PTAB
Advanced fields
23 decisions · 1064msnewest first
  • PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

    The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

      “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

    • BurdenNot shown unpatentable

      “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

    • Obviousness (§103) › Analogous artAnalogous artOther

      “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

    Patent outcomesUS 9,421,713 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,421,713
  • Adobe Inc. v. Jonathan E. JaffeNo claims unpatentable
    PTAB · Mar 4, 2026 · IPR2024-01352 · APJ Bach V Hoang · IPR · Final written decision

    Claims 1–6 were not shown unpatentable under any asserted §103 ground because the references did not teach monitoring the physical coupling between the sensor and memory.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “The Institution Decision adopted and applied Petitioner’s proposed level of ordinary skill because Petitioner’s “definition generally comports with the level of skill necessary to understand and implement the teachings” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

      “The parties present various claim construction arguments, disputing the meaning of three limitations recited in claim 1: “a sensor, which is tightly coupled to said memory”; “monitoring the integrity of the tight coupling between said memory and said sensor”; and “based on.” See Pet. 9–14; PO Resp. 5–12; Pet. Reply 4–9; PO Sur-reply 4–11. For purposes of this Decision, we do not need to discuss the construction of “based on.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As explained below, this Decision turns on whether Glass or Rieger discloses limitation [1c] reciting “monitoring the integrity of the tight coupling between said memory and said sensor.” Ex. 1001, 20:65–66; see infra §§ II.C.2, II.E.1, II.F. That limitation recites an element which overlaps with the earlier-recited limitation “a sensor, which is tightly coupled to said memory.” To reach our decision, we need only provide a limited discussion of two of the parties’ claim construction arguments. Our analysis follows.” slip op. at 13

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “said integrity is compromised, then also providing an indication of said compromised integrity.” Ex. 1001, 20:65–21:2. Although Petitioner points out that the limitation does not expressly recite “‘specifically’ monitoring the tight coupling” (Pet. Reply 8), the structure of the clause suggests that the tight coupling is specifically monitored. At a high level, the limitation is straightforward in its recitation that the integrity being monitored is “of the tight coupling” (Ex. 1001, 20:65–66 (emphasis added)), plainly suggesting that the tight coupling is specifically monitored. More granularly, breaking the relevant clause down to its grammatical parts, the clause recites a gerund (“monitoring”) acting on a direct object (“the integrity”) which is modified by a prepositional phrase (“of the tight coupling”). Notably, the object of the preposition (“of”) is “the tight coupling.” Altogether, this reads that the integrity being monitored is specifically of the tight coupling. Also, the claim recites that “if said integrity is compromised, then also providing an indication of said compromised integrity.” Therefore, from the claim language we know that the “integrity” of the tight coupling is something that may be “compromised,” which is consistent with Patent Owner’s proposed construction of determining whether the physical coupling has been “accessed or disturbed.” Petitioner’s interpretation effectively inserts additional language into the limitation such that the limitation includes monitoring the integrity of a device containing or surrounding the tight coupling, such as a camera (or camera housing), e.g., “monitoring the integrity of a camera that includes the tight coupling.” But, because the plain reading and the structure of the limitation reads that it is specifically the tight coupling’s integrity—not another physical structure, like a camera—which is being monitored, a monitored is not consistent with the language of the claim. See PO Resp. 9 (arguing that “Petitioner’s construction is improper because the claim language explicitly requires monitoring the physical coupling between the memory and the sensor as opposed to some third structure” (emphasis omitted)).” slip op. at 17

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “package 50 does not specifically monitor the integrity of the coupling between Glass’s sensor and the memory and, instead, argues that Glass detects tampering of all “the components and interconnections contained in that packaging,” e.g., control logic 44, cropper 46, compressor 47, MUX 45, code generator 48, and the various interconnections between those components. See Pet. Reply 16; Ex. 1005, 5:13–41. As explained above, we construe “monitoring the integrity of the tight coupling between said memory and said sensor” to mean determining whether the physical 7 Petitioner does not assert that a person of ordinary skill in the art would have been motivated to modify Glass’s device in any way; Petitioner solely argues that Glass teaches limitation [1c], based on Petitioner’s proposed claim construction. See Pet. 30–32 (“Glass discloses this limitation.”); Pet. Reply 16–17 (“Glass and Rieger disclose the ‘monitoring’ step.”). disturbed, which specifically requires monitoring the physical coupling between the sensor and the memory. See supra § II.C.2. As we agree with Patent Owner that this limitation requires monitoring the physical coupling between the sensor and the memory, monitoring Glass’s tamper resistant package 50 does not teach or disclose “monitoring the integrity of the tight coupling between said memory and said sensor.” Accordingly, we determine that Petitioner fails to show that Glass teaches or suggests [1c] monitoring the integrity of the tight coupling between said memory and said sensor when said at least one internal and unique parameter is generated, and, if said integrity is compromised, then also providing an indication of said compromised integrity, as required by claim 1. Consequently, we determine that Petitioner has not shown, by a preponderance of the evidence, that the subject matter of claim 1 would have been obvious over Glass.8” slip op. at 30

