- PTAB · Jan 27, 2025 · IPR2024-00965 · APJ Zhenyu Yang · IPR · Institution
Instituted review of claims 1–6 on all asserted grounds because Petitioner showed a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has satisfied the threshold requirement set forth in 35 U.S.C. § 314(a). Accordingly, we institute inter partes review of all challenged claims based on the ground raised in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedInstituted
“We agree with Patent Owner that testimony from a “custodian with any personal knowledge of arXiv.org or its regular practices” would have strengthened Petitioner’s argument that Gloor is prior art. See Prelim. Resp. 20; see also, e.g., Murray & Poole Enters. LTD v. Institut De Cardiologie De Montreal, IPR2023-01064, Paper 49 (PTAB Jan. 14, 2025) (considering testimony regarding the internet archive service known as the Wayback Machine (https://web.archive.org/) in determining public accessibility). At the institution stage, however, Petitioner needs to show that Gloor qualifies as prior art by “a reasonable likelihood” standard. See Hulu, LLC, v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 13 (PTAB Dec. 20, 2019) (precedential) (“[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.”). We find that, for purposes of institution, Petitioner has met its burden to show a reasonable likelihood that Gloor was publicly accessible before the priority date of the ’200 patent. To prevail in this inter partes review, Petitioner must meet the preponderance of the evidence standard. See 35 U.S.C. § 316(e). Thus, we encourage the parties to fully develop the record during trial to facilitate the ultimate resolution of this issue.” slip op. at 9
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“institution under § 325(d). Prelim. Resp. 21–29. Under 35 U.S.C. § 325(d), in determining whether to institute an inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” Our § 325(d) analysis employs a two-prong framework: (1) whether the arguments presented in the petition are the same or substantially the same as those previously presented to the Office; and (2) if so, whether the petitioner has demonstrated a material error by the Office in its prior consideration of those arguments. Advanced Bionics, LLC v. Med-El Electromedizinishe Gerӓte GmbH, IPR2019-01469, Paper 6 (“Advanced Bionics”), 8 (PTAB Feb. 13, 2020) (precedential).” slip op. at 11
§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 11,768,200 - PTAB · Jan 27, 2025 · IPR2024-00964 · APJ Zhenyu Yang · IPR · Institution
The Board instituted IPR on claims 1–8 based on both asserted obviousness grounds: Parameswaran with Gloor and Parameswaran with Bentley.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has satisfied the threshold requirement set forth in 35 U.S.C. § 314(a). Accordingly, we institute inter partes review of all challenged claims based on the ground raised in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“We agree with Patent Owner that testimony from a “custodian with any personal knowledge of arXiv.org or its regular practices” would have strengthened Petitioner’s argument that Gloor is prior art. See Prelim. Resp. 27; see also, e.g., Murray & Poole Enters. LTD v. Institut De Cardiologie De Montreal, IPR2023-01064, Paper 49 (PTAB Jan. 14, 2025) (considering testimony regarding the internet archive service known as the Wayback Machine (https://web.archive.org/) in determining public accessibility). At the institution stage, however, Petitioner needs to show that Gloor qualifies as prior art by “a reasonable likelihood” standard. See Hulu, LLC, v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 13 (PTAB Dec. 20, 2019) (precedential) (“[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.”). We find that, for the purposes of institution, with Dr. Gloor’s declaration and the supporting exhibits attached therein, Petitioner has met this burden. To prevail in this inter partes review, Petitioner must meet the preponderance of the evidence standard. See 35 U.S.C. § 316(e). Thus, we encourage the parties to fully develop the record during trial to facilitate the ultimate resolution of this issue.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“detailed analysis to support its argument that the combination of Parameswaran and Gloor teaches or suggests each limitation of claim 1. Pet. 23–36. Petitioner also contends that an ordinarily skilled artisan would have been motivated combine the teachings of the two references and would have had a reasonable expectation of success in doing so. Id. at 36–45. Patent Owner counters that the combination does not teach or suggest two limitations, namely the amplifying and discarding steps of the method. Prelim. Resp. 18–24. Patent Owner also challenges Gloor’s prior art status. Id. at 24–28. Based on the current record, we find Petitioner’s argument with respect to the amplifying and discarding steps more persuasive. With respect to the remaining limitations, we find persuasive Petitioner’s analysis on the prior art’s teachings. We also find persuasive Petitioner’s analysis on the motivation to combine and reasonable expectation of success. For the purposes of institution, we adopt those analyses as our own. We address Patent Owner’s counterarguments below.” