• Gettattle, Inc. v. Afterwords, Inc.All claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00677 · APJ Ryan H Flax · IPR · Final written decision

  Claims 1–7, 10, 13, 16, 18, and 19 are unpatentable as anticipated by Douglas and Ganesh; the revised contingent motion to amend is denied.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “record before us, we conclude that Petitioner proves by a preponderance of the evidence that each challenged claim of the ’811 patent is anticipated by Douglas and by Ganesh. Accordingly, we find that claims 1–7, 10, 13, 16, 18, and 19 of the ’811 patent are unpatentable. Moreover, we find that Patent Owner’s Revised Contingent Motion to Amend adds new matter in every proposed substitute claim, and, therefore, the motion is denied.” slip op. at 80

  • 112 supportMotion to amend, deniedDenied

    “Because the RMTA does not meet the foundational statutory and regulatory requirements, we decline to reach Petitioner’s arguments as to the asserted unpatentability of the proposed substitute claims. C. CONCLUSION ON REVISED MOTION TO AMEND Because the RMTA does not meet foundational statutory and regulatory requirements for a motion to amend, it is denied.” slip op. at 80

  Patent outcomesUS 10,430,811 unpatentable
  § 102 anticipationcites Phillips
  Patents in suitUS 10,430,811
• Evenflo Company, Inc. v. Baby Jogger II, LLCAll claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53

  Patent outcomesUS 11,731,682 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 11,731,682
• Alliance Laundry Systems, LLC v. Payrange LLCSome claims unpatentable
  PTAB · Aug 19, 2026 · PGR2025-00028 · APJ George R Hoskins · PGR · Final written decision

  Claims 1–6 and 8–20 are unpatentable under § 102, § 103, or § 101; claim 7 was not shown unpatentable because the asserted grounds did not establish its limitations.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “1. Legal Standards “Anticipation requires that every limitation of the claim in issue be” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed

    “2016) (alteration in original) (quoting Kinetic Concepts, 688 F.3d at 1368). Further, an assertion of obviousness “cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” KSR, 550 U.S. at 418 (quoting In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)); accord In re NuVasive, Inc., 842 F.3d 1376, 1383 (Fed. Cir. 2016) (stating that “conclusory statements” amount to an “insufficient articulation[] of motivation to combine”; “instead, the finding must be supported by a ‘reasoned explanation’” (quoting In re Lee, 277 F.3d 1338, 1342 (Fed. Cir. 2002))); In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016) (“To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.”).” slip op. at 36

  • Patent Eligibility (§101) › Alice/Mayo step one — 'directed to'Step1 directed to exceptionMixed

    “because the “user interface” limitations merely apply the recited abstract idea on a generic mobile device without meaningfully limiting the abstract idea. See 2025 Guidance, at 4–5. For example, these limitations do not reflect an improvement to the functioning of the mobile device (or any other computer device), and instead are “mere instructions to implement an abstract idea or other exception on” the mobile device. Id. Indeed, the ’423 patent specification describes only a generic “swipe-to-pay” feature. See, e.g., Ex. 1001, 7:13–33, Figs. 8C, 10A–10D. This supports our conclusion here that the claim 11 limitations do not integrate the recited abstract idea into a practical application. See MPEP § 2106.04(d)(1) (“[T]he specification should be evaluated to determine if the disclosure provides sufficient details such that one of ordinary skill in the art would recognize the claimed invention as providing an improvement,” and “it must describe” slip op. at 108

  • Patent Eligibility (§101) › Alice/Mayo step two — inventive conceptStep2 no inventive conceptMixed

    “because the “user interface” limitations merely apply the recited abstract idea on a generic mobile device without meaningfully limiting the abstract idea. See 2025 Guidance, at 4–5. For example, these limitations do not reflect an improvement to the functioning of the mobile device (or any other computer device), and instead are “mere instructions to implement an abstract idea or other exception on” the mobile device. Id. Indeed, the ’423 patent specification describes only a generic “swipe-to-pay” feature. See, e.g., Ex. 1001, 7:13–33, Figs. 8C, 10A–10D. This supports our conclusion here that the claim 11 limitations do not integrate the recited abstract idea into a practical application. See MPEP § 2106.04(d)(1) (“[T]he specification should be evaluated to determine if the disclosure provides sufficient details such that one of ordinary skill in the art would recognize the claimed invention as providing an improvement,” and “it must describe” slip op. at 108

