- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.Some claims unpatentablePTAB · Nov 25, 2025 · PGR2024-00030 · APJ Linda E Horner · PGR · Final written decision
Claims 17 and 18 are unpatentable under §112(d) for improper dependent form; claims 1–10 and 12–16 were not shown unpatentable on the asserted obviousness grounds.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“We do not credit Dr. Anthony’s testimony, which is based on the arbitrary shading in Figure 7 (see Ex. 1002 ¶ 174), that Schröder teaches or suggests limitation 1[d] because it (1) is inconsistent with Petitioner’s reasoning for limitation 1[c], and (2) it is based on an admitted misreading of the embodiment of Schröder’s Figure 5 (see Ex. 1002 ¶ 175). As to the first item, Dr. Anthony states that “a POSITA would have been motivated to place a battery in a part of the cavity that is far from a PCB holding other electrical components because that configuration allows for better thermal management.” Ex. 1002, para. 175. The problem with this statement is that Petitioner relies on Schröder’s teaching that inlay 12, i.e., the alleged PCB, could include “other electrical components,” such as a battery to support its position that Schröder suggests placing a battery between the ring halves. See, e.g., Pet. Reply 2 (pointing to Dr. Mercier’s depo testimony that inlay 12 with “other components” is inserted between ring halves); id. at 3 (relying on Schröder’s teaching about placing components in depressions on inlay 12). So, Petitioner earlier asserts for the battery limitation 1[c] that Schröder teaches or suggests putting a battery on inlay 12 inside the ring halves, but then for limitation 1[d], Dr. Anthony testifies that a POSITA would place the battery “far” away from the inlay 12 (i.e., the alleged PCB). These positions are inconsistent.” slip op. at 25
- Skill levelSkill level board ownOther
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶¶ 18–22). Petitioner also contends that a person of ordinary skill would have been “familiar with, for example, sensor system design and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 26. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’178 patent and the references cited in the Petition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner indicates that in the related ITC proceeding involving the ’178 patent, the Administrative Law Judge (ALJ) adopted three constructions agreed-upon by the parties in that proceeding8 and also construed two disputed terms.9 Resp. 26–27 (citing Ex. 2016, 5, 6, 14). Patent Owner agrees with Petitioner, however, that no terms need to be construed to decide the issues raised in the Petition. Id. at 27. We reviewed the constructions adopted by the ITC. Ex. 2016, 5, 6, 14. 8 In the ITC proceeding, the ALJ adopted the parties’ agreed-upon constructions that: (1) the preamble of claim 1 [a finger-worn wearable ring device] is limiting; (2) [positioned/configured to fit] within a “cavity” is [positioned/configured to fit] within a “hollow space”; and (3) [the internal housing component] “coupled with” [the external housing component] is [the internal housing component] “connected with” [the external housing component]. Ex. 2016, 5. 9 In the ITC proceeding, the ALJ construed the claims such that: (1) the internal and external housing components of claims 1, 12, and 17 enclose space and do not necessarily exclude potting material; and (2) “circumferential,” as recited in claims 1, 17, and 18, does not require a closed shape. Ex. 2016, 14, 17. These constructions are not germane to the issues we need to decide to resolve this proceeding. Thus, we agree that no explicit claim construction is necessary for this decision. To the extent the parties’ arguments raise any implicit issues of claim construction, we address those issues within the context in which they are raised in our analysis below.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“The record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “Mestas’s batteries, layout, and other components . . . would have to be scaled down 5 to 10 times to be appropriately sized for a finger worn ring.” Resp. 64 (internal quotation marks omitted) (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Moreover, we do not credit Dr. Anthony’s testimony that miniaturization of the battery would have been “trivial to implement.” Ex. 1002 ¶ 242. Dr. Anthony admitted on cross-examination that it would not have been within the level of skill of a person having ordinary skill in the art to design a smaller version of Mestas’s battery, and that such a person would need to procure a battery of the appropriate size and specifications for implementation in a finger-ring from a battery manufacturer. Ex. 2021, 315:9–318:9. Yet Dr. Anthony had not ascertained, for purposes of his testimony, whether there was a battery available in 2013 that was appropriate to fit within the inlay space of the modified version of Schröder’s finger-ring that he and Petitioner allege would have been obvious to one of skill in the art at that time. Id. at 321:5–10. Further, we credit Dr. Mercier’s testimony that Dr. Anthony’s testimony fails to consider the differences in power requirements between Mestas and Schröder or to account for the constraints of such a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶¶ 159–160. