• Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentable
  PTAB · Jul 21, 2026 · IPR2025-00342 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1, 2, and 6–11 were not shown unpatentable because the cited combinations did not teach guiding a vehicle to a fixed destination or calculating the claimed optimized path from stored destination data.

  RulingsFinal written decision

  • Adverse judgmentOther

    “reserves consideration of discretionary issues to the Director. The relief Patent Owner requests is that the panel exercise discretion to terminate these proceedings based on actions taken in related district court proceedings as done in Hulu. Supp. PO Resp. 2. Because the basis for Patent Owner’s requested relief is discretionary, the panel lacks the authority to grant the request. In this regard, the present situation is different from that in Hulu and Sinclair Pharma Limited v. Hydrafacial LLC (IPR2025-00145, Paper 41, Squires, Feb. 12, 2026), cited by Patent Owner. In those cases, the 9 Available at: https://www.uspto.gov/sites/default/files/documents/Director_Institution_of _AIA_Trial_Proceedings.pdf (“Director Institution Memo”). Director ordered de-institution, not the panel. The Director has not made such a determination or delegated such authority to the panel in these proceedings. Indeed, as noted above, Patent Owner has already briefed, and the Director has previously ruled on, discretionary denial issues. Paper 10. Accordingly, we decline to vacate our Institution Decision and focus our analysis on the merits of the case as presented by the parties.” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We consider the asserted grounds of unpatentability in view of the understanding of a person of ordinary skill in the art. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “[O]ne or more factors may predominate.” Id. Petitioner asserts that ordinarily skilled artisans “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related subject, and four years of work experience in image processing, automated vehicle control/navigation, or a related field.” Pet. 7. Petitioner’s proposed definition, which Patent Owner does not dispute, appears reasonable and consistent with the asserted prior art and the ’805 patent, and we adopt it here. See generally, PO Resp. Based on this record, and because there is no dispute, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’805 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed patent owner constructionDecided for patent owner

    “Here, in our opinion, Patent Owner has shown that the Specification describes the potential destinations of a vehicle as limited to physically fixed, non-transient objects or features. PO Resp. 18–21. As an initial matter the ’805 patent is titled “Docking Assistant” and explains its purpose for guiding a “vehicle to a stop at a specific location.” Ex. 1001, codes (53), (57), Abstract. We acknowledge that claim 1 does not expressly recite that “at least one potential destination” is a fixed destination or location. See id. at 7:61– 63 (Claim 1 requiring “extracting from the acquired image data positional parameters of at least one potential destination relative to the motor vehicle;”). Yet, in the context of the relatively brief specification, there is no explanation, example, or embodiment which reasonably extends the meaning of “destination” or “potential destination” beyond a fixed location. The ’805 patent describes in the Abstract that [m]any day-to-day driving situations require that an operator of a motor vehicle guide the motor vehicle along a specific course and bring the vehicle to a stop at a specific location, for example in a parking bay or at a loading platform. Id. at code (57) Abstract. The Abstract explains in the next sentence that “[t]o assist a vehicle operator in such situations, a method and a suitable device for implementing this method, include detecting the potential target objects in the image data of an image sensor and identifying the potential target objects as potential destinations in a multi-stage exclusionary method.” Id. (emphasis added). Nowhere in this initial description of the invention, nor anywhere else that Petitioner points to, is there is expansion of the “specific location” or “potential destination” beyond a docking station or parking bay. Of course, the claim is not limited to these examples, as it would be inappropriate to read in such limitations from the Specification. See Acceleration Bay, LLC v. Activision Blizzard Inc., 908 F.3d 765, 771 (Fed. Cir. 2018) (“Acceleration again attempts to import structural limitations into claims lacking those limitations. . . . While the specifications discuss a broadcast channel overlaying a network, the claims at issue are not so limited.”).” slip op. at 14

