• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentable
  PTAB · Sep 1, 2026 · IPR2025-00914 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over Menon, Trefethen, RS6000, and POEref.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and We adopt the Petition’s formulation of the level of ordinary skill in the art, which is consistent with the ’679 patent, the prior art of record, and the testimony of both experts.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Petition relies on the ordinary and customary meaning of the claim terms consistent with the Phillips standard. Pet. 12–13 (citing 37 C.F.R. § 42.100(b)). The Petition also addresses the construction of “peer-to-peer architecture” recited in independent claim 1 of the ’679 patent, a limitation we need not construe to resolve the parties’ dispute in this proceeding. Id. at 13; see, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Owner relies on the ordinary and customary meaning of the claim terms consistent with the Phillips standard without further analysis. Resp. 7.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “RS6000 with Menon, namely because RS6000 provides an overview of the IBM SP2 multiprocessor and Menon teaches the use of “IBM SP2, a modern high performance distributed memory multiprocessor” used in the MultiMATLAB system. Id. at 24–25 (citing Ex. 1003 ¶¶ 142–145; Ex. 1005, 5–6, 14; Ex. 1007, 1, 11). The Petition also explains why POEref pertains to the field of cluster computing in a parallel operating environment. Id. at 26 (citing Ex.1008, 11 (“PE Software is designed to run on an … RS/6000 network cluster”)); (further citing Ex. 1001, 1:14–15; Ex. 1003 ¶¶ 146–149). The Petition contends that a POSITA would have been motivated to combine the teachings of POEref with Menon “because Menon suggests the combination by teaching that MultiMATLAB uses ‘POE, IBM's Parallel Operating Environment.’” Id. at 26–27 (citing Ex. 1005, 6); (further citing Ex. 1003 ¶¶ 150–153; Ex. 1005, 14; Ex. 1008, 11, 46). We agree with Petitioner’s analysis. We find the Petition’s argument and evidence of a motivation to combine the asserted prior art references in the manner claimed to be compelling, persuasive, consistent with the disclosures in the references, which include internal cross-references to each other, and supported by the expert testimony of Dr. Bajaj.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). Patent Owner argues that Menon teaches away from a combination with Trefethen because “Menon expressly states that Trefethen’s first-generation architecture is inadequate for the objectives that motivated the newer design.” Resp. 35–37. The evidence does not support Patent Owner’s position. First, Patent Owner’s teaching away argument is inconsistent with the strong evidence of a motivation to combine Menon and Trefethen discussed above. Second, Patent Owner’s teaching away argument is contrary to the evidence of record for the reasons given in Petitioner’s Reply. Reply 13–15 (e.g., “Menon explicitly cites Trefethen and explains that Menon builds on the teachings of Trefethen.”) (citing Pet. 22; Ex. 1003 ¶ 70; Ex. 1005, 1–3; Ex. 1163 ¶¶ 47–53). We are further persuaded by Dr. Bajaj’s reply testimony: the “MultiMATLAB teachings in Trefethen. In fact, Menon describes enhancing the system of Trefethen. For example, Menon describes a list of “goals” already achieved by MultiMATLAB and then states that the architecture has been “redesigned to achieve two further goals.” One of these two “further goals” is “extensibility,” which Menon achieves by its description of adding “MEX routines” to the system of Trefethen. Far from showing an “incompatibility” between Menon and Trefethen as the POR argues, Menon’s addition of the “MEX routines” to MultiMATLAB shows that such a modification was within the capabilities of a POSITA, because the authors of the Menon paper actually implemented the modification. Ex. 1163 ¶ 49 (citing Ex. 1005, 1–3). Dr. Bajaj’s testimony is unrebutted, credible, and supported by the record. We agree with Dr. Bajaj’s reasoning, which is based on direct quotes in Menon. We further agree with Dr. Bajaj’s conclusion that Menon does not teach away from the combination with Trefethen. Id. ¶¶ 50–52. Menon’s description of building on and enhancing the teachings of Trefethen—the earlier work of the same research group at Cornell—by adding MEX routines to achieve high-performance parallel computing and extensibility for MATLAB, demonstrates a classic motivation for a POSITA to combine the teachings of Menon and Trefethen. RS6000 and POEref are specifically referenced in Menon-Trefethen and add operational details of the parallel operating platform that teach a POSITA how to implement the MultiMATLAB system with a reasonable expectation of success. Such facts are inconsistent with Patent Owner’s teaching away and lack of motivation arguments.” slip op. at 24

