- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - PTAB · Feb 6, 2026 · IPR2025-00988 · APJ Terrence W Mcmillin · IPR · Institution
The Board instituted IPR on claims 1–14 and all petition grounds; it found a reasonable likelihood of success on the Josiam-based grounds, while the Bharadwaj grounds lacked established prior-art status.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2020) (“The Board institutes the trial on behalf of the Director.”). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition and the Preliminary Response, as well as the evidence of record, we institute an inter partes review as to claims 1–14 of the ’281 patent.3” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Determining the level of ordinary skill in the art involves various factors, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The prior art of record also reflects the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this institution decision, we adopt the assessment offered by Petitioner.11 It is not materially disputed by the Patent Owner and is consistent with the ’281 patent and the asserted prior art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner asserts “that no formal claim constructions are necessary.” Pet. 3. “Patent Owner applies the plain and ordinary meaning of the challenged claims.” Prelim. Resp 11. At this stage, no need exists to expressly construe any claim terms to resolve any dispute between the parties.12 See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). D.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedReference is prior artDecided for petitioner
“contention that either of the cited documents alone discloses all the elements of these limitations. And, the disclosure relied on in Exhibit 1007 is not alleged to be found in Exhibit 1009 and vice-versa. Patent Owner has not shown that any of the pre-May 14, 2016, Korean applications from which the ’281 claims priority includes disclosure of all the elements recited in limitations 1.9 and 8.6. At least at this stage, we determine that Petitioner has sufficiently shown, for the purpose of institution that Josiam is prior art.16 We credit the testimony of Dr. Buehrer cited in the Petition that none of the Korean applications to which the ’281 patent claims priority filed earlier than May 14, 2016, “explicitly, implicitly, or inherently discloses using both the bandwidth field of the HE-SIG-A and the resource unit allocation field of the HE-SIG-B to indicate channel puncturing information as the claim elements require. . . . At best, these documents discuss indicating unused channels using either HE-SIG-A or HE-SIGB fields—but not both.” Pet. 7 (citing Ex. 1003 (Buehrer Decl.) ¶¶ 90–91). Dr. Buehrer’s testimony has not been shown by Patent Owner to be inaccurate.” slip op. at 20
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,687,281 - Allstate Insurance Company v. Atos, LLCSome claims unpatentablePTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand
Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”
RulingsRemand decision- RemandOther
“was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35
Patent outcomesUS 9,846,174 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,846,174 - PTAB · Dec 19, 2025 · IPR2025-01110 · APJ Kristen L Droesch · IPR · Institution
The Board instituted IPR on claims 1–16, finding a reasonable likelihood they are obvious over Kim and over Chu and Choi.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted unless it is determined that “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable 1 Deputy Director Stewart was recused in this matter. claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine, based on the record before us, there is a reasonable likelihood Petitioner would prevail in showing at least one of the challenged claims is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a Bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and at least 3 years of experience in the research, design or development of wireless communication devices, systems, and/or networks, or the equivalent, as of the Critical Date,” and that “[i]ncreased educational experience can make up for less work experience, and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 26–28). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art, except as to the date that pertains to such skill level. Prelim. Resp. 4–5. Namely, Patent Owner asserts that “Petitioner is incorrect” that “the ’171 Patent is entitled to an effective date of no earlier than January 22, 2021.” Id. at 5. For the purpose of institution, we adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’171 Patent Specification and the asserted prior art, except that we delete the qualifier “at least” to eliminate vagueness as to the amount of required experience.