• Yantai Jereh Petroleum Equipment & Technologies Co., Ltd v. BJ Energy Solutions, LLCNo claims unpatentable
  PTAB · Feb 6, 2023 · PGR2021-00103 · APJ Patrick R Scanlon · PGR · Final written decision

  Claims 1–28 were not shown unpatentable on any asserted ground; the Board found the prior art failed to establish key limitations and rejected the enablement and indefiniteness challenges.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In reply, Petitioner argues that the ’764 patent’s control system is not complex as there are no detailed algorithms, logic, or software. Pet. Reply 4. Instead, the control system merely raises or lowers power of the pumps in accordance with the demand HHP of the job design. Id. (citing Ex. 1036, 97:15–98:18, 98:21–99:25, 100:1–101:25, 102:2–7, 115:4–9, 115:24–116:4, 116:17–22; Ex. 1001, 5:2–6, 6:36–7:7, 10:4–64). According to Petitioner, this “rudimentary control concept” does not necessitate the higher skill level proposed by Patent Owner. Id. Petitioner further notes that Dr. Adnan testifies that “a mechanical engineer who has worked in the industry developing programming and control systems could fall within this definition,” and the person of ordinary skill in the art “is ‘just a specifier.’” Id. (quoting Ex. 2003 ¶ 22; Ex. 1036, 161:21–164:18). Based on our review of the record before us, particularly the ’764 patent’s description and Dr. Adnan’s testimony, we agree with Petitioner that the ordinary level of skill in the art does not require the high level of specialized knowledge of control systems suggested by Patent Owner. Moreover, we find that Petitioner’s stated level of ordinary skill in the art is reasonable because it is consistent with the evidence of record, including the asserted prior art. Accordingly, for the purposes of this Decision, we apply Petitioner’s definition, although our conclusions with respect to obviousness would be the same if we were to apply Patent Owner’s definition.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “Based on the full record, we are not persuaded that Mr. Marscher is unqualified to serve as an expert in this proceeding. As noted above, a person of ordinary skill in the art is not required to have been a fracturing operator. Patent Owner’s proposed definition does not even require experience as a fracturing operator. See PO Resp. 20–21. Furthermore, Mr. Marscher testifies that he has extensive experience developing pumps for fracturing applications. Ex. 2027, 6:24–8:7. Mr. Marscher also testifies that he has experience with control systems relating to pumps and pumps units. Id. at 212:19–23. This testimony, as well as his declaration and curriculum vitae, show that Mr. Marscher has extensive education and experience in relevant fields. Ex. 1003 ¶¶ 8–17; Ex. 1004. Accordingly, we are not persuaded that Mr. Marscher’s qualifications or experience provide reason to discount the weight associated with Mr. Marscher’s testimony.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “In its Reply, Petitioner argues that the maximum power output value is the pump unit’s highest HHP output and one of ordinary skill in the art would have understood this value is the pump unit’s output power in intermittent duty. Pet. Reply 2–3 (citing Ex. 1003 ¶¶ 71–72, 123–124; Pet. 9–10; Ex. 1036, 64:17–67:13, 119:17–120:11, 124:7–24, 198:9–200:9, 221:8–222:15). However, even if Petitioner is correct that the “maximum power output value” is near or equivalent to a pump unit’s output power in intermittent duty, we are still not persuaded that the term “maximum intermittent power” should be tied to the “maximum power output value,” in conflict with the definition provided in the Specification. Petitioner also argues that Patent Owner’s proposed construction is indefinite. Pet. Reply 3. For the reasons discussed below (see supra § II.I.1), we determine that Petitioner has not shown by a preponderance of the evidence that the term “maximum intermittent power,” as defined in the Specification, is indefinite. Thus, based on the complete record before us, we maintain our prior construction of “maximum intermittent power” for this Final Written Decision.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “3. Additional Terms We determine that we need not expressly construe any other claim terms to resolve the parties’ disputes because doing so would have no effect on the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 13

  Patent outcomesUS 10,815,764 not shown unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,815,764
• Shenzhen Buxiang Network Technology Co., Ltd. v. Sun Pleasure Co. LimitedNo claims unpatentable
  PTAB · Apr 11, 2022 · IPR2021-00080 · APJ Patrick R Scanlon · IPR · Final written decision