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“cross-over events (id. at 18–21). Based on the current record, we find Petitioner’s argument more persuasive. Petitioner relies on the combination of Parameswaran and Gloor as teaching the amplifying step. See Pet. 31–33. As such, Patent Owner cannot show non-obviousness “by attacking references individually.” In re Keller, 642 F.2d 413, 426 (CCPA 1981). Patent Owner argues that “because Parameswaran used pyrosequencing on the surface of beads in a Roche 454 sequencer, it does not disclose the formation of clusters.” Prelim. Resp. 21 (citing Pet. 31). Petitioner, however, relies on Gloor for teaching “amplifying said nucleic acid templates on a surface of a flow cell thereby to form clusters.” Pet. 31–32. Patent Owner does not challenge this reliance. See generally Prelim. Resp. Patent Owner contends that Petitioner “equat[es] the claimed chimeric sequences with ‘mismatched’ or ‘misassigned’ sequences containing an ‘unexpected’ pair of forward and reverse barcode motifs identified in Parameswaran.” Prelim. Resp. 18–19. But, according to Patent Owner, “Petitioner does not point to any disclosure in Parameswaran identifying these “mismatched” motifs as chimeric sequences—as opposed to mere sequencing or sample handling error—nor does Petitioner cite any disclosure in Parameswaran regarding such sequences resulting from cross-over events.” Id. at 19. We find Patent Owner’s characterization of Petitioner’s argument inaccurate. As we understand it, Petitioner does not “equat[e]” the claimed chimeric sequences with “mismatched” sequences in Parameswaran. Instead, as Patent Owner acknowledges, “Petitioner argues that ‘sequences with mismatched barcode motifs’ in Parameswaran ‘include chimeric sequences resulting from cross-over events.’” Id. (quoting Pet. 32) (emphasis added).” slip op. at 14
§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,041,852 - PTAB · Jan 13, 2025 · IPR2024-01156 · APJ Jeffrey N Fredman · IPR · Institution
The Board instituted inter partes review of claims 1–30 on all grounds, finding it more likely than not that the claims are unpatentable.
RulingsInstitution decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the current record, there is no controversy over the meaning of any of the claim terms and neither party identifies a claim construction that would impact our analysis. We therefore find that, at this stage of the proceeding, there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“VIII. LEVEL OF ORDINARY SKILL IN THE ART Petitioner asserts (without opposition): A person of ordinary skill in the art (“POSA”) at the time of invention would have a working knowledge of microbiology and would have been involved in developing testing methodologies for analysis of samples such as food products (“validation methodologies”). The POSA would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies. The POSA would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Determining whether claims are anticipated involves a two-step analysis. The first step involves construction of the claims of the patent at issue. Claim construction is a question of law reviewed de novo.” In re Aoyama, 656 F.3d 1293, 1296 (Fed.Cir.2011). “The second step [of an anticipation analysis] involves comparing the claims to the prior art. Anticipation is a question of fact reviewed for substantial evidence.” In re Aoyama, 656 F.3d at 1296. “A prior art reference anticipates a patent claim under 35 U.S.C. § 102(b) if it discloses every claim limitation.” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012). A reference may anticipate inherently if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“The motivation-to-combine analysis is a flexible one. “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed,” [but the] “analysis ‘need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.’” Intel Corp. v. PACT XXP Schweiz AG, 61 F.4th 1373, 1379–80 (Fed. Cir. 2023) (quoting KSR, 550 U.S. at 418, 420 (emphasis added)). “[I]f there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine,” because KSR explains that “if a technique has been used to improve one device [or method], and a person of ordinary skill in the art would recognize that it would improve similar devices [or methods] in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” Id. at 1380 (quoting KSR, 550 U.S. at 417; and Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 797 (Fed. Cir. 2021)). If addressing a known problem, the prior art combination need not be “the best option, only . . . a suitable option.” Id. (quoting Intel, 21 F.4th at 800 (emphasis original)).” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,845,486 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Resonant Systems, Inc.Some claims unpatentablePTAB · Jan 8, 2025 · IPR2023-00992 · APJ Steven M Amundson · IPR · Final written decision