    Patent outcomesUS 6,757,828 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 6,757,828
  • PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

    Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

      “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

    • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

      “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

    Patent outcomesUS 10,574,894 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 10,574,894
  • PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

    Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

    RulingsFinal written decision
    • BurdenFwd all claims patentableNot shown unpatentable

      “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

    • Skill levelSkill level petitioner adoptedOther

      “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

    • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

      “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

      “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

    Patent outcomesUS 10,958,840 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,958,840
  • PTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision

    Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18

    Patent outcomesUS 10,958,840 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,958,840
  • PTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision

    Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for petitioner

      “On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

      “Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29

    Patent outcomesUS 9,023,203 not shown unpatentable
    Claim construction§ 103 obviousnesscites Graham
    Patents in suitUS 9,023,203
  • PTAB · Aug 30, 2024 · IPR2023-00529 · APJ Brian D Range · IPR · Final written decision

    Claims 1–8, 11–16, and 21 were not proven unpatentable over Mauer and Waylett because the asserted combinations did not teach key claim limitations.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “II. ANALYSIS A. LEVEL OF ORDINARY SKILL Petitioner defines the person of ordinary skill in the art as follows: As of February 2006, a person of ordinary skill in the art (“POSITA”) would have been a person with a degree in 1 The Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), amended 35 U.S.C. § 103. Because the challenged claims of the ’414 patent have an effective filing date before the effective date of the applicable AIA amendments, we refer to the pre-AIA version of 35 U.S.C. § 103 throughout this Decision. 2 Mauer et al., U.S. Patent No. 7,395,085 B1, issued July 1, 2008 (Ex. 1005, “Mauer”). 3 Waylett et al., U.S. Patent No. 8,184,603 B2, issued May 22, 2012 (Ex. 1006, “Waylett”). computer science, electrical or computer engineering, physics, or a similar discipline . . . [and] would also have at least two years of relevant experience including, for example, work related to telecommunications networks. Pet. 3 (citing Ex. 1003 ¶ 54). The institution decision adopted Petitioner’s definition of a person having ordinary skill in the art. Dec. on Inst. 11–12. Patent Owner applied this definition for its response. Resp. 19. Petitioner’s undisputed definition of a person of ordinary skill in the art is reasonable and consistent with the prior art and ’414 patent specification. Based on the record before us, we adopt Petitioner’s undisputed proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 12

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

      “Petitioner does not submit constructions for any claim terms. According to Petitioner, “[t]he Board construes claims under the same standard used in civil actions in federal district court. The district court for the related litigation has not yet construed the claim terms.” Pet. 7. The parties provided briefing regarding construction of “distributed mobile architecture (DMA).” Resp. 19–34; Pet. Reply 1–3; PO Sur-reply 11–14. But we do not need to construe “distributed mobile architecture (DMA)” to resolve this inter partes review. We thus do not construe this claim term. We also do not discern a need to construe explicitly any other claim language because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We discuss the meaning of ’414 patent claims to the extent necessary to resolve the issues we address below. Id.” slip op. at 14

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

      “a) Combination of Mauer and Waylett In support of both Ground 1 and Ground 2, Petitioner argues that a person of ordinary skill in the art would have been motivated to combine Mauer’s and Waylett’s disclosures, “using Waylett’s Network-in-a-box 224 in each of Mauer’s WWAN 14 and WLAN 12, resulting in at least two DMA systems.” Pet. 11–13. Asserting that “Mauer teaches providing sufficient network coverage by use of different kinds of networks, network interfaces, and protocols,” Petitioner contends that a person of ordinary skill in the art would have recognized that “Waylett discloses an inexpensive way to implement the same networks used in Mauer’s WWAN 14 and WLAN 12.” Id. Citing similarities in Mauer’s and Waylett’s systems, Petitioner argues that “a POSITA would have been able to modify Mauer’s WWAN 14 and WLAN 12 networks so that each network uses Waylett’s NIB 224.” Id. at 14. According to Petitioner, the combination would have included a number of beneficial features from Mauer. Id. at 14–15. Petitioner further advances three reasons that a person of ordinary skill would have had to combine the references’ teaching. Id. at 15–16. First, asserting that Waylett discloses cost benefits and Mauer discloses “an improved method and system for notifying mobile stations,” Petitioner contends the “references each provide reasoning” to combine their disclosures. Id. at 15. Second, Petitioner argues that a person of ordinary skill in the art would have been motivated to “improve Mauer’s distributed wireless network system by consolidating it into a single box, making it compact in design allowing for faster deployment.” Id. at 16. “Third, Waylett’s NIB would help mitigate the shared concern of Mauer—that is, reaching a mobile station as it roams or moves outside of the service or coverage area.” Id.” slip op. at 24