  Patent outcomesUS 11,972,423 mixed
  § 101 eligibility§ 102 anticipation§ 103 obviousnesscites Alice · Mayo · Bilski · Enfish · Electric Power · KSR · Graham
  Patents in suitUS 11,972,423
• Kubota North America Corporation v. Vermeer Manufacturing CompanyAll claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00381 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1–10 are unpatentable: claims 1–8 and 10 are anticipated by KR996, and claim 9 is obvious over KR996 and Bares.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “2. Independent Claim 1 Petitioner contends that KR996 both anticipates and renders obvious independent claim 1. Pet. 23–46. To support its arguments, Petitioner identifies certain passages in the cited references and explains the significance of each passage with respect to the corresponding claim limitation. Id. Patent Owner argues that KR996 does not disclose a “loader support” and thus fails to disclose limitations requiring “linkage[s]” and an “actuator” attached to the “loader support.” See PO Resp. 37–40; PO Sur-reply 20. In addition, Patent Owner presents evidence of objective indicia of nonobviousness. See PO Resp. 51–68; PO Sur-reply 23–27. We address each issue in turn. a. The Loader Support Limitations Claim 1 recites, in relevant part, “[1.3] a loader support having a first side and a second side . . . ; [1.5] a first linkage connected to the first side of the loader support . . . ; [1.6] a second linkage connected to the first side of the loader support . . . ; [1.7] a second actuator for raising the loader, the second actuator being connected to the loader support.” Ex. 1001, 6:56, 6:60–7:1 (collectively, the “loader support limitations”). As to the recitation of “a loader support having a first side and a second side,” Petitioner provides the following annotated version of Figure 9 of KR996: Pet. 30. In the annotated version of Figure 9 of KR996 above, Petitioner added (1) red text and arrows identifying a “loader support,” a “first side of loader support,” and a “second side of loader support” and (2) blue text identifying a “loader.” Id. Petitioner adds that “the loader support includes the portions of the frame of the KR996 vehicle that when in operation, support the attached loader unit 40 having loader arms of the booms 44.” Pet. 29. Petitioner also states that “KR996’s loader support includes the bracket to which the link 45 and boom cylinder 46 attach, as well as the frame protrusion, connected to the bracket, to which the forward link attaches.” Id. (citing Velinsky Pet. Decl. ¶ 72).” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “2. Dependent Claim 9 Petitioner contends that KR996, modified based on Bares, satisfies the additional limitations of claim 9. Pet. 60–69. To support its arguments, Petitioner identifies certain passages in the cited references and explains the significance of each passage with respect to the corresponding claim limitation. Id. Petitioner also articulates reasons to combine the relied-upon aspects of KR996 and Bares and explains why there would have been a reasonable expectation of success. Pet. 62–65. Patent Owner argues that one of ordinary skill in the art would not have had reason to combine KR996 and Bares. See PO Resp. 41–50; PO Sur-reply 22–23. Patent Owner also relies on its prior arguments that KR996 does not disclose the “loader support” limitations in independent claim 1. See PO Resp. 50. In addition, Patent Owner relies on the same evidence of objective indicia of nonobviousness discussed above. See PO Resp. 51–68; PO Sur-reply 21–27. We address each issue in turn. a. The Reasons to Combine KR996 and Bares Petitioner presents reasons why one of ordinary skill in the art would have combined KR996 and Bares and why the proposed combination would have had a reasonable expectation of success. See Pet. 62–65; Velinsky Pet. Decl. ¶¶ 157–162. After discussing why KR996 and Bares are analogous art to the claimed invention, Petitioner states that one of ordinary skill in the art “would have been motivated to combine the teachings of Bares with KR996 to produce a predictable and beneficial configuration of a tracked vehicle” in that “[t]he simple substitution of Bares’ track assembly for the wheels in the KR996 vehicle would have been predictable with a reasonable expectation of success that both KR996 and Bares relate to similar vehicle types with a similar mainframe having a drive mechanism attached thereto.” Pet. 63 (citing Velinsky Pet. Decl. ¶¶ 158–162). Petitioner asserts that “designing this vehicle type with a drive” slip op. at 64

