- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentablePTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision
Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15
- Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed
“nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15
Patent outcomesUS 11,581,322 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,581,322 - PTAB · Dec 12, 2025 · IPR2025-01116 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over Sudre, Lee, and Penven.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023). In other words, a decision to institute under § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). In addition, if the Board institutes trial, it will “institute . . . on all grounds in the petition.” PTAB Consolidated Trial Practice Guide, 5–6 (Nov. 2019)1 (“CTPG”); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least (1) a Bachelor’s Degree (or higher) in material science, materials engineering, mechanical engineering, textile engineering, or a related field, and (2) a minimum of two years of working experience in textiles engineering, fibers and textiles manufacturing, or a related field.” Pet. 4 (citing Ex. 1003 ¶¶ 21–22). Petitioner also argues that “[a]dditional education could substitute for professional experience, and vice versa.” Id. On the present record, Patent Owner does not contest Petitioner’s proposed level of ordinary skill. Prelim. Resp. 25–26. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’566 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Both parties argue that no claim terms require express construction at this stage of the proceeding. Pet. 3; Prelim. Resp. 26. On the present record, we agree. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent the parties’ arguments regarding unpatentability do address claim construction issues, we address these issues below.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“articulated a reason why a person of ordinary skill in the art would have combined the teachings of Sudre, Lee, and Penven. Prelim. Resp. 60–63. In particular, Patent Owner argues that a person of ordinary skill in the art “would not have been motivated to look into Penven to modify the teachings of Lee because Lee and Penven disclose substantially different structures.” Id. at 60–61. This argument does not address Petitioner’s proposed reason to combine, which looks to Lee and Penven each to modify Sudre, not to Penven to modify Lee. See Pet. 79–81. In addition, “[c]ombining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). In other words, “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425–26 (CCPA 1981). Petitioner provides “some articulated reasoning with some rational underpinning” to combine the teachings of Sudre with those of Lee and Penven. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). In particular, Petitioner directs us to Sudre’s teaching of “a method for manufacturing PMC,” to Sudre’s lack of teaching of “specific parameters, such as warp thread size and spacing” to satisfy the “particular requirements” of its fabric. Pet. 79 (citing Ex. 1003 ¶¶ 248–250; Ex. 1004, 1:2–5, 6:14–17). As Petitioner points out, id. at 79–80, Lee and Penven provided yarn diameters and loop diameters that were conventional, and there is evidence of record that a person of ordinary skill in the art would have used these conventional diameters in constructing Sudre’s paper machine clothing. Ex. 1003 ¶¶ 258–261, 263–266; Ex. 1006, 3:64–66.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,261,566 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision
Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20
Patent outcomesUS 10,015,413 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,015,413 - PTAB · Nov 6, 2025 · PGR2025-00040 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–9, 11–33, and 35–38 on all petition grounds, finding it more likely than not that Hassfjell-Hoff anticipates at least claim 1.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 324(a), a post-grant review may be instituted only if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’437 patent is eligible for post-grant review and that it is more likely than not that at least one challenged claim of the ’437 patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of all challenged claims of the ’437 patent.” slip op. at 2
- Adverse judgmentAdverse judgmentOther
“Here, Patentee Sciencons AS filed a statutory disclaimer of claims 10 and 34 of the ’437 patent. Ex. 2001; Prelim. Resp. 43. Based on our review of Exhibit 2001 and the Office’s public records, we find that the disclaimer of claims 10 and 34 complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Accordingly, we treat claims 10 and 34 as having never been part of the ’437 patent. See Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because post-grant review cannot be instituted based on disclaimed claims, claims 10 and 34 are outside the scope of this proceeding. 37 C.F.R. § 42.207(e) (“No post-grant review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claims 1–9, 11–33, and 35– 38, the remaining challenged claims that have not been disclaimed.” slip op. at 6
