- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther
“On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 10,689,740 - PTAB · Jun 20, 2023 · PGR2023-00008 · APJ Kristina M Kalan · PGR · Institution
The Board instituted post-grant review of claims 1–13 on all petitioned grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute post-grant review, we must determine that the information presented in the Petition, “if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one of the challenged claims of the ’624 patent is unpatentable. Thus, we institute post-grant review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“evaluated the subject matter of Riis during examination of the ’624 patent, we agree that Riis was before the Office, as discussed in connection with our analysis of the first part of the Advanced Bionics framework, above. Examiner T presumably was aware of Riis by virtue of having initialed an IDS containing Riis in the ’624 patent’s application and also by virtue of having initialed an IDS containing Riis in the ’067 Application, but Examiner T did not apply Riis in connection with the examination of the ’624 patent. On this record, Patent Owner also fails to show that the claims of the child application leading to the ’624 patent are substantially similar to those of the parent ’814 patent in which Examiner S considered Riis, and, thus, consideration of Riis during the prosecution of the ’814 patent does not equate to consideration of Riis during the prosecution of the ’624 patent. Regarding Patent Owner’s argument (2) that Petitioner fails to sufficiently show how the Examiner erred in evaluating the prior art, we find Petitioner’s arguments demonstrate that Examiner T, the examiner of the ’624 patent, did not apply Riis (or Wypych or Tatarka) during the examination of the’624 patent. As Petitioner argues, the error lies in that “the Examiner failed to consider the relevance of Riis as it applied to the pending method claims,” because although “Riis was considered during examination of the parent ’999 application, Riis was not similarly considered during examination of the ’018 application which led to the ’624 patent.” Pet. 76–77. We determine that the circumstances here demonstrate that the Examiner erred in evaluating the prior art.” slip op. at 12
- PTAB / AIA Trials › Real party in interest / privityNot reached
“35 U.S.C. § 322(a)(2) to deny institution, arguing that the Petition fails to identify every RPI. Prelim. Resp. 10–11, 56–60. Patent Owner argues that the Petition “should also have identified its parent corporation, Huhtamäki Oyj . . . as well as the related corporation Huhtamaki, Inc. . . . as RPIs to comply with the statutory requirements for a PGR.” Id. at 10. On this record, we determine that we need not address whether Huhtamäki Oyj and Huhtamaki, Inc. are unnamed RPIs because, even if they were, it would not create a time bar or estoppel under 35 U.S.C. § 325. See SharkNinja Operating LLC v. iRobot Corp., IPR2020-00734, Paper 11 (PTAB Oct. 6, 2020) (precedential); Lumentum Holdings, Inc. v. Capella Photonics, Inc., IPR2015-00739, Paper 38 at 6 (PTAB Mar. 4, 2016) (precedential) (Board’s jurisdiction to consider a petition does not require a “correct” identification of all RPIs in a petition); see also Blue Coat Sys., Inc. v. Finjan, Inc., IPR2016-01444, Paper 11 at 10 (PTAB July 18, 2017) (“evidence [of failure to identify all RPIs] is, at best, suggestive regarding an issue that is not jurisdictional”); Mayne Pharma Int’l Pty. Ltd. v. Merck Sharp & Dohme Corp., 927 F.3d 1232, 1240 (Fed. Cir. 2019) (“[I]f a petition fails to identify all real parties in interest . . . the Director can, and does, allow the petitioner to add a real party in interest.” (quoting Wi-Fi One, LLC v. Broadcom Corp., 878 F.3d 1364, 1374 n.9 (Fed. Cir. 2018) (en banc))). Here, notwithstanding the arguments devoted to the RPI issue in the Preliminary Response, Preliminary Reply, and Preliminary Sur-Reply, we are not persuaded that Petitioner is barred or estopped from this proceeding, or that Petitioner purposefully omitted Huhtamäki Oyj or Huhtamaki, Inc. to gain some advantage. As Petitioner argues, the “RPI analysis is not necessary at institution, because Patent Owner has not alleged Petitioner would be time barred or otherwise estopped based on unnamed RPIs.” Prelim. Reply 5 (quoting SharkNinja, IPR2020-00734, Paper 11 at 18). As SharkNinja states, certain Board decisions go through extensive analysis to determine whether parties should have been named as RPIs, whereas other Board decisions determine that “such a lengthy exercise is unnecessary for the purposes of rendering a decision on institution of trial.” SharkNinja, IPR2020-00734, Paper 11 at 19. Here, as in SharkNinja, we find the latter approach better serves the interest of cost and efficiency. Thus, at this time and on this record, we will not consider whether Huhtamäki Oyj or Huhtamaki, Inc. must be named as RPIs.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“of the invention “would have had a relevant technical degree in Chemical Engineering, Polymer Science, Materials Science, or the like, and 2–3 years of experience in laminate or film manufacture or similar packaging manufacture and that less experience may be necessary with additional education and vice versa.” Pet. 17 (citing Ex. 1003 ¶¶ 66–72). In its 4 Neither Patent Owner nor Petitioner appear to present any evidence directed to secondary considerations. See generally Pet.; Prelim. Resp.; Prelim. Reply; Prelim. Sur-Reply. Preliminary Response, Patent Owner does not contest Petitioner’s asserted level of ordinary skill in the art. See generally Prelim. Resp. We adopt Petitioner’s definition, which is consistent with the level of skill in the art at the time of the invention as reflected by the prior art and the ’624 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 17
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham · NautilusPatents in suitUS 11,260,624
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.