• Axon Enterprise, Inc. / Dedrone Holdings, Inc. v. Airspace Defense, Inc.Other
  PTAB · Oct 6, 2026 · IPR2025-00530 · APJ Scott C Moore · IPR · Final written decision

  Original claims 1–9 were canceled; the non-contingent motion to add substitute claims 10–18 was denied for lack of written-description support, and claim 18 was also indefinite.

  RulingsFinal written decision

  • 112 supportMotion to amend, deniedDenied

    “that either the ’303 application or the ’838 provisional contain adequate written description support for the disputed feature of limitation [10.d]. Though the disclosures cited by Patent Owner indicate that a secondary identifier can be used to aid in verification of a UAV, these disclosures also make clear that both first and second identifiers are transmitted by and received from the UAV. See, e.g., Ex. 2002, 4:15–17, 30:24–31:6; Ex. 2003 ¶¶ 14, 66. Patent Owner’s reliance on disclosure characterized as transmitting an identifier from a remote computing system “through the UAV” (Reply 2) is not persuasive. The cited disclosures from the ’303 application and ’838 provisional generally disclose that the identifiers transmitted by a UAV can be “generated remotely,” such as by a “remote computing system.” Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45. But Patent Owner has not identified disclosure indicating that a remote computing system may transmit an identifier to the identification receiver. In the ’303 application and ’838 provisional, only the UAV (which is part of the discrimination system, and thus not “remote”) actually transmits identifiers to the identification receiver. Patent Owner is correct in its assertion that an “aerial system identifier can be generated on-board the aerial system” or “generated remotely . . . at a remote computing system.” Mot. 7 (citing Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45). But even if a UAV’s identifier was at some time in the past generated by a remote computing system, the subsequent transmission of that identifier from the UAV to the identification receiver would not satisfy the plain language of limitation [10.d]. The claim language “receive … a second identifier from a computing system that is remote to the discrimination system” requires the receipt of a transmission of the second identifier from a remote computing system. This claim language limits the source of the received transmission (i.e., where the particular transmission is “receive[d] … from”). Thus, the relevant issue is from where was the recited second identifier received. The relevant is not where the second identifier was originally generated.” slip op. at 12

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “We determine that the disputed language in limitation [10.d] is not indefinite. There is no recitation in proposed substitute claim 10 that the second identifier is transmitted solely from the identifier transmission system. Thus, the alleged irreconcilable contradiction cited by Petitioner is not recited in the claims. Petitioner’s position appears to rest on the fact that the ’303 application and ’838 provisional do not disclose receiving the second identifier from a remote computing system. See Sur-reply 6 (“To manufacture written description support, [Patent Owner] argues the claim encompasses identifiers routed ‘through the UAV.’”). Though we agree that limitation [10.d] lacks adequate written description support, this defect does not render the claim indefinite because the scope of limitation [10.d] is otherwise reasonably certain based on its plain language. See supra § III.C.4.” slip op. at 18

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date, deniedDecided for patent owner

    “In contrast, the ’393 provisional never discloses that the described drone defense system may use the identity of a detected drone to develop a particular countermeasure. The disclosed RTSS certainly uses identity information to determine whether a drone is a threat. And if a threat is identified, the RTSS immediately starts “a series of processes … to determine what rule of engagement will be applied on the intruding drone.” Ex. 1006 ¶ 10. The ’393 provisional discloses that the system may select a particular countermeasure based on (i) the particular zone within a protected area within which a drone is located, (ii) “the behavior of the hostile drone,” or (iii) “other instructions.” Id. ¶¶ 9, 10. But the ’393 provisional never discloses that these “other instructions” may include the identity of the drone. The system disclosed in the ’393 provisional uses the identity of a drone to determine whether to activate the countermeasure system. See id. ¶¶ 16–18. But there is no disclosure in the ’393 provisional that the countermeasure system, once activated, uses the identity of the drone to develop the particular countermeasure to be employed. See generally Ex. 1006. Thus, though the Whitmarsh reference itself contains ample written description support for limitation [19e], the earlier-filed ’393 provisional does not. On this record, and having reviewed the ’393 provisional in its entirety, we determine that the ’393 provisional does not “reasonably convey[] to those skilled in the art that the inventor had possession of” the subject matter of limitation [19e] of Whitmarsh’s claim 19 “as of the filing date” of the ’393 provisional. See Ariad, 598 F.3d at 1351.” slip op. at 27