- PTAB / AIA Trials › Real party in interest / privityGranted
“Sciencons AS also states that ARTBIO, Inc. is responsible for defending the ’437 patent in this proceeding and requests that ARTBIO, Inc. be included in the caption for this proceeding.2 Paper 4, 1. ARTBIO, Inc. has signed powers of attorney appointing the same practitioners that were appointed by Sciencons AS to transact all business associated with the instant post-grant review review of the ’437 patent. See Paper 3. To date, no objection has been raised to Patent Owner’s request. Given Sciencons AS’s representation that ARTBIO, Inc. is currently the exclusive licensee of the ’437 patent and is responsible for defending the ’437 patent, we grant Sciencons AS’s unopposed request that ARTBIO, Inc. be included in the caption. For convenience we refer to Sciencons AS and the purported exclusive licensee ARTBIO, Inc. collectively as “Patent Owner.” As stated supra, to the extent any party disputes ARTBIO, Inc.’s right to participate in this proceeding or to be included in the caption, the party shall request authorization to brief the issue within 10 business days of this Decision.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“nuclear chemistry, radiochemistry, or materials science, or a comparable field of study, plus approximately two to three years of professional experience with radioisotope generators, radiopharmaceutical chemistry, nuclear medicine, or other relevant industry experience” and that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 2–3 (citing Ex. 1002 ¶ 33; Ex. 1019 ¶ 27). At this stage of the proceeding, Patent Owner does not dispute Petitioner’s proposed definition nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposed definition of a POSITA.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 12,249,437 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentablePTAB · Oct 23, 2025 · IPR2024-00790 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–3 are unpatentable as obvious over Kim; claims 4 and 5 were not shown unpatentable over the asserted grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“SuperGuide, 358 F.3d at 875 (“We review the patent’s written description and drawings to confirm that the patentee’s own use of the disputed term is consistent with the meaning given to it by the court.”). The ’031 patent teaches that dielectric pairs of different tiers are etched to form staircases extending along the x-y plane. Ex. 1001, 13:27–28. As described above (§ I.D, supra), dielectric filling structure 311 is formed by depositing a dielectric filling material to fill the space remaining after portions of dielectric stack 203 are removed to form staircase structure 303. Id. at 13:36–41; see also id. at 22:63–65 (“Memory structure 1200 can be formed by forming dielectric filling structure 1201 to fill the space formed by the removal of portions of dielectric stack 1003.”) The ’031 patent then teaches that excess dielectric filling material overlying the topmost surface of staircase structure 303 is removed using a suitable planarization method. Id. at 13:41–44; see also 22:67–23:5 (performing a planarization process to remove excess dielectric filling structure 1201 over the top surface of memory structure 1200). According to the ’031 patent, the portion of the deposited dielectric filling material that remains “over staircase structure 303 and isolation layer 109” forms “dielectric filling structure 311 that surrounds staircase structure 303.” Id. at 13:44–48 (emphasis added); see also id. at 1:56–58 (stating in “some embodiments, the memory device also includes a filling structure surrounding the multiple-stack staircase structure”). structure is etched along the x-, y-, and z-axes, and the dielectric filling structure fills the spaces in the x-, y-, and z-directions created when the staircase structure is etched. Because the excess portion of the dielectric filling structure overlying the top of the staircase structure is removed, what remains is dielectric filling structure in the spaces around the staircase structure in the x-, y-, and z-planes. In this way, the ’031 patent teaches that the dielectric filling structure surrounds, i.e., is all around or encircles, the staircase structure.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline” with “2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices,” or “an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 22–23. Petitioner further contends that a “POSITA would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. at 23 (citing Ex. 1003 ¶¶ 41–44). Patent Owner states that it does not object to the definition of a POSITA proffered by Petitioner. PO Resp. 13–14 (citing Pet. 22). In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’031 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed
“Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableDecided for patent owner
“Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23
