• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonNo claims unpatentable
  PTAB · May 29, 2026 · IPR2025-00349 · APJ Jason M Repko · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Avellan did not disclose the claimed sequence of screen captures used to assemble a media stream.

  RulingsFinal written decision

  • Skill levelOther

    “Patent Owner submits a similar definition and does not dispute the Petition’s characterization of the level of ordinary skill in the art. PO Resp. 22. No express finding is necessary. The level of ordinary skill in the art is reflected by the prior art of record. Any perceived difference in how each party characterizes a POSITA does not change our analysis or conclusions.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “on ordinary and customary meaning. Pet. 14–15; PO Resp. 22. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding.” slip op. at 6

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “c. Analysis “A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. v. Union Oil Co. of California, 814 F.2d 628, 631 (Fed. Cir. 1987). We are persuaded by Patent Owner’s argument that Avellan does not anticipate claim 1 because it does not assemble a media stream of multimedia items using the recited screen captures. See PO Resp. 26–29. We agree with Patent Owner that the plain language of the claim requires more than transmitting individual media items. Sur-reply 21. To the extent that Avellan captures images, those images do not meet the claimed requirements for a “temporal sequence of screen captures” in the independent claims, which must (1) be of the web page rendered by a browser, (2) “define all the content of the web page at a given time,” (3) “illustrate a dynamic change of at least a portion of the content over time” when two of them are compared, and (4) used to assemble “the at least one media stream.” Rather, the record better supports Patent Owner’s argument that Avellan transmits the multimedia items separate from any media stream assembled from screen captures. PO Resp. 26–29; Sur-reply 21.” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “All other challenged claims require the “generating” and “assembling” operations because they depend from claims 1, 12, or 17. Petitioner does not allege that the additional references—Durante, Ma, Suzuki, Wanamaker, Heikens, Matthews, or Wilsher—teach or suggest the “temporal sequence of screen captures” recited in claim 1. Rather, Petitioner’s reasoning in the challenges to the dependent claims pertaining to the screen captures mirror the rationale presented in the independent claim. See, e.g., Pet. 25 (arguing that Avellan’s screen captures correspond to the video content in the challenge to claim 2), 26–27 (arguing that Avellan obtains screen captures from a playback of a video on the webpage in the challenge to claim 4). Petitioner’s argument that Avellan teaches or suggests these operations in the grounds based on obviousness under 35 U.S.C. § 103 depend on the reasoning and insufficiently supported characterizations of Avellan in the challenges based on 35 U.S.C. § 102, as discussed above. See Pet. 40–60. grounds based on anticipation under 35 U.S.C. § 102 or teaches or suggests these operations in the grounds based on obviousness under 35 U.S.C. § 103, Petitioner has not met its burden to show that any challenged claim is unpatentable as anticipated by Avellan or obvious over any of the combinations of Avellan and the other cited references.” slip op. at 15

  Patent outcomesUS 10,123,074 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 10,123,074
• Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentable
  PTAB · May 28, 2026 · IPR2025-00351 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–9 are unpatentable as obvious over the stated combinations; claims 10–26 were not shown unpatentable because Avellan does not teach limitations [10d]–[10f].

  RulingsFinal written decision

  • Skill levelOther

    “would have a bachelor’s or equivalent degree in computer science or a related field and at least 2 years of experience in multimedia processing or delivery using internet protocols.” Pet. 10 (citing Ex. 1002 ¶¶ 67–68). The Petition further states that “a person with less formal education but more experience, or more formal education but less experience, could have also met the relevant standard for a POSITA.” Id. Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art of delivering multimedia content. Resp. 18. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions. slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 11; Resp. 18–19; Reply 5. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner
  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentableNot shown unpatentable

    “To establish inherency, the extrinsic evidence “must make clear that the missing descriptive matter is necessarily present in the thing described in the reference, and that it would be so recognized by persons of ordinary skill.” Continental Can Co. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991). “‘Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.’” Id. at 1269 (quoting In re Oelrich, 666 F.2d 578, 581 (C.C.P.A. 1981)). Reasonable inferences of a POSITA may suffice to establish inherent disclosure in a prior art reference such as Farber. See Eli Lilly v. Los Angeles Biomedical Research Institute, 849 F.3d 1073, 1074–1075 (Fed. Cir. 2017) (“[T]he dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference.”). Here, however, we find the Petition’s argument and evidence insufficient to establish by a preponderance of the evidence that Farber inherently discloses limitation [1b].” slip op. at 16

  Patent outcomesUS 11,140,441 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 11,140,441
• Merck Sharp & Dohme LLC v. Halozyme, Inc.All claims unpatentable
  PTAB · May 12, 2026 · PGR2025-00003 · APJ Jeffrey N Fredman · PGR · Final written decision