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Petitioner does not establish that Mauer sends calls to voicemail based on the two determinations claim 1 recites. Resp. 55–56. In particular, as we explain above, claim 1 requires making use of the DPR after first determining the second mobile subscriber is not located within a first wireless coverage area based on HLR and VLR information and also determining that the second mobile subscriber is not located within a second wireless coverage area based on certain CLR information. The Petition, at best, attempts to establish that Mauer directs to voicemail when a “communication session cannot be established over the first or second wireless network.” Pet. 37. But a general determination that a “communication session cannot be established” does not teach or suggest claim 1’s specific requirements that first, the DPR is utilized in the specific circumstance that the second mobile subscriber is not located within the first wireless coverage area (with this determination being made based on HLR and VLR information), and second, that the DPR is also not located within the second wireless coverage area (with this determination being made based on CLR information). See PO Sur-Reply 8–9; Ex. 2001 ¶¶ 111–113. For the reasons above, Petitioner does not establish by a preponderance of the evidence that the combined art teaches or suggests the final “when” recitation of claim 1.” slip op. at 29

    Patent outcomesUS 7,653,414 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,653,414
  • PTAB · Apr 4, 2024 · IPR2022-01496 · APJ Mitchell G Weatherly · IPR · Final written decision

    Claims 1–21 were not shown unpatentable under either §103 ground because the cited combinations failed to teach required claim limitations.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “including mobile device applications.” Pet. 8 (quoting Ex. 1003 ¶ 20). Petitioner also contends that “[m]ore education can supplement practical experience and vice versa.” Id. Patent Owner adds that a POSA could also have a bachelor’s degree in computer science, but otherwise agrees with Petitioner’s definition of a POSA. PO Resp. 16 (citing Ex. 2004 ¶¶ 74–78). We apply Petitioner’s proposed level of skill in the art, but, add that the person of ordinary skill in the art could also have a bachelor’s degree in computer science because that is consistent with the problems addressed in the ’187 patent and the prior art. Our Decision, however, would not be affected if we adopted Petitioner’s level of skill in the art. D. Claims 1–21: Obviousness in View of Poole and Hammad” slip op. at 9

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “We credit Dr. Long’s uncontroverted testimony on the topic of “authentication,” which he supports with citations to objective evidence. Ex. 2004 ¶¶ 26–31 (citing Ex. 2020, 594, 595, 626, 627, 632, 633, 636). He describes the three types of user authentication as being based upon what a user “knows,” “has,” or “is.” Ex. 2004 ¶ 28 (citing Ex. 2020, 627). He testifies that authentication based on what a user “knows” involves entering a user name and password or answering security questions. Id. ¶ 29 (citing Ex. 2020, 632–633). He further explains that the second type of authentication based on a user providing something that they “have,” involves the user providing, for example, “a key to a door” or an “ATM card.” Id. ¶ 30 (citing Ex. 2020, 633). Regarding the last way of authentication, Dr. Long testifies that the third method, providing something that the user “is,” such as a user’s biometric characteristic like a fingerprint or image of a face. Id. ¶ 31 (citing Ex. 2020, 636).” slip op. at 23

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “However, none of the cited material within Poole (¶¶ 32, 48, 88, 94) supports Petitioner’s contention. Poole’s ¶ 32 describes sensors 214 having a “sensor identifier” that “may be used by . . . customer device 220 . . . to identify and/or locate sensor 214,” but wholly fails to describe scanning a machine-readable element to decode location information. Ex. 1006 ¶ 32. Poole’s ¶ 48 explains: information contained in signals transmitted by sensors 214 may include a Bluetooth identifier, Bluetooth profile, sensor identifier, and/or sensor position. The sensor identifier of each sensor 214 may be stored in association with a known position of sensor 214 in memory 306, storage medium 308, and/or database 314. Customer device 220 may retrieve a position or sensor identifier of sensor 214 located near customer device 220 based on the stored information. Id. ¶ 48. This paragraph similarly fails to describe that customer device 220 scans a barcode to decode location information, but instead describes device 220 receiving a wireless signal from sensor 214 used to obtain the position of the sensor from a database. Id. Barcodes are not discussed at all in Poole’s ¶ 48. Id.” slip op. at 17