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Patent Owner’s declarant, Dr. Majumder, testifies to the contrary that “[r]ead as an engineer, the ‘805 patent’s present invention is framed around guiding a vehicle to fixed, physical destinations (exemplified by docking stations and similar structures) without fiducials or special markings.” Ex. 2010 ¶ 81. Considering Broggi, Dr. Majumder testifies further that “[a] moving object, such as a preceding car, is not a valid destination under the ‘805 Patent, because it is not a stationary location at which the host vehicle can be guided to stop. To treat such a vehicle as a ‘potential destination’ would lead to collision, not guidance.” Id. ¶ 86. As discussed in our claim construction, given a plain reading of claim 1 in light of the Specification, our understanding of the ’805 patent is consistent with Dr. Majumder’s testimony. We agree that Broggi is directed expressly to the platooning of moving vehicles, and not physically fixed destinations as the proper claim construction requires. Because Broggi does not disclose the use of physically fixed “potential destinations” as required, e.g., in limitations [1.2]–[1.3], and neither Huttenlocher nor Brady are relied upon to overcome this deficiency, Petitioner has not met its burden of persuasion to show by a preponderance of the evidence that claim 1 would have been obvious over Broggi in view of Huttenlocher and Brady.” slip op. at 27

  Patent outcomesUS 7,336,805 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Markman · KSR · Graham
  Patents in suitUS 7,336,805
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jul 20, 2026 · IPR2025-00228 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1, 2, 4, 5, and 9–18 as obvious over Kim; claims 1–18 over Kim and Fang; claims 1–15 over Han and Fang; and claims 17–18 over Han, Fang, and Chen.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 26 (citing Ex. 1003 ¶42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does not dispute this assessment. PO Resp. 7–8. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’276 patent and the prior art of record.” slip op. at 6

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Dr. Campbell has a Ph.D. in physics, supplying the advanced degree that Petitioner’s definition of a person having ordinary skill in the art accepts as a replacement for some experience. Ex. 2006 ¶ 2. Dr. Campbell has significant experience in semiconductor technology, including in process technologies for submicron CMOS, years of research in semiconductor processing, materials, and device structures, and authored “[t]he leading textbook on semiconductor technology.” Id. ¶¶ 2–4. Dr. Campbell qualifies as a person of ordinary skill in the art under the parties’ agreed definition.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner proposed that the terms “exposing portions” and “etching the exposed portions” require two different steps performed in that order. PO Resp. 7–10. Petitioner does not contest this characterization. Pet. Reply 1– 2. Patent Owner also proposes that this requires the exposure step not to perform any etching of the newly exposed layer. PO Resp. 10–12 (citing Ex. 1001, 10:2–5, 10:15–17 (stating that the etch-stop layer “protects the underlying structure until all the VIA openings 640 are formed” and that it “[t]he essence of an etch-stop layer dictates that contact-hole etching stops or slows down upon contact, i.e., exposing without penetrating it.” Pet. Reply 11. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “described in earlier embodiments would not be consistent with Kim’s statement that previously described elements are “omitted” in the Figures 17A to 22B section “for concise description.” As admitted by Patent Owner, it would be a “reasonable inference” that materials described in a first embodiment for a particular hypothetical layer L would also be used for that layer L in later embodiments absent an express statement to the contrary “because you have just omitted that sort of duplicative description.” Tr. 37:9–38:12. Kim’s Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4–15 embodiments. Thus, it would similarly be a “reasonable inference” that aspects of the stack structure would be understood to apply to the same stack in the embodiments of Figures 17A–22B, which rely upon, in unaltered form, the earlier-described elements of the stack. stack on bottom, they “replace” and “exclude” any prior description of a gate-stack-on-top. PO Resp. 18–19 (citing Ex. 2019 ¶¶ 40–41; Ex. 1005 ¶¶ 185–187 (describing the etch-stop layer as covering the sacrificial layers only at their end portions)). However, as admitted by Patent Owner, all of Kim’s Figures show only a gate-stack-on-bottom structure. Tr. 41:6–7 (“For the first embodiment, it is true that figures show the gate stack on bottom.”). The fact that Kim’s Figures 17A–22B, which add etch-stop and barrier layers to the gate stack, are shown only as gate stack on bottom is merely consistent with the uniform use of gate-stack-on-bottom in Kim’s Figures, which show the layer-by-layer construction of its device. Like Figures 4–15, Figures 17A–22B exemplify rather than limit the description of the previously described memory stack, and do not exclude the gate-stack-onbottom description of the memory stack. Kim can be used for all it realistically teaches, including descriptions in its disclosure that are not represented by specific Figures. See In re Chapman, 357 F.2d 418, 424 (C.C.P.A. 1966) (stating that a reference “is not limited to the disclosures in its specific illustrative examples.”). Accordingly, the record supports Petitioner’s assertion that Kim’s teaching of a gate-stack-on-top alternative for the memory stack would be understood by a POSITA as a memory stack option applicable to its other embodiments having that same memory stack.” slip op. at 11