  Claims 1–4 and 8–21 are unpatentable for lack of written description and enablement; obviousness over the ’429 patent and Chao was not shown.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “VII. LEVEL OF ORDINARY SKILL IN THE ART We consider the grounds of unpatentability in view of the” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “term “modified PH20 polypeptide” in the ’600 patent supports the understanding that some type of activity is required for a polypeptide to be a “modified PH20 polypeptide”, and that the enzymatic activity of hyaluronidase is the most frequently identified activity recited in the definitions section of the ’600 patent. Id. at 48:38–53, 50:9‒17, 51:15‒18, 52:41–47, 55:9–23, 63:37–44, 64:14–19. In contrast, the discussion regarding the potential use of “modified PH20 polypeptides that are inactive” as antigens in contraception vaccines appears only in a non-definitional section of the ’600 patent. Id. at 75:56–58, 72:60–62. Accordingly, it does not modify the definition’s explicit requirement that the claimed “modified PH20 polypeptide” exhibit hyaluronidase activity. Id. at 48:38–53.” slip op. at 19

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “been able to use the data in the Specification to make reasonable predictions about the effect of multiple modifications on hyaluronidase activity, we view this testimony to at most describe a research plan (i.e., a “tool to engage in further modification”14) for finding the recited polypeptides rather than demonstrating the inventors were in possession of the full scope claimed. This is particularly so given the limits of the then-available analytical tools noted above and the fact that the structural connections and three dimensional modeling Patent Owner’s experts attempt to make (see, e.g., Ex. 2070 ¶¶ 129–213; Ex. 2068 ¶ 123) do not appear in the written description itself. To the extent the experts disagree on this point, we credit the testimony of Petitioner’s experts over that of Patent Owner’s. For these reasons, we find that a preponderance of the evidence of record better supports a finding that in the 2011–12 timeframe, it would have been unpredictable to identify which multiple mutants retained hyaluronidase activity, even with the single substitution data provided by the ’600 patent.” slip op. at 51

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable

    “8. Conclusion We find that the balance of evidence supports a finding of undue” slip op. at 101

  Patent outcomesUS 11,952,600 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,952,600
• Therabody, Inc. v. Hyperice IP Subco, LLCNo claims unpatentable
  PTAB · May 11, 2026 · PGR2025-00013 · APJ Alyssa A Finamore · PGR · Final written decision

  Claims 1–16 and 18 were not shown unpatentable because the asserted prior art did not establish the claimed quick-connect system during reciprocation, and Clark was not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The prior art may reflect the level of ordinary skill in the art. Id.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “During oral argument, Petitioner confirmed it would not object to the Board adopting the construction that Petitioner proposes in the district court litigation. JUDGE MARSCHALL: I think the Petitioner wouldn’t object if we adopted the construction that Petitioner proposed in the district court, especially the “designed to” construction, correct? MR. BERG: No. We wouldn’t object to that. And we think that our Petition is on all fours with that construction. Tr. 81:12–16. As Petitioner does not object to adopting its construction from the district court litigation, we construe claim element 1[e] in accordance with Petitioner’s construction from the district court litigation.” slip op. at 11

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable

    “The invention, a reciprocating massage device, is in a predictable field, namely the electro-mechanical arts. Also, there is no evidence that the recited quick-connect system is complex, even considering Patent Owner’s alleged understanding of it. Rather, Dr. Pratt testifies that many different types of connectors, whether they require alignment or not, were known. Ex. 1002 ¶¶ 54–58. Given the predictability of the electro-mechanical arts and lack of complexity of the recited quick-connect system, a low level of detail is required to satisfy the written description requirement. See RAI Strategic Holdings, Inc. v. Philip Morris Prods. S.A., 92 F.4th 1085, 1090 (Fed. Cir. 2024) (“Given the predictability of electro-mechanical inventions such as the one at issue here, and the lack of complexity of the particular claim limitation at issue—i.e., reciting the length of a heating member—‘a lower level of detail is required to satisfy the written description requirement than for unpredictable arts.’” (quoting Hologic, Inc. v. Smith & Nephew, Inc., 884 F.3d 1357, 1361 (Fed. Cir. 2018)). In view of the low level of detail required to satisfy the written description requirement, Petitioner has not persuaded us that the Specification’s example of a quick-connect system configured to secure the massaging head as the piston reciprocates fails to provide sufficient written description support for the “quick-connect system” recited in independent claims 1 and 18.” slip op. at 14

