- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - Pelican Biothermal, LLC v. Va-Q-Tec AGSome claims unpatentablePTAB · Jun 16, 2023 · PGR2021-00085 · APJ Barry L Grossman · PGR · Final written decision
The Board granted the motion to amend but held amended claim 64 unpatentable as anticipated by NanoCool 98596-type products and obvious over the cited combinations; all other amended claims were not shown unpatentable.
RulingsFinal written decision- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that Petitioner has demonstrated by a preponderance of the evidence that amended claim 64 is unpatentable; FURTHER ORDERED that Patent Owner’s Non-Contingent Motion to Amend is granted for claims 64 and denied for all other amended claims; and” slip op. at 77
- ExcludeMotion to exclude, deniedDenied
“A. Status as Prior Art Is a Substantive Issue, Not an Evidentiary Issue. A motion to exclude is not an appropriate mechanism for challenging the sufficiency of evidence, such as whether a reference qualifies as prior art, or the proper weight that should be afforded an argument. See Flir Systems, Inc. v. Leak Surveys, Inc., IPR2014-00411, Paper 113, 4, 8–9 (PTAB September 3, 2015); PTAB Consol. Trial Practice Guide 79 (Nov. 30 Mr. Zumwalt testifies that other NanoCool products, designated by product number 85430 and 98630, also have the same configuration as the 98830 product and are made by the same process. Thus, “the 98830, 85430, and 98630 products can be collectively referred to as ‘98830-type’ products all having the same relevant design.” Ex. 1030 ¶ 17. 2019) (“A motion to exclude . . . may not be used to challenge the sufficiency of the evidence to prove a particular fact. A motion to exclude is not a vehicle for addressing the weight to be given evidence—arguments regarding weight should appear only in the merits documents.”); Caterpillar Inc. v. Wirtgen Am., Inc., IPR2017-02187, Paper 42,17 (PTAB May 21, 2019) (status as prior art “is a substantive issue, not an evidentiary issue.”) Thus, whether the NanoCool 98830 product is prior art is not the proper basis for Patent Owner’s Motion to Exclude evidence concerning the NanoCool 98830 product.” slip op. at 29
- Skill levelSkill level board ownOther
“Neither Petitioner nor Mr. Harber provide any analysis of the factors pertinent to a determination of the level of ordinary skill, identified above, to support their conclusory statements. We give Mr. Harber’s conclusory testimony minimal probative weight. 37 C.F.R. § 42.64(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Moreover, there is no persuasive evidence to which we have been directed of the need for specific education or experience in biological or chemical technologies related to the claimed containers and inserts.” slip op. at 26
- Expert testimonyPetitioner expert discountedDecided for patent owner
“With regard to the level of ordinary skill in the art, Petitioner asserts that a person of ordinary skill would have had “a bachelor’s degree or higher degree in biological, chemical or mechanical engineering, or related sciences, and at least two to five years of experience in designing and testing ISCs [insulated shipping containers] depending on education level.” Pet. 9 (emphasis added) (citing Ex. 1002 ¶¶ 23–24). Exhibit 1002 is the Declaration testimony of Mr. Paul Haber. Mr. Harber actually states a slightly different level of ordinary skill. Mr. Harber testifies: The hypothetical POSITA would have: (i) at least a bachelor’s degree in biological, chemical or mechanical engineering, or related sciences, and have at least three to five years of experience in designing and testing ISCs [Insulated Shipping Containers][29]. Such a person may also have (ii) a higher level degree, such as a PhD and/or Master’s degree in engineering, or related sciences, and have at least two to three years of experience in designing and testing ISCs. 29 See Ex. 1002 ¶ 23. Ex. 1002 ¶ 24 (emphasis added). Mr. Harber also testifies that “[t]hese descriptions are approximate, and a higher level of education or specific skill might make up for less experience, and vice-versa.” Id.” slip op. at 25
Patent outcomesUS 10,766,685 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 10,766,685 - Carrier Fire & Security Americas Corporation v. Sentrilock, LLCSome claims unpatentablePTAB · Sep 14, 2022 · IPR2021-00664 · APJ Ryan H Flax · IPR · Final written decision
Claims 23, 24, 28, 29, 35, 37, and 39–47 are unpatentable as obvious over Mosgrove, Harold, and Imran; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“ORDINARY SKILL IN THE ART Petitioner proposes that a person of ordinary skill in the art would have been “a person with at least a Bachelor’s degree in Electronics, Electrical, or Mechanical Engineering or related discipline, [and/]or at least three years of experience working with access control devices.” Pet. 8 (citing Ex. 1002 ¶ 19).10 Such a person of ordinary skill in the art could have both this level of education and experience without straying from Petitioner’s definition. Patent Owner neither contests Petitioner’s proposed definition of the ordinarily skilled artisan nor proposes an alternative. See generally Resp. Patent Owner’s witness, however, expressly adopts Petitioner’s definition. Ex. 2015 ¶ 20. We likewise adopt Petitioner’s proposed definition of the level of ordinary skill in the art and apply it here.11 hindsight, and is biased in favor of Petitioner because of employment history, and, hence, we should give his testimony “no weight.” See Resp. 9– 19. We do not agree with Patent Owner’s positions. The evidence shows that Mr. Comerford is qualified to testify on the issues in this proceeding, and we find his opinions are based on his understanding of the perspective of the ordinarily skilled artisan, his experience, the ordinary meaning of claim terms, and the disclosures of the prior art, are supported by evidence, and do not rely on the ’541 patent as a roadmap so as to infect his opinions with improper hindsight. See generally Ex. 1002; Ex. 1028; Ex. 1029. 