  Patent outcomesUS 11,101,276 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,101,276
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00152 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–17 are unpatentable as obvious: claims 1–4, 6–9, and 11–14 over Sutardja, Donnelly, and Letendre; claims 5, 10, and 15 with Seelig; claims 16 and 17 with Knockeart.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, 1 US 2008/0136371 A1, pub. Jun. 12, 2008 (Ex. 1011, “Sutardja”). 2 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 3 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 4 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 5 US 6,622,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2–3 (citing Ex. 1003 ¶ 29). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill in the art.” PO Resp. 9. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’788 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “shown in Figure 7 of the ’788 patent. Pet. 4–5. Charge Fusion responds that Tesla’s proposed construction should be rejected because it “wrongly import[s] embodiments from the specification.” PO Resp. 14–16. We discern no dispute over the meaning of “unitary vehicle charge indicator” because, contrary to what Charge Fusion argues, Tesla does not contend that this limitation is “required to be limited to” the bar graph embodiment of Figure 7, only that it “at least includes” that embodiment. Compare Pet. 5, with PO Resp. 14–16. Tesla also argues that the “first” and “second” portions of the unitary vehicle charge indicator—which indicate the charged and uncharged capacities of the battery—recite merely “communicative content,” and thus, are “not entitled to any patentable weight” because they are directed to nonfunctional printed matter. Pet. 5–7 (citing various case law). At the same time, however, Tesla maintains that “[r]egardless, Donnelly teaches a bar graph indicating the amount of charge and uncharged capacity.” Pet. Reply 11–12 (citing Pet. 33–34); see also Hrg. Tr. 74:22–25, 75:9–11. For reasons expressed below, we agree that Tesla persuasively demonstrates that the asserted combination teaches the “unitary vehicle charge indicator element” as claimed and construed by Charge Fusion. Accordingly, we need not decide the printed matter issue.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:63–15:18 (emphases added). In particular, the Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:8–18. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:59–67 (emphasis added).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “full charge” for the battery, and thus, Tesla fails to explain how the combination of Sutardja with Donnelly’s battery bar graph image “would allow a user to select a specific amount of charge or how this would result in a unitary vehicle charge indicator,” as claimed. PO Resp. 30. According to Charge Fusion, “[l]imiting the single option of ‘full charge’ as described in Sutardja would defeat the purpose of implementing a slider” as taught by Donnelly. Id. (citing Ex. 2008 ¶ 72). We disagree. Charge Fusion’s argument rests on the mistaken premise that Sutardja only contemplates selecting a full amount of charge for the battery and not an amount below a full charge, i.e., a partial charge. But that is not what Sutardja says. More accurately, Sutardja teaches that the user specifies the amount of charge—"The user interface module 108 may comprise a key pad, a display, a microphone, and/or a speaker (all not shown). A user of the vehicle 102-1 may use the user interface module 108 to set charging parameters for charging the battery 14.” Ex. 1011 ¶ 243. Elsewhere, Sutardja teaches that the user may set a “predetermined level” of charge— The charge monitoring module 150 may inform the control module 112 when the battery 14 is charged to a predetermined level (e.g., full charge) that may be indicated in the charging parameters. Subsequently, the charge monitoring module 150 may stop charging the battery 14 by deactivating the converter 156 and the charging module 152. The power meter 24 may measure the amount of power received from the utility company 23 during the charging operation. Id. ¶ 270 (emphases added). Although that passage indicates that a “full charge” is an example of a “predetermined level” of charge, nowhere does it exclude the selection of a lesser amount. Indeed, the passage contemplates the ability to “stop charging the battery,” which indicates that selection of the predetermined level may be less than a full charge. Id. Thus, we are not persuaded by Charge Fusion’s argument to the contrary. Rather, in our view, Tesla demonstrates by a preponderance of the evidence that the Sutardja-Donnelly combination teaches a “unitary vehicle charge indicator” that includes at least “first” and “second” portions and that one of ordinary skill in the art would have had reason to successfully combine their respective teachings in a manner that allows a user to predetermine, i.e., specify, an amount of charge. slip op. at 17