Claims 1, 2, 7, 8, 11, and 17 are unpatentable; claims 3–6, 9, and 14 are not shown unpatentable, and claims 15 and 16 were disclaimed.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“B. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the time of the alleged invention “would have had a bachelor’s degree in electrical engineering, mechanical engineering, computer science, or a similar field and two years of experience related to electronic consumer product design.” 3 The parties do not provide evidence or argument regarding objective indicia of nonobviousness. See, e.g., Pet. 9–93; Resp. 18–66. Pet. 6. Petitioner also asserts that an ordinarily skilled artisan “could have also obtained similar knowledge and experience through other means.” Id. Dr. Wolfe’s testimony supports Petitioner’s assertions. See Ex. 1003 ¶ 30. Patent Owner asserts that a person of ordinary skill in the art at the time of the alleged invention “would have had (1) a bachelor’s degree in electrical engineering, mechanical engineering, or a comparable field of study, and (2) at least two years of professional experience with electro-mechanical control systems, or other similarly relevant industry experience.” Resp. 3. Patent Owner also asserts that “[a]dditional relevant industry experience may compensate for lack of formal education or vice versa.” Id. Dr. Goossen’s testimony supports Patent Owner’s assertions. See Ex. 2008 ¶ 16.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“10. SUMMARY “[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.” Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Above, we discussed issues concerning the “component” limitations in claims 1, 3, and 4 and an ambiguity in claim 4. See supra §§ III.C.4(c), III.C.5(c), III.C.6(c), III.C.7(c), III.C.8(c), III.C.9. We determine that no other claim language requires a discussion of scope or an explicit construction to decide whether Petitioner satisfies the “preponderance of the evidence” standard for proving unpatentability. D. Alleged Obviousness over Fukumoto: Claims 1–3, 7–9, and 17 Petitioner contends that claims 1–3, 7–9, and 17 are unpatentable under § 103(a) because the claims would have been obvious over Fukumoto. See Pet. 9–35; Reply 16–22. Patent Owner disputes Petitioner’s contentions. See Resp. 18–27; Sur-reply 7–14. Below, we provide an overview of Fukumoto. Then, we consider the obviousness issues. For the reasons explained below, we agree with Petitioner that claims 1, 2, 7, and 17 are unpatentable under § 103(a) because the claims would have been obvious over Fukumoto but disagree that claims 3, 8, and 9 are unpatentable based on Fukumoto.” slip op. at 44
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) does not applyDecided for patent owner
“2. MEANS-PLUS-FUNCTION CLAIMING The patent statute provides that “[a]n element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.” 35 U.S.C. § 112 ¶ 6 (2006). The absence of the word “means” in a claim limitation creates a rebuttable presumption that § 112’s means-plus-function provision does not apply. Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc in relevant part). When a claim limitation lacks the word “means,” a party may rebut the presumption that § 112’s means-plus-function provision does not apply by demonstrating that “the claim term fails to ‘recite[] sufficiently definite structure’ or else recites ‘function without reciting sufficient structure for performing that function.’” Williamson, 792 F.3d at 1348 (alteration by the court) (quoting Watts v. XL Sys., Inc., 232 F.3d 877, 880 (Fed. Cir. 2000)). Construing a means-plus-function limitation involves two steps: first, identify the claimed function or functions; and second, determine what structure, if any, disclosed in the patent’s specification corresponds to the claimed function or functions. Williamson, 792 F.3d at 1351; see Medtronic, Inc. v. Advanced Cardiovascular Sys., Inc., 248 F.3d 1303, 1311 (Fed. Cir. 2001). For the second step, a person of ordinary skill in the art must “recognize the structure in the specification and associate it with the corresponding function in the claim.” All-Voice Computing PLC v. Nuance Commc’ns, Inc., 504 F.3d 1236, 1241 (Fed. Cir. 2007). The “duty to link or associate structure to function is the quid pro quo for the convenience” of using means-plus-function claiming. B. Braun Med., Inc., v. Abbott Lab’ys, 124 F.3d 1419, 1424 (Fed. Cir. 1997). When a limitation recites two or more functions, the specification” slip op. at 18
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“Conclusion About Obviousness/Nonobviousness For the reasons discussed above, Fukumoto teaches claim 1’s subject” slip op. at 64
Patent outcomesUS 9,369,081 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,369,081 - PTAB · Nov 14, 2024 · PGR2024-00026 · APJ Hyun J Jung · PGR · Institution
Instituted PGR on claims 1–7 and all grounds because Petitioner showed it was more likely than not that at least one challenged claim lacks written-description support.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this stage, Petitioner’s arguments, cited portions of the Specification, and supporting testimonial evidence demonstrate that it is more likely than not that claims 1–7 are unpatentable.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateDecided for petitioner
