• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Tesla, Inc. v. Iqar Inc.All claims unpatentable
  PTAB · Sep 18, 2025 · IPR2024-00630 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–16 are unpatentable as anticipated by Koebler and obvious over Koebler alone and in combination with other references.

  RulingsFinal written decision

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995) (citing 35 U.S.C. § 120). Section 112 requires, inter alia, that the specification contain a written description of the claimed invention. 35 U.S.C. § 112(a). In determining whether the written description requirement is met, we consider “whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). This analysis requires “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. Thus, “the level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Id. For example, the analysis must consider “the existing knowledge in the particular field, the extent and content of the prior art, the maturity of the science or technology, [and] the predictability of the aspect at issue.” Id. (alteration in original) (quoting Capon v. Eshhar, 418 F.3d 1349, 1359 (Fed. Cir. 2005)). “While a prior application need not contain precisely the same words as are found in the asserted claims, the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008) (citations omitted); see also Purdue Pharma LP v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (“In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.”). However, “it is the specification itself that must demonstrate possession. And while the description requirement does not demand any particular form of disclosure . . . , a description that merely renders the invention obvious does not satisfy the requirement.” Ariad, 598 F.3d at 1352 (citations omitted); see also Lockwood v. Am. Airlines, 107 F.3d 1565, 1572 (Fed. Cir. 1997) (“While the meaning of terms, phrases, or diagrams in a disclosure is to be explained or interpreted from the vantage point of one skilled in the art, all the limitations must appear in the specification. The question is not whether a claimed invention is an obvious variant of that which is disclosed in the specification. Rather, a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.”).” slip op. at 7

  • Skill levelSkill level board ownDecided for petitioner

    “The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “Initially, we note that, although Petitioner presents a definition for “traction” in its Reply (see Pet. Reply 10), Dr. Morellas agreed with Patent Owner’s proposed interpretation during his deposition: Q. What would a person having ordinary skill in the art understand the word “traction” to mean? A. It would mean the grip that the -- that the tire has with the road. Q. So when the tire is gripping the road, the vehicle will have traction; correct? A. Correct. Q. But if the wheels are spinning freely and not gripping the road, the vehicle has no traction; correct? A.· Correct. Ex. 2031, 36:8–17. Accordingly, we adopt Patent Owner’s interpretation of “traction” to be a measure “of the friction between the vehicle’s drive wheels and the road surface” such that “a vehicle’s wheels have ‘traction’ when wheel rotation acts to propel the vehicle along the roadway” and “[t]he vehicle’s wheels lose ‘traction’ when they spin freely relative to the road and thus are no longer acting to propel the vehicle along the roadway.” See PO Resp. 27; see also Tr. 18:4–5 (Petitioner’s counsel stating that “the ultimate disposition doesn’t matter which definition [of ‘traction’ the Board] adopt[s]”).” slip op. at 24

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “2. Anticipation “Under 35 U.S.C. § 102 a claim is anticipated ‘if each and every limitation is found either expressly or inherently in a single prior art reference.’” King Pharm., Inc. v. Eon Labs, Inc., 616 F.3d 1267, 1274 (Fed. Cir. 2010) (quoting Celeritas Techs. Ltd. v. Rockwell Int’l Corp., 150 F.3d 1354, 1360 (Fed. Cir. 1998)). “Anticipation requires the presence in a single prior art disclosure of all elements of a claimed invention arranged as in the claim.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). A reference inherently discloses an element of a claim “if that missing characteristic is necessarily present, or inherent, in the single anticipating reference.” Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (citing Cont’l Can Co. USA, Inc. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991)). “Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, 593 F.3d at 1332 (quoting Cont’l Can, 948 F.2d at 1269).” slip op. at 28

  Patent outcomesUS 10,850,616 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 10,850,616
• Maplebear Inc. D/B/A Instacart v. Consumeron, LLCAll claims unpatentable
  PTAB · Nov 20, 2024 · IPR2023-00865 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–19 are unpatentable under § 103 over Carr and Lauka, with additional references for the dependent-claim grounds, because the challenged claims lack priority support in the ’848 application.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Instacart submits that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of electronic commerce” and that “[l]ack of work experience can be remedied by additional education, and vice versa.” Pet. 27 (citing Ex. 1003 ¶¶ 22–25). Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” PO Resp. 7 (citing Ex. 2016 ¶¶ 19–23). But, as Consumeron’s expert acknowledges, Consumeron’s proposed definition “is not materially different” from Instacart’s. See Ex. 2016 ¶ 22. Accordingly, while we adopt the level of skill in the art as defined by Instacart our findings and analysis would be the same under Consumeron’s proposal.” slip op. at 7