  Patent outcomesUS 12,021,679 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 12,021,679
• Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentable
  PTAB · Aug 26, 2026 · IPR2025-00913 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–30 are unpatentable: claims 1–25, 27–28, and 30 as obvious over Menon, Trefethen, RS6000, and POEref; claims 26 and 29 over those references plus MPIref.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and experience of a POSITA. We adopt the Petition’s formulation of the level of ordinary skill in the art, which is consistent with the ’034 patent, the prior art of record, and the testimony of both experts.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “processor,” “multi-core” processor, or “singular ‘hardware processor’ that ‘comprises’ (or ‘with’) multiple ‘processing cores’” as Patent Owner contends. Resp. 11–12, 21; see also Ex. 1163 ¶ 22 (“The claim does not recite ‘single chip,’ ‘single package,’ ‘single die,’ or ‘single multi-core microprocessor.’”). Nor do the claims recite a plurality of processing cores “within” a single-chip package or read as “multi-core within a processor” as argued by Patent Owner. Resp. 12–14; Sur-Reply 2; see Reply 6 (citing Ex. 1163 ¶ 23 (“Thus, the phrase ‘with a plurality of processing cores’ identifies the required processing resources associated with the hardware processor; it does not import a packaging limitation.”)). The claims do recite a hardware processor “with” a plurality of processing cores; a critical distinction even Patent Owner reads as open-ended, i.e., as a hardware processor that “comprises” a plurality of processing cores. See Resp. 11 (“the claims require a singular ‘hardware processor’ that ‘comprises’ (or ‘with’) multiple ‘processing cores’”). Consequently, the claim language does not support Patent Owner’s proposed construction of “a . . . hardware processor with a plurality of processing cores” as a single multi-core processor. cores it contains” in reliance on a parsed description in the ’034 patent specification: The specification explains: “Each processor can contain one or more processor cores that are capable of single-threaded execution. Processor cores are generally independent microprocessors, but more than one can be included in a single-chip package.” Id. at 1212 (partially quoting Ex. 1001, 5:11–16); Sur-Reply 2. The quoted description does not support Patent Owner’s contention that the claimed “a . . . hardware processor with a plurality of processing cores” must be limited to a “single multi-core processor” that “locates multiple cores within a ‘single-chip package,’” i.e. limited to a single multi-core microprocessor such as “a Core 2 Duo is one processor package with two cores.” Resp. 12– 13, 21 (citing Ex. 1001, 7:15–25). The description quoted above from column 5, moreover, describes a “processor” that “can contain one or more processor cores” each of which can be an independent microprocessor. Reply 2–3 (citing Ex. 1001, 5:11–16; Ex. 1163 ¶¶ 10–14). As Petitioner emphasizes, the specification distinguishes a “processor” from a “microprocessor” and describes a “processor” that “can be one or more general purpose single-core or multi-core microprocessors,” rather than limiting a “processor” to a single multi-core microprocessor. Reply 3–5 (citing Ex. 1001, 7:14–36, Fig. 1; Ex. 1163 ¶¶ 15–18).” slip op. at 13