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness. In order to accord substantial weight to secondary considerations in an obviousness analysis, “the evidence of secondary considerations must have a ‘nexus’ to the claims, i.e., there must be ‘a legally and factually sufficient connection’ between the evidence and the patented invention.” Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1332 (Fed. Cir. 2019) (quoting Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988)); Quanergy Sys., Inc. v. Velodyne Lidar USA, Inc., 24 F.4th 1406, 1417 (Fed. Cir. 2022). Although the patent owner bears the initial burden of proving a nexus (WMS Gaming Inc. v. Int’l Game Tech., 184 F.3d 1339, 1359 (Fed. Cir. 1999)), a presumption of nexus may be appropriate if the patent owner shows “the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Polaris Indus, Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018) (quoting Brown & Williamson Tobacco Corp. v. Philip Morris Inc., 229 F.3d 1120, 1130 (Fed. Cir. 2000) (emphasis added)); Quanergy, 24 F.4th at 1417. On the other hand, “[w]hen the [product] is not coextensive with the patented invention—for example, if the patented invention is only a component of a commercially successful machine or process,” the patent owner is not entitled to a presumption of nexus. Demaco, 851 F.2d at 1392. A patent owner may establish nexus, either through (1) the use of a rebuttable presumption that arises when certain conditions are met or (2) a direct showing of nexus. In the first, a patent owner may rely on a rebuttable presumption of nexus as follows:” slip op. at 43

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part

    “2. Analysis “The moving party has the burden of proof to establish that it is entitled to the requested relief.” 37 C.F.R. § 42.20. Exhibit 1005 is an English language translation of Korean Patent No. 10-1041996. Exhibit 1006 is an English language translation of Japanese document JP2004-17705A. Exhibit 1014 is an English language translation of Korean Patent No. 10-1023528. A Certification of Translation signed by Takashi Maeshiro of HC Language Solutions, Inc., accompanies each of Exhibits 1005, 1006, and 1014. Ex. 1005 at 28; Ex. 1006 at 16; Ex. 1014 at 16. Each Certification of Translation is worded substantially the same except for the references to the document at issue and the source language being either Korean or Japanese. Exhibit 1005’s Certification of Translation, for example, states: I, Takashi Maeshiro, on behalf of HC Language Solutions, Inc., do solemnly and sincerely declare, to the best of my knowledge and belief, that the attached text represents a translation of Korean Patent No. 10-1041996, that the translation was performed by HC Language Solutions, Inc., and that the translation represents a true, correct, and faithful translation from Korean to English in a form that reflects the intention and meaning of the original text. I hereby declare that all statements made herein of my own knowledge are true and that all statements made on information and belief are believed to be true; and further that these statements were made with the knowledge that willful false statements and the like so made are punishable by fine or imprisonment, or both, under Section 1001 of Title 18 of the United States Code. Ex. 1005 at 28 (emphasis added).” slip op. at 17

  Patent outcomesUS 11,465,891 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,465,891
• First Quality Retail Services, LLC / First Quality Consumer Products, LLC et al. v. Essity Hygiene And Health ABAll claims unpatentable
  PTAB · May 12, 2026 · IPR2024-01487 · APJ Kristina M Kalan · IPR · Final written decision