  Claims 1–9 were not shown unpatentable because Metzger lacked the claimed fluid passage, and Wu was not prior art based on the claims’ earlier reduction to practice.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Relying on the testimony of Mr. Kuchel, Petitioner submits that a person of ordinary skill in the art “would have either (i) a bachelor’s degree in mechanical engineering, or an equivalent field, or (ii) would have an associate degree in mechanical engineering, or an equivalent field, and two years of practical experience in inflatable product design.” Pet. 16 (citing Ex. 1002 ¶ 26). In the Decision on Institution, we adopted Petitioner’s proposed level of ordinary skill in the art, stating it was “consistent with the evidence of record, including the asserted prior art.” Dec. Inst. 9. In its Response, Patent Owner makes arguments that rely on Petitioner’s proposed level of ordinary skill in the art, but does not dispute Petitioner’s definition. See PO Resp. 35, 39–53 (citing Ex. 2014 ¶ 66). Based on our review of the complete record, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner proposes claim constructions for the terms “substantially below” and “substantially inwardly” recited in claims 1 and 6. Pet. 40–41. In the Decision on Institution, we determined that it was not necessary to construe the terms at that stage of the proceeding. Dec. Inst. 9–10 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017)). Patent Owner contends “the claim terms ‘substantially below’ and ‘substantially inwardly’ are sufficiently clear on their face to preclude any need for claim construction,” but proposes claim constructions that differ somewhat from Petitioner’s proposed constructions in the event the Board determines that these terms require claim construction. PO Resp. 13, 15–16. Patent Owner also proposes a claim construction for the term “upper tubular periphery” recited in claims 1 and 6 that Petitioner opposes. Id. at 17–19; Pet. Reply 7–10. Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. Nidec, 868 F.3d at 1017. Because the outcome of our decision does not depend on either parties’ construction of the terms “substantially below,” “substantially inwardly,” or “upper tubular periphery,” we need not construe these terms to resolve the issues in dispute in this proceeding.” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Metzger’s gaps define fluid passages located between adjacent side support beams 25 (i.e., “internal walls”) and are not formed in any of the side support beams. We are not directed to any written description in Metzger indicating that the gaps are formed in a side support beam.7 Instead, Figures 5 and 6 of Metzger depict the gaps as being defined between four distinct side support beams 25. Furthermore, as Patent Owner points out, Mr. Kuchel appears to agree that there are no passages formed through the side support beams 25 of Figures 5 and 6. Ex. 2003, 107:12–108:9, 108:17–108:21. For these reasons, we determine that Metzger’s gaps are not formed through an internal wall, as required by claim 1. In the Reply, Petitioner asserts that, even if Metzger discloses four discrete, spaced-apart beams or walls, “the gaps or slices between walls are apertures in a structure through which air can pass.” Pet. Reply 15 (emphasis added). This argument is not persuasive because claim 1 recites that the fluid passage is formed through the internal wall (which Petitioner asserts is met by Metzger’s side support beam 25), not just any structure. Petitioner’s general assertion that air passes through “a structure” fails to establish that the gaps are formed in a side support beam.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Specifically, Petitioner argues that one of ordinary skill in the art would have understood from Metzger “that an air passage would be necessary to bypass the side support beam 25 and inflate the upper tubular periphery for the air mattress to function as intended.” Id. (citing Ex. 1002 ¶ 200). According to Petitioner, because Metzger discloses only a single air inlet valve, an ordinarily skilled artisan would have understood that providing openings, or fluid passages, through the side support beam 25, in lieu of or in addition to the gaps between the side support beam 25, would have been a simple solution to adequately inflate the peripheral frame of the mattress defined by the side support beam(s) 25. Id. at 74–75 (citing Ex. 1002 ¶ 200). Petitioner thus presents two alternate theories for modifying Metzger: (1) providing fluid passages in at least one side support beam 25 in addition to the gaps, and (2) providing fluid passages in lieu of the gaps. In support of the first theory, Petitioner only argues that providing fluid passages in the side support beams, in addition to the gaps between the ends of the side support beams, would have allowed the peripheral frame to inflate more freely. Id. at 75 (citing Ex. 1002 ¶ 201). In its Response, Patent Owner contends that “Petitioner is just wrong.” PO Resp. 45 (citing Ex. 2001 ¶¶ 146–149). Dr. Letton testifies that pumps used to inflate air mattresses are low flow and low pressure and generally inflate an air mattress to a maximum pressure of around 1 psi. Ex. 2001 ¶ 147. Dr. Letton further testifies that, with Metzger’s design, the” slip op. at 28

  Patent outcomesUS 7,353,555 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,353,555
• Haag-Streit AG v. Eidolon Optical, LLCNo claims unpatentable
  PTAB · Dec 19, 2019 · IPR2018-01311 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 5, 6, 8–10, 14–16, and 19 were not shown unpatentable because the cited references did not disclose an LED itself generating blue light energy.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Decision on Institution, we adopted Petitioner’s proposed level of ordinary skill in the art, stating that it “appear[ed] consistent with the record at th[at] stage of the proceeding.” Dec. Inst. 6. Patent Owner does not address or dispute Petitioner’s proposed definition of the level of ordinary skill in the art. See generally PO Resp.; Sur-reply. Petitioner did not further address this issue in the Reply. See generally Pet. Reply. We continue to apply Petitioner’s proposed level of ordinary skill in the art in the analysis below.” slip op. at 7

  • ExcludeOther

    “As discussed above (see supra § II.C.3.a), to resolve the dispute between the parties here, we need not make a determination one way or the other regarding Patent Owner’s assertion as to the specific amount of power necessary to cause sodium fluorescein to fluoresce. Instead, the outcome here follows from the determination that Petitioner (who has the overall burden of persuasion as to unpatentability) has not persuasively established the existence, as of February 5, 1992, of a blue LED having sufficient power output to cause sodium fluorescein to fluoresce. Accordingly, we dismiss Petitioner’s motion as to Exhibit 2014 as moot because we need not rely on that exhibit (or the specific statement highlighted by Petitioner) in this Decision. See TPG 79–80.” slip op. at 43

  • Strike new argumentNew argument disregardedDecided for patent owner

    “commercially available by CREE, Inc. in 1992” and asserts that “Patent Owner’s arguments are wrong in that blue LEDs having sufficient output power to cause sodium fluorescein to fluoresce existed in 1992 at the time of Longobardi.” Pet. Reply 28, 32. When asked, during the oral hearing, for evidentiary support for these statements, Petitioner attempted to rely on Exhibit 2024. See Tr. 13:14–14:18 (counsel for Petitioner generally discussing Exhibit 2024 as potential support). That exhibit, however, was not discussed or relied on in either of Petitioner’s briefs. Id. at 38:22–39:20 (counsel for Petitioner discussing Exhibit 2024, but also acknowledging that it was not cited in either brief). We will not further consider Petitioner’s untimely argument as to Exhibit 2024. See Dell Inc. v. Acceleron, LLC, 884 F.3d 1364, 1369 (Fed. Cir. 2018) (noting that the “Board was obligated to dismiss [the petitioner’s] untimely argument . . . raised for the first time during oral argument”); Patent Trial and Appeal Board Consolidated Trial Practice Guide (“TPG”) 85–86 (Nov. 2019) (discussing how, at the oral hearing, a party “may only present arguments relied upon in the papers previously submitted”), available at https://www.uspto.gov/sites/default/ files/documents/tpgnov.pdf. Petitioner did not identify any other record support for the two assertions as to the alleged state of the art in 1992.” slip op. at 30

