• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10

  Patent outcomesUS 9,527,094 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 9,527,094
• Evenflo Company, Inc. v. Baby Jogger II, LLCAll claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53

  Patent outcomesUS 11,731,682 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 11,731,682
• Merck Sharp And Dohme LLC v. Halozyme, Inc.All claims unpatentable
  PTAB · Sep 25, 2026 · PGR2025-00033 · APJ Michael A Valek · PGR · Final written decision

  Claims 1, 2, and 6–29 are unpatentable for lack of written description and enablement; the Board did not find them obvious over the ’429 patent and Chao.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “structural connections and three-dimensional modeling Patent Owner’s experts attempt to make (see, e.g., Ex. 2070 ¶¶ 126–212, 297–342; Ex. 2068 ¶¶ 123–125, 245, 294–313, 318) do not appear in the written description itself. To the extent the experts disagree on this point, we credit the testimony of Petitioner’s experts over that of Patent Owner’s. See Ex. 1133 ¶¶ 111–230 (identifying problems with the approaches proposed by Patent Owner’s experts). For these reasons, we find that a preponderance of the evidence of record better supports a finding that in the 2011–2012 timeframe, it would have been unpredictable to identify which multiple mutants retained hyaluronidase activity, even with the single substitution data provided by the ’652 patent.” slip op. at 58

  • Skill levelOther

    “II. ANALYSIS A. Level of Ordinary Skill in the Art We consider the grounds of unpatentability in view of the” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Decided for petitioner

    “exclude the use of modified PH20 polypeptides as contraceptives—the only other possible utility described in the ’652 patent—is unavailing. Resp. 39. First, “[t]he fact that a patent asserts that an invention achieves several objectives does not require that each of the claims be construed as limited to structures that are capable of achieving all of the objectives.” Phillips, 415 F.3d at 1327 (citing Liebel–Flarsheim Co. v. Medrad, Inc., 358 F.3d 898, 908 (Fed. Cir. 2004)). Second, unlike the definitions of “PH20” and “modified PH20 polypeptide” in the “Definitions” section of the Specification, the passages describing possible contraceptive use do not contain any characteristics suggesting they are definitional in nature. See Alnylam, 138 F.4th at 133 (enumerating “characteristics” such as the fact that the text appears in the “Definitions” section, sets the term off in quotation marks, and uses phrases like “refer to” that indicate that specification language is definitional in nature). Accordingly, the statement that “[a]lso provided are modified PH20 polypeptides that are inactive, and that can be used, for example, as antigens in contraception vaccines” (Ex. 1001, 75:56–58), does not redefine the term, nor otherwise void the definitional language in the Specification stating that a “modified PH20 polypeptide can have up to 150 amino acid replacements, so long as the resulting modified PH20 polypeptide exhibits hyaluronidase activity.” Id. at 48:47–49 (emphasis added).” slip op. at 26

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “1352. While a POSA might be able to embark on their own research program to try to find the genus of multiply-modified PH20 polypeptides recited in the challenged claims, the four corners of the written description here do not demonstrate the inventors were in possession of such. See id. at 1356–57 (recognizing that “[p]erhaps one of ordinary skill could discover this information, but this does not alter our conclusion that the description . . . just represent a wish or arguably a plan for future research”) (internal quotation omitted).” slip op. at 68

  Patent outcomesUS 12,049,652 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 12,049,652
• Charles River Laboratories, Inc. v. Seikagaku CorporationAll claims unpatentable
  PTAB · Sep 8, 2026 · IPR2025-00440 · APJ Tawen Chang · IPR · Final written decision

