- Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - Askeladden, L.L.C. v. Ohva, Inc.All claims unpatentablePTAB · Mar 10, 2025 · IPR2023-00921 · APJ Amee A Shah · IPR · Final written decision
Claims 1–4 are unpatentable as obvious: claim 1 over Cho, Aaron, and Carpenter; claim 2 over those references and de Geer; claim 3 over Cho and Aaron; and claim 4 over Cho, Aaron, and de …
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“application are similar, as indicated by the redline comparison of two provided as Exhibit 1015. Critically, however, the “Summary of the Invention” sections are completely different. Id. at 2–4. The question is whether one of ordinary skill in the art would have understood with reasonable clarity, without the benefit of the Summary added for the ’286 patent/’674 application, that the ՚030 application describes a smart telephone that executes coded instructions to “convert the analog variable voltage audio signal received at the microphone port to the transaction data as digital data.”” slip op. at 43
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“Here, although the ’286 patent distinguishes “account data” from “transaction data” in the embodiment of Figure 11, the “transaction data” is submitted by the user to perform a series of banking transactions after manually entering a PIN code, whereas the “account data” is stored on the server, and the token information is accepted from the smart card’s 1001, 10:12–18, 10:30–35, 10:40–42, 11:21–22, 11:65–12:4, 12:22–36. Thus, the claimed “transaction data” that is “accepted . . . from an output interface of a transaction card” and “accepted . . . from a transaction card at an input interface of the card reader,” as recited in independent claims 1 and 3, comprises data stored on and read from a card, such as an ID number, password, authentication information, or session information, that can be used to facilitate a transaction. The evidence indicates that the claimed “transaction data” is distinct from the “transaction data B1-Bn” described in connection with the Figure 11 embodiment.” slip op. at 24
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“As discussed above in Section II.C, we construe the term “transaction data” as encompassing any data involved in a transaction, including account data. Again, we emphasize that claim 1 requires that the transaction data is accepted by the card reader from an output interface of the transaction card. Cho provides that card reader 230 reads a digital signal that includes account information of card 130 whereby the account information “may include at least one of an account number, a card expiration data, etc.” Ex. 1005, 5:54–58. We further agree with Petitioner that to the extent “transaction data” is for the purpose of conducting banking transactions, Cho’s account data of a credit card number and expiration date can perform that purpose. Patent Owner’s arguments that the transaction data cannot be “static” and that claim 1 requires “processing actual transaction-specific data” are not commensurate with the scope of the claim 1. The claim does not recite any limitations that the transaction data be dynamic or “not static,” nor does it recite any processing of the transaction data outside of using it to “facilitate transactions.” Petitioner has shown that Cho teaches the claimed transaction data.” slip op. at 55
Patent outcomesUS 9,679,286 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 9,679,286 - MPL Brands NV, Inc. v. Buzzballz, LLCInstitutedPTAB · Jan 27, 2025 · IPR2024-01098 · APJ Cynthia M Hardman · IPR · Institution
The Board instituted IPR on all challenged claims 1–6 based on all asserted grounds, finding a reasonable likelihood that Kick anticipates or renders them obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the briefing and cited evidence of record in view of this standard, we institute an inter partes review. The following preliminary findings of fact and conclusions of law are made solely to determine whether to institute review. Any final decision will be based on the full trial record.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“challenged claims 1, 2, and 6 lack adequate written description support in the ’934 application as filed. See Pet. 10–11. The specification, figures, and claims as originally filed do not disclose any volume limitations. See Ex. 1004 (’934 prosecution history), 1–17. Instead, the volume limitations recited in the challenged claims find their first support in Figure 7, which was filed over one month after the ’934 application was originally filed. Compare id. at 1–17, with id. at 34–56. The addition of new matter during prosecution of a patent application is prohibited. See 35 U.S.C. § 132(a) (“No amendment shall introduce new matter into the disclosure of the invention.”); see also 37 C.F.R. § 1.121(f); Manual of Patent Examining Procedure (“MPEP”) § 608.04. Therefore, we agree with Petitioner that “the new matter improperly added during the prosecution of the ’934 application cannot be considered part of the disclosure of the original, April 19, 2010 application and/or relied upon for claiming priority in subsequent applications.” Pet. 9.” slip op. at 21