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’178 patent, we also have evidence that prior art “finger ring wearables up to the ’178 patent had used ‘coin’ type batteries.” Id. at 66 (citing Ex. 2018 ¶ 161). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would look to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 161. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 61–70. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring-type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 71. Based on these findings, Petitioner has not met its burden to show by a preponderance of the evidence that a person having ordinary skill in the art would have been led to modify Schröder’s finger-ring to place a curved battery between the internal and external housing components in light of the teachings in Mestas. Thus, Petitioner has not met its burden to show by a preponderance of the evidence that dependent claim 3 of the ’178 patent is unpatentable over Schröder and Mestas.” slip op. at 38
Patent outcomesUS 11,868,178 mixedClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,868,178 - Tesla, Inc. v. Iqar Inc.All claims unpatentablePTAB · Sep 18, 2025 · IPR2024-00630 · APJ Sean P O’Hanlon · IPR · Final written decision
Claims 1–16 are unpatentable as anticipated by Koebler and obvious over Koebler alone and in combination with other references.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995) (citing 35 U.S.C. § 120). Section 112 requires, inter alia, that the specification contain a written description of the claimed invention. 35 U.S.C. § 112(a). In determining whether the written description requirement is met, we consider “whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). This analysis requires “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. Thus, “the level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Id. For example, the analysis must consider “the existing knowledge in the particular field, the extent and content of the prior art, the maturity of the science or technology, [and] the predictability of the aspect at issue.” Id. (alteration in original) (quoting Capon v. Eshhar, 418 F.3d 1349, 1359 (Fed. Cir. 2005)). “While a prior application need not contain precisely the same words as are found in the asserted claims, the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008) (citations omitted); see also Purdue Pharma LP v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (“In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.”). However, “it is the specification itself that must demonstrate possession. And while the description requirement does not demand any particular form of disclosure . . . , a description that merely renders the invention obvious does not satisfy the requirement.” Ariad, 598 F.3d at 1352 (citations omitted); see also Lockwood v. Am. Airlines, 107 F.3d 1565, 1572 (Fed. Cir. 1997) (“While the meaning of terms, phrases, or diagrams in a disclosure is to be explained or interpreted from the vantage point of one skilled in the art, all the limitations must appear in the specification. The question is not whether a claimed invention is an obvious variant of that which is disclosed in the specification. Rather, a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.”).” slip op. at 7
- Skill levelSkill level board ownDecided for petitioner