  Claims 1–5, 7, 8, 20–22, 24, and 25 are unpatentable, based on anticipation by Bergstrom and obviousness over the stated combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Institution Decision, we adopted Petitioner’s definition. Dec. 9–10. In its Response, Patent Owner cites to Petitioner’s definition and states that Patent Owner “applies Petitioners’ definition.” PO Resp. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’138 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “We begin our analysis with the language of the claims. Phillips, 415 F.3d at 1312; see also SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 874–875 (Fed. Cir. 2004) (“There is a ‘heavy presumption’ that the terms used in the claims ‘mean what they say and have the ordinary meaning that would be attributed to those words by persons skilled in the relevant art.’”). Claim 1 recites, in relevant part, “said fluid flow control structure being a layered structure comprising a non-perforated fibrous polymeric layer and a first perforated polymeric layer.” Ex. 1001, 13:62–64 (limitation [1h]). The plain language of claim 1 does not address additional properties of the perforated polymeric layer; the language of the dependent claims, however, imposes additional limitations on the properties of the perforated polymeric layer such as a particular basis weight (claim 2), a particular makeup (claim 3), a particular aperture size (claim 7), a particular open area (claim 8), and that it “is a three-dimensionally formed layer having penetrating apertures extending from a first surface of the first perforated polymeric layer towards a second surface of the first perforated polymeric layer and forming protrusions on said second surface” (claim 4). The dependent claims’ additional language indicates that the term “perforated” within the term “perforated polymeric layer” in claim 1 is not limited in the manner asserted by Patent Owner’s proposed construction.” slip op. at 12

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “layer pierced through with holes or apertures,” we are persuaded that Petitioner meets its burden as to this limitation. Petitioner argues that under our construction, Bergstrom’s express disclosure of forming element 60, and Bergstrom’s explanation of the properties of forming element 60, meets the claimed “perforated polymeric layer” limitation. Pet. 38–41 (citing Ex. 1002 ¶¶ 114–117). Even under Patent Owner’s proposed construction, Petitioner argues, forming element 60 would also allow free flow of liquid bodily waste. Pet. Reply 3– 4 (citing Ex. 1021 ¶¶ 20–23). Importantly, Bergstrom expressly discloses: “suitable materials for the forming element 60 are plastic films, perforated plastic films and reinforced tissue or reinforced nonwoven materials.” Ex. 1004, 10:1–4. This express disclosure is clear. Even though the forming element 60 in Bergstrom might be “typically” liquid-impermeable (Ex. 1004, 9:24–30), that does not preclude a layer that is perforated, particularly where Bergstrom expressly discloses a perforated plastic film as one of the possibilities for forming element 60. Ex. 1004, 10:1–4. Additionally, although Patent Owner focuses on Bergstrom’s disclosure that forming element 60 is “typically liquid-impermeable” (PO Resp. 58–60; Ex. 1004, 9:24–30), we do not view Bergstrom’s use of the word “typically” as mandating that the forming element always be liquid impermeable. We agree that the word “typically” does not mean “always” and that such a reading would render “typically” superfluous. Pet. Reply. 5. We do not find any ambiguity in Bergstrom’s disclosure regarding possible use of perforated plastic films for its forming element 60; whether or not the forming element 60 provides other functions (like stiffness) does not dictate whether it may also be perforated, or be part of a fluid flow control structure. On this point, we credit Petitioner’s arguments and explanation, as supported by Dr. Pourdeyhimi’s testimony. Pet. Reply 6–7; Ex. 1021 ¶ 27–28 (“components of absorbent articles could be multifunctional”).” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “from the start” (PO Resp. 29), and that “using all or part of [Glaug’s] fluid-acquisition system in place of [Nakazawa’s] diffusion sheet would be antithetical to the teachings of both references” (id. at 35), we agree that the proposed combination of Nakazawa’s structure with the layers of Glaug is sufficiently motivated and reasonably expected to result in a successful article, for the reasons articulated by Petitioner. See, e.g., Pet. 59–65; Ex. 1002 ¶¶ 176–192. Namely, although fluid may flow in both Z directions in Nakazawa (PO Resp. 30), that does not foreclose the combination with Glaug in the manner proposed by Petitioner. See generally Ex. 1002 ¶¶ 176–192; see id. ¶ 184 (detailing the mechanics of the proposed combinations), ¶¶ 188–191 (discussing motivation to combine), ¶ 192 (discussing reasonable expectation of success). The combination can be achieved “either by adding the lower acquisition layer 64 [of Glaug] to diffusion sheet 63 [of Nakazawa], or by replacing diffusion sheet 63 [of Nakazawa] with the two-layer fluid acquisition system 34 [of Glaug],” and as persuasively explained by Dr. Pourdeyhimi, the arrangement constitutes a “fluid flow control structure.” See Ex. 1021 ¶¶ 45–47. Additionally, the diffusion sheet in Nakazawa can be made from the same material as used in Glaug, namely, AquiDry™. Id. ¶¶ 53–55; see also Tr. 17:25–18:3 (“although Glaug does not specify the name AquiDry in its disclosure, Patent Owner’s expert testified that it’s his understanding that Glaug is discussing the AquiDry material, the same material that is in Nakazawa . . . . they disclose using the same material, and Nakazawa says this material work[s]”). When asked if Patent Owner’s expert had any concerns that AquiDry was not the same as between Nakazawa and Glaug, Patent Owner’s counsel replied “They are the same, Your Honor. And we embrace that.” Tr. 46:8–12; see also id. at 58:19 (Petitioner’s counsel commenting about Patent Owner’s counsel: “they agree, AquiDry is used in both Nakazawa and Glaug”). Thus, Patent Owner’s argument that Nakazawa’s diffusion sheet and Glaug’s fluid acquisition layer have different purposes because Nakazawa’s diffusion sheet allegedly must promote fluid flow in the Z-directions, both toward and away from the body (PO Resp. 29–37; Ex. 2004 ¶¶ 26–28, 30– 35)) is not clearly supported by Nakazawa, and is also contravened by the shared disclosure of Nakazawa and Glaug as to the composition of the disputed layer. We have reviewed the complete record, including Patent Owner’s and Mr. Sheldon’s assertions that Nakazawa requires promoting fluid flow in both Z-directions (see id.), but find that Petitioner carries its burden to demonstrate that one of ordinary skill in the art would have been motivated to combine Nakazawa and Glaug with a reasonable expectation of success. On this complete record, Petitioner explains sufficiently why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, i.e., to use Glaug’s fluid acquisition system, or the lower non-perforated layer of its fluid acquisition system, in Nakazawa, and Petitioner provides well-supported reasons for doing so.” slip op. at 36

