• Yealink (USA) Network Technology Co., Ltd. / Yealink Network Technology Co., Ltd. v. Barco NVNo claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00598 · APJ David C Mckone · IPR · Final written decision

  Claims 1–31 were not shown unpatentable under either § 103 ground because the asserted combinations did not teach required claim limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “admissions by Patent Owner in litigation, contends that a person of ordinary skill in the art would have had “a Master of Science (M.S.) degree in electrical engineering or computer science, and five years of work experience in a related field” and that “[a]dditional educational experience could substitute for some of the work experience.” Pet. 5 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art (Petition, 5) at this time.” PO Resp. 6. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is uncontested and is consistent with the technology described in the ’347 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “In the Preliminary Response, “Patent Owner accept[ed] the Petition’s claim construction.” Prelim. Resp. 6. However, in the Patent Owner Response, Patent Owner argues that “the claims of the ’347 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Based on the complete record, we do not find it necessary to provide express claim constructions of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Beel actually discloses the following: [0321] On the peripheral device 32 the video packets are received at the corresponding plug and play port, e.g. the USB port 11, read by the Human Interface Driver (HID) interface handler 13, unpacked to remove HID protocol headers in an unpacker 20 and then transmitted to the communications network by a transmitter 21. The network can be wireless for example WiFi or LiFi network. [0322] Having been routed over a communications network to the base unit 33, the incoming stream is read from the communications interface such as a WiFi access point 22, unpacked in an unpacker 25, decoded in a decoder 26 and then inserted into a suitable composition such as an OpenGL based composition in the compositor 29 for display on a central display device. Ex. 1005 ¶¶ 321–322 (emphasis added to portions quoted by Petitioner). Patent Owner notes that “[t]he Petition mistakenly cites to ¶ 322 of Beel but quotes ¶ 321.” PO Resp. 20 n.3. However, it appears that Petitioner has grafted together a portion of paragraph 321 that introduces peripheral device 32 with a portion of paragraph 322, which discusses features of base unit 33. However, this grafting has been done in such a way as to convey (incorrectly) that peripheral device 32, not base unit 33, includes unpacker 25, decoder 26, and compositor 29 that process the first processed video data received by the first peripheral device to generate second video data. Dr. Almeroth’s testimony, which copies Petitioner’s incorrectly altered quotation to paragraph 322 of Beel, is unreliable as to this claim limitation and is entitled to no weight.4 Thus, Petitioner has no expert testimony on which to rely for this claim limitation.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “5 At the oral argument, when challenged on its reliance on paragraph 322, Petitioner argued that paragraph 321 of Beel teaches this limitation. Tr. 22:26–23:24. Petitioner did not make this argument in the Petition and, instead, raised it for the first time during oral argument; thus, it will not be considered. See Dell Inc. v. Acceleron, LLC, 884 F.3d 1364, 1369 (Fed. Cir. 2018) (“Unless it chose to exercise its waiver authority under 37 C.F.R. § 42.5(b), the Board was obligated to dismiss Dell’s untimely argument given that the untimely argument in this case was raised for the first time during oral argument.”). Even if we were to consider this new argument, it would not be persuasive. As Patent Owner observes (PO Resp. 20), any processing performed by peripheral device 32 in paragraph 321 is on data received from the processing device and destined for the base station via the network, rather than data flowing in the direction of the first processed video data of claim 1.” slip op. at 22

  Patent outcomesUS 11,966,347 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,966,347
• Clearwater Paper Corporation v. Graphic Packaging International LLCAll claims unpatentable
  PTAB · Sep 23, 2026 · IPR2025-00878 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–3 and 11 are unpatentable as anticipated by Cleveland and obvious over Nakagawa and over Nakagawa combined with Tanner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have at least a bachelor’s degree in mechanical or chemical engineering, materials science, polymer science, or equivalent coursework, at least a year of experience developing paper-based laminates involving the application of polymer coatings to a substrate, and the appropriate industry familiarity with biodegradability standards and degradability techniques [and] . . . [l]ess work experience may be compensated by a higher level of education, such as a master’s degree, and vice versa. Pet. 16 (citing Ex. 1003 ¶ 50). Clearwater’s definition is uncontested, and we apply that definition here, as it accords with the level of skill reflected in the asserted prior art and the problems addressed in the specification of the ’126 patent. C. Claim Construction” slip op. at 6

