• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 3, 2026 · IPR2025-00257 · APJ Lilan Ren · IPR · Final written decision

  Claims 1–15 are unpatentable because Petitioner proved by a preponderance of the evidence that the asserted § 103 grounds render them unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “proceeding, we determine Petitioner has proven by a preponderance of the evidence that each of claims 1–15 of the ’660 patent is unpatentable.” slip op. at 85

  Patent outcomesUS 9,592,660 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,592,660
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · May 13, 2026 · IPR2025-00032 · APJ Mitchell G Weatherly · IPR · Final written decision

  Claims 1–29 are unpatentable as obvious under §103 based on the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Petitioner submits that the ordinarily skilled artisan would have at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 30–32). Patent Owner “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For the purposes of our analysis below, we apply Petitioner’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’338 patent and the prior art.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that “amount of charge” reflects no express limitation on the manner of expressing the “amount” or the “charge.” And the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user may specify an “amount of 3 As recited in independent claims 10, 19, and 28 charge.” For example, the Specification describes that a user may specify an amount of charge by specifying a desired travel distance as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Ex. 1001, 19:49–57 (emphasis added). Therefore, “amount of charge” may also refer to a desired mileage or range. Figure 7 further demonstrates that a user may select “amount of charge” in terms of a “percent” or a “range” as shown in Petitioner’s annotated version of the pertinent portion of that figure as shown below.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree with Patent Owner. First, Patent Owner’s reliance on Wonderland as announcing a rule having broad effect is misplaced. Patent Owner contends that the “Federal Circuit has confirmed that where the primary reference already includes the function of the secondary reference, an allegation to incorporate that function into the primary reference is improper hindsight and no motivation to combine exists.” Id. at 29 (citing Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 988 F.Supp. 2d 479, 498–99 (W.D. Pa. 2013), aff'd, 644 F. App'x 1011 (Fed. Cir. 2016); citing Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed.Cir.2012))). Patent Owner’s citation to Wonderland does not support the proposition for which it is cited, namely that the Federal Circuit has “confirmed” that incorporating a function from a secondary reference into a primary reference is “improper hindsight” that precludes a motivation to combine teachings from the primary and secondary references. In Wonderland, the district court denied an accused infringer’s motion for summary judgment of invalidity, in part, due to its finding that genuine issues of material fact existed for the issue of whether sufficient motivation to combine prior art existed. Wonderland, 988 F. Supp. 2d at 511. The Wonderland decision does not constitute a final ruling on that issue, and the Federal Circuit’s summary affirmance of the final ruling by the district court does not address the issue or reflect how the issue was resolved at trial. Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Second, Petitioner also correctly points out that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2003, 54:8–55:9. Ferro also describes manual options for initiating charging, Ex. 1003¶ 146 (citing Ex. 1004 ¶ 109), and that an ordinarily skilled artisan would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without the user having to leave the vehicle, Ex. 1003 ¶¶ 151, 152. Accordingly, we find that Petitioner has established that an ordinarily skilled artisan would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” MCM Portfolio LLC v. Hewlett-Packard Co., 812 F.3d 1284, 1294 (Fed. Cir. 2015). Patent Owner’s argument fails to account for the level of skill and creativity of an ordinarily skilled artisan, who would have possessed a bachelor’s degree in engineering and could have easily accounted for the differences in scale depicted by Letendre’s and Donnelly’s controls. Ex. 1003 ¶¶ 247–249. Accordingly, we find that Petitioner’s showing on the motivation to combine teachings of Ferro, Donnelly, and Letendre to arrive at limitation 1h is persuasive. slip op. at 30

  Patent outcomesUS 11,563,338 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,563,338
• Google LLC / Lenovo (United States) Inc. v. Ericsson ABAll claims unpatentable
  PTAB · Mar 23, 2026 · IPR2025-00003 · APJ Norman H Beamer · IPR · Final written decision

  Claims 1–8, 10, 12, 14, and 16–20 are unpatentable under § 103; the Board denied Patent Owner’s revised motion to amend.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “[W]ould have had a bachelor’s degree in computer science, computer engineering, electrical engineering, or a related field, and 2–3 years of practical engineering experience relating to information security systems that employ cryptographic keys to encrypt/decrypt digital data. Additional education could substitute for professional experience, or significant experience in the field could substitute for formal education. Ex. 1003 ¶ 41. Patent Owner agrees with Petitioner’s expert regarding the level of ordinary skill in the art. RMTA 19. Patent Owner’s declarant, Dr. Villasenor, notes that “obviousness must be viewed from the perspective of one of ordinary skill in the field of information security using cryptographic keys for encryption and decryption of digital data, and my opinions are rendered on the basis of the definition of the ordinary artisan set forth in the Petition in view of that further clarification.” Ex. 2010 ¶ 19. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’178 patent specification. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11