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “one of ordinary skill in the art would have understood Longobardi as implicitly disclosing the presence of a blue LED is that, as argued by Patent Owner, none of the declaration testimony of Dr. Jiao supports that position. See PO Sur-reply 5 (“Petitioner lacks evidence that Longobardi implicitly or inherently teaches an LED sufficient to generate blue light energy itself as required by claim 1. Petitioner’s expert does not testify as to this fact.” (emphasis added)), 7 (“Petitioner fails to provide any expert testimony . . . that Longobardi teaches a blue light energy created by the LED.”). Indeed, in the entire section of the Reply Brief discussing why Longobardi allegedly implicitly discloses a blue LED, Petitioner never cites to Dr. Jiao’s testimony as evidence of how one of ordinary skill in the art would have understood the highlighted passages. See Pet. Reply 18–22; see also PO Sur-reply 14 (“Petitioner’s attorney arguments that Longobardi implicitly discloses the limitation of at least one LED sufficient to generate blue light energy itself as required by claim 1 are unreasonable.”). “Attorney argument is not evidence.” Icon Health & Fitness, Inc. v. Strava, Inc., 849 F.3d 1034, 1043 (Fed. Cir. 2017); see also Elbit Sys. of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1359 (Fed. Cir. 2018) (citing this aspect of Icon Health in the context of an appeal from an inter partes review). In addition, the testimony in Dr. Jiao’s Reply Declaration that is cited in Petitioner’s Reply (in the part discussing the state of the art of blue LEDs “[i]n 1992” (Pet. Reply 26)) does not actually support Petitioner on the ultimate factual issue here. See Pet. Reply 26–32 (citing Jiao Reply. Decl. ¶¶ 11–21). Instead, most of Dr. Jiao’s testimony in these paragraphs summarizes and addresses Dr. Lebby’s position on the 1-milliwatt issue (discussing Exhibits 1021 and 1022). See Jiao Reply Decl. ¶¶ 11–20. After that discussion, Dr. Jiao concludes with a paragraph taking the position that one of ordinary skill in the art “at the time of the invention would have found that Longobardi teaches and suggests the use of a blue LED having sufficient power to cause sodium fluorescein to fluoresce.” Id. ¶ 21. None of Dr. Jiao’s testimony, however, actually addresses the state of the art of blue LEDs in 1992, which, as acknowledged by Petitioner, is the relevant point in time to assess the alleged implicit disclosures in Longobardi.” slip op. at 27

  Patent outcomesUS 6,547,394 not shown unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 6,547,394
• St. Jude Medical, LLC v. Snyders Heart Valve LLCNo claims unpatentable
  PTAB · May 2, 2019 · IPR2018-00109 · APJ Mitchell G Weatherly · IPR · Final written decision

  Claims 18 and 20 were not shown unpatentable because Leonhardt did not disclose the claimed central frame structure and the proposed Leonhardt-Johnson combination lacked adequate motivation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Factual indicators of the level of ordinary skill in the art include “the various prior art approaches employed, the types of problems encountered in the art, the rapidity with which innovations are made, the sophistication of the technology involved, and the educational background of those actively working in the field.” Jacobson Bros., Inc. v. U.S., 512 F.2d 1065, 1071 (Ct. Cl. 1975); see also Orthopedic Equip. Co. v. U.S., 702 F.2d 1005, 1011 (Fed. Cir. 1983) (quoting with approval Jacobson Bros.). We find, based on our review of the record before us, that Petitioner’s stated level of ordinary skill in the art is reasonable because it is consistent with the record, including the asserted prior art and, for the purposes of this Final Written Decision, we adopt Petitioner’s definition.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “written decision is issued shall be given its broadest reasonable construction in light of the specification of the patent in which it appears.” 37 C.F.R. § 42.100(b) (2018); see also Cuozzo Speed Techs., LLC v. Lee, 136 S.Ct. 2131, 2144–46 (2016) (affirming that USPTO has statutory authority to construe claims according to Rule 42.100(b)). When applying that standard, we interpret the claim language as it would be understood by one of ordinary skill in the art in light of the specification, and absent any special definition, we give claim terms their ordinary and customary meaning. See In re Suitco Surface, Inc., 603 F.3d 1255, 1260 (Fed. Cir. 2010); In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007) (“The ordinary and customary meaning is the meaning that the term would have to a person of ordinary skill in the art in question.” (internal quotation marks omitted)). Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999). Claim 1 recites that the flexible valve element is attached to the “central portion of the frame.” Patent Owner argues that “central portion of the frame” means “central structural frame portion,” which cannot refer solely to an “empty space.” PO Resp. 3–7. Patent Owner explains that, during the related litigation, Petitioner agreed that the central portion of the frame must “actually be part of the structure of the frame.” Id. at 6 (quoting Ex. 2001, 119–20). Accordingly, we discern no dispute on the issue of whether “central portion of the frame” refers to a structural portion of the frame; it does.” slip op. at 10

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Petitioner’s argument that Leonhardt’s valve is attached to the central part of the frame of claim 1 fails. Leonhardt’s valve is undeniably attached to its frame because the valve is sutured or glued to stent 26. Claim 1 requires the valve element to be attached to a portion of the frame located along the radial centerline. Ex. 1001, 19:19–20. However, Leonhardt’s frame (stent 26 coupled via connecting bar 29) is a hollow cylinder devoid of structure located along its centerline. Ex. 1017, Figure 1C. Thus, regardless of how Leonhardt’s valve is attached to stent 26 and connecting bar 29, it is not attached to a structure “located along a centerline” as recited in claim 1 and thus claims 18 and 20. Therefore, we determine that Petitioner fails to establish by a preponderance of evidence that Leonhardt anticipates claims 18 and 20. 4. Summary For the reasons expressed above, we determine that Petitioner has failed to prove by a preponderance of evidence that Leonhardt anticipates claims 18 and 20.” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “F. CLAIMS 18 AND 20: OBVIOUSNESS BY LEONHARDT Petitioner argues that even if Leonhardt fails to describe elements as claimed, an ordinarily skilled artisan would consider that “variations” of Leonhardt to meet the claimed limitations would have been obvious “in view of the general knowledge in the art and the limited number of ways of using known elements to achieve expected results.” Pet. 42. Petitioner also argues that “[a]s these are method claims, and not device claims, even if the valve device were somehow unobviously different, which it is not, that difference should be given minimal weight in evaluating the obviousness of the method.” Id. at 44. Petitioner cites no authority for this proposition, and we are aware of none. Claims 18 and 20 are directed to a “transluminal method of inserting an artificial valve as set forth in claim 1.” Id. at 21:1–25 (claim 18), 21:31– 50 (claim 20). Each time claims 18 and 20 refer to an “artificial valve” steps of the recited methods, they refer to the valve set forth in claim 1. None of Petitioner’s arguments persuasively addresses Leonhardt’s failure to describe a flexible valve element attached to a central portion of the frame located along a centerline. See Part II.E. Accordingly, we conclude that Petitioner has failed to prove by a preponderance of evidence that Leonhardt alone renders claims 18 and 20 unpatentable as obvious.” slip op. at 14