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“claim construction standard as that applied in federal courts in a civil action under 35 U.S.C. § 282(b), which is generally referred to as the Phillips standard. See 37 C.F.R. § 42.100(b); Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Under the Phillips standard, “words of a claim ‘are generally given their ordinary and customary meaning.’” Phillips, 415 F.3d at 1312. “Petitioner submits that no formal claim constructions are necessary.” Pet. 1–2. Similarly, “Patent Owner does not contend that any formal claim construction is necessary” at this stage of the proceeding. Prelim. Resp. 5. For the purpose of institution, we need not explicitly construe any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Corp. Techs., Inc. v. Microsoft Corp., 627 F.3d 859, 870–71 (Fed. Cir. 2010). For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must [] convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.”), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). On the record before us, we do not agree that the ’171 Patent is entitled to a filing date earlier than Jan. 11, 2021. In particular, we do not agree that PCT ’199 describes the invention in enough detail such that a person of ordinary skill in the art could conclude that the inventor was in possession of the invention as of the March 4, 2016 filing date. The disclosures of PCT ’199 cited by Patent Owner to show written description support show: (1) transmission packets for multi-user uplink data, which includes padding such that multi-user upstream data transfers from each resource terminate at the same time (see Ex. 1012 ¶¶ 17–21); (2) performing padding on a trigger frame that triggers multi-user simultaneous transmission, where the trigger frame includes AID information of the performing preset padding before the FCS field of the trigger frame according to one embodiment (see Ex. 1012 ¶ 136, Fig. 20); and (4) inserting redundant AID information prior to the FCS field of the trigger frame, according to another embodiment (see Ex. 1012 ¶ 136, Fig. 20). PCT ’199 does not describe the invention in enough detail to enable a person of ordinary skill in the art to conclude that the inventor possessed a frame for allocating resource for uplink (UL) multi-user (MU) transmission to one or more terminals that includes the AID field set to a value related to a first padding field, when the padding field is included in the frame. In particular, we discern no disclosure that conveys that the inventor possessed the following: (1) an AID field for the MU UL resource allocation frame is set to a value, (2) that the AID field is set to a value related to the padding field, and (3) that the AID field is set to a value related to the padding field, and conditioned on the inclusion of the AID field in the frame. Moreover, to the extent that Patent Owner’s assertions are premised on the PCT ’199’s disclosure of a preset padding being performed before the FCS field of the trigger frame and the disclosure of inserting redundant AID information prior to the FCS field of the trigger frame, we note that these disclosures are directed to two embodiments. See Ex. 1012 ¶ 136, Fig. 20. PCT ’199 does not provide any suggestion that the two embodiments are used together, or that the redundant AID information of one embodiment can serve as a preset padding of the other embodiment.” slip op. at 16
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,716,171 - PTAB · Dec 19, 2025 · IPR2025-01111 · APJ Kristen L Droesch · IPR · Institution
The Board instituted IPR on claims 1–18, finding a reasonable likelihood they are unpatentable over Kim and over Chu in combination with Choi.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted unless it is determined that “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable 1 Deputy Director Stewart was recused in this matter. claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine, based on the record before us, there is a reasonable likelihood Petitioner would prevail in showing at least one of the challenged claims is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a Bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and at least 3 years of experience in the research, design or development of wireless communication devices, systems, and/or networks, or the equivalent, as of the Critical Date,” and that “[i]ncreased educational experience can make up for less work experience, and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 26–28). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art, except as to the date that pertains to such skill level. Prelim. Resp. 4. Namely, Patent Owner asserts that “Petitioner is incorrect” that “the ’186 Patent is entitled to an effective date of no earlier than April 8, 2019.” Id. at 4–5. For the purpose of institution, we adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’186 Patent Specification and the asserted prior art, except that we delete the qualifier “at least” to eliminate vagueness as to the amount of required experience.” slip op. at 10
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must [] convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.”), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). On the record before us, we do not agree that the ’186 Patent is entitled to a filing date earlier than April 8, 2019. In particular, we do not agree that PCT ’199 describes the invention in enough detail such that a person of ordinary skill in the art could conclude that the inventor was in possession of the invention as of the March 4, 2016 filing date. The disclosures of PCT ’199 cited by Patent Owner to show written description support, show: (1) transmission packets for multi-user uplink data, which includes padding such that multi-user upstream data transfers from each resource terminate at the same time (see Ex. 1012 ¶¶ 17–21); (2) performing padding on a trigger frame that triggers multi-user simultaneous transmission, where the trigger frame includes AID information of the stations assigned to each channel (see Ex. 1012 ¶¶ 134–135, Fig. 20); (3) performing preset padding before the FCS field of the trigger frame inserting redundant AID information prior to the FCS field of the trigger frame, according to another embodiment (see Ex. 1012 ¶ 136, Fig. 20). PCT ’199 does not describe the invention in enough detail to enable a person of ordinary skill in the art to