  Patent outcomesUS 9,308,138 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,308,138
• Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42

  Patent outcomesUS 9,103,105 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 9,103,105
• Allstate Insurance Company v. Atos, LLCSome claims unpatentable
  PTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand

  Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”

  RulingsRemand decision

  • RemandOther

    “was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35

  Patent outcomesUS 9,846,174 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,846,174
• Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentable
  PTAB · Jan 7, 2026 · PGR2024-00043 · APJ Ryan H Flax · PGR · Final written decision

  Claims 1–39 are unpatentable under Grounds 1–10; Petitioner did not prove lack of enablement under Ground 11, and Patent Owner’s motion to exclude was denied.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “REAL PARTIES-IN-INTEREST Petitioner identifies Avation Medical, Inc. as the real party-in-interest. Pet. x. Patent Owner identifies EMKinetics, Inc. as the real party-in-interest. Paper 5, 1; Paper 6, 1. Neither party contests the other’s assertions on this. C.” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A POSA at the time of the claimed invention would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices. Additional work experience could substitute for a formal degree and vice versa. Ex.1003, ¶21. Pet. 20 (citing Ex. 1003). Patent Owner does not contest this proposed definition or offer an alternative. See generally Resp. We accept and use Petitioner’s uncontested definition of the ordinarily skilled artisan, which appears to comport with the level of skill in the art reflected in the prior art of record and the ’943 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may]” slip op. at 19

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.200(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner states that, “no terms require construction for purposes of this Petition.” Pet. 21. Patent Owner presents no express position on claim construction. See generally Resp. We do not expressly construe any claim terms. E.” slip op. at 20

