• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-00532 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–16 are unpatentable under § 103 over Warren, Warren and Dunn, Calderon and RepRap20208, and Calderon, RepRap20208, and Dunn.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “of ordinary skill in the art would have made the proposed combination in the manner asserted with a reasonable expectation of success. Weighing our underlying factual determinations, a preponderance of the evidence persuades us that claim 7 of the ’381 patent is unpatentable over Calderon, RepRap20208, and Dunn. Arctic Cat, 876 F.3d at 1361.” slip op. at 108

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). Whether a document qualifies as a printed publication is a legal conclusion based on underlying factual determinations. Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). slip op. at 69

  Patent outcomesUS 10,556,381 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,556,381
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Some claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00531 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–11 and 13–15 are unpatentable over the stated obviousness grounds; claim 12 was not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Petitioner filed a Petition (Paper 2, “Pet.”) requesting institution of an inter partes review of claims 1–15 of the ’698 patent. Discretionary denial of institution was determined to be not appropriate in this proceeding, and the proceeding was referred to the Board. Paper 10. Pursuant to 35 U.S.C. § 314, we instituted an inter partes review of claims 1–15 of the ’698 patent on all presented challenges. Paper 11 (“Inst. Dec.”), 15.” slip op. at 2

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Decision is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73 (2025). For the reasons that follow, we determine that Shenzhen Tuozhu Technology Co., Ltd. (“Petitioner”) has shown by a preponderance of the evidence that claims 1–11 and 13–15, but not claim 12, of U.S. Patent No. 9,168,698 B2 (Ex. 1001, “the ’698 patent”) are unpatentable.” slip op. at 2

  Patent outcomesUS 9,168,698 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,168,698
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Apple Inc. v. Smart Mobile Technologies LLCSome claims unpatentable
  PTAB · Jun 3, 2026 · IPR2022-00981 · APJ Jameson Lee · IPR · Remand

  On remand, claims 8–11, 13, 17, and 19 were held unpatentable over Rautiola, Regnier, and Sainton; claim 15 was not shown unpatentable.

  RulingsRemand decision

  • RemandMixed

    “8–11, 13, 15, 17, and 19, and remanded “for consideration of the patentability of those claims.” Id. at 14. We understand both the reversal and vacature are with respect to Ground 1 of alleged unpatentability, not Ground 2, because the Federal Circuit’s decision did not discuss anything relating to Ground 2. Paper 43. The parties agreed. Paper 44. In this remand proceeding, neither party requested the filing of additional briefing or evidence. In a telephone conference call, both parties expressed agreement with the Board (1) that “there is no issue regarding collateral estoppel or issue preclusion with respect to dependent claims 8– 11, 13, 15, 17, and 19, and (2) that the remand proceeding would not involve the Board revisiting any matter or issue concerning alleged obviousness of claims 1, 8, 9, 11, 13, 17, and 19 over Ground 2.4 Papers 43, 44. The parties also agreed that the remand proceeding would only involve the Board reviewing the alleged obviousness of dependent claims 8–11, 13, 15, 17, and 19 as obvious over Rautiola, Regnier, and Sainton. Id. We have authority to conduct this inter partes review under 35 U.S.C. § 6. This Final Written Decision on Remand is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. On the record before us, which is the same as the record before us at the time we issued the first final written decision (Paper 34), we determine that Petitioner has proved by a preponderance of the evidence that claims 8– 11, 13, 17, and 19, but not claim 15, of the ’936 patent are unpatentable over Rautiola, Regnier, and Sainton.” slip op. at 3

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “5. Petitioner’s Request to Discredit Dr. Cooklev’s Declaration Petitioner makes several arguments discrediting Dr. Cooklev’s declaration (Ex. 2031) and asserts that Dr. Cooklev’s declaration should be accorded little to no weight. Reply 13–14. We have already considered and rejected this request in the Final Written Decision issued on November 7, 2023. Paper 34, 21–23. Our reasoning need not be reiterated here. Petitioner does not persuade us that Dr. Cooklev’s declaration testimony should be accorded little to no weight.” slip op. at 15

