- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - Tesla, Inc. v. Iqar Inc.All claims unpatentablePTAB · Sep 18, 2025 · IPR2024-00630 · APJ Sean P O’Hanlon · IPR · Final written decision
Claims 1–16 are unpatentable as anticipated by Koebler and obvious over Koebler alone and in combination with other references.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995) (citing 35 U.S.C. § 120). Section 112 requires, inter alia, that the specification contain a written description of the claimed invention. 35 U.S.C. § 112(a). In determining whether the written description requirement is met, we consider “whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). This analysis requires “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. Thus, “the level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Id. For example, the analysis must consider “the existing knowledge in the particular field, the extent and content of the prior art, the maturity of the science or technology, [and] the predictability of the aspect at issue.” Id. (alteration in original) (quoting Capon v. Eshhar, 418 F.3d 1349, 1359 (Fed. Cir. 2005)). “While a prior application need not contain precisely the same words as are found in the asserted claims, the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008) (citations omitted); see also Purdue Pharma LP v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (“In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.”). However, “it is the specification itself that must demonstrate possession. And while the description requirement does not demand any particular form of disclosure . . . , a description that merely renders the invention obvious does not satisfy the requirement.” Ariad, 598 F.3d at 1352 (citations omitted); see also Lockwood v. Am. Airlines, 107 F.3d 1565, 1572 (Fed. Cir. 1997) (“While the meaning of terms, phrases, or diagrams in a disclosure is to be explained or interpreted from the vantage point of one skilled in the art, all the limitations must appear in the specification. The question is not whether a claimed invention is an obvious variant of that which is disclosed in the specification. Rather, a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.”).” slip op. at 7
- Skill levelSkill level board ownDecided for petitioner
“The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Initially, we note that, although Petitioner presents a definition for “traction” in its Reply (see Pet. Reply 10), Dr. Morellas agreed with Patent Owner’s proposed interpretation during his deposition: Q. What would a person having ordinary skill in the art understand the word “traction” to mean? A. It would mean the grip that the -- that the tire has with the road. Q. So when the tire is gripping the road, the vehicle will have traction; correct? A. Correct. Q. But if the wheels are spinning freely and not gripping the road, the vehicle has no traction; correct? A.· Correct. Ex. 2031, 36:8–17. Accordingly, we adopt Patent Owner’s interpretation of “traction” to be a measure “of the friction between the vehicle’s drive wheels and the road surface” such that “a vehicle’s wheels have ‘traction’ when wheel rotation acts to propel the vehicle along the roadway” and “[t]he vehicle’s wheels lose ‘traction’ when they spin freely relative to the road and thus are no longer acting to propel the vehicle along the roadway.” See PO Resp. 27; see also Tr. 18:4–5 (Petitioner’s counsel stating that “the ultimate disposition doesn’t matter which definition [of ‘traction’ the Board] adopt[s]”).” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“2. Anticipation “Under 35 U.S.C. § 102 a claim is anticipated ‘if each and every limitation is found either expressly or inherently in a single prior art reference.’” King Pharm., Inc. v. Eon Labs, Inc., 616 F.3d 1267, 1274 (Fed. Cir. 2010) (quoting Celeritas Techs. Ltd. v. Rockwell Int’l Corp., 150 F.3d 1354, 1360 (Fed. Cir. 1998)). “Anticipation requires the presence in a single prior art disclosure of all elements of a claimed invention arranged as in the claim.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). A reference inherently discloses an element of a claim “if that missing characteristic is necessarily present, or inherent, in the single anticipating reference.” Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (citing Cont’l Can Co. USA, Inc. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991)). “Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, 593 F.3d at 1332 (quoting Cont’l Can, 948 F.2d at 1269).” slip op. at 28
