• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Taiwan Semiconductor Manufacturing Company Ltd. / Apple Inc. v. Marlin Semiconductor Ltd.Instituted
  PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution

  Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,745,847
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Instituted
  PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution

  The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Shenzhen Xinzexing E-Commerce Co., Ltd. v. Shenzhen Carku Technology Co., Ltd.All claims unpatentable
  PTAB · Jul 24, 2025 · IPR2024-00222 · APJ Garth D Baer · IPR · Final written decision

  Claims 1–3, 6–23, and 25–33 are unpatentable, including as anticipated by Chen and as obvious over the Chen and Inskeep combinations.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “have at least a Bachelor’s Degree in Electrical Engineering and at least two years of experience in the field of electrical engineering and specifically power supply management such as battery charging system design.” PO Resp. 31. Petitioner presents a similar formulation. Pet. 10. Although we do not discern any meaningful distinction between the parties’ formulations, we adopt Patent Owner’s description of a person of ordinary skill as it is consistent with the prior art and challenged patent’s specification. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill).” slip op. at 5

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “a first current through one or more output ports of the at least one output port in a first operating mode,” and “is configured to output a second current capable of starting a vehicle engine through the pair of output terminals in a second operating mode.” Ex. 1001, 8:25–34. Claim 21 has similar first and second operating-mode limitations. Id. at 9:40–46. Patent Owner proposes that “[t]he proper construction for ‘first operating mode’ is ‘an operating mode of the portable backup charger wherein the battery pack is configured to output a first current through one or more output ports of the at least one output port, and outputting a second current capable of starting a vehicle engine through the pair of output terminals is inhibited.’” PO Resp. 25. Similarly, Patent Owner argues “[t]he proper construction for ‘second operating mode’ is ‘an operating mode of the portable backup charger wherein the battery pack is configured to output a second current capable of starting a vehicle engine through the pair of output terminals, and outputting a first current through one or more output ports of the at least one output port is inhibited.’” Id. at 27. Patent Owner asserts that claim differentiation supports its construction because dependent claim 3 recites “a third operating mode for outputting the first current and the second current simultaneously,” and “if the battery pack could output the first current and the second current simultaneously in the first operating mode, then there would be no difference between the claimed first operating mode and the claimed third operating mode.” Id. at 26. We disagree with Patent Owner’s constructions because, as Petitioner explains, they wrongly import current-inhibiting limitations beyond the plain language in the claim. Pet. Reply 1. Nothing in the at-issue language addresses inhibiting current. In addition, the claimed first and third operating modes are still distinct without importing additional limitations because outputting just the first current is sufficient for the first operating mode, but not for the third. In other words, whereas the third operating mode requires simultaneity, the first and second merely permit it. Thus, claim differentiation does not support Patent Owner’s construction. Last, although Patent Owner asserts that its construction “is consistent with the specification,” nothing in the cited passages describes inhibiting current. Prelim. Resp. 26 (citing Ex. 1001, 4:30–33, 5:30–33, 5:58–62). Instead, the specification characterizes the modes solely by what the portable charger “can output,” not what is inhibited. Ex. 1001, 4:30–33, 5:30–33, 5:58–62. Thus, we decline to read the first and second operating modes to require the current-inhibiting features that Patent Owner asserts.” slip op. at 6

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Patent Owner argues the two current paths are not different because Chen’s Figure 1 shows they overlap between the lithium battery and the output control circuit and “only diverge when making the connection to the output control circuit.” PO Resp. 32. We disagree. First, Patent Owner’s argument is based on a claim construction for “different” current paths that we do not adopt for the reasons above. In addition, we agree with Petitioner that Chen shows the claimed different current paths even under Patent Owner’s construction. Pet. Reply 8–12. Specifically, as Petitioner explains, a skilled artisan would recognize that Chen’s physical circuits are depicted in Figures 4–7, rather than in Chen’s Figure 1, which is merely a “block diagram of the principle of present invention.” Id. at 9; Ex. 1006 ¶ 15. Unlike Figure 1, Chen’s Figures 5, 6, and 7 show current paths between the battery and USB outputs, and between the battery and DC multi-gear output, that do not overlap with the high current path shown in Chen’s Figure 4. Pet. 9–12. Based on Petitioner’s analysis and for the reasons above, we agree with Petitioner that Chen teaches the claimed “pair of output terminals coupled to the battery pack and having a current path to the battery pack different from that of the at least one output port to the battery pack.”” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner asserts one skilled in the art would not have added White’s fuse to Chen because doing so was “unnecessary” given Chen’s built-in relay K1 that already provides protection. PO Resp. 42–43. We disagree because, as Petitioner notes, “the Petition cited ample evidence that both layers of over current prevention provide improved safety and protection to the battery.” Pet. Reply 17 (citing Pet. 31–33); see also, e.g., Pet. 31 (describing “advantageously reduc[ing] the likelihood of damage”), id. at 32 (describing “the additional benefit of a safety fuse along a jumper cable to promptly cut off current in the event of a short circuit” and “more simplified maintenance and repair”). Given Petitioner’s unrebutted rationale, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that adding White’s fuse and polarity-protection connector to Chen’s power-supply system would have been obvious to one of ordinary skill in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). Other than the arguments addressed above, Patent Owner does not additionally challenge Petitioner’s obviousness showing based on Chen and White. We have reviewed Petitioner’s arguments and evidence and, based on that analysis, we find Petitioner has shown by a preponderance of the evidence that claims 1, 2, 6–9, 11–14, 16–22, 25–28, and 30–33 would have been obvious over Chen and White.” slip op. at 15