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteNot shown unpatentable

    “Contrary to Petitioner’s assertion, the Specification provides guidance as to what amount of deviation from a perfect cylinder is still “substantially cylindrical.” The Specification describes: Quick-connect system 600 includes a piston 602 that has a hollow-end bore 608 for receiving the shaft 621 of a massaging head 620. Located within the bore 608 of piston 602 is a cylindrical seat 604. Cylindrical seat 604 retains a magnet 606. Magnet 606 is illustrated with its north pole located flush with the seat and facing toward the opening in bore 608. Massaging head 620 includes a shaft 621 having a cylindrical pocket 622 at the distal end. Located within the cylindrical pocket 622 is a magnet 624. Magnet 624 is positioned so that its south pole is located at the distal end of shaft 621. Accordingly, when the shaft 621 of massaging head 620 is slid into opening in bore 608, the magnets 606 and 624 are attracted to one another and magnetically hold massaging head 620 firmly in place. Ex. 1001, 6:57–7:3. In view of the description of quick-connect system 600, the Specification sets forth a standard for ascertaining whether the bore and the seat located within the bore are “substantially cylindrical.” To wit, the bore and the seat within the bore are “substantially cylindrical” when the massaging head and magnet are respectively received therein so that the magnet in the seat and the magnet in the pocket of the massaging head can magnetically hold the massaging head firmly in place. Furthermore, Dr. Pratt testifies that “[m]agnetic connectors comprise a magnet on at least one of the two objects to be joined. These types of connectors are ubiquitous even today for driving threaded fasteners.” Ex. 1002 ¶ 56. Dr. Pratt also testifies that a POSITA would understand how to take into account certain variances, like runout. Ex. 2033, 25:3–17. Dr. Pratt’s testimony shows that magnetic connectors are well known and that a POSITA would be able to determine whether the bore and the seat within the bore were “substantially cylindrical” for a secure connection of the massaging head. In view of the foregoing, Petitioner has not persuaded us that the claim term “substantially cylindrical” recited in claims 13–16 fails to inform, with reasonable certainty, the shapes of the bore and the structure within the bore. Petitioner has not proven, by a preponderance of the evidence, that any of claims 13–16 are unpatentable under 35 U.S.C. § 112(b) as indefinite.” slip op. at 19

  Patent outcomesUS 11,938,082 not shown unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 11,938,082
• Whoop, Inc. v. Omni Medsci, Inc.Instituted
  PTAB · May 6, 2026 · PGR2026-00003 · APJ John A Squires · PGR · Director review

  The Director instituted post-grant review of claim 7 of the ’790 patent under 35 U.S.C. § 324(a).

  RulingsDirector review decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “In this proceeding, Petitioner persuasively shows, on the current record, that the ’790 patent is an AIA patent. As Petitioner notes, during prosecution of the ’790 patent, Patent Owner certified that the ’790 patent application “contains, or contained at any time, a claim to a claimed invention that has an effective filing date on or after March 16, 2013.” Ex. 1002, 246; see Pet. 11–12. Patent Owner, therefore, acknowledged that the application was to be examined under the first inventor to file provisions of the AIA. Id. Also, Petitioner shows, for purposes of institution, that the provisional applications to which the ’790 patent claims priority do not provide written description support for a “wearable device adapted to be placed on a wrist or a hand dorsal of a user,” such that the detection system of the wearable device has a “plurality of detectors arranged along an arc,” as recited in claim 2. Pet. 13.1 Although Patent Owner asserts that one of the provisional applications provides written description support via a figure illustrating a mouth guard design and a disclosure that “[t]he non-invasive devices may be part of a series of biosensors applied to the patient,” I do not find this persuasive based on the current record. See Paper 6, 16–17 (citing Ex. 1071, 15–16, 29, 40); Ex. 1071, 7, 29, 40. Even if the mouth guard could be considered to have detectors arranged in an arc, the mouth guard is used to “perform a non-invasive measurement for dental caries” and is not described as “adapted to be placed on a wrist or a hand dorsal of a user,” as claim 2 requires. See Ex. 1071, 7, 29, 18–19, 40.” slip op. at 3

  • Disclosure Requirements (§112) › Written description (Ariad)Decided for petitioner

    “record, that the ’790 patent is an AIA patent. As Petitioner notes, during prosecution of the ’790 patent, Patent Owner certified that the ’790 patent application “contains, or contained at any time, a claim to a claimed invention that has an effective filing date on or after March 16, 2013.” Ex. 1002, 246; see Pet. 11–12. Patent Owner, therefore, acknowledged that the application was to be examined under the first inventor to file provisions of the AIA. Id. Also, Petitioner shows, for purposes of institution, that the provisional applications to which the ’790 patent claims priority do not provide written description support for a “wearable device adapted to be placed on a wrist or a hand dorsal of a user,” such that the detection system of the wearable device has a “plurality of detectors arranged along an arc,” as recited in claim 2. Pet. 13.1 Although Patent Owner asserts that one of the provisional applications provides written description support via a figure illustrating a mouth guard design and a disclosure that “[t]he non-invasive devices may be part of a series of biosensors applied to the patient,” I do not find this persuasive based on the current record. See Paper 6, 16–17 (citing Ex. 1071, 15–16, 29, 40); Ex. 1071, 7, 29, 40. Even if the mouth guard could be considered to have detectors arranged in an arc, the mouth guard is used to “perform a non-invasive measurement for dental caries” and is not described as “adapted to be placed on a wrist or a hand dorsal of a user,” as claim 2 requires. See Ex. 1071, 7, 29, 18–19, 40.” slip op. at 3