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “art because they pertain to the same “field of cluster computing” as the ’034 patent and “are reasonably pertinent to the problem of the ’034 patent, namely, executing a single program on multiple nodes.” Pet. 22 (citing Ex. 1001, 1:14–15; Ex. 1003, ¶¶ 65–69; Ex. 1005, 2; Ex. 1006, Abstract). The Petition emphasizes that Menon expressly cites and builds on the MultiMATLAB system taught by Trefethen. Id. (citing Ex. 1003 ¶ 71; Ex. 1005, 1–2). The Petition contends that: combination of prior art elements according to known methods (executing MATLAB code on a multiprocessor system) to yield the predictable result discussed in both papers: the MultiMATLAB system executing MATLAB in parallel to perform mathematical calculations. Id. at 22–23 (citing Ex. 1003 ¶ 70; Ex. 1005, Abstract; Ex. 1006, 2–7). The Petition further contends that a POSITA would have found it predictable to combine Trefethen with Menon with a reasonable expectation of success “because researchers had a strong desire to parallelize MATLAB.” Id. at 23–24 (citing Ex. 1003 ¶ 73; Ex. 1005, 2; Ex. 1006, 11–12.)” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “A POSITA would have had an especially strong reason to read these references together because they address the same project, the same MATLAB-based parallel-computing problem, and the same MultiMATLAB command environment. Menon expressly identifies Trefethen’s MultiMATLAB work and then describes a redesigned architecture that preserves the same user-level objective––parallel MATLAB computations—while improving implementation details and extensibility. A POSITA therefore would not view the references as mutually exclusive alternatives. Rather, a POSITA would understand Trefethen as teaching specific MultiMATLAB commands and examples, including Eval, Send, Recv, and the architecture was implemented and improved in a later version. Ex. 1163 ¶¶ 71–72 (emphases added). We find the above reasoning persuasive and adopt it as our own. Petitioner and Dr. Bajaj demonstrate a sound technical motivation for a POSITA—someone having a bachelor’s degree in computer science, computer engineering, or electrical engineering and two years of experience working in the field of cluster computing or parallel processing—to combine Menon and Trefethen: to improve MATLAB’s operational performance and extensibility in a parallel operating environment. Menon builds on Trefethen to improve and extend the parallel processing capabilities of MultiMATLAB: “This system will enable users to access high-performance parallel routines from within the MATLAB environment, to extend the environment with new parallel routines, and to use these routines to develop parallel applications with the MATLAB language.” Ex. 1005 Abstract. Menon is intended to be read in conjunction with Trefethen, as would be expected from two references generated by the same research group at the same university addressed to the same technical subject matter about a year apart. Ex. 1005, 1; Ex. 1006, Ex. 1086 ¶¶ 65, 101, 102. The very first citation in Menon is to Trefethen. Ex. 1005, 2, 16.” slip op. at 30

  Patent outcomesUS 11,570,034 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,570,034
• Apple Inc. v. Ferid AllaniAll claims unpatentable
  PTAB · Aug 25, 2026 · IPR2025-00857 · APJ Jeffrey S Smith · IPR · Final written decision

  Claims 1–27 are unpatentable: claims 24 and 26 over Rossmann and Himmel; claims 1–2, 4–6, 10–23, 25, and 27 over Rossmann, Himmel, King, and Adar; claims 3 and 7–9 over those references and Boyle.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “we consider the type of problems encountered in the art, the prior art solutions to those problems, the rapidity with which innovations are made, the sophistication of the technology, and the educational level of active workers in the field. See Custom Accessories, Inc. v. Jeffrey-Allan Industries, Inc., 807 F.2d 955, 962 (Fed. Cir. 1986); see Orthopedic Equip. Co. v. United States, 702 F.2d 1005, 1011 (Fed. Cir. 1983).” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “meaning of “icon” as claimed, including the dependent claims, the specification, the prosecution history, and the extrinsic evidence including expert testimony and dictionary definitions, we determine that the plain meaning of “icon” is readily apparent from the claims themselves. See Phillips, 415 F.3d at 1314 (“In some cases, the ordinary meaning of claim language as understood by a person of ordinary skill in the art may be readily apparent even to lay judges.”). We find that the plain meaning of “icon” as claimed encompasses at least “textual elements” because claim 20 recites “the icons comprise textual elements.” See id. (“Other claims of the patent in question, both asserted and unasserted, can also be valuable sources of enlightenment as to the meaning of a claim term.”). We highlight that the additional intrinsic evidence cited by the parties is consistent with the plain meaning. For example, Figures 1 and 2 of the specification show icons comprising textual elements. As another example, during prosecution of the ’058 patent, the Examiner found that the claimed icons were taught by textual hyperlinks. Ex. 1002, 586, 592. In order to overcome the Examiner’s rejection and obtain an allowance (id. at 641–50), applicant subsequently amended the claims to recite “specifically designed,” thus implicitly conceding to the Examiner’s interpretation of icon as encompassing textual hyperlinks. Id. at 625–640; see PO Resp. 43–44 (citing Ex. 1002, 626–27, 645–46) (acknowledging that the Examiner allowed the claims because applicant amended the claims to recite “specifically designed for containing a set of icons.”).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed petitioner constructionDecided for petitioner