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute Petition’s definition of level of ordinary skill. See generally PO Resp. Patent Owner’s expert, Dr. Cooklev, accepts Dr. Kotzin’s proposed level of ordinary skill in the art. Ex. 2031 ¶ 24. We adopt Petitioner’s proposal regarding the level of ordinary skill in the art. This level of ordinary skill in the art is supported by the testimony of Dr. Kotzin (Ex. 1003 ¶¶ 20–22) and is consistent with the level reflected in the ’936 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “only when it is analogous to the claimed invention.” Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1379 (Fed. Cir. 2019). A prior art reference constitutes analogous art if it is “from the same field of endeavor” or “reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). The petitioner bears the burden of establishing that a reference is analogous art. See Sanofi-Aventis Deutschland GmbH v. Mylan Pharms. Inc., 66 F.4th 1373, 1377 (Fed. Cir. 2023).” slip op. at 16

  Patent outcomesUS 8,472,936 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,472,936
• Trove Brands, LLC v. Camelbak Products, LLCSome claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00140 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6 are unpatentable as obvious; claims 7–18 were not shown unpatentable because Ribarits does not disclose a mouthpiece disposed on the pivotal mount.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 15 (citing Ex. 1002 ¶ 25). While CamelBak offers “a similar, though slightly different level,” it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision in this proceeding.” PO Resp. 27. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is 2 JP 2002-211613A, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 WO 2004/063042 A2, published July 29, 2004 (Ex. 1006, “Ribarits”). 4 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 5 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1008, “Hughes”). reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’250 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We will not bite. CamelBak’s original assertion—that the plain and ordinary meaning of the constituent parts of “mouth” and “piece” is “a piece (or part) that goes in the mouth”—underscores the fallacy of CamelBak’s additional physical contact requirement. PO Resp. 28 (emphasis added). Indeed, in support of that earlier assertion, CamelBak pointed to the very dictionary definition that we relied on at institution in construing “mouthpiece” as a part that either “goes in the mouth or to which the mouth is applied.” See id. at 31 (citing Ex. 2005 (emphasis added)). Even the original testimony of CamelBak’s own expert confirms that one skilled in the art “would understand that the term ‘mouthpiece’ is commonly known in the art as a part designed for a user’s mouth,” without any requirement for physical contact with the mouth. Ex. 2016 ¶ 58 (citing Ex. 2005) (emphasis added)). And nothing in the Specification limits that common understanding. Although, indisputably, the Specification contemplates an embodiment where the user physically contacts the mouthpiece with their teeth (i.e., a bite-actuated mouthpiece), it also contemplates an embodiment where the user simply inserts the bottle in their mouth and commences fluid flow by squeezing it. See Ex. 1001, 10:9–13. That disclosure supports a meaning of “mouthpiece” that simply requires placement in the opening of the user’s mouth without necessarily incurring physical contact with some portion of the mouth, such as the teeth, tongue, or lips. Indeed, had CamelBak wished to premise the meaning of “mouthpiece” on some sort of physical contact with the mouth, it knew how to do so. For instance, the independent claims of CamelBak’s earlier ’255 patent, which is the subject of the related 1137 IPR, are limited in just such a manner, as they recite “wherein the resilient mouthpiece is adapted to resiliently compress responsive to compressive forces applied to the resilient mouthpiece by a user’s teeth.” Ex. 2023, at 20–25 (emphasis added). Thus, we reject CamelBak’s attempt to narrow our construction of “mouthpiece” to something other than “a part (as of an instrument) that goes in the mouth or to which the mouth is applied.” Neither the intrinsic nor extrinsic evidence supports the narrower construction proposed by CamelBak.” slip op. at 11