“The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Initially, we note that, although Petitioner presents a definition for “traction” in its Reply (see Pet. Reply 10), Dr. Morellas agreed with Patent Owner’s proposed interpretation during his deposition: Q. What would a person having ordinary skill in the art understand the word “traction” to mean? A. It would mean the grip that the -- that the tire has with the road. Q. So when the tire is gripping the road, the vehicle will have traction; correct? A. Correct. Q. But if the wheels are spinning freely and not gripping the road, the vehicle has no traction; correct? A.· Correct. Ex. 2031, 36:8–17. Accordingly, we adopt Patent Owner’s interpretation of “traction” to be a measure “of the friction between the vehicle’s drive wheels and the road surface” such that “a vehicle’s wheels have ‘traction’ when wheel rotation acts to propel the vehicle along the roadway” and “[t]he vehicle’s wheels lose ‘traction’ when they spin freely relative to the road and thus are no longer acting to propel the vehicle along the roadway.” See PO Resp. 27; see also Tr. 18:4–5 (Petitioner’s counsel stating that “the ultimate disposition doesn’t matter which definition [of ‘traction’ the Board] adopt[s]”).” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“2. Anticipation “Under 35 U.S.C. § 102 a claim is anticipated ‘if each and every limitation is found either expressly or inherently in a single prior art reference.’” King Pharm., Inc. v. Eon Labs, Inc., 616 F.3d 1267, 1274 (Fed. Cir. 2010) (quoting Celeritas Techs. Ltd. v. Rockwell Int’l Corp., 150 F.3d 1354, 1360 (Fed. Cir. 1998)). “Anticipation requires the presence in a single prior art disclosure of all elements of a claimed invention arranged as in the claim.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). A reference inherently discloses an element of a claim “if that missing characteristic is necessarily present, or inherent, in the single anticipating reference.” Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (citing Cont’l Can Co. USA, Inc. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991)). “Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, 593 F.3d at 1332 (quoting Cont’l Can, 948 F.2d at 1269).” slip op. at 28
Patent outcomesUS 10,850,616 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,850,616 - PTAB · Apr 21, 2025 · IPR2024-01489 · APJ Barbara A Parvis · IPR · Institution
The Board instituted IPR on claims 1–30 on all asserted grounds, finding a reasonable likelihood that Cohen anticipates the challenged claims.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To show anticipation under 35 U.S.C. § 102, each and every claim element, arranged as in the claim, must be found in a single prior art reference. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359 (Fed. Cir. 2008); Verdegaal Bros., Inc. v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). Identity of terminology is not required for a claim element to be met directly by the prior art. In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009); In re Bond, 910 F.2d 831, 832 (Fed. Cir. 1990) (citations omitted) (“[T]his is not an ‘ipsissimis verbis’ test.”). For anticipation, we take into account not only the specific teachings of the reference, but also the inferences which one skilled in the art would reasonably be expected to draw therefrom. In re Preda, 401 F.2d 825, 826 (CCPA 1968). B. Level of Ordinary Skill in the Art” slip op. at 13
- Parallel petitionsDecided for petitioner
“Wrinkl, Inc. v. Slack Technologies, LLC, No. 1:24-cv-00620 (D. Del. May 23, 2024). Pet. 1; Paper 4, 1. Patent Owner also states that a “second IPR was filed against the same patent in proceeding IPR2024-01490.” Paper 4, 1. Patent Owner does not argue that we should exercise discretion under 35 U.S.C. § 314(a) because Petitioner uses more than one petition to challenge the ’731 patent. challenges the alleged priority date of the ’731 patent (IPR2024-01489) (‘First Petition’) and the second petition assumes that the Patent Owner’s claimed priority date is valid, and addresses prior art references predating that priority date (IPR2024-01490) (‘Second Petition’).” Ex. 1019, 1. In accordance with the Consolidated Trial Practice Guide1 (“CTPG”), issued in November 2019, “there may be circumstances in which more than one petition may be necessary” including “when there is a dispute about priority date requiring arguments under multiple prior art references.” CTPG 59. Such is the case here. Patent Owner does not file any Preliminary Response or other paper disputing Petitioner’s use of two petitions to challenge the claims of the ’731 patent. Based on the record before us, we consider the merits of both petitions because Petitioner’s stated reasons for filing two petitions are consistent with the CTPG. See generally Ex. 1019 (citing CTPG, 59 (“the Board recognizes that there may be circumstances in which more than one petition may be necessary, including, for example, . . . when there is a dispute about priority date requiring arguments under multiple prior art references)). C. The ’731 Patent” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“reasonable likelihood that it would prevail on a ground of unpatentability. 