conclude that the inventor possessed a trigger frame indicating uplink transmission for one or more terminals that includes an AID field used to identify whether the trigger frame includes a padding field, and the trigger frame including the padding field when the AID field is set to a specific value. In particular, we discern no disclosure that conveys that the inventor possessed the following: (1) a trigger frame indicating uplink transmission to one or more terminals and including an AID field used to identify whether the trigger frame includes a padding field; (2) the AID field for the trigger frame is set to a specific value, and (3) that trigger frame includes the padding field when the AID field is set to a specific value. Moreover, to the extent that Patent Owner’s assertions are premised on the PCT ’199’s disclosure of a preset padding being performed before the FCS field of the trigger frame and the disclosure of inserting redundant AID information prior to the FCS field of the trigger frame, we note that these disclosures are directed to two embodiments. See Ex. 1012 ¶ 136, Fig. 20. PCT ’199 does not provide any suggestion that the two embodiments are used together, or that the redundant AID information of one embodiment can serve as a preset padding of the other embodiment. On the record before us, we also do not agree that KR ’754 describes the invention in enough detail such that a person of ordinary skill in the art could conclude that the inventor was in possession of the invention as of the March 17, 2015 filing date of KR ’754. The disclosures of KR ’754 cited by Patent Owner to show written description support show: (1) multiplexed terminals over respective channels, (see Ex. 1008 ¶¶ 65–66, Fig. 10); (2) differing the number of AID values in the batch acknowledgment (BA) information field when the number of terminals assigned to each channel differs, setting the length of each multiplexed group ACK differently, and, if necessary, aligning the lengths of the multiplexed group ACKs based on the channel with the longest assigned BA information by adding zero padding or repeatedly inserting BA information (see Ex. 1008 ¶¶ 66–70, Fig. 11); and (3) applying the use of the AID field padding and the use of BA padding in a downlink OFDMA trigger process during multi-user downlink transmission to align the length of the trigger when the AP notifies the terminals assigned to each channel by inserting zero padding or repeating AIDs (see Ex. 1008 ¶¶ 71–72, Figs. 11–12). KR ’754 does not describe the invention in enough detail to enable a person of ordinary skill in the art to conclude that the inventor possessed a trigger frame indicating uplink transmission for one or more terminals that includes an AID field used to identify whether the trigger frame includes a padding field, and the trigger frame including the padding field when the AID field is set to a specific value. In particular, we do not discern disclosure in KR ’754 that conveys that the inventor possessed the following: (1) a trigger frame indicating uplink transmission to one or more terminals and including an AID field used to identify whether the trigger frame includes a padding field; (2) the AID field for the trigger frame is set to a specific value, and (3) that trigger frame includes the padding field when the AID field is set to a specific value. We find misplaced Patent Owner’s argument that “KR ’754’s discussion about Figure 10 and Figure 11 would have been understood [by a POSITA] as disclosing a padding method used to improve predictability and consistency trigger frame” (Prelim. Resp. 12) because: (1) it addresses uplink transmissions and not a trigger frame indicating uplink transmission to one or more terminals; (2) it does not address that the padding field is included in the trigger frame when the AID field is set to a specific value; and (3) it is unsupported attorney argument regarding the understanding of a person of ordinary skill in the art. Argument of counsel cannot take the place of objective evidence. See Gemtron Corp. v. Saint-Gobain Corp., 572 F.3d 1371, 1380 (Fed. Cir. 2009). We also find misplaced Patent Owner’s argument that “the padding discussed by KR ’754 regarding its Figure 12 embodiment is not limited to downlink transmission and would have been understood by a POSITA as also being used to schedule uplink ones” (Prelim Resp. 14) because: (1) KR ’754 does not provide any suggestion that the same technique can be used for uplink transmission trigger frames; (2) Patent Owner’s argument does not address that the padding field is included in the trigger frame when the AID field is set to a specific value; and (3) Patent Owner’s argument is unsupported attorney argument regarding the understanding of a person of ordinary skill in the art. See Gemtron, 572 F.3d at 1380. For the foregoing reasons and based on this record, for the purpose of institution, we find that the ’186 Patent is not entitled to an effective filing date earlier than April 8, 2019 and find that Kim is prior art. We note that the limitations at the heart of the written description dispute were added in an amendment filed August 9, 2020. See Ex. 1002, 214–21. In further briefing, the parties should address the respective burdens of production and persuasion for establishing that the ’186 Patent is entitled to an earlier” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We do not agree with Patent Owner’s arguments because they are premised on Choi’s teachings as limited to AIDs transmitted via a control frame broadcast as a TIM element. A prior art “reference must be considered for everything it