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In reply, Trove argues that CamelBak’s “novel” construction that the mouthpiece moves with rotational motion about that same axis of rotation defined by the two joint as the pivotal mount and in the same direction as the pivotal mount “are inconsistent with the claim language’s plain and ordinary meaning and find no support in the intrinsic and extrinsic record.” See Pet. Reply 16. But, because we find that, when properly construed, the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis” requires that the mouthpiece rotate about the same axis and in the same direction as the pivotal mount, we reject Trove’s argument as unavailing. And, although we agree with Trove that Nakajima’s mouthpiece engages in counter-clockwise rotation about a “Second Pivot Axis” when Nakajima’s lid 4 is opened (id. at 20–22), that rotation is about a different axis—one defined by Nakajima’s protrusions 24 rather than the claimed “pivotal axis” defined by Nakajima’s hinge shafts 19—and in a different manner—an upward and counterclockwise path rather than the claimed “pivotal movement with the pivotal mount” defined by Nakajima’s lid 4. Finally, in an alternative theory, Trove and its expert use “image- manipulation tools” in an attempt to show that Nakajima’s mouthpiece engages in some initial “clockwise-rotation” with Nakajima’s lid as it is opened. See Pet. Reply 18–24. We reject that theory as entirely conjectural and unsupported by the evidence.” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We disagree. As discussed above, the proper construction of “for pivotal movement with the pivotal mount” requires that the mouthpiece mirror the rotational movement of the pivotal mount, i.e., rotate about the same axis as the pivotal mount and in the same direction as the pivotal mount. See supra § II.B.3. But Nakajima’s mouthpiece does neither, and, thus, does not exhibit the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis for . . . the pivotal mount axis,” as properly construed.” slip op. at 36

  Patent outcomesUS 11,851,250 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 11,851,250
• Motorola Mobility LLC / Google LLC v. Multifold International Incorporated Pte. Ltd.All claims unpatentable
  PTAB · Apr 28, 2026 · IPR2025-00040 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–9 are unpatentable: claims 1–4 and 6–9 as anticipated or obvious over the asserted references, and claim 5 as obvious over Yook or Yook in view of Purcell.

  RulingsFinal written decision

  • BurdenDecided for petitioner

    “We disagree with Patent Owner’s argument because the Petition presents argument and evidence that substantively demonstrates, with clarity and particularity, how and why each reference discloses, teaches, suggests, or otherwise renders obvious the displaying element recited in limitation 1[B]. We agree with Petitioner that “Patent Owner neglects to address the actual substance of the Petition, which clearly addresses this limitation with respect to each reference.” Reply 1–2. The Petition addresses in detail how each asserted reference discloses displaying two applications on two separate displays in accordance with the displaying element, by presenting multiple annotated figures from Yook, Lee, Aguilar, and Purcell. Pet. 27–30, 47–50, 62–63, 77–78. The Petition also cites and quotes the accompanying descriptions for the annotated figures from each prior art reference as well as explanatory expert opinion testimony from Dr. Rodriguez. Id. (citing Rodriguez Decl. Ex. 1003 ¶¶ 70–74, 119–122, 149–150, 182–183; Yook Ex. 1004 ¶¶ 47, 51, 58, 96–101, Figs. 4b, 4d, 5; Lee Ex. 1005 ¶¶ 48–53, Figs. 4, 6, 9, 10; Aguilar Ex. 1006, 7:1–7, Figs. 5–5d; Purcell Ex. 1007 ¶ 16, Fig. 2). We provide detailed examples below of how the Petition maps Yook and Lee onto the displaying element of limitation 1[B] in compliance with the particularity requirement of 35 U.S.C. § 312(a)(3); 37 C.F.R. § 42.104(b)(4). Although we do not provide detailed examples directed to Aguilar and Purcell, we find the Petition maps Aguilar and Purcell onto the displaying element of limitation 1[B] in compliance with the particularity requirement of 35 U.S.C. § 312(a)(3) and 37 C.F.R. § 42.104(b)(4).” slip op. at 14