  § 112 disclosure
  Patents in suitUS 12,193,790
• Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCSome claims unpatentable
  PTAB · May 4, 2026 · IPR2021-01452 · APJ Sheridan K Snedden · IPR · Remand

  On remand, claims 6, 8, 9, 13, and 19 are unpatentable; claims 2–5, 11, 12, 17, and 18 were not shown unpatentable over Slater or Slater and Weaver.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, 12, 17, and 18 of the ’716 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 188–196. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 191– 196. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 18

  Patent outcomesUS 9,763,716 mixed
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 9,763,716
• Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCAll claims unpatentable
  PTAB · May 4, 2026 · IPR2022-00191 · APJ Sheridan K Snedden · IPR · Remand

  On remand, the Board held claims 15 and 21 unpatentable as anticipated by Slater.

  RulingsRemand decision

  • RemandOther

    “Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 381), affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 35) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1, 10, and 16 of U.S. Patent No. 9,763,716 B2 (“the ’716 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether either of dependent claims 15 and 21 is unpatentable. Stryker, slip op. at 17.” slip op. at 2

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 15 and 21 and find that Petitioner establishes that Slater discloses each limitation of claims 15 and 21 for the reasons provided by Petitioner. Specifically, Petitioner shows, and Patent Owner does not dispute, that Slater describes a plate with “flared hips” comprising opposing “generally parabolic wings” as recited in dependent claims 15 and 21. Pet. 31–33; Ex. 1005, Fig. 2; Ex. 1002 ¶ 124. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 31–33. Based on the foregoing, Petitioner proves by a preponderance of the evidence that Slater anticipates claims 15 and 21.” slip op. at 13

  Patent outcomesUS 9,763,716 unpatentable
  § 102 anticipation
  Patents in suitUS 9,763,716
• Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentable
  PTAB · May 4, 2026 · IPR2021-01450 · APJ Sheridan K Snedden · IPR · Remand

  On remand, claims 6, 8–10, 14, and 17 are unpatentable; claims 2–5, 12, and 13 were not shown unpatentable, based on anticipation by Slater and obviousness over Slater and Weaver.

  RulingsRemand decision

  • RemandMixed

    “Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 11 of U.S. Patent No. 8,529,608 B2 (“the ’608 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6, 8–10, 12–14, and 17 (the “Remanded Claims”) are similarly unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. at 14–15. We have jurisdiction under 35 U.S.C. § 6. We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Stryker Corporation and Wright Medical Technology, Inc. (collectively, “Petitioner”) and OsteoMed LLC (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Stryker, we find by a preponderance of the evidence that claims 6, 8–10, 14, and 17 are unpatentable. We also conclude that Petitioner has not demonstrated, by a preponderance of the evidence, that claims 2–5, 12, and 13 are unpatentable.” slip op. at 2

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 12, and 13 of the ’608 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 37–39; Ex. 1002 ¶¶ 161–169. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 162– 163. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 37. Patent Owner raised no separate argument regarding the patentability of claims 6 and 8, instead relying solely on its argument that Slater does not anticipate independent claim 1, on which claims 6 and 8 depend. PO Resp. 46; Reply 4 (“Patent Owner does not challenge the combination of Slater and Weaver for claims 6 and 8.”). We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 6 and 8 and find that Petitioner establishes that the combination of Slater and Weaver discloses all of the limitations of claims 6 and 8, and that one of ordinary skill in the art would have been motivated to combine Slater and Weaver for the reasons provided by Petitioner. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 37–39.” slip op. at 19

  Patent outcomesUS 8,529,608 mixed
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 8,529,608
• Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentable
  PTAB · May 4, 2026 · IPR2021-01451 · APJ Sheridan K Snedden · IPR · Remand

  On remand, claims 6, 8, 9, and 13 were held unpatentable; claims 2–5, 11, and 12 were not shown unpatentable because Slater lacks the claimed central axis.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableUnpatentableMixed

    “addressing the ’085 patent and by the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, and 12 of the ’776 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 169–74. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 169– 74. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 17

  • RemandOther

    “Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46, “FWD”) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 10 of U.S. Patent 9,351,776 B2 (“the ’776 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6 and 8, 9 and 11–13 (the “Remanded Claims”) are unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. 14– 15.” slip op. at 2

  Patent outcomesUS 9,351,776 mixed
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 9,351,776

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.