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedDecided for petitioner
“prosecution history), 34. We agree with Petitioner that “any claims in the subsequent applications that recite the new matter [are] entitled to, at the earliest, a priority date of February 25, 2020—the filing date of the ’195 application.” Pet. 10. As discussed above, challenged claims 1, 2, and 6 recite volume limitations that first find adequate support in Figure 7 of the ’195 application. Accordingly, on this record (and after consideration of Patent Owner’s arguments, discussed below), we determine that the priority date of the challenged claims is no earlier than the February 25, 2020, filing date of the ’195 application. Id. at 10–11. We agree with Petitioner that “Kick is prior art under 35 U.S.C. § 102(a)(1) with respect to the claims of the ’904 patent because it was published more than one year before the February 25, 2020, priority date of the challenged claims.” Pet. 16.” slip op. at 22
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“On this record, we find that the issues the parties raise regarding limitation [1z] are highly fact-intensive and implicate genuine issues of material fact that are more appropriately resolved on a fully-developed record. Accordingly, on this record we reserve judgment on these arguments, to allow the record to develop during trial.” slip op. at 30
§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,738,904 - MPL Brands NV, Inc. v. Buzzballz, LLCInstitutedPTAB · Dec 18, 2024 · PGR2024-00035 · APJ Cynthia M Hardman · PGR · Institution
The Board instituted PGR on all asserted grounds after finding the patent eligible for PGR and each challenged claim more likely than not unpatentable under at least one obviousness ground.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level). However, we find some ambiguity in the last sentence of Petitioner’s proposal (“A POSITA could substitute additional education for industry experience and vice versa.”) because the reference to “additional education” is not tethered to relevant education. Accordingly, we modify the last sentence of Petitioner’s proposal to clarify that the additional education must be relevant. Thus, we restate that for purposes of this Decision, a person of ordinary skill in the art of the ’441 patent would have had: (i) an associate’s or bachelor’s degree in mechanical, industrial or manufacturing engineering and (ii) at least two to three years of practical experience with designing or manufacturing mechanical products such as food or beverage packaging. A POSITA could substitute additional relevant education for practical experience and vice versa. B. Post-Grant Review Eligibility As a threshold matter, we must determine whether Petitioner has” slip op. at 11
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateDecided for patent owner
“In view of the evidence discussed above, we agree with Patent Owner that there is adequate written description support for a transparent container body such that a depression in the container base is “visible through at least a portion of the container body,” as recited in claims 9, 10, 15, and 16. Prelim. Resp. 9. Regarding Petitioner’s assertion that the ’441 patent does not disclose “a transparent/translucent liquid” (Pet. 7), we again disagree. As Patent Owner points out, “the ’441 Patent mentions beverages, such as ‘beer and soda,’ as liquids for which the claimed container would be suitable.” Prelim. Resp. 10 (quoting Ex. 1001, 1:25–27). Patent Owner demonstrates that a person of ordinary skill in the art “would have recognized that beer is typically see-through, or translucent.” Id. (citing Ex. 2012 (Till) ¶ 24 (discussing an inspection apparatus for bottles that “are filled with a transparent liquid (e.g. beer, table water, mineral water, wine etc.)”); Ex. 2013 (Schnuckle) ¶ 8 (noting “translucent to transparent liquids such as water, soda, juice, or the like”)). We agree with Patent Owner that the ’441 patent’s identification of “beer and soda as beverages the described and claimed container was intended to hold” provides adequate written description support “for having transparent or translucent liquids within the container.”12 Prelim. Resp. 10. For the reasons discussed above, on this record Petitioner has not demonstrated that claims 9, 10, 15, and 16 include subject matter having a November 10, 2023, priority date. Thus, Petitioner has not demonstrated that the ’441 patent is eligible for post-grant review under AIA § 3(n)(1)(A).” slip op. at 15