  • Strike new argumentNew argument disregardedDecided for petitioner

    “Instead, Patent Owner chose to raise an entirely new theory of patentability. Sur-Reply 3–13; Tr. 28:8–20. Patent Owner’s new theory is based on a claim construction that construes claim 1 of the ’756 patent as “recit[ing] a specific order of steps that must be performed in the order written.” Id. at 3–4. “Because of this order, the [displaying element] must occur after both (two) ‘selecting’ steps,” and Patent Owner contends none of the prior art references asserted in the Petition “meets the order required by claim 1.” Id. at 4. We will not consider Patent Owner’s new theory of patentability raised for the first time in its Sur-Reply. See Apple Inc. v. e-Watch, Inc., IPR2015-00412, Paper 50, 44 (PTAB May 6, 2016) (“‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean embark in a new direction with a new approach”); see also Optivus Tech., Inc. v. Ion Beam Appl’ns S.A., 469 F.3d 978, 989 (Fed. Cir. 2006) (argument raised for the first time in the reply brief, which could have been raised in the opening brief, is waived). Patent Owner should have raised its “specific order of steps” argument in the Response. By failing to do so, Patent Owner has waived the argument. Id.” slip op. at 22

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Third, we are further persuaded by Dr. Surati’s testimony that the wave shape visual indicator depicted in Figures 10A–C of the ’756 patent indicates that a user can do something, but not necessarily what that something is (e.g., minimizing or maximizing). Id. at 17 (citing Ex. 1012, 200:1–6). It is telling that Dr. Surati testified that only through repeated use and exposure would a user recognize a relationship between a wave shape and the functions of maximizing or minimizing an application. Id. (citing Ex. 1012, 197:13–199:22). We are also persuaded by Dr. Rodriguez’s testimony regarding the teachings of Yook: Yook therefore teaches giving users the ability to transition a split-screen application back into full screen mode. Further, a POSITA would have understood that this ability would undoubtedly be implemented in the form of a visual indicator, which, from the 2000s to today, is the industry’s universal method of alerting a user to an accessible function. . . . Ex. 1003 ¶ 107 (emphasis added); For claim 5, Yook discloses many different types of “icons” that are used to receive user gesture inputs. See, e.g., Figs. 1, 4e, 5a, 5c, 5d, 6, 7a, 7b, 7c, 8, 9, 10, 11, 12, 13. Examples of these icons are displayed below: Id. ¶ 108; and A POSITA would have understood that Yook’s icons can have a wave shape because the shape taken by a visual indicator, or icon, is merely a matter of common and routine design choice. Indeed, the shape of an icon does not affect its function or how a gesture input is received. Id. ¶ 109 (emphasis added). In short, we are persuaded Petitioner has established by a preponderance of the evidence that a displayed visual indicator that “has a wave shape” is a design choice not affecting the function of the visual indicator, and a visual indicator that “has a wave shape” would have been an obvious design choice to a POSITA in view of Yook.” slip op. at 30

  • Skill levelSkill level board ownDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and experience of a POSITA. We adopt the parties’ agreed level of ordinary skill in the art, which is consistent with the description in the ’756 patent and the prior art of record.” slip op. at 9

  Patent outcomesUS 9,134,756 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 9,134,756
• Google LLC / Motorola Mobility LLC v. Multifold International Incorporated Pte. Ltd.All claims unpatentable
  PTAB · Apr 22, 2026 · IPR2025-00060 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 2, 4–9, 12–16, and 20 are unpatentable: claims 1, 2, 12, 13, and 20 as anticipated by Ogawa, and claims 4–9 and 14–16 as obvious over the stated combinations.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Claim 1 also recites “wherein the first and second states comprise an open application state.” Given the usage of “comprise” in this clause, we determine that the possible first and second states must include an open application state but the states are not limited to an open application state. Claim 12 similarly recites a processor that is operable to “displaying an icon associated with the application in at least one of the first display and the second display, wherein the icon indicates that the application is in one of two or more states associated with a display status of the application” and “wherein the first and second states comprise an open application state.” Ex. 1001, 16:12–19. Given the usage of “comprise” in these clauses, we determine that the first and second states must include an open application state but are not limited to an open application state that is being displayed in the corresponding display status as argued by Patent Owner. Patent Owner’s proposed construction, which requires the application to be “open and being displayed in the corresponding display condition/status,” further narrows the wherein clauses of claims 1 and 12 which do not require the application to be open and displayed. In fact, Patent Owner’s declarant, Dr. Surati, testified that the applications have multiple states and are not limited to open application states. Ex. 1016, 50:4–51:4. Patent Owner does not cite to an any portion of the Specification or prosecution history in support of its construction. PO Resp. 7–9.” slip op. at 13