35 U.S.C. § 314(a); Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3)) (“In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.”). Petitioner first must raise the issue of entitlement to a claimed priority date by “identifying, specifically, the features, claims, and ancestral application or applications allegedly lacking § 112 support for the claims based on the identified features.” Focal Therapeutics, Inc. v. Senorx, Inc., IPR2014-00116, Paper 8 at 9–10 (PTAB Apr. 22, 2014); Mission Integrated Techs., LLC v. Joshua Clemente, IPR2023-01285, Paper 16 at 18 (PTAB Feb. 23, 2024). Then, Patent Owner must make a sufficient showing of entitlement to earlier filing date(s), in a manner that is commensurate in scope with the specific points and contentions raised by the petitioner. See id.” slip op. at 11
- Skill levelSkill level petitioner adoptedOther
“two years of experience in the graphical user interface field” or, alternatively “a master’s degree in computer science (or similar discipline) and at least two years of similar experience.” Pet. 16 (citing Ex. 1003 ¶ 40). We find that “at least” in Petitioner’s formulation of the level of skill in the art is vague and open-ended. Otherwise, we preliminarily adopt Petitioner’s formulation of the level of skill in the art, which appears consistent with the specification and prior art presented. C. Claim Construction” slip op. at 14
Claim construction§ 102 anticipation§ 112 disclosureDiscretionary denialcites PhillipsPatents in suitUS 11,973,731 - PTAB · Dec 6, 2024 · PGR2024-00030 · APJ Elizabeth M Roesel · PGR · Institution
Instituted PGR of claims 1–10 and 12–18; Petitioner met the institution threshold for claim 1 based on obviousness over Schröder.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“In applying § 325(d), we use a two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or presented to the Office; and (2) if either condition of the first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential). We also consider the non-exclusive factors set forth in Becton, Dickinson and Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 (PTAB Dec. 15, 2017) (precedential in relevant part), which “provide useful insight into how to apply the framework” under § 325(d). Advanced Bionics, Paper 6 at 9. Those non-exclusive factors include: (a) the similarities and material differences between the asserted art and the prior art involved during examination; (b) the cumulative nature of the asserted art and the prior art evaluated during examination; (c) the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for rejection; (d) the extent of the overlap between the arguments made during examination and the manner in which Petitioner relies on the prior art or Patent Owner distinguishes the prior art; (e) whether Petitioner has pointed out sufficiently how the Examiner erred in its evaluation of the asserted prior art; and (f) the extent to which additional evidence and facts presented in the Petition warrant reconsideration of the prior art or arguments.” slip op. at 12
- Skill levelSkill level board ownOther
“Level of Ordinary Skill in the Art At this stage of the proceeding, there is no dispute about the level of ordinary skill in the art. Based on the testimony of Petitioner’s declarant, we determine that a person of ordinary skill in the art (“POSITA”) would have had a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, and two years of experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. A POSITA would have been familiar with sensor system design and signal experience, and vice versa. Ex. 1002 ¶ 21. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’178 Patent Specification and the asserted prior art references.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“as would be used by a district court to construe a claim in a civil action involving the validity or infringement of a patent. 37 C.F.R. § 42.200(b). Under that standard, claim terms are given their ordinary and customary meaning, as would have been understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history of record. Id.; Phillips v. AWH Corp., 415 F.3d 1303, 1312–19 (Fed. Cir. 2005) (en banc); Thorner v. Sony Comput. Entm’t Am. LLC, 669 F.3d 1362, 1365–66 (Fed. Cir. 2012). “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We agree with the parties that it is not necessary for us to provide an express construction for any claim term for purposes of determining whether to institute a post-grant review. Pet. 8; Prelim. Resp. 25.” slip op. at 17
- Expert testimonyPetitioner expert creditedOther