10 We understand Petitioner’s proposed definition of the ordinarily skilled artisan to be inclusive regarding education and experience because such is reflected in Mr. Comerford’s cited testimony. See Ex. 1002 ¶ 19 (“I am such a person.”). 11 The parties use the acronym POSA to refer to the person of ordinary skill in the art. See generally Pet.; Resp.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Petitioner states that “[f]or purposes of this IPR, Petitioner does not believe any claim term requires a construction in order to resolve if the Challenged Claims are unpatentable based on the prior art presented.” Pet. 21. Patent Owner indicates it agrees with Petitioner “that the terms of the Challenged Claims should be understood as written.” See Resp. 6–7. We agree with the parties and determine that no claim term requires express construction. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that only claim terms that are in controversy need to be construed and “only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (applying Vivid Techs. in the context of an inter partes review). C.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“In order to gain the benefit of the filing date of an earlier application under 35 U.S.C. § 120, each application in the chain leading back to the earlier application must comply with the written description requirement of 35 U.S.C. § 112.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1571 (Fed. Cir. 1997); see also 35 U.S.C. § 119(e)(1) (benefit of provisional application’s filing date requires disclosure of claimed invention “in the manner provided by the first paragraph of section 112”); Dynamic Drinkware, 800 F.3d at 1381–82 (“A reference patent is only entitled to claim the benefit of the filing date of its provisional application if the disclosure of the provisional application provides support for the claims in the reference patent in compliance with § 112, ¶ 1.”). “Entitlement to a filing date does not extend to subject matter which is not disclosed, but would be obvious over what is expressly disclosed. It extends only to that which is disclosed.” Lockwood, 107 F.3d at 1571–72. We agree with Petitioner that the ’773 provisional does not describe the key identification tag/device required by all claims so as to satisfy § 112. Such a component is described by the ’400 patent as the RFID tag. See Ex. 1006, Fig. 5 (element 74). The ’773 provisional, on the other hand, describes nothing that could be considered the claimed key identification tag or device “for attachment to the at least one key” as recited by claim 23 or “attaching a key identification device to a key” as recited by claim 45. Ex. 1002, 23:1–5, 24:32–35. Nothing in the ’773 provisional hints that anything, be it a tag or generic device, is attached to its otherwise disclosed key; therefore, we cannot agree with Patent Owner’s arguments. See generally Ex. 1005. The ’773 provisional merely indicates that a key can be contained in, removed from, and replaced in a key container module that can somehow sense the key’s presence, but provides no description as to how this sensing is accomplished, and certainly does not describe that anything attached to the key allows this sensing. Id. ¶ 4. slip op. at 16
- Strike new argumentNew argument disregardedDecided for patent owner
“In our Trial Practice Guide we explain that a “[p]etitioner may not submit new evidence or argument in [a] reply that it could have presented earlier, e.g.[,] to make out a prima facie case of unpatentability.” Patent Trial and Appeal Board Consolidated Trial Practice Guide 73 (Nov. 2019)14 (“CTPG” or “Trial Practice Guide”) (citing Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1077–78 (Fed. Cir. 2015)). The Trial Practice Guide further explains that “‘[r]espond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing,” and “[w]hile replies and sur-replies can help crystalize issues for decision, a reply or sur-reply that raises a new issue or belatedly presents evidence may not be considered.” Id. at 74. “In most cases, the Board is capable of identifying new issues or belatedly presented evidence when weighing the evidence at the close of trial, and disregarding any new issues or belatedly presented evidence that exceeds the proper scope of reply or sur-reply.” CTPG 80 (Nov. 2019). The Board has regularly shown this capability. See Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369–70 (Fed. Cir. 2016) (The Board refusing to consider reply brief arguments advocating a “new theory” of unpatentability under 37 C.F.R. § 42.23(b)); Apple Inc. v. e-Watch, Inc., IPR2015-00412, Paper 50, 44 (PTAB May 6, 2016) (“Accepting . . . 14 Available at www.uspto.gov/TrialPracticeGuideConsolidated. belatedly presented new arguments would be unjust to the Patent Owner and we decline to do so.”). Thus, we find any suggestion by Petitioner that Mosgrove’s entire key container or key compartment is the conductive container of Diaferia is a new and late argument, which we will not consider. Likewise, we find any suggestion by Petitioner that some sort of wire or cable (or something of that nature) might be used to connect a key put inside a conductive container to a key tag that is outside that conductive container so that the tag might be inserted into a key-sensing circuit is also a new and late argument, which we will not consider.” slip op. at 30
Patent outcomesUS 7,949,541 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,949,541
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.