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had an undergraduate degree in electrical engineering, computer engineering, computer science or a related field along with two years of work experience in the field of user interface technologies, including e.g., graphical interface technologies, or a related field. . . . More education can supplement practical experience and vice versa. Pet. 5–6 (citing Ex. 1002 ¶¶ 20–21). Patent Owner applies Petitioner’s definition of a person of ordinary skill in the art. PO Resp. 10. We apply Petitioner’s uncontested definition because it appears consistent with the problems addressed in the ’080 patent and the prior art.” slip op. at 10

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “For the following reasons, we find that Petitioner establishes that Ogawa discloses this limitation. Patent Owner’s contentions are not responsive to Petitioner’s mapping of Ogawa to claim limitation [1.f]. This claim limitation recites that “the morphing comprising changing the shape and size of the icon.” Ex. 1001, 15:4–7. Petitioner relies on the size and shape of access bar 42 changing as shown by a comparison of Ogawa’s Figure 4(B) and Figure 4(C). Pet. 24– 25. Patent Owner does not dispute that the size and shape of access bar 42 changes from Figure 4(B) to Figure 4(C). See PO Resp. 10–16. Patent Owner focuses on the color of access bar 42 shown as cross- hatching in Figure 4 to argue that the icon does not represent the state of the application. PO Resp. 12–14. However, the color of access bar 42 and the size and shape of access bar 42 are set independently of each other by different functions. Ogawa explains that: [t]he splitting position of the screen is indicated by a pointer 44. When the pointer 44 is designated with the pen 12 and the pen is moved left or right (along the access bar 42), the splitting ratio (horizontal size ratio) of the two screens 13A, 13B changes as depicted in FIG. 4(C). Ex. 1005 ¶ 19.” slip op. at 29

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Petitioner next contends that it would have been obvious to an ordinarily skilled artisan to modify “Ogawa’s display control method using Yook’s technique such that Ogawa’s method would have included first displaying a program across both logically divided displays of display input surface 13 . . . to increase the viewing area for the program as shown and described [in] Yook’s figures 4b and 4d.” Pet. 54–55 (citing Ex. 1002 ¶ 137). Petitioner further contends that the modification would “include[] minimizing the program to occupy only one of the first and second parts of display input surface 13 . . . as also shown and described with reference to Yook’s figures 4b and 4d.” Id. at 55. Petitioner then provides an example of the modification. Id. Namely, Ogawa’s operation would have been modified so that “when a user elects to split a screen in figure 4(A) using the split screen menu 41, the program is first displayed like in figure 4(C) . . . across two displays and then, based on user input to minimize the program size” resulting in the program displayed on one display. Id. (citing Ex. 1002 ¶ 137; Ex. 1005, Figs. 4(A)–4(C)). Petitioner next contends that the modification of Ogawa with Yook “would have involved the substitution of one known way of displaying a program” as shown in Ogawa “with another known display method” as shown in Yook, “and thus would yield a predictable result.” Pet. 56–57 (citing Ex. 1002 ¶ 139). Patent Owner does not address claim 4. See PO Resp. 10–18. We have reviewed Petitioner’s evidence and argument and find that Petitioner has shown that an ordinarily skilled artisan would have been motivated to combine Ogawa and Yook as a simple substitution of one known way of displaying a program for another with a predictable result. Ex. 1002 ¶ 139. Further, Petitioner has also shown that the combination of Ogawa and Yook teaches the limitations of claim 4. For the foregoing reasons, Petitioner establishes by a preponderance” slip op. at 43

  Patent outcomesUS 8,842,080 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,842,080

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.