  § 102 anticipation§ 112 disclosurecites Nautilus
  Patents in suitUS 10,249,199
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13

  • Expert testimonyPatent owner expert discountedMixed

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32

  Patent outcomesUS 10,583,449 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 10,583,449
• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Charles River Laboratories, Inc. v. Seikagaku CorporationAll claims unpatentable
  PTAB · Sep 8, 2026 · IPR2025-00440 · APJ Tawen Chang · IPR · Final written decision

  Claim 21 is unpatentable as obvious over Mizumura with either the ’498 PCT or McClymont; the Revised Contingent Motion to Amend proposing claim 22 is denied.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “overlap to a significant degree, i.e., a person with a Ph.D. in a discipline related to biological sciences and having had at least two years of work experience. However, the parties’ proposals differ slightly in the specific subjects in which a POSA would have had a doctoral degree, and whether the person’s work experience must have been directly related to horseshoe crab Factor C. As an initial matter, we find that a rigid requirement as to the subject of a POSA’s doctoral degree (e.g., biochemical engineering, enzymology), or experience working specifically with horseshoe crab proteins, is not consistent with the evidence of record. See, e.g., Ex. 1067, 20:23–21:2 (Dr. Schaefer testifying that the fact the “name of [his] Ph.D. is immunology . . . does not change the fact that the core of [his] thesis training was really in molecular biology”), 22:3–15 (explaining “the fact that the production of proteins recombinantly is mostly species agnostic”); Ex. 1069, 45:20–47:17 (Dr. Morris testifying that whether a person is a POSA depends on the person’s “experience, [ ] publications,” and work done for the Ph.D. rather than the name of the Ph.D. program). We also find that evidence of record supports Petitioner’s assertion that, for purposes of defining a POSA, “[m]ore education could substitute for experience, and vice versa.” See, e.g., Pet. 19; Ex. 1065, 99:14–100:3. with respect to the claims of the ’318 patent would have had a Ph.D. in molecular biology, biochemistry, or a related discipline, and about two years of experience with cloning genes, expressing cloned genes as proteins, and/or characterizing such cloned genes and proteins, with more education being able to substitute for experience, and vice versa. A POSA may also have collaborated with others, including those with specific experience in utilizing or assessing horseshoe crab Factor C for endotoxin detection and quantitation.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction The parties agree that “the terms in claim 21 can be afforded their plain and ordinary meaning for purposes of this proceeding” without further construction. Pet. 19–20; PO Resp. 11. Because express claim construction is not needed to resolve the issues in this case, we need not, and do not, construe expressly any claim term for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

    “Carrying Out the Invention section, that “[t]he Factor C of the present invention is a Factor C derived from a horseshoe crab,” and states later in the same section that “[e]xamples of the horseshoe crab include . . . Limulus polyphemus.” Ex. 1006, 40. However, none of the remaining portions of ’767 application cited by Patent Owner relate directly to L. polyphemus; instead, the remaining portions of ’767 application cited by Patent Owner are directed to other species, in particular the Japanese horseshoe crab T. tridentatus. Further, Patent Owner’s witness, Dr. Schaefer, conceded that the ’767 application does not contain Factor C sequence information for L. polyphemus. See, e.g., Ex. 1067, 44:25–45:23. Although “[n]o length requirement exists for a disclosure to adequately describe an invention,” Falko-Gunter, 448 F.3d at 1365–1366, we are persuaded that a POSA would not, based on the totality of the above disclosures, reasonably understand that the inventors were in possession of the claimed HEK-293 recombinant L. polyphemus Factor C protein, in view of the state of the art as of December 10, 2013. In this regard, we note that adequate written description of a biological molecule, such as a HEK293 recombinant L. polyphemus Factor C protein, requires “more than a mere statement that it is part of the invention and reference to a potential method for isolating it”; instead, what is required is “‘a precise definition, such as by structure, formula, chemical name, or physical properties,’ not a mere wish or plan for obtaining the claimed chemical invention.” The Regents of the” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1364 (Fed. Cir. 2007). Neither do we see Petitioner’s arguments regarding the December 10, 2013 priority date to be “mutually opposed” as Dr. Schaefer testified. Ex. 1067, 216:4– 24. Instead, we credit evidence of record, including Dr. Jain’s testimony and the February 22, 2018 Mizumura Declaration, that existence of the full sequence would permit a more complete analysis and that such an analysis would provide a POSA with a reasonable expectation that the claimed L. polyphemus recombinant protein would have a residual activity within the claimed range. See, e.g., Ex. 1029, 2–5; Ex. 1010, 48; Ex. 1065, 117:14– 130:24 (explaining that comparison of partial sequences in the Tokunaga 1991 publication showed “difference around the cleavage site” between T. tridentatus and L. polyphemus but comparison of the full sequence revealed that “the catalytic triad of histidine, serine, aspartate . . . to be more similar between Tachypleus and Limulus”). Patent Owner asserts that “Petitioner’s reliance on a statement made by Dr. Mizumura in a declaration submitted during prosecution of the ’767 Application fails to fill the gap in the analysis” regarding reasonable expectation of success, because the declaration “offers no evidence of the percentage of conserved amino acid substitutions that exist to support the conclusion that a POSA would have expected residual activity to be maintained between Tachypleus tridentatus and Limulus polyphemus” PO Resp. 47. However, as noted above, Dr. Mizumura provides an alignment of Factor C proteins from the two different species of horseshoe crab, determines that the similarity between the amino acid sequence is 99.5%, states that the amino acid residues that can undergo N-type sugar chain that L. polyphemus, like T. tridentatus, would also be less susceptible to inhibition by ions. Ex. 1029, 4–5. For the reasons discussed above, we also disagree with Patent Owner’s assertion that Petitioner’s reasonable expectation of success argument is “nothing more than conclusory assertions with no support.” PO Resp. 46. Rather, we find Petitioner has shown, by a preponderance of the evidence, that a POSA would have had reason to combine the teachings of Mizumura and the ’498 PCT, with a reasonable expectation of success in arriving at the Factor C protein recited in claim 21.” slip op. at 38