Patent outcomesUS 10,850,616 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,850,616 - Askeladden, L.L.C. v. Ohva, Inc.All claims unpatentablePTAB · Mar 10, 2025 · IPR2023-00921 · APJ Amee A Shah · IPR · Final written decision
Claims 1–4 are unpatentable as obvious: claim 1 over Cho, Aaron, and Carpenter; claim 2 over those references and de Geer; claim 3 over Cho and Aaron; and claim 4 over Cho, Aaron, and de …
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“application are similar, as indicated by the redline comparison of two provided as Exhibit 1015. Critically, however, the “Summary of the Invention” sections are completely different. Id. at 2–4. The question is whether one of ordinary skill in the art would have understood with reasonable clarity, without the benefit of the Summary added for the ’286 patent/’674 application, that the ՚030 application describes a smart telephone that executes coded instructions to “convert the analog variable voltage audio signal received at the microphone port to the transaction data as digital data.”” slip op. at 43
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“Here, although the ’286 patent distinguishes “account data” from “transaction data” in the embodiment of Figure 11, the “transaction data” is submitted by the user to perform a series of banking transactions after manually entering a PIN code, whereas the “account data” is stored on the server, and the token information is accepted from the smart card’s 1001, 10:12–18, 10:30–35, 10:40–42, 11:21–22, 11:65–12:4, 12:22–36. Thus, the claimed “transaction data” that is “accepted . . . from an output interface of a transaction card” and “accepted . . . from a transaction card at an input interface of the card reader,” as recited in independent claims 1 and 3, comprises data stored on and read from a card, such as an ID number, password, authentication information, or session information, that can be used to facilitate a transaction. The evidence indicates that the claimed “transaction data” is distinct from the “transaction data B1-Bn” described in connection with the Figure 11 embodiment.” slip op. at 24
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“As discussed above in Section II.C, we construe the term “transaction data” as encompassing any data involved in a transaction, including account data. Again, we emphasize that claim 1 requires that the transaction data is accepted by the card reader from an output interface of the transaction card. Cho provides that card reader 230 reads a digital signal that includes account information of card 130 whereby the account information “may include at least one of an account number, a card expiration data, etc.” Ex. 1005, 5:54–58. We further agree with Petitioner that to the extent “transaction data” is for the purpose of conducting banking transactions, Cho’s account data of a credit card number and expiration date can perform that purpose. Patent Owner’s arguments that the transaction data cannot be “static” and that claim 1 requires “processing actual transaction-specific data” are not commensurate with the scope of the claim 1. The claim does not recite any limitations that the transaction data be dynamic or “not static,” nor does it recite any processing of the transaction data outside of using it to “facilitate transactions.” Petitioner has shown that Cho teaches the claimed transaction data.” slip op. at 55
Patent outcomesUS 9,679,286 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 9,679,286 - PTAB · Nov 22, 2024 · PGR2024-00034 · APJ Patrick R Scanlon · PGR · Institution
Instituted PGR on claims 1–19 and all asserted grounds after finding at least one claim more likely than not unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority to determine whether to institute a post-grant review. See 35 U.S.C. § 324 (2018); 37 C.F.R. § 42.4(a) (2022). To institute a post-grant review, we must determine that “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that the information presented shows that it is more likely than not that Petitioner would prevail in establishing unpatentability of at least one challenged claim. Accordingly, we institute a post-grant review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We note that the identification of a Ph.D. as an example of “more formal education” creates a vast range of education relative to a bachelor’s degree. Thus, we treat the identification of a Ph.D. just as it is—an example—and not a requirement. In this case, “more formal education” can be satisfied by a level of education less than a Ph.D (but greater than a bachelor’s degree). Based on our review of the record before us, we determine that Petitioner’s stated level of ordinary skill in the art is reasonable because it appears consistent with the evidence of record, definition, limited as discussed above, for the purposes of this Decision.