“Petitioner relies on Dr. Anthony’s testimony that a POSITA would have understood Figures 6–8 as showing a cavity as recited in claim 1 and the battery must be arranged within that cavity because “[o]therwise, if the battery did not fit within the ‘finger-ring,’ the ‘finger-ring’ either has (1) a battery that sticks out or is exposed to the environment or (2) a wired connection to power its components, which is contrary to the intent of having a portable, wearable device.” Ex. 1002 ¶ 166. Dr. Anthony opines that “[a] POSITA would have understood that the battery’s location within the cavity is the ‘first portion’ of the cavity because the battery necessarily occupies space in the cavity.” Id. ¶ 168. Such testimony, when viewed along with the rest of Petitioner’s showing, provides sufficient basis for institution.” slip op. at 20
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,868,178 - Maplebear Inc. D/B/A Instacart v. Consumeron, LLCAll claims unpatentablePTAB · Nov 20, 2024 · IPR2023-00865 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–19 are unpatentable under § 103 over Carr and Lauka, with additional references for the dependent-claim grounds, because the challenged claims lack priority support in the ’848 application.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Instacart submits that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of electronic commerce” and that “[l]ack of work experience can be remedied by additional education, and vice versa.” Pet. 27 (citing Ex. 1003 ¶¶ 22–25). Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” PO Resp. 7 (citing Ex. 2016 ¶¶ 19–23). But, as Consumeron’s expert acknowledges, Consumeron’s proposed definition “is not materially different” from Instacart’s. See Ex. 2016 ¶ 22. Accordingly, while we adopt the level of skill in the art as defined by Instacart our findings and analysis would be the same under Consumeron’s proposal.” slip op. at 7
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“8 Consumeron argues Dr. Houh’s testimony should be given little weight because he “admitted he did not evaluate what the ’848 Application reasonably conveys to a skilled artisan.” Resp. 26 (citing Ex. 2011, 74:8– 76:6, 83:4–84:1, 92:22–95:5). We disagree. Dr. Houh’s testimony indicates that he properly considered what the ’848 application reasonably conveys to a POSITA. See Ex. 1003 ¶¶ 52, 56, 58, 61, 65. The portions of his cross-examination testimony cited by Consumeron do not suggest otherwise. For the reasons explained below, we credit Dr. Houh’s testimony over the competing interpretations offered by Consumeron and Dr. Mitzenmacher. 9 The dissent criticizes the majority’s analysis as “overly narrow” and too focused on the preferred embodiment. See Dissent 7–8. We disagree. Our analysis considers the entirety of the ’848 application, including all of the passages cited by Consumeron and the dissent.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“But it does not follow that an agent encountering a stock-out would necessarily respond according to the specific steps recited in claims 1 and 14.10 For example, instead of sending information about a replacement product, the agent could travel to another location to look for the same product, or notify the customer that the desired product could not be found and terminate the transaction. Because the ’848 application only contemplates scenarios where a product can be located, it does not describe the agent’s response in the event the identified product cannot be located or is unavailable, much less reasonably convey possession of a method comprising the specific, responsive steps in claims 1 and 14.11” slip op. at 17
- Prior constructionPrior construction adoptedTerm construed petitioner constructionDecided for petitioner
“construed the terms “acquisition request” and “acquiring” in our final written decision in the related 1357 IPR to encompass “not only a request for a delivery agent to shop for and purchase goods, but also a request for the agent to pick up or obtain pre-paid goods.” See 1357 IPR, Paper 35 at 11. It is undisputed that the ’465 patent at issue here and the ’835 patent at issue in the 1357 IPR are related and share essentially identical specifications, figures, and claim terms. See Pet. Reply 16; PO Resp. 38 n.6. Thus, for the same reasons as in our final written decision in the related 1357 IPR, we likewise determine here that Instacart’s construction of “acquisition request” is the correct one. See SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents ‘derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.’” (quoting NTP, Inc., v. Research in Motion, Ltd., 418 F.3d 1282, 1293 (Fed. Cir. 2005)). Consumeron provides no persuasive justification for us to depart from our prior reasoning in the related 1357 IPR.” slip op. at 23