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We have reviewed the cited testimony of Clearwater’s expert, including their calculations for arriving at a coat weight in Nakagawa that falls within the claimed range. See Ex. 1003 ¶¶ 132–33. We find that testimony, which is unrebutted, both credible and supported by the evidence of record. Thus, in light of Clearwater’s contentions, the cited portions of Nakagawa, and the unrebutted testimony of Clearwater’s expert, we are persuaded that Nakagawa discloses or otherwise suggests each and every element of claim 1. See Pet. 45–54, 60–64. Clearwater also persuades us that Cleveland discloses the additional subject matter of dependent claims 2, 3, and 11. See Pet. 64–66. Thus, we determine that Clearwater demonstrates that claims 1–3 and 11 are unpatentable as obvious over Nakagawa. F. Ground 3—Obviousness Over Nakagawa and Tanner” slip op. at 17

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner

    “qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Inst. Dec. 4 n.5. We were persuaded by Clearwater’s proof that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (Ex. 1005) and that the provisional provides written description support for at least claim 1 of Cleveland. See Pet. 18–21 (citing Ex. 1006, 2–6, 9). We were also persuaded by Clearwater’s showing that the provisional provides written support for the subject matter relied upon in Cleveland. Id. at 21–40 (citing Ex. 1006, 1–9). We are still persuaded by Clearwater’s showing. Thus, we see no reason to disturb our earlier finding that Cleveland is prior art to the ’126 patent.” slip op. at 7

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “protectant layers has “a coat weight of from 5 to 30 lbs/3000 ft2.” As noted by Clearwater, Cleveland discloses a total coat weight for layers 14 and 16 as falling within the claimed range. Pet. 32–34 (citing Ex. 1005 ¶ 32). In particular, Cleveland discloses that “the coextruded layer of copolyester (irrespective of which side of the substrate the layer is disposed) is of a total coat weight of between about 10 and about 40 lb/3000 ft2 in any combination of between about 80/20 to 20/80 parts by weight of Ecoflex to Biomax,” of which “a total coat weight of 25 lb/3000 ft2 is preferred.” Ex. 1005 ¶ 32. As disclosed, Cleveland’s total coat weight range of 10–40 lb/3000 ft2 falls almost entirely within the claimed range, and the preferred total coat weight of 25 lb/3000 ft2 falls squarely within the claimed range. Thus, Cleveland satisfies claim elements [1.3.2] and [1.5.2]. See Titanium Metals Corp. v. Banner, 778 F.2d 775, 782 (Fed. Cir. 1985) (“[W]hen, as by a recitation of ranges or otherwise, a claim covers several compositions, the claim is anticipated if one of them is in the prior art.”) (citation omitted). As such, we find that Clearwater adequately demonstrates that Cleveland discloses all the elements of claim 1. 4. Dependent Claims” slip op. at 12

  Patent outcomesUS 8,637,126 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 8,637,126
• Apple Inc. v. Proxense, LLCAll claims unpatentable
  PTAB · Sep 17, 2026 · IPR2025-00562 · APJ Thu A Dang · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious over Giobbi ’157, Giobbi ’139, and Dua; the Board also finds the claims unpatentable under the Broadcom grounds.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) does not applyDecided for petitioner

    “IPR2024-00783, Ex. 1001, 22:36–49. As the Federal Circuit stated, when a disputed claim limitation does not employ “means for” language, the presumption is that each of the terms conveys sufficiently definite structure or act and, thus, is not subject to § 112 ¶ 6. See Dyfan, 28 F.4th at 1367. Based on the record before us, this presumption that each of the terms is not subject to § 112 ¶ 6 is not overcome.” slip op. at 17

  • Skill levelOther

    “differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of non-obviousness. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966).” slip op. at 25

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We find persuasive Dr. Wolfe’s supporting testimony that a POSITA would have understood the terms “PDK” and “RDC” to have “definite structure.” Ex. 1013 ¶¶ 35–56. In particular, we find persuasive Dr. Wolfe’s testimony that the term “PDK,” for example, “encompasses at least ‘a collection of circuit components that includes an antenna, a transceiver, and a controller and memory for storing information particular to a user.’” Id. ¶ 35. Dr. Wolfe’s testimony is consistent with the Specification of the ’188 patent. See Ex. 1001, 5:42–6:7, 3:48–62. In particular, the Specification of the ’188 patent describes a microchip that stores information in memory and responds through an antenna when probed, which is consistent with Dr. Wolfe’s testimony. Id.; Ex. 1001, 1:30–62.” slip op. at 19

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of non-obviousness. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966).” slip op. at 25