  Claim 21 is unpatentable as obvious over Mizumura with either the ’498 PCT or McClymont; the Revised Contingent Motion to Amend proposing claim 22 is denied.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “overlap to a significant degree, i.e., a person with a Ph.D. in a discipline related to biological sciences and having had at least two years of work experience. However, the parties’ proposals differ slightly in the specific subjects in which a POSA would have had a doctoral degree, and whether the person’s work experience must have been directly related to horseshoe crab Factor C. As an initial matter, we find that a rigid requirement as to the subject of a POSA’s doctoral degree (e.g., biochemical engineering, enzymology), or experience working specifically with horseshoe crab proteins, is not consistent with the evidence of record. See, e.g., Ex. 1067, 20:23–21:2 (Dr. Schaefer testifying that the fact the “name of [his] Ph.D. is immunology . . . does not change the fact that the core of [his] thesis training was really in molecular biology”), 22:3–15 (explaining “the fact that the production of proteins recombinantly is mostly species agnostic”); Ex. 1069, 45:20–47:17 (Dr. Morris testifying that whether a person is a POSA depends on the person’s “experience, [ ] publications,” and work done for the Ph.D. rather than the name of the Ph.D. program). We also find that evidence of record supports Petitioner’s assertion that, for purposes of defining a POSA, “[m]ore education could substitute for experience, and vice versa.” See, e.g., Pet. 19; Ex. 1065, 99:14–100:3. with respect to the claims of the ’318 patent would have had a Ph.D. in molecular biology, biochemistry, or a related discipline, and about two years of experience with cloning genes, expressing cloned genes as proteins, and/or characterizing such cloned genes and proteins, with more education being able to substitute for experience, and vice versa. A POSA may also have collaborated with others, including those with specific experience in utilizing or assessing horseshoe crab Factor C for endotoxin detection and quantitation.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction The parties agree that “the terms in claim 21 can be afforded their plain and ordinary meaning for purposes of this proceeding” without further construction. Pet. 19–20; PO Resp. 11. Because express claim construction is not needed to resolve the issues in this case, we need not, and do not, construe expressly any claim term for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

    “Carrying Out the Invention section, that “[t]he Factor C of the present invention is a Factor C derived from a horseshoe crab,” and states later in the same section that “[e]xamples of the horseshoe crab include . . . Limulus polyphemus.” Ex. 1006, 40. However, none of the remaining portions of ’767 application cited by Patent Owner relate directly to L. polyphemus; instead, the remaining portions of ’767 application cited by Patent Owner are directed to other species, in particular the Japanese horseshoe crab T. tridentatus. Further, Patent Owner’s witness, Dr. Schaefer, conceded that the ’767 application does not contain Factor C sequence information for L. polyphemus. See, e.g., Ex. 1067, 44:25–45:23. Although “[n]o length requirement exists for a disclosure to adequately describe an invention,” Falko-Gunter, 448 F.3d at 1365–1366, we are persuaded that a POSA would not, based on the totality of the above disclosures, reasonably understand that the inventors were in possession of the claimed HEK-293 recombinant L. polyphemus Factor C protein, in view of the state of the art as of December 10, 2013. In this regard, we note that adequate written description of a biological molecule, such as a HEK293 recombinant L. polyphemus Factor C protein, requires “more than a mere statement that it is part of the invention and reference to a potential method for isolating it”; instead, what is required is “‘a precise definition, such as by structure, formula, chemical name, or physical properties,’ not a mere wish or plan for obtaining the claimed chemical invention.” The Regents of the” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1364 (Fed. Cir. 2007). Neither do we see Petitioner’s arguments regarding the December 10, 2013 priority date to be “mutually opposed” as Dr. Schaefer testified. Ex. 1067, 216:4– 24. Instead, we credit evidence of record, including Dr. Jain’s testimony and the February 22, 2018 Mizumura Declaration, that existence of the full sequence would permit a more complete analysis and that such an analysis would provide a POSA with a reasonable expectation that the claimed L. polyphemus recombinant protein would have a residual activity within the claimed range. See, e.g., Ex. 1029, 2–5; Ex. 1010, 48; Ex. 1065, 117:14– 130:24 (explaining that comparison of partial sequences in the Tokunaga 1991 publication showed “difference around the cleavage site” between T. tridentatus and L. polyphemus but comparison of the full sequence revealed that “the catalytic triad of histidine, serine, aspartate . . . to be more similar between Tachypleus and Limulus”). Patent Owner asserts that “Petitioner’s reliance on a statement made by Dr. Mizumura in a declaration submitted during prosecution of the ’767 Application fails to fill the gap in the analysis” regarding reasonable expectation of success, because the declaration “offers no evidence of the percentage of conserved amino acid substitutions that exist to support the conclusion that a POSA would have expected residual activity to be maintained between Tachypleus tridentatus and Limulus polyphemus” PO Resp. 47. However, as noted above, Dr. Mizumura provides an alignment of Factor C proteins from the two different species of horseshoe crab, determines that the similarity between the amino acid sequence is 99.5%, states that the amino acid residues that can undergo N-type sugar chain that L. polyphemus, like T. tridentatus, would also be less susceptible to inhibition by ions. Ex. 1029, 4–5. For the reasons discussed above, we also disagree with Patent Owner’s assertion that Petitioner’s reasonable expectation of success argument is “nothing more than conclusory assertions with no support.” PO Resp. 46. Rather, we find Petitioner has shown, by a preponderance of the evidence, that a POSA would have had reason to combine the teachings of Mizumura and the ’498 PCT, with a reasonable expectation of success in arriving at the Factor C protein recited in claim 21.” slip op. at 38