  Patent outcomesUS 6,821,297 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 6,821,297
• Samsung Electronics Co., Ltd. v. Infobridge Pte. Ltd.No claims unpatentable
  PTAB · Apr 23, 2018 · IPR2017-00100 · APJ John P Pinkerton · IPR · Final written decision

  Claims 8 and 9 were not proven unpatentable because Samsung did not establish that WD4 was a prior art printed publication.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “Because there are many ways in which a reference may be disseminated to the interested public, ‘public accessibility’ has been called the touchstone in determining whether a reference constitutes a ‘printed publication’ bar under 35 U.S.C. § 102(b).” In re Hall, 781 F.2d 897, 898–99 (Fed. Cir. 1986) (citations omitted). Whether a reference is publicly accessible is determined on a case-by-case basis based on the “facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004) (citations omitted). A reference will be considered publicly accessible if it was “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence, can locate it.” Kyocera Wireless Corp. v. Int’l Trade Comm’n, 545 F.3d 1340, 1350 (Fed. Cir. 2008) (citations omitted) (GSM standard was “sufficiently accessible, at least to the public interested in the art” (citing In re Hall, 781 F. 2d at 899)). Just as indexing plays a significant role in evaluating whether a reference in a library is publicly accessible, “indexing, ‘[w]hether . . . through search engines or otherwise,’ [] is also an important question for determining if a reference stored on a given website in cyberspace is publicly accessible.” Blue Calypso LLC v. Groupon Inc., 815 F.3d 1331, 1349 (Fed. Cir. 2016) (citing Voter Verified, Inc. v. Premier Election Sols., Inc., 698 F.3d 1374, 1381 (Fed. Cir. 2012)). “[A] printed publication need not be easily searchable after publication if it was sufficiently disseminated at the time of its publication.” Suffolk Technologies, LLC v. AOL Inc., 752 F.3d 1358, 1365 (Fed. Cir. 2014). Whether a reference qualifies as a printed publication is a legal conclusion based on underlying factual determinations. In re Lister, 583 F.3d 1307, 1311 (Fed. Cir. 2009). slip op. at 13

  Patent outcomesUS 8,917,772 not shown unpatentable
  § 102 anticipation
  Patents in suitUS 8,917,772
• Samsung Electronics Co., Ltd. v. Infobridge Pte. Ltd.No claims unpatentable
  PTAB · Apr 23, 2018 · IPR2017-00099 · APJ John P Pinkerton · IPR · Final written decision

  Claims 1–7 were not proven unpatentable because Samsung did not establish that WD4 was a prior art printed publication under § 102(b).

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “evidence does not establish WD4 was indexed in a manner that one ordinarily skilled in the art, exercising reasonable diligence, could locate it. See Response 45. There is no evidence that the JCT-VC site provided users sufficient guidance on finding documents of interest. Importantly, there is no evidence that one could search for or locate WD4 based on its subject matter. Although the Torino document register contains the number, title, and source (i.e, authors’ names) of each document, the subject of the document is not listed or identified. See In re Cronyn, 890 F.2d 1158, 1160– 61 (Fed. Cir. 1989) (finding references were not publicly accessible, despite the use of indexing, because the references were indexed only by title and author’s name, rather than by subject). Furthermore, identifying a meeting location was key to navigating the JCT-VC site; however, there is no evidence showing that persons of skill in the art outside of JCT-VC would have had any knowledge or familiarity with the cities in which the JCT-VC meetings were conducted or that the names of the cities were helpful in any respect in locating a document on the site. For these reasons, the evidence does not support the conclusion by a preponderance of the evidence that persons interested and ordinarily skilled in the art at the time of the invention would have been aware of the JCT-VC document repository site, or that, if they were aware of the site, would have been able to locate the WD4 document relied upon by Samsung.” slip op. at 19

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Mr. Bross’s testimony is conclusory and insufficiently factually supported. We understand Mr. Bross to be testifying in this regard as a fact witness pursuant to Federal Rule of Evidence 602, rather than as an expert witness pursuant to Federal Rule of Evidence 702. Under Rule 602, a fact witness may testify as to a matter only if “evidence is introduced sufficient to support a finding that the witness has personal knowledge of the matter.” Fed. R. Evid. 602. Here, Mr. Bross’s testimony is based on his “knowledge and recollection” and “the prominence of the JCT-VC” in the video coding industry. However, the particular factual knowledge on which the testimony is based is not described. Similarly, the “prominence” of the JCT-VC is nothing more than an unsupported assumption. We also find Mr. Bross has not been shown to have the requisite personal knowledge to testify about persons “who would regularly visit the JCT-VC site.” Even if we accepted Mr. Bross’s premise of the “prominence of the JCT-VC,” we would not find that to be a sufficient basis for Mr. Bross to reliably testify about persons “regularly visit[ing]” the JCT-VC site.” slip op. at 16

  Patent outcomesUS 8,917,772 not shown unpatentable
  § 102 anticipation
  Patents in suitUS 8,917,772
• Palo Alto Networks, Inc. / Blue Coat Systems, Inc. v. Finjan, Inc.No claims unpatentable
  PTAB · Mar 16, 2017 · IPR2016-00480 · APJ Miriam L Quinn · IPR · Final written decision

  Claims 14 and 19 were not shown unpatentable because neither Shin nor Poison Java and Brown teaches executable code received at the destination without modification.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “according to the entire disclosure of the ’633 patent specification the executable code is received at the destination without modification. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (the specification is “the single best guide to the meaning of a disputed term,” and “acts as a dictionary when it expressly defines terms used in the claims or when it defines terms by implication.”). “The specification may define claim terms ‘by implication’ such that the meaning may be ‘found in or ascertained by a reading of the patent documents.’” Bell Atl. Network Servs., Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed.Cir.2001) (quoting Vitronics, 90 F.3d at 1582, 1584 n. 6). We also confirm the scope of the “executable code” in light of the advantage of the invention, e.g., to protect against malicious code without modifying the executable code, thereby minimizing resources. See Toro Co. v. White Consol. Indus., Inc., 199 F.3d 1295, 1301 (Fed. Cir. 1999) (construing a ring as permanently attached to the cover because all embodiments read together suggest this relationship and the specification describes the advantages of the unitary structure). Although the specification describes additional advantages, such as not requiring pre-installation of security code within the destination, the claims need not encompass all stated advantages. See Golight, Inc. v. Wal-Mart Stores, Inc., 355 F.3d 1327, 1331 (Fed. Cir. 2004) (“[P]atentees [are] not required to include within each of their claims all of [the] advantages or features described as significant or important in the written description.”). Finally, all the embodiments are consistent with and support the inventors’ characterization of the problem solved: avoiding the resource intensive modification by communicating to the destination the mobile protection code and the detected executable code. See Ex. 1001, 10:39−45; 1:63−3:6; see also O.I. Corp. v. Tekmar Co., 115 F.3d 1576, 1581 (Fed. Cir. 1997) (relying on the consistent disclosure of structures as being either non-smooth or conical and the statements distinguishing prior art where structures were smooth). In light of the disclosure, the plain and ordinary meaning of the disputed claim language emerges: the executable code whose operations are processed by the mobile protection code at the destination is the same as the executable code received, i.e., it undergoes no modification. In sum, we determine that the “executable code” at the destination is not modified.” slip op. at 17