  Patent outcomesUS 9,049,188 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,049,188
• Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentable
  PTAB · Sep 3, 2026 · IPR2025-00673 · APJ Michael R Zecher · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over the combined teachings of the asserted references, including Shin and Aoyama and Shimomura and Iwase.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsOther

    “1 SoundClear also filed a Contingent Motion to Amend that proposed to replace originally challenged claim 5 of the ’675 patent with proposed substitute claim 8. Paper 21. We, however, granted SoundClear’s request to withdraw its Contingent Motion to Amend and, as a result, the Contingent Motion to Amend will no longer be considered in this proceeding. Paper 30.” slip op. at 2

  • Skill levelOther

    “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMotivation not foundMixed

    “combination because (1) configuring Shin’s processor 120 accordingly “would have been trivial, involving straightforward changes to enhance the processor’s approach to simplifying and abbreviating its output”; and (2) this approach was well-known as evidenced by Ha’s disclosure of replacing “team meeting” and “date” with “schedules” based on the user’s environment.6 Id. at 27–28 (first quoting Ex. 1011 ¶ 97, then quoting Ex. 1011 ¶ 98) (citing Ex. 1002 ¶ 102; Ex. 1011, Fig. 7).” slip op. at 33

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “4. Dr. Stern’s Testimony is Reliable In its Patent Owner Response, SoundClear contends that “Dr. Stern’s” slip op. at 125

  Patent outcomesUS 11,244,675 unpatentable
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,244,675
• Yealink (USA) Network Technology Co. Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentable
  PTAB · Jul 28, 2026 · IPR2025-00491 · APJ Frederick C Laney · IPR · Final written decision

  Claims 1–18 are unpatentable as obvious over Beel and Dinka, with or without Christison; the Kaplan, Van de Laar, and Christison ground fails for lack of motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Pet. 9–10 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art.” PO Resp. 6. On the complete record, we adopt Petitioner’s proposed definition of a person of ordinary skill in the pertinent art, as it is consistent with the ’972 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededPlain and ordinary meaningDecided for patent owner

    “Rather than addressing Petitioner’s proposals, Patent Owner states “the claims of the ’972 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Our decision in this matter does not turn on resolving any particular differences between the parties’ constructions. Therefore, because only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy, we determine that no claim term requires express construction in this proceeding and that the ordinary and customary meaning of the claim terms apply. See Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019).” slip op. at 11

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “device. The ’972 patent expressly defines endpoints broadly “as data sources or sinks.” Ex. 1001, 7:64–67. And the ’972 patent admits that Beel’s Figure 11 discloses the same endpoints depicted in the ’972 patent’s own Figure 4. Id. at 4:28–33, 16:44–67. Beel’s Figure 11 and accompanying description disclose a “[m]ass storage device 12,” a “USB audio device 14,” and a “USB HID device 13” on the peripheral device. Ex. 1005, Fig. 11, ¶¶ 320–323. Patent Owner’s own declarant conceded that a mass storage device is “a type of endpoint” (Ex. 1034, 43:19–21), and that “audio devices are endpoints” (id. at 57:5–61:4). We give reduced weight to Patent Owner’s contrary position to the extent it rests on the premise that a reference cannot disclose an endpoint unless it uses the word “endpoint” (Ex. 2030 ¶ 94; Ex. 1034, 43:19–44:16, 72:18–73:12); a premise that is inconsistent with the ’972 patent’s own broad definition and with the ’972 patent’s admission regarding Beel’s Figure 11. As additional support not separately emphasized by the parties in this connection, we note Dr. Almeroth’s technical explanation that, for data to pass from a functional device to a peripheral device, “both the functional device and the peripheral device must have ‘endpoints’”—a data source and a data sink—reasoning consistent with the ’972 patent’s definition. Ex. 1002 ¶ 125.” slip op. at 27