- Expert testimonyPatent owner expert discountedDecided for petitioner
“Patent Owner’s arguments are unavailing. As an initial matter, Mr. Kirkpatrick is opining about a design patent application, and Patent Owner has not established that Mr. Kirkpatrick possesses the education and experience of a designer of ordinary skill in the art of ornamental aspects of containers for storing liquids or solids. See Ex. 2001 ¶ 5 (implying that Mr. Kirkpatrick is a generalist whose experience with design patents is in preparing formal drawings of designs invented by others).17 For this reason alone, on this record we accord Mr. Kirkpatrick’s declaration little weight on the question of whether the ’195 parent application provides adequate written description support for originally-filed Figure 2 of the ’813 design application. See, e.g., Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022) (“To offer expert testimony from the perspective of a skilled artisan in a patent case . . . a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.”). Even if Mr. Kirkpatrick’s opinions were relevant, they would not change our conclusion regarding lack of adequate written description. Mr. Kirkpatrick attributes the differences between the drawings to “choices in drafting strategy of the respective illustrators,” such as how to use “contour lines to illustrate sloped surfaces” and how much detail to include for well-known features like pop-tops. See Ex. 2001 (Kirkpatrick Decl.) ¶¶ 19, 23–24, 28–32.18 These arguments are unavailing. First, there is no evidence of record indicating that the figures in the ’195 parent application and ’813 design application were created by different illustrators. Second, 17 Patent Owner also has not established that Mr. Kirkpatrick possesses the education and experience of a person of ordinary skill in the art of the ’441 patent, as we have defined it here. Supra Section II.A. 18 Mr. Kirkpatrick’s analysis of a photograph of a can submitted by the applicant during prosecution (see Ex. 2001 (Kirkpatrick Decl.) ¶¶ 25–32) is additionally unavailing because there is no evidence of record indicating that the patent illustrator(s) used this particular photograph or the depicted can to create the patent illustrations. we agree with Petitioner that even if different illustrators employ different drafting strategies, this “does not absolve Patent Owner’s responsibility not to add new matter.” Prelim. Reply 6.” slip op. at 28
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Because the ’441 patent is eligible for post-grant review, we turn to an analysis of whether the Petition demonstrates “that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). C. Petitioner’s Grounds of Alleged Unpatentability As noted above in Section I.E, Petitioner asserts four different obviousness grounds. At this stage of the proceeding, Patent Owner does not address the merits of Petitioner’s obviousness grounds. See generally Prelim. Resp. For the reasons discussed below, we determine that Petitioner has demonstrated that it is more likely than not that the challenged claims are unpatentable based on the asserted grounds.” slip op. at 34
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,932,441 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - PTAB · Aug 16, 2024 · IPR2023-00658 · APJ Scott A Daniels · IPR · Final written decision
The Board canceled original claim 1, denied the proposed substitute claim as indefinite under § 112, and did not reach the asserted obviousness grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We have, on the complete record now before us, mainly the testimony of Petitioner’s declarant, Mr. Hatch, who testifies that the designer of ordinary skill in the art would be a person who has a bachelor’s degree in furniture design or an equivalent field or alternatively two years of practical experience designing furniture . . . [which] is appropriate given the relatively simple nature of the design at issue, which involves little more than two boards forming a tabletop. Ex. 1002 ¶¶ 34–35. Based on the complete record, we adopt Petitioner’s articulation of a designer of ordinary skill as it is supported by the testimony of Mr. Hatch. Id. ¶¶ 33–38. We also note that, based on the complete trial record, our” slip op. at 18