    Patent outcomesUS 10,368,187 not shown unpatentable
    § 103 obviousnesscites Phillips · Graham
    Patents in suitUS 10,368,187
  • PTAB · Apr 3, 2024 · IPR2022-01509 · APJ Arthur M Peslak · IPR · Final written decision

    Claims 1–19 were not shown unpatentable over Poole and Hammad because the combination did not teach the claimed machine-readable element, and Poole did not teach the claimed scanning and decoding.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for petitioner

      “priority date would have had a ‘bachelor’s degree in electrical engineering (or equivalent subject) together with one to two years of experience in research, design, development, and/or testing of location-based systems including mobile device applications,’” also noting that “[m]ore education can supplement practical experience and vice versa.” Pet. 7 (citing Ex. 1003 ¶ 20). Patent Owner adds that a person of ordinary skill in the art “could also have a bachelor’s degree in computer science, but otherwise agrees with Petitioner’s definition.” PO Resp. 15 (citing Ex. 2004 ¶¶ 54–58). We apply Petitioner’s proposed level of skill in the art, but, add that the person of ordinary skill in the art could also have a bachelor’s degree in computer science because that is consistent with the problems addressed in the ’188 patent and the prior art. Our Decision, however, would not be affected if we adopted Petitioner’s level of skill in the art.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Neither party proposes a specific construction for any claim term. Pet. 8–9; PO Resp. 17. Based on our review of the record, we determine it is not necessary to construe expressly any claim term for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Based on the disclosure of Poole and Hammad, we find that Petitioner’s argument that an ordinarily skilled artisan “would have understood that the QR code generated and displayed by Hammad would perform the same function as the barcode taught by Poole” (Pet. 16) is not supported by the evidence of record. Poole does not teach that a user can initiate a purchase transaction by scanning Poole’s barcode. Poole discloses that a bar code on sensor 214 can be scanned to identify the sensor and that a 5 Petitioner states: “[t]o the extent that Poole does not expressly disclose a ‘machine readable element generator . . .’, Hammad does.” Pet. 13. To the extent that this statement can be construed as an argument that Poole alone satisfies limitation 1[d], Petitioner does not direct us to any disclosure that Poole teaches “a machine-readable element generator.” See Pet. 11–13. Petitioner relies on Poole’s disclosure in paragraph 94 of “scanning a bar code.” Id. at 12. Poole’s paragraph 94 does not address how the barcode is generated. Ex. 1006 ¶ 94. Consequently, we determine that Petitioner has not met its burden to show that Poole alone teaches “a machine-readable element generator” as recited in limitation 1[d]. bar code on a merchandise item is scanned to identify the merchandise item as part of the store inventory management process. Ex. 1006 ¶¶ 94, 97. Petitioner, thus, does not persuade us that Hammad’s use of a QR code to initiate a purchase transaction is functionally equivalent to the use of Poole’s barcode.” slip op. at 26

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “Mr. Williams provides testimony that cites to the same evidence as the Petition and similarly concludes that Hammad’s QR code performs the same function as the barcode taught by Poole. Ex. 1003 ¶¶ 103–105. Because we find that Poole and Hammad themselves fail to support this conclusion, his testimony is unsupported and thus entitled to little, if any, weight. Additionally, he testifies that Poole’s mobile application scans the bar code. Id. ¶ 118. His testimony that Poole’s mobile application scans the barcode, like the Petition, relies on paragraphs 32 and 94 of Poole. Although Poole describes its customer device 220 wirelessly receiving “a coordinate position” of sensor 214, Poole does not describe its customer device 220 receiving location information by scanning a barcode. Ex. 1006 ¶ 32. When Poole does describe using a barcode to convey sensor identifiers including location information for the sensor, it does so in the context of its description of inventory management, but not in connection with the customer’s use of customer device 220. Id. ¶¶ 94, 95. Consequently, Mr. Williams’s testimony on this point is entitled to little, if any, weight because it is not supported by paragraphs 32 and 94 of Poole.” slip op. at 27

    Patent outcomesUS 10,368,188 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,368,188
  • Apple Inc. v. Logantree, LPNo claims unpatentable
    PTAB · Aug 30, 2023 · IPR2022-00037 · APJ Patrick R Scanlon · IPR · Final written decision