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the present record, we do not discern a need to construe explicitly any claim language because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“would have understood Unger’s disclosure to “suggest the use of a torsion spring to facilitate attachment and detachment, because torsion springs are designed to impart this functionality.” Id. (citing Ex. 1002 ¶ 118). Petitioner also asserts that one of ordinary skill in the art would have “understood that there were a limited number of ways to impart the referenced resilient or flexible ‘manipulation,’” and “would have been motivated to look to various known solutions to impart the suggested functionality, including the torsional spring mechanism of Smith that is used in a similar hearing protection device application for a similar purpose as Unger’s mounting arms (to apply a clamping force).” Id. at 32 (citing Ex. 1002 ¶¶ 120–121).” slip op. at 17
Claim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,736,855 - Maplebear Inc. D/B/A Instacart v. Consumeron, LLCAll claims unpatentablePTAB · Nov 20, 2024 · IPR2023-00865 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–19 are unpatentable under § 103 over Carr and Lauka, with additional references for the dependent-claim grounds, because the challenged claims lack priority support in the ’848 application.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Instacart submits that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of electronic commerce” and that “[l]ack of work experience can be remedied by additional education, and vice versa.” Pet. 27 (citing Ex. 1003 ¶¶ 22–25). Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” PO Resp. 7 (citing Ex. 2016 ¶¶ 19–23). But, as Consumeron’s expert acknowledges, Consumeron’s proposed definition “is not materially different” from Instacart’s. See Ex. 2016 ¶ 22. Accordingly, while we adopt the level of skill in the art as defined by Instacart our findings and analysis would be the same under Consumeron’s proposal.” slip op. at 7
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“8 Consumeron argues Dr. Houh’s testimony should be given little weight because he “admitted he did not evaluate what the ’848 Application reasonably conveys to a skilled artisan.” Resp. 26 (citing Ex. 2011, 74:8– 76:6, 83:4–84:1, 92:22–95:5). We disagree. Dr. Houh’s testimony indicates that he properly considered what the ’848 application reasonably conveys to a POSITA. See Ex. 1003 ¶¶ 52, 56, 58, 61, 65. The portions of his cross-examination testimony cited by Consumeron do not suggest otherwise. For the reasons explained below, we credit Dr. Houh’s testimony over the competing interpretations offered by Consumeron and Dr. Mitzenmacher. 9 The dissent criticizes the majority’s analysis as “overly narrow” and too focused on the preferred embodiment. See Dissent 7–8. We disagree. Our analysis considers the entirety of the ’848 application, including all of the passages cited by Consumeron and the dissent.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“But it does not follow that an agent encountering a stock-out would necessarily respond according to the specific steps recited in claims 1 and 14.10 For example, instead of sending information about a replacement product, the agent could travel to another location to look for the same product, or notify the customer that the desired product could not be found and terminate the transaction. Because the ’848 application only contemplates scenarios where a product can be located, it does not describe the agent’s response in the event the identified product cannot be located or is unavailable, much less reasonably convey possession of a method comprising the specific, responsive steps in claims 1 and 14.11” slip op. at 17
- Prior constructionPrior construction adoptedTerm construed petitioner constructionDecided for petitioner