teaches by way of technology and is not limited to the particular invention it is describing and attempting to protect.” EWP Corp. v. Reliance Universal Inc., 755 F.2d 898, 907 (Fed. Cir. 1985) (emphasis omitted). Chu, Choi, and the testimony of Dr. Ding (Ex. 1003), we are persuaded Petitioner sets forth sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to combine Chu’s teachings with Choi’s use of specific AID or ΔAID values as indicators of the end of meaningful data and the beginning of padding that would allow client stations to reliably determine where the useful content of the trigger frame ends and where optional padding begins, with the benefits of improved parsing efficiency, enhanced synchronization, and reduced likelihood of misinterpreting padding as data as padding. See Pet. 46–48 (citing Ex. 1003 ¶¶ 150–156; Ex. 1015 ¶ 93; Ex. 1016 ¶¶ 24, 184), 61–62 (citing Ex. 1003 ¶¶ 157–163, Pet. 45–48); KSR, 550 U.S. at 418.” slip op. at 29
§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 10,911,186 - PTAB · Dec 10, 2025 · IPR2025-01069 · APJ Daniel J Galligan · IPR · Institution
The Board instituted IPR on claims 1–14 and all asserted grounds, finding a reasonable likelihood of prevailing based on Bharadwaj alone and Bharadwaj with Yu.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute review. Paper 11. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless the information presented in the Petition and the Preliminary Response shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons explained below, we institute an inter partes review of all challenged claims on all grounds raised in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“To the extent Patent Owner contends that a person of ordinary skill in the art need not be defined as of the critical date, we disagree. Under Section 103, we must determine “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains” (emphasis added). “Obviousness is determined from the vantage point of a hypothetical person having ordinary skill in the art to which the patent pertains.” In re Rouffet, 149 F.3d 1350, 1357 (Fed. Cir. 1998). Thus, we define the hypothetical person of ordinary skill in the art as of a time before the effective filing date. To the extent Patent Owner’s argument is that, to testify from the perspective of a person of ordinary skill in the art, one need not have been a person of ordinary skill in the art as of the critical date, we agree. Although one must at least possess ordinary skill in the art to testify from the perspective of a person of ordinary skill, [a]n expert need not have acquired that skill level prior to the time of the invention to be able to testify from the vantage point of a person of ordinary skill in the art. Rather, an expert can acquire the necessary skill level later and develop an understanding of what a person of ordinary skill knew at the time of the invention. Osseo Imaging, LLC v. Planmeca USA Inc., 116 F.4th 1335, 1341 (Fed. Cir. 2024). the uncontested assessment offered by Petitioner, which appears consistent with the ’077 patent and the asserted prior art, except that we delete the qualifier “at least” to eliminate vagueness as to the amount of experience.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“C. Claim Construction The parties agree that no claim terms require express construction. Pet. 10; Prelim. Resp. 2–4. Patent Owner, however, notes that, in related district court litigation, Petitioner has asserted that some claims terms are indefinite. Patent Owner argues that the Petition should be denied because Petitioner has taken inconsistent claim construction positions between the district court and the Board. Paper 14 at 1–3 (citing Tesla, Inc. v. Intellectual Ventures II LLC, IPR2025-00340, Paper 18 at 4 (PTAB Nov. 5, 2025) (informative); Revvo Techs., Inc. v. Cerebrum Sensor Techs., Inc., IPR2025-00632, Paper 20 at 4–5 (PTAB Nov. 3, 2025) (precedential)). Petitioner responds that, in the related district court litigation, the parties have narrowed the claim construction disputes and that Petitioner accords the plain and ordinary meaning to claim terms and no longer asserts that any claim term of the ’077 patent is indefinite. Paper 15 (citing, inter alia, Ex. 1126 (Defendants’ Responsive Claim Construction Brief)). The evidence supports Petitioner’s position because, in the related district court litigation, the defendants agree with the plaintiff (Patent Owner) that certain phrases in the ’077 patent claims should be given their “[p]lain and ordinary meaning” and are “not indefinite.” Ex. 1126, 6 (native page 1). Thus, the record does not show inconsistent claim construction positions that warrant denial under PTAB precedent. See Revvo, Paper 20 at 5 (addressing a situation in which a petitioner advances “different claim construction positions” in district court and at the PTAB). See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“We agree with Patent Owner that Bharadwaj includes subject matter that is not in Bharadwaj-Prov59, namely the change from adding the value Resp. 20; Ex. 1007 ¶ 51 (adding m); Ex. 1006 ¶ 50 (subtracting m); Prelim. Resp. 20. Petitioner, however, points out this change in the Petition and acknowledges that it is after the identified critical date of August 20, 2015. See Pet. 28. Thus, we do not understand Petitioner to be relying on Bharadwaj’s disclosure of subtracting m to determine length, as disclosed in the publication of the non-provisional application, as a prior art disclosure. We understand Petitioner to be relying on disclosures in Bharadwaj-Prov059 for prior art teachings for its obviousness contentions. Patent Owner does not appear to dispute that Bharadwaj-Prov59’s disclosures are prior art, arguing instead that it is improper to rely “on matters in Bharadwaj beyond ‘incorporation by reference’ of the Bharadwaj-Prov59.” See Prelim. Resp. 20–21. On this record, we determine that Bharadwaj-Prov59’s disclosures are prior art as of its June 2, 2015, filing date by virtue of its incorporation by reference into Bharadwaj, a published US patent application. Ex. 1006 ¶ 1; see Pet. 12–13.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,313,077 - Good Sportsman Marketing, LLC v. Hangzhou ZH Tech Co., Ltd.All claims unpatentablePTAB · Nov 20, 2025 · PGR2024-00034 · APJ Annette R Reimers · PGR · Final written decision