Patent outcomesUS 11,238,465 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 11,238,465 - Bj’S Wholesale Club Holdings, Inc. v. Walmart Apollo, LLCAll claims unpatentablePTAB · Apr 10, 2024 · IPR2022-01564 · APJ Patrick R Scanlon · IPR · Final written decision
Claims 1–14 are unpatentable as anticipated by Keith; the Board did not reach the alternative obviousness ground over Hanson and Keith.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“claims of the later-filed application must be supported by the written description in the parent ‘in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.’” Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1335 (Fed. Cir. 2010) (quoting Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997)). “[T]he hallmark of written description is disclosure,” and the test “is whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date” of that application. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc) (citing Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1562–63 (Fed. Cir. 1991)). “[T]he test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. But, “[i]t is not sufficient for purposes of the written description requirement of [35 U.S.C.] § 112 that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood, 107 F.3d at 1572.” slip op. at 33
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. Inc., v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). Moreover, “[b]ecause the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). Whether a reference anticipates is assessed from the perspective of an ordinarily skilled artisan. See Dayco Prods., Inc. v. Total Containment, Inc., 329 F.3d 1358, 1368 (Fed. Cir. 2003) (“‘[T]he dispositive question regarding anticipation [i]s whether one skilled in the art would reasonably understand or infer from the [prior art reference’s] teaching’ that every claim element was disclosed in that single reference.”). slip op. at 13
- BurdenFwd all claims unpatentableDecided for petitioner
“preponderance of the evidence that the claims are unpatentable. 35 U.S.C. § 316(e) (2018); 37 C.F.R. § 42.1(d) (2022). “In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review).” slip op. at 12
Patent outcomesUS 10,803,435 unpatentable§ 102 anticipation§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,803,435 - PTAB · Nov 21, 2023 · IPR2023-00865 · APJ Carl M Defranco · IPR · Institution
The Board instituted IPR of claims 1–19, finding a reasonable likelihood that claims 1 and 14 are obvious over Carr and Lauka.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION For the above reasons, we determine that the information presented in the Petition demonstrates a reasonable likelihood that at least claims 1 and 14 of the ’465 patent are unpatentable as obvious over Carr and Lauka. And because Instacart demonstrates that at least one claim of the ’465 patent meets the threshold for institution, we institute an inter partes review of all claims as challenged in the Petition. See 37 C.F.R. § 42.108(a),(c); SAS, 138 S. Ct. at 1359–60. IV. ORDER Accordingly, it is: ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of claims 1–19 of the ’465 patent is instituted; and” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” Prelim. Resp. 29. Consumeron’s definition appears to overlap significantly with Instacart’s definition. Accordingly, for purposes of institution, we adopt the level of skill in the art as articulated by Instacart.” slip op. at 5
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“product ordered by the customer is available and does not contemplate a scenario where the product is unavailable or otherwise describe the action to be taken if the product is unavailable. See Pet. 17–22. We agree, at least based on the preliminary record. In particular, with reference to Figures 2 and 3, the ’848 parent application describes a method where (1) a customer chooses “a store where a desired product is being sold” (step 105), (2) the customer selects a delivery agent and sends an “acquisition request” to the delivery agent (steps 108, 109, 110), and (3) “the selected delivery agent travels to the store location . . . and finds the desired product to be acquired” (step 113). Ex. 1011 ¶¶ 17, 20, 23 (emphasis added). “The delivery agent then communicates to the customer that the product has been identified, and the customer has the option of inspecting the product in real-time” (step 117). Id. ¶ 23 (emphasis added). “Next, the customer either approves or rejects acquisition of the inspected product” (steps 119, 120, 122). Id. ¶ 24 (emphasis added). That