  Patent outcomesUS 11,236,318 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,236,318
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthAll claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00248 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1–3 and 5–12 are unpatentable as anticipated by Huang2; claim 4 is unpatentable as obvious over Huang2 and Kumbar. Lee grounds failed.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 18– 19 (citing Ex. 1003 § II.C5). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 5–6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “A patentee “may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (citing Hoechst Celanese Corp. v. BP Chemicals Ltd., 78 F.3d 1575, 1578 (Fed. Cir. 1996)); see Markman v. Westview Instruments, Inc., 52 F.3d 967, 980 (Fed. Cir. 1995) (en banc) (“[A]ny special definition given to a word must be clearly defined in the specification.”), aff'd, 517 U.S. 370 (1996); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366 (Fed. Cir. 2002). “[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.” Bell Atlantic Network Services, Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed. Cir. 2001). Among the criteria to consider in whether the patentee acted as a lexicographer to define a claim term include (a) whether the patent specification included the statement in question under a section for marks, (c) whether the sentence uses the term “refer to,” which generally “conveys an intent for [that sentence] to be definitional,” and (d) whether there are other non-limiting terms (e.g., “for example,” or “include”) that contradict a definitional intent. Alnylam Pharms., Inc. v. Moderna, Inc., 138 F.4th 1326, 1333 (Fed. Cir. 2025) (alteration in original). At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:6–7. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at issue sets out “major peaks” in quotation marks, and then uses the term “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “As discussed above, we agree with Patent Owner that the sentence it cites from the Specification of the ’223 patent bears sufficient hallmarks of lexicography. However, the Specification nonetheless lacks any indication that so-called “minor peaks” are a necessary component of the claimed invention. “Although it is firmly settled that an applicant may act as a 9 Figure 8B does not contain “major peaks” despite clearly depicting two “peaks higher than the average of the [three or possibly four] peaks in the result” because none of the peaks is a reflection of fiber alignment. 10 After presenting claim construction arguments based on Ayres 2008, Patent Owner confusingly states: “Finally, whether Ayres-2008 supports [Patent Owner’s] construction is irrelevant.” PO Sur-Reply 5 (emphasis added). definition that is contrary to the ordinary meaning of a claim term unless it communicates a deliberate and clear preference for this alternative definition.” Kumar v. Ovonic Battery Co., 351 F.3d 1364, 1368 (Fed. Cir. 2003). There is no indication that the patentee sought to require “minor peaks” within the scope of the claimed invention. Nor are we persuaded that a person of ordinary skill in the art would readily understand the scope of the term “major peaks” to require non-major peaks. We interpret the Specification’s statement that “‘major peaks’ herein refer to peaks higher than the average of the peaks in the result” (Ex. 1001, 13:6–7) to be teaching a person of ordinary skill in the art how to identify