Claims 1–19 are unpatentable: claims 1–19 as obvious over Unger and Smith, claim 18 also as obvious over Unger, Smith, and Hakansson, and claims 3–6, 8, 9, and 16 as indefinite.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We note that the identification of a Ph.D. as an example of “more formal education” creates a vast range of education relative to a bachelor’s degree. Thus, we treat the identification of a Ph.D. just as it is—an example—and not a requirement. In this case, “more formal education” can be satisfied by a level of education less than a Ph.D (but greater than a bachelor’s degree). Based on our review of the record before us, we determine that Petitioner’s stated level of ordinary skill in the art is reasonable because it appears consistent with the evidence of record, including the asserted prior art. Accordingly, we adopt Petitioner’s definition, limited as discussed above, for the purposes of this Decision.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that it “does not believe any terms need to be construed to resolve the prior art issues presented in this Petition.” Pet. 20 (citing Ex. 1002 ¶ 89). any claim language because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Petitioner argues that one of ordinary skill in the art would have found the proposed modification obvious for several reasons. Pet. 30. For instance, Petitioner argues that “Unger contains an express teaching, suggestion and/or motivation to incorporate an element such as Smith’s torsional spring into the lower and/or upper mount assemblies 308, 312 to facilitate attachment and detachment.” Id. Namely, Petitioner points to Unger’s disclosure that device mounts 308, 312 may be flexible or resilient so that device mounts 308, 312 may be bent to engage a portion of hearing protection device 108 and are then allowed to return to a normal state to secure communication device 104 to hearing protection device 108. Id. at 30–31 (quoting Ex. 1004, 6:20–37). Petitioner adds that one of ordinary skill in the art would have understood this disclosure “to teach that mount arms 308, 312 could be removable from housing 304 (e.g., as mount arm 312 is in Figure 6) and/or they could be designed to be ‘flexible’ or ‘resilient’ such that they can be manipulated,” and “that ‘resilient’ is defined as ‘bouncing or springing back into shape, position, etc. after being stretched, bent, or, esp., compressed.’” Id. at 31 (citing Ex. 1002 ¶ 117). Thus, according to Petitioner, this disclosure of Unger suggests using a torsion spring. Id. In addition, Petitioner asserts that one of ordinary skill in the art would have understood Unger’s disclosure to “suggest the use of a torsion designed to impart this functionality.” Pet. 30 (citing Ex. 1002 ¶ 118). Petitioner also asserts that one of ordinary skill in the art would have “understood that there were a limited number of ways to impart the referenced resilient or flexible ‘manipulation,’” and “would have been motivated to look to various known solutions to impart the suggested functionality, including the torsional spring mechanism of Smith that is used in a similar hearing protection device application for a similar purpose as Unger’s mounting arms (to apply a clamping force).” Id. at 32 (citing Ex. 1002 ¶¶ 120–121). Other reasons for combining the references set forth by Petitioner are the proposed modification: (1) “would have involved applying a known technique to a known device ready for improvement to yield predictable results” (Pet. 39–49 (citing Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023); Ex. 1002 ¶ 131)), (2) would have constituted “combining prior art elements using known methods to achieve predictable results” (id. at 40 (citing KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 416 (2007); Ex. 1002 ¶ 133)); and (3) would have been “the simple substitution of one known element (i.e., Smith’s torsion spring mechanism) into another (i.e., the connection point of Unger’s lower mount arm 308 and housing 304)” (id. at 40–41 (citing Apple Inc. v. Samsung Elecs. Co., 839 F.3d 1034, 1077 (Fed. Cir. 2016); Ex. 1002 ¶ 135)). Petitioner argues that one of ordinary skill in the art would have had a” slip op. at 22
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“i) Conclusion For the above reasons, we find, based on the record before us, that Petitioner establishes by a preponderance of the evidence that claim 1 would have been obvious over the combination of Unger and Smith. Patent Owner does not contend that any limitations in claim 1 are absent in the combination of Unger and Smith, or that claim 1 would not have been obvious over the combination of Unger and Smith, and therefore, has waived such arguments.8” slip op. at 28
Patent outcomesUS 11,736,855 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham · NautilusPatents in suitUS 11,736,855
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.