    “Requiring an element to be "specifically designed" for another element narrows the claim because it requires more than the first element being merely capable of being used with the second element. The term "configured to" is generally construed narrowly to mean "made to" and "designed to" rather than broadly to require merely "capable of". See In re Giannelli, 739 F. 3d 1375, 1379-80 (Fed. Cir. 2014) (the phrase "configured to" requires more than "mere capability." Rather, that term is synonymous with "made to" and "designed to."). However, rather than use "configured to", in order to avoid any confusion as to the narrower scope of the claims as amended, Applicant herein directly and explicitly requires "designed to." In re Giannelli at 1379-80 (Fed. Cir. 2014) (reversing an obviousness rejection because (1) the claims were properly construed narrowly to mean "designed to" and not broadly to encompass merely "capable of", and (2) the USPTO had not explained the motivation for modifying the prior art to meet the "design to" requirement) See also MPEP 2111.04, citing to In re Giannelli, for the proposition that a claim can be narrowed to require that it be "designed and constructed to be used" in a specific manner (as a rowing machine in the case of In re Giannelli). Logan has not been specifically designed and constructed in the required manner, so it does not cure all deficiencies of the primary reference Iki (which lacks any tree menu structure). Logan describes only "remote web" pages 90, 95 that are merely pages retrieved from Web browsing and stored in a web computer 25. Iki as modified by Logan would result on in a tree menu structure wherein not all levels of the tree included the required selection pages specifically designed for containing the claimed set of icons. Ex. 1002, 626–27 (emphasis omitted).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Petitioner contends that a person of ordinary skill in the art would have modified Rossmann to include several advantages expressly taught by Himmel: Himmel’s consumer hot list bookmark set for the benefits of providing a user with a consistent user interface when accessing a website; to simplify navigation for the user by providing an additional navigation aid; to provide more immediate access to commonly used web actions; to reduce the network traffic required to navigate through webpages to arrive at a particular web function; and to reduce usage charges and data usage. Pet. 22–23 (citing Ex. 1003 ¶¶ 94–99; Ex. 1004, 2:38–56, 12:24–34, 14:35–44; Ex. 1005, 18:63–65, 20:11–16). Petitioner contends that modifying Rossmann’s Figures 4A through 4G to include Himmel’s consumer hot list bookmark set yields each selection page including both selection icons for navigating to other local pages along with direct access icons such as on sale today to directly navigate to a predetermined web site to perform a common web action. Id. at 23–25 (citing Ex. 1003 ¶¶ 96–100; Ex. 1004, Figs. 4D–F). Petitioner contends that the selection page of Rossmann as modified by the bookmark set of Himmel teaches a first locally stored page specifically designed to include a direct access icon because the selection page is “used to include” a direct access icon, such as on sale today, and that during use, this selection page is programmed to display the set of direct access icons for selection by the user. Pet. 25 (citing Ex. 1003 ¶¶ 96–100); see id. at 21–24. Petitioner contends that a person of ordinary skill in the art would have had a reasonable expectation of success because technology for bookmarking websites and web actions was known at the time of invention, modifying Rossmann to utilize known bookmark manager software would have been straight forward, Rossmann already includes hardware and programming instructions to access a web server, and Himmel teaches that known prior art methods utilized both selection and direct access icons on a single page. Id. at 25–26 (citing Ex. 1003 ¶¶ 101–103; Ex. 1004, 2:38–41, 14:21–44; Ex. 1005, Fig. 6A, 21:27–34).” slip op. at 19