  Patent outcomesUS 11,990,788 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,990,788
• Klipsta Pty Ltd v. Lindsay AlbaneseSome claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00346 · APJ Annette R Reimers · IPR · Final written decision

  Claim 16 is unpatentable as obvious over the asserted grounds; claims 1–15, 17, and 18 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) “would be a regular consumer/shopper with a rudimentary knowledge of the use of magnetic clips and a basic understanding of clip construction.” Pet. 13. We find that the ’047 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’047 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • BurdenMixed

    “Petitioner’s mapping of the components of KR ’458’s fastening device is insufficient. Although Petitioner maps the center line of fastening member 115 to the recited second end, Petitioner fails to adequately map the recited first end of the second strap or explain why one of skill in the art would consider the second ferromagnetic member (convex member 117) to be disposed at the first end of the second strap as required by claim 1. that the first end is “upward to connector 117.” Pet. 24. This is not the end of the second strap. As discussed above, the end of the second strap wraps around rectangular ring 210 and is then secured to itself.7 Connector 117 is positioned below the true end of the strap, more in the middle of this segment of the strap. In other words, Petitioner arbitrarily defines the strap as only the portion of hat holder 110 between the center line and connector 117, in contradiction to what KR ’458 actually discloses. Nowhere does Petitioner explain why connector 117 is disposed at the first end of the second strap. Neither does Petitioner explain why we should disregard the true end of the strap, nor why one of skill in the art would consider only a middle portion of the strap to be the second strap. Thus, Petitioner has not satisfied its burden in this regard. Therefore, Petitioner has not shown that KR ’458 discloses “a second strap having a first end and a second end, the second strap joined to the first strap,” with “a second ferromagnetic member disposed at the first end of the second strap.” For the foregoing reasons, we determine that a preponderance of the evidence does not support that claim 1 is anticipated by KR ’458.” slip op. at 23

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “The ’047 patent discloses that in addition to being separate straps, the rear strap and the front strap “can be formed from a single piece of material.” Ex. 1001, 3:40–44, 5:24–32, 10:18–25. In particular, Figures 5A–5B of the ’047 patent illustrate rear strap 510 and front strap 520 as being “formed from a single piece of material that is folded approximately in half where a first half can be the rear strap 510 and a second half can be the front strap 520.” Id. at 10:18–21, Figs. 5A–5B. Indeed, Patent Owner acknowledges “[i]t should be noted that forming the first and second straps from a single piece of material is well within the scope of the claimed invention.” Ex. 1007, 5 (citing the ’047 patent at 3:37–44). Moreover, we note the positions taken by the parties are consistent with the fact that claim second strap are formed from a single folded strap.” Ex. 1001, 14:47–48. We, therefore, adopt Petitioner’s construction of “the second strap joined to the first strap” to include “a single piece of material.”” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