- Expert testimonyPetitioner expert creditedDecided for petitioner
“In contrast, Patent Owner’s declarant, Mr. Williams, testifies based on his “experience[,] that tenons are generally included in the larger portion of two table top portions.” Ex. 2006 ¶ 55. However, Mr. Williams’ experience does not explain why an ordinary observer would understand such functional and ornamental characteristics of tenon and hole arrangements. Id. Nor does this testimony proclaim that tenons must be in the larger of two table top potions. Indeed, even considering an ordinary observer imbued with Mr. Williams’ level of expertise and experience, and understanding for instance that it may be more likely that the wider portion includes tenons, this does not resolve the glaring inconsistency that Figure 1 illustrates holes and Figure 8 illustrates tenons. In other words, Mr. Williams’ “experience” does not resolve the visible tension that, on one hand, Figure 1 illustrates holes as part of the claimed ornamental design in the wider portion of the table top, and on the other hand, Figure 8 illustrates tenons as part of the same wider portion of the table top. The problem here may be more eloquently explained as “Two roads diverged in a yellow wood[,] And sorry I could not travel both.” Robert Frost, The Road Not Taken, The Poetry of Robert Frost—The Collected Poems, 105, Henry Holt and Co. (1969). Considering the entire record before us in this case we credit Mr. Hatch’s testimony. The issue is not, as Patent Owner has framed it, whether “[o]ne of ordinary skill in the art would understand how the tenons and holes should be positioned on each of the table top portions.” Reply Opp. 7. The question is whether a person of ordinary skill in the art viewing the design for a table top in the proposed substitute claim as would an ordinary observer, understand whether or not the wider portion of the table top as Figures 1 and 6, holes. As Mr. Hatch persuasively explains, in the proposed substitute claim a majority of the drawings for the wider portion, i.e., Figures 1–6, omit the tenons added in Figure 8. Ex. 1011 ¶ 37 (Mr. Hatch testifying that “Figure 8 is the only amended figure that adds tenons/dowels.”) Indeed, Figures 1 and 6 not only fail to illustrate tenons, but actually are amended to include holes rather than tenons, as described in the Motion to Amend. See, e.g., Motion to Amend 6 (Patent Owner describing, “Figure 1: Removal of disclaimer of a total of four holes by amending the outline of the four holes from broken lines to solid lines.”). On the complete record in this proceeding, we determine that a” slip op. at 28
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“On the complete record in this proceeding, we determine that a designer of skill in the art considering the claim from either their own, or the perspective of an ordinary observer, would be uncertain whether the wider portion of the claimed table top depicted in Figures 1–8 includes tenons, or holes. It is reasonable that anyone observing two distinct ornamental designs for the same wider portion of the table top would be unclear as to the claimed ornamental design where holes are shown in one figure but tenons are shown in another figure illustrating the same wider portion of the table top. Observing as a whole, the figures illustrating the table top in the proposed substitute claim, the question remains, does the wider portion of the table top include tenons, or holes? See Maatita, 900 F.3d at 1376 (“Ultimately, a patent is indefinite for § 112 purposes whenever its claim, read in light of the visual disclosure (whether it be a single drawing or multiple drawings), ‘fail[s] to inform, with reasonable certainty, those skilled in the art about the scope of the invention.’”) (quoting Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898 (2014)). proposed substitute claim fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” See Nautilus, 572 U.S. at 910. Thus, Petitioner has shown, by a preponderance of the evidence, that the proposed substitute claim is indefinite and we accordingly deny Patent Owner’s Noncontingent Motion to Amend.” slip op. at 29
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteUnpatentable
“Federal Circuit recently explained that “a design patent is indefinite under § 112 if one skilled in the art, viewing the design as would an ordinary observer, would not understand the scope of the design with reasonable certainty based on the claim and visual disclosure.” In re Maatita, 900 F.3d 1369, 1377 (Fed. Cir. 2018). In Maatita, the Federal Circuit reversed the Board’s finding of indefiniteness of a design for a shoe bottom, i.e., a shoe sole, finding that Maatita’s two-dimensional drawing clearly demonstrates the perspective from which the shoe bottom should be viewed. A potential infringer is not left in doubt as to how to determine infringement. In this case, Maatita’s decision not to disclose all possible depth choices would not preclude an ordinary observer from understanding the claimed design, since the design is capable of being understood from the two-dimensional, plan- or planar-view perspective [] shown in the drawing. Id. at F.3d 1378–79. Different from Maatita, the issue in this proceeding is not whether an ordinary observer would sufficiently understand a three-dimensional ornamental design from a two-dimensional figure, but whether inconsistencies between figures of the proposed substitute claim render the scope of the claimed table top uncertain. See Maatita, 900 F.3d at 1376 (The Federal Circuit specifically distinguishing Maatita’s single two-dimensional drawing from indefiniteness issues raised by inconsistent drawings: “[h]ere, we are not dealing with inconsistencies in the drawings, or inconsistencies between the drawings and the verbal description, but” slip op. at 24
§ 103 obviousness§ 112 disclosurecites Nautilus - Askeladden, L.L.C. v. Ohva, Inc.Rehearing grantedPTAB · Mar 15, 2024 · IPR2023-00921 · APJ Amee A Shah · IPR · Rehearing
Granted petitioner’s rehearing request and instituted IPR of claims 1–4 on all asserted grounds, finding a reasonable likelihood of prevailing based on the preliminary construction of “transaction data.”
RulingsRehearing decision- RehearingRehearing, grantedGranted
“institute has the burden of showing the decision should be modified, and the request for rehearing must specifically identify all matters the party believes the Board misapprehended or overlooked and the place where each matter was previously addressed in its papers. 37 C.F.R. § 42.71(d). “When rehearing a decision on petition, a panel will review the decision for an abuse of discretion.” Id. § 42.71(c).” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“Although the ’286 patent distinguishes “account data” from “transaction data” in the embodiment of Figure 11, the “transaction data” is submitted by the user to perform a series of banking transactions after manually entering a PIN code, whereas the “account data” is stored on the server, and the token information is accepted from the smart card’s embedded token, i.e., the output interface of the transaction card. See Ex. 1001, 10:12–18, 10:30–35, 10:40–42, 11:21–22, 11:65–12:4, 12:22–36. Thus, the claimed “transaction data” that is “accepted . . . from an output interface of a transaction card” and “accepted . . . from a transaction card at an input interface of the card reader,” as recited in independent claims 1 and 3, comprises data stored on and read from a card, such as an ID number, password, authentication information, or session information, that can be used to facilitate a transaction. Such claimed “transaction data” is distinct from the “transaction data” described in connection with the Figure 11 embodiment. We therefore do not limit the claimed “transaction data” and instead preliminarily construe that term as encompassing any data involved in a transaction, including account data. As described above, the claimed transaction data must come from the output interface of a transaction card. Should either party believe that a different construction should apply in the instituted trial, it should explain the proposed construction, how the construction is supported by the record, and how the construction affects our unpatentability analysis.” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Entitled to earlier dateInstituted