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “8 Consumeron argues Dr. Houh’s testimony should be given little weight because he “admitted he did not evaluate what the ’848 Application reasonably conveys to a skilled artisan.” Resp. 26 (citing Ex. 2011, 74:8– 76:6, 83:4–84:1, 92:22–95:5). We disagree. Dr. Houh’s testimony indicates that he properly considered what the ’848 application reasonably conveys to a POSITA. See Ex. 1003 ¶¶ 52, 56, 58, 61, 65. The portions of his cross-examination testimony cited by Consumeron do not suggest otherwise. For the reasons explained below, we credit Dr. Houh’s testimony over the competing interpretations offered by Consumeron and Dr. Mitzenmacher. 9 The dissent criticizes the majority’s analysis as “overly narrow” and too focused on the preferred embodiment. See Dissent 7–8. We disagree. Our analysis considers the entirety of the ’848 application, including all of the passages cited by Consumeron and the dissent.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

    “But it does not follow that an agent encountering a stock-out would necessarily respond according to the specific steps recited in claims 1 and 14.10 For example, instead of sending information about a replacement product, the agent could travel to another location to look for the same product, or notify the customer that the desired product could not be found and terminate the transaction. Because the ’848 application only contemplates scenarios where a product can be located, it does not describe the agent’s response in the event the identified product cannot be located or is unavailable, much less reasonably convey possession of a method comprising the specific, responsive steps in claims 1 and 14.11” slip op. at 17

  • Prior constructionPrior construction adoptedTerm construed petitioner constructionDecided for petitioner

    “construed the terms “acquisition request” and “acquiring” in our final written decision in the related 1357 IPR to encompass “not only a request for a delivery agent to shop for and purchase goods, but also a request for the agent to pick up or obtain pre-paid goods.” See 1357 IPR, Paper 35 at 11. It is undisputed that the ’465 patent at issue here and the ’835 patent at issue in the 1357 IPR are related and share essentially identical specifications, figures, and claim terms. See Pet. Reply 16; PO Resp. 38 n.6. Thus, for the same reasons as in our final written decision in the related 1357 IPR, we likewise determine here that Instacart’s construction of “acquisition request” is the correct one. See SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents ‘derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.’” (quoting NTP, Inc., v. Research in Motion, Ltd., 418 F.3d 1282, 1293 (Fed. Cir. 2005)). Consumeron provides no persuasive justification for us to depart from our prior reasoning in the related 1357 IPR.” slip op. at 23