or discern “major peaks,” which indicate a principal axis of alignment, from any non-major peaks, which would be caused by something else. We conclude that a person of ordinary skill in the art would consider “major peaks” as used in the ’223 patent as referring to peaks that reflect the sole axis or primary axis of fiber alignment. See, e.g., id. at code (54) (“ALIGNED FIBER AND METHOD OF USE THEREOF”), code (57) (“A scaffold comprising an aligned fiber.”), 1:6–7 (“The invention relates to an aligned fiber and method of use thereof.”), 1:11–12 (“The invention relates to a scaffold comprising an aligned fiber.”), 13:16–17 (“Alignment of the fibers in the scaffold may be measured by a fast Fourier transform (FFT) analysis.”). This would certainly include peaks materially higher than the average of the peaks in the result, but it would not be limited to situations involving peaks of different heights or require so-called minor peaks. Based on the totality of the evidence before us, we do not construe the claims to require non-major peaks.” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Petitioner argues that, for the aligned sample, a major peak occurs at about 90° as identified by Petitioner’s annotation (red arrow). Pet. 30–31. As support, Petitioner directs us to Huang2’s explicit description of what the peak indicates, namely that “[t]he narrow peak of the normalized intensity values in anisotropic [aligned] matrices (Figure 1C) indicated that PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 31 (alterations in original) (quoting Ex. 1005, 1794). Patent Owner disputes that the illustrated peak is a major peak solely based on the lack of any lesser peaks. See PO Resp. 13 (“[T]he height of the sole peak is identical to—not higher than—the average height of the peaks in the result.”). As discussed above, however, we do not construe “major peaks” as requiring the existence of non-major peaks. We find that the illustrated peak in the Aniso plot of the FFT analysis results (Figure 1C) is a major peak within the meaning of the claim. The evidence in support of this finding is overwhelming. First, the term “Aniso” as used in Huang2 refers to fibers “with alignment.” Ex. 1005, 1792. Huang2 describes fabricating such matrices of aligned fibers with electrospinning, the same method used to impart alignment in the ’223 patent. Id. at 1791–92. Huang2 visually confirms that the fibers in fact are aligned via scanning electron microscopy. Id. at Fig. 1B. Further, Huang2 explicitly states that the peak illustrated in the Aniso plot of the FFT analysis results (Figure 1C) is caused by the fact that the “PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 1794. This is precisely what electrospinning may yield aligned fibers and images of aligned fibers will yield FFT results with major peaks. Ex. 1001, 2:18–19, 4:46–60, 13:16–26. Additionally, Huang2 itself considers the peak illustrated in the Aniso plot of the FFT analysis to be significant, stating: “In contrast [to the Aniso plot], the lack of a significant peak for the fibers collected on a stationary surface [(i.e., without electrospinning)] demonstrated no preferred fiber orientation in the isotropic matrices” (i.e., the Iso plot). Ex. 1005, 1794. Indeed, the asserted major peak in the Aniso plot shown in Huang2’s Figure 1C is higher than any other data point on the plot. For these reasons, we find the peak to be a major peak.15 Petitioner acknowledges that Figure 1C only reports its results” slip op. at 32