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “First, we agree with Patent Owner that, under the ordinary meaning of the claim language, the endpoint is an endpoint of the peripheral device, and that it must be “a data source or a data sink which is able to store or emit data, of the functional device exposed or made available on the first peripheral device.” Ex. 1001, 23:11–17. The limitation thus identifies a structure—an endpoint, residing on the peripheral device, that is a source or sink and that corresponds to (is “of”) the functional device—through which the communication recited in subsequent element (g) is carried out. By its terms, it imposes no requirement as to the direction in which data flows; it requires only that the endpoint be a data “source” or a data “sink” that is able to “store or emit” data. The operative transmit-and-receive communication “from the functional device to the processing device via the . . . endpoint” is recited in subsequent element (g), which we take up separately below. The disputed question under this limitation is therefore the structural one: whether Beel discloses, on the peripheral device, an endpoint that is “of the functional device.” Because the inquiry is structural and non-directional, we are not persuaded that the audio-out orientation of Beel’s described embodiment, on which Patent Owner relies, is dispositive of this limitation. device. The ’972 patent expressly defines endpoints broadly “as data sources or sinks.” Ex. 1001, 7:64–67. And the ’972 patent admits that Beel’s Figure 11 discloses the same endpoints depicted in the ’972 patent’s own Figure 4. Id. at 4:28–33, 16:44–67. Beel’s Figure 11 and accompanying description disclose a “[m]ass storage device 12,” a “USB audio device 14,” and a “USB HID device 13” on the peripheral device. Ex. 1005, Fig. 11, ¶¶ 320–323. Patent Owner’s own declarant conceded that a mass storage device is “a type of endpoint” (Ex. 1034, 43:19–21), and that “audio devices are endpoints” (id. at 57:5–61:4). We give reduced weight to Patent Owner’s contrary position to the extent it rests on the premise that a reference cannot disclose an endpoint unless it uses the word “endpoint” (Ex. 2030 ¶ 94; Ex. 1034, 43:19–44:16, 72:18–73:12); a premise that is inconsistent with the ’972 patent’s own broad definition and with the ’972 patent’s admission regarding Beel’s Figure 11. As additional support not separately emphasized by the parties in this connection, we note Dr. Almeroth’s technical explanation that, for data to pass from a functional device to a peripheral device, “both the functional device and the peripheral device must have ‘endpoints’”—a data source and a data sink—reasoning consistent with the ’972 patent’s definition. Ex. 1002 ¶ 125. Third, we find that the endpoint Beel discloses is a data source or a data sink that is “able to store or emit data, of the functional device.” We begin with the words of the limitation. The endpoint need only be “able to store or emit data”—language of capability, not a requirement that particular data actually traverse the endpoint in operation, and still less in a particular direction. And the endpoint is defined by the character of the data it handles: it is “a data source or a data sink,” which the ’972 patent instructs An audio endpoint, so understood, is characterized as an audio source or sink; its structure is not tied to any single instance of an audio device. On that understanding, Beel’s disclosure establishes the required capability directly. Beel discloses that “audio data is captured through a virtual sound card interface added as a logical device over the physical interface provided in the peripheral device,” Ex. 1005 ¶ 43, that the peripheral device “acts as a composite device comprising for instance a (virtual) audio speaker device,” id. ¶ 317, and that “audio data is captured at this interface . . . internally in the peripheral device 32” and streamed over the communications network, id. ¶ 319. Beel thus shows the endpoint on the peripheral device actually storing and emitting audio—and, correspondingly, video—data, which is the very type of data produced and consumed by the audio/visual functional devices connected to the base unit, including the microphones, cameras, speakers, and displays. Id. ¶ 120. An endpoint shown to store or emit audio and video data is necessarily one that is “able to store or emit” such data; the capability the limitation requires is thus established by Beel’s disclosure.” slip op. at 26

  Patent outcomesUS 10,684,972 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,684,972
• Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00565 · APJ Michael R Zecher · IPR · Final written decision

  Claims 1–5 are unpatentable because Amazon showed they are anticipated by Shin; the Board did not reach Amazon’s contingent obviousness ground over Shin.

  RulingsFinal written decision

  • BurdenOther

    “Written Decision under 35 U.S.C. § 318(a) as to the patentability of claims 1–5 of the ’337 patent. For the reasons we identify below, we hold that Amazon has demonstrated by a preponderance of the evidence that these claims are unpatentable.” slip op. at 2

  • Skill levelOther

    “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

  Patent outcomesUS 11,069,337 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,069,337
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Luxottica Of America, Inc. v. E-Vision Smart Optics, Inc.Adverse judgment
  PTAB · Jun 29, 2026 · IPR2025-01512 · APJ Arthur M Peslak · IPR · Adverse judgment

  The Board granted Patent Owner’s request for adverse judgment, cancelled claims 1–27, and terminated the proceeding.

  RulingsAdverse judgment

  • Adverse judgmentAdverse judgmentGranted

    “A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). Under these circumstances, entry of judgment adverse to the Patent Owner is appropriate as to claims 1–27 of the ’612 patent. Consequently, we grant Patent Owner's request for adverse judgment.” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
  None
  Patents in suitUS 11,971,612
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.