  Patent outcomesUS 11,238,465 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips
  Patents in suitUS 11,238,465
• Donghee America, Inc. / Donghee Alabama, LLC v. Plastic Omnium Advanced Innovation And ResearchAll claims unpatentable
  PTAB · Dec 11, 2018 · IPR2017-01605 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–3, 7, 11, 12, and 14 are unpatentable: claims 1–3, 12, and 14 are anticipated by Linden, and claims 7 and 11 are obvious over Linden and Hata.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “article whose surface has at least one empty or concave part.” Id. at 11 (citing Ex. 1001, 1:66–67; Ex. 1007 ¶ 15). Patent Owner agrees. PO Resp. 15. The ’253 patent states that “[t]he term ‘hollow body’ is understood to mean any article whose surface has at least one empty or concave part.” Ex. 1001, 1:66–67. Where an inventor defines specific terms used to describe an invention, we will give effect to those definitions, as long as they are set out “with reasonable clarity, deliberateness, and precision,” “so as to give one of ordinary skill in the art notice of the change” in meaning. In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1994). Here, the phrase “is understood to mean,” as used in the ’253 patent, signals that the inventor presents a clear, deliberate, and precise definition. Accordingly, we interpret “hollow body” as having the definition given it in the ’253 patent, “any article whose surface has at least one empty or concave part.”” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “supporting its proposed construction of “incorporate” as “insert.” First, Petitioner argues that the language of the ’253 patent requires a construction of “incorporating” as encompassing “inserting” rather than as limited to “attaching.” Reply 2–4. Both parties argue that the “incorporating” recited in the challenged claims must occur before the mold closes to form the hollow body. PO Resp. 16; Reply 2–3. We agree. Ex. 1001, 6:2–14 (“. . . after said step of incorporating, closing said mould . . .”). Thus, it is important to note the processes that the ’253 patent describes as occurring before, during, and after mold closure. Because “incorporating” must occur before mold closure, the process of “incorporating” may not be limited to any process that the patent describes as occurring during or after mold closure. Petitioner is correct that the ’253 patent describes a process in which a preassembled structure for supporting an accessory “may . . . be fastened by welding to the wall of the hollow body, upon closing the mould,” i.e., during, not before, mold closure. Ex. 1001, 4:23–30. Thus, the language of the ’253 patent does not support construing the term “incorporating” as limited to “attaching.” Petitioner also argues that both parties agreed in the related infringement suit in District Court that the proper construction of “incorporating” under the Phillips standard, used in that forum, was “inserting.” Reply 7–8 (citing Ex. 1010, at Ex. A, 4). Specifically, in that litigation, Patent Owner agreed that the correct construction of “incorporating at least one of an accessory or a duct within the hollow body” was “inserting an accessory or duct into the hollow body.” Ex. 1010, at Ex. A, 4. Here, we apply the broadest-reasonable-interpretation standard. 37 C.F.R. § 42.100(b) (2016). “The broadest reasonable interpretation of a claim term may be the same as or broader than the construction of a term under the Phillips standard. But it cannot be narrower.” Facebook, Inc. v. Pragmatus AV, LLC, 582 F. App’x 864, 869 (Fed. Cir. 2014) (non-precedential). Here, for the term “incorporating,” Patent Owner’s proposed broadest reasonable interpretation (“attaching”) is narrower than the Phillips construction Patent Owner has advanced (“inserting”). Thus, “attaching” cannot be the broadest reasonable interpretation of “incorporating.” Other than Patent Owner’s proposed “attaching” construction, the only construction the parties have proposed either in this case or in the related District Court case is Petitioner’s proposed “inserting” construction. PO Resp. 15–20 (discussing only “inserting” and “attaching” constructions); Reply 2–9 (Petitioner arguing in favor of “inserting”); Ex. 1010, at Ex. A, 4 (both parties proposing “inserting”). The ’253 patent supports such a construction, because it describes at least some of its embodiments as involving only insertion of an object between the sheets that will form the hollow body before mold closure. Ex. 1001, 4:23–30. Accordingly, for the foregoing reasons, we adopt Petitioner’s proposed construction of “incorporating” as “inserting.”” slip op. at 10

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “Finally, Patent Owner directs us to the testimony of Professor Tim Osswald as support for its view that “incorporate” should mean “attach.” PO Resp. 16 (citing Ex. 2001 ¶¶ 40–42). In relevant part, this testimony states that, “[a]fter reading the specification of the ’253 patent, one of ordinary skill in the art would understand and interpret the word ‘incorporating’ to mean ‘fastening’ or ‘attaching’ so that the accessory or duct becomes part of the hollow body.” Ex. 2001 ¶ 42. Professor Osswald does not cite any evidence in support of his testimony. “[C]onclusory, unsupported assertions by experts as to the definition of a claim term are not useful.” Phillips v. AWH Corp., 415 F.3d 1303, 1318 (Fed. Cir. 2005) (en banc). Accordingly, we give little weight to Professor Osswald’s statement regarding the proper construction of “incorporate.” See In re Am. Acad. of Sci. Tech. Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he [PTAB] is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations . . . .” (citations omitted)).” slip op. at 9