  Patent outcomesUS 11,236,318 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,236,318
• Medtronic, Inc. v. Moskowitz Family LLCInstituted
  PTAB · Aug 20, 2026 · IPR2026-00162 · APJ John A Squires · IPR · Director review

  The Director granted the petition and instituted inter partes review of claims 8, 9, 13, and 17–21 based on Palmatier.

  RulingsDirector review decision

  • Director reviewOther

    “Before JOHN A. SQUIRES, Under Secretary of Commerce for Intellectual Property and Director of the United States Patent and Trademark Office. DECISION Granting Institution of Inter Partes Review” slip op. at 1

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “1 US 9,445,919 B2, issued Sept. 20, 2016 (Ex. 1057). 2 At this preliminary stage, Petitioner establishes a reasonable likelihood that Palmatier anticipates or renders obvious the challenged claims (Pet. 22–66), and Patent Owner does not challenge Petitioner’s showings as to Palmatier.” slip op. at 2

  • BurdenDecided for petitioner

    “1 US 9,445,919 B2, issued Sept. 20, 2016 (Ex. 1057). 2 At this preliminary stage, Petitioner establishes a reasonable likelihood that Palmatier anticipates or renders obvious the challenged claims (Pet. 22–66), and Patent Owner does not challenge Petitioner’s showings as to Palmatier.” slip op. at 2

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

    “Patent Owner does present some evidence of conception, diligence, and constructive reduction to practice, but Petitioner persuasively disparages that evidence on the preliminary record. For example, Patent Owner relies on April and May 2011 emails exchanged between two or more of the named inventors (Exs. 2027–2031, 2056, 2057, 2059) and a declaration from one of the named inventors, Dr. Nathan Moskowitz (Ex. 2024), to show conception of the claimed subject matter. Prelim. Resp. 8–61. Patent Owner also relies on Dr. Moskowitz’s declaration and emails (Exs. 2045, 2049, 2050) to show reasonably continuous diligence leading up to the filing of a provisional patent application. Id. at 63–66. Petitioner asserts that the documentary evidence does not show conception of the claimed “ridges,” in part, because a key email attachment regarding an embodiment for ridges has not been provided. Pet. Reply 1–4. Petitioner also asserts that Patent Owner’s relies on the declaration testimony from only one named inventor, which is vague and should be the subject of cross-examination. Id. Given these disputes, during trial, the parties are free to develop the record as to the asserted prior conception and diligent reduction to practice of the claimed subject matter, relative to Palmatier’s filing date.” slip op. at 3

  § 102 anticipation
  Patents in suitUS 12,011,367
• Alliance Laundry Systems, LLC v. Payrange LLCSome claims unpatentable
  PTAB · Aug 19, 2026 · PGR2025-00028 · APJ George R Hoskins · PGR · Final written decision