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “research at Stanford, and archived by archive.org, shows that the article’s title was listed and that the article was publicly available through the Internet as of April 14, 1998. Ex. 1095. As explained in the affidavit proffered by Christopher Butler, Office Manager of Internet Archive, the URL format for captured website, “19980418130342/http://www-cs-students.stanford.edu/~ishin/research.html,” establishes that the website posting the abstract and the title of the article with a link to the article itself were archived on April 18, 1998 at 13:03:42. Id. The article was available as a PDF file, downloadable from the same page. Id. (identifying in a cover page the URL showing that Ex. 1009 was available from www-cs-students.stanford.edu/~ishin/paper.ps, as of April 18, 1998). We find this evidence credible and undisputed. Finally, there is also undisputed evidence that Dr. Rubin read Shin in 1998. Ex. 2022, 70:20−71:13. Accordingly, we find that Shin was publicly available and sufficiently accessible online to persons interested in applet security no later than April 14, 1998.” slip op. at 19

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We find that Shin’s constant pool is not the same as the IAT embodiment described in the ’633 patent. As stated above, the mobile protection code modifies the IAT at the destination while processing the one or more operations of the executable code. In contrast, Shin’s applet is modified at the proxy server, and its modification constitutes rewriting the bytecode of the applet, which is executable. See Ex. 1009, 2 (“we propose a technique, called bytecode modification, through which we put restrictions on applets by inserting additional bytecode instructions that will perform the necessary run-time tests”), 4 (“modified executable entities are inserted in Java bytecode”). As explained by Shin, the constant pool is part of the class file of the applet. Id. at 5. Further, the bytecode modification is not performed at run-time, like the IAT modification table scenario. See id. at 2 (“HTTP proxy server []modifies classes before they are received by the browser”), 4 (Shin explaining that the “safety mechanism must be applied before the applet is executed”). The differences are significant, for the modification of the applet at the server is precisely the type of modification that the ’633 patent sought to avoid. The applet is undisputedly executable code, and is what Petitioner pointed to in Shin as disclosing executable code. See Pet. 43 (“Shin also discloses that the safeguarding code processes operations attempted by the applet (‘executable code’) . . . .”). By describing that the server modifies the constant pool in the applet, we find that Shin teaches modifying the executable code before the applet is processed at the client browser. Therefore, Petitioner has failed to show by a preponderance of the evidence that Shin teaches or suggests that the applet is “executable code” as we have construed the claim language, supra.” slip op. at 26

  • ExcludeMotion to exclude, deniedDenied

    “and 2048 in general as irrelevant, potentially confusing, and prejudicial. Id. at 8−15. Petitioner’s Motion to Exclude is denied as moot, because that evidence objected to is not relied upon in reaching our determination that Petitioner has not met its burden of showing that claims 14 and 19 are unpatentable.” slip op. at 34

  Patent outcomesUS 7,647,633 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,647,633
• Palo Alto Networks, Inc. v. Finjan, Inc.No claims unpatentable
  PTAB · Mar 16, 2017 · IPR2015-01974 · APJ Miriam L Quinn · IPR · Final written decision

  Claims 14 and 19 were not shown unpatentable under either § 103 ground because both relied on modified executable code, contrary to the Board’s construction.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “To conclude, our determination is based on the plain and ordinary meaning of the claims within the context of the specification. First, 7 Similarly, Petitioner relies on testimony from the deposition of Finjan’s expert in the District Court litigation, Dr. Nenad Medvidovic, Exhibit 1100. Reply 5 (citing Ex. 1100). 8 We do not rely on expert testimony also because extrinsic evidence may not be used to contradict claim meaning that is unambiguous in light of the intrinsic record. Summit 6, LLC v. Samsung Elecs. Co., 802 F.3d 1283, 1290 (Fed. Cir. 2015). according to the entire disclosure of the ’633 patent specification the executable code is received at the destination without modification. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (the specification is “the single best guide to the meaning of a disputed term,” and “acts as a dictionary when it expressly defines terms used in the claims or when it defines terms by implication.”). “The specification may define claim terms ‘by implication’ such that the meaning may be ‘found in or ascertained by a reading of the patent documents.’” Bell Atl. Network Servs., Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed.Cir.2001) (quoting Vitronics, 90 F.3d at 1582, 1584 n. 6). We also confirm the scope of the “executable code” in light of the advantage of the invention, e.g., to protect against malicious code without modifying the executable code, thereby minimizing resources. See Toro Co. v. White Consol. Indus., Inc., 199 F.3d 1295, 1301 (Fed. Cir. 1999) (construing a ring as permanently attached to the cover because all embodiments read together suggest this relationship and the specification describes the advantages of the unitary structure). Although the specification describes additional advantages, such as not requiring pre-installation of security code within the destination, the claims need not encompass all stated advantages. See Golight, Inc. v. Wal-Mart Stores, Inc., 355 F.3d 1327, 1331 (Fed. Cir. 2004) (“[P]atentees [are] not required to include within each of their claims all of [the] advantages or features described as significant or important in the written description.”). Finally, all the embodiments are consistent with and support the inventors’ characterization of the problem solved: avoiding the resource intensive modification by communicating to the destination the mobile protection code and the detected executable code. See Ex. 1001, 10:39−45; 1:63−3:6; see also O.I. Corp. v. Tekmar Co., 115 F.3d 1576, 1581 (Fed. Cir. 1997) (relying on the consistent disclosure of structures as being either non-smooth or conical and the statements distinguishing prior art where structures were smooth). In light of the disclosure, the plain and ordinary meaning of the disputed claim language emerges: the executable code whose operations are processed by the mobile protection code at the destination is the same as the executable code received, i.e., it undergoes no modification. In sum, we determine that the “executable code” at the destination is not modified.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “publication or dissemination. See Ex. 1009. Petitioner, however, has provided other evidence establishing that Shin was publicly available no later than April 1998. A printout of the website directed to Mr. Shin’s research at Stanford, and archived by archive.org, shows that the article’s title was listed and that the article was publicly available through the Internet as of April 14, 1998. Ex. 1095. As explained in the affidavit proffered by Christopher Butler, Office Manager of Internet Archive, the URL format for captured website, “19980418130342/http://www-cs-students.stanford.edu/~ishin/research.html,” establishes that the website posting the abstract and the title of the article with a link to the article itself were archived on April 18, 1998 at 13:03:42. Id. The article was available as a PDF file, downloadable from the same page. Id. (identifying in a cover page the URL showing that Ex. 1009 was available from www-cs-students.stanford.edu/~ishin/paper.ps, as of April 18, 1998). We find this evidence credible and undisputed. Finally, there is also undisputed evidence that Dr. Rubin read Shin in 1998. Ex. 2022, 70:20−71:13. Accordingly, we find that Shin was publicly available and sufficiently accessible online to persons interested in applet security no later than April 14, 1998.” slip op. at 18