“The dispute relates to whether the ’030 application describes the claimed “smart telephone” accepting transaction data and executing coded instructions to convert the analog signal to digital data representing transaction data as digital data. See Pet. 14–15, 19–27. In Petitioner’s view, that term is supported only by language added to the “Brief Summary of the Invention” during prosecution of the application resulting in the ’286 patent. Id. at 17. In contrast, argues Petitioner, the corresponding section of the ’030 application instead describes transmitting sound to a PC, not a smart telephone. Id. at 19–26. Patent Owner submits that the ’030 application describes generating sounds from a smart phone and using a “key jack sound pass generator” to communicate sounds. Prelim. Resp. 16. Patent Owner contends that the claim language is supported by disclosure of receiving the audio signal at a microphone port and converting the signal to transaction data. Id. at 16–18. Patent Owner points also to description of direct communication between a “client device” and server. Id. at 19. On the present record, we find that Petitioner, at this stage in the proceeding, has shown sufficiently how it contends that the earliest possible effective filing date for claims 1–4 of the ’286 patent is March, 3, 2015, such that the Cho, Aaron, Carpenter, and de Geer references qualify as prior art. Patent Owner has identified a factual dispute regarding the significance of the ’030 application’s disclosures, and we view that dispute as best resolved through trial.” slip op. at 9
- PTAB / AIA Trials › Real party in interest / privityDecided for petitioner
“35 U.S.C. § 312(a)(2) provides that one of the “Requirements of Petition” is that “the petition identifies all real parties in interest.” “Whether a non-party is a RPI is a ‘highly fact-dependent question’ and must be considered on a case-by-case basis.” SharkNinja Operating LLC. v. IROBOT Corp., No. IPR2020-00735, 2020 WL 6050687, at *4 (PTAB Oct. 13, 2020) (precedential) (citing Ventex Co. v. Columbia Sportswear N. Am., Inc., IPR2017-00651, Paper 148 at 6 (PTAB Jan. 24, 2019) (Paper 148) (precedential) (citing Office Trial Practice Guide, 77 Fed. Reg. 48,756, 48,759 (Aug. 14, 2012))). Here, addressing whether TCH is an unnamed RPI would not create a time bar or estoppel under 35 U.S.C. § 315. There is no allegation or evidence that TCH is “barred or estopped from this proceeding or that Petitioner purposefully omitted [TCH] to gain some advantage.” SharkNinja at *4. Rather, Patent Owner argues that for “once again willfully fail[ing] to identify TCH as a real party in interest, . . . the Petition should be denied on that basis.” Prelim. Resp. 7. In other words, Patent Owner contends only that we deny institution because of “the alleged failure of a procedural requirement that can be corrected under our precedent.” SharkNinja at *4. We understand that” slip op. at 11
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 9,679,286 - Apple Inc. v. Rfcyber Corp.All claims unpatentablePTAB · Jan 19, 2024 · IPR2022-01256 · APJ Kevin W Cherry · IPR · Final written decision
Claims 1–11 are unpatentable as obvious over Buhot, GPC, and Zhu.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“earlier applications, in particular Application No. 11/534,653 (“the ’653 application”), which issued as U.S. Patent No. 8,118,218 B2 (“the ’218 patent”). “‘It is elementary patent law that a patent application is entitled to the benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.’” PowerOasis, Inc. v. T- Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008). The test for determining compliance with the written description requirement under § 112(a) is whether the original disclosure of the earlier-filed application reasonably would have conveyed to one with ordinary skill in the art that the inventor had possession of the claimed subject matter at the time of the earlier-filed application. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). It is well settled that “[e]ntitlement to a filing date does not extend to subject matter which is not disclosed but would be obvious over what is expressly disclosed.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1571−72 (Fed. Cir. 1997). “It is not sufficient for purposes of the written description requirement of § 112 that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Id. We agree with Petitioner there does not appear to be support for limitation [1(j)] in the ’653 application. We find that the disclosure of the ’653 application—limited to general teachings of a smart card, an operating system, and a smart card manager—is insufficient to show possession of limitation [1(j)]. See Ex. 2001 (’218 patent), 4:47–56. As we explained above, “[e]ntitlement to a filing date does not extend to subject matter which is not disclosed but would be obvious over what is expressly disclosed.” Lockwood, 107 F.3d at 1571−72. The ’653 Application contains no disclosure of replacing applications, even if the disclosure might render such replacing obvious, it is not sufficient to show the possession required to establish entitlement to a priority date. Accordingly, we agree with Petitioner that the challenged claims of the ’724 patent are entitled to a priority date no earlier than March 4, 2012.