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “preform which has at least one opening for that purpose, to be applied to the inside surface of the wall of the expanded hollow body.” Id. at 3:62–4:3. Patent Owner argues that this teaching is insufficient to disclose attaching the surge cup to the wall of the hollow body before the mold closes. PO Resp. 23–24. We agree that Linden does not teach attaching its accessory to the inside wall of the fuel tank before the mold closes around the preform. Instead, in Linden, the mold halves are closed around the preform and the mandrel, and “a suitable blowing agent . . . is introduced under pressure” through the mandrel, causing the preform to expand to press “against the inside wall defining the mold cavity,” and only then is the holding means for the accessory displaced to be brought into contact with the inner wall of the expanded preform, welding the holding means to the wall. Ex. 1003, 7:27–55, 8:11–29, Figs. 1–3. But, as discussed above, we disagree with Patent Owner about the proper construction of “incorporating” in the challenged claims. Claim 1 requires only that an accessory or a duct be “incorporat[ed] . . . within the hollow body” before mold closure occurs, and we construe “incorporating” to mean “inserting,” without requiring “attaching.” Thus, it is unimportant that Linden fails to teach attaching the surge cup to the wall before mold closure. All that is required is that Linden disclose inserting the surge cup into the preform before mold closure, and Linden does disclose this. Id. at 3:62–4:3, 7:27–49, Figs. 1–3. The next question is whether Linden discloses “after said step of incorporating, closing [the mold] in a way which eliminates any interface between said at least one of said accessory or said duct and an external atmosphere outside of the hollow body.” As discussed above, Linden discloses closing the mold halves after placing the additional body within the preform. But Linden discloses that “[a]t its lower end the preform 28 is pressed around the mandrel 14 by virtue of closure of the mold halves 10a and 10b.” Id. at 7:40–42, Fig. 2. Because mandrel 14 is hollow, id. at 6:35–39; 6:46–54, it is not completely clear that closure of Linden’s hollow body around mandrel 14 necessarily eliminates any interface between the additional body inside Linden’s hollow body and the atmosphere outside the hollow body. On the other hand, the closure of the mold described in the ’253 patent occurs with blowing nozzle 6 “positioned between the two parts of the [mold],” and “blowing air is injected under pressure via the nozzle,” which is quite similar to the use of hollow mandrel 14 in Linden. Ex. 1001, 5:50–57. Given the similarity between Linden’s method and the method described in the ’253 patent, we determine that Petitioner has shown by a preponderance of the evidence that Linden discloses the limitation of claim 1 requiring the step of, “after said step of incorporating, closing [the mold] in a way which eliminates any interface between said at least one of said accessory or said duct and an external atmosphere outside of the hollow body.” The final question with respect to claim 1 is whether Linden discloses that the additional body incorporated within the hollow body “is supported by a preassembled structure which comprises at least one device configured to anchor said preassembled structure to an internal wall of the hollow body.” Petitioner argues that Linden’s “[h]olding means 24 is a preassembled structure” in which “leg members 44, 45” have “enlarged foot portion[s] 36.” Pet. 18 (citing Ex. 1003, 9:23–34). We agree. “[H]olding means 24 . . . substantially comprises first and second support or leg members 44, 45,” and “support or leg members 44, 45 are each provided with an enlarged foot portion 36 of substantially plate-like configuration.” Ex. 1003, 9:23–34. Even if Linden’s holding means 24 were not in the aggregate the recited “preassembled structure,” each leg member 44, 45, taken together with its respective foot portion 36 is. Ex. 1001, 4:26–28 (describing a “preassembled structure” as “for example, an arm provided with a tab for fastening to the wall of the hollow body”). Linden’s “foot portions 36 are pressed against the inside surface, which is still hot and thus plastic, . . . of the hollow body . . . thereby to produce a welded joint between the foot portions 36 and the inside surface.” Id. at 9:34–42. Petitioner has shown by a preponderance of the evidence that Linden discloses the limitation of claim 1 requiring that the accessory or duct be “supported by a preassembled structure which comprises at least one device configured to anchor said preassembled structure to an internal wall of the hollow body.”” slip op. at 19

  Patent outcomesUS 7,166,253 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips
  Patents in suitUS 7,166,253
• Texas Association Of Realtors v. Uber Technologies, Inc.All claims unpatentable
  PTAB · Aug 4, 2017 · IPR2016-00615 · APJ Robert L Kinder · IPR · Final written decision

  Claims 1–28 are unpatentable under § 103(a); the contingent motion to amend is denied because substitute claims are obvious and lack written-description support.