  Patent outcomesUS 9,643,506 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 9,643,506
• Azurity Pharmaceuticals, Inc. v. Exelixis Inc.Institution denied
  PTAB · Jun 4, 2025 · IPR2025-00210 · APJ Jeffrey N Fredman · IPR · Institution

  The Board denied institution on all grounds because Petitioner did not show a reasonable likelihood of proving claims 1–3 unpatentable.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Accordingly, we find that on the current record Petitioner has not shown that the combination of Brown, Kubo, and Remington would inherently result in less than 200 ppm impurity and Petitioner has not shown that it has a reasonable likelihood that it would prevail on the obviousness ground.” slip op. at 29

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedReference not prior artDecided for patent owner

    “Here, there is no dispute that the ’349 patent and Wilson, which issued from a patent application from which priority was claimed for the ’349 patent, share the identical disclosure of a pharmaceutical composition comprising Compound IA or IB; one or more fillers; one or more disintegrants; one or more glidants; and one or more lubricants. In this embodiment, the filler comprises microcrystalline cellulose. In this embodiment, the disintegrant comprises croscarmellose sodium. In this embodiment, the disintegrant comprises croscarmellose sodium and sodium starch glycolate. In this embodiment, the glidant comprises fumed silica. In this embodiment, the lubricant comprises stearic acid. Ex. 1001, 21:1–12; Ex. 1002, 20:51–62. There is express ipsis verbis disclosure of the elements recited in claim 1 of the ’349 patent.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “1. Reason to reduce contaminant levels We agree with Patent Owner that Petitioner identifies no teaching in the prior art providing any reason to reduce levels of 6,7-dimethoxy-quinoline-4-ol specifically. And while Brown does teach a desire to form “substantially pure” compounds, Brown focuses on “at least about 90 wt.%” of the compound, then lists specifically “about 90, about 91, about 92, about 93, about 94, about 95, about 96, about 97, about 98, about 99 and about 100% wt. %.” Ex. 1003 ¶ 97. This permits a range of concentration for contaminants from about 0 to 10%.” slip op. at 24

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable

    “to modify Brown’s process with Kubo to eliminate the added step. See, e.g., Id. ¶ 73. But even with that combination, Dr. Dichtel states only that a “POSA would have expected there to be a decrease in the amount of 6,7- dimethoxy-quinoline-4-ol at the end of cabozantinib (L)-malate’s synthesis that was attributable to hydrolytic degradation of the 4- (nitrophenoxy)quinoline intermediate by avoiding its use in the synthesis.” Id. ¶ 78. That is not, however, the standard for inherency. It must be the necessary result, not a possible expected result. The Federal Circuit in Par explained that: Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient. If, however, the disclosure is sufficient to show that the natural result flowing from the operation as taught would result in the performance of the questioned function, it seems to be well settled that the disclosure should be regarded as sufficient.” slip op. at 28

  § 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 11,298,349
• Apple Inc. v. Geoscope Technologies Pte. Ltd.All claims unpatentable
  PTAB · May 7, 2025 · IPR2024-00031 · APJ Annette R Reimers · IPR · Final written decision