  Claims 1–6 and 8–20 are unpatentable under § 102, § 103, or § 101; claim 7 was not shown unpatentable because the asserted grounds did not establish its limitations.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “1. Legal Standards “Anticipation requires that every limitation of the claim in issue be” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed

    “2016) (alteration in original) (quoting Kinetic Concepts, 688 F.3d at 1368). Further, an assertion of obviousness “cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” KSR, 550 U.S. at 418 (quoting In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)); accord In re NuVasive, Inc., 842 F.3d 1376, 1383 (Fed. Cir. 2016) (stating that “conclusory statements” amount to an “insufficient articulation[] of motivation to combine”; “instead, the finding must be supported by a ‘reasoned explanation’” (quoting In re Lee, 277 F.3d 1338, 1342 (Fed. Cir. 2002))); In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016) (“To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.”).” slip op. at 36

  • Patent Eligibility (§101) › Alice/Mayo step one — 'directed to'Step1 directed to exceptionMixed

    “because the “user interface” limitations merely apply the recited abstract idea on a generic mobile device without meaningfully limiting the abstract idea. See 2025 Guidance, at 4–5. For example, these limitations do not reflect an improvement to the functioning of the mobile device (or any other computer device), and instead are “mere instructions to implement an abstract idea or other exception on” the mobile device. Id. Indeed, the ’423 patent specification describes only a generic “swipe-to-pay” feature. See, e.g., Ex. 1001, 7:13–33, Figs. 8C, 10A–10D. This supports our conclusion here that the claim 11 limitations do not integrate the recited abstract idea into a practical application. See MPEP § 2106.04(d)(1) (“[T]he specification should be evaluated to determine if the disclosure provides sufficient details such that one of ordinary skill in the art would recognize the claimed invention as providing an improvement,” and “it must describe” slip op. at 108

  • Patent Eligibility (§101) › Alice/Mayo step two — inventive conceptStep2 no inventive conceptMixed

    “because the “user interface” limitations merely apply the recited abstract idea on a generic mobile device without meaningfully limiting the abstract idea. See 2025 Guidance, at 4–5. For example, these limitations do not reflect an improvement to the functioning of the mobile device (or any other computer device), and instead are “mere instructions to implement an abstract idea or other exception on” the mobile device. Id. Indeed, the ’423 patent specification describes only a generic “swipe-to-pay” feature. See, e.g., Ex. 1001, 7:13–33, Figs. 8C, 10A–10D. This supports our conclusion here that the claim 11 limitations do not integrate the recited abstract idea into a practical application. See MPEP § 2106.04(d)(1) (“[T]he specification should be evaluated to determine if the disclosure provides sufficient details such that one of ordinary skill in the art would recognize the claimed invention as providing an improvement,” and “it must describe” slip op. at 108

  Patent outcomesUS 11,972,423 mixed
  § 101 eligibility§ 102 anticipation§ 103 obviousnesscites Alice · Mayo · Bilski · Enfish · Electric Power · KSR · Graham
  Patents in suitUS 11,972,423
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthSome claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00249 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1 and 4–8 are unpatentable: claims 1 and 4–6 as obvious over Huang2 and Kuo, and claims 7–8 as anticipated by Huang2; claims 2–3 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “(“POSITA”) “would be a Ph.D. student with a minimum of two years of experience in their faculty advisor’s laboratory” and would have an understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 20– 21 (citing Ex. 1003 § II.C7). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:28–29. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”). Importantly, the Specification does not treat the existence of minor peaks as prerequisites for the existence of major peaks. Indeed, the Specification does not discuss “minor peaks” at all. See generally Ex. 1001. Likewise, none of the claims of the ’227 patent, whether challenged or unchallenged, recites “minor peaks” or any additional peaks beyond the disputed “major peaks.” Id. at 23:30–24:42. Nor does the Specification include an example of FFT analysis results in which the average of the peaks therein is calculated and those higher than the average are identified as major peaks.8” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMixed

    “Petitioner has the better position. Huang2 teaches crosslinking and provides a reason for doing so (stability). In particular, Huang2 states: “To better mimic skin ECM, electrospun collagen fibers have been fabricated, however, the rapid degradation and poor mechanical properties determine that either crosslinking or combination with other materials is necessary to obtain a stable scaffold.” Ex. 1005, 1791 (emphasis added). It is true that, in describing work actually carried out, Huang2 states that blending with PCL was performed and does not mention crosslinking. See id. at 1792 (“Nanofibrous matrices of PCL and Collagen at a weight ratio of 3:1 were fabricated using electrospinning as previously described.”). However, the prior art – here, Huang2 – is not limited to that which it describes having created. See In re Mills, 470 F.2d 649, 651 (C.C.P.A. 1972) (“a reference is not limited to the disclosure of specific working examples”); see also In re Lemelson, 397 F.2d 1006, 1009 (CCPA 1968) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”); In re Fritch, 972 F.2d 1260, 1264 (Fed. Cir. 1992) (“It is well settled that a prior art reference is relevant for all that it teaches to those of ordinary skill in the art.”). Huang2 teaches two stabilization methods when using collagen in scaffolds. Huang2 states that one or the other “is necessary to obtain a stable scaffold” (when using collagen), but it does not preclude or teach away from using Patent Owner-cited testimony of Dr. Mikos is not as definitive as Patent Owner suggests; Dr. Mikos’s testimony is that a person of ordinary skill in the art “typically would not have done both.” Ex. 2015 ¶64 (emphasis added). The bottom line is that Huang2 teaches the person of ordinary skill in the art two ways to stabilize scaffolds/matrices comprised of collagen, provides a reason for doing so (stability), and does not teach away from using both. We are persuaded that a “scaffold comprising crosslinked fibers comprising collagen” would have been obvious in view of the cited teachings of Huang2.” slip op. at 33

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We are not persuaded by Appellant’s citations to either reference. As discussed above, Petitioner’s Ground 1 is premised on a person of ordinary skill in the art altering the native flat sheet structure of Huang2 by rolling it into a jelly-roll structure as taught by Kuo. See Pet. 41 (Beginning its claim 2 arguments with the following: “Claim 1 is obvious for the reasons expressed above in § X.A., supra, which are incorporated herein.”); see also Pet. Reply 17 (“[B]ased on the explicit teaching of Kuo, a POSA would have been motivated to take the electrospun flat scaffold made by the techniques of Huang2, seed it with the desired cells, and roll it to treat a tendon and ligament.” (emphasis added)). Indeed, the paragraphs of Kuo that Petitioner cites for disclosing “scaffold sheets,” explicitly describe rolling them into jelly-roll like structures. See Ex. 1018 ¶7 (stating that “the sheet is spirally contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct”), ¶22 (describing a method comprising “forming a tissue construct by contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct” and implanting it in a patient). Petitioner fails to argue that that “one or more elongated sheets” recited in claim 2 would encompass the rolled structure of its proposed modification. Nor does Petitioner articulate a claim construction argument that could support such an argument. Petitioner has failed to prove, by a preponderance of the evidence, that claim 2 would have been obvious over Huang2 and Kuo.” slip op. at 42