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We find that Shin’s constant pool is not the same as the IAT embodiment described in the ’633 patent. As stated above, the mobile protection code modifies the IAT at the destination while processing the one or more operations of the executable code. In contrast, Shin’s applet is modified at the proxy server, and its modification constitutes rewriting the bytecode of the applet, which is executable. See Ex. 1009, 2 (“we propose a technique, called bytecode modification, through which we put restrictions on applets by inserting additional bytecode instructions that will perform the necessary run-time tests”), 4 (“modified executable entities are inserted in Java bytecode”). As explained by Shin, the constant pool is part of the class file of the applet. Id. at 5. Further, the bytecode modification is not performed at run-time, like the IAT modification table scenario. See id. at 2 (“HTTP proxy server []modifies classes before they are received by the browser”), 4 (Shin explaining that the “safety mechanism must be applied before the applet is executed”). The differences are significant, for the modification of the applet at the server is precisely the type of modification that the ’633 patent sought to avoid. The applet is undisputedly executable code, and is what Petitioner pointed to in Shin as disclosing executable code. See Pet. 43 (“Shin also discloses that the safeguarding code processes operations attempted by the applet (‘executable code’) . . . .”). By describing that the server modifies the constant pool in the applet, we find that Shin teaches modifying the executable code before the applet is processed at the client browser. Therefore, Petitioner has failed to show by a preponderance of the evidence that Shin teaches or suggests that the applet is “executable code” as we have construed the claim language, supra.” slip op. at 26

  • ExcludeMotion to exclude, deniedDenied

    “and 2048 in general as irrelevant, potentially confusing, and prejudicial. Id. at 8−15. Petitioner’s Motion to Exclude is denied as moot, because that evidence objected to is not relied upon in reaching our determination that Petitioner has not met its burden of showing that claims 14 and 19 are unpatentable.” slip op. at 34

  Patent outcomesUS 7,647,633 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,647,633
• Broad Ocean Technologies, LLC v. Nidec Motor CorporationNo claims unpatentable
  PTAB · Dec 21, 2016 · IPR2015-01617 · APJ Patrick M Boucher · IPR · Final written decision

  Claims 7–13 were not shown unpatentable because Beifus did not disclose the claimed torque table with alternate torque settings.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “Beifus states that Figure 6 “is a chart illustrating an induction motor speed-torque curve that is programmed into a memory of an ECM.” Ex. 1007 ¶ 11. Because “[a] claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference,” the dispositive issue in this proceeding is well defined: does Figure 6 (and related disclosure) of Beifus teach “selecting a torque table associated with the adjustment factor, the torque table including alternate torque settings,” as recited in independent claim 7? See Verdegaal Bros. v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987).” slip op. at 9

  • Strike new argumentNew argument disregardedDecided for patent owner

    “reasoning of Kennametal, Inc. v. Ingersoll Cutting Tool Co., 780 F.3d 1376 (Fed. Cir. 2015). Petitioner contends that “[u]pon reading Beifus, a person of ordinary skill would immediately recognize that the ECM control circuit could handle the torque values in two ways – storing a set of torque values in a memory or by calculating the torque values ‘on the fly.’” Reply 18. Kennametal explains that “a reference can anticipate a claim even if it ‘do[es] not expressly spell out’ all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would ‘at once envisage’ the claimed arrangement or combination.” Kennametal at 1381 (citing In re Petering, 301 F.2d 676, 681 (CCPA 1962)). Petitioner did not raise the Kennametal theory of anticipation in its Petition, and the argument based on it in the Reply is, therefore, improper. 37 C.F.R. § 42.23(b) (“A reply may only respond to arguments raised in the corresponding opposition, patent owner preliminary response, or patent owner response.”) (emphasis added); CBS Interactive, Inc. v. Helferich Pat. Lic., LLC, Case IPR2013-00033, slip op. at 3 (PTAB Aug. 9, 2013) (Paper 79) (“Should there be improper arguments or evidence presented with a reply, the Board, exercising its discretion, may exclude the reply and related evidence in their entirety, or alternatively, decline to consider the improper arguments and/or related evidence.”). Although Patent Owner addressed this theory in its Response (PO Resp. 21–24), Patent Owner appears to have done so only prophylactically after the theory was raised by Petitioner in redirect examination of Dr. Sidman. See PO Resp. 21 (“During Dr. Sidman’s redirect examination by [Petitioner’s] counsel, he was asked the following leading question . . . .”) (“The Board should disregard any of this new evidence and argument if [Petitioner] intends to rely on it.”). Because this is a new argument, not raised in the Petition, we do not consider it.” slip op. at 18