  RulingsFinal written decision

  • BurdenFwd all claims unpatentableUnpatentable

    “II. ANALYSIS Petitioner bears the burden of proving unpatentability of the challenged claims, and that burden never shifts to Patent Owner. Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). To prevail, Petitioner must establish the facts supporting its challenge by a preponderance of the evidence. 35 U.S.C. § 316(e); 37 C.F.R. § 42.1(d). Petitioner relies on the Declaration of Michael Goodchild, Ph.D. (Ex. 1010) and the Reply Declaration of Dr. Goodchild (Ex. 1020). Patent Owner does not rely on any supporting declaration or cross-examination testimony. Below, we discuss whether Petitioner has met its burden with respect to claims 1–28. A patent claim is unpatentable under 35 U.S.C. § 103(a) if the differences between the subject matter sought to be patented and the prior art are such that the subject matter as a whole would have been obvious to a person of ordinary skill in the art at the time the invention was made. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). Obviousness is resolved based on underlying factual determinations, including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of nonobviousness,2 i.e., secondary considerations. See Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “First, Petitioner argues that based on the dictionary definition of “demarcate,” the broadest reasonable interpretation of “demarcating” is “‘to determine or mark off the boundaries or limits of’ something.” Id. (quoting Ex. 1013, RANDOM HOUSE WEBSTER’S UNABRIDGED DICTIONARY, (2d ed. 2001), 5); Ex. 1010 ¶¶ 35, 36. Next, Petitioner contends that the broadest reasonable interpretation of “delimiting” is “determining or marking off the boundaries or limits of something, such as by providing a perimeter line or highlighting.” Pet. 7; Ex. 1013, 4; Ex. 1010 ¶¶ 37–39. Petitioner reasons that the Specification provides examples of delimiting “via a perimeter line in any graphical way” and by highlighting. Pet. 7 (citing Ex. 1001, 6:34–39, 8:13–19). Patent Owner does not address these interpretations in its Response, but at oral hearing Patent Owner agrees that Petitioner’s interpretations were “a fair assessment.” Tr. 92:19–94:3. Patent Owner also responds that there was no substantive difference between the two terms – “demarcating” and “delimiting.” Id. at 93:19–29. Petitioner’s proposed interpretations for “demarcating” and “delimiting” are consistent with the claim language, written description of the ’045 patent, and the plain meaning of each term. We therefore interpret “demarcating” to mean “determining or marking off the boundaries or limits of something,” and interpret “delimiting” to mean “determining or marking off the boundaries or limits of something, such as by providing a perimeter line or highlighting.”” slip op. at 9

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art The parties do not argue in the Petition or Patent Owner Response that we should adopt a specific formulation regarding the level of ordinary skill in the art. Dr. Goodchild, however, testifies that a person of ordinary skill in the art at the time of the ’045 patent “would have had a Bachelor of Science degree (or its equivalent), and three years’ experience in the development, management, and use of geographic information systems and related geospatial technologies.” Ex. 1010 ¶ 14. Based on the record presented, including our review of the ’045 patent and the types of problems and solutions described in the ’045 patent and cited prior art, we agree with Dr. Goodchild’s assessment of the level of ordinary skill in the art and therefore adopt it for purposes of this Decision. As noted, we have also considered the cited references as representative of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be evidenced by the cited references themselves).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Petitioner also provides a persuasive rationale for combining the teachings of O’Clair and Tadman. Id. at 9–10, 14–15. Specifically, Petitioner contends both references are in “similar fields,” with both references referring to the mapping application Google Maps, and [a] person of ordinary skill in the art would have found it obvious and desirable at the time of the ’045 Patent’s filing to combine the features of Tadman into O’Clair to achieve, for example, the ability for a “user to conduct a joint query by using both spatial and non-spatial searches” and the other “advanced features” described by Tadman. Id. at 9–10 (quoting Ex. 1010 ¶¶ 50–51). As further explained by Dr. Goodchild, “[t]he combination of O’Clair’s systems and methods with Tadman’s teachings of polygon-based search would yield the predictable and desirable result of a GIS [geographic information] system which allowed a user to obtain search results located with a polygon-shaped area of interest.” Ex. 1010 ¶ 52; see also Tr. 17:17–19:19. In its Response, Patent Owner does not contest Petitioner’s rationale for combining features of Tadman and O’Clair, nor does Patent Owner challenge Petitioner’s rationale for combining any of the prior art. See Tr. 38:21–39:33 (counsel for Patent Owner agreeing lack of motivation to combine is not argued in the Patent Owner Response). We find persuasive Petitioner’s arguments as to why a person of ordinary skill in the art would have had reason to combine the references’ teachings in the manner asserted.” slip op. at 15