  • Expert testimonyOther

    “In reply, Patent Owner substantially repeats its arguments against Petitioner’s reliance on Peterka for the claim 1 content encryption key identifiers requirements. Reply RMTA 8–9 (citing Ex. 1005 ¶ 121; Ex. 2010 ¶¶ 89, 93–95); see RMTA 14–15. We are not persuaded by these arguments for the reasons discussed in Section III.D.2.e)(2) above.” slip op. at 65

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Patent Owner argues that there was no motivation to combine Peterka with Suzuki because Petitioner has argued that “Peterka can already identify content keys by using the allegedly unique sequence numbers or time stamps assigned to each message carrying a single content key.” PO Resp. 41–42 (citing Pet. 25). Patent Owner also challenges motivation to combine Suzuki because it “is not directed to a pay-by-time, pay-per-view, or subscription distribution model, in which a content key grants access to content that different clients must individually decide to purchase in discrete units or increments.” Id. at 36–37. Petitioner responds that, because Peterka disclosed alternative embodiments that did not use sequence numbers or time stamps to identify EMM/ECM messages, one of ordinary skill would have been motivated specifically assign identifications to individual keys as taught in Suzuki. Reply 22 (citing Pet. 26). Petitioner also argues that whether Suzuki was directed to unpurchased content was irrelevant, because Suzuki is cited to show multiple key responses were conventional. Id. at 19–20. Patent Owner does not otherwise specifically address the issue of motivation to combine Peterka, Suzuki, and Bocharov. See generally PO Resp. Nonetheless the burden remains on Petitioner to demonstrate unpatentability. See Dynamic Drinkware, 800 F.3d at 1378. We find, based on the record, that Petitioner has proved by a preponderance of the evidence that a person of ordinary skill in the art would have had reason to combine the teachings of Peterka, Suzuki, and Bocharov as proffered by Petitioner with a reasonable expectation of success.” slip op. at 45

  • ScopeMotion to amend, deniedDenied

    “We agree with Petitioner that the substitute claims are broadening. Because the amended wording only requires the key request to be made “in response to detecting” the boundary, rather than “ahead of” the boundary, the request can occur before or after the boundary. This is not a fanciful or unlikely possibility — such delayed requests are specifically contemplated by the ’178 patent: [I]f the packager 104 is unable to obtain a new content encryption key from the WFM 102 prior to the expiration of the current content encryption key, the packager 104 will continue to use the current content encryption key until such time as it is able to obtain a new key from the WFM 102. Ex. 1001, 6:32–37. It should be noted that the fixed period duration for key rotation may be viewed as a "target" period, as the packager 104 may not expire a key on the exact boundary. Ex. 1001, 8:9–11. The key expiration time from the WFM 102 may be viewed as a "suggested" expiration time, as the packager 104 may not be able to expire the key at the exact specified time.” slip op. at 56

  Patent outcomesUS 9,313,178 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,313,178
• Google LLC v. Mindbasehq, LLCAll claims unpatentable
  PTAB · Mar 16, 2026 · IPR2021-01252 · APJ Kara L Szpondowski · IPR · Remand

  On remand, claims 14–19, 33–40, and 43–46 were held unpatentable as obvious; the Federal Circuit’s affirmed findings leave claims 1–13, 20–32, 41, and 42 unpatentable as well.