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “the ambiguity when Figure 6 is actually described in detail in the specification.” Id. at 16. As Patent Owner asserts, “Beifus makes it clear that Figure 6 is a plot of values derived from key characteristics which are motor parameters of the emulated motor.” Id. (citing Ex. 1007 ¶ 36; Ex. 2002 ¶¶ 15–16, 31). This understanding of Beifus is confirmed by testimony of Patent Owner’s expert, Mark N. Horenstein, Ph.D. Ex. 2002 ¶¶ 15–16. Dr. Horenstein explains that a person of ordinary skill in the art would understand that the parameters stored in the ECM are key parameters used with the formula reproduced above to describe the torque-speed curve of the induction motor being emulated, namely the no-load speed, breakdown speed, and shape description number n. Id. ¶ 15. Dr. Horenstein further testifies that, “although square and diamond symbols appear along the curves in Figure 6, nowhere does Beifus describe the storing of these individual points.” Id. ¶ 16. Rather, Dr. Horenstein expresses his opinion that “a person of skill would understand these symbols to be included simply to identify which curve applies to Option 1 and which to Option 2 [i.e., different options for the induction motor breakdown speed], as indicated by the legend to the right of the plots.” Id. Petitioner challenged Dr. Horenstein’s opinion at his deposition, in part by comparing a drawing from one of Dr. Horenstein’s own patents that included a series of curves with data marked by different symbols: Q. So if a person of ordinary skill in the art looking at Figure 6 of the Beifus patent sees diamonds and squares, wouldn’t they come to an understanding that those are data points? A. I don’t think so. And the reason is that a formula is given that explains how the curves are computed. Figure 19 of [Dr. Horenstein’s patent], those are discretely measured points performed by experiment, and there really is no formula that applies to those curves per se, they’re just data points that have some scatter relative to each other and they happen to be connected by lines, but those lines do not represent a formula. Ex. 1013, 54:2–16. We disagree with Petitioner’s characterization of this testimony as explaining that “the reason a person of ordinary skill in the art would understand that the diamonds and squares appearing in Figure 19 of [Dr. Horenstein’s] patent are data points, as opposed to mere curve identifiers, is because the diamonds and squares are connected by lines.” Reply 15. Rather, Dr. Horenstein’s testimony makes clear that his opinion is grounded in Beifus’s disclosure of a formula that allows calculation of the illustrated points and that connection of data points measured by experiment with lines is incidental. Dr. Horenstein’s testimony is more persuasive than the testimony of Petitioner’s expert, Michael D. Sidman, Ph.D., on the identification of “key characteristic points” disclosed by Beifus. For example, Dr. Sidman appeared to suggest at his deposition that the entire speed-torque curve of Beifus’s Figure 6 is itself a “key characteristic point,” but qualified that position when challenged by Patent Owner. See Ex. 2001, 23:22–25:15. Nevertheless, Dr. Sidman agrees that (1) a curve can be generated from a mathematical formula and graphed (Ex. 2001, 30:8–11); (2) Beifus’s two formulas correspond to the formulas for “Option 1” and “Option 2” shown in Figure 6 (id. at 33:12–36:19); (3) operating speed, breakdown speed, no load speed, and shape-description number n are variables used in the formula disclosed by Beifus (id. at 22:23–23:10); (4) the calculation disclosed by Beifus could be performed on the fly in a motor controller (id. at 47:6–14); and (5) Beifus does not explicitly disclose that any precalculations are performed (id. at 43:1–23). These aspects of Dr. Sidman’s testimony are consistent with Patent Owner’s reading of Beifus.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “We see no compelling reason to modify these constructions based on the positions of the parties as developed during the trial, and adopt them for this Decision. With respect to the construction of “torque table,” Patent Owner asserts: If the Board’s construction means that the table need not be in any particular format in the memory, but the table must still store the alternative torque values required by the claim “in a memory connected to the motor,” then Patent Owner accepts this interpretation for the purposes of this proceeding. However, if the Board’s construction including reference to “a torque curve graphically representing a set of torque values” does not require the torque values shown on the curve to be stored in memory, it is erroneous. PO Resp. 9. We agree with Patent Owner’s position, namely that “[t]he broadest reasonable interpretation of ‘table’ still must require the torque values to be stored in the table.” Id. As Patent Owner points out, “[t]he only intrinsic evidence available in this proceeding demonstrates a ‘torque table’ stores alternative torque settings.” Id. In particular, the ’092 patent consistently uses “table” to refer to discrete data that are stored in a memory, such as in the “speed tables” described as alternatives to “torque tables.” See Ex. 1001, col. 11, ll. 5–24, col. 16, ll. 63–66 (“Instead of adjusting the torque as described above, the motor controller 18 could store a plurality of different torque or speed tables and select one of the torque/speed tables based on an input provided by the torque adjustment mechanism.”). This aspect of the construction of “torque table” is reflected in its reference to including a graphical representation of “a set” of torque values in a memory connected to a motor.” slip op. at 7

  Patent outcomesUS 7,990,092 not shown unpatentable
  Claim construction§ 102 anticipation
  Patents in suitUS 7,990,092
• Snap-On Inc. v. Milwaukee Electric Tool CorporationNo claims unpatentable
  PTAB · Nov 14, 2016 · IPR2015-01244 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1–8, 10, and 11 of the ’290 patent, claims 1–8 and 10–13 of the ’173 patent, and claims 1–6 and 8–19 of the ’510 patent were not shown unpatentable under § 103 over Fohr, …

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “B. Level of Ordinary Skill in the Art We hold that the prior art references asserted in the Petition are representative of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (absence of specific findings on “level of skill in the art does not give rise to reversible error ‘where the prior art itself reflects an appropriate level and a need for testimony is not shown’” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). To the extent that a more specific definition is required, we hold that an ordinary artisan would include one holding a Bachelor’s Degree in Electrical Engineering with two or three years of experience in battery design. That definition comports with the very similar definitions advanced by the parties. In that regard, Petitioner asserts that an ordinary artisan would encompass a person holding a Bachelor’s Degree in Electrical Engineering with three years of experience in battery design. Pet. 8; Ex. 1007 ¶ 9. Patent Owner similarly asserts that an ordinary artisan would include a person holding a Bachelor’s Degree in Electrical Engineering with two years of battery design experience. Resp. 8; Ex. 2105 ¶ 24.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “given its broadest reasonable construction in light of the specification of the patent in which it appears. 37 C.F.R. § 42.100(b); see Cuozzo Speed Techs., LLC v. Lee, 136 S. Ct. 2131, 2144–46 (2016) (upholding the use of the broadest reasonable interpretation standard). Under the broadest reasonable construction standard, claim terms are given their ordinary and customary meaning, as would be understood by one of ordinary skill in the art in the context of the entire disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007). Any special definition for a claim term must be set forth in the specification with reasonable clarity, deliberateness, and precision. In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1994). In our Decisions to Institute, we construed the 20 Amp Limitation to require that “the battery cells, when configured together in a battery pack, are capable of producing reasonably close to 20 amps of discharge current or greater over the course of delivering their entire rated capacity.” Dec. 5. Neither party disputes that construction, which we adopt for the purposes of this Final Written Decision. To the extent that any other claim term requires express construction, we discuss the construction in our analysis below. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (only claim terms in controversy need be construed, and then only to the extent necessary to resolve the controversy). The following facts are supported by a preponderance of the evidence.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Not reached