  Patent outcomesUS 8,510,045 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 8,510,045
• Motionpoint Corporation v. Transperfect Global, Inc.All claims unpatentable
  PTAB · Jul 15, 2015 · CBM2014-00060 · APJ Bart A Gerstenblith · CBM · Final written decision

  Claims 1–28 are unpatentable for lack of adequate written description under § 112, first paragraph.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “that “hyperlink” is a well-understood term that the ’022 patent uses in accordance with its ordinary meaning. As explained above, the Microsoft Computer User’s Dictionary makes clear that a hyperlink includes a connection to another element or document. Patent Owner points to no persuasive evidence that the ’022 patent describes a hyperlink as separate from this connection such that the connection can be changed with the hyperlink remaining the same. Indeed, the ’022 patent describes “replac[ing] all links in the translated web page 7 with links that point to the translation manager 4” as part of the translation process. Ex. 1001, 3:37–38. Thus, as described in the patent, changing the connection to point to the translation manager requires a new link. This is consistent with the ordinary meaning of a hyperlink as including a specific connection from one document to another element or document. Our preliminary construction of “hyperlink” included “a link or connection” but did not include a recitation of the element or document linked. To resolve the parties’ dispute, consistent with the ordinary meaning and the specification, we conclude, on the full record before us, that one of ordinary skill in the art at the time of the invention would have understood “hyperlink” to mean “a connection between an element in a hypertext document, such as a word, phrase, symbol, or image, and a different element in the document, another hypertext document, a file, or a script.”” slip op. at 10

  • ExcludeMotion to exclude, deniedDenied

    “First, the inter partes reexamination of the ’022 patent is relevant to our consideration of the claim construction issues presented here because claim construction was at issue in the reexamination. Second, we see no risk of undue prejudice that would outweigh the probative value of the documents and evidence submitted in the reexamination. Of note, is that this proceeding is not a jury trial and, thus, the risk of prejudice in this forum is less than what may otherwise exist before a jury. Third, we agree with Petitioner that Exhibit 1013 is not hearsay at least under Federal Rule of Evidence 801(d)(2)(B) because the testimony in Dr. Nakhimovsky’s Declaration was submitted by, and on behalf of, Patent Owner to the Patent Office, thus evidencing that Patent Owner manifested a belief that the statements contained therein were true. Accordingly, Patent Owner’s Motion to Exclude as applied to Exhibit 1013 is denied.” slip op. at 22

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “Patent Owner’s first argument is contrary to our constructions of the term “hyperlink” and the phrase “said hyperlink.” As reflected in our construction, “said hyperlink” in each of independent claims 1, 17, and 26, refers back to the original recitation of “one or more hyperlinks” in the original (untranslated) electronic communication. The portion of the specification relied upon by Patent Owner does not disclose providing translation of said further electronic communications when the original one or more hyperlink is activated. Rather, this disclosure indicates that the translation manager may replace all of the links (i.e., hyperlinks) in the translated web page with links that point to the translation manager. These replaced links are in the translated electronic communication (e.g., web page 7), and not in the original untranslated electronic communication (e.g., web page 2). Thus, this disclosure does not reasonably convey to one of ordinary skill in the art that the inventors had possession of a translation manager that provides translation of further electronic communications when the one or more hyperlinks in the original untranslated electronic communication is activated (i.e., one or more hyperlinks with unmodified destination addresses). See Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc).” slip op. at 25

  • Disclosure Requirements (§112) › Definiteness (Nautilus)Not reached

    “E. Indefiniteness of Claims 23 and 25–28 Under 35 U.S.C. § 112, Second Paragraph Our determination that each challenged claim is unpatentable for lack of an adequate written description renders it unnecessary to reach Petitioner’s contentions that claims 23 and 25–28 of the ’022 patent are indefinite.” slip op. at 31

  Patent outcomesUS 6,857,022 unpatentable
  Claim construction§ 112 disclosurecites Phillips
  Patents in suitUS 6,857,022

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.