“patent describes that “angular position transducer 78 is placed on top of swing leg pivot shaft 24” and that “pivot shaft 24 is rotationally fixed to the connector plate and duplicates the angular movements of swing leg 20 about the pivot shaft.” Ex. 1001, 12:15–16, 12:20–22, Figs. 5, 7. The ’723 patent also describes that “[a]ngular position transducer 78 is mounted inside . . . protective can 90 . . . which is bolted to hinge bracket 28 via an upright holding arm 92” and that “trigger pin 94 projects upwardly from the top surface of pivot shaft 24 and cooperates with angular position transducer 78 to generate an angular position signal.” Id. at 12:28–33, Fig. 5. These descriptions expressly convey that angular position transducer 78 is on pivot shaft 24 and mounted inside protective can 90 that is bolted to hinge bracket 28. Id. at 12:15–16, 12:20–22, 12:28–30, Figs. 5, 7; see also Prelim. Resp. 17 (describing the same embodiment shown in Figs. 5 and 7). According to Petitioner, the ’723 patent describes the pivot shaft as part of the hinge bracket, not the modular frame or swing leg. Pet. 109–110 (citing Ex. 1001, 7:42–46, 12:17–22). On the preliminary record, we agree because the cited portions of the Specification describe that a “hinge bracket is interposed between each swing leg and an associated surface of the bolsters and includes a fixed, upright pivot shaft that pivotally engages the swing leg for pivotal movements” and “pivot shaft 24 is rotationally fixed to the connector plate.” Ex. 1001, 7:42–45, 12:20–21. We also agree that “even if one were to find that the hinge bracket is part of either the modular frame or swing leg (contrary to the claims and specification treating these all as separate components), the specification would only provide written description for one of the claimed alternatives.” Pet. 110 (citing Ex. 1002 ¶ 199).” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this preliminary stage, we determine that express claim interpretation is not necessary to determine whether it is more likely than not that at least one of the claims challenged in the petition is unpatentable. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We will also not use our discretion under § 325(d) to deny the Petition based on arguments previously presented in IPR2021-00135, because Petitioner relies on a Board determination regarding claim 8 from IPR2021- 00136, not arguments previously made for claim 1 in IPR2021-00135. Pet. 111–115, 119; Prelim. Resp. 8–9; Prelim. Sur-reply 5. Furthermore, we determined the effective filing date of claim 8 of the ’571 patent without deciding, that other challenged claims, such as claim 1, were entitled to their earliest possible effective filing date. See Godberson-Smith, Paper 61 at 11, 12.” slip op. at 12
Claim construction§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,772,723 - PTAB · Nov 8, 2024 · IPR2024-00834 · APJ Tawen Chang · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood of unpatentability and declining discretionary denial under §§ 325(d) and 314.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). The Board may authorize an inter partes review if we determine that the information presented in the Petition and Patent Owner’s Preliminary Response shows a reasonable likelihood that Petitioner will prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314(a).” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“anticipated by Sonti. Pet. 3. To show anticipation under 35 U.S.C. § 102, each and every claim element, arranged as in the claim, must be found in a single prior art reference. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359 (Fed. Cir. 2008). The prior art need not, however, use the same words as the claims to find anticipation. In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009). In evaluating anticipation, it is permissible to take into account not only the literal teachings of the prior art reference, but also the inferences the skilled artisan would draw from it. Eli Lilly and Co. v. Los Angeles Biomedical Res. Inst. At Harbor-UCLA Med. Ctr., 849 F.3d 1073, 1074–75 (Fed. Cir. 2017) (holding that the “dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference”). As such, “a reference can anticipate a claim even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Kennametal, Inc. v. Ingersoll Cutting Tool Co., 780 F.3d 1376, 1381 (Fed. Cir. 2015) (internal quotation and alteration marks omitted).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“b. Reasonable Expectation of Success Petitioner asserts that an ordinarily skilled artisan would have been motivated, with a reasonable expectation of success, to topically administer 1% tapinarof composition once a day to treat mild to severe plaque psoriasis in view of Sonti’s teaching to apply its compositions (including 1% tapinarof compositions) in various application frequencies (including once daily) to treat moderate to severe plaque psoriasis. Pet. 29–30 (citing, e.g., Ex. 1003 ¶¶ 182–184, 187–188; Ex. 1005 Abstract, ¶¶ 55, 196, 288, 387).” slip op. at 32
- Obviousness (§103) › Objective indicia / secondary considerationsInstituted