“construed the terms “acquisition request” and “acquiring” in our final written decision in the related 1357 IPR to encompass “not only a request for a delivery agent to shop for and purchase goods, but also a request for the agent to pick up or obtain pre-paid goods.” See 1357 IPR, Paper 35 at 11. It is undisputed that the ’465 patent at issue here and the ’835 patent at issue in the 1357 IPR are related and share essentially identical specifications, figures, and claim terms. See Pet. Reply 16; PO Resp. 38 n.6. Thus, for the same reasons as in our final written decision in the related 1357 IPR, we likewise determine here that Instacart’s construction of “acquisition request” is the correct one. See SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents ‘derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.’” (quoting NTP, Inc., v. Research in Motion, Ltd., 418 F.3d 1282, 1293 (Fed. Cir. 2005)). Consumeron provides no persuasive justification for us to depart from our prior reasoning in the related 1357 IPR.” slip op. at 23
Patent outcomesUS 11,238,465 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 11,238,465 - PTAB · Nov 14, 2024 · PGR2024-00026 · APJ Hyun J Jung · PGR · Institution
Instituted PGR on claims 1–7 and all grounds because Petitioner showed it was more likely than not that at least one challenged claim lacks written-description support.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this stage, Petitioner’s arguments, cited portions of the Specification, and supporting testimonial evidence demonstrate that it is more likely than not that claims 1–7 are unpatentable.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateDecided for petitioner
“patent describes that “angular position transducer 78 is placed on top of swing leg pivot shaft 24” and that “pivot shaft 24 is rotationally fixed to the connector plate and duplicates the angular movements of swing leg 20 about the pivot shaft.” Ex. 1001, 12:15–16, 12:20–22, Figs. 5, 7. The ’723 patent also describes that “[a]ngular position transducer 78 is mounted inside . . . protective can 90 . . . which is bolted to hinge bracket 28 via an upright holding arm 92” and that “trigger pin 94 projects upwardly from the top surface of pivot shaft 24 and cooperates with angular position transducer 78 to generate an angular position signal.” Id. at 12:28–33, Fig. 5. These descriptions expressly convey that angular position transducer 78 is on pivot shaft 24 and mounted inside protective can 90 that is bolted to hinge bracket 28. Id. at 12:15–16, 12:20–22, 12:28–30, Figs. 5, 7; see also Prelim. Resp. 17 (describing the same embodiment shown in Figs. 5 and 7). According to Petitioner, the ’723 patent describes the pivot shaft as part of the hinge bracket, not the modular frame or swing leg. Pet. 109–110 (citing Ex. 1001, 7:42–46, 12:17–22). On the preliminary record, we agree because the cited portions of the Specification describe that a “hinge bracket is interposed between each swing leg and an associated surface of the bolsters and includes a fixed, upright pivot shaft that pivotally engages the swing leg for pivotal movements” and “pivot shaft 24 is rotationally fixed to the connector plate.” Ex. 1001, 7:42–45, 12:20–21. We also agree that “even if one were to find that the hinge bracket is part of either the modular frame or swing leg (contrary to the claims and specification treating these all as separate components), the specification would only provide written description for one of the claimed alternatives.” Pet. 110 (citing Ex. 1002 ¶ 199).” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this preliminary stage, we determine that express claim interpretation is not necessary to determine whether it is more likely than not that at least one of the claims challenged in the petition is unpatentable. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We will also not use our discretion under § 325(d) to deny the Petition based on arguments previously presented in IPR2021-00135, because Petitioner relies on a Board determination regarding claim 8 from IPR2021- 00136, not arguments previously made for claim 1 in IPR2021-00135. Pet. 111–115, 119; Prelim. Resp. 8–9; Prelim. Sur-reply 5. Furthermore, we determined the effective filing date of claim 8 of the ’571 patent without deciding, that other challenged claims, such as claim 1, were entitled to their earliest possible effective filing date. See Godberson-Smith, Paper 61 at 11, 12.” slip op. at 12
Claim construction§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,772,723 - PTAB · Aug 16, 2024 · IPR2023-00658 · APJ Scott A Daniels · IPR · Final written decision
