s 2005 filing date.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “To prevail on its obviousness challenges, Petitioner must show that the ’848 patent is not entitled to the benefit of the ’330 application. This issue is dispositive because none of the references relied on by Petitioner qualify as prior art if the ’848 patent is entitled to the benefit of the May 26, 2005, filing date of the ’330 application. Pet. 6, 13. We start by explaining why Petitioner bears the burden of persuasion.” slip op. at 9

  • BurdenDecided for patent owner

    “1. The Burden of Persuasion “In an inter partes review . . ., the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.” 35 U.S.C. § 316(e). That burden, termed the burden of persuasion, “is the ultimate burden assigned to a party who must prove something to a specified degree of certainty.” Dynamic Drinkware, LLC v. National Graphics, Inc., 800 F.3d 1375, 1378 (quoting Tech. Licensing Corp. v. Videotek, Inc., 545 F.3d 1316, 1326–27 (Fed. Cir. 2008)). That burden never shifts to the patentee. Id. at 1379. In order for an inter partes review to be instituted, “the information presented in the petition filed under section 311 and any response filed under section 313 [must] show[] that there is a reasonable likelihood that the petitioner would prevail.” 35 U.S.C. § 314(a).” slip op. at 9

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “d) Analysis Petitioner has not shown a reasonable likelihood that it would prevail in showing that its asserted references, including Steuer 750 which is a publication of the ’330 application, are prior art to the ’848 patent. Petitioner has not shown that the ’330 application fails to provide written description support for claim 1 of the ’848 patent, which recites “video data” samples and representations.” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not reached

    “a chain of priority from the ’330 application to the ’848 patent contain at least the same disclosure as the ’330 application, Petitioner has not shown that the ’848 patent should not be given the benefit of the effective filing date of the ’330 application. The May 26, 2005 filing date of the ’330 application predates the December 1, 2005 publication date of Steuer 750, the August 13, 2013 issue date of Steuer 768, and the December 2, 2010 and May 27, 2010 publication and filing dates of Neumeier.10 Pet. 7; Ex. 1005, code (43); Ex. 1006, code (45); Ex. 1007, codes (43), (60).11 Therefore, Petitioner has not shown by a preponderance of the evidence that any of the asserted claims in the ’848 patent would have been obvious over the asserted combinations of Steuer 750, Steuer 768, and Neumeier.” slip op. at 22

  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,719,848
• Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20

  Patent outcomesUS 8,350,294 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 8,350,294
• ROKU, Inc. v. Anonymous Media Research Holdings, LLCInstitution denied
  PTAB · Feb 10, 2025 · IPR2024-01054 · APJ Michael T Cygan · IPR · Institution

  Institution denied for claims 1–15 because Petitioner did not show Seet was prior art, defeating the reasonable-likelihood showing for every asserted obviousness ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons given below, on this record, Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any one of claims 1–15 of the ’768 patent. Accordingly, we do not institute an inter partes review of the ’768 patent.” slip op. at 2

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artDecided for patent owner

    “Petitioner fails to show that the full scope of claim 9 of Seet is described in the Seet provisional. Seet expressly defines the claim term “media,” stating that, as it is “used herein,” “media” includes audio, video, software, and pictures. Ex. 1006 ¶ 50 (“Media content may include one . . . of audio . . ., video . . ., software . . ., and pictures”). Such a statement provides a clear definition of the term “media” that includes video, software, and pictures, in addition to audio. In addition to the express definition, Seet elsewhere indicates that its media includes video and other non-audio signals and databases. See, e.g., Ex. 1006 ¶¶ 26 (“if the media stream 102 is a video broadcast, each media item may comprise a television show or segment, an advertisement, or any other type of video”), 42–46 (creating databases of “videos,” “faces,” and “files”), 49 (“any signal that contains repeating content over any broadcast medium can benefit from the procedure described herein.”). Accordingly, the use of media in claim 9 for its claimed “media content database” and “media stream[s]” also includes both audio and non-audio media.” slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not met its burden to show that Seet is prior art. Seet is not entitled to the benefit of its provisional filing date unless a claim in Seet has written description support in the Seet provisional. See Dynamic Drinkware, 800 F.3d at 1381–82. As the “‘hallmark’ of written description, . . . the disclosure must be considered as a whole, as the person of ordinary skill in the art would read it to determine if it reasonably conveys possession” of the claimed invention. Allergan USA, Inc. v. MSN Laboratories Private Ltd., 111 F.4th 1358, 1375 (Fed. Cir. 2024) (citation and emphasis omitted).” slip op. at 12

  • Skill levelSkill level board ownDecided for patent owner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art [“POSITA”] at the critical time would have had “a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent degree with at least two years of relevant industry experience, including in digital media content delivery.” Pet. 2 (citing Ex. 1003 ¶ 32). Patent Owner argues that the level of ordinary skill should include persons lacking a formal degree but possessing considerable industry experience designing and implementing automated content recognition systems, and that such systems are the relevant industry experience. Prelim. Resp. 6–7. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, modified by the more inclusive standards of Patent Owner, as it appears to be consistent with the specification of the ’768 patent and the prior art of record.” slip op. at 7

  Claim construction§ 102 anticipation§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 8,510,768
• Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentable
  PTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.

  RulingsFinal written decision

  • Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner

    “have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39

  Patent outcomesUS 11,230,430 unpatentable
  § 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,230,430
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Nespresso USA, Inc. v. K-Fee System GmbHInstituted
  PTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution

  Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.

  RulingsInstitution decision

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner

    “Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37

  • Other 314aDecided for petitioner

    “B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40

  § 103 obviousness§ 112 disclosureDiscretionary denial
  Patents in suitUS 11,230,430

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.