    “Petitioner’s construction of a “hook” to include a “structure that serves to attach the hat holder to another object” is based on function, rather embodiments in the Specification of the ’047 patent. Although strap-style hook 340 of Figures 3A–3C is a flexible component rather than a more rigid component like hook 140 shown in Figures 1A–1C , both can be considered types of hooks. All of the embodiments, whether rigid or flexible, can be considered to have a hook-like structure when serving the function of attaching the hat holder to another object. Petitioner’s proposed construction would render the term “hook” meaningless, as various types of structures could be used to attach the hat holder to another object, that would not reasonably be considered to be a “hook.” For example, a snap, safety pin, ring, or button could be used to attach a hat holder to another object. Petitioner’s identification of different embodiments in the ’047 patent of hook-like structures does not show why one of skill in the art would consider almost any structure to be considered a “hook.” We, therefore, reject Petitioner’s construction of a “hook” as a “structure that serves to attach the hat holder to another object.” “wherein the first strap and the second strap are configured to retain a” slip op. at 12

  Patent outcomesUS 10,413,047 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,413,047
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision

  The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable

    “We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34

  Patent outcomesUS 11,188,124 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,188,124
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18

  Patent outcomesUS 8,460,385 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,460,385
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Tesla, Inc. v. Intellectual Ventures II LLCAll claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00221 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1–8 are unpatentable as obvious: claims 1, 2, 5, and 6 over Dateki; claims 3 and 7 over Dateki and Mate; and claims 4 and 8 over Dateki and Chitrapu.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “[w]ould have been someone knowledgeable and familiar with the wireless communications systems that are pertinent to the ’889 patent. That person would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems. Pet. 18–19 (citing Ex. 1003 ¶ 25). Patent Owner does not dispute Petitioner’s contention as to the level of ordinary skill in the art. See generally, PO Resp. Based on this record, and because there is no dispute, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’889 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “do not recite, as Patent Owner interprets it, that the extracted power control information upon which the UE bases its transmission of a signal be “the same” power control information extracted from the control message. PO Resp. 25. Where the claim is clear on its face, we decline to inject “the same” into the construction, that is, words that are not actually in the claim. Yet considering the plain language of claim 1, we mostly agree with Patent Owner’s interpretation, namely that “a transmission power level based on the extracted power control information,” as required in limitation [1.6] includes power control information extracted from “the control message,” in limitation [1.5] having “power control bits for a plurality of UEs” as recited in limitation [1.4]. Ex. 1001, 10:2–19. We understand and interpret the concluding limitation in method-type claim 5 in the same manner as limitation [1.6].” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “do not recite, as Patent Owner interprets it, that the extracted power control information upon which the UE bases its transmission of a signal be “the same” power control information extracted from the control message. PO Resp. 25. Where the claim is clear on its face, we decline to inject “the same” into the construction, that is, words that are not actually in the claim. Yet considering the plain language of claim 1, we mostly agree with Patent Owner’s interpretation, namely that “a transmission power level based on the extracted power control information,” as required in limitation [1.6] includes power control information extracted from “the control message,” in limitation [1.5] having “power control bits for a plurality of UEs” as recited in limitation [1.4]. Ex. 1001, 10:2–19. We understand and interpret the concluding limitation in method-type claim 5 in the same manner as limitation [1.6].” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “where packet transmission is conducted, “the transmission power control information is transmitted via the HS-SCCH as second transmission power control information TPCC at a shorter periodic cycle.” PO Resp. 11 (quoting Ex. 1005, 13:11–13). But in context, after describing transmission of TPCC 1 on F-DPCH, Dateki says “[a]lso, in a case where packet transmission is conducted, the transmission power control information is transmitted via the HS-SCCH as second transmission power control information TPCC at a shorter periodic cycle.” Ex. 1005, 13:8–13 (emphasis added). We find it significant that the word “also” is used by Dateki, here, to describe the relationship of TPCC 1 and TPCC 2 as used together. If the intent was to transmit and use only TPCC 2 on HS-SCCH when data packets are transmitted on HS-PDCH, it would have made more sense to say “alternatively,” and otherwise make clear that only TPCC 2 is transmitted. But they did not. On the other hand, the inventors certainly understood how to explain when TPCC 2 is not transmitted. For example, Dateki makes clear that in certain embodiments TPCC 2 is unnecessary and “transmission power control may be effectively realized without including transmission power control information in the HS-SCCH.” Id. at 14:33–35. The same cannot be said for TPCC 1.” slip op. at 30

  Patent outcomesUS 11,664,889 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,664,889

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.