    “D. Fohr as Prior Art As an initial matter, the parties dispute whether Fohr qualifies as prior art. Resp. 10–15; Reply 2–8; Sur-Reply 1–5. Specifically, Patent Owner seeks to antedate Fohr based on inventor testimony. Resp. 10–15; Sur- Reply 1–5. Petitioner responds that the named inventors are not true inventors with standing to establish facts sufficient to antedate Fohr. Reply 2–8. We decline to reach the antedating issue because it is not necessary to our ultimate conclusion on the question of obviousness. Specifically, even if we accept Petitioner’s view that Fohr qualifies as prior art, we ultimately hold that Petitioner fails to establish by a preponderance of the evidence that any challenged claim would have been obvious over the combined disclosures of Fohr, Sato, and Hallaj. That is so because, as explained below, Petitioner fails to establish that one of ordinary skill in the art would have been led to combine Fohr with Sato and Hallaj in the manner claimed.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “We recognize that it may be necessary “to look to interrelated teachings of multiple patents . . . in order to determine whether there was an apparent reason to combine the known elements in the fashion claimed.” KSR Int’l, 550 U.S. at 418. Petitioner in these proceedings, however, directs us to no persuasive reason why an ordinary artisan would have turned to the heat-retaining battery module of Hallaj when working to implement a plurality of Sato’s cells in a pack to replace the capacitors in Fohr. Pet. 36–38 (nowhere addressing that critical point); Reply 13 (devoting four sentences to rebuttal of Patent Owner’s persuasive evidence that one would not have combined the disclosures of Hallaj, Fohr, and Sato in the manner claimed); see Ex. 1033, 15 (Examiner’s observation, in confirming the patentability of the challenged claims during reexamination, that Sato contains “no information as to how Sato’s cells would be implemented in a pack”). We view Petitioner’s unexplained leap from the single battery cell of Sato to the heat-retaining battery module of Hallaj as a classic example of impermissible hindsight reconstruction driven not by any teaching in the prior art, but by the claim requirement of a “plurality” of cells implemented in a battery pack. Pet. 36–38; Reply 13. Patent Owner, by contrast, comes forward with persuasive evidence, which we credit, showing that one of ordinary skill in the art would not have been led to arrange a plurality of Sato’s cells in the heat-retaining battery module of Hallaj because such a modified battery pack would have been unsuitable for use as a replacement for the capacitors in Fohr. Specifically, we credit the testimony of Dr. Blomgren, who cogently explains why a person of ordinary skill in the art would not have been led to the proposed modification. Ex. 2147 ¶¶ 79–85. Dr. Blomgren explains that the proposed modified battery pack “would not have adequate heat dissipation and the Joule heating naturally occurring during operation” of such a pack “would lead to overheating and cell failure” in a power tool application. Resp. 24 (citing Ex. 2147 ¶ 84). That testimony is consistent with the Examiner’s observation, made during reexamination, that “the discharge rates described in Sato are abnormally high” for a power tool cell and “would lead to overheating of the cells.” Ex. 1033, 14. That testimony also is consistent with information provided by Petitioner’s own witness, Dr. Riley, who acknowledged on cross-examination that the battery pack of Fohr, as modified by Sato and Hallaj, would provide “the heat back to the system after a discharge” and, accordingly, would have no “practical applicability” in a power tool application. Resp. 24 (quoting Ex. 2169, 127:13–18, 131:12–24); see Ex. 2169, 127:9–128:2 (Petitioner’s own witness, Dr. Riley, further explaining that Hallaj is concerned with finding “a way of managing heat generation” in a power supply so that “heat can be used, pulled back into the batteries”). We credit Dr. Blomgren’s testimony that the “storing of heat” in Hallaj would have been “antithetical to” Sato’s lithium-based chemistry cells for use as the energy store in Fohr’s hand held power tool. Ex. 2147 ¶ 83. Petitioner’s own witness, Dr. Riley, provides testimony consistent with that view. Resp. 24 (citing Ex. 2169, 12713–18, 131:12–24) (Dr. Riley’s testimony on cross-examination); see Ex. 2147 ¶¶ 81–85 (Dr. Blomgren’s declaration testimony). That view is reinforced by evidence that the discharge rates supported by Hallaj are orders of magnitude lower than what would have been expected for a battery cell meeting the 20 Amp Limitation. Resp. 25; Pet. 38; Ex. 1015, 5:41-44; Ex. 2147 ¶¶ 79–80; see Ex. 1015, 5:41–44 (Hallaj, describing temperature profiles for discharge rates). We are persuaded that the heat-retaining battery module of Hallaj was not designed to handle, in a power tool application, the discharge currents disclosed for Sato’s individual lithium-based battery cell—much less the discharge currents that would be supplied by a plurality of Sato’s cells. Resp. 25 (citing Ex. 2147 ¶¶ 81, 84); see also Ex. 2147 ¶¶ 62–85 (testimony explaining why one of ordinary skill in the art would not have applied a plurality of Sato’s cells in the battery pack configuration of Hallaj to power Fohr’s hand held power tool). We further find that one of ordinary skill in the art would not have been led to replace the capacitors in Fohr’s power tool with Hallaj’s battery module, modified to include a plurality of Sato’s lithium-based cells. Ex. 2147 ¶¶ 62–85. That combination would have presented a serious risk of overheating and, in light of that risk, an ordinary artisan would not have expected the modified battery pack of Hallaj to successfully power Fohr’s hand held power tool. Id.” slip op. at 17

  Patent outcomesUS 7,999,510 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,999,510

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.