The Board canceled original claim 1, denied the proposed substitute claim as indefinite under § 112, and did not reach the asserted obviousness grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We have, on the complete record now before us, mainly the testimony of Petitioner’s declarant, Mr. Hatch, who testifies that the designer of ordinary skill in the art would be a person who has a bachelor’s degree in furniture design or an equivalent field or alternatively two years of practical experience designing furniture . . . [which] is appropriate given the relatively simple nature of the design at issue, which involves little more than two boards forming a tabletop. Ex. 1002 ¶¶ 34–35. Based on the complete record, we adopt Petitioner’s articulation of a designer of ordinary skill as it is supported by the testimony of Mr. Hatch. Id. ¶¶ 33–38. We also note that, based on the complete trial record, our” slip op. at 18
- Expert testimonyPetitioner expert creditedDecided for petitioner
“In contrast, Patent Owner’s declarant, Mr. Williams, testifies based on his “experience[,] that tenons are generally included in the larger portion of two table top portions.” Ex. 2006 ¶ 55. However, Mr. Williams’ experience does not explain why an ordinary observer would understand such functional and ornamental characteristics of tenon and hole arrangements. Id. Nor does this testimony proclaim that tenons must be in the larger of two table top potions. Indeed, even considering an ordinary observer imbued with Mr. Williams’ level of expertise and experience, and understanding for instance that it may be more likely that the wider portion includes tenons, this does not resolve the glaring inconsistency that Figure 1 illustrates holes and Figure 8 illustrates tenons. In other words, Mr. Williams’ “experience” does not resolve the visible tension that, on one hand, Figure 1 illustrates holes as part of the claimed ornamental design in the wider portion of the table top, and on the other hand, Figure 8 illustrates tenons as part of the same wider portion of the table top. The problem here may be more eloquently explained as “Two roads diverged in a yellow wood[,] And sorry I could not travel both.” Robert Frost, The Road Not Taken, The Poetry of Robert Frost—The Collected Poems, 105, Henry Holt and Co. (1969). Considering the entire record before us in this case we credit Mr. Hatch’s testimony. The issue is not, as Patent Owner has framed it, whether “[o]ne of ordinary skill in the art would understand how the tenons and holes should be positioned on each of the table top portions.” Reply Opp. 7. The question is whether a person of ordinary skill in the art viewing the design for a table top in the proposed substitute claim as would an ordinary observer, understand whether or not the wider portion of the table top as Figures 1 and 6, holes. As Mr. Hatch persuasively explains, in the proposed substitute claim a majority of the drawings for the wider portion, i.e., Figures 1–6, omit the tenons added in Figure 8. Ex. 1011 ¶ 37 (Mr. Hatch testifying that “Figure 8 is the only amended figure that adds tenons/dowels.”) Indeed, Figures 1 and 6 not only fail to illustrate tenons, but actually are amended to include holes rather than tenons, as described in the Motion to Amend. See, e.g., Motion to Amend 6 (Patent Owner describing, “Figure 1: Removal of disclaimer of a total of four holes by amending the outline of the four holes from broken lines to solid lines.”). On the complete record in this proceeding, we determine that a” slip op. at 28
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“On the complete record in this proceeding, we determine that a designer of skill in the art considering the claim from either their own, or the perspective of an ordinary observer, would be uncertain whether the wider portion of the claimed table top depicted in Figures 1–8 includes tenons, or holes. It is reasonable that anyone observing two distinct ornamental designs for the same wider portion of the table top would be unclear as to the claimed ornamental design where holes are shown in one figure but tenons are shown in another figure illustrating the same wider portion of the table top. Observing as a whole, the figures illustrating the table top in the proposed substitute claim, the question remains, does the wider portion of the table top include tenons, or holes? See Maatita, 900 F.3d at 1376 (“Ultimately, a patent is indefinite for § 112 purposes whenever its claim, read in light of the visual disclosure (whether it be a single drawing or multiple drawings), ‘fail[s] to inform, with reasonable certainty, those skilled in the art about the scope of the invention.’”) (quoting Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898 (2014)). proposed substitute claim fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” See Nautilus, 572 U.S. at 910. Thus, Petitioner has shown, by a preponderance of the evidence, that the proposed substitute claim is indefinite and we accordingly deny Patent Owner’s Noncontingent Motion to Amend.” slip op. at 29