Patent outcomesUS 10,868,031 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,868,031 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentablePTAB · Oct 22, 2025 · IPR2024-00794 · APJ Michael T Cygan · IPR · Final written decision
Claims 1 and 6 are unpatentable over Park; claims 2–5 and 7–11 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 19 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to this assessment, arguing that its claims are valid regardless of the precise definition. PO 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. skill, as it appears to be consistent with the specification of the ’623 patent and the prior art of record.” slip op. at 5
- Expert testimonyPetitioner expert discountedMixed
“the Petition, Petitioner’s approach to Shibata’s drive circuit and Park’s dummy channel/open region teachings results in a deficiency in its showing of reasonable expectation of success for its expressed combination of extending Park’s insulative trenches to replace some of its common source lines. Petitioner relies solely on the fact that the references are capable of performing the relied-upon functions or could possess the relied-upon structure. See, e.g., Pet. Reply 19–20 (stating, “If Shibata accommodates this type of trench . . . there is no reason Park cannot as well,” and “Park itself already presents a variety of ways to minimize any etching problem that may be encountered when using wet etching”). But Park does not describe its dummy channel or open region teachings as generally applicable to all of its embodiments. And Petitioner needs to show a reason why the application of Shibata would be reasonably expected to have been successfully applied in Park, not merely state that there is “no reason” to expect that it would not be successful. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018) (finding that even where two structures have “the same physical structure,” applying the teachings of one structure to the other requires “additional, reasoned analysis.”). The knowledge of one skilled in the art cannot bridge this gap, because these are inventive features of Park and Shibata. Furthermore, Petitioner also has not sufficiently explained, for any of its proposed augmentations, how metal gate deposition would occur sufficiently in the most remote regions of the long, parallel insulating layers in Petitioner’s Park-Shibata combination of such regions to avoid the risk of incomplete gate electrode layers in the final memory device that Patent Owner argues would result in a significant trade-off in memory device accuracy, and device scalability. PO Resp. 68 (citing Ex. 2010 ¶ 145). For example, Dr. Lee addresses only etching issues, not deposition issues. Ex. 1025, ¶¶ 32–47.” slip op. at 46
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We agree with Petitioner. As pointed out by Patent Owner, the “trenches formed in the BSG” language of claim 1 reflects specific description of the gate-first method of manufacturing, but not the gate-last method of manufacturing. Ex. 1001, 7:17–19 (“referring to Fig. 1A, one or more first dielectric trenches . . . are formed in the one or more BSGs”). However, as Petitioner points out, the claims are to a memory “device,” not to a method of manufacturing or a device produced by specific manufacturing steps. Pet. Reply 1. During prosecution of the application that matured into the ’623 patent, the Examiner determined that the device of claim 1 was distinct from a separately claimed method of manufacturing and The Examiner’s requirement stated that the memory device of claim 1 is not limited by the disclosed process of manufacture because “the process claims require . . . deposition steps of polysilicon whereas the product claims do not require any polysilicon.” Id. Applicant agreed “without traverse” with the Examiner’s determination and selected to pursue only the “device” claims. Id. at 596 (“Applicant elects, without traverse, Invention I, Claims 1–11, drawn to a device”).4 The distinctiveness is also supported by the discussion in the ’623 patent of “formed in the BSG” that describes its device separately from its method of formation. The ’623 patent describes that “[i]n the disclosed memory device, one or more first dielectric trenches are formed in the BSG and extend in a length direction of the substrate to separate the BSG into a plurality of sub-BSGs.” Ex. 1001, 2:25–28. This description precedes, and is separate from, its description of an aspect of a process for manufacturing a memory device in which the BSG layer is formed and then “dielectric trenches are formed” that may “pass through the BSG layer” so that the “BSG layer is separated by the one or more first dielectric trenches into a plurality of sub-BSG layers.” Id. at 3:30–45. The description of the device having trenches formed in the BSG, which is not limited to a particular manufacturing process, further supports Petitioner’s contention that the “formed in the BSG” language is not limited to a particular manufacturing embodiment.