  RulingsRemand decision

  • RemandOther

    “to both cases vacating and remanding in part and affirming in part our Final Written Decisions. Appeal Dec. With respect to Petitioner’s appeals, the Federal Circuit addressed the “dictionary routine” claims (claims 14–19 and 33–40) and the “normalization” claims (claims 43–46). Appeal Dec. 7–14. For the “dictionary routine” claims, the Federal Circuit vacated and remanded, stating that In sum, as Google contends and we now hold, the “dictionary routine” claims can be practiced by use of an already-created dictionary, and do not also require the automatic creation of a dictionary. The Board needs to consider Google’s evidence and argument by applying this construction of the automatically classifying and storing limitation, and using this understanding to determine whether Conlon may, in fact, render the “dictionary routine” claims obvious (and, relatedly, whether its prior distinctions of Conlon may be immaterial). Appeal Dec. 10–11. For the “normalization” claims, the Federal Circuit also vacated and remanded, stating that our “decision to exclude Google’s rebuttal argument and supplemental declaration is based on a clear factual error,” so on remand we “must include evaluation of the evidence and argument Google provided in reply.” Id. at 13–14. With respect to Patent Owner’s cross-appeals, the Federal Circuit affirmed. Id. at 14–16.” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “The Federal Circuit concluded that Petitioner’s construction of “automatically classifying and storing” (as recited in limitation [14.3]), is correct. Appeal Dec. 8. That is, “the ‘dictionary routine’ claims can be practiced by [the] use of an already-created dictionary, and do not also require the automatic creation of a dictionary.” Id. at 10; see also Reply 7 (the limitation is “directed to the use of a dictionary function to automatically look up words and their syntax”); Appeal Dec. 8 (“nothing about the term . . . would inform a person of ordinary skill in the art that automatic ‘creation’ of a database, in addition to the ‘use’ of an already-created database, is a requirement of the dictionary routine claims”); id. (“the plain and ordinary meaning of the claim language is broad enough to include ‘use’”); id. (agreeing with Petitioner that “the specification describes the ‘dictionary routine’ as the act of looking up words already in the database”); id. at 9 (stating that “[i]t is notable, as well, that the specification nowhere describes automatically creating a dictionary; all instances of creating dictionary entries rely, at least in part, on manual data entry by users”). As directed by the Federal Circuit, we will apply this construction in our analysis.8 Id. 8 Patent Owner argues that the Federal Circuit “cherry-picks” and misinterprets the patents’ specifications, and “ignores the clearly contrary specification language.” PO Remand Br. 4–5, 10; id. at 8 (arguing that that the specification clearly set forth the definition of the claim term, and “the Board must accept term definitions . . . above all external definitions”). We do not consider these arguments on the construction of this limitation, because the Federal Circuit has directed us to proceed under its construction of the limitation. We also agree with Petitioner that the Federal Circuit’s claim construction is “foreclosed from further consideration” under its” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “We agree with Petitioner that claim 43 is obvious over the combination of Conlon, Miller, and Fong. The Federal Circuit stated, “[i]n this context, ‘normalization’ generally refers to de-duplicating and simplifying database entries (for instance, combining entries for ‘car’ and ‘automobile’).” Appeal Dec. 4 (cited at Pet. Response Br. 5). This is consistent with the disclosure in the ’433 patent. E.g., Ex. 1001, 16:55– 17:24 (discussing, for example, “recogniz[ing] that the differently named data elements in different structures are actually the same data element . . . is referred to as normalizing the names of the same data elements,” “recogniz[ing] that the same named data elements in different structures are actually different data elements . . . is referred to as normalizing the names of the different data elements,” and “normalizing multiple single data elements”). This is also consistent with how Fong describes “normalization.” Ex. 1029, 76 (The “Function” of “Normaliz[ing] the collection of entities” is to “[r]emove redundancies and detect errors”); see also Ex. 1057 ¶ 226. Patent Owner’s arguments that Fong’s normalization is “different” from the normalization described in the ’433 patent does not persuasively rebut Petitioner’s arguments. As Petitioner points out, Patent Owner does not provide a construction for “normalization,” despite claiming that the term is “defined” in the ’433 patent. Pet. Remand Resp. Br. 6; PO Remand Br. 13. Moreover, although Patent Owner purports to identify differences between the ’433 patent and Fong, the “normalization” applied is expressly recited in limitations [43.1.1], [43.1.2], and [43.2], and the subsequent actions taken on those normalized databases (i.e., comparing and recording) are recited in limitations [43.3]–[43.5]. That is, the “normalization” required by the claim is reflected in the claim language itself, and is broader than argued by Patent Owner. See In re Baxter Travenol Labs., 952 F.2d 388, 391 (Fed. Cir. 1991) (“It is not the function of this court to examine the claims in greater detail than argued by an appellant, looking for nonobvious distinctions over the prior art”). Patent Owner does not explain how these purported “differences” (e.g., that Fong may require the use of “database keys,” “identifiers,” “entities,” or determining ‘non-key attributes’ from key attributes) impacts the claim language, or Petitioner’s showing. See EWP Corp. v. Reliance Universal Inc., 755 F.2d 898, 907 (Fed. Cir. 1985) (A prior art reference “must be considered for everything it teaches by way of technology and is not limited to the particular invention it is describing and attempting to protect”). For the same reasons, as well as those set forth by Petitioner, we are also not persuaded by Patent Owner’s arguments that each DBMS requires a normalization process that is customized for it. Pet. Remand Resp. Br. 6–7. These arguments by Patent Owner also are not commensurate with the scope of the claim language, which does not recite a DBMS, and generally recites “normalizing” or “normalized” without regard to the DBMS. Id. Dr. Jansen provides an example of a database in unnormalized form that is converted into a normalized form, based on Fong’s four conditions, as applied to the claim language. See Reply 31–35; Ex. 1057 ¶¶ 226–261. Therefore, we are not persuaded by Patent Owner’s arguments that Petitioner has not explained how the example maps onto the limitations. PO Remand Resp. Br. 6–12. Patent Owner’s complaint that Dr. Jansen created the graphic in the example does not undermine Petitioner’s showing. E.g., Trial Practice Guide,14 I.G., (“Experts may testify about the teachings of the prior art and how they relate to the patentability of the challenged claims.”). We find Dr. Jansen’s testimony credible and persuasive in explaining why the combination of Conlon and Fong teaches the claim limitations. After considering the properly presented evidence and arguments of the complete record, we determine that Petitioner has shown, by a preponderance of the evidence, that the combination of Conlon, Miller, and Fong teaches the limitations in claim 43, that one of ordinary skill in the art would have been motivated to combine the teachings of Conlon, Miller, and Fong, and that claim 44 would have been obvious over Conlon, Miller, and Fong. 2. Analysis of Dependent Claims 44–46 Claims 44–46 depend, directly or indirectly, from claim 41. We, likewise, determine whether the combination renders obvious claims 44–46, taking into account the arguments made in Petitioner’s Reply Briefs and Dr. Jansen’s Supplemental Rebuttal Declarations. Petitioner contends that dependent claims 44–46, would have been obvious over Conlon, Miller, and Fong, and provides explanation as to how the prior art teaches each claim limitation. Pet. 84–86; Reply 35–39; Pet. Remand Br. 13–14. Patent Owner does not provide further briefing on dependent claims 44–46. 14 Available at https://www.uspto.gov/patents/ptab/trial-practice-guide#step2. Patent Owner did not specifically challenge Petitioner’s contentions as” slip op. at 31