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Relying on the declaration testimony of Mr. Smith, Petitioner contends that an ordinarily skilled artisan for the ’724 patent “would have had at least a bachelor’s degree in computer engineering, computer science, electrical engineering, or a related field, with at least one year of experience in the field of mobile payment technology. Additional pertinent education might substitute for the requisite experience and vice versa.” Pet. 6–7 (citing Ex. 1007 (Smith Decl.) ¶¶ 34–35). Patent Owner states that “[t]he parties agree on the level of skill in the art.” PO Resp. 11. Accordingly, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’724 patent and the asserted prior art, and we apply it in our obviousness evaluations below. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner contends that it applies “the plain and ordinary meaning as understood by a [person of ordinary skill in the art] for all terms not expressly construed below,” and indicates that in parallel District Court litigation, the parties agreed to claim construction for the term “emulator device” to mean “hardware device, alone or containing software, that pretends to be another particular device or program that other components expect to interact with.” Pet. 8. Petitioner proposes that the term “application” should be construed to mean “‘software program suitable for being executed on a portable device,’” but that the “distinction between the parties’ respective proposals need not be resolved for this proceeding.” Id. at 8–9. Petitioner finally contends that the phrase “a portion of or in entirety” in each independent claim means “in its entirety or partially,” but not both. Id. at 9. Patent Owner submits that “[t]he parties agree that the Board should construe ‘emulator device’ as ‘hardware device, alone or containing software, that pretends to be another particular device or program that other components expect to interact with.’” PO Resp. 11. Patent Owner “does not believe that any other terms require construction to resolve the issues presented in this proceeding.” Id. We apply the agreed upon constructions above, but otherwise find that no express constructions are necessary for this decision.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We agree with Petitioner that, even if the applications were stored in “generic memory” as Patent Owner contends, Zhu provides adequate security and would not undermine Petitioner’s motivation to combine. See Intel, 61 F.4th at 1380 (“It’s not necessary to show that a combination is the best option, only that it be a suitable option.”). Indeed, Zhu addresses the problem Patent Owner contends it would cause in the combination.3 As Zhu 3 Patent Owner argues that Petitioner should be precluded from discussing Zhu’s encryption embodiment because it was not raised in the Petition. See Sur-Reply 6–7. We disagree. The claims do not recite anything about how the data should be stored. Thus, it is not surprising that the Petition did not address it. Patent Owner raised the teaching away argument regarding the security of the data. See PO Resp. 12–16. Petitioner relies on the exact same mapping, same motivation, and same arguments why Zhu accounted for certain limitations. See Reply 4–11. Petitioner’s Reply merely explained that Zhu did address the problem Patent Owner contended would “teach away” from the combination. Indeed, Patent Owner was aware of Zhu’s teachings and addressed them in their Patent Owner Response. The Federal recognizes, “[l]oading one of the smart card applications already resident on the smart card to another memory location on the mobile device can provide sufficient memory for the selected smart card application, but can also create a security problem.” Ex. 1006 (Zhu), 3:25–34. To address this problem, Zhu proposes encrypting these applications in generic memory which “reduces the possibility of unauthorized access to the information.” Id. at 3:59–61, 8:30–55, 9:28–33; Ex. 1033 (Smith Supp. Decl.) ¶¶ 5–6. Although acknowledging this disclosure, Patent Owner’s expert, Dr. Weaver, testifies that Zhu’s encryption is inadequate and that encryption would have certain drawbacks. See Ex. 2002 (Weaver Decl.) ¶ 69. We find this testimony, which directly contradicts the teachings of Zhu that