  Patent outcomesUS 11,318,227 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman · KSR
  Patents in suitUS 11,318,227
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthAll claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00248 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1–3 and 5–12 are unpatentable as anticipated by Huang2; claim 4 is unpatentable as obvious over Huang2 and Kumbar. Lee grounds failed.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 18– 19 (citing Ex. 1003 § II.C5). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 5–6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “A patentee “may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (citing Hoechst Celanese Corp. v. BP Chemicals Ltd., 78 F.3d 1575, 1578 (Fed. Cir. 1996)); see Markman v. Westview Instruments, Inc., 52 F.3d 967, 980 (Fed. Cir. 1995) (en banc) (“[A]ny special definition given to a word must be clearly defined in the specification.”), aff'd, 517 U.S. 370 (1996); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366 (Fed. Cir. 2002). “[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.” Bell Atlantic Network Services, Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed. Cir. 2001). Among the criteria to consider in whether the patentee acted as a lexicographer to define a claim term include (a) whether the patent specification included the statement in question under a section for marks, (c) whether the sentence uses the term “refer to,” which generally “conveys an intent for [that sentence] to be definitional,” and (d) whether there are other non-limiting terms (e.g., “for example,” or “include”) that contradict a definitional intent. Alnylam Pharms., Inc. v. Moderna, Inc., 138 F.4th 1326, 1333 (Fed. Cir. 2025) (alteration in original). At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:6–7. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at issue sets out “major peaks” in quotation marks, and then uses the term “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “As discussed above, we agree with Patent Owner that the sentence it cites from the Specification of the ’223 patent bears sufficient hallmarks of lexicography. However, the Specification nonetheless lacks any indication that so-called “minor peaks” are a necessary component of the claimed invention. “Although it is firmly settled that an applicant may act as a 9 Figure 8B does not contain “major peaks” despite clearly depicting two “peaks higher than the average of the [three or possibly four] peaks in the result” because none of the peaks is a reflection of fiber alignment. 10 After presenting claim construction arguments based on Ayres 2008, Patent Owner confusingly states: “Finally, whether Ayres-2008 supports [Patent Owner’s] construction is irrelevant.” PO Sur-Reply 5 (emphasis added). definition that is contrary to the ordinary meaning of a claim term unless it communicates a deliberate and clear preference for this alternative definition.” Kumar v. Ovonic Battery Co., 351 F.3d 1364, 1368 (Fed. Cir. 2003). There is no indication that the patentee sought to require “minor peaks” within the scope of the claimed invention. Nor are we persuaded that a person of ordinary skill in the art would readily understand the scope of the term “major peaks” to require non-major peaks. We interpret the Specification’s statement that “‘major peaks’ herein refer to peaks higher than the average of the peaks in the result” (Ex. 1001, 13:6–7) to be teaching a person of ordinary skill in the art how to identify or discern “major peaks,” which indicate a principal axis of alignment, from any non-major peaks, which would be caused by something else. We conclude that a person of ordinary skill in the art would consider “major peaks” as used in the ’223 patent as referring to peaks that reflect the sole axis or primary axis of fiber alignment. See, e.g., id. at code (54) (“ALIGNED FIBER AND METHOD OF USE THEREOF”), code (57) (“A scaffold comprising an aligned fiber.”), 1:6–7 (“The invention relates to an aligned fiber and method of use thereof.”), 1:11–12 (“The invention relates to a scaffold comprising an aligned fiber.”), 13:16–17 (“Alignment of the fibers in the scaffold may be measured by a fast Fourier transform (FFT) analysis.”). This would certainly include peaks materially higher than the average of the peaks in the result, but it would not be limited to situations involving peaks of different heights or require so-called minor peaks. Based on the totality of the evidence before us, we do not construe the claims to require non-major peaks.” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Petitioner argues that, for the aligned sample, a major peak occurs at about 90° as identified by Petitioner’s annotation (red arrow). Pet. 30–31. As support, Petitioner directs us to Huang2’s explicit description of what the peak indicates, namely that “[t]he narrow peak of the normalized intensity values in anisotropic [aligned] matrices (Figure 1C) indicated that PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 31 (alterations in original) (quoting Ex. 1005, 1794). Patent Owner disputes that the illustrated peak is a major peak solely based on the lack of any lesser peaks. See PO Resp. 13 (“[T]he height of the sole peak is identical to—not higher than—the average height of the peaks in the result.”). As discussed above, however, we do not construe “major peaks” as requiring the existence of non-major peaks. We find that the illustrated peak in the Aniso plot of the FFT analysis results (Figure 1C) is a major peak within the meaning of the claim. The evidence in support of this finding is overwhelming. First, the term “Aniso” as used in Huang2 refers to fibers “with alignment.” Ex. 1005, 1792. Huang2 describes fabricating such matrices of aligned fibers with electrospinning, the same method used to impart alignment in the ’223 patent. Id. at 1791–92. Huang2 visually confirms that the fibers in fact are aligned via scanning electron microscopy. Id. at Fig. 1B. Further, Huang2 explicitly states that the peak illustrated in the Aniso plot of the FFT analysis results (Figure 1C) is caused by the fact that the “PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 1794. This is precisely what electrospinning may yield aligned fibers and images of aligned fibers will yield FFT results with major peaks. Ex. 1001, 2:18–19, 4:46–60, 13:16–26. Additionally, Huang2 itself considers the peak illustrated in the Aniso plot of the FFT analysis to be significant, stating: “In contrast [to the Aniso plot], the lack of a significant peak for the fibers collected on a stationary surface [(i.e., without electrospinning)] demonstrated no preferred fiber orientation in the isotropic matrices” (i.e., the Iso plot). Ex. 1005, 1794. Indeed, the asserted major peak in the Aniso plot shown in Huang2’s Figure 1C is higher than any other data point on the plot. For these reasons, we find the peak to be a major peak.15 Petitioner acknowledges that Figure 1C only reports its results” slip op. at 32

  Patent outcomesUS 10,137,223 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman
  Patents in suitUS 10,137,223

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.