  Patent outcomesUS 10,943,058 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,943,058
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Google LLC v. Brodti Inc.All claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00472 · APJ Stephen E Belisle · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious under § 103 over Nicholas, Laidlaw, Mayadas, and Error, with Yasnovsky added for claims 7, 8, 16, 17, and 20.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Petitioner’s and Patent Owner’s definitions for the level of ordinary skill in the art are substantially similar. In light of the record before us, we adopt Patent Owner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’898 patent and the prior art of record, we determine that the definition offered by Patent Owner comports with the qualifications a person would have needed to understand and implement the teachings of the ’898 patent and the prior art, particularly experience pertaining to Internet/web interfaces and web-based media. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). Neither party argues, nor do we determine, that the outcome of our Decision depends on which party’s definition is selected.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “includ[e] a server and one or more webpages that may be provided by the server for display in a web browser.” Pet. Reply 5 (citing Ex. 1026 ¶¶ 13–15). Petitioner argues, and we agree, that the Specification strongly supports this construction (requiring a server and webpage(s)) by describing a “website” as synonymous with a server computer system: “The WWW [(World Wide Web)] service allows a server computer system (i.e., Web server or Web site) to send graphical Web pages or screens of information such as the advertising materials to a remote client computer system 10.” Ex. 1001, 3:66–4:2 (emphases added); see id. at Fig. 1 (depicting a service engine and webpages as a web server, i.e., website), 3:15–18 (describing Figure 1 as showing “a server of the website” (emphasis added)); Pet. Reply 5; see Ex. 1026 ¶ 13. Petitioner also submits a supporting (and persuasive) contemporaneous technical dictionary definition of “website,” which highlights the distinction between a lay person’s understanding of the term versus that of the relevant artisan. Pet. Reply 5–6. This definition explains that the “common but technically inaccurate” usage of “website” is to mean “Web page,” but the technically correct usage of “website” is to mean “one or more computers that are associated with a fully qualified domain name and make content available on the Web.” Id. (citing Ex. 1028, 402). Petitioner’s expert, Dr. Crovella, likewise testifies that “[a] website cannot exist without the server or computer that provides its webpages.” Ex. 1026 ¶ 15; see Ex. 1027, 36:8–20 (Patent Owner’s expert, Dr. Myler, agreeing that “it has to be some machine somewhere that’s providing the webpages for the website.”). The limitations of claim 1 also support Petitioner’s position that “website” includes a server and webpage(s). Reply 5. For example, claim 1 recites advertising material for “populat[ing] on one or more websites,” and selected “advertising buy options comprise at least one website of the respective websites.” Ex. 1001, 10:29–51 (emphases added). We find these limitations make the most technical sense where “website” implicates an Internet domain or domain name, such as brodti.com, which itself is a computer system (server) and associated webpage(s) reached via that domain name. This interpretation aligns with testimony of Patent Owner’s expert, Dr. Myler, in which he states that a “website” describes “a group of webpages at a particular domain (e.g., www.espn.com, www.espn.com/nba, www.espn.com/nfl, www.espn.com/nhl).” Ex. 2009 ¶ 68 (emphasis in italics added). In other words, brodti.com and espn.com are two different websites, with each website having one or more webpages (e.g., www.espn.com/nba, www.espn.com/nfl), and such websites include a server giving life to such webpage(s). slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “Patent Owner proffers that placing advertising material “within” web property content means “inserting” an advertisement into particular content. PO Resp. 12. Petitioner responds that “placing . . . within” means what it says, and notes that “[t]he words ‘insert’ or ‘inserting’ appear nowhere in the [Specification].” Pet. Reply 7–8; see id. at 8 (Petitioner arguing that Patent Owner’s expert “admitted that the claim does not specify details regarding how advertising material needs to be placed within web property content.” (citing Ex. 1027, 29:18–24)). Patent Owner replies that the relevant artisan allegedly “would have understood ‘placing . . . within’ to mean ‘inserting into,’” but then submits that whether “placing . . . within” versus “inserting into” is used does not matter because Petitioner allegedly has not demonstrated the obviousness of either. PO Sur-reply 17. As Petitioner observes, “[i]t is unclear if Patent Owner intended any difference in meaning between these two terms.” Pet. Reply 8. Accordingly, based on the complete record before us, we determine that no further construction of this limitation is needed, and “placing A within B” means what it says—“placing A within B.”” slip op. at 20

  • Expert testimonyPetitioner expert creditedOther

    “determining” of impression validity feature of limitation 1[h] by disclosing “a ‘single-pixel’ image technique for determining that an impression is valid,” e.g., by using “cookies.” Pet. 42–45. Petitioner’s expert, Dr. Crovella, testifies that this “single-pixel” impression tracking technique would have been a “well-known” technique to the relevant artisan, and as described by Error, operates as follows: [A] URL link for a single pixel (or transparent) image file is embedded onto a webpage that is delivered to a web browser. The image is not meant to be viewed and will likely not be visible to the user. After the user’s browser receives the webpage, it uses the embedded URL link to request the single-pixel image from a server. The receipt of that request by the server provides an indication that the user’s web browser actually received and presented the web page to the user. Ex. 1002 ¶ 133 (citing Ex. 1007, 1:36–54, 2:6–21); see id. at ¶¶ 132–139. slip op. at 43

  Patent outcomesUS 11,416,898 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,416,898
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.