    Claims 1–5, 8–11, 20, 25, 30–32, 36, 39–42, 45–51, 61–65, 144, and 147 were not shown unpatentable under the asserted obviousness grounds.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “In the Decision on Institution, we adopted Petitioner’s proposed level of ordinary skill in the art, stating it was “consistent with the evidence of record, including the asserted prior art.” Dec. Inst. 8. In proposing a different level of ordinary skill in the art, Patent Owner does not explain why its proposed skill level is more appropriate.12 PO Resp. 16. In addition, the parties’ proposed definitions are materially similar. 12 Petitioner does not address the level of ordinary skill in the art in its Reply. definition, although our conclusions with respect to obviousness would be the same if we were to apply Patent Owner’s definition.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We determine that we need not expressly construe “movement sensor” to resolve the parties’ disputes because doing so would have no effect on the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs, 200 F.3d at 803 (Fed. Cir. 1999)). To the extent the parties raise claim construction issues in addressing the asserted grounds, we address such issues below.” slip op. at 12

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Also, the Petition merely states that “Ono supports instances where the user stops the step-counting mode operation using switch S2 after the processor detects that” the target distance or the target number of steps has been reached and notifies the user by generating an alarm sound. Pet. 53 (emphasis added). In this case, supporting the notion of the user stopping the step-counting mode operation in response to the alarm is not the same as teaching or suggesting the notion to one of ordinary skill in the art. The possibility that a user could stop the step-counting operation in response the alarm is insufficient to render claims 1 and 20 obvious to one of ordinary skill in the art. See In re Facebook, Inc., 743 F. App’x. 998, 1001–02 (Fed Cir. 2018) (deciding that an example in a prior art reference showing that it is possible for image elements to be contiguous is not sufficient to teach a LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”). Petitioner’s reliance on the Hewlett-Packard and Unwired Planet cases (Pet. 56) is unavailing, as the facts in those cases are distinguishable from the facts of the present proceeding. Namely, both of those cases involved prior art references that disclosed operations that satisfied a claimed feature some, but not all, of the time. Hewlett-Packard, 340 F.3d at 1326; Unwired Planet, 841 F.3d at 1002. Here, Ono does not disclose the user stopping the step-counting mode operation in response to the alarm even some of the time. In view of the above, we determine, based on the full record, that the combination of Ono and Hutchings does not disclose limitations [1f] or [20f]. Accordingly, we are not persuaded that Petitioner has met its burden of showing, by a preponderance of the evidence, that independent claims 1 and 20 are unpatentable over the combination of Ono and Hutchings.” slip op. at 28

    • BurdenNot shown unpatentable

      “We have determined incorporated Grounds 1, 2, 3A, 3B, and 4, as well as Ground 5A, deficient for the reasons discussed above. Furthermore, to the extent Petitioner contends that any of these combinations somehow adds something to supplement or strengthen the patentability analysis of the incorporated grounds, we note that neither the Petition nor Dr. Kenny provides sufficient particularity to support such a position. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (“In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” (citing 35 U.S.C. § 312(a)(3)); see 1359, 1369 (Fed. Cir. 2016) (“It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” (quoting 35 U.S.C. § 312(a)(3))). Accordingly, we are not persuaded on the complete record before us that Petitioner has demonstrated, by a preponderance of the evidence, that: (1) claims 48, 50, and 51 are unpatentable over the combination of Ono, Hutchings, Amano, Conlan, Kaufman, and Hickman (Ground 5B); (2) claims 1–5, 8–11, 20, 25, 30, 31, 36, 39–42, 45–47, 49, and 61–65 are unpatentable over the combination of Ono, Hutchings, Amano, and Conlan (Ground 6A); (3) claims 48, 50, and 51 are unpatentable over the combination of Ono, Hutchings, Amano, Conlan, and Hickman (Ground 6B); (4) claims 1, 3–5, 8–11, 20, 25, 30, 36, 39–42, 61–65, 144, and 147 are unpatentable over the combination of Ono, Hutchings, Amano, and Kaufman (Ground 7); (5) claims 1–5, 8, 10, 20, 25, 30, 31, 39, 41, 42, 45–47, 49, 61–65, 144, and 147 are unpatentable over the combination of Ono, Hutchings, Conlan, and Kaufman (Ground 8A); and (6) claims 48, 50, and 51 are unpatentable over the combination of Ono, Hutchings, Conlan, Kaufman, and Hickman (Ground 8B).” slip op. at 36

    Patent outcomesUS 6,059,576 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 6,059,576
Page 1 of 3
← Previous123Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.