  Claims 16–20, 24, 26, and 27 are unpatentable: claims 16, 19, 20, 24, and 27 are anticipated by Bhattacharya, and all challenged claims are obvious over Bhattacharya and Spain.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner for the following reasons. First, Patent Owner’s definition is consistent with our determination in IPR2023-01210, which involved the same ’358 patent, and Petitioner does not explain sufficiently why we should adopt a different definition. See generally Pet. Reply.” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “Sundaresan Declaration, Dr. Sundaresan implied agreement with the POSITA definition based on its inclusion in a signed declaration.” Pet. Reply 15. We agree with Petitioner. Although Dr. Sundaresan does not state explicitly that the proposed definition of the ordinary skill in the art is his opinion, we are persuaded that the manner in which the definition is set forth in his declaration indicates that he agrees with the definition. In this case, Patent Owner attempts to make much of Dr. Sundaresan’s statement that he had been informed of the qualifications of a person of ordinary skill in the art. See PO Resp. 42–44. Dr. Sundaresan’s testimony, however, set forth this understanding of the requisite level of skill in the art (Ex. 1003 ¶ 8). In his supplemental declaration, Dr. Sundaresan further testifies that: I agreed with this POSITA definition when preparing the Declaration, and I continue to hold the opinion that the POSITA definition is both correct and appropriate based on the disclosures of the ’358 patent and the prior art analyzed in the Declaration. Ex. 1055 ¶ 17. Dr. Sundaresan further testifies that “[i]f I did not agree with the POSITA definition, then it would not have been included [] in paragraph 8 of the Declaration.” Id. ¶ 18. Dr. Sundaresan’s inclusion of the definition of the level of ordinary skill in his original declaration indicates that he” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “explained below, we agree with Petitioner that Patent Owner’s additional requirement of evaluating the calibration data to determine the boundaries of the area represented by a grid point should not be included in the construction of either “grid point” or “non-uniform grid point.” Instead, based on the full record, we discern no reason to alter our prior construction of “grid point” as “a point associated with representative calibration data for an area” and maintain that construction for this Final Written Decision. The construction of “grid point” we adopt is supported by the Specification of the ’358 patent. Namely, the ’358 patent discloses that “[i]n general, a non-uniform grid point (NUG) may represent the signal characteristics and/or calibration data over a given region,” and “NUGs district court identified the second quoted passage, which is identically recited in the ’104 patent (see Ex. 2018, 3:50–60) as “provid[ing] a clear indication of the meaning of ‘grid point.’” Ex. 2012, 19 (emphasis added). We agree with the district court’s analysis. Although the ’358 patent does not explain how a generic “grid point” might differ from the described “nonuniform grid point,” we do not find this distinction pertinent to construing “grid point” in this case because neither party raises this issue. Also, based on the claim wording “non-uniform grid point,” a “non-uniform grid point” is a type of grid point. See Pet. Reply 4 (explaining why that plain meaning supports Petitioner’s proposed construction). Furthermore, the district court construed “grid point” only, not “non-uniform grid point.” Ex. 2012, 18–20.” slip op. at 26

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Based on the entire trial record, we agree with Petitioner’s analysis with supporting evidence and credit Dr. Sundaresan’s testimony supporting Petitioner’s position. See Pet. 20–37. Thus, we determine that Bhattacharya discloses the recitations of claim 15. b. Remaining Claims 16, 19, 20, 24, and 27 Claims 16, 19, 20, 24, and 27 depend from claim 15. Ex. 1001, 13:19–21, 12:30–36, 12:52–55; 12:63–67. Petitioner accounts for the limitations recited in each of claims 16, 19, 20, 24, and 27. Pet. 37–42. Patent Owner does not offer any arguments specifically addressing the limitations of claims 16, 19, 20, 24, and 27. See PO Resp. passim. Petitioner shows, by a preponderance of the evidence, that each element of claims 16, 19, 20, 24, and 27 is disclosed by Bhattacharya.” slip op. at 41

  Patent outcomesUS 8,400,358 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,400,358
• Apple Inc. v. Geoscope Technologies Pte. Ltd.All claims unpatentable
  PTAB · May 7, 2025 · IPR2024-00032 · APJ Brian D Range · IPR · Final written decision

  Claims 2–5, 9, 11, 12, 14–16, 18–22, 27, 29, 31, and 32 are unpatentable over the asserted anticipation and obviousness grounds; claims 1, 25, and 35 were disclaimed.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The ’494 patent is directed to locating a wireless mobile device in a geographic region. Ex. 1001, 1:20–27; PO Resp. 45. Bhattacharya is directed to estimating the geographic location of a wireless terminal. Ex. 1005, code (57), ¶¶ 1, 13; PO Resp. 44–45. Spain is directed to a method for locating the concentration of mobile radio traffic in a coverage area. Ex. 1006, code (54), ¶¶ 1, 11; PO Resp. 45. We find that there is support in the ’494 patent and prior art consistent with Patent Owner’s assertion that the qualifications of a person of skill would include knowledge of radio navigation and mobile communications technology. Accordingly, we adopt Patent Owner’s proposed qualifications for a person of ordinary skill.” slip op. at 9