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“We do not agree that such arguments support Patent Owner’s conclusion. Patent Owner acknowledges that two portions of a BSG that are connected at a small opening are not separated because both portions remain electrically connected to each other. Id. at 17 (stating, “common source regions 52a is merely in the middle of a single sub-BSG 2 (‘SUB-BLK2’) and does not divide it into further sub-BSGs because there is an H-cut 72 that connects the two sides of the common source region such that both regions are part of the same sub-BSG”) (citing Ex. 1001, 9:15–19, 9:41–44) (emphasis omitted); Ex. 1026, 34:4–15, 41:23–42:16 (Dr. Kuhn attesting that common source regions may isolate adjacent BSGs). Patent Owner considers other portions of the BSG to be separated into sub-BSGs because there is no such connection between the sub-BSG portions. Id. at 17–18 (annotating Ex. 1001, Fig. 1B). Under such reasoning, the addition of a trench closing a gap between two neighboring BSG portions, thereby breaking the electrical connection therebetween, would “separate” the two BSG portions into further sub-BSGs. In its obviousness assertions, Petitioner argues for such an interpretation of the claim. See Pet. Reply 10 (“Park’s layers 111 electrically separate its BSG”). Based on the above, we determine that the phrase “dielectric trenches formed in the BSG and extending in a length direction of the substrate to perform electrical separation between sub-BSGs, but does not require that the trenches act alone, extending from one end of the device to the other across the entire BSG. Similarly, the trenches need not have any particular length, and need only to have some length that performs that separation.” slip op. at 13
Patent outcomesUS 10,950,623 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,950,623 - Advancell Pty Ltd.InstitutedPTAB · Oct 14, 2025 · PGR2025-00029 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–6 and 8–20 on all asserted grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“After reviewing the parties’ briefs and supporting evidence, we determine that Petitioner has sufficiently shown that Hassfjell-Hoff discloses each element of claim 1. As such, Petitioner’s argument and evidence as set forth above and further discussed below, sufficiently shows that it is more likely than not that claim 1 is anticipated by Hassfjell-Hoff, notwithstanding Patent Owner’s arguments, also addressed below.” slip op. at 16
- Adverse judgmentAdverse judgmentOther
“Here, Patentee Sciencons AS filed a statutory disclaimer of claim 7 of the ’603 patent. Ex. 2001. Based on our review of Exhibit 2001 and U.S. Patent and Trademark Office public records, we find that the disclaimer of claim 7 complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Accordingly, we treat claim 7 as having never been part of the ’603 patent. See Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because post-grant review cannot be instituted based on disclaimed claims, claim 7 is outside the scope of this proceeding. 37 C.F.R. § 42.207(e) (“No post-grant review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claims 1–6 and 8– 20, the remaining challenged claims that have not been disclaimed.” slip op. at 7
- PTAB / AIA Trials › Real party in interest / privityGranted
“Sciencons AS also states that ARTBIO, Inc. is responsible for defending the ’603 patent in this proceeding and requests that ARTBIO, Inc. be included in the caption for this proceeding.2 Paper 4, 1; Paper 7, 1. ARTBIO, Inc. has signed powers of attorney appointing the same practitioners that were appointed by Sciencons AS to transact all business associated with the instant post-grant review proceeding of the ’603 patent. See Papers 3, 4, 7, 8. To date, no objection has been raised to Patent Owner’s request. Given Sciencons AS’s representation that ARTBIO, Inc. is currently the exclusive licensee of the ’603 patent and is responsible for defending the ’603 patent, we grant Sciencons AS’s unopposed request that ARTBIO, Inc. be included in the caption. For convenience we refer to Sciencons AS and the purported exclusive licensee ARTBIO, Inc. collectively as “Patent Owner.” As stated supra, to the extent any party disputes ARTBIO, Inc.’s right to participate in this proceeding or to be included in the caption, the party shall request authorization to brief the issue within 10 business days of this Decision.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a bachelor’s degree in chemistry, chemical engineering, physics, nuclear chemistry, radiochemistry, or materials science, or a comparable field of study, plus approximately two to three years of professional experience with radioisotope generators, or other relevant industry experience” and that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 2–3 (citing Ex. 1002 ¶ 33; Ex. 1017 ¶ 27). At this stage of the proceeding, Patent Owner does not dispute Petitioner’s proposed definition nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposed definition.” slip op. at 10
§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 12,125,603 - PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution
Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,745,847
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.