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteUnpatentable
“Federal Circuit recently explained that “a design patent is indefinite under § 112 if one skilled in the art, viewing the design as would an ordinary observer, would not understand the scope of the design with reasonable certainty based on the claim and visual disclosure.” In re Maatita, 900 F.3d 1369, 1377 (Fed. Cir. 2018). In Maatita, the Federal Circuit reversed the Board’s finding of indefiniteness of a design for a shoe bottom, i.e., a shoe sole, finding that Maatita’s two-dimensional drawing clearly demonstrates the perspective from which the shoe bottom should be viewed. A potential infringer is not left in doubt as to how to determine infringement. In this case, Maatita’s decision not to disclose all possible depth choices would not preclude an ordinary observer from understanding the claimed design, since the design is capable of being understood from the two-dimensional, plan- or planar-view perspective [] shown in the drawing. Id. at F.3d 1378–79. Different from Maatita, the issue in this proceeding is not whether an ordinary observer would sufficiently understand a three-dimensional ornamental design from a two-dimensional figure, but whether inconsistencies between figures of the proposed substitute claim render the scope of the claimed table top uncertain. See Maatita, 900 F.3d at 1376 (The Federal Circuit specifically distinguishing Maatita’s single two-dimensional drawing from indefiniteness issues raised by inconsistent drawings: “[h]ere, we are not dealing with inconsistencies in the drawings, or inconsistencies between the drawings and the verbal description, but” slip op. at 24
§ 103 obviousness§ 112 disclosurecites Nautilus - Bj’S Wholesale Club Holdings, Inc. v. Walmart Apollo, LLCAll claims unpatentablePTAB · Apr 10, 2024 · IPR2022-01564 · APJ Patrick R Scanlon · IPR · Final written decision
Claims 1–14 are unpatentable as anticipated by Keith; the Board did not reach the alternative obviousness ground over Hanson and Keith.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“claims of the later-filed application must be supported by the written description in the parent ‘in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.’” Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1335 (Fed. Cir. 2010) (quoting Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997)). “[T]he hallmark of written description is disclosure,” and the test “is whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date” of that application. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc) (citing Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1562–63 (Fed. Cir. 1991)). “[T]he test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. But, “[i]t is not sufficient for purposes of the written description requirement of [35 U.S.C.] § 112 that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood, 107 F.3d at 1572.” slip op. at 33
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. Inc., v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). Moreover, “[b]ecause the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). Whether a reference anticipates is assessed from the perspective of an ordinarily skilled artisan. See Dayco Prods., Inc. v. Total Containment, Inc., 329 F.3d 1358, 1368 (Fed. Cir. 2003) (“‘[T]he dispositive question regarding anticipation [i]s whether one skilled in the art would reasonably understand or infer from the [prior art reference’s] teaching’ that every claim element was disclosed in that single reference.”). slip op. at 13
- BurdenFwd all claims unpatentableDecided for petitioner
“preponderance of the evidence that the claims are unpatentable. 35 U.S.C. § 316(e) (2018); 37 C.F.R. § 42.1(d) (2022). “In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review).” slip op. at 12
Patent outcomesUS 10,803,435 unpatentable§ 102 anticipation§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,803,435 - Askeladden, L.L.C. v. Ohva, Inc.Rehearing grantedPTAB · Mar 15, 2024 · IPR2023-00921 · APJ Amee A Shah · IPR · Rehearing
Granted petitioner’s rehearing request and instituted IPR of claims 1–4 on all asserted grounds, finding a reasonable likelihood of prevailing based on the preliminary construction of “transaction data.”