  • BurdenDecided for petitioner

    “Patent Owner, however, has not identified any language in the Petition that explicitly incorporates by reference Dr. Sundaresan’s testimony. See generally PO Resp.; PO Sur-Reply. Nevertheless, to the extent that the Petition purportedly incorporates by reference Dr. Sundaresan’s testimony, we do not find such incorporation sufficiently extensive to merit disregarding the testimony. Typically, an incorporation by reference is deemed improper in instances in which large portions of a declaration are incorporated—particularly where the incorporation serves to circumvent a word-count limit. See, e.g., Cisco Systems, Inc. v. C-Cation Techs., LLC, IPR2014-00454, Paper 12 at 10 (PTAB Aug. 29, 2014) (informative). In this case, however, Dr. Sundaresan’s testimony describing the level of ordinary skill in the art is short. Ex. 1003 ¶ 8. The amount of testimony is not extensive and, thus, its purported incorporation into the Petition presents little or no imposition on Patent Owner or the Board.” slip op. at 12

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “In reply, Petitioner argues that “under any reasonable read of the Sundaresan Declaration, Dr. Sundaresan implied agreement with the POSITA definition based on its inclusion in a signed declaration.” Pet. Reply 15. We agree with Petitioner. Although Dr. Sundaresan does not state explicitly that the proposed definition of the ordinary skill in the art is his opinion, we are persuaded that the manner in which the definition is set forth in his declaration indicates that he agrees with the definition. Patent Owner attempts to make much of Dr. Sundaresan’s statement that he had been informed of the qualifications of a person of ordinary skill in the art. See PO Resp. 41–43. Dr. Sundaresan’s testimony, however, set forth this understanding of the requisite level of skill in the art (Ex. 1003 9 Dr. Sundaresan has a doctoral degree in electrical and computer engineering and has extensive experience in wireless communications. Ex. 1003 ¶¶ 75–78. Dr. Sundaresan also has experience with navigation and geolocation systems such as development of wireless tracking systems, as evidenced by his experience in companies such as NavigateIO Inc. Id. at ¶¶ 77–78. Patent Owner does not argue that Dr. Sundaresan fails to meet requirements for the level of qualifications of one of ordinary skill in the art under its proposed qualifications, which we adopt here. See generally PO Resp.; PO Sur-reply. Based on a review of his qualifications, we determine that Dr. Sundaresan qualifies as a person of ordinary skill at the time of the invention. ¶ 8). In his supplemental declaration, Dr. Sundaresan testifies: I agreed with this POSITA definition when preparing the Declaration, and I continue to hold the opinion that the POSITA definition is both correct and appropriate based on the disclosures of the ’358 patent and the prior art analyzed in the Declaration. Ex. 1055 ¶ 17. Dr. Sundaresan further testifies that “[i]f I did not agree with the POSITA definition, then it would not have been included [] in paragraph 8 of the Declaration.” Id. ¶ 18. Dr. Sundaresan’s inclusion of the definition of the level of ordinary skill in his original declaration indicates that he agrees with the definition, as confirmed by his cited subsequent testimony. We note that, even with Patent Owner’s arguments, the record is clear that Patent Owner was on notice of Petitioner’s proposed definition of the level of ordinary skill at the time of the Petition. Pet. 6; cf. Corephotonics, Ltd. v. Apple Inc., 84 F.4th 990, 1006 (Fed. Cir. 2023) (holding that Petitioner is not required to anticipate all arguments in its Petition and allowing consideration of reply where patent owner had sufficient notice of petitioner’s position and adequate opportunity to respond).” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “explained below, we agree with Petitioner that Patent Owner’s additional requirement of evaluating the calibration data to determine the boundaries of the area represented by a grid point should not be included in the construction of either “grid point” or “non-uniform grid point.” Instead, based on the full record, we discern no reason to alter our prior construction of “grid point” as “a point associated with representative calibration data for an area” and maintain that construction for this Final Written Decision.” slip op. at 27

  Patent outcomesUS 8,786,494 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,786,494

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.