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner

    “question, based on factual findings. VidStream, 981 F.3d at 1063–64. Moreover, public accessibility is the touchstone in determining whether a reference is a printed publication and such depends on whether the reference was available to interested, ordinarily skilled persons exercising reasonable diligence, which is determined on a case-by-case basis. Id. at 1065. Particularly pertinent here is that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” Id. Hulu (which cites VidStream on this issue) concerned, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. Hulu, 2021 WL 487622. Hulu holds that, although testimonial evidence is one way to prove public accessibility, there are also a variety of hallmarks of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at *10–13, 21. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established, and whether the reference’s “purpose of publishing . . . was ‘dialogue with an intended audience.’” Id. at *10–21 (citing Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)).” slip op. at 30

  Patent outcomesUS 11,844,943 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 11,844,943
• Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentable
  PTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable

    “1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable

    “2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50

  Patent outcomesUS 9,139,993 mixed
  § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 9,139,993
• Straumann USA, LLC v. Smart Denture Conversions, LLCInstituted
  PTAB · Dec 10, 2025 · PGR2025-00054 · APJ Ryan H Flax · PGR · Institution

  The Board instituted PGR on claims 1–16 on all four grounds, finding at least one claim more likely than not unpatentable based on obviousness, indefiniteness, or lack of written description.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institute trial in a post-grant review. We institute a post-grant review only if the information presented in the petition filed under 35 U.S.C. § 321, if unrebutted, shows that it is more likely than not that at least one claim challenged in the petition is unpatentable. 35 U.S.C. § 324. On the existing record, we conclude that Petitioner demonstrates it is more likely than not that Petitioner would prevail in showing that at least one challenged claim of the ’781 patent is unpatentable under a presented ground. See generally Pet. Therefore, we grant institution of post-grant review. Our reasoning is discussed below.” slip op. at 2

  • PTAB / AIA Trials › Real party in interest / privityDecided for petitioner

    “STANDING Petitioner states that it certifies that: (1) the ’781 patent is available for post grant review because its earliest claimed effective filing date is October 9, 2018, and the patent issued less than nine months ago, on December 3, 2024; and (2) Petitioner is not barred or estopped from requesting a post grant review on the grounds in this petition. Pet. 5. This is sufficient. See 35 U.S.C. § 100(note)(A)–(B), § 321; 37 C.F.R. § 42.204(a). Patent Owner does not contest standing. See generally Prelim. Resp. B. REAL PARTIES-IN-INTEREST Petitioner states that “[t]he real parties-in-interest are Petitioner Straumann USA, LLC and its affiliates Institut Straumann AG and JJGC Indústria e Comércio de Materiais Dentários S.A.” Pet. 3. Patent Owner raises no objection and itself identifies “Smart Denture Conversions, LLC is the real party-in-interest.” Paper 4, 2; see generally Prelim. Resp. C.” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 42. And, as set forth above, Patent Owner asserts that, for the sake of its present arguments, it matters not which of the two proposed definitions we use for this proceeding. Prelim. Resp. 21. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’781 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This issue may be further developed at trial by the parties, if desired. C.” slip op. at 19

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “same claim construction standard that is used to construe patent claims in a civil action in federal district court thus, by default, we give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” 37 C.F.R. § 42.200(b); Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner indicates that None of the claim terms of claims 1–16 need to be construed to determine the patentability issues presented in this petition. The petition applies the ordinary meaning of the claim language as it would be understood by a POSA after reading the ’781 patent. Ex. 1002, ¶130. Petitioner will propose a construction if Patent Owner argues or the Board determines that one is required for any term. Pet. 31 (citing Ex. 1002). And, Patent Owner presents no express position on claim construction at this point. See generally Prelim. Resp. At this stage of the proceeding, we do not expressly construe any claim terms; however, this position is preliminary and we may change it based on the fully developed record at trial.8 D.” slip op. at 19

  Claim construction§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 12,156,781

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.