RulingsRehearing decision- RehearingRehearing, grantedGranted
“institute has the burden of showing the decision should be modified, and the request for rehearing must specifically identify all matters the party believes the Board misapprehended or overlooked and the place where each matter was previously addressed in its papers. 37 C.F.R. § 42.71(d). “When rehearing a decision on petition, a panel will review the decision for an abuse of discretion.” Id. § 42.71(c).” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“Although the ’286 patent distinguishes “account data” from “transaction data” in the embodiment of Figure 11, the “transaction data” is submitted by the user to perform a series of banking transactions after manually entering a PIN code, whereas the “account data” is stored on the server, and the token information is accepted from the smart card’s embedded token, i.e., the output interface of the transaction card. See Ex. 1001, 10:12–18, 10:30–35, 10:40–42, 11:21–22, 11:65–12:4, 12:22–36. Thus, the claimed “transaction data” that is “accepted . . . from an output interface of a transaction card” and “accepted . . . from a transaction card at an input interface of the card reader,” as recited in independent claims 1 and 3, comprises data stored on and read from a card, such as an ID number, password, authentication information, or session information, that can be used to facilitate a transaction. Such claimed “transaction data” is distinct from the “transaction data” described in connection with the Figure 11 embodiment. We therefore do not limit the claimed “transaction data” and instead preliminarily construe that term as encompassing any data involved in a transaction, including account data. As described above, the claimed transaction data must come from the output interface of a transaction card. Should either party believe that a different construction should apply in the instituted trial, it should explain the proposed construction, how the construction is supported by the record, and how the construction affects our unpatentability analysis.” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Entitled to earlier dateInstituted
“The dispute relates to whether the ’030 application describes the claimed “smart telephone” accepting transaction data and executing coded instructions to convert the analog signal to digital data representing transaction data as digital data. See Pet. 14–15, 19–27. In Petitioner’s view, that term is supported only by language added to the “Brief Summary of the Invention” during prosecution of the application resulting in the ’286 patent. Id. at 17. In contrast, argues Petitioner, the corresponding section of the ’030 application instead describes transmitting sound to a PC, not a smart telephone. Id. at 19–26. Patent Owner submits that the ’030 application describes generating sounds from a smart phone and using a “key jack sound pass generator” to communicate sounds. Prelim. Resp. 16. Patent Owner contends that the claim language is supported by disclosure of receiving the audio signal at a microphone port and converting the signal to transaction data. Id. at 16–18. Patent Owner points also to description of direct communication between a “client device” and server. Id. at 19. On the present record, we find that Petitioner, at this stage in the proceeding, has shown sufficiently how it contends that the earliest possible effective filing date for claims 1–4 of the ’286 patent is March, 3, 2015, such that the Cho, Aaron, Carpenter, and de Geer references qualify as prior art. Patent Owner has identified a factual dispute regarding the significance of the ’030 application’s disclosures, and we view that dispute as best resolved through trial.” slip op. at 9
- PTAB / AIA Trials › Real party in interest / privityDecided for petitioner
“35 U.S.C. § 312(a)(2) provides that one of the “Requirements of Petition” is that “the petition identifies all real parties in interest.” “Whether a non-party is a RPI is a ‘highly fact-dependent question’ and must be considered on a case-by-case basis.” SharkNinja Operating LLC. v. IROBOT Corp., No. IPR2020-00735, 2020 WL 6050687, at *4 (PTAB Oct. 13, 2020) (precedential) (citing Ventex Co. v. Columbia Sportswear N. Am., Inc., IPR2017-00651, Paper 148 at 6 (PTAB Jan. 24, 2019) (Paper 148) (precedential) (citing Office Trial Practice Guide, 77 Fed. Reg. 48,756, 48,759 (Aug. 14, 2012))). Here, addressing whether TCH is an unnamed RPI would not create a time bar or estoppel under 35 U.S.C. § 315. There is no allegation or evidence that TCH is “barred or estopped from this proceeding or that Petitioner purposefully omitted [TCH] to gain some advantage.” SharkNinja at *4. Rather, Patent Owner argues that for “once again willfully fail[ing] to identify TCH as a real party in interest, . . . the Petition should be denied on that basis.” Prelim. Resp. 7. In other words, Patent Owner contends only that we deny institution because of “the alleged failure of a procedural requirement that can be corrected under our precedent.” SharkNinja at *4. We understand that” slip op. at 11
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 9,679,286
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.