description in the ’848 parent application clearly presumes that the product ordered by the customer has been located and is available for inspection, which is at odds with the additional requirements of claims 1 and 14 of “failing to locate an identified product” and “determining that the identified product is not available.” Ex. 1001, 11:20 (claim 1), 12:30 (claim 14) (emphases added). To the extent Consumeron argues otherwise, we are not persuaded at this preliminary stage. According to Consumeron, the customer’s rejection of the product means that “the agent fails to locate a product that is satisfactory.” See Prelim Resp. 11. But nowhere do we discern that the ’848 parent application hinges the identity and availability of a product on whether it is satisfactory to the customer. That a product might not meet a customer’s satisfaction does not negate the description in the ’848 parent application that the agent locates and identifies the product in the first instance before giving the customer the option to inspect and reject the product. Indeed, because the customer placed the online order with a store advertising the product, the presumption is that the advertised product is available and satisfactory to the customer.8 And, while conceivably the purchase of a product cannot be fulfilled in the event the product is unavailable, it would seem to be improper hindsight to derive written description support by “[w]orking backward from a knowledge of the claims.” Novozymes A/S v. DuPont Nutrition Biosciences APS, 723 F.3d 1336, 1349 (Fed. Cir. 2013). “Entitlement to a filing date does not extend to subject matter which is not disclosed, but would be obvious over what is expressly disclosed. It extends only to that which is disclosed.” Lockwood v. American Airlines, Inc., 107 F.3d 1565, 1571–72 (Fed. Cir. 1997). Thus, based on the preliminary record, the ’848 parent application does not provide sufficient written description for the terms noted above. As such, we find that Instacart demonstrates a reasonable likelihood it will prevail in showing that the asserted references are prior art to the challenged claims.” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“and Lauka. See Pet. 30–44, 47–49. We begin with Instacart’s challenge of method claim 1. Instacart provides a detailed mapping of how Carr satisfies all the recited limitations of claim 1, except limitation [1.0.3], for which Instacart points to Lauka. See id. at 35–44. In particular, Instacart cites the following evidence in support of its contentions that Carr and Lauka, when combined, teach or suggest each of the recited limitations of claim 1: Limitation 1.0.1—“A method for remote acquisition and delivery of goods through one or more agents of a service provider” (Pet. 35 (citing Ex. 1005 ¶¶ 36, 39, 43, 45, 92, Figs. 1, 3, 6;; Ex. 1001 ¶¶ 97–100)); Limitation 1.0.2—“each agent having a mobile agent system in communication with at least one remote server,” (Pet. 35–37 (citing Ex. 1005 ¶¶ 2, 6, 40–43, 53, Fig. 1 (annotated); Ex. 1003 ¶¶ 101–104)); Limitation 1.0.3—“with each mobile agent system including: a digital image capture device and a communication device, said method comprising:” (Pet. 37–38 (citing Ex. 1005 ¶¶ 74, 88, 94, 122; Ex. 1006, 3:19–28, 3:49–57, 4:10–21; Ex. 1003 ¶¶ 105– 109)); Limitation 1.1—“receiving, through the at least one remote server, a first acquisition request from a customer for a first set of one or more goods;” (Pet. 38 (citing Ex. 1005 ¶¶ 9, 60, 73, Fig. 1; Ex. 1003 ¶¶ 110–112)); Limitation 1.2—“contacting, through the communications device, the one or more agents;” (Pet. 38 (citing Ex. 1005 ¶¶ 57, 74; Ex. 1003 ¶¶ 113–115)); Limitation 1.3—“upon failing to locate an identified product of the set of one or more goods, electronically transmitting information on a replacement product for the identified product of the set of one or more goods to the customer using the digital image capture device of the agent, including:” (Pet. 38–40 (citing Ex. 1005 ¶¶ 90, 95, 96, 105, 107, ; Ex. 1003 ¶¶ 116– 119)); Limitation 1.4—“obtaining a bar or QR code of the replacement product;” (Pet. 40 (citing Ex. 1005 ¶¶ 95, 107; Ex. 1003 ¶¶ 120– 122)); Limitation 1.5—“determining the information from the bar or QR code, wherein the information includes at least one image of the replacement product; and” (Pet. 40–42 (citing Ex. 1005 ¶¶ 95–96, 116; Ex. 1003 ¶¶ 123–127)); Limitation 1.6—“sending the information for the customer to approve the purchase of the replacement product based on the information determined from the bar or QR code; and” (Pet. 42– 43 (citing Ex. 1005 ¶¶ 51, 96–99, Fig. 12; Ex. 1003 ¶¶ 128– 130)); and Limitation 