  • Strike new argumentNew argument disregardedDecided for petitioner

    “Patent Owner’s arguments do not undermine Petitioner’s showing. Patent Owner did not specifically challenge Petitioner’s contentions as to the sufficiency of Conlon’s disclosure for claim 1410 in the Patent Owner Response. In the Sur-replies, Patent Owner argues that the claim requires that at least some relationships are created “automatically,” and “these automatic embodiments . . . are represented in this group of claims.” Sur-reply 9. Along these lines, in the additional briefing Patent Owner argues that Conlon does not teach “automatic,” but merely teaches “semi-automatic.” PO Remand Br. 9–10. The crux of Patent Owner’s argument, however, is that the Federal Circuit did not properly construe the limitation, and ignored certain disclosures in the ’433 (and ’680) patent. Id. at 10–11; see Pet. Remand Resp. Br. 1–4; PO Remand Resp. Br. 4–5. The Federal Circuit held that “the dictionary routine claims can be satisfied by mere use of a lexical database, and do not also require the automatic creation of additional definitions.” Appeal Dec. 10. Moreover, the statements from Conlon that Patent Owner relies upon relate to creating a database, not using the database. See id. As discussed above, on remand we are directed to apply the Federal Circuit’s construction. Patent Owner does not explain 10 As discussed in the original Final Written Decisions, Patent Owner raised several arguments that generally applied to all the claims, challenging, for example, the level of ordinary skill in the art, whether Conlon, Miller, and Beckwith were analogous art, and several general arguments relating to Conlon and the motivation to combine Conlon with a DBMS. See Final Dec. 14–23, 25–27. We were not persuaded by Patent Owner’s arguments; the Federal Circuit affirmed, determining that our findings were supported by substantial evidence. Appeal Dec. 14–16. why Petitioner’s contentions are not persuasive in light of the Federal Circuit’s construction of this limitation. In addition, Patent Owner argues in the Sur-replies that “[c]laims 14– 19 are not disclosed by the proffered prior art” and cites to paragraphs 78–83 of the Ranka Rebuttal Declarations. Sur-reply 10. As discussed in the original Final Written Decisions, Patent Owner’s reliance on six paragraphs of Dr. Ranka’s Rebuttal Declarations is an improper incorporation by reference, as Patent Owner did not discuss that testimony or further elaborate on these arguments in the Sur-replies. 37 C.F.R. § 42.6(a)(3); Cisco Systems, Inc. v. C-Cation Techs., LLC, IPR2014-00454, Paper 12 at 9–10 (PTAB Aug. 29, 2014) (informative); see, e.g., Final Dec. 37–39, 45, 48–50, 52. Therefore, we will not consider arguments that are not made in the Sur-replies, but are instead improperly incorporated by reference to the cited paragraphs in Dr. Ranka’s Rebuttal Declarations. Accordingly, after considering the evidence and arguments of the complete record, we determine that Petitioner has shown, by a preponderance of the evidence, that Conlon teaches limitation [14.3], and that claim 14 would have been obvious over Conlon.” slip op. at 21

  Patent outcomesUS 6,665,680 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 6,665,680

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.