  Patent outcomesUS 10,137,223 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman
  Patents in suitUS 10,137,223
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Merck Sharp & Dohme LLC v. Halozyme, Inc.All claims unpatentable
  PTAB · Jun 8, 2026 · PGR2025-00004 · APJ Susan L C Mitchell · PGR · Final written decision

  Claims 1–4, 7–19, and 22 are unpatentable under § 112(a) for lack of written description and enablement, and under § 103 as obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “II. ANALYSIS A. Level of Ordinary Skill in the Art We consider the grounds of unpatentability in view of the” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. Petitioner’s Position Petitioner asserts that the “terms used in the claims are either” slip op. at 12

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “7. Analysis We find the preponderance of the evidence supports a finding that the” slip op. at 59

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable

    “6. Analysis Petitioner has the burden to identify how the specification allegedly” slip op. at 70

  Patent outcomesUS 12,018,298 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 12,018,298
• Motorola Mobility LLC / Google LLC v. Multifold International Incorporated Pte. Ltd.All claims unpatentable
  PTAB · May 15, 2026 · IPR2025-00038 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 1–7, 10–13, 16, 17, 19, and 20 are unpatentable as obvious over Chin; the Board did not find them anticipated by Chin or Whitehorn.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that [a] person of ordinary skill in the art . . . (‘POSITA’) would have had at least a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field plus at least two years of work or post-graduate experience in image capture, image processing, image display, user interfaces, or a related field. Additional education could offset a lesser amount of experience and vice versa. Pet. 16. Patent Owner accepts Petitioner’s definition. See PO Resp. 25. We adopt Petitioner’s undisputed definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’842 Patent Specification and the asserted prior art.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “We agree with Petitioner that claim construction is unnecessary. As demonstrated in the analysis provided below addressing this claim limitation in view of the prior art, we need not explicitly construe “wherein in each image capture mode a display on the first or second screen is different.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Similarly, we need not construe any other claim terms or phrases to resolve the controversy between the parties.” slip op. at 9

  • Strike new argumentNew argument disregardedDecided for patent owner

    “We agree with Patent Owner that Petitioner’s arguments relying on Kennametal are belated. A “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Patent Trial and Appeal Board Consolidated Trial Practice Guide (Nov. 2019)6 at II.I. Thus, we need not consider Petitioner’s belated argument raised for the first time in the Reply. In any event, we agree that Kenneametal is inapplicable for the purpose of supplying a claim limitation missing from Chin’s disclosure. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 851 F.3d 1270, 1274 (Fed. Cir. 2017) (“Kennametal does not stand for the proposition that a reference missing a limitation can anticipate a claim if a skilled artisan viewing the reference would ‘at once envisage’ the missing limitation.”). Chin’s disclosure is silent regarding what is or is not displayed on first display 51 when images are displayed on second display 52 in self-photographing mode, and similarly silent regarding what is or is not 6 Available at www.uspto.gov/patents/ptab/trial-practice-guide. displayed on second display 52 when images are displayed on first display 51 in outward-facing mode. See generally Ex. 1004.” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that the theory of inherency was not raised in the Petition and is therefore waived. Compare Pet. 29–33, with Pet. Reply 11–15. In any event, we also agree that Petitioner’s speculation regarding the disclosure of Chin is insufficient to support a theory of inherency. See Pet. Reply 11–15. As explained above, Chin’s disclosure is silent regarding what is or is not displayed on first display 51 when images are displayed on second display 52 in self-photographing mode, and similarly silent regarding what is or is not displayed on second display 52 when images are displayed on first display 51 in outward-facing mode. See Ex. 1004. Speculation regarding the possibilities and probabilities of what is displayed on first display 51 in self-photographing mode, and what is displayed on second display 52 in outward-facing mode are insufficient to establish inherency. See In re Robertson, 169 F.3d at 745. For the forgoing reasons and based on the entire record developed during trial, the preponderance of the evidence does not support Petitioner’s showing that Chin discloses “wherein in each image capture mode a display on the first or second screen is different.” Accordingly, based on the entire record developed during trial the preponderance of the evidence does not support Petitioner’s showing that Chin anticipates claim 1.” slip op. at 20

  Patent outcomesUS 8,836,842 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,836,842

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.