encryption is an adequate solution, lacks sufficient support to be entitled to much weight. Dr. Weaver provides no citations to support his contention that a person of ordinary skill at the time of the invention would find encryption so inadequate or problematic as he now contends. Moreover, we find that Dr. Weaver’s testimony on cross examination provides an additional, independent basis to give this testimony little weight. On cross examination, Dr. Weaver contended that there was nothing uniquely inadequate about the particular encryption scheme disclosed in Zhu, but rather that his “opinion was more general, that encryption schemes known in the 2012 time frame were all breakable with computing power and time,” and thus, inadequate Circuit has explained that “the petitioner in an inter partes review proceeding may introduce new evidence after the petition stage if the evidence is a legitimate reply to evidence introduced by the patent owner.” Anacor Pharm., Inc. v. Iancu, 889 F.3d 1372, 1380–81 (Fed. Cir. 2018). That is the case here, so we find that Petitioner’s arguments and evidence regarding Zhu’s encryption are proper. for storing payment applications in a mobile device’s general memory. Ex. 1027 (Weaver Tr.), 26:11–23; see also id. at 23:3–8 (“[D]oes encryption ever provide a sufficiently high security to permit storing payment application on a mobile device’s general memory? A. No”); 24:15–25:23 (testifying all publicly known encryption schemes in 2012 were breakable). However, when confronted with the fact that the ’724 patent discloses storing payment application on general baseband memory using an encryption method that was breakable, id. at 26:24–29:7, Dr. Weaver testified that this encryption method was sufficient to allow storing payment applications in general baseband memory even though it was “not perfectly secure,” id. at 29:8–14. Dr. Weaver provides no explanation or rationale why the encryption method in the ’724 patent, which he admits suffers from the same drawbacks he identified with respect to Zhu, is sufficient, but other encryption methods would not be sufficient. In its Sur-reply, Patent Owner attempts to rehabilitate Dr. Weaver’s testimony with justifications and qualifications not found in his original testimony. Sur-Reply 7–8. Yet, Dr. Weaver’s testimony discussed above was clear and unequivocal. See Ex. 1027 (Weaver Tr.), 24:15–29:14. Patent Owner made no effort to redirect his testimony at his deposition, so it cannot now do so through mere attorney argument. We find the inconsistency between Dr. Weaver’s treatment of Zhu and his treatment of similar disclosure in the ’724 patent exposes the insufficient reasoning supporting his opinions regarding the adequacy of Zhu’s use of encryption in the combination. Accordingly, we give no weight to his testimony that a skilled artisan would not have combined Zhu with a Buhot/GPC system due to security concerns. In contrast, we find the testimony of Mr. Smith regarding the use of encryption and the tradeoffs with the benefits of adopting Zhu’s memory management technique, which he offers in his Supplemental Declaration, to be well-reasoned, consistent with the disclosure of Zhu and the ’724 patent4, and entitled to substantial weight. See Ex. 1033 (Smith Supp. Decl.) ¶¶ 4–15. As Petitioner recognizes, “‘[a] given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.’” Allied Erecting & Dismantling Co. v. Genesis Attachments, LLC, 825 F.3d 1373, 1381 (Fed. Cir. 2016). As Mr. Smith and Dr. Weaver testified, decryption without access to the security keys is an extremely computationally intensive and time-consuming process. Ex. 1033 (Smith Supp. Decl.) ¶¶ 6–8; Ex. 1027 (Weaver Tr.), 23:17–25:2; see also Ex. 10175, 132. Mr. Smith testifies that the benefits of using encryption would be sufficient to resolve the security concerns Patent Owner raises, and that any burden of generating a certificate would be outweighed by the benefits of using encryption and the memory advantages Zhu’s technique would offer. See Ex. 1033 (Smith Supp. Decl.) ¶¶ 4–15. Accordingly, we find that Patent Owner’s security concerns would be” slip op. at 25
Patent outcomesUS 11,018,724 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,018,724 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.
RulingsInstitution decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37
- Other 314aDecided for petitioner
“B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40
§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 11,230,430
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.