“d. Objective Indicia of Non-obviousness Patent Owner asserts that, although the “Petition notes the patent’s ‘surprising[] and unexpected[]’ finding that once daily application of 1% tapinarof cream was just effective as twice daily application, . . . the Petition does not analyze, as the law requires, this surprising, unexpected finding in its obviousness arguments.” Prelim. Resp. 52. We are not persuaded by this argument. Immediately after the Petition’s acknowledgement that “[t]he specification [of the ’088 patent] contends that it was ‘surprisingly’ found that once daily application was just as effective as twice daily,” the Petition notes that, “[h]owever, during prosecution the examiner cited a set of prior art by Chen et al. disclosing treating plaque psoriasis by topically applying a composition containing 1% tapinarof once a day.” Pet. 1 (footnote omitted). Indeed, Patent Owner acknowledges that Petitioner counters “Applicant’s surprising and unexpected findings” by referring to the Chen references cited during prosecution, but asserts that “Chen . . . does not undermine Applicant’s surprising and unexpected findings” because “Chen discloses applying a composition containing 1% mixture of cis and trans 3,5-dihydroxy-4-isopropylstilbene, and not one containing 1% tapinarof (3,5-dihydroxy-4-isopropyl-trans-stilbene).” Prelim. Resp. 52–53.16 As 16 Patent Owner refers to its earlier discussion on this issue. Prelim. Resp. 53 (“As already discussed . . .”). That earlier discussion is with respect to the Chen references cited in Sonti (i.e., Exs. 1012 & 1013), not the Chen 40” slip op. at 40
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,590,088 - Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentablePTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision
Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.
RulingsFinal written decision- BurdenMixed
“It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19
Patent outcomesUS 11,298,166 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,298,166 - PTAB · Sep 27, 2024 · IPR2024-00650 · APJ Deborah Katz · IPR · Institution
The Board instituted IPR of claims 1–38 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Director determines that the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). We determine whether to institute an inter partes review on behalf of the Director. See 37 C.F.R. § 42.4(a).” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“determined to be microsatellite instability high or DNA mismatch repair deficient were placed into a study arm and then treated with pembrolizumab. (See Ex. 1005, Ex. 1003 ¶¶ 60–73.) Because treatment of the patients was performed only after MSI-H status was determined, the MSI-H Study Record teaches treating the patients “in response to” determining their MSI- H status.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted
“have been expected, Petitioner cites to Brown as teaching that PD-1 inhibitors are inherently more effective when treating tumors comprised of cells that are easy for immune cells to recognize. (See Pet. 41 (citing Ex. 1034, 747).) Petitioner argues further that Duval teaches that MSI-H cancers have cells that are easy for immune cells to recognize. (See Pet. 41 (citing Ex. 1087, 5002).) Dr. Neugut’s testimony supports Petitioner’s argument that the cited teachings of Brown and Duval, as well as other references, would have motivated a person of ordinary skill in the art to obtain the results of the MSI-H Study Record. (See Ex. 1003 ¶¶ 124, 130, 132; see Pet. 41.) Petitioner argues further that Brown and Duval would have motivated one of ordinary skill in the art to obtain the results of the MSI-H Study Record by treating patients with common types of MSI-H cancers, including endometrial, small bowel, and gastric cancers. (See Pet. 41 (citing Ex. 1003 ¶ 130).) Petitioner argues further that the state of the art, as demonstrated by Brown and Duval, as well as other references, would have provided one of ordinary skill in the art with a reasonable expectation of success because physicians were successfully treating patients with cancers that were known to be MSI-H with PD-1 inhibitors. (See Pet. 42 (citing Ex. 1003 ¶¶ 131, 132).)” slip op. at 18
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that one of ordinary skill in the art relevant to the ’219 patent would have been a medical doctor or a professional in a related field with at least five years of experience with treating cancer. (See Pet. 11 (citing Neugut Decl., Ex. 1003 ¶19).) Petitioner argues further that the ordinarily skilled artisan would have experience in or access to a person with knowledge of clinical studies for therapeutics and how they work and to a pathologist with comparable experience. (See id.) Dr. Neugut’s testimony supports Petitioner’s arguments regarding the level of skill that an ordinarily skilled artisan in the relevant field would have. (See Ex. 1003 ¶ 19.) Accordingly, in the analysis below, and in the absence of argument by Patent Owner to the contrary, we apply the level of skill set forth by Petitioner and refer to Dr. Neugut’s testimony of what one of ordinary skill in the art would have understood at the time the application that became the ’491 patent was filed, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,634,491 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45
Patent outcomesUS 10,994,923 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,994,923
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.