1.7—“upon receiving approval of the purchase from the customer, acquiring the replacement product, via the agent.” (Pet. 43–44 (citing Ex. 1005 ¶¶ 99, 101; Ex. 1003 ¶¶ 131–132)); Instacart also provides a reason why one skilled in the art would have combined the teachings of Carr and Lauka with a reasonable expectation of success. See Pet. 31–34 (citing Ex. 1003 ¶¶ 86–96); see also id. at 37 (“In view of the teachings of Lauka, a POSITA would have recognized that it was obvious to implement the UPC scanner functionality of Carr’s handheld device using an ‘imaging device’ such as that taught by Lauka, which specifies that the ‘imaging device 206 can comprise a video or still camera’ and ‘can be used to capture images.’ Ex.1006, 3:49-57; Ex.1003, ¶¶105- 107.”).” slip op. at 11
Claim construction§ 103 obviousness§ 112 disclosurePatents in suitUS 11,238,465 - Mercedes-Benz USA, LLC v. Westport Fuel Systems Canada Inc.Institution deniedPTAB · Jun 20, 2023 · IPR2023-00351 · APJ Frances L Ippolito · IPR · Institution
The Board denied institution on all challenged claims because the claims receive the provisional’s earlier priority date, making Gottlieb unavailable as prior art.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the Petition and any response thereto shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail in showing the unpatentability of at least one of the challenged claims. Accordingly, we do not institute inter partes review of claims 1–3, 6, 13, 14, 16–22, 26–28, and 41 of the ’138 patent based on the grounds raised in the Petition.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Entitled to earlier dateDecided for patent owner
“Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Likewise, we observe that claim 41 recites that the “hydraulic fluid acts as an incompressible solid so that movement caused by the actuation of said dimensionally responsive member is transmitted through said fluid layer.” Ex. 1001, 20:53–56 (emphases added). Again, the ’791 provisional discloses that the “trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16.” Id. at 12:5–13:14 (emphases added). We find, based on this description of the hydraulic link, with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, it would act as an incompressible solid. Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 12
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“Reading the ’791 provisional’s description of the hydraulic link in conjunction with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, its thickness must remain unchanged, or, in the words of claim 1, be “substantially constant.” Indeed, according to the ’791 provisional, the fluid acts as a solid because O-ring seals and extremely small clearances between needle piston 72 and chamber cap 86 prevent the trapped fluid from flowing around the piston upon actuation of the force, which clearly supports that the thickness of the fluid must remain substantially constant. Those disclosures reasonably convey to one skilled in the art that the inventor had possession of the hydraulic link limitation of claim 1, including it having a substantially constant thickness, as of the ’791 provisional’s filing date. Likewise, we observe that claim 41 recites that the “hydraulic fluid acts as an incompressible solid so that movement caused by the actuation of said dimensionally responsive member is transmitted through said fluid layer.” Ex. 1001, 20:53–56 (emphases added). Again, the ’791 provisional discloses that the “trapped fluid acts as a solid and transmits the movement of the magnetostrictive material 40 to the needle valve 14, causing it to lift against the needle spring 16.” Id. at 12:5–13:14 (emphases added). We find, based on this description of the hydraulic link, with Figure 2, one skilled in the art reasonably would have surmised that, in order for the trapped fluid within the cavity to act as a solid and transmit force, it would act as an incompressible solid. Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot reached
“Petitioner does not further dispute that the ’791 provisional discloses the remaining limitations of the challenged claims. As such, the evidence of record demonstrates sufficient written description support in the ’791 provisional for the challenged claims. Thus, the challenged claims are entitled to an effective filing date of October 15, 1999, which means that Gottlieb does not qualify as prior art. And because Gottlieb forms the basis of all the challenges, its exclusion is fatal to the Petition.” slip op. at 13
§ 102